The objectives of this study were to analyze the distribution of equivalent strain rate near the stagnation point and probe into the effects of colliding angle on strain rate. An ideal fluid model of symmetrically col...The objectives of this study were to analyze the distribution of equivalent strain rate near the stagnation point and probe into the effects of colliding angle on strain rate. An ideal fluid model of symmetrically colliding was used to research them. Calculations showed the equivalent strain rate and the colliding half angle are closely related to each other with the material geometrical size and explosive velocity selected, the equivalent strain has large gradient within several jet thicknesses near the stagnation point, the maximal strain points are lined up along a beeline, but a curve near the stagnation point. With different colliding angles, they can be fitted by using exponential curve. That is, the exponential curve can be regarded as the token curve in explosive welding..展开更多
The wavy interface for similar or the same metal explosive welding（EXW） and the universal mechanism of wavy interface formation in EXW were studied in this work. Based on a new established model, it was deduced that...The wavy interface for similar or the same metal explosive welding（EXW） and the universal mechanism of wavy interface formation in EXW were studied in this work. Based on a new established model, it was deduced that the evolution frequencies of the instability were constrained in a limited range. Then experiments of identical metal EXW were performed and welding interfaces were characterized for examining the final morphology. By calculating the fractal dimensions and multifractal spectra of welding interface, the fractal characteristics of interface were revealed and a quantitative description was achieved for EXW interface structure. Thus, the formation, evolution and final morphology of wavy interface were systemically researched.展开更多
It was aim to investigate the interfacial microstructure and shear performance of Ti/Cu clad sheet produced by explosive welding and annealing. The experimental results demonstrate that the alternate distribution of i...It was aim to investigate the interfacial microstructure and shear performance of Ti/Cu clad sheet produced by explosive welding and annealing. The experimental results demonstrate that the alternate distribution of interfacial collision and vortex of flyer layer forms in the interface a few of solidification structure. TEM confirms that the interfacial interlayer contains obvious lattice distortion structure and intermetallic compounds. It interprets the explosive welding as the interfacial deformation and thermal diffusion process between dissimilar metals. The interfacial shear strength is very close to the Cu matrix strength, which is determined by the mixture of the mechanical bonding and metallurgical bonding. Several cracks exist on the shear fracture owing to the intermetallic compound in the interfacial solidifi cation structure and also the probable welding inclusion.展开更多
The influence of explosive charge thickness on the quality of explosive welding of dissimilar metals was investigated.The lower limit law should be followed in the course of explosive welding.Three welding experiments...The influence of explosive charge thickness on the quality of explosive welding of dissimilar metals was investigated.The lower limit law should be followed in the course of explosive welding.Three welding experiments of stainless steel（410S）and steel（Q345R）were carried out in three different kinds of explosive charge thicknesses,namely 15,25and 35mm.Interfaces of morphology and mechanical properties of three samples were observed and tested.It was found that micro and small wavy bonding is mainly formed for charge thickness of 15mm whose strength is the highest with minor deformation and few defects in the interface;small and middle wavy bonding are mainly formed for charge thickness of 25 mm whose strength is comparatively mediocre;big wavy bonding is mainly formed for charge thickness of 35 mm whose strength is the lowest.The cause of high bonding strength of the micro and small wavy interface was analyzed and verified on the basis of the results of Electron Probe Micro-Analyzer（EPMA）tests of three selected samples.展开更多
文摘The objectives of this study were to analyze the distribution of equivalent strain rate near the stagnation point and probe into the effects of colliding angle on strain rate. An ideal fluid model of symmetrically colliding was used to research them. Calculations showed the equivalent strain rate and the colliding half angle are closely related to each other with the material geometrical size and explosive velocity selected, the equivalent strain has large gradient within several jet thicknesses near the stagnation point, the maximal strain points are lined up along a beeline, but a curve near the stagnation point. With different colliding angles, they can be fitted by using exponential curve. That is, the exponential curve can be regarded as the token curve in explosive welding..
基金Funded by the National Natural Science Foundation of China(Nos.11202093 and 11662010)
文摘The wavy interface for similar or the same metal explosive welding（EXW） and the universal mechanism of wavy interface formation in EXW were studied in this work. Based on a new established model, it was deduced that the evolution frequencies of the instability were constrained in a limited range. Then experiments of identical metal EXW were performed and welding interfaces were characterized for examining the final morphology. By calculating the fractal dimensions and multifractal spectra of welding interface, the fractal characteristics of interface were revealed and a quantitative description was achieved for EXW interface structure. Thus, the formation, evolution and final morphology of wavy interface were systemically researched.
基金Funded by the National Natural Science Foundation of China(Nos.U1332110 and 50971038)the Project of"Liaoning Bai Qian Wan Talents Program"of China(No.2013921071)
文摘It was aim to investigate the interfacial microstructure and shear performance of Ti/Cu clad sheet produced by explosive welding and annealing. The experimental results demonstrate that the alternate distribution of interfacial collision and vortex of flyer layer forms in the interface a few of solidification structure. TEM confirms that the interfacial interlayer contains obvious lattice distortion structure and intermetallic compounds. It interprets the explosive welding as the interfacial deformation and thermal diffusion process between dissimilar metals. The interfacial shear strength is very close to the Cu matrix strength, which is determined by the mixture of the mechanical bonding and metallurgical bonding. Several cracks exist on the shear fracture owing to the intermetallic compound in the interfacial solidifi cation structure and also the probable welding inclusion.
基金supported by the National Natural Science Foundation of China(No.51541112)Special Fund Achievement Transformation Projects in Jiangsu(No.BA2012030)
文摘The influence of explosive charge thickness on the quality of explosive welding of dissimilar metals was investigated.The lower limit law should be followed in the course of explosive welding.Three welding experiments of stainless steel（410S）and steel（Q345R）were carried out in three different kinds of explosive charge thicknesses,namely 15,25and 35mm.Interfaces of morphology and mechanical properties of three samples were observed and tested.It was found that micro and small wavy bonding is mainly formed for charge thickness of 15mm whose strength is the highest with minor deformation and few defects in the interface;small and middle wavy bonding are mainly formed for charge thickness of 25 mm whose strength is comparatively mediocre;big wavy bonding is mainly formed for charge thickness of 35 mm whose strength is the lowest.The cause of high bonding strength of the micro and small wavy interface was analyzed and verified on the basis of the results of Electron Probe Micro-Analyzer（EPMA）tests of three selected samples.
