一、作为哲学的AI for Process(一)郭为的哲学思想1.郭为是谁郭为是谁?他是一位哲学家。顺便说,他同时还领导着神州数码。为什么说郭为是哲学家呢?因为他在著作中谈到高深的哲学,如“数据如水,奔流不息,无界融合”。他引述古希腊哲学家...一、作为哲学的AI for Process(一)郭为的哲学思想1.郭为是谁郭为是谁?他是一位哲学家。顺便说,他同时还领导着神州数码。为什么说郭为是哲学家呢?因为他在著作中谈到高深的哲学,如“数据如水,奔流不息,无界融合”。他引述古希腊哲学家赫拉克利特所说的“万物流转”,又说“你不能两次踏进同一条河流,因为新的水不断地流过你的身旁”,他所表达的意思是“世界上唯一不变的就是变化”。展开更多
During extensive gully land consolidation projects on China's Loess Plateau,many loess-bedrock fill slopes were formed,which frequently experience shallow landslides induced by rainfall.However,studies on loess-be...During extensive gully land consolidation projects on China's Loess Plateau,many loess-bedrock fill slopes were formed,which frequently experience shallow landslides induced by rainfall.However,studies on loess-bedrock slope failure triggered by continuous heavy rainfall are limited,and the role of the soilerock interface between the original bedrock slope and fill slope in the hydrological and failure process of the slope remains unclear.In this study,we conducted a continuous rainfall model test on a loess-bedrock fill slope.During the test,the responses of volume water content,pore pressure,micro deformation,and movement of the infiltration front were observed.The hydrological process and failure mechanism were then analysed.The findings suggest that the soilerock interface is a predominant infiltration surface within the slope.Rainfall infiltration rates at the interface reach 1.24-2.80 times those of the fill slope,with peak interfacial pore water pressure exceeding that of the loess fill.Furthermore,the infiltration front moves rapidly along the interface toward the bottom of the slope,reducing interfacial cohesion between bedrock and loess.The slope failure modes are summarised into three phases:local failure→flow slide and crack penetration→multistage block retrogressive slides.The cracks generated at the slope surface serve as key determinants of the geometry and scale of shallow landslides.Therefore,we recommend targeted engineering interventions to mitigate the instability and erosion of loessebedrock fill slopes.展开更多
Granite residual soil slope is often destroyed,which poses great threats to Rong County in southeastern Guangxi,China.Heavy rainfall and fissures are the major triggering and internal factors.The fissure that controls...Granite residual soil slope is often destroyed,which poses great threats to Rong County in southeastern Guangxi,China.Heavy rainfall and fissures are the major triggering and internal factors.The fissure that controls the slope stability and the associated failure mechanisms remain unclear.The purpose of this study was to identify the controlling fissures through field investigation,elucidate the effect of its position,and analyze the failure process and hydrological response of residual soil slope through artificial flume model tests.The results comprised five aspects.(1)Surface weathering and unloading fissures could affect slope stability.(2)The failure processes with different fissure positions exhibited inconsistent characteristics.(3)The volume moisture content(VMC)had the most direct response at the fissure tip.The corresponding infiltration rate was the highest.The response time of pore water pressure(PWP)was longer than that of VMC.Fluctuations in PWP were associated with VMC and changes in the soil microstructure due to local deformation.(4)Slope failure was accompanied by serious soil erosion.This could be attributed to the infiltration direction and the interaction between soil and water.(5)Fissured soil slopes experienced five similar failure processes:sheet erosion and partial failure of the slope foot,occurrence of preferential flow and enlargement of the sliding area,creep deformation and tension fissure emergence,block sliding and gully erosion,and flow-slip.展开更多
This study seeks to establish a novel,semi-automatic system that utilizes Industry 4.0 principles to effectively determine both acceptable and rejectable concrete cubes with regard to their failure modes,significantly...This study seeks to establish a novel,semi-automatic system that utilizes Industry 4.0 principles to effectively determine both acceptable and rejectable concrete cubes with regard to their failure modes,significantly contributing to the dependability of concrete quality evaluations.The study utilizes image processing and machine learning(ML)methods,namely object detectionmodels such as YOLOv8 and Convolutional Neural Networks(CNNs),to evaluate images of concrete cubes.These models are trained and validated on an extensive database of annotated images from real-world and laboratory conditions.Preliminary results indicate a good performance in the classification of concrete cube failure modes.The proposed system accurately identifies cracks,determines the severity of damage to structures,indicating the potential to minimize human errors and discrepancies that might occur through the current techniques to detect the failure mode of concrete cubes.Thedeveloped systemcould significantly improve the reliability of concrete cube assessments,reduce resource wastage,and contribute to more sustainable construction practices.By minimizing material costs and errors,this innovation supports the construction industry’s move towards sustainability.展开更多
Microbially induced calcium carbonate precipitation(MICP)technology can induce calcium carbonate crystals with cementation and stable performance in the process of microbial metabolism or enzymization through the regu...Microbially induced calcium carbonate precipitation(MICP)technology can induce calcium carbonate crystals with cementation and stable performance in the process of microbial metabolism or enzymization through the regulation of environmental factors MICP can be used as a cementing agent to cement cohesionless sand particles to form the materials with the characteristics of higher strength,better durability and environmental friendli-ness,as well as a good engineering application prospect.In this paper,the shear strength of sand column was tested by triaxial compression tests,and the strength index was obtained.In order to further study the micro-strength mechanism and the failure process,based on the discrete element method,a numerical model of MICP cemented sand column was established considering the factors of matrix soil particle gradation,particle mor-phology,content ratio of induced calcium carbonate,pore distribution characteristics,inter-particle cementation and so on.The failure process of MICP cemented sand column under load was analysed by numerical simulation,and the reliability of the numerical model was tested by combining with the stress intensity curve of samples under test conditions.The results indicate that compared with the actual triaxial tests of MICP cemented sand column,although there are deviations in stress and strain,cohesion and internal friction angle,the numerical simulation shows similar development law and intensity amplitude,and the same failure trend.The work in this paper verifies the reliability of the numerical model and provides a theoretical basis for the subsequent analysis of the factors influencing the geotechnical mechanical properties of biomineralized materials.展开更多
