Zeolites are crystalline microporous materials widely used in catalysis,adsorption,and ion exchange owing to their tunable pore structures and acid centers[1].Traditional zeolites,however,often suffer from limitations...Zeolites are crystalline microporous materials widely used in catalysis,adsorption,and ion exchange owing to their tunable pore structures and acid centers[1].Traditional zeolites,however,often suffer from limitations such as restricted molecular diffusion and rapid coking,which hinder their efficiency in processing large molecules.展开更多
In the late 1970s, the discovery of the alumindnophosphate molecular sieveminerals which have been called a new generation led to framework composition oxideoutside of the aluminium-silicon system. The largest seconda...In the late 1970s, the discovery of the alumindnophosphate molecular sieveminerals which have been called a new generation led to framework composition oxideoutside of the aluminium-silicon system. The largest secondary building unit (SBU)of 18 T-atom rings has been maintained more than 180 years[2]. Only just in 1988,the molecular sieve with eighteen membered-ringr was reported by Davis and calledVIP-5 after the Virginia Polytechnic Institute. But a dissent has been expressed byDuncan for this. It was considered that VPI-5 does not represent a展开更多
THE mechanical response and deformation mechanisms of pure nickel under nanoindentation were systematically investigated using molecular dynamics(MD)simulations,with a particular focus on the novel interplay between c...THE mechanical response and deformation mechanisms of pure nickel under nanoindentation were systematically investigated using molecular dynamics(MD)simulations,with a particular focus on the novel interplay between crystallographic orientation,grain boundary(GB)proximity,and pore characteristics(size/location).This study compares single-crystal nickel models along[100],[110],and[111]orientations with equiaxed polycrystalline models containing 0,1,and 2.5 nm pores in surface and subsurface configurations.Our results reveal that crystallographic anisotropy manifests as a 24.4%higher elastic modulus and 22.2%greater hardness in[111]-oriented single crystals compared to[100].Pore-GB synergistic effects are found to dominate the deformation behavior:2.5 nm subsurface pores reduce hardness by 25.2%through stress concentration and dislocation annihilation at GBs,whereas surface pores enable mechanical recovery via accelerated dislocation generation post-collapse.Additionally,size-dependent deformation regimes were identified,with 1 nm pores inducing negligible perturbation due to rapid atomic rearrangement,in contrast with persistent softening in 2.5 nm pores.These findings establish atomic-scale design principles for defect engineering in nickel-based aerospace components,demonstrating how crystallographic orientation,pore configuration,and GB interactions collectively govern nanoindentation behavior.展开更多
To enhance the electrochemical performance of lithium-ion battery anodes with higher silicon content,it is essential to engineer their microstructure for better lithium-ion transport and mitigated volume change as wel...To enhance the electrochemical performance of lithium-ion battery anodes with higher silicon content,it is essential to engineer their microstructure for better lithium-ion transport and mitigated volume change as well.Herein,we suggest an effective approach to control the micropore structure of silicon oxide(SiO_(x))/artificial graphite(AG)composite electrodes using a perforated current collector.The electrode features a unique pore structure,where alternating high-porosity domains and low-porosity domains markedly reduce overall electrode resistance,leading to a 20%improvement in rate capability at a 5C-rate discharge condition.Using microstructure-resolved modeling and simulations,we demonstrate that the patterned micropore structure enhances lithium-ion transport,mitigating the electrolyte concentration gradient of lithium-ion.Additionally,perforating current collector with a chemical etching process increases the number of hydrogen bonding sites and enlarges the interface with the SiO_(x)/AG composite electrode,significantly improving adhesion strength.This,in turn,suppresses mechanical degradation and leads to a 50%higher capacity retention.Thus,regularly arranged micropore structure enabled by the perforated current collector successfully improves both rate capability and cycle life in SiO_(x)/AG composite electrodes,providing valuable insights into electrode engineering.展开更多
Grain size traits, including grain length, grain width and grain thickness, are controlled by quantitative trait loci （QTLs）. Many QTLs relating to rice grain size traits had been reported, but their control mechani...Grain size traits, including grain length, grain width and grain thickness, are controlled by quantitative trait loci （QTLs）. Many QTLs relating to rice grain size traits had been reported, but their control mechanisms have not yet been elucidated. A recombinant inbred line （RIL） population of 240 lines, deriving from a cross between TD70, an extra-large grain size japonica line with 80 g of 1000-grain weight, and Kasalath, a small grain size indica variety, were constructed and used to map grain size QTLs to a linkage map by using 141 SSR markers in 2010 and 2011. Five QTLs for grain length, six for grain width and seven for grain thickness were detected distributing over chromosomes 2, 3, 5, 7, 9 and 12. Seven QTLs, namely qGL3.1, qGW2, qGW2.2, qGW5.1, qGW5.2, qGT2.3 and qGT3.1, were detected in either of the two years and explained for 56.19%, 4.42%, 29.41%, 10.37%, 7.61%, 21.19% and 17.06% of the observed phenotypic variances on average, respectively. The marker interval RM1347-RM5699 on chromosome 2 was found common for grain length, grain width and grain thickness; qGL3.1 and qGT3.1 were mapped to the same interval RM6080-RM6832 on chromosome 3. All 18 QTL alleles were derived from the large grain parent TD70. Most of the QTLs mapped in the present study were found the same as the genes previously cloned （GW2, GS3 or qGL3, GW5 and GS5）, and several were the same as the QTLs （GS7 and qGL-7） previously mapped. Three QTLs, qGL2.2 on chromosome 2, qGW9 and qGT9 on chromosome 9, were first detected. These results laid a foundation for further fine mapping or cloning of these QTLs.展开更多
In solid backfill mining without gangue removal, the gangue is separated directly underground and backfilled into goaf. This necessitates the underground construction of an extra-large section chamber for separation e...In solid backfill mining without gangue removal, the gangue is separated directly underground and backfilled into goaf. This necessitates the underground construction of an extra-large section chamber for separation equipments. For the construction of an extra-large section chamber in the Tangshan mine, we proposed an active support through a combination of bolting, anchor cables, lining, and a reinforced chamber floor by inverted arch pouring. ABAQUS software was used to analyze the surrounding rock deformation and the plastic zone development of the chamber under different excavation schemes.The best excavation scheme was determined, and the effectiveness of the combined supports was verified. In practice, the engineering installation showed good overall control of the movement of the surrounding rock, with roof-to-floor and side-to-side convergences of 154.6 and 77.5 mm, respectively,which meets the requirements for underground coal gangue separation.展开更多
