In complex feed structures, there exist main chemical functional groups which are associated with nutrient utilization and availability and functionality. Each functional group has unique molecular structure therefore...In complex feed structures, there exist main chemical functional groups which are associated with nutrient utilization and availability and functionality. Each functional group has unique molecular structure therefore produce unique molecular vibration spectral profile. Feed processing has been used to improve nutrient utilization for many years. However, to date, there was little study on processing-induced changes of feed intrinsic structure and functional groups on a molecular basis within intact tissue. This is because limited research technique is available to study inherent structure on a molecular basis. Recently bioanalytical techniques： such as Synchrotron Infrared Microspectroscopy as well as Diffuse Reflectance Infrared Fourier Transform molecular spectroscopy have been developed. These techniques enable to detect molecular structure change within intact tissues. These techniques can prevent destruction or alteration of the intrinsic protein structures during processing for analysis. However, these techniques have not been used in animal feed and nutrition research. The objective of this review was show that with the advanced technique, sensitivity and responses of functional groups to feed processing on a molecular basis could be detected in my research team. These functional groups are highly associated with nutrient utilization in animals.展开更多
Evaluation on nitrogen removal of step-feed anoxic/oxic activated sludge process at the standpoint of reaction kinetics and process kinetics was conducted. Theoretical biological nitrogen removal efficiency was deduce...Evaluation on nitrogen removal of step-feed anoxic/oxic activated sludge process at the standpoint of reaction kinetics and process kinetics was conducted. Theoretical biological nitrogen removal efficiency was deduced based on the mass balance of nitrate in the last stage. The comparison of pre-denitrification process and step feed process in the aspects of nitrogen removal efficiency, volume of reactor and building investment was studied, and the results indicated that step-feed anoxic/oxic activated sludge process was superior to pre-denitrification process in these aspects.展开更多
Control of sludge age and mixed liquid suspended solids concentration in the activated sludge process is critical for ensuring effective wastewater treatment. A nonlinear dynamic model for a step-feed activated sludge...Control of sludge age and mixed liquid suspended solids concentration in the activated sludge process is critical for ensuring effective wastewater treatment. A nonlinear dynamic model for a step-feed activated sludge process was developed in this study. The system is based on the control of the sludge age and mixed liquor suspended solids in the aerator of last stage by adjusting the sludge recycle and wastage flow rates respectively. The simulation results showed that the sludge age remained nearly constant at a value of 16 d in the variation of the influent characteristics. The mixed liquor suspended solids in the aerator of last stage were also maintained to a desired value of 2500 g/m3 by adjusting wastage flow rates.展开更多
On the basis of regressional relationship between nutritional indexes and technological conditions,when confronted with feed quality that contains multiple nutritional indexes,a comprehensive equation of evaluating fe...On the basis of regressional relationship between nutritional indexes and technological conditions,when confronted with feed quality that contains multiple nutritional indexes,a comprehensive equation of evaluating feed quality was developed by using fuzzy mathematical method at first in this study,and then the optimum technological conditions were established by introduction of statistical frequency analysis method pursuant to the comprehensive evaluating equation mentioned above compared with conventional multi-aim nonlinear programming,this method can lead to easy solutions,and also can make adjustment of the importance of nutritional indexes to feed quality according to practical considerations.An example was given of soybean extruding to show how the method worked.展开更多
The simultaneous nitrification and denitrification in step-feeding biological nitrogen removal process were investigated under different influent substrate concentrations and aeration flow rates. Biological occurrence...The simultaneous nitrification and denitrification in step-feeding biological nitrogen removal process were investigated under different influent substrate concentrations and aeration flow rates. Biological occurrence of simultaneous nitrification and denitrification was verified in the aspect of nitrogen mass balance and alkalinity. The experimental results also showed that there was a distinct linear relationship between simultaneous nitrification and denitrification and DO concentration under the conditions of low and high aeration flow rate. In each experimental run the floc sizes of activated sludge were also measured and the results showed that simultaneous nitrification and denitrification could occur with very small size of floc.展开更多