Landslide dams,as frequent natural hazards,pose significant risks to human lives,property,and ecological environments.The grading characteristics and density of dam materials play a crucial role in determining the sta...Landslide dams,as frequent natural hazards,pose significant risks to human lives,property,and ecological environments.The grading characteristics and density of dam materials play a crucial role in determining the stability of landslide dams and the potential for dam breaches.To explore the failure mechanisms and evolutionary processes of landslide dams with varying soil properties,this study conducted a series of flume experiments,considering different grain compositions and material densities.The results demonstrated that grading characteristics significantly influence landslide dam stability,affecting failure patterns,breach processes,and final breach morphologies.Fine-graded materials exhibited a sequence of surface erosion,head-cut erosion,and subsequent surface erosion during the breach process,while well-graded materials typically experienced head-cut erosion followed by surface erosion.In coarse-graded dams,the high permeability of coarse particles allowed the dam to remain stable,as inflows matched outflows.The dam breach model experiments also showed that increasing material density effectively delayed the breach and reduced peak breach flow discharge.Furthermore,higher fine particle content led to a reduction in the residual dam height and the base slope of the final breach profile,although the relationship between peak breach discharge and the content of fine and coarse particles was nonlinear.To better understand breach morphology evolution under different soil characteristics and hydraulic conditions,three key points were identified—erosion point,control point,and scouring point.This study,by examining the evolution of failure patterns,breach processes,and breach flow discharges under various grading and density conditions,offers valuable insights into the mechanisms behind landslide dam failures.展开更多
Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim ...Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of significant,novel,and high-impact research in the fields of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.展开更多
We present an assumed enhanced strain finite element framework for the simulation of tensile fracturing processes in transversely isotropic rocks.Fractures along the weak bedding planes and through the anisotropic roc...We present an assumed enhanced strain finite element framework for the simulation of tensile fracturing processes in transversely isotropic rocks.Fractures along the weak bedding planes and through the anisotropic rock matrix are treated with distinct enrichment,and a recently proposed dualmechanism tensile failure criterion for transversely isotropic rocks is adopted to determine crack initiation for the two failure modes.The cohesive crack model is adopted to characterize the response of embedded cracks.As for the numerical implementation of the proposed framework,both algorithms for the update of local history variables at Gauss points and of the global finite element system are derived.Four boundary-value problem simulations are carried out with the proposed framework,including uniaxial tension tests of Argillite,pre-notched square loaded in tension,three-point bending tests on Longmaxi shale,and simulations of tensile cracks induced by a strip load around a tunnel in transversely isotropic rocks.Simulation results reveal that the proposed framework can properly capture the tensile strength anisotropy and the anisotropic evolution of tensile cracks in transversely isotropic rocks.展开更多
The in-flight heating process of cerium dioxide(CeO_(2))powders was investigated through experiments and numerical simulations.In the experiment,CeO_(2)powder(average size of 30μm)was injected into radio-frequency(RF...The in-flight heating process of cerium dioxide(CeO_(2))powders was investigated through experiments and numerical simulations.In the experiment,CeO_(2)powder(average size of 30μm)was injected into radio-frequency(RF)argon plasma,and the temperatures were measured using a DPV-2000 monitor.A model combining the electromagnetism,thermal flow,and heat transfer characteristics of powder during in-flight heating in argon plasma was proposed.The melting processes of CeO_(2)powders of different diameters,with and without thermal resistance effect,were investigated.Results show that the heating process of CeO_(2)powder particles consists of three main stages,one of which is relevant to a dimensionless parameter known as the Biot number.When the Biot value≥0.1,thermal resistance increases significantly,especially for the larger powders.The predicted temperature of the particles at the outlet(1800–2880 K)is in good agreement with the experimental result.展开更多
The hot compression deformation behavior of Mg-6Zn-1Mn-0.5Ca(ZM61-0.5Ca)and Mg-6Zn-1Mn-2Sn-0.5Ca(ZMT612-0.5Ca)alloys was investigated at deformation temperatures ranging from 250℃to 400℃and strain rates varying from...The hot compression deformation behavior of Mg-6Zn-1Mn-0.5Ca(ZM61-0.5Ca)and Mg-6Zn-1Mn-2Sn-0.5Ca(ZMT612-0.5Ca)alloys was investigated at deformation temperatures ranging from 250℃to 400℃and strain rates varying from 0.001 s^(-1) to 1 s^(-1).The results show that the addition of Sn promotes dynamic recrystallization(DRX),and CaMgSn phases can act as nucleation sites during the compression deformation.Flow stress increases with increasing the strain rate and decreasing the temperature.Both the ZM61-0.5Ca and ZMT612-0.5Ca alloys exhibit obvious DRX characteristics.CaMgSn phases can effectively inhibit dislocation motion with the addition of Sn,thus increasing the peak fl ow stress of the alloy.The addition of Sn increases the hot deformation activation energy of the ZM61-0.5Ca alloy from 199.654 kJ/mol to 276.649 kJ/mol,thus improving the thermal stability of the alloy.For the ZMT612-0.5Ca alloy,the optimal hot deformation parameters are determined to be a deformation temperature range of 350–400℃and a strain rate range of 0.001–0.01 s^(-1).展开更多
Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durabili...Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durability,and corrosion resistance.These metals have body-centered cubic crystal structure,characterized by limited slip systems and impeded dislocation motion,resulting in significant low-temperature brittleness,which poses challenges for the conventional processing.Additive manufacturing technique provides an innovative approach,enabling the production of intricate parts without molds,which significantly improves the efficiency of material usage.This review provides a comprehensive overview of the advancements in additive manufacturing techniques for the production of refractory metals,such as W,Ta,Mo,and Nb,particularly the laser powder bed fusion.In this review,the influence mechanisms of key process parameters(laser power,scan strategy,and powder characteristics)on the evolution of material microstructure,the formation of metallurgical defects,and mechanical properties were discussed.Generally,optimizing powder characteristics,such as sphericity,implementing substrate preheating,and formulating alloying strategies can significantly improve the densification and crack resistance of manufactured parts.Meanwhile,strictly controlling the oxygen impurity content and optimizing the energy density input are also the key factors to achieve the simultaneous improvement in strength and ductility of refractory metals.Although additive manufacturing technique provides an innovative solution for processing refractory metals,critical issues,such as residual stress control,microstructure and performance anisotropy,and process stability,still need to be addressed.This review not only provides a theoretical basis for the additive manufacturing of high-performance refractory metals,but also proposes forward-looking directions for their industrial application.展开更多
Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim ...Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.展开更多
Background Frailty is common and significantly impacts prognosis in heart failure(HF). The Vulnerable Elders Survey-13(VES-13), widely used in oncogeriatrics and public health, remains unexplored as a frailty screenin...Background Frailty is common and significantly impacts prognosis in heart failure(HF). The Vulnerable Elders Survey-13(VES-13), widely used in oncogeriatrics and public health, remains unexplored as a frailty screening tool in HF outpatients. In this study, we prospectively evaluated VES-13 against a multimodal screening assessment in detecting frailty and predicting individual risk of adverse prognosis.Methods Frailty was assessed at the initial visit using both a multimodal approach, incorporating Barthel Index, Older American Resources and Services scale, Pfeiffer Test, abbreviated Geriatric Depression Scale, age > 85 years, lacking support systems,and VES-13. Patients scoring ≥ 3 on VES-13 or meeting at least one multimodal criterion were classified as frail. Endpoints included all-cause mortality, a composite of death or HF hospitalization, and recurrent HF hospitalizations.Results A total of 301 patients were evaluated. VES-13 identified 40.2% as frail and the multimodal assessment 33.2%. In Cox regression analyses, frailty identified by VES-13 showed greater prognostic significance than the multimodal assessment for allcause mortality(HR = 3.70 [2.15–6.33], P < 0.001 vs. 2.40 [1.46–4.0], P = 0.001) and the composite endpoint(HR = 3.13 [2.02–4.84], P< 0.001 vs. 1.96 [1.28–2.99], P = 0.002). Recurrent HF hospitalizations were four times more frequent in VES-13 frail patients while two times in those identified as frail by the multimodal assessment. Additionally, stratifying patients by VES-13 tertiles provided robust risk differentiation.Conclusions VES-13, a simple frailty tool, outperformed a comprehensive multimodal assessment and could be easily integrated into routine HF care, highlighting its clinical utility in identifying patients at risk for poor outcomes.展开更多
Digital twin technology brings more opportunities and challenges to chemical engineering in both academic and industry.A complex process could have multiple digitalization needs,including simulation,monitoring,operato...Digital twin technology brings more opportunities and challenges to chemical engineering in both academic and industry.A complex process could have multiple digitalization needs,including simulation,monitoring,operator training,etc.;thus,a hierarchical digital twin would be a comprehensive solution to that.In this study,a novel and general framework of the digital twin is proposed for operations in process industry.With the hierarchical structure,the framework can handle various tasks driven by different roles in process industry,including managers,engineers,and operators.To complete these tasks,the framework consists of three modules:OAS(Operation Analysis System),OMS(Operation Monitoring System),and OTS(Operator Training System).Each module focuses on one unique type of demand from the staff,as well as interactions among them enabling efficient data sharing.Based on the hierarchical framework,a digital twin system is applied for one complex industrial nitration process,which successfully enhances the operation efficiency and safety in several industrial scenarios with different demands.展开更多
Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing addit...Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.展开更多
Processes supported by process-aware information systems are subject to continuous and often subtle changes due to evolving operational,organizational,or regulatory factors.These changes,referred to as incremental con...Processes supported by process-aware information systems are subject to continuous and often subtle changes due to evolving operational,organizational,or regulatory factors.These changes,referred to as incremental concept drift,gradually alter the behavior or structure of processes,making their detection and localization a challenging task.Traditional process mining techniques frequently assume process stationarity and are limited in their ability to detect such drift,particularly from a control-flow perspective.The objective of this research is to develop an interpretable and robust framework capable of detecting and localizing incremental concept drift in event logs,with a specific emphasis on the structural evolution of control-flow semantics in processes.We propose DriftXMiner,a control-flow-aware hybrid framework that combines statistical,machine learning,and process model analysis techniques.The approach comprises three key components:(1)Cumulative Drift Scanner that tracks directional statistical deviations to detect early drift signals;(2)a Temporal Clustering and Drift-Aware Forest Ensemble(DAFE)to capture distributional and classification-level changes in process behavior;and(3)Petri net-based process model reconstruction,which enables the precise localization of structural drift using transition deviation metrics and replay fitness scores.Experimental validation on the BPI Challenge 2017 event log demonstrates that DriftXMiner effectively identifies and localizes gradual and incremental process drift over time.The framework achieves a detection accuracy of 92.5%,a localization precision of 90.3%,and an F1-score of 0.91,outperforming competitive baselines such as CUSUM+Histograms and ADWIN+Alpha Miner.Visual analyses further confirm that identified drift points align with transitions in control-flow models and behavioral cluster structures.DriftXMiner offers a novel and interpretable solution for incremental concept drift detection and localization in dynamic,process-aware systems.By integrating statistical signal accumulation,temporal behavior profiling,and structural process mining,the framework enables finegrained drift explanation and supports adaptive process intelligence in evolving environments.Its modular architecture supports extension to streaming data and real-time monitoring contexts.展开更多
