Cardiac injury initiates repair mechanisms and results in cardiac remodeling and fi-brosis,which appears to be a leading cause of cardiovascular diseases.Cardiac fi-brosis is characterized by the accumulation of extra...Cardiac injury initiates repair mechanisms and results in cardiac remodeling and fi-brosis,which appears to be a leading cause of cardiovascular diseases.Cardiac fi-brosis is characterized by the accumulation of extracellular matrix proteins,mainly collagen in the cardiac interstitium.Many experimental studies have demonstrated that fibrotic injury in the heart is reversible;therefore,it is vital to understand differ-ent molecular mechanisms that are involved in the initiation,progression,and resolu-tion of cardiac fibrosis to enable the development of antifibrotic agents.Of the many experimental models,one of the recent models that has gained renewed interest is isoproterenol(ISP)-induced cardiac fibrosis.ISP is a synthetic catecholamine,sympa-thomimetic,and nonselectiveβ-adrenergic receptor agonist.The overstimulated and sustained activation ofβ-adrenergic receptors has been reported to induce biochemi-cal and physiological alterations and ultimately result in cardiac remodeling.ISP has been used for decades to induce acute myocardial infarction.However,the use of low doses and chronic administration of ISP have been shown to induce cardiac fibrosis;this practice has increased in recent years.Intraperitoneal or subcutaneous ISP has been widely used in preclinical studies to induce cardiac remodeling manifested by fibrosis and hypertrophy.The induced oxidative stress with subsequent perturbations in cellular signaling cascades through triggering the release of free radicals is consid-ered the initiating mechanism of myocardial fibrosis.ISP is consistently used to induce fibrosis in laboratory animals and in cardiomyocytes isolated from animals.In recent years,numerous phytochemicals and synthetic molecules have been evaluated in ISP-induced cardiac fibrosis.The present review exclusively provides a comprehensive summary of the pathological biochemical,histological,and molecular mechanisms of ISP in inducing cardiac fibrosis and hypertrophy.It also summarizes the application of this experimental model in the therapeutic evaluation of natural as well as syn-thetic compounds to demonstrate their potential in mitigating myocardial fibrosis and hypertrophy.展开更多
In the scenario of a steam generator tube rupture accident in a lead-cooled fast reactor,secondary circuit subcooled water under high pressure is injected into an ordinary-pressure primary vessel,where a molten lead-b...In the scenario of a steam generator tube rupture accident in a lead-cooled fast reactor,secondary circuit subcooled water under high pressure is injected into an ordinary-pressure primary vessel,where a molten lead-based alloy(typically pure lead or lead-bismuth eutectic(LBE))is used as the coolant.To clarify the pressure build-up characteristics under water-jet injection,this study conducted several experiments by injecting pressurized water into a molten LBE pool at Sun Yat-sen University.To obtain a further understanding,several new experimental parameters were adopted,including the melt temperature,water subcooling,injection pressure,injection duration,and nozzle diameter.Through detailed analyses,it was found that the pressure and temperature during the water-melt interaction exhibited a consistent variation trend with our previous water-droplet injection mode LBE experiment.Similarly,the existence of a steam explosion was confirmed,which typically results in a much stronger pressure build-up.For the non-explosion cases,increasing the injection pressure,melt-pool temperature,nozzle diameter,and water subcooling promoted pressure build-up in the melt pool.However,a limited enhancement effect was observed when increasing the injection duration,which may be owing to the continually rising pressure in the interaction vessel or the isolation effect of the generated steam cavity.Regardless of whether a steam explosion occurred,the calculated mechanical and kinetic energy conversion efficiencies of the melt were relatively small(not exceeding 4.1%and 0.7%,respectively).Moreover,the range of the conversion efficiency was similar to that of previous water-droplet experiments,although the upper limit of the jet mode was slightly lower.展开更多