This paper investigates the thermal-coupled effect across the wall and the optimal heat transfer region of the wall for enhancing the energy saving effect of dividing wall column (DWC), and also studies the effects of...This paper investigates the thermal-coupled effect across the wall and the optimal heat transfer region of the wall for enhancing the energy saving effect of dividing wall column (DWC), and also studies the effects of feed thermal condition (q) and middle component composition of feed (cB) on the heat transfer process, the optimal heat transfer region, and the maximum heat transfer quantity across the wall. The simulation results show that the maximum heat transfer quantity across the wall and the potential for energy saving increase with the increase of q, while with the limitation of temperature difference across the wall, the beneficial heat transfer effect between certain range of stages, which are involved in the optimal heat transfer region, cannot be realized completely for a specific value of q. Besides, compared with q, a changing cB does not change the degree of realizing the beneficial heat transfer effect, but can bring about the variation of liquid split ratio (RL) and vapor split ratio (Rv). Thus, for achieving a maximum energy-saving effect of DWC, different q and cB need to find its own corresponding suitable heat transfer process across the wall.展开更多
Aflatoxin contamination and rancidity in locally processed commercial fish feeds and ingredients along value chains is a Public and Animal health hazard. The study established the level of aflatoxin contamination, per...Aflatoxin contamination and rancidity in locally processed commercial fish feeds and ingredients along value chains is a Public and Animal health hazard. The study established the level of aflatoxin contamination, peroxide value (PV), Anisidine value (AnV), and their associated factors at storage areas among farmers, processors, traders, factories, and landing sites in the Wakiso and Kampala districts. The value chain actors were purposively selected in a cross-sectional study based on access to the feed store and the use of locally processed commercial fish feeds on farms. Data collected were statistically analyzed in SPSS version 20. All the samples (45) were positive for aflatoxin contamination and PV with 51% (23/45) of samples being contaminated with “above acceptable” aflatoxin levels and 66.6% (30/45) of samples with “above acceptable” PV. The overall percentage of “above acceptable” AnV was 11/29 (37.9%). Samples from factories were within acceptable contamination levels. Multivariate logistic regression analysis revealed no significant difference between aflatoxin contamination, peroxide, and Anisidine value with storage factors for locally processed commercial fish feeds and ingredients. The study recommended the purchase of fish feeds from factories and a larger study on storage factors responsible for aflatoxin contamination and rancidity in fish feeds in Uganda.展开更多
Natural grassland is an important grazing place for farmers. The traditional mode of animal husbandry will lead to overgrazing. The ecological environment of grassland will not only be seriously damaged, but also grad...Natural grassland is an important grazing place for farmers. The traditional mode of animal husbandry will lead to overgrazing. The ecological environment of grassland will not only be seriously damaged, but also gradually deteriorate. With the passage of time, the quality of the original high-quality forage grass will drop significantly, which will also provide convenient conditions for the growth of other harmful weeds. Therefore, in the process of development, the traditional mode will be changed, and the structure of animal husbandry and breeding industry will be adjusted. Artificial grass planting will actively carry out the processing of scientifically modulated grass, so that better silk products can be produced, and the growth and development needs of animals can be met. Taking Yulin city in Shaanxi province as an example, this paper discussed and analyzed the technology of forage cultivation and forage processing.展开更多
The soybean peptide has the trait of amino acid balance,digestible and easy to absorb,low allergy and low antigenicity.Furthermore,it also showed the feature of good mobility and thermal stability at high concentratio...The soybean peptide has the trait of amino acid balance,digestible and easy to absorb,low allergy and low antigenicity.Furthermore,it also showed the feature of good mobility and thermal stability at high concentrations.This paper seeks to study the processing and nutritional characteristics of soybean peptide.And on that basis to lucubrate soybean peptide as a safe,efficient feedstuffs additives.The aim is to improve the feedstuffs quality.展开更多