Formation control of multiple spacecraft has attracted extensive research attention.However,achieving reliable performance under sensor failures remains a significant challenge.This paper develops an integrated framew...Formation control of multiple spacecraft has attracted extensive research attention.However,achieving reliable performance under sensor failures remains a significant challenge.This paper develops an integrated framework that jointly designs distributed observers and local controllers to ensure robust formation control in the presence of external disturbances and sensor malfunctions.Treating the spacecraft formation as a single interconnected system,each spacecraft constructs a distributed observer that estimates the overall system state by incorporating both its own measurements and the predicted control information shared among the spacecraft.Based on the observer estimates,a local control law is synthesized to maintain the desired formation.Rigorous theoretical analysis and numerical simulations demonstrate that the proposed integrated approach effectively guarantees formation stability and resilience against sensor failures and disturbances.展开更多
The alcohol-based electrolyte exhibits excellent electropolishing properties for titanium alloys.However,its polishing effectiveness diminishes and the ability to polish is weakened or even lost after a certain durati...The alcohol-based electrolyte exhibits excellent electropolishing properties for titanium alloys.However,its polishing effectiveness diminishes and the ability to polish is weakened or even lost after a certain duration of electropolishing.Consequently,there is a low reuse rate for these electrolytes,significantly limiting their effi-ciency in electropolishing.In light of this issue,the current study conducted experiments using different elec-trochemical dissolution times on titanium alloy immersed in NaCl-ethylene glycol electrolytes to explore the main reasons for the failure of the electrolyte.Furthermore,a novel method was proposed to restore the elec-tropolishing ability of expired NaCl-ethylene glycol electrolyte.Subsequently,the titanium alloy was electro-polished with recycled alcohol-based electrolyte,and a favorable surface quality was obtained.By this method,the surface roughness Ra of the polished titanium alloy could be improved from Ra 0.498μm of the expired electrolyte to Ra 0.136μm of the recyclable electrolyte.展开更多
Objective:This integrative review aims to synthesize observational evidence on the prevalence,predictors,and psychosocial correlates of death anxiety in patients with hear t failure(HF).Methods:A comprehensive literat...Objective:This integrative review aims to synthesize observational evidence on the prevalence,predictors,and psychosocial correlates of death anxiety in patients with hear t failure(HF).Methods:A comprehensive literature search was conducted using 5 major databases:Scopus,Pub Med,Science Direct,Embase,and Pro Quest.Inclusion criteria were primary research studies published in English between January 2014 and March 2025 that quantitatively assessed death anxiety among patients with HF and explored its associations with demographic,clinical,or psychosocial variables.Results:A total of 12 eligible studies were identified and systematically reviewed,revealing that death anxiety is moderate to high among most samples.Key predictors of this anxiety included older age,feelings of loneliness,low socioeconomic status,and longer duration of HF.Additionally,several studies highlighted protective factors such as spiritual orientation,religious coping,and resilience.Interventions,including cognitive-behavioral therapy(CBT)and illness perception training,showed significant reductions in death anxiety.Conclusions:Death anxiety is a prevalent and impactful concern among Patients with HF,influenced by both individual and contextual factors.Routine assessment and integration of psychosocial and spiritual care—alongside evidence-based psychological interventions—are essential to address this critical aspect of HF management.展开更多
AIM:To investigate the underlying causes of surgical failure and reoperation management in patients with rhegmatogenous retinal detachment(RRD)who underwent scleral buckle surgery at our institution.METHODS:This was a...AIM:To investigate the underlying causes of surgical failure and reoperation management in patients with rhegmatogenous retinal detachment(RRD)who underwent scleral buckle surgery at our institution.METHODS:This was a single-center,retrospective,descriptive study.The clinical data of 368 patients(387 eyes)with RRD who underwent scleral buckling(SB)surgery between August 2013 and July 2023 at our institution were collected.The aim was to analyze the causes of recurrence and the rationale for selecting reoperation methods.RESULTS:Totally 368 patients(387 eyes)were included in the analysis,comprising 222 males and 146 females.The average age was 30.26±14.18 years,and the mean follow-up duration was(48.33±20.39)mo.The success rate of SB surgery was 90.2%.Recurrent retinal detachment occurred in 38 eyes.Based on surgical records,the causes of SB failure were analyzed.The recurrence causes included abnormal compression ridge position(position,height,or width)in 14 eyes(36.8%,14/38),hole omission in 11 eyes(29.0%,11/38),proliferative vitreoretinopathy(PVR)in 10 eyes(26.3%,10/38),and new holes in 3 eyes(7.9%,3/38).Among these,8 eyes(21.1%,8/38)underwent repeat SB surgery,while the remaining 30 eyes(78.9%,30/38)underwent pars plana vitrectomy(PPV).Regarding tamponade agents,silicone oil was used in 11 eyes(36.7%,11/30),C_(3)F_(8) gas in 12 eyes(40.0%,12/30),and sterile air in 7 eyes(23.3%,7/30).CONCLUSION:SB surgery demonstrates a high success rate in the treatment of RRD.However,abnormal compression ridge position,missed holes during surgery,and PVR are the primary causes of SB failure.After addressing the reasons for failure,re-SB surgery or PPV can be effective alternatives.展开更多
文摘一、作为哲学的AI for Process(一)郭为的哲学思想1.郭为是谁郭为是谁?他是一位哲学家。顺便说,他同时还领导着神州数码。为什么说郭为是哲学家呢?因为他在著作中谈到高深的哲学,如“数据如水,奔流不息,无界融合”。他引述古希腊哲学家赫拉克利特所说的“万物流转”,又说“你不能两次踏进同一条河流,因为新的水不断地流过你的身旁”,他所表达的意思是“世界上唯一不变的就是变化”。
基金supported by the National Key R&D Program of China(Grant No.2023YFC3008404)the National Key Research and Development Program,China(Grant No.2017YFD0800501)the National Natural Science Foundation of China(No.41790443).