1Project objective Extra-large shield tunnels have become the best choice for urban transportation tunnels due to the advantage of taking the best use of underground space.Hengqin Island in Zhuhai is a demonstration a...1Project objective Extra-large shield tunnels have become the best choice for urban transportation tunnels due to the advantage of taking the best use of underground space.Hengqin Island in Zhuhai is a demonstration area to explore a new cooperation mode among Guangzhou,Hong Kong and Macao,which is also an important pivot of the 21st Century Maritime Silk Road.Thus,it takes an important role in serving Hong Kong and Macao and driving the economic development of the Pearl River Delta.However,as typhoons are frequent in Zhuhai,Hengqin Island will be isolated to the mainland when bridges are obstructed in typhoon seasons.Therefore,the bridges cannot satisfy the traffic demand to the island.The inconvenient transportation has a neglect influence on production and live of people on the island,which also affects the long term development of Hengqin Island.Apart from the two existed bridges,Maliuzhou Traffic Tunnel in Zhuhai is the third major link of Hengqin Island to the mainland,which will put an end to the"losing connectionM problem due to obstructing the bridges in typhoon seasons.This linkage is able to promote Zhuhai tourism exploitation and the long term development of the city,and also increase the security of peopled lives.Meanwhile,the construction of the Maliuzhou Traffic Tunnel has conquered the challenges in designing and building of the extra-large shield tunnel in composite ground and undersea circumstances.The designing methods and constructing approaches used in this project will provide theoretical supports and technical guarantees to similar projects.展开更多
The extra-large scale multiple-input multiple-output(XL-MIMO)for the beyond fifth/sixth generation mobile communications is a promising technology to provide Tbps data transmission and stable access service.However,th...The extra-large scale multiple-input multiple-output(XL-MIMO)for the beyond fifth/sixth generation mobile communications is a promising technology to provide Tbps data transmission and stable access service.However,the extremely large antenna array aperture arouses the channel near-field effect,resulting in the deteriorated data rate and other challenges in the practice communication systems.Meanwhile,multi-panel MIMO technology has attracted extensive attention due to its flexible configuration,low hardware cost,and wider coverage.By combining the XL-MIMO and multi-panel array structure,we construct multi-panel XL-MIMO and apply it to massive Internet of Things(IoT)access.First,we model the multi-panel XL-MIMO-based near-field channels for massive IoT access scenarios,where the electromagnetic waves corresponding to different panels have different angles of arrival/departure(AoAs/AoDs).Then,by exploiting the sparsity of the near-field massive IoT access channels,we formulate a compressed sensing based joint active user detection(AUD)and channel estimation(CE)problem which is solved by AMP-EM-MMV algorithm.The simulation results exhibit the superiority of the AMP-EM-MMV based joint AUD and CE scheme over the baseline algorithms.展开更多
The current High-Speed Railway(HSR)communications increasingly fail to satisfy the massive access services of numerous user equipment brought by the increasing number of people traveling by HSRs.To this end,this paper...The current High-Speed Railway(HSR)communications increasingly fail to satisfy the massive access services of numerous user equipment brought by the increasing number of people traveling by HSRs.To this end,this paper investigates millimeter-Wave(mmWave)extra-large scale(XL)-MIMO-based massive Internet-of-Things(loT)access in near-field HSR communications,and proposes a block simultaneous orthogonal matching pursuit(B-SOMP)-based Active User Detection(AUD)and Channel Estimation(CE)scheme by exploiting the spatial block sparsity of the XLMIMO-based massive access channels.Specifically,we first model the uplink mmWave XL-MIMO channels,which exhibit the near-field propagation characteristics of electromagnetic signals and the spatial non-stationarity of mmWave XL-MIMO arrays.By exploiting the spatial block sparsity and common frequency-domain sparsity pattern of massive access channels,the joint AUD and CE problem can be then formulated as a Multiple Measurement Vectors Compressive Sensing(MIMV-CS)problem.Based on the designed sensing matrix,a B-SOMP algorithm is proposed to achieve joint AUD and CE.Finally,simulation results show that the proposed solution can obtain a better AUD and CE performance than the conventional CS-based scheme for massive IoT access in near-field HSR communications.展开更多
An extra-large landslide occurred on June 19,2021,on the footwall slope of the Nanfen Open-pit Iron Mine in Liaoning Province,China,with a volume of approximately 1.2×107 m3.To elucidate the causative factors,dev...An extra-large landslide occurred on June 19,2021,on the footwall slope of the Nanfen Open-pit Iron Mine in Liaoning Province,China,with a volume of approximately 1.2×107 m3.To elucidate the causative factors,development process,and destructive mechanisms of this catastrophic landslide,comprehensive field tests,investigations,and laboratory experiments were conducted.Initially,the heavily weathered rock mass of the slope was intersected by faults and joint fissures,facilitating rainwater infiltration.Moreover,the landslide contained a substantial clay mineral with highly developed micro-cracks and micro-pores,exhibiting strong water-absorption properties.As moisture content increased,the rock mass underwent softening,resulting in reduced strength.Ultimately,continuous heavy rainfall infiltration amplified the slope's weight,diminishing the weak structural plane's strength,leading to fracture propagation,slip plane penetration,and extensive tensile-shear and uplift failure of the slope.The study highlights poor geological conditions as the decisive factor for this landslide,with continuous heavy rainfall as the triggering factor.Presently,adverse environmental factors persistently affect the landslide,and deformation and failure continue to escalate.Hence,it is imperative to urgently implement integrated measures encompassing slope reinforcement,monitoring,and early-warning to real-time monitor the landslide's deformation and deep mechanical evolution trends.展开更多
A comprehensive analysis of the microstructure and defects of a thixomolded AZ91D alloy was conducted to elucidate their influences on mechanical properties.Samples were made at injection temperatures ranging from 580...A comprehensive analysis of the microstructure and defects of a thixomolded AZ91D alloy was conducted to elucidate their influences on mechanical properties.Samples were made at injection temperatures ranging from 580 to 640℃.X-ray computed tomography was used to visualize pores,and crystal plasticity finite element simulation was adopted for deformation analysis.The microstructure characterizations reveal a hierarchical cell feature composed of α-Mg and eutectic phases.With the increase of injection temperature,large cell content in the material decreases,while the strength of the alloy increases.The underlying mechanism about strength change is that coarse-grained solids experience smaller stress even in hard orientations.The sample fabricated at a moderate temperature of 620℃ exhibits the highest elongation,least quantity and lower local concentration of pores.The detachment and tearing cracks formed at lower injection temperature and defect bands formed at higher injection temperature add additional crack sources and deteriorate the ductility of the materials.展开更多
Forced imbibition,the invasion of a wetting fluid into porous rocks,plays an important role in the effective exploitation of hydrocarbon resources and the geological sequestration of carbon dioxide.However,the interfa...Forced imbibition,the invasion of a wetting fluid into porous rocks,plays an important role in the effective exploitation of hydrocarbon resources and the geological sequestration of carbon dioxide.However,the interface dynamics influenced by complex topology commonly leads to non-wetting fluid trapping.Particularly,the underlying mechanisms under viscously unfavorable conditions remain unclear.This study employs a direct numerical simulation method to simulate forced imbibition through the reconstructed digital rocks of sandstone.The interface dynamics and fluid–fluid interactions are investigated through transient simulations,while the pore topology metrics are introduced to analyze the impact on steady-state residual fluid distribution obtained by a pseudo-transient scheme.The results show that the cooperative pore-filling process promoted by corner flow is dominant at low capillary numbers.This leads to unstable inlet pressure,mass flow,and interface curvature,which correspond to complicated interface dynamics and higher residual fluid saturation.During forced imbibition,the interface curvature gradually increases,with the pore-filling mechanisms involving the cooperation of main terminal meniscus movement and arc menisci filling.Complex topology with small diameter pores may result in the destabilization of interface curvature.The residual fluid saturation is negatively correlated with porosity and pore throat size,and positively correlated with tortuosity and aspect ratio.A large mean coordination number characterizing global connectivity promotes imbibition.However,high connectivity characterized by the standardized Euler number corresponding to small pores is associated with a high probability of non-wetting fluid trapping.展开更多