The inter-electrode gap(IEG) is an essential parameter for the anode shaping process in electrochemical machining(ECM) and directly affects the machining accuracy. In this paper, the IEG during the leveling process of...The inter-electrode gap(IEG) is an essential parameter for the anode shaping process in electrochemical machining(ECM) and directly affects the machining accuracy. In this paper, the IEG during the leveling process of an oval anode workpiece in counter-rotating ECM(CRECM)is investigated. The variation of the minimum IEG is analyzed theoretically, and the results indicate that rather than reaching equilibrium, the minimum IEG in CRECM expands constantly when a constant feed speed is used for the cathode tool. This IEG expansion leads to a poor localization effect and has an adverse influence on the roundness of the machined workpiece. To maintain a small constant IEG in CRECM, a variable feed speed is used for the cathode based on a fitted equation. The theoretical results show that the minimum IEG can be controlled at a small value by using an accelerated feed speed. Experiments have been conducted using a specific experimental apparatus in which the cathode tool is designed as a combined structure of two sectors and a thin sheet. By detecting the machining currents flowing through the minimum IEG, how the latter varies is obtained indirectly. The results indicate that using an accelerated feed speed is effective for controlling the IEG, thereby improving the roundness of the machined workpiece.展开更多
This paper proposes a down-stroke abrasive belt grinding under micro feeding for noise reduction surface.Firstly,a physical model of processing under micro feeding for noise reduction structure was established.Based o...This paper proposes a down-stroke abrasive belt grinding under micro feeding for noise reduction surface.Firstly,a physical model of processing under micro feeding for noise reduction structure was established.Based on the flexible contact characteristics of abrasive belt grinding and Hertz contact theory,a mathematical model suitable for this method was established,considering vibration and abrasive belt wear.Secondly,a simulation analysis was carried out.Then,an experimental platform was built to analyze the influence of process parameters on surface roughness and surface microstructure,with the model verified.Finally,the propeller with pit structure was simulated,and the noise reduction performance of the propeller under this method and general abrasive belt grinding was compared and analyzed.The results show that the maximum error of the model based on proposed method does not exceed 10%,and the coincidence degree of the minimum error point can reach 90%at lower feed speed and higher linear velocity of the abrasive belt.The noise reduction effect of the propeller with pit-shaped surfaces can reach 35%.Through the above analysis,the proposed method can be used for the processing of noise reduction surfaces.展开更多
Agarases are hydrolytic enzymes that act on the hydrolysis of agar and have a broad range of applications in food,cosmetics and pharmaceutical industries. In this study, a glycerol feeding strategy based on induction ...Agarases are hydrolytic enzymes that act on the hydrolysis of agar and have a broad range of applications in food,cosmetics and pharmaceutical industries. In this study, a glycerol feeding strategy based on induction mode optimization for high cell density and β-agarase production was established, which could effectively control acetate yield. First, exponential feeding strategy of glycerol with different overall specific growth rates（μ） was applied in the pre-induction phase. The results showed that the low μ（μ=0.2） was suggested to be the optimal for cell growth and β-agarase production. Second, the effects of induction temperature and the inducer concentration on cell growth and β-agarase production were investigated in the post-induction phase. When induced by isopropyl-β-d-thiogalactoside（IPTG）, the strategy of 0.8 mmol/L IPTG induction at 20℃ was found to be optimal for β-agarase production. When cultivation was induced by continuous lactose feeding strategy of 1.0 g/（L·h）, the β-agarase activity reached 112.5 U/mL, which represented the highest β-agarase production to date.Furthermore, the β-agarase was capable of degrading G. lemaneiformis powder directly to produce neoagarooligosaccharide, and the hydrolysates were neoagarotetraose（NA4） and neoagarohexaose（NA6）. The overall research may be useful for the industrial production and application of β-agarase.展开更多