文摘During extensive gully land consolidation projects on China's Loess Plateau,many loess-bedrock fill slopes were formed,which frequently experience shallow landslides induced by rainfall.However,studies on loess-bedrock slope failure triggered by continuous heavy rainfall are limited,and the role of the soilerock interface between the original bedrock slope and fill slope in the hydrological and failure process of the slope remains unclear.In this study,we conducted a continuous rainfall model test on a loess-bedrock fill slope.During the test,the responses of volume water content,pore pressure,micro deformation,and movement of the infiltration front were observed.The hydrological process and failure mechanism were then analysed.The findings suggest that the soilerock interface is a predominant infiltration surface within the slope.Rainfall infiltration rates at the interface reach 1.24-2.80 times those of the fill slope,with peak interfacial pore water pressure exceeding that of the loess fill.Furthermore,the infiltration front moves rapidly along the interface toward the bottom of the slope,reducing interfacial cohesion between bedrock and loess.The slope failure modes are summarised into three phases:local failure→flow slide and crack penetration→multistage block retrogressive slides.The cracks generated at the slope surface serve as key determinants of the geometry and scale of shallow landslides.Therefore,we recommend targeted engineering interventions to mitigate the instability and erosion of loessebedrock fill slopes.
基金financially supported by the National Natural Science Foundation of China(No.41901132)the Natural Scientific Project of Guangxi Zhuang Autonomous Region(Nos.2019GXNSFAA185015,2021GXNSFBA220025)+1 种基金the Interdisciplinary Scientific Research Foundation of Guangxi University(No.2022JCC026)the Project of Key Laboratory of Early Rapid Identification,Prevention and Control of Geological Diseases in Traffic Corridor of High Intensity Earthquake Mountainous Area of Yunnan Province(No.KLGDTC-2021-01)。
文摘Granite residual soil slope is often destroyed,which poses great threats to Rong County in southeastern Guangxi,China.Heavy rainfall and fissures are the major triggering and internal factors.The fissure that controls the slope stability and the associated failure mechanisms remain unclear.The purpose of this study was to identify the controlling fissures through field investigation,elucidate the effect of its position,and analyze the failure process and hydrological response of residual soil slope through artificial flume model tests.The results comprised five aspects.(1)Surface weathering and unloading fissures could affect slope stability.(2)The failure processes with different fissure positions exhibited inconsistent characteristics.(3)The volume moisture content(VMC)had the most direct response at the fissure tip.The corresponding infiltration rate was the highest.The response time of pore water pressure(PWP)was longer than that of VMC.Fluctuations in PWP were associated with VMC and changes in the soil microstructure due to local deformation.(4)Slope failure was accompanied by serious soil erosion.This could be attributed to the infiltration direction and the interaction between soil and water.(5)Fissured soil slopes experienced five similar failure processes:sheet erosion and partial failure of the slope foot,occurrence of preferential flow and enlargement of the sliding area,creep deformation and tension fissure emergence,block sliding and gully erosion,and flow-slip.
文摘This study seeks to establish a novel,semi-automatic system that utilizes Industry 4.0 principles to effectively determine both acceptable and rejectable concrete cubes with regard to their failure modes,significantly contributing to the dependability of concrete quality evaluations.The study utilizes image processing and machine learning(ML)methods,namely object detectionmodels such as YOLOv8 and Convolutional Neural Networks(CNNs),to evaluate images of concrete cubes.These models are trained and validated on an extensive database of annotated images from real-world and laboratory conditions.Preliminary results indicate a good performance in the classification of concrete cube failure modes.The proposed system accurately identifies cracks,determines the severity of damage to structures,indicating the potential to minimize human errors and discrepancies that might occur through the current techniques to detect the failure mode of concrete cubes.Thedeveloped systemcould significantly improve the reliability of concrete cube assessments,reduce resource wastage,and contribute to more sustainable construction practices.By minimizing material costs and errors,this innovation supports the construction industry’s move towards sustainability.
基金sponsored by the National Natural Science Foundation of China(Grant No.12002173,12262027)Research start-up project of Inner Mongolia University of Technology(No.2200000924)key Lab.of University of Geological Hazards and Geotechnical Engineering Defense in Sandy and Drought Regions,Inner Mongolia Autonomous.