Clayey-silt natural gas hydrate reservoirs in the South China Sea exhibit loose and unconsolidated structures, heterogeneous pore structures, high clay mineral contents, and strong hydrophilicity. These characteristic...Clayey-silt natural gas hydrate reservoirs in the South China Sea exhibit loose and unconsolidated structures, heterogeneous pore structures, high clay mineral contents, and strong hydrophilicity. These characteristics complicate the gas-water two-phase flow process in porous media following hydrate decomposition, posing challenges for efficient development. This study examines the transport response of clayey-silt reservoir samples from the Shenhu area using gas-water two-phase flow experiments and CT scanning to explore changes in pore structure, gas-water distribution, and relative permeability under varying flow conditions. The results indicate that pore heterogeneity significantly influences flow characteristics. Gas preferentially displaces water in larger pores, forming fracture-like pores, which serve as preferential flow channels for gas migration. The preferential flow channels enhance gas-phase permeability up to 19 times that of the water phase when fluid pressures exceed total stresses. However,small pores retain liquid, leading to a high residual water saturation of 0.561. CT imaging reveals that these hydro-fractures improve gas permeability but also confine gas flow to specific channels. Pore network analysis shows that gas injection expands the pore-throat network, enhancing connectivity and forming fracture-like pores. Residual water remains trapped in smaller pores and throats, while structural changes, including new fractures, improve gas flow pathways and overall connectivity. Relative permeability curves demonstrate a narrow gas-water cocurrent-flow zone, a right-shifted iso-permeability point and high reservoir capillary pressure, indicating a strong "water-blocking" effect. The findings suggest that optimizing reservoir stimulation techniques to enhance fracture formation, reduce residual water saturation, and improve gas flow capacity is critical for efficient hydrate reservoir development.展开更多
The design of roof frame is one of the most important parts of LNG tank design.In China,however,the calculation of roof frame system of extra-large LNG tanks is currently faced with a series of problems.For example,th...The design of roof frame is one of the most important parts of LNG tank design.In China,however,the calculation of roof frame system of extra-large LNG tanks is currently faced with a series of problems.For example,there is no united yardstick on buckling characteristic value,the calculation is based on many assumptions,and the calculation is inconsistent with domestic specifications and stipulations.In view of these problems,the material non-linearity and structural non-linearity were introduced and the initial defect was taken into consideration.Then,the large non-linear finite element calculation software ABAQUS was adopted to carry out modeling on the roof frame and liner system of extra-large LNG tanks and calculate and analyze the force applied on them and their stability.Finally,a complete set of design algorithm for the roof frame and liner system of extra-large LNG tanks was established and applied to the design of a certain LNG tank(20×10^(4)m^(3))in China.It is indicated that this design algorithm can simulate the actual situations accurately.This design algorithm is structurally composed of shell units and beam units,and it is connected in the pattern of common node.Besides,force calculation is conducted in 10 operational modes and the buckling calculation in 7 operational modes,including all operational modes in the construction process of roof frame and liner system of LNG tanks.It is also revealed that the maximum stress on the roof frame is 125.7 MPa,that on the liner is 101.4 MPa and the minimum safety coefficient used for buckling calculation is 2.57.Under this system,the force and stability of the roof frame of LNG tanks are satisfactory.The research results can be used as reference for relevant design and calculation.展开更多
Biomass-derived hard carbons,usually prepared by pyrolysis,are widely considered the most promising anode materials for sodium-ion bat-teries(SIBs)due to their high capacity,low poten-tial,sustainability,cost-effectiv...Biomass-derived hard carbons,usually prepared by pyrolysis,are widely considered the most promising anode materials for sodium-ion bat-teries(SIBs)due to their high capacity,low poten-tial,sustainability,cost-effectiveness,and environ-mental friendliness.The pyrolysis method affects the microstructure of the material,and ultimately its so-dium storage performance.Our previous work has shown that pyrolysis in a sealed graphite vessel im-proved the sodium storage performance of the car-bon,however the changes in its microstructure and the way this influences the sodium storage are still unclear.A series of hard carbon materials derived from corncobs(CCG-T,where T is the pyrolysis temperature)were pyrolyzed in a sealed graphite vessel at different temperatures.As the pyrolysis temperature increased from 1000 to 1400℃ small carbon domains gradually transformed into long and curved domains.At the same time,a greater number of large open pores with uniform apertures,as well as more closed pores,were formed.With the further increase of pyrolysis temperature to 1600℃,the long and curved domains became longer and straighter,and some closed pores gradually became open.CCG-1400,with abundant closed pores,had a superior SIB performance,with an initial reversible ca-pacity of 320.73 mAh g^(-1) at a current density of 30 mA g^(-1),an initial Coulomb efficiency(ICE)of 84.34%,and a capacity re-tention of 96.70%after 100 cycles.This study provides a method for the precise regulation of the microcrystalline and pore structures of hard carbon materials.展开更多
Based on the experimental results of casting thin section,low temperature nitrogen adsorption,high pressure mercury injection,nuclear magnetic resonance T2 spectrum,contact angle and oil-water interfacial tension,the ...Based on the experimental results of casting thin section,low temperature nitrogen adsorption,high pressure mercury injection,nuclear magnetic resonance T2 spectrum,contact angle and oil-water interfacial tension,the relationship between pore throat structure and crude oil mobility characteristics of full particle sequence reservoirs in the Lower Permian Fengcheng Formation of Mahu Sag,Junggar Basin,are revealed.(1)With the decrease of reservoir particle size,the volume of pores connected by large throats and the volume of large pores show a decreasing trend,and the distribution and peak ranges of throat and pore radius shift to smaller size in an orderly manner.The upper limits of throat radius,porosity and permeability of unconventional reservoirs in Fengcheng Formation are approximately 0.7μm,8%and 0.1×10^(−3)μm^(2),respectively.(2)As the reservoir particle size decreases,the distribution and peak ranges of pores hosting retained oil and movable oil are shifted to a smaller size in an orderly manner.With the increase of driving pressure,the amount of retained and movable oil of the larger particle reservoir samples shows a more obvious trend of decreasing and increasing,respectively.(3)With the increase of throat radius,the driving pressure of reservoir with different particle levels presents three stages,namely rapid decrease,slow decrease and stabilization.The oil driving pressures of various reservoirs and the differences of them decrease with the increase of temperature and obviously decrease with the increase of throat radius.According to the above experimental analysis,it is concluded that the deep shale oil of Fengcheng Formation in Mahu Sag has great potential for production under geological conditions.展开更多