Neuromyelitis optica spectrum disorders are neuroinflammatory demyelinating disorders that lead to permanent visual loss and motor dysfunction.To date,no effective treatment exists as the exact causative mechanism rem...Neuromyelitis optica spectrum disorders are neuroinflammatory demyelinating disorders that lead to permanent visual loss and motor dysfunction.To date,no effective treatment exists as the exact causative mechanism remains unknown.Therefore,experimental models of neuromyelitis optica spectrum disorders are essential for exploring its pathogenesis and in screening for therapeutic targets.Since most patients with neuromyelitis optica spectrum disorders are seropositive for IgG autoantibodies against aquaporin-4,which is highly expressed on the membrane of astrocyte endfeet,most current experimental models are based on aquaporin-4-IgG that initially targets astrocytes.These experimental models have successfully simulated many pathological features of neuromyelitis optica spectrum disorders,such as aquaporin-4 loss,astrocytopathy,granulocyte and macrophage infiltration,complement activation,demyelination,and neuronal loss;however,they do not fully capture the pathological process of human neuromyelitis optica spectrum disorders.In this review,we summarize the currently known pathogenic mechanisms and the development of associated experimental models in vitro,ex vivo,and in vivo for neuromyelitis optica spectrum disorders,suggest potential pathogenic mechanisms for further investigation,and provide guidance on experimental model choices.In addition,this review summarizes the latest information on pathologies and therapies for neuromyelitis optica spectrum disorders based on experimental models of aquaporin-4-IgG-seropositive neuromyelitis optica spectrum disorders,offering further therapeutic targets and a theoretical basis for clinical trials.展开更多
Based on simplified calculations of one-dimensional wave systems,loading pressure platform curves of Al-Cu gradient materials(GMs)impactor were designed.The Al-Cu GMs were prepared using tape-pressing sintering,and th...Based on simplified calculations of one-dimensional wave systems,loading pressure platform curves of Al-Cu gradient materials(GMs)impactor were designed.The Al-Cu GMs were prepared using tape-pressing sintering,and their acoustic properties were characterized to match the design path.The parallelism of the Al-Cu GM was confirmed using a three-dimensional surface profilometry machine.A one-stage light-gas gun was used to launch the Al-Cu GM,impacting an Al-LiF target at a velocity of 400 m/s.The results of the experimental strain rate demonstrate that the Al-Cu GMs can realize the precise control of the strain rate within the range of 10^(4)‒10^(5)/s in the high-speed impact experiments.展开更多
This study aimed to investigate the moment redistribution in continuous glass fiber reinforced polymer(GFRP)-concrete composite slabs caused by concrete cracking and steel bar yielding in the negative bending moment z...This study aimed to investigate the moment redistribution in continuous glass fiber reinforced polymer(GFRP)-concrete composite slabs caused by concrete cracking and steel bar yielding in the negative bending moment zone.An experimental bending moment redistribution test was conducted on continuous GFRP-concrete composite slabs,and a calculation method based on the conjugate beam method was proposed.The composite slabs were formed by combining GFRP profiles with a concrete layer and supported on steel beams to create two-span continuous composite slab specimens.Two methods,epoxy resin bonding,and stud connection,were used to connect the composite slabs with the steel beams.The experimental findings showed that the specimen connected with epoxy resin exhibited two moments redistribution phenomena during the loading process:concrete cracking and steel bar yielding at the internal support.In contrast,the composite slab connected with steel beams by studs exhibited only one-moment redistribution phenomenon throughout the loading process.As the concrete at the internal support cracked,the bending moment decreased in the internal support section and increased in the midspan section.When the steel bars yielded,the bending moment further decreased in the internal support section and increased in the mid-span section.Since GFRP profiles do not experience cracking,there was no significant decrease in the bending moment of the mid-span section.All test specimens experienced compressive failure of concrete at the mid-span section.Calculation results showed good agreement between the calculated and experimental values of bending moments in the mid-span section and internal support section.The proposed model can effectively predict the moment redistribution behavior of continuous GFRP-concrete composite slabs.展开更多
