This paper proposes an adaptive howling canceller using notch filter and 2-tap linear predictor, where howling consists of a single sinusoidal signal whose magnitude is much greater than other frequency’s magnitudes....This paper proposes an adaptive howling canceller using notch filter and 2-tap linear predictor, where howling consists of a single sinusoidal signal whose magnitude is much greater than other frequency’s magnitudes. The employed 2-tap linear predictor can quickly detect howling due to its high convergence speed. Although the output signal of the 2-tap linear predictor cannot be directly used as one of a howling canceller, we can obtain the frequency of howling from the filter coefficient. We utilize the filter coefficient of the 2-tap linear predictor to design a notch filter which achieves a very narrow elimination band. The designed notch filter removes only howling and retains other desired signals. Simulation results show that the proposed adaptive howling canceller can quickly detect and effectively remove howling.展开更多
It has been shown in various papers that most interior-point algorithms for linear optimization and their analysis can be generalized to P_＊（κ） linear complementarity problems.This paper presents an extension of t...It has been shown in various papers that most interior-point algorithms for linear optimization and their analysis can be generalized to P_＊（κ） linear complementarity problems.This paper presents an extension of the recent variant of Mehrotra＇s second order algorithm for linear optimijation.It is shown that the iteration-complexity bound of the algorithm is O（4κ ＋ 3）√14κ ＋ 5 nlog（x0）Ts0/ε,which is similar to that of the corresponding algorithm for linear optimization.展开更多
Mehrotra-type predictor-corrector algorithm, as one of most efficient interior point methods, has become the backbones of most optimization packages. Salahi et al. proposed a cut strategy based algorithm for linear op...Mehrotra-type predictor-corrector algorithm, as one of most efficient interior point methods, has become the backbones of most optimization packages. Salahi et al. proposed a cut strategy based algorithm for linear optimization that enjoyed polynomial complexity and maintained its efficiency in practice. We extend their algorithm to P. （~） linear complementar- ity problems. The way of choosing corrector direction for our algorithm is different from theirs： The new algorithm has been proved to have an O（（1 ＋ 4k）（17 ＋ 19k）√1＋2kn 3/2 log（x0）Ts0/ε） worst case iteration complexity bound. An numerical experiment verifies the feasibility of the new algorithm.展开更多
For conservative linear homogeneous nonholonomic systems, there exists a cotangent bundle with the symplectic structure dπμ∧ dξμ, in which the motion equations of the system can be written into the form of the ca...For conservative linear homogeneous nonholonomic systems, there exists a cotangent bundle with the symplectic structure dπμ∧ dξμ, in which the motion equations of the system can be written into the form of the canonical equations by the set of quasi-coordinates πμand quasi-momenta ξμ. The key to construct this cotangent bundle is to define a set of suitable quasi-coordinates πμby a first-order linear mapping, so that the reduced configuration space of the system is a Riemann space with no torsion. The Hamilton–Jacobi method for linear homogeneous nonholonomic systems is studied as an application of the quasi-canonicalization. The Hamilton–Jacobi method can be applied not only to Chaplygin nonholonomic systems, but also to non-Chaplygin nonholonomic systems. Two examples are given to illustrate the effectiveness of the quasi-canonicalization and the Hamilton–Jacobi method.展开更多
This paper presents a probabilistic methodology for linear fracture mechanics analysis of cracked structures. The main focus is on probabilistic aspect related to the nature of crack in material. The methodology invol...This paper presents a probabilistic methodology for linear fracture mechanics analysis of cracked structures. The main focus is on probabilistic aspect related to the nature of crack in material. The methodology involves finite element analysis; sta- tistical models for uncertainty in material properties, crack size, fracture toughness and loads; and standard reliability methods for evaluating probabilistic characteristics of linear elastic fracture parameter. The uncertainty in the crack size can have a significant effect on the probability of failure, particularly when the crack size has a large coefficient of variation. Numerical example is presented to show that probabilistic methodology based on Monte Carlo simulation provides accurate estimates of failure prob- ability for use in linear elastic fracture mechanics.展开更多