Background:Enzyme fragility remains a major challenge in research and applications.Free enzymes are highly unstable,inactivated by heat,acid,alkali,or organic solvents,and often lose activity even under optimal storag...Background:Enzyme fragility remains a major challenge in research and applications.Free enzymes are highly unstable,inactivated by heat,acid,alkali,or organic solvents,and often lose activity even under optimal storage conditions.Limiting their use in cosmetics.Few commercial products combine acids and enzymes effectively.Objective:To investigate the physicochemical properties,in vitro exfoliation efficacy,and effects on facial skin parameters of a supramolecular acid-enzyme complex(SAE)composed of mandelic acid(MAN),betaine(BET),and composite enzymes(CE;papain and bromelain),thereby establishing a theoretical foundation for cosmetic applications.Methods:The supramolecular structure was characterized using Fourier transform infrared(FTIR)spectroscopy and proton nuclear magnetic resonance(1H NMR)spectroscopy.Dissolution experiments were conducted to compare the solubility of SAE and CE in aqueous solutions.Enzymatic activity assays evaluated the stabilizing effect of supramolecular deep eutectic technology on enzymes.In vitro exfoliation tests assessed acid-enzyme synergy in keratin removal.A 4-week clinical trial evaluated the efficacy of a 2%SAE essence aqueous solution on facial skin parameters.Results:Dissolution experiments confirmed that supramolecular deep eutectic technology significantly improved enzyme solubility.Enzymatic activity tests demonstrated that this technology effectively preserved protease activity,substantially enhancing its practical applicability.Furthermore,in vitro exfoliation efficacy tests revealed that this technology strengthened the synergistic interaction between acids and enzymes and exhibited superior stratum corneum-removing capability of the SAE.In clinical evaluations of efficacy,after 7 days of using the essence containing SAE,the formulation significantly enhanced cheek gloss(+8.08%),while reducing comedones volume(-16.25%).after 28 days,significantly enhanced cheek hydration(+25.0%,SCH),gloss(+15.93%),and smoothness(−7.78%SEsm),while reducing TEWL(−6.86%),sebum(−15.54%),roughness(+16.24%SEr),and pore metrics(volume:−39.98%;count:−30.64%),and decreased comedones(blackheads:−70.33%;Whiteheads:−52.42%;all p<0.05).Conclusion:The supramolecular acid-enzyme complex demonstrates enhanced stability,improved solubility,and superior exfoliation efficacy compared to free enzymes.Clinical results further confirm its multifunctional benefits,including enhancing skin hydration,sebum regulation,barrier repair,pore refinement,and comedolytic effects.This study provides both theoretical and practical foundations for developing stable acid-enzyme combinations in dermatological applications.展开更多
The development of sustainable electrode materials for energy storage systems has become very important and porous carbons derived from biomass have become an important candidate because of their tunable pore structur...The development of sustainable electrode materials for energy storage systems has become very important and porous carbons derived from biomass have become an important candidate because of their tunable pore structure,environmental friendliness,and cost-effectiveness.Recent advances in controlling the pore structure of these carbons and its relationship between to is energy storage performance are discussed,emphasizing the critical role of a balanced distribution of micropores,mesopores and macropores in determining electrochemical behavior.Particular attention is given to how the intrinsic components of biomass precursors(lignin,cellulose,and hemicellulose)influence pore formation during carbonization.Carbonization and activation strategies to precisely control the pore structure are introduced.Finally,key challenges in the industrial production of these carbons are outlined,and future research directions are proposed.These include the establishment of a database of biomass intrinsic structures and machine learning-assisted pore structure engineering,aimed at providing guidance for the design of high-performance carbon materials for next-generation energy storage devices.展开更多
Changes to the microstructure of a hard carbon(HC)and its solid electrolyte interface(SEI)can be effective in improving the electrode kinetics.However,achieving fast charging using a simple and inexpensive strategy wi...Changes to the microstructure of a hard carbon(HC)and its solid electrolyte interface(SEI)can be effective in improving the electrode kinetics.However,achieving fast charging using a simple and inexpensive strategy without sacrificing its initial Coulombic efficiency remains a challenge in sodium ion batteries.A simple liquid-phase coating approach has been used to generate a pitch-derived soft carbon layer on the HC surface,and its effect on the porosity of HC and SEI chemistry has been studied.A variety of structural characterizations show a soft carbon coating can increase the defect and ultra-micropore contents.The increase in ultra-micropore comes from both the soft carbon coatings and the larger pores within the HC that are partially filled by pitch,which provides more Na+storage sites.In-situ FTIR/EIS and ex-situ XPS showed that the soft carbon coating induced the formation of thinner SEI that is richer in NaF from the electrolyte,which stabilized the interface and promoted the charge transfer process.As a result,the anode produced fastcharging(329.8 mAh g^(−1)at 30 mA g^(−1)and 198.6 mAh g^(−1)at 300 mA g^(−1))and had a better cycling performance(a high capacity retention of 81.4%after 100 cycles at 150 mA g^(−1)).This work reveals the critical role of coating layer in changing the pore structure,SEI chemistry and diffusion kinetics of hard carbon,which enables rational design of sodium-ion battery anode with enhanced fast charging capability.展开更多
Four types of Mg-5Zn porous scaffolds with different pore geometries,including body-centered cubic(bcc),the rhombic dodecahedron(RD),gyroid(G),and primitive(P)types,were designed and fabricated using selective laser m...Four types of Mg-5Zn porous scaffolds with different pore geometries,including body-centered cubic(bcc),the rhombic dodecahedron(RD),gyroid(G),and primitive(P)types,were designed and fabricated using selective laser melting.Their forming quality,compression mechanical properties,and degradation behavior were investigated.Results indicate that the fabricated scaffolds exhibit good dimensional accuracy,and the surface chemical polishing treatment significantly improves the forming quality and reduces porosity error in porous scaffolds.Compared to the ones with rod structures(bcc,RD),the scaffolds with surface structures(G,P)have less powder particle adhesion.The G porous scaffold exhibits the best forming quality for the same design porosity.The predominant failure mode of scaffolds during compression is a 45°shear fracture.At a porosity of 75%,the compression property of all scaffolds meets the compressive property requirements of cancellous bone,while bcc and G structures show relatively better compression property.After immersion in Hank's solution for 168 h,the B-2-75% pore structure scaffold exhibits severe localized corrosion,with fractures in partial pillar connections.In contrast,the G-3-75% pore structure scaffold mainly undergoes uniform corrosion,maintaining structural integrity,and its corrosion rate and loss of compressive properties are less than those of the B-2-75%structure.After comparison,the G-pore structure scaffold is preferred.展开更多
基金the support of the National Natural Science Foundation of China(Nos.22205207 and 22378369).