Friction stir processing （FSP）, a variation of FSW （friction stir welding） is an emerging surface engineering technology that can locally eliminate casting defects and refine microstructures, thereby improving the...Friction stir processing （FSP）, a variation of FSW （friction stir welding） is an emerging surface engineering technology that can locally eliminate casting defects and refine microstructures, thereby improving the mechanical properties of material. FSP can also produce fine grained microstructures through the thickness to impart superplasticity. The technology involves plunging a rapidly rotating, non consumable tool, comprising a profiled pin and larger diameter shoulder, into the surface and then traversing the tool across the surface. The pin and the shoulder friction heat the surface which alters the grain structure in the processed area thereby improving the mechanical properties. This paper presents the effects of FSP on microstructure and mechanical properties of extruded cast 2285 aluminum alloy at three different feed rates viz. 10, 12 and 15 mm/min. With the increase in the feed speed the material was observed to have increased impact strength. FSP also increased the tensile and yield strengths with increases in hardness and ductility values also. The observation has been listed in detail and pictorially represented.展开更多
Based on the developed neural-fuzzy control system for anaerobic hybrid reactor （AHR） in wastewater treatment and biogas production, the neural network with backpropagation algorithm for prediction of the variables ...Based on the developed neural-fuzzy control system for anaerobic hybrid reactor （AHR） in wastewater treatment and biogas production, the neural network with backpropagation algorithm for prediction of the variables pH, alkalinity （Alk） and total volatile acids （TVA） at present day time t was used as input data for the fuzzy logic to calculate the influent feed flow rate that was applied to control and monitor the process response at different operations in the initial, overload influent feeding and the recovery phases. In all three phases, this neural-fuzzy control system showed great potential to control AHR in high stability and performance and quick response. Although in the overloading operation phase II with two fold calculating influent flow rate together with a two fold organic loading rate （OLR）, this control system had rapid response and was sensitive to the intended overload. When the influent feeding rate was followed by the calculation of control system in the initial operation phase I and the recovery operation phase III, it was found that the neural-fuzzy control system application was capable of controlling the AHR in a good manner with the pH close to 7, TVA/Alk 〈 0.4 and COD removal 〉 80% with biogas and methane yields at 0.45 and 0.30 m^3/kg COD removed.展开更多
基金supported by grants from the Natural Sciences and Engineering Research Council of Canada (NSERC)SaskCanola Funding+1 种基金Saskatchewan Agricultural Development Fund (ADF)Ministry of Agriculture Strategic Research Chair Fund (Saskatchewan,Canada)
文摘In complex feed structures, there exist main chemical functional groups which are associated with nutrient utilization and availability and functionality. Each functional group has unique molecular structure therefore produce unique molecular vibration spectral profile. Feed processing has been used to improve nutrient utilization for many years. However, to date, there was little study on processing-induced changes of feed intrinsic structure and functional groups on a molecular basis within intact tissue. This is because limited research technique is available to study inherent structure on a molecular basis. Recently bioanalytical techniques： such as Synchrotron Infrared Microspectroscopy as well as Diffuse Reflectance Infrared Fourier Transform molecular spectroscopy have been developed. These techniques enable to detect molecular structure change within intact tissues. These techniques can prevent destruction or alteration of the intrinsic protein structures during processing for analysis. However, these techniques have not been used in animal feed and nutrition research. The objective of this review was show that with the advanced technique, sensitivity and responses of functional groups to feed processing on a molecular basis could be detected in my research team. These functional groups are highly associated with nutrient utilization in animals.
文摘Evaluation on nitrogen removal of step-feed anoxic/oxic activated sludge process at the standpoint of reaction kinetics and process kinetics was conducted. Theoretical biological nitrogen removal efficiency was deduced based on the mass balance of nitrate in the last stage. The comparison of pre-denitrification process and step feed process in the aspects of nitrogen removal efficiency, volume of reactor and building investment was studied, and the results indicated that step-feed anoxic/oxic activated sludge process was superior to pre-denitrification process in these aspects.