In this work,the selected icebreaker model experiment is performed in a towing tank.We focus on the influence of seawater salinity on ship ice resistance in the ice floe field and the innovative ice model and ship mod...In this work,the selected icebreaker model experiment is performed in a towing tank.We focus on the influence of seawater salinity on ship ice resistance in the ice floe field and the innovative ice model and ship model test technology,including the similitude rule of ship model tests,test principles,and validation with full-scale ship data.A formula for calculating the relationship between the temperature and salinity of the water is constructed,which can be used to simulate the role of seawater in freshwater ice pools.On this basis,the effect of salinity on the resistance of ships sailing in broken ice fields is studied.A technique in which artificial ice made of polyethylene spheres is used to simulate ice resistance is proposed.With a series of ship model experiments in spherical and triangular ice fields,the effects of salinity and velocity on the ice resistance test of the ship model are analyzed.A relationship of the ice resistance of the ship model to the spherical ice field and the triangular ice field is proposed.The conversion results are consistent with onsite data of the full-size ship,which verifies the method of converting the test results of the ship model to the prototype.展开更多
High-pressure and high-temperature(HPHT)experiments in large-volume presses(LVPs)benefit from reliable,available,and affordable heaters to achieve stable and homogeneous heating and,in some circumstances,X-ray transpa...High-pressure and high-temperature(HPHT)experiments in large-volume presses(LVPs)benefit from reliable,available,and affordable heaters to achieve stable and homogeneous heating and,in some circumstances,X-ray transparency for monitoring of properties of an in situ experiment using X-ray diffraction and contrast imaging techniques.We have developed heaters meeting the above requirements,and we screen the ternary system TiB2–SiC–hexagonal(h)BN(denoted as TSB)to enable manufacture of X-ray transparent heaters for HPHT runs.Heaters fabricated using optimized TSB-631(60%TiB2–30%SiC–10%hBN by weight)have been tested in modified truncated assemblies,showing excellent performance up to 22 GPa and 2395 K in HPHT runs.TSB-631 has good ceramic machinability,outstanding reproducibility,high stability,and negligible temperature gradient for runs at 3–7 GPa with cell assemblies with truncated edge lengths of 8–12 mm.The fabricated heaters not only show excellent performance in HPHT runs,but also demonstrate high X-ray transparency over a wide X-ray wavelength region,indicating potential applications for in situ X-ray diffraction/imaging under HPHT conditions in LVPs and other high-pressure apparatus.展开更多
The integration of artificial intelligence (AI) with high-throughput experimentation (HTE) techniques is revolutionizing catalyst design, addressing challenges in efficiency, cost, and scalability. This review explore...The integration of artificial intelligence (AI) with high-throughput experimentation (HTE) techniques is revolutionizing catalyst design, addressing challenges in efficiency, cost, and scalability. This review explores the synergistic application of AI and HTE, highlighting their role in accelerating catalyst discovery, optimizing reaction parameters, and understanding structure-performance relationships. HTE facilitates the rapid preparation, characterization, and evaluation of diverse catalyst formulations, generating large datasets essential for AI model training. Machine learning algorithms, including regression models, neural networks, and active learning frameworks, analyze these datasets to uncover the underlying relationships between the data, predict performance, and optimize experimental workflows in real-time. Case studies across heterogeneous, homogeneous, and electrocatalysis demonstrate significant advancements, including improved reaction selectivity, enhanced material stability, and shorten discovery cycles. The integration of AI with HTE has significantly accelerated discovery cycles, enabling the optimization of catalyst formulations and reaction conditions. Despite these achievements, challenges remain, including reliance on researcher expertise, real-time adaptability, and the complexity of large-scale data analysis. Addressing these limitations through refined experimental protocols, standardized datasets, and interpretable AI models will unlock the full potential of AI-HTE integration.展开更多