文摘Zeolites are crystalline microporous materials widely used in catalysis,adsorption,and ion exchange owing to their tunable pore structures and acid centers[1].Traditional zeolites,however,often suffer from limitations such as restricted molecular diffusion and rapid coking,which hinder their efficiency in processing large molecules.
基金Project supported by the National Natural Science Foundation of China.
文摘In the late 1970s, the discovery of the alumindnophosphate molecular sieveminerals which have been called a new generation led to framework composition oxideoutside of the aluminium-silicon system. The largest secondary building unit (SBU)of 18 T-atom rings has been maintained more than 180 years[2]. Only just in 1988,the molecular sieve with eighteen membered-ringr was reported by Davis and calledVIP-5 after the Virginia Polytechnic Institute. But a dissent has been expressed byDuncan for this. It was considered that VPI-5 does not represent a
基金The National Natural Science Foundation of China(Grant No.12462006)Beijing Institute of Structure and Environment Engineering Joint Innovation Fund(No.BQJJ202414).
文摘THE mechanical response and deformation mechanisms of pure nickel under nanoindentation were systematically investigated using molecular dynamics(MD)simulations,with a particular focus on the novel interplay between crystallographic orientation,grain boundary(GB)proximity,and pore characteristics(size/location).This study compares single-crystal nickel models along[100],[110],and[111]orientations with equiaxed polycrystalline models containing 0,1,and 2.5 nm pores in surface and subsurface configurations.Our results reveal that crystallographic anisotropy manifests as a 24.4%higher elastic modulus and 22.2%greater hardness in[111]-oriented single crystals compared to[100].Pore-GB synergistic effects are found to dominate the deformation behavior:2.5 nm subsurface pores reduce hardness by 25.2%through stress concentration and dislocation annihilation at GBs,whereas surface pores enable mechanical recovery via accelerated dislocation generation post-collapse.Additionally,size-dependent deformation regimes were identified,with 1 nm pores inducing negligible perturbation due to rapid atomic rearrangement,in contrast with persistent softening in 2.5 nm pores.These findings establish atomic-scale design principles for defect engineering in nickel-based aerospace components,demonstrating how crystallographic orientation,pore configuration,and GB interactions collectively govern nanoindentation behavior.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korean government(MSIT)(No.NRF-2021M3H4A1A02048529)the Ministry of Trade,Industry and Energy(MOTIE)of the Korean government under grant No.RS-2022-00155854support from the DGIST Supercomputing and Big Data Center.
文摘To enhance the electrochemical performance of lithium-ion battery anodes with higher silicon content,it is essential to engineer their microstructure for better lithium-ion transport and mitigated volume change as well.Herein,we suggest an effective approach to control the micropore structure of silicon oxide(SiO_(x))/artificial graphite(AG)composite electrodes using a perforated current collector.The electrode features a unique pore structure,where alternating high-porosity domains and low-porosity domains markedly reduce overall electrode resistance,leading to a 20%improvement in rate capability at a 5C-rate discharge condition.Using microstructure-resolved modeling and simulations,we demonstrate that the patterned micropore structure enhances lithium-ion transport,mitigating the electrolyte concentration gradient of lithium-ion.Additionally,perforating current collector with a chemical etching process increases the number of hydrogen bonding sites and enlarges the interface with the SiO_(x)/AG composite electrode,significantly improving adhesion strength.This,in turn,suppresses mechanical degradation and leads to a 50%higher capacity retention.Thus,regularly arranged micropore structure enabled by the perforated current collector successfully improves both rate capability and cycle life in SiO_(x)/AG composite electrodes,providing valuable insights into electrode engineering.
基金supported by the National Natural Science Foundation of China (Grant No. 31271678)the Jiangsu Agricultural Scientific Self-Innovation Fund (Grant No. CX[11]4023)the Super Rice Breeding and Demonstration Program of the Ministry of Agriculture in China
文摘Grain size traits, including grain length, grain width and grain thickness, are controlled by quantitative trait loci （QTLs）. Many QTLs relating to rice grain size traits had been reported, but their control mechanisms have not yet been elucidated. A recombinant inbred line （RIL） population of 240 lines, deriving from a cross between TD70, an extra-large grain size japonica line with 80 g of 1000-grain weight, and Kasalath, a small grain size indica variety, were constructed and used to map grain size QTLs to a linkage map by using 141 SSR markers in 2010 and 2011. Five QTLs for grain length, six for grain width and seven for grain thickness were detected distributing over chromosomes 2, 3, 5, 7, 9 and 12. Seven QTLs, namely qGL3.1, qGW2, qGW2.2, qGW5.1, qGW5.2, qGT2.3 and qGT3.1, were detected in either of the two years and explained for 56.19%, 4.42%, 29.41%, 10.37%, 7.61%, 21.19% and 17.06% of the observed phenotypic variances on average, respectively. The marker interval RM1347-RM5699 on chromosome 2 was found common for grain length, grain width and grain thickness; qGL3.1 and qGT3.1 were mapped to the same interval RM6080-RM6832 on chromosome 3. All 18 QTL alleles were derived from the large grain parent TD70. Most of the QTLs mapped in the present study were found the same as the genes previously cloned （GW2, GS3 or qGL3, GW5 and GS5）, and several were the same as the QTLs （GS7 and qGL-7） previously mapped. Three QTLs, qGL2.2 on chromosome 2, qGW9 and qGT9 on chromosome 9, were first detected. These results laid a foundation for further fine mapping or cloning of these QTLs.
基金supported by the National Natural Science Foundation of China (No. 51304206)the Project of National Scientific and Technical Supporting Programs Foundation of China (No. 2012BAB13B03)the Program for New Century Excellent Talents in University of Ministry of Education of China (No. NCET-11-0728)
文摘In solid backfill mining without gangue removal, the gangue is separated directly underground and backfilled into goaf. This necessitates the underground construction of an extra-large section chamber for separation equipments. For the construction of an extra-large section chamber in the Tangshan mine, we proposed an active support through a combination of bolting, anchor cables, lining, and a reinforced chamber floor by inverted arch pouring. ABAQUS software was used to analyze the surrounding rock deformation and the plastic zone development of the chamber under different excavation schemes.The best excavation scheme was determined, and the effectiveness of the combined supports was verified. In practice, the engineering installation showed good overall control of the movement of the surrounding rock, with roof-to-floor and side-to-side convergences of 154.6 and 77.5 mm, respectively,which meets the requirements for underground coal gangue separation.