文摘Microbially induced calcium carbonate precipitation(MICP)technology can induce calcium carbonate crystals with cementation and stable performance in the process of microbial metabolism or enzymization through the regulation of environmental factors MICP can be used as a cementing agent to cement cohesionless sand particles to form the materials with the characteristics of higher strength,better durability and environmental friendli-ness,as well as a good engineering application prospect.In this paper,the shear strength of sand column was tested by triaxial compression tests,and the strength index was obtained.In order to further study the micro-strength mechanism and the failure process,based on the discrete element method,a numerical model of MICP cemented sand column was established considering the factors of matrix soil particle gradation,particle mor-phology,content ratio of induced calcium carbonate,pore distribution characteristics,inter-particle cementation and so on.The failure process of MICP cemented sand column under load was analysed by numerical simulation,and the reliability of the numerical model was tested by combining with the stress intensity curve of samples under test conditions.The results indicate that compared with the actual triaxial tests of MICP cemented sand column,although there are deviations in stress and strain,cohesion and internal friction angle,the numerical simulation shows similar development law and intensity amplitude,and the same failure trend.The work in this paper verifies the reliability of the numerical model and provides a theoretical basis for the subsequent analysis of the factors influencing the geotechnical mechanical properties of biomineralized materials.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.U22A20602,U2040221,and 42207228)the Sichuan Science and Technology Program(2022NSFSC1060)the Fundamental Research Funds for Central Public Research Institutes(Grant No.Y324006)。
文摘Landslide dams,as frequent natural hazards,pose significant risks to human lives,property,and ecological environments.The grading characteristics and density of dam materials play a crucial role in determining the stability of landslide dams and the potential for dam breaches.To explore the failure mechanisms and evolutionary processes of landslide dams with varying soil properties,this study conducted a series of flume experiments,considering different grain compositions and material densities.The results demonstrated that grading characteristics significantly influence landslide dam stability,affecting failure patterns,breach processes,and final breach morphologies.Fine-graded materials exhibited a sequence of surface erosion,head-cut erosion,and subsequent surface erosion during the breach process,while well-graded materials typically experienced head-cut erosion followed by surface erosion.In coarse-graded dams,the high permeability of coarse particles allowed the dam to remain stable,as inflows matched outflows.The dam breach model experiments also showed that increasing material density effectively delayed the breach and reduced peak breach flow discharge.Furthermore,higher fine particle content led to a reduction in the residual dam height and the base slope of the final breach profile,although the relationship between peak breach discharge and the content of fine and coarse particles was nonlinear.To better understand breach morphology evolution under different soil characteristics and hydraulic conditions,three key points were identified—erosion point,control point,and scouring point.This study,by examining the evolution of failure patterns,breach processes,and breach flow discharges under various grading and density conditions,offers valuable insights into the mechanisms behind landslide dam failures.
文摘Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of significant,novel,and high-impact research in the fields of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.
基金supported by the National Natural Science Foundation of China(Grant Nos.52038005 and 52201326)the fellowship of China Postdoctoral Science Foundation(Grant No.2022M721883)Tsinghua University Initiative Scientific Research Program.
文摘We present an assumed enhanced strain finite element framework for the simulation of tensile fracturing processes in transversely isotropic rocks.Fractures along the weak bedding planes and through the anisotropic rock matrix are treated with distinct enrichment,and a recently proposed dualmechanism tensile failure criterion for transversely isotropic rocks is adopted to determine crack initiation for the two failure modes.The cohesive crack model is adopted to characterize the response of embedded cracks.As for the numerical implementation of the proposed framework,both algorithms for the update of local history variables at Gauss points and of the global finite element system are derived.Four boundary-value problem simulations are carried out with the proposed framework,including uniaxial tension tests of Argillite,pre-notched square loaded in tension,three-point bending tests on Longmaxi shale,and simulations of tensile cracks induced by a strip load around a tunnel in transversely isotropic rocks.Simulation results reveal that the proposed framework can properly capture the tensile strength anisotropy and the anisotropic evolution of tensile cracks in transversely isotropic rocks.
基金National Natural Science Foundation of China(11875039)Shanxi Scholarship Council of China(2023-033)+2 种基金Fundamental Research Program of Shanxi Province(202303021221071)China Baowu Low Carbon Metallurgical Innovation Foundation(2022)2023 Anhui Major Industrial Innovation Plan Project。
文摘The in-flight heating process of cerium dioxide(CeO_(2))powders was investigated through experiments and numerical simulations.In the experiment,CeO_(2)powder(average size of 30μm)was injected into radio-frequency(RF)argon plasma,and the temperatures were measured using a DPV-2000 monitor.A model combining the electromagnetism,thermal flow,and heat transfer characteristics of powder during in-flight heating in argon plasma was proposed.The melting processes of CeO_(2)powders of different diameters,with and without thermal resistance effect,were investigated.Results show that the heating process of CeO_(2)powder particles consists of three main stages,one of which is relevant to a dimensionless parameter known as the Biot number.When the Biot value≥0.1,thermal resistance increases significantly,especially for the larger powders.The predicted temperature of the particles at the outlet(1800–2880 K)is in good agreement with the experimental result.
基金Sichuan Science and Technology Program(2025ZNSFSC1341)Fundamental Research Funds for the Central Universities(J2022-090,25CAFUC04087)。
文摘The hot compression deformation behavior of Mg-6Zn-1Mn-0.5Ca(ZM61-0.5Ca)and Mg-6Zn-1Mn-2Sn-0.5Ca(ZMT612-0.5Ca)alloys was investigated at deformation temperatures ranging from 250℃to 400℃and strain rates varying from 0.001 s^(-1) to 1 s^(-1).The results show that the addition of Sn promotes dynamic recrystallization(DRX),and CaMgSn phases can act as nucleation sites during the compression deformation.Flow stress increases with increasing the strain rate and decreasing the temperature.Both the ZM61-0.5Ca and ZMT612-0.5Ca alloys exhibit obvious DRX characteristics.CaMgSn phases can effectively inhibit dislocation motion with the addition of Sn,thus increasing the peak fl ow stress of the alloy.The addition of Sn increases the hot deformation activation energy of the ZM61-0.5Ca alloy from 199.654 kJ/mol to 276.649 kJ/mol,thus improving the thermal stability of the alloy.For the ZMT612-0.5Ca alloy,the optimal hot deformation parameters are determined to be a deformation temperature range of 350–400℃and a strain rate range of 0.001–0.01 s^(-1).