The solid electrolyte interphase(SEI)layer,formed on the electrode through electrolyte decomposition,has garnered significant attention over the past several decades.Numerous characterization studies have shown that t...The solid electrolyte interphase(SEI)layer,formed on the electrode through electrolyte decomposition,has garnered significant attention over the past several decades.Numerous characterization studies have shown that the SEI enhances the stability of both the electrolyte and electrode,particularly by mitigating the well-known cation-solvent co-intercalation in graphite electrodes in lithium-ion batteries.However,recent electrolyte exchange experiments have revealed that variations in electrolyte solvation structure and the resulting desolvation behaviors play a more dominant role than the SEI in influencing electrolyte and electrode stability,which in turn critically impacts battery performance.In addition to contributing to the ongoing debate,electrolyte exchange experiments have proven to be a valuable tool for analyzing failures in electrolytes,electrodes,and batteries.This review highlights the application of electrolyte exchange experiments across various metal-ion batteries,incorporating diverse combinations of electrolytes and electrodes.It examines the influence of electrolyte solvation structures and desolvation behaviors on the stability of both electrolytes and electrodes.The aim is to enhance the methodology of electrolyte exchange experiments to deepen the understanding of the molecular interactions among metal ions,anions,and solvents within the electrolyte.This approach complements existing insights into SEI effects,providing a more thorough and accurate framework for battery failure analysis.展开更多
Correction:J Cotton Res 8,27(2025)https://doi.org/10.1186/s42397-025-00228-y During the publication process of the original article(Soltani Toularoud et al.2025),the article title has been wrongly captured.Te article ...Correction:J Cotton Res 8,27(2025)https://doi.org/10.1186/s42397-025-00228-y During the publication process of the original article(Soltani Toularoud et al.2025),the article title has been wrongly captured.Te article title should be corrected from:of butisanstar and clopyralid herbicides on Gos-sypium hirsutum L.growth:insights from a pot experiment to:Residual efects of butisanstar and clopyralid herbi-cides on Gossypium hirsutum L.growth:insights from a pot experiment Te original article(Soltani Toularoud et al.2025)has been updated.Te publisher apologizes to the authors and readers for the inconvenience caused.展开更多
Cavitation is an unavoidable phenomenon in the operation of centrifugal pumps.Prolonged cavitation can cause significant damage to the components of the flow channel,and in severe cases,it may even interfere with the ...Cavitation is an unavoidable phenomenon in the operation of centrifugal pumps.Prolonged cavitation can cause significant damage to the components of the flow channel,and in severe cases,it may even interfere with the normal energy exchange processes within the pump.Therefore,effective monitoring of cavitation in centrifugal pumps is crucial.This article presents a study that approaches the issue from an acoustic perspective,using experimental methods to gather and analyze acoustic data at the inlet and outlet of centrifugal pumps across various flow rates,with hydrophones as the primary measuring instruments.Results show that flow rate significantly affects noise levels in both non-cavitation and mild cavitation stages,with noise increasing as the flow rate rises.As the cavitation margin(NPSHa)decreases,inlet and outlet noise trends diverge:inlet noise drops sharply,while outlet noise initially increases before sharply decreasing.Both exhibit a distinct zone of abrupt change,where NPSHa values offer earlier cavitation detection than traditional methods.The noise at the pump’s inlet and outlet primarily consists of discrete and broadband noise,with most energy concentrated at discrete frequencies—shaft frequency(24 Hz),blade frequency(144 Hz),and their harmonics.As NPSHa decreases,the inlet’s discrete and broadband noise frequencies decline,while they increase at the outlet.Monitoring changes in these spectrum characteristics provides an additional means of predicting cavitation onset.展开更多
Evolutionary experiments provide a unique lens through which to observe the impacts of natural selection on crop evolution,domestication,and adaptation through empirical evidence.Enabled by modern technologies—such a...Evolutionary experiments provide a unique lens through which to observe the impacts of natural selection on crop evolution,domestication,and adaptation through empirical evidence.Enabled by modern technologies—such as the development of large-scale,structured evolving populations,high-throughput phenotyping,and genomics-driven genetics studies—the transition from theoretical evolutionary biology to practical application is now possible for staple crops.The century-long Barley Composite Cross II(CCII)competition experiment has offered invaluable insights into understanding the genomic and phenotypic basis of natural and artificial selection driven by environmental adaptation during crop evolution and domestication.These experiments enable scientists to measure evolutionary dynamics,in real time,of genetic diversity,adaptation of fitness-associated traits,and the trade-offs inherent in selective processes.Beyond advancing our understanding of evolutionary biology and agricultural practices,these studies provide critical insights into addressing global challenges,from ensuring food security to fostering resilience in human societies.展开更多