文摘1Project objective Extra-large shield tunnels have become the best choice for urban transportation tunnels due to the advantage of taking the best use of underground space.Hengqin Island in Zhuhai is a demonstration area to explore a new cooperation mode among Guangzhou,Hong Kong and Macao,which is also an important pivot of the 21st Century Maritime Silk Road.Thus,it takes an important role in serving Hong Kong and Macao and driving the economic development of the Pearl River Delta.However,as typhoons are frequent in Zhuhai,Hengqin Island will be isolated to the mainland when bridges are obstructed in typhoon seasons.Therefore,the bridges cannot satisfy the traffic demand to the island.The inconvenient transportation has a neglect influence on production and live of people on the island,which also affects the long term development of Hengqin Island.Apart from the two existed bridges,Maliuzhou Traffic Tunnel in Zhuhai is the third major link of Hengqin Island to the mainland,which will put an end to the"losing connectionM problem due to obstructing the bridges in typhoon seasons.This linkage is able to promote Zhuhai tourism exploitation and the long term development of the city,and also increase the security of peopled lives.Meanwhile,the construction of the Maliuzhou Traffic Tunnel has conquered the challenges in designing and building of the extra-large shield tunnel in composite ground and undersea circumstances.The designing methods and constructing approaches used in this project will provide theoretical supports and technical guarantees to similar projects.
基金supported by National Key Research and Development Program of China under Grants 2021YFB1600500,2021YFB3201502,and 2022YFB3207704Natural Science Foundation of China(NSFC)under Grants U2233216,62071044,61827901,62088101 and 62201056+1 种基金supported by Shandong Province Natural Science Foundation under Grant ZR2022YQ62supported by Beijing Nova Program,Beijing Institute of Technology Research Fund Program for Young Scholars under grant XSQD-202121009.
文摘The extra-large scale multiple-input multiple-output(XL-MIMO)for the beyond fifth/sixth generation mobile communications is a promising technology to provide Tbps data transmission and stable access service.However,the extremely large antenna array aperture arouses the channel near-field effect,resulting in the deteriorated data rate and other challenges in the practice communication systems.Meanwhile,multi-panel MIMO technology has attracted extensive attention due to its flexible configuration,low hardware cost,and wider coverage.By combining the XL-MIMO and multi-panel array structure,we construct multi-panel XL-MIMO and apply it to massive Internet of Things(IoT)access.First,we model the multi-panel XL-MIMO-based near-field channels for massive IoT access scenarios,where the electromagnetic waves corresponding to different panels have different angles of arrival/departure(AoAs/AoDs).Then,by exploiting the sparsity of the near-field massive IoT access channels,we formulate a compressed sensing based joint active user detection(AUD)and channel estimation(CE)problem which is solved by AMP-EM-MMV algorithm.The simulation results exhibit the superiority of the AMP-EM-MMV based joint AUD and CE scheme over the baseline algorithms.
基金supported in part by the Natural Science Foundation of China(NSFC)under Grant 62071044 and Grant 62088101in part by the Shandong Province Natural Science Foundation under Grant ZR2022YQ62in part by the Beijing Nova Program.
文摘The current High-Speed Railway(HSR)communications increasingly fail to satisfy the massive access services of numerous user equipment brought by the increasing number of people traveling by HSRs.To this end,this paper investigates millimeter-Wave(mmWave)extra-large scale(XL)-MIMO-based massive Internet-of-Things(loT)access in near-field HSR communications,and proposes a block simultaneous orthogonal matching pursuit(B-SOMP)-based Active User Detection(AUD)and Channel Estimation(CE)scheme by exploiting the spatial block sparsity of the XLMIMO-based massive access channels.Specifically,we first model the uplink mmWave XL-MIMO channels,which exhibit the near-field propagation characteristics of electromagnetic signals and the spatial non-stationarity of mmWave XL-MIMO arrays.By exploiting the spatial block sparsity and common frequency-domain sparsity pattern of massive access channels,the joint AUD and CE problem can be then formulated as a Multiple Measurement Vectors Compressive Sensing(MIMV-CS)problem.Based on the designed sensing matrix,a B-SOMP algorithm is proposed to achieve joint AUD and CE.Finally,simulation results show that the proposed solution can obtain a better AUD and CE performance than the conventional CS-based scheme for massive IoT access in near-field HSR communications.
基金supported by the National Natural Science Foundation of China(Grant No.52074295)the State Key Laboratory for GeoMechanics and Deep Underground Engineering,China University of Mining&Technology,Beijing(Grant No.SKLGDUEK202217).
文摘An extra-large landslide occurred on June 19,2021,on the footwall slope of the Nanfen Open-pit Iron Mine in Liaoning Province,China,with a volume of approximately 1.2×107 m3.To elucidate the causative factors,development process,and destructive mechanisms of this catastrophic landslide,comprehensive field tests,investigations,and laboratory experiments were conducted.Initially,the heavily weathered rock mass of the slope was intersected by faults and joint fissures,facilitating rainwater infiltration.Moreover,the landslide contained a substantial clay mineral with highly developed micro-cracks and micro-pores,exhibiting strong water-absorption properties.As moisture content increased,the rock mass underwent softening,resulting in reduced strength.Ultimately,continuous heavy rainfall infiltration amplified the slope's weight,diminishing the weak structural plane's strength,leading to fracture propagation,slip plane penetration,and extensive tensile-shear and uplift failure of the slope.The study highlights poor geological conditions as the decisive factor for this landslide,with continuous heavy rainfall as the triggering factor.Presently,adverse environmental factors persistently affect the landslide,and deformation and failure continue to escalate.Hence,it is imperative to urgently implement integrated measures encompassing slope reinforcement,monitoring,and early-warning to real-time monitor the landslide's deformation and deep mechanical evolution trends.
基金supported by the National Natural Science Foundation of China(Nos.51825101,52001202)the National Key Research and Development Program of China(No.2021YFA1600900)。
文摘A comprehensive analysis of the microstructure and defects of a thixomolded AZ91D alloy was conducted to elucidate their influences on mechanical properties.Samples were made at injection temperatures ranging from 580 to 640℃.X-ray computed tomography was used to visualize pores,and crystal plasticity finite element simulation was adopted for deformation analysis.The microstructure characterizations reveal a hierarchical cell feature composed of α-Mg and eutectic phases.With the increase of injection temperature,large cell content in the material decreases,while the strength of the alloy increases.The underlying mechanism about strength change is that coarse-grained solids experience smaller stress even in hard orientations.The sample fabricated at a moderate temperature of 620℃ exhibits the highest elongation,least quantity and lower local concentration of pores.The detachment and tearing cracks formed at lower injection temperature and defect bands formed at higher injection temperature add additional crack sources and deteriorate the ductility of the materials.
基金supported by the National Natural Science Foundation of China(Grant Nos.42172159 and 42302143)the Postdoctora Fellowship Program of the China Postdoctoral Science Foundation(CPSF)(Grant No.GZB20230864).