基金The National Hi Tech Development Program (863) of China(No.2003AA601110) and the National Natural Science Foundation Key Item of China(No.50138010)
文摘Control of sludge age and mixed liquid suspended solids concentration in the activated sludge process is critical for ensuring effective wastewater treatment. A nonlinear dynamic model for a step-feed activated sludge process was developed in this study. The system is based on the control of the sludge age and mixed liquor suspended solids in the aerator of last stage by adjusting the sludge recycle and wastage flow rates respectively. The simulation results showed that the sludge age remained nearly constant at a value of 16 d in the variation of the influent characteristics. The mixed liquor suspended solids in the aerator of last stage were also maintained to a desired value of 2500 g/m3 by adjusting wastage flow rates.
文摘On the basis of regressional relationship between nutritional indexes and technological conditions,when confronted with feed quality that contains multiple nutritional indexes,a comprehensive equation of evaluating feed quality was developed by using fuzzy mathematical method at first in this study,and then the optimum technological conditions were established by introduction of statistical frequency analysis method pursuant to the comprehensive evaluating equation mentioned above compared with conventional multi-aim nonlinear programming,this method can lead to easy solutions,and also can make adjustment of the importance of nutritional indexes to feed quality according to practical considerations.An example was given of soybean extruding to show how the method worked.
基金Project supported by the Key International Cooperative Program of NSFC(No. 50521140075)the Hi-Tech Research and Development Program(863)of China(No. 2004AA601020)the Attached Projects of"863"Project of Beijing Municipal Science and Technology(No.20005186040421).
文摘The simultaneous nitrification and denitrification in step-feeding biological nitrogen removal process were investigated under different influent substrate concentrations and aeration flow rates. Biological occurrence of simultaneous nitrification and denitrification was verified in the aspect of nitrogen mass balance and alkalinity. The experimental results also showed that there was a distinct linear relationship between simultaneous nitrification and denitrification and DO concentration under the conditions of low and high aeration flow rate. In each experimental run the floc sizes of activated sludge were also measured and the results showed that simultaneous nitrification and denitrification could occur with very small size of floc.
基金supported by the Natural Science Research Youth Foundation of Hebei Higher Education of China [QN2016084]the National Natural Science Foundation of China[21878066]
文摘This paper investigates the thermal-coupled effect across the wall and the optimal heat transfer region of the wall for enhancing the energy saving effect of dividing wall column (DWC), and also studies the effects of feed thermal condition (q) and middle component composition of feed (cB) on the heat transfer process, the optimal heat transfer region, and the maximum heat transfer quantity across the wall. The simulation results show that the maximum heat transfer quantity across the wall and the potential for energy saving increase with the increase of q, while with the limitation of temperature difference across the wall, the beneficial heat transfer effect between certain range of stages, which are involved in the optimal heat transfer region, cannot be realized completely for a specific value of q. Besides, compared with q, a changing cB does not change the degree of realizing the beneficial heat transfer effect, but can bring about the variation of liquid split ratio (RL) and vapor split ratio (Rv). Thus, for achieving a maximum energy-saving effect of DWC, different q and cB need to find its own corresponding suitable heat transfer process across the wall.
文摘Aflatoxin contamination and rancidity in locally processed commercial fish feeds and ingredients along value chains is a Public and Animal health hazard. The study established the level of aflatoxin contamination, peroxide value (PV), Anisidine value (AnV), and their associated factors at storage areas among farmers, processors, traders, factories, and landing sites in the Wakiso and Kampala districts. The value chain actors were purposively selected in a cross-sectional study based on access to the feed store and the use of locally processed commercial fish feeds on farms. Data collected were statistically analyzed in SPSS version 20. All the samples (45) were positive for aflatoxin contamination and PV with 51% (23/45) of samples being contaminated with “above acceptable” aflatoxin levels and 66.6% (30/45) of samples with “above acceptable” PV. The overall percentage of “above acceptable” AnV was 11/29 (37.9%). Samples from factories were within acceptable contamination levels. Multivariate logistic regression analysis revealed no significant difference between aflatoxin contamination, peroxide, and Anisidine value with storage factors for locally processed commercial fish feeds and ingredients. The study recommended the purchase of fish feeds from factories and a larger study on storage factors responsible for aflatoxin contamination and rancidity in fish feeds in Uganda.