This study investigates the vibration characteristics of bolted-flange-joined conical-cylindrical shells(BFJCCSs)through both theoretical analysis and experimental testing.The proposed model incorporates the pressure ...This study investigates the vibration characteristics of bolted-flange-joined conical-cylindrical shells(BFJCCSs)through both theoretical analysis and experimental testing.The proposed model incorporates the pressure distribution within the bolted joint and accounts for the flange effect.The energy expressions for the conical and cylindrical shells are derived from Donnell's shell theory,while those for the flanges are obtained from the Euler-Bernoulli beam theory.The Lagrange equation is used to derive the dynamic equation,and the experimental studies on the BFJCCS are conducted to validate the accuracy of the model.Subsequently,the comprehensive effects of bolt loosening and bolt number on the frequency parameters are analyzed.Additionally,the effects of the flange dimensions and cone angle on the vibration behavior of the BFJCCS are discussed.In particular,the dynamic differences between the welded conical-cylindrical shell(WCCS)and BFJCCS are investigated.It is found that compared with the WCCS,the fundamental frequency of the BFJCCS is reduced by 7.6%,and the corresponding modal damping ratio is reduced by 21.0%.However,the high-order frequencies of the BFJCCS are higher than those of the WCCS,accompanied by a higher modal damping ratio.Compared with the bolt loosening degree,the bolt number has a more significant effect on frequencies.As the bolt number decreases,the impact of the bolt loosening degree diminishes gradually.展开更多
Renewable energy storage technologies are critical for transitioning to sustainable energy systems,with salt caverns playing a significant role in large-scale solutions.In water-soluble mining of low-grade salt format...Renewable energy storage technologies are critical for transitioning to sustainable energy systems,with salt caverns playing a significant role in large-scale solutions.In water-soluble mining of low-grade salt formations,insoluble impurities and interlayers detach during salt dissolution and accumulate as sediment at the cavern base,thereby reducing the storage capacity and economic viability of salt cavern gas storage(SCGS).This study investigates sediment formation mechanisms,void distribution,and voidage in the Huai'an low-grade salt mine,introducing a novel self-developed physical simulation device for two butted-well horizontal(TWH)caverns that replicates compressed air injection and brine discharge.Experiments comparing“one injection and one discharge”and“two injections and one discharge”modes revealed that(1)compressed air effectively displaces brine from sediment voids,(2)a 0.5 MPa injection pressure corresponds to a 10.3 MPa operational lower limit in practice,aligning with field data,and(3)sediment voidage is approximately 46%,validated via air-brine interface theory.The“two injections and one discharge”mode outperformed in both discharge volume and rate.Additionally,a mathematical model for brine displacement via compressed air was established.These results provide foundational insights for optimizing compressed air energy storage(CAES)in low-grade salt mines,advancing their role in renewable energy integration.展开更多
Founded in 2009,the China Dark Matter Experiment(CDEX)collaboration was dedicated to the detection of dark matter(DM)and neutrinoless double beta decay using high-purity germanium(HPGe)detectors in the China Jinping U...Founded in 2009,the China Dark Matter Experiment(CDEX)collaboration was dedicated to the detection of dark matter(DM)and neutrinoless double beta decay using high-purity germanium(HPGe)detectors in the China Jinping Underground Laboratory.HPGe detectors are characterized by a high energy resolution,low analysis threshold,and low radioactive background,making them an ideal platform for the direct detection of DM.Over the years,CDEX has accumulated a massive amount of experimental data,based on which various results on DM detection and neutrinoless double beta decay have been presented.Because the dataset was collected in a low-background environment,apart from the analysis of DM-related physical channels,it has great potential as an indicator in other rare physical events searches.Furthermore,by providing raw pulse shapes,the dataset can serve as a tool for effectively understanding the internal mechanisms of HPGe detectors.展开更多