文摘Forced imbibition,the invasion of a wetting fluid into porous rocks,plays an important role in the effective exploitation of hydrocarbon resources and the geological sequestration of carbon dioxide.However,the interface dynamics influenced by complex topology commonly leads to non-wetting fluid trapping.Particularly,the underlying mechanisms under viscously unfavorable conditions remain unclear.This study employs a direct numerical simulation method to simulate forced imbibition through the reconstructed digital rocks of sandstone.The interface dynamics and fluid–fluid interactions are investigated through transient simulations,while the pore topology metrics are introduced to analyze the impact on steady-state residual fluid distribution obtained by a pseudo-transient scheme.The results show that the cooperative pore-filling process promoted by corner flow is dominant at low capillary numbers.This leads to unstable inlet pressure,mass flow,and interface curvature,which correspond to complicated interface dynamics and higher residual fluid saturation.During forced imbibition,the interface curvature gradually increases,with the pore-filling mechanisms involving the cooperation of main terminal meniscus movement and arc menisci filling.Complex topology with small diameter pores may result in the destabilization of interface curvature.The residual fluid saturation is negatively correlated with porosity and pore throat size,and positively correlated with tortuosity and aspect ratio.A large mean coordination number characterizing global connectivity promotes imbibition.However,high connectivity characterized by the standardized Euler number corresponding to small pores is associated with a high probability of non-wetting fluid trapping.
基金the National Natural Science Foundation of China (Nos. 42302143, 42172159)China Geological Survey Project (No. DD20211350)support from the G. Albert Shoemaker endowment
文摘Clayey-silt natural gas hydrate reservoirs in the South China Sea exhibit loose and unconsolidated structures, heterogeneous pore structures, high clay mineral contents, and strong hydrophilicity. These characteristics complicate the gas-water two-phase flow process in porous media following hydrate decomposition, posing challenges for efficient development. This study examines the transport response of clayey-silt reservoir samples from the Shenhu area using gas-water two-phase flow experiments and CT scanning to explore changes in pore structure, gas-water distribution, and relative permeability under varying flow conditions. The results indicate that pore heterogeneity significantly influences flow characteristics. Gas preferentially displaces water in larger pores, forming fracture-like pores, which serve as preferential flow channels for gas migration. The preferential flow channels enhance gas-phase permeability up to 19 times that of the water phase when fluid pressures exceed total stresses. However,small pores retain liquid, leading to a high residual water saturation of 0.561. CT imaging reveals that these hydro-fractures improve gas permeability but also confine gas flow to specific channels. Pore network analysis shows that gas injection expands the pore-throat network, enhancing connectivity and forming fracture-like pores. Residual water remains trapped in smaller pores and throats, while structural changes, including new fractures, improve gas flow pathways and overall connectivity. Relative permeability curves demonstrate a narrow gas-water cocurrent-flow zone, a right-shifted iso-permeability point and high reservoir capillary pressure, indicating a strong "water-blocking" effect. The findings suggest that optimizing reservoir stimulation techniques to enhance fracture formation, reduce residual water saturation, and improve gas flow capacity is critical for efficient hydrate reservoir development.
基金Project supported by the Special and Significant Project of China National Offshore Oil Corporation“Study on the design of full-containment large LNG storage tank and engineering applications”(No.:CNOOC-KJ125ZDXM14QD-04QD11).
文摘The design of roof frame is one of the most important parts of LNG tank design.In China,however,the calculation of roof frame system of extra-large LNG tanks is currently faced with a series of problems.For example,there is no united yardstick on buckling characteristic value,the calculation is based on many assumptions,and the calculation is inconsistent with domestic specifications and stipulations.In view of these problems,the material non-linearity and structural non-linearity were introduced and the initial defect was taken into consideration.Then,the large non-linear finite element calculation software ABAQUS was adopted to carry out modeling on the roof frame and liner system of extra-large LNG tanks and calculate and analyze the force applied on them and their stability.Finally,a complete set of design algorithm for the roof frame and liner system of extra-large LNG tanks was established and applied to the design of a certain LNG tank(20×10^(4)m^(3))in China.It is indicated that this design algorithm can simulate the actual situations accurately.This design algorithm is structurally composed of shell units and beam units,and it is connected in the pattern of common node.Besides,force calculation is conducted in 10 operational modes and the buckling calculation in 7 operational modes,including all operational modes in the construction process of roof frame and liner system of LNG tanks.It is also revealed that the maximum stress on the roof frame is 125.7 MPa,that on the liner is 101.4 MPa and the minimum safety coefficient used for buckling calculation is 2.57.Under this system,the force and stability of the roof frame of LNG tanks are satisfactory.The research results can be used as reference for relevant design and calculation.
文摘Biomass-derived hard carbons,usually prepared by pyrolysis,are widely considered the most promising anode materials for sodium-ion bat-teries(SIBs)due to their high capacity,low poten-tial,sustainability,cost-effectiveness,and environ-mental friendliness.The pyrolysis method affects the microstructure of the material,and ultimately its so-dium storage performance.Our previous work has shown that pyrolysis in a sealed graphite vessel im-proved the sodium storage performance of the car-bon,however the changes in its microstructure and the way this influences the sodium storage are still unclear.A series of hard carbon materials derived from corncobs(CCG-T,where T is the pyrolysis temperature)were pyrolyzed in a sealed graphite vessel at different temperatures.As the pyrolysis temperature increased from 1000 to 1400℃ small carbon domains gradually transformed into long and curved domains.At the same time,a greater number of large open pores with uniform apertures,as well as more closed pores,were formed.With the further increase of pyrolysis temperature to 1600℃,the long and curved domains became longer and straighter,and some closed pores gradually became open.CCG-1400,with abundant closed pores,had a superior SIB performance,with an initial reversible ca-pacity of 320.73 mAh g^(-1) at a current density of 30 mA g^(-1),an initial Coulomb efficiency(ICE)of 84.34%,and a capacity re-tention of 96.70%after 100 cycles.This study provides a method for the precise regulation of the microcrystalline and pore structures of hard carbon materials.
基金Supported by Leading Talent Program of Autonomous Region(2022TSYCLJ0070)PetroChina Prospective and Basic Technological Project(2021DJ0108)Natural Science Foundation for Outstanding Young People in Shandong Province(ZR2022YQ30).
文摘Based on the experimental results of casting thin section,low temperature nitrogen adsorption,high pressure mercury injection,nuclear magnetic resonance T2 spectrum,contact angle and oil-water interfacial tension,the relationship between pore throat structure and crude oil mobility characteristics of full particle sequence reservoirs in the Lower Permian Fengcheng Formation of Mahu Sag,Junggar Basin,are revealed.(1)With the decrease of reservoir particle size,the volume of pores connected by large throats and the volume of large pores show a decreasing trend,and the distribution and peak ranges of throat and pore radius shift to smaller size in an orderly manner.The upper limits of throat radius,porosity and permeability of unconventional reservoirs in Fengcheng Formation are approximately 0.7μm,8%and 0.1×10^(−3)μm^(2),respectively.(2)As the reservoir particle size decreases,the distribution and peak ranges of pores hosting retained oil and movable oil are shifted to a smaller size in an orderly manner.With the increase of driving pressure,the amount of retained and movable oil of the larger particle reservoir samples shows a more obvious trend of decreasing and increasing,respectively.(3)With the increase of throat radius,the driving pressure of reservoir with different particle levels presents three stages,namely rapid decrease,slow decrease and stabilization.The oil driving pressures of various reservoirs and the differences of them decrease with the increase of temperature and obviously decrease with the increase of throat radius.According to the above experimental analysis,it is concluded that the deep shale oil of Fengcheng Formation in Mahu Sag has great potential for production under geological conditions.