基金National MCF Energy R&D Program(2024YFE03260300)。
文摘Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durability,and corrosion resistance.These metals have body-centered cubic crystal structure,characterized by limited slip systems and impeded dislocation motion,resulting in significant low-temperature brittleness,which poses challenges for the conventional processing.Additive manufacturing technique provides an innovative approach,enabling the production of intricate parts without molds,which significantly improves the efficiency of material usage.This review provides a comprehensive overview of the advancements in additive manufacturing techniques for the production of refractory metals,such as W,Ta,Mo,and Nb,particularly the laser powder bed fusion.In this review,the influence mechanisms of key process parameters(laser power,scan strategy,and powder characteristics)on the evolution of material microstructure,the formation of metallurgical defects,and mechanical properties were discussed.Generally,optimizing powder characteristics,such as sphericity,implementing substrate preheating,and formulating alloying strategies can significantly improve the densification and crack resistance of manufactured parts.Meanwhile,strictly controlling the oxygen impurity content and optimizing the energy density input are also the key factors to achieve the simultaneous improvement in strength and ductility of refractory metals.Although additive manufacturing technique provides an innovative solution for processing refractory metals,critical issues,such as residual stress control,microstructure and performance anisotropy,and process stability,still need to be addressed.This review not only provides a theoretical basis for the additive manufacturing of high-performance refractory metals,but also proposes forward-looking directions for their industrial application.
文摘Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.
文摘Background Frailty is common and significantly impacts prognosis in heart failure(HF). The Vulnerable Elders Survey-13(VES-13), widely used in oncogeriatrics and public health, remains unexplored as a frailty screening tool in HF outpatients. In this study, we prospectively evaluated VES-13 against a multimodal screening assessment in detecting frailty and predicting individual risk of adverse prognosis.Methods Frailty was assessed at the initial visit using both a multimodal approach, incorporating Barthel Index, Older American Resources and Services scale, Pfeiffer Test, abbreviated Geriatric Depression Scale, age > 85 years, lacking support systems,and VES-13. Patients scoring ≥ 3 on VES-13 or meeting at least one multimodal criterion were classified as frail. Endpoints included all-cause mortality, a composite of death or HF hospitalization, and recurrent HF hospitalizations.Results A total of 301 patients were evaluated. VES-13 identified 40.2% as frail and the multimodal assessment 33.2%. In Cox regression analyses, frailty identified by VES-13 showed greater prognostic significance than the multimodal assessment for allcause mortality(HR = 3.70 [2.15–6.33], P < 0.001 vs. 2.40 [1.46–4.0], P = 0.001) and the composite endpoint(HR = 3.13 [2.02–4.84], P< 0.001 vs. 1.96 [1.28–2.99], P = 0.002). Recurrent HF hospitalizations were four times more frequent in VES-13 frail patients while two times in those identified as frail by the multimodal assessment. Additionally, stratifying patients by VES-13 tertiles provided robust risk differentiation.Conclusions VES-13, a simple frailty tool, outperformed a comprehensive multimodal assessment and could be easily integrated into routine HF care, highlighting its clinical utility in identifying patients at risk for poor outcomes.
基金support of the“Pioneer”and“Leading Goose”Research&Development Program of Zhejiang(2024C01028)the State Key Laboratory of Industrial Control Technology,China(ICT2024C04)are gratefully acknowledged.
文摘Digital twin technology brings more opportunities and challenges to chemical engineering in both academic and industry.A complex process could have multiple digitalization needs,including simulation,monitoring,operator training,etc.;thus,a hierarchical digital twin would be a comprehensive solution to that.In this study,a novel and general framework of the digital twin is proposed for operations in process industry.With the hierarchical structure,the framework can handle various tasks driven by different roles in process industry,including managers,engineers,and operators.To complete these tasks,the framework consists of three modules:OAS(Operation Analysis System),OMS(Operation Monitoring System),and OTS(Operator Training System).Each module focuses on one unique type of demand from the staff,as well as interactions among them enabling efficient data sharing.Based on the hierarchical framework,a digital twin system is applied for one complex industrial nitration process,which successfully enhances the operation efficiency and safety in several industrial scenarios with different demands.
基金National Key Research and Development Program of China(2022YFB4600902)Shandong Provincial Science Foundation for Outstanding Young Scholars(ZR2024YQ020)。
文摘Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.
文摘Processes supported by process-aware information systems are subject to continuous and often subtle changes due to evolving operational,organizational,or regulatory factors.These changes,referred to as incremental concept drift,gradually alter the behavior or structure of processes,making their detection and localization a challenging task.Traditional process mining techniques frequently assume process stationarity and are limited in their ability to detect such drift,particularly from a control-flow perspective.The objective of this research is to develop an interpretable and robust framework capable of detecting and localizing incremental concept drift in event logs,with a specific emphasis on the structural evolution of control-flow semantics in processes.We propose DriftXMiner,a control-flow-aware hybrid framework that combines statistical,machine learning,and process model analysis techniques.The approach comprises three key components:(1)Cumulative Drift Scanner that tracks directional statistical deviations to detect early drift signals;(2)a Temporal Clustering and Drift-Aware Forest Ensemble(DAFE)to capture distributional and classification-level changes in process behavior;and(3)Petri net-based process model reconstruction,which enables the precise localization of structural drift using transition deviation metrics and replay fitness scores.Experimental validation on the BPI Challenge 2017 event log demonstrates that DriftXMiner effectively identifies and localizes gradual and incremental process drift over time.The framework achieves a detection accuracy of 92.5%,a localization precision of 90.3%,and an F1-score of 0.91,outperforming competitive baselines such as CUSUM+Histograms and ADWIN+Alpha Miner.Visual analyses further confirm that identified drift points align with transitions in control-flow models and behavioral cluster structures.DriftXMiner offers a novel and interpretable solution for incremental concept drift detection and localization in dynamic,process-aware systems.By integrating statistical signal accumulation,temporal behavior profiling,and structural process mining,the framework enables finegrained drift explanation and supports adaptive process intelligence in evolving environments.Its modular architecture supports extension to streaming data and real-time monitoring contexts.