With the increasing development of deepburied engineering projects,rockburst disasters have become a frequent concern.Studies have indicated that tunnel diameter is a critical factor influencing the occurrence of rock...With the increasing development of deepburied engineering projects,rockburst disasters have become a frequent concern.Studies have indicated that tunnel diameter is a critical factor influencing the occurrence of rockbursts.To investigate the influence of tunnel diameter on the deformation and failure characteristics of surrounding rock,large-sized rocklike gypsum specimens were tested using a selfdeveloped true triaxial rockburst loading system containing circular tunnels with three different diameters(D=0.07 m,0.11 m,and 0.15 m).Acoustic emission monitoring,together with a miniature intelligent camera,was employed to analyze the entire process,focusing on macroscopic failure patterns,fragment characteristics,and underlying failure mechanisms.In addition,theoretical analyses were carried out and combined with numerical simulations to investigate the differences in energy evolution associated with rockburst physical models.The results indicate that:(1)The rockburst process with different tunnel diameters consistently evolved through three distinct stages—initial particle ejection,crack propagation accompanied by flake spalling,and,finally,fragment ejection leading to the formation of a‘V'-shaped notch.(2)Increasing tunnel diameter reduces rockburst failure load while increasing surrounding rock damage extent,total mass and average size of ejected fragments.Additionally,shear failure proportion decreases with tensile failure becoming increasingly dominant.(3)Larger tunnel diameters reduce the attenuation rate of elastic strain energy,thereby expanding the zone of elastic strain energy accumulation and disturbance and creating conditions for larger volume rockburst.(4)Larger tunnel diameters result in a smaller principal stress ratio at equivalent distances in the surrounding rock,indicating a higher likelihood of tensile failure.(5)Numerical analyses further reveal that larger tunnel diameters reduce the maximum elastic strain energy density around the tunnel,lowering the energy released per unit volume of rockburst fragments and their ejection velocities.However,both the total failure volume and overall energy release from rockburst increase.Model experiments with different tunnel diameters are of great significance for optimizing engineering design and parameter selection,as well as guiding tunnel construction under complex geological conditions.展开更多
A cased well model consists of a coaxial tank and casing,which houses coaxially installed transmitting and receiving coils.The transmitting coil is excited by the current produced by the transmitting circuit,and trans...A cased well model consists of a coaxial tank and casing,which houses coaxially installed transmitting and receiving coils.The transmitting coil is excited by the current produced by the transmitting circuit,and transient electromagnetic responses occur in the casing,including direct coupling and casing responses.As the range between the transmitting and receiving coils increases,direct coupling responses decay rapidly,are less than the casing response at 0.3 m,and disappear at 0.7 m.By contrast,a casing response increases rapidly and then declines slowly after reaching a peak and changes little within a specifi c range.The peak decreases slowly with range.The continuous addition of water to the tank causes slight changes in transient electromagnetic responses,so the diff erence which are subtracted from the response without water is used.Moreover,the diff erences at the time of rapid increase in response and the time of rapid decrease in response are large,forming a peak and a trough.Given that the conductivity of water in a full tank changes after the addition of salt,the diff erence in the peak is linear with the increase in the conductivity of water.This result provides an experimental basis for the design of a transient electromagnetic logging instrument that measures the conductivity of formation in cased well.展开更多
A spice formulation study in Burkina Faso was carried out using local ingredients for the benefit of households. The objective of this study was to propose some spice formulations based on local ingredients in order t...A spice formulation study in Burkina Faso was carried out using local ingredients for the benefit of households. The objective of this study was to propose some spice formulations based on local ingredients in order to reduce the use of chemical spices in the preparation of different dishes. The Design of Experiments (DOE) methodology was used for the formulation of the spices and their physicochemical, nutritional and sensory characteristics were evaluated by standardized and standard methods. The results obtained showed lipid contents (g/100 g DM) ranging from 10.41 ± 0.26 to 15.64 ± 0.68, total sugars from 4.39 ± 0.32 to 5.46 ± 0.31, protein from 3.65 ± 0.17 to 12.04 ± 0.35 and ash from 5.83 ± 0.01 to 7.02 ± 0.01. The polyphenol content ranged from 9.09 ± 1.60 to 11.33 ± 0.90, and the flavonoid content ranged from 0.65 ± 0.03 to 1.08 ± 0.13. The sensory analysis carried out showed that the spices have generally satisfactory organoleptic characteristics. These results constitute new information in the diet of populations and are an alternative to the chemical spices used in their cooking.展开更多