文摘Natural grassland is an important grazing place for farmers. The traditional mode of animal husbandry will lead to overgrazing. The ecological environment of grassland will not only be seriously damaged, but also gradually deteriorate. With the passage of time, the quality of the original high-quality forage grass will drop significantly, which will also provide convenient conditions for the growth of other harmful weeds. Therefore, in the process of development, the traditional mode will be changed, and the structure of animal husbandry and breeding industry will be adjusted. Artificial grass planting will actively carry out the processing of scientifically modulated grass, so that better silk products can be produced, and the growth and development needs of animals can be met. Taking Yulin city in Shaanxi province as an example, this paper discussed and analyzed the technology of forage cultivation and forage processing.
文摘The soybean peptide has the trait of amino acid balance,digestible and easy to absorb,low allergy and low antigenicity.Furthermore,it also showed the feature of good mobility and thermal stability at high concentrations.This paper seeks to study the processing and nutritional characteristics of soybean peptide.And on that basis to lucubrate soybean peptide as a safe,efficient feedstuffs additives.The aim is to improve the feedstuffs quality.
基金supported by the National Natural Science Foundation of China (51535006, 51805259)Natural Science Foundation of Jiangsu Province of China (BK20180431)+2 种基金Fundamental Research Funds for the Central Universities of China (3082018NP2018406)Young Elite Scientists Sponsorship Program by CAST of ChinaJiangsu Key Laboratory of Precision and Micro-Manufacturing Technology of China
文摘The inter-electrode gap(IEG) is an essential parameter for the anode shaping process in electrochemical machining(ECM) and directly affects the machining accuracy. In this paper, the IEG during the leveling process of an oval anode workpiece in counter-rotating ECM(CRECM)is investigated. The variation of the minimum IEG is analyzed theoretically, and the results indicate that rather than reaching equilibrium, the minimum IEG in CRECM expands constantly when a constant feed speed is used for the cathode tool. This IEG expansion leads to a poor localization effect and has an adverse influence on the roundness of the machined workpiece. To maintain a small constant IEG in CRECM, a variable feed speed is used for the cathode based on a fitted equation. The theoretical results show that the minimum IEG can be controlled at a small value by using an accelerated feed speed. Experiments have been conducted using a specific experimental apparatus in which the cathode tool is designed as a combined structure of two sectors and a thin sheet. By detecting the machining currents flowing through the minimum IEG, how the latter varies is obtained indirectly. The results indicate that using an accelerated feed speed is effective for controlling the IEG, thereby improving the roundness of the machined workpiece.
基金This work was supported by National Natural Science Foundation of China(U1908232)National Science and Technology Major Project(2017-VII-0002-0095)+2 种基金Graduate scientific research and innovation foundation of Chongqing(CYB20009)China Postdoctoral Science Foundation(2020M673126)Natural Science Foundation of Chongqing(cstc2020jcyj-bshX0128).
文摘This paper proposes a down-stroke abrasive belt grinding under micro feeding for noise reduction surface.Firstly,a physical model of processing under micro feeding for noise reduction structure was established.Based on the flexible contact characteristics of abrasive belt grinding and Hertz contact theory,a mathematical model suitable for this method was established,considering vibration and abrasive belt wear.Secondly,a simulation analysis was carried out.Then,an experimental platform was built to analyze the influence of process parameters on surface roughness and surface microstructure,with the model verified.Finally,the propeller with pit structure was simulated,and the noise reduction performance of the propeller under this method and general abrasive belt grinding was compared and analyzed.The results show that the maximum error of the model based on proposed method does not exceed 10%,and the coincidence degree of the minimum error point can reach 90%at lower feed speed and higher linear velocity of the abrasive belt.The noise reduction effect of the propeller with pit-shaped surfaces can reach 35%.Through the above analysis,the proposed method can be used for the processing of noise reduction surfaces.