基金supported by the National Natural Science Foundation of China(62088101,62522307,62273045,U2341213)Beijing Nova Program(20230484481)。
文摘Formation control of multiple spacecraft has attracted extensive research attention.However,achieving reliable performance under sensor failures remains a significant challenge.This paper develops an integrated framework that jointly designs distributed observers and local controllers to ensure robust formation control in the presence of external disturbances and sensor malfunctions.Treating the spacecraft formation as a single interconnected system,each spacecraft constructs a distributed observer that estimates the overall system state by incorporating both its own measurements and the predicted control information shared among the spacecraft.Based on the observer estimates,a local control law is synthesized to maintain the desired formation.Rigorous theoretical analysis and numerical simulations demonstrate that the proposed integrated approach effectively guarantees formation stability and resilience against sensor failures and disturbances.
基金supported by the National Natural Science Foundation of China(No.52175414)Natural Science Foundation of Jiangsu Province of China(No.BK20220134)Fundamental Research Funds for the Central Universities(No.NE2023002).
文摘The alcohol-based electrolyte exhibits excellent electropolishing properties for titanium alloys.However,its polishing effectiveness diminishes and the ability to polish is weakened or even lost after a certain duration of electropolishing.Consequently,there is a low reuse rate for these electrolytes,significantly limiting their effi-ciency in electropolishing.In light of this issue,the current study conducted experiments using different elec-trochemical dissolution times on titanium alloy immersed in NaCl-ethylene glycol electrolytes to explore the main reasons for the failure of the electrolyte.Furthermore,a novel method was proposed to restore the elec-tropolishing ability of expired NaCl-ethylene glycol electrolyte.Subsequently,the titanium alloy was electro-polished with recycled alcohol-based electrolyte,and a favorable surface quality was obtained.By this method,the surface roughness Ra of the polished titanium alloy could be improved from Ra 0.498μm of the expired electrolyte to Ra 0.136μm of the recyclable electrolyte.
文摘Objective:This integrative review aims to synthesize observational evidence on the prevalence,predictors,and psychosocial correlates of death anxiety in patients with hear t failure(HF).Methods:A comprehensive literature search was conducted using 5 major databases:Scopus,Pub Med,Science Direct,Embase,and Pro Quest.Inclusion criteria were primary research studies published in English between January 2014 and March 2025 that quantitatively assessed death anxiety among patients with HF and explored its associations with demographic,clinical,or psychosocial variables.Results:A total of 12 eligible studies were identified and systematically reviewed,revealing that death anxiety is moderate to high among most samples.Key predictors of this anxiety included older age,feelings of loneliness,low socioeconomic status,and longer duration of HF.Additionally,several studies highlighted protective factors such as spiritual orientation,religious coping,and resilience.Interventions,including cognitive-behavioral therapy(CBT)and illness perception training,showed significant reductions in death anxiety.Conclusions:Death anxiety is a prevalent and impactful concern among Patients with HF,influenced by both individual and contextual factors.Routine assessment and integration of psychosocial and spiritual care—alongside evidence-based psychological interventions—are essential to address this critical aspect of HF management.
文摘AIM:To investigate the underlying causes of surgical failure and reoperation management in patients with rhegmatogenous retinal detachment(RRD)who underwent scleral buckle surgery at our institution.METHODS:This was a single-center,retrospective,descriptive study.The clinical data of 368 patients(387 eyes)with RRD who underwent scleral buckling(SB)surgery between August 2013 and July 2023 at our institution were collected.The aim was to analyze the causes of recurrence and the rationale for selecting reoperation methods.RESULTS:Totally 368 patients(387 eyes)were included in the analysis,comprising 222 males and 146 females.The average age was 30.26±14.18 years,and the mean follow-up duration was(48.33±20.39)mo.The success rate of SB surgery was 90.2%.Recurrent retinal detachment occurred in 38 eyes.Based on surgical records,the causes of SB failure were analyzed.The recurrence causes included abnormal compression ridge position(position,height,or width)in 14 eyes(36.8%,14/38),hole omission in 11 eyes(29.0%,11/38),proliferative vitreoretinopathy(PVR)in 10 eyes(26.3%,10/38),and new holes in 3 eyes(7.9%,3/38).Among these,8 eyes(21.1%,8/38)underwent repeat SB surgery,while the remaining 30 eyes(78.9%,30/38)underwent pars plana vitrectomy(PPV).Regarding tamponade agents,silicone oil was used in 11 eyes(36.7%,11/30),C_(3)F_(8) gas in 12 eyes(40.0%,12/30),and sterile air in 7 eyes(23.3%,7/30).CONCLUSION:SB surgery demonstrates a high success rate in the treatment of RRD.However,abnormal compression ridge position,missed holes during surgery,and PVR are the primary causes of SB failure.After addressing the reasons for failure,re-SB surgery or PPV can be effective alternatives.