In the development framework of engineering colleges,the cultivation of students’practical ability has received unprecedented attention.Based on the actual situation of the experimental teaching of the bridge directi...In the development framework of engineering colleges,the cultivation of students’practical ability has received unprecedented attention.Based on the actual situation of the experimental teaching of the bridge direction of the road and bridge specialty in our school,the targeted teaching experiment reform was carried out,and the comprehensive experiment of the positioning of the crack observation grade steel bar of the reinforced concrete beam was customized,so that the students were fully trained in the application of professional software,experimental hands-on skills,information data analysis and processing,and bridge detection ability.It broadens students’practical ability and professional vision,and lays a good foundation for future work and employment.展开更多
Liquid-fueled molten-salt reactors have dynamic features that distinguish them from solid-fueled reactors,such that conventional system-analysis codes are not directly applicable.In this study,a coupled dynamic model ...Liquid-fueled molten-salt reactors have dynamic features that distinguish them from solid-fueled reactors,such that conventional system-analysis codes are not directly applicable.In this study,a coupled dynamic model of the Molten-Salt Reactor Experiment(MSRE)is developed.The coupled model includes the neutronics and single-phase thermal-hydraulics modeling of the reactor and validated xenon-transport modeling from previous studies.The coupled dynamic model is validated against the frequency-response and transient-response data from the MSRE.The validated model is then applied to study the effects of xenon and void transport on the dynamic behaviors of the reactor.Plant responses during the unique initiating events such as off-gas system blockages and loss of circulating voids are investigated.展开更多
基金United Arab Emirates University,Grant/Award Number:12R104 and 12R121。
文摘Cardiac injury initiates repair mechanisms and results in cardiac remodeling and fi-brosis,which appears to be a leading cause of cardiovascular diseases.Cardiac fi-brosis is characterized by the accumulation of extracellular matrix proteins,mainly collagen in the cardiac interstitium.Many experimental studies have demonstrated that fibrotic injury in the heart is reversible;therefore,it is vital to understand differ-ent molecular mechanisms that are involved in the initiation,progression,and resolu-tion of cardiac fibrosis to enable the development of antifibrotic agents.Of the many experimental models,one of the recent models that has gained renewed interest is isoproterenol(ISP)-induced cardiac fibrosis.ISP is a synthetic catecholamine,sympa-thomimetic,and nonselectiveβ-adrenergic receptor agonist.The overstimulated and sustained activation ofβ-adrenergic receptors has been reported to induce biochemi-cal and physiological alterations and ultimately result in cardiac remodeling.ISP has been used for decades to induce acute myocardial infarction.However,the use of low doses and chronic administration of ISP have been shown to induce cardiac fibrosis;this practice has increased in recent years.Intraperitoneal or subcutaneous ISP has been widely used in preclinical studies to induce cardiac remodeling manifested by fibrosis and hypertrophy.The induced oxidative stress with subsequent perturbations in cellular signaling cascades through triggering the release of free radicals is consid-ered the initiating mechanism of myocardial fibrosis.ISP is consistently used to induce fibrosis in laboratory animals and in cardiomyocytes isolated from animals.In recent years,numerous phytochemicals and synthetic molecules have been evaluated in ISP-induced cardiac fibrosis.The present review exclusively provides a comprehensive summary of the pathological biochemical,histological,and molecular mechanisms of ISP in inducing cardiac fibrosis and hypertrophy.It also summarizes the application of this experimental model in the therapeutic evaluation of natural as well as syn-thetic compounds to demonstrate their potential in mitigating myocardial fibrosis and hypertrophy.