文摘Background:Enzyme fragility remains a major challenge in research and applications.Free enzymes are highly unstable,inactivated by heat,acid,alkali,or organic solvents,and often lose activity even under optimal storage conditions.Limiting their use in cosmetics.Few commercial products combine acids and enzymes effectively.Objective:To investigate the physicochemical properties,in vitro exfoliation efficacy,and effects on facial skin parameters of a supramolecular acid-enzyme complex(SAE)composed of mandelic acid(MAN),betaine(BET),and composite enzymes(CE;papain and bromelain),thereby establishing a theoretical foundation for cosmetic applications.Methods:The supramolecular structure was characterized using Fourier transform infrared(FTIR)spectroscopy and proton nuclear magnetic resonance(1H NMR)spectroscopy.Dissolution experiments were conducted to compare the solubility of SAE and CE in aqueous solutions.Enzymatic activity assays evaluated the stabilizing effect of supramolecular deep eutectic technology on enzymes.In vitro exfoliation tests assessed acid-enzyme synergy in keratin removal.A 4-week clinical trial evaluated the efficacy of a 2%SAE essence aqueous solution on facial skin parameters.Results:Dissolution experiments confirmed that supramolecular deep eutectic technology significantly improved enzyme solubility.Enzymatic activity tests demonstrated that this technology effectively preserved protease activity,substantially enhancing its practical applicability.Furthermore,in vitro exfoliation efficacy tests revealed that this technology strengthened the synergistic interaction between acids and enzymes and exhibited superior stratum corneum-removing capability of the SAE.In clinical evaluations of efficacy,after 7 days of using the essence containing SAE,the formulation significantly enhanced cheek gloss(+8.08%),while reducing comedones volume(-16.25%).after 28 days,significantly enhanced cheek hydration(+25.0%,SCH),gloss(+15.93%),and smoothness(−7.78%SEsm),while reducing TEWL(−6.86%),sebum(−15.54%),roughness(+16.24%SEr),and pore metrics(volume:−39.98%;count:−30.64%),and decreased comedones(blackheads:−70.33%;Whiteheads:−52.42%;all p<0.05).Conclusion:The supramolecular acid-enzyme complex demonstrates enhanced stability,improved solubility,and superior exfoliation efficacy compared to free enzymes.Clinical results further confirm its multifunctional benefits,including enhancing skin hydration,sebum regulation,barrier repair,pore refinement,and comedolytic effects.This study provides both theoretical and practical foundations for developing stable acid-enzyme combinations in dermatological applications.
文摘The development of sustainable electrode materials for energy storage systems has become very important and porous carbons derived from biomass have become an important candidate because of their tunable pore structure,environmental friendliness,and cost-effectiveness.Recent advances in controlling the pore structure of these carbons and its relationship between to is energy storage performance are discussed,emphasizing the critical role of a balanced distribution of micropores,mesopores and macropores in determining electrochemical behavior.Particular attention is given to how the intrinsic components of biomass precursors(lignin,cellulose,and hemicellulose)influence pore formation during carbonization.Carbonization and activation strategies to precisely control the pore structure are introduced.Finally,key challenges in the industrial production of these carbons are outlined,and future research directions are proposed.These include the establishment of a database of biomass intrinsic structures and machine learning-assisted pore structure engineering,aimed at providing guidance for the design of high-performance carbon materials for next-generation energy storage devices.
基金National Key Research and Development Program of China(2022YFE0206300)National Natural Science Foundation of China(U21A2081,22075074,22209047)+2 种基金Guangdong Basic and Applied Basic Research Foundation(2024A1515011620)Hunan Provincial Natural Science Foundation of China(2024JJ5068)Foundation of Yuelushan Center for Industrial Innovation(2023YCII0119)。
文摘Changes to the microstructure of a hard carbon(HC)and its solid electrolyte interface(SEI)can be effective in improving the electrode kinetics.However,achieving fast charging using a simple and inexpensive strategy without sacrificing its initial Coulombic efficiency remains a challenge in sodium ion batteries.A simple liquid-phase coating approach has been used to generate a pitch-derived soft carbon layer on the HC surface,and its effect on the porosity of HC and SEI chemistry has been studied.A variety of structural characterizations show a soft carbon coating can increase the defect and ultra-micropore contents.The increase in ultra-micropore comes from both the soft carbon coatings and the larger pores within the HC that are partially filled by pitch,which provides more Na+storage sites.In-situ FTIR/EIS and ex-situ XPS showed that the soft carbon coating induced the formation of thinner SEI that is richer in NaF from the electrolyte,which stabilized the interface and promoted the charge transfer process.As a result,the anode produced fastcharging(329.8 mAh g^(−1)at 30 mA g^(−1)and 198.6 mAh g^(−1)at 300 mA g^(−1))and had a better cycling performance(a high capacity retention of 81.4%after 100 cycles at 150 mA g^(−1)).This work reveals the critical role of coating layer in changing the pore structure,SEI chemistry and diffusion kinetics of hard carbon,which enables rational design of sodium-ion battery anode with enhanced fast charging capability.
基金Science and Technology Planning Project of Inner Mongolia Science and Technology Department(2022YFSH0021)Key Research and Development Program of Shaanxi Province(2024SF2-GJHX-14,2021SF-296)。
文摘Four types of Mg-5Zn porous scaffolds with different pore geometries,including body-centered cubic(bcc),the rhombic dodecahedron(RD),gyroid(G),and primitive(P)types,were designed and fabricated using selective laser melting.Their forming quality,compression mechanical properties,and degradation behavior were investigated.Results indicate that the fabricated scaffolds exhibit good dimensional accuracy,and the surface chemical polishing treatment significantly improves the forming quality and reduces porosity error in porous scaffolds.Compared to the ones with rod structures(bcc,RD),the scaffolds with surface structures(G,P)have less powder particle adhesion.The G porous scaffold exhibits the best forming quality for the same design porosity.The predominant failure mode of scaffolds during compression is a 45°shear fracture.At a porosity of 75%,the compression property of all scaffolds meets the compressive property requirements of cancellous bone,while bcc and G structures show relatively better compression property.After immersion in Hank's solution for 168 h,the B-2-75% pore structure scaffold exhibits severe localized corrosion,with fractures in partial pillar connections.In contrast,the G-3-75% pore structure scaffold mainly undergoes uniform corrosion,maintaining structural integrity,and its corrosion rate and loss of compressive properties are less than those of the B-2-75%structure.After comparison,the G-pore structure scaffold is preferred.