Today, Linear Mixed Models (LMMs) are fitted, mostly, by assuming that random effects and errors have Gaussian distributions, therefore using Maximum Likelihood (ML) or REML estimation. However, for many data sets, th...Today, Linear Mixed Models (LMMs) are fitted, mostly, by assuming that random effects and errors have Gaussian distributions, therefore using Maximum Likelihood (ML) or REML estimation. However, for many data sets, that double assumption is unlikely to hold, particularly for the random effects, a crucial component </span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">in </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">which assessment of magnitude is key in such modeling. Alternative fitting methods not relying on that assumption (as ANOVA ones and Rao</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">’</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">s MINQUE) apply, quite often, only to the very constrained class of variance components models. In this paper, a new computationally feasible estimation methodology is designed, first for the widely used class of 2-level (or longitudinal) LMMs with only assumption (beyond the usual basic ones) that residual errors are uncorrelated and homoscedastic, with no distributional assumption imposed on the random effects. A major asset of this new approach is that it yields nonnegative variance estimates and covariance matrices estimates which are symmetric and, at least, positive semi-definite. Furthermore, it is shown that when the LMM is, indeed, Gaussian, this new methodology differs from ML just through a slight variation in the denominator of the residual variance estimate. The new methodology actually generalizes to LMMs a well known nonparametric fitting procedure for standard Linear Models. Finally, the methodology is also extended to ANOVA LMMs, generalizing an old method by Henderson for ML estimation in such models under normality.展开更多
An alternative method of solving Lagrange＇s first-order partial differential equation of the form（a1x ＋b1y＋C1z）p＋ （a2x ＋b2y＋c2z）q =a3x ＋b3y＋c3z,where p = Эz/Эx, q = Эz/Эy and ai, bi, ci （i = 1,2,3） a...An alternative method of solving Lagrange＇s first-order partial differential equation of the form（a1x ＋b1y＋C1z）p＋ （a2x ＋b2y＋c2z）q =a3x ＋b3y＋c3z,where p = Эz/Эx, q = Эz/Эy and ai, bi, ci （i = 1,2,3） are all real numbers has been presented here.展开更多
This paper focuses on linear-quadratic(LQ)optimal control for a class of systems governed by first-order hyperbolic partial differential equations(PDEs).Different from most of the previous works,an approach of discret...This paper focuses on linear-quadratic(LQ)optimal control for a class of systems governed by first-order hyperbolic partial differential equations(PDEs).Different from most of the previous works,an approach of discretization-then-continuousization is proposed in this paper to cope with the infinite-dimensional nature of PDE systems.The contributions of this paper consist of the following aspects:(1)The differential Riccati equations and the solvability condition of the LQ optimal control problems are obtained via the discretization-then-continuousization method.(2)A numerical calculation way of the differential Riccati equations and a practical design way of the optimal controller are proposed.Meanwhile,the relationship between the optimal costate and the optimal state is established by solving a set of forward and backward partial difference equations(FBPDEs).(3)The correctness of the method used in this paper is verified by a complementary continuous method and the comparative analysis with the existing operator results is presented.It is shown that the proposed results not only contain the classic results of the standard LQ control problem of systems governed by ordinary differential equations as a special case,but also support the existing operator results and give a more convenient form of computation.展开更多
文摘This paper proposes an adaptive howling canceller using notch filter and 2-tap linear predictor, where howling consists of a single sinusoidal signal whose magnitude is much greater than other frequency’s magnitudes. The employed 2-tap linear predictor can quickly detect howling due to its high convergence speed. Although the output signal of the 2-tap linear predictor cannot be directly used as one of a howling canceller, we can obtain the frequency of howling from the filter coefficient. We utilize the filter coefficient of the 2-tap linear predictor to design a notch filter which achieves a very narrow elimination band. The designed notch filter removes only howling and retains other desired signals. Simulation results show that the proposed adaptive howling canceller can quickly detect and effectively remove howling.
基金supported by the Natural Science Foundation of Hubei Province of China(2008CDZ047)
文摘It has been shown in various papers that most interior-point algorithms for linear optimization and their analysis can be generalized to P_＊（κ） linear complementarity problems.This paper presents an extension of the recent variant of Mehrotra＇s second order algorithm for linear optimijation.It is shown that the iteration-complexity bound of the algorithm is O（4κ ＋ 3）√14κ ＋ 5 nlog（x0）Ts0/ε,which is similar to that of the corresponding algorithm for linear optimization.
基金Supported by the Natural Science Foundation of Hubei Province(Grant No.2008CDZ047)
文摘Mehrotra-type predictor-corrector algorithm, as one of most efficient interior point methods, has become the backbones of most optimization packages. Salahi et al. proposed a cut strategy based algorithm for linear optimization that enjoyed polynomial complexity and maintained its efficiency in practice. We extend their algorithm to P. （~） linear complementar- ity problems. The way of choosing corrector direction for our algorithm is different from theirs： The new algorithm has been proved to have an O（（1 ＋ 4k）（17 ＋ 19k）√1＋2kn 3/2 log（x0）Ts0/ε） worst case iteration complexity bound. An numerical experiment verifies the feasibility of the new algorithm.