基金The Public Science and Technology Research Funds Projects of Ocean under contract No.201505026the Fujian Province Natural Science Foundation under contract Nos 2016J01160 and 2017N0015the Scientific Research Foundation of Third Institute of Oceanography,SOA under contract No.2016038
文摘Agarases are hydrolytic enzymes that act on the hydrolysis of agar and have a broad range of applications in food,cosmetics and pharmaceutical industries. In this study, a glycerol feeding strategy based on induction mode optimization for high cell density and β-agarase production was established, which could effectively control acetate yield. First, exponential feeding strategy of glycerol with different overall specific growth rates（μ） was applied in the pre-induction phase. The results showed that the low μ（μ=0.2） was suggested to be the optimal for cell growth and β-agarase production. Second, the effects of induction temperature and the inducer concentration on cell growth and β-agarase production were investigated in the post-induction phase. When induced by isopropyl-β-d-thiogalactoside（IPTG）, the strategy of 0.8 mmol/L IPTG induction at 20℃ was found to be optimal for β-agarase production. When cultivation was induced by continuous lactose feeding strategy of 1.0 g/（L·h）, the β-agarase activity reached 112.5 U/mL, which represented the highest β-agarase production to date.Furthermore, the β-agarase was capable of degrading G. lemaneiformis powder directly to produce neoagarooligosaccharide, and the hydrolysates were neoagarotetraose（NA4） and neoagarohexaose（NA6）. The overall research may be useful for the industrial production and application of β-agarase.
文摘Friction stir processing （FSP）, a variation of FSW （friction stir welding） is an emerging surface engineering technology that can locally eliminate casting defects and refine microstructures, thereby improving the mechanical properties of material. FSP can also produce fine grained microstructures through the thickness to impart superplasticity. The technology involves plunging a rapidly rotating, non consumable tool, comprising a profiled pin and larger diameter shoulder, into the surface and then traversing the tool across the surface. The pin and the shoulder friction heat the surface which alters the grain structure in the processed area thereby improving the mechanical properties. This paper presents the effects of FSP on microstructure and mechanical properties of extruded cast 2285 aluminum alloy at three different feed rates viz. 10, 12 and 15 mm/min. With the increase in the feed speed the material was observed to have increased impact strength. FSP also increased the tensile and yield strengths with increases in hardness and ductility values also. The observation has been listed in detail and pictorially represented.
基金the Thailand Graduate Institute of Science and Technology(No. TGIST 01-47-038)the National Science and Technology Development Agency(NSTDA) for Ph.D.Scholarship to Mr. Chaiwat Waewsakthe National Research Council of Thailand for research grant under Fiscal Year 2008 Budget to King Mongkut’s University of Technology Thonburi
文摘Based on the developed neural-fuzzy control system for anaerobic hybrid reactor （AHR） in wastewater treatment and biogas production, the neural network with backpropagation algorithm for prediction of the variables pH, alkalinity （Alk） and total volatile acids （TVA） at present day time t was used as input data for the fuzzy logic to calculate the influent feed flow rate that was applied to control and monitor the process response at different operations in the initial, overload influent feeding and the recovery phases. In all three phases, this neural-fuzzy control system showed great potential to control AHR in high stability and performance and quick response. Although in the overloading operation phase II with two fold calculating influent flow rate together with a two fold organic loading rate （OLR）, this control system had rapid response and was sensitive to the intended overload. When the influent feeding rate was followed by the calculation of control system in the initial operation phase I and the recovery operation phase III, it was found that the neural-fuzzy control system application was capable of controlling the AHR in a good manner with the pH close to 7, TVA/Alk 〈 0.4 and COD removal 〉 80% with biogas and methane yields at 0.45 and 0.30 m^3/kg COD removed.