基金National Natural Science Foundation of China(Grant Nos.11972177,11972122,11802103,11772144,11872030,and 11572034)the Scientific Research Starting Foundation for Scholars with Doctoral Degree of Guangdong Medical University(Grant Nos.B2019042 and B2019021).
文摘For conservative linear homogeneous nonholonomic systems, there exists a cotangent bundle with the symplectic structure dπμ∧ dξμ, in which the motion equations of the system can be written into the form of the canonical equations by the set of quasi-coordinates πμand quasi-momenta ξμ. The key to construct this cotangent bundle is to define a set of suitable quasi-coordinates πμby a first-order linear mapping, so that the reduced configuration space of the system is a Riemann space with no torsion. The Hamilton–Jacobi method for linear homogeneous nonholonomic systems is studied as an application of the quasi-canonicalization. The Hamilton–Jacobi method can be applied not only to Chaplygin nonholonomic systems, but also to non-Chaplygin nonholonomic systems. Two examples are given to illustrate the effectiveness of the quasi-canonicalization and the Hamilton–Jacobi method.
文摘This paper presents a probabilistic methodology for linear fracture mechanics analysis of cracked structures. The main focus is on probabilistic aspect related to the nature of crack in material. The methodology involves finite element analysis; sta- tistical models for uncertainty in material properties, crack size, fracture toughness and loads; and standard reliability methods for evaluating probabilistic characteristics of linear elastic fracture parameter. The uncertainty in the crack size can have a significant effect on the probability of failure, particularly when the crack size has a large coefficient of variation. Numerical example is presented to show that probabilistic methodology based on Monte Carlo simulation provides accurate estimates of failure prob- ability for use in linear elastic fracture mechanics.
文摘Today, Linear Mixed Models (LMMs) are fitted, mostly, by assuming that random effects and errors have Gaussian distributions, therefore using Maximum Likelihood (ML) or REML estimation. However, for many data sets, that double assumption is unlikely to hold, particularly for the random effects, a crucial component </span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">in </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">which assessment of magnitude is key in such modeling. Alternative fitting methods not relying on that assumption (as ANOVA ones and Rao</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">’</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">s MINQUE) apply, quite often, only to the very constrained class of variance components models. In this paper, a new computationally feasible estimation methodology is designed, first for the widely used class of 2-level (or longitudinal) LMMs with only assumption (beyond the usual basic ones) that residual errors are uncorrelated and homoscedastic, with no distributional assumption imposed on the random effects. A major asset of this new approach is that it yields nonnegative variance estimates and covariance matrices estimates which are symmetric and, at least, positive semi-definite. Furthermore, it is shown that when the LMM is, indeed, Gaussian, this new methodology differs from ML just through a slight variation in the denominator of the residual variance estimate. The new methodology actually generalizes to LMMs a well known nonparametric fitting procedure for standard Linear Models. Finally, the methodology is also extended to ANOVA LMMs, generalizing an old method by Henderson for ML estimation in such models under normality.
文摘An alternative method of solving Lagrange＇s first-order partial differential equation of the form（a1x ＋b1y＋C1z）p＋ （a2x ＋b2y＋c2z）q =a3x ＋b3y＋c3z,where p = Эz/Эx, q = Эz/Эy and ai, bi, ci （i = 1,2,3） are all real numbers has been presented here.
基金supported by the National Natural Science Foundation of China under Grant Nos.61821004 and 62250056the Natural Science Foundation of Shandong Province under Grant Nos.ZR2021ZD14 and ZR2021JQ24+1 种基金Science and Technology Project of Qingdao West Coast New Area under Grant Nos.2019-32,2020-20,2020-1-4,High-level Talent Team Project of Qingdao West Coast New Area under Grant No.RCTDJC-2019-05Key Research and Development Program of Shandong Province under Grant No.2020CXGC01208.
文摘This paper focuses on linear-quadratic(LQ)optimal control for a class of systems governed by first-order hyperbolic partial differential equations(PDEs).Different from most of the previous works,an approach of discretization-then-continuousization is proposed in this paper to cope with the infinite-dimensional nature of PDE systems.The contributions of this paper consist of the following aspects:(1)The differential Riccati equations and the solvability condition of the LQ optimal control problems are obtained via the discretization-then-continuousization method.(2)A numerical calculation way of the differential Riccati equations and a practical design way of the optimal controller are proposed.Meanwhile,the relationship between the optimal costate and the optimal state is established by solving a set of forward and backward partial difference equations(FBPDEs).(3)The correctness of the method used in this paper is verified by a complementary continuous method and the comparative analysis with the existing operator results is presented.It is shown that the proposed results not only contain the classic results of the standard LQ control problem of systems governed by ordinary differential equations as a special case,but also support the existing operator results and give a more convenient form of computation.