基金supported by Basic and Applied Basic research foundation of Guangdong province(Nos.2021A1515010343 and 2022A1515011582)the Science and Technology Program of Guangdong Province(Nos.2021A0505030026 and 2022A0505050029).
文摘In the scenario of a steam generator tube rupture accident in a lead-cooled fast reactor,secondary circuit subcooled water under high pressure is injected into an ordinary-pressure primary vessel,where a molten lead-based alloy(typically pure lead or lead-bismuth eutectic(LBE))is used as the coolant.To clarify the pressure build-up characteristics under water-jet injection,this study conducted several experiments by injecting pressurized water into a molten LBE pool at Sun Yat-sen University.To obtain a further understanding,several new experimental parameters were adopted,including the melt temperature,water subcooling,injection pressure,injection duration,and nozzle diameter.Through detailed analyses,it was found that the pressure and temperature during the water-melt interaction exhibited a consistent variation trend with our previous water-droplet injection mode LBE experiment.Similarly,the existence of a steam explosion was confirmed,which typically results in a much stronger pressure build-up.For the non-explosion cases,increasing the injection pressure,melt-pool temperature,nozzle diameter,and water subcooling promoted pressure build-up in the melt pool.However,a limited enhancement effect was observed when increasing the injection duration,which may be owing to the continually rising pressure in the interaction vessel or the isolation effect of the generated steam cavity.Regardless of whether a steam explosion occurred,the calculated mechanical and kinetic energy conversion efficiencies of the melt were relatively small(not exceeding 4.1%and 0.7%,respectively).Moreover,the range of the conversion efficiency was similar to that of previous water-droplet experiments,although the upper limit of the jet mode was slightly lower.
文摘Neuromyelitis optica spectrum disorders are neuroinflammatory demyelinating disorders that lead to permanent visual loss and motor dysfunction.To date,no effective treatment exists as the exact causative mechanism remains unknown.Therefore,experimental models of neuromyelitis optica spectrum disorders are essential for exploring its pathogenesis and in screening for therapeutic targets.Since most patients with neuromyelitis optica spectrum disorders are seropositive for IgG autoantibodies against aquaporin-4,which is highly expressed on the membrane of astrocyte endfeet,most current experimental models are based on aquaporin-4-IgG that initially targets astrocytes.These experimental models have successfully simulated many pathological features of neuromyelitis optica spectrum disorders,such as aquaporin-4 loss,astrocytopathy,granulocyte and macrophage infiltration,complement activation,demyelination,and neuronal loss;however,they do not fully capture the pathological process of human neuromyelitis optica spectrum disorders.In this review,we summarize the currently known pathogenic mechanisms and the development of associated experimental models in vitro,ex vivo,and in vivo for neuromyelitis optica spectrum disorders,suggest potential pathogenic mechanisms for further investigation,and provide guidance on experimental model choices.In addition,this review summarizes the latest information on pathologies and therapies for neuromyelitis optica spectrum disorders based on experimental models of aquaporin-4-IgG-seropositive neuromyelitis optica spectrum disorders,offering further therapeutic targets and a theoretical basis for clinical trials.
基金Natural Science Foundation of Hubei Province(2024AFB432)National Natural Science Foundation of China(52171045,12302436,52302095)Research Fund of Jianghan University(2023JCYJ05)。
文摘Based on simplified calculations of one-dimensional wave systems,loading pressure platform curves of Al-Cu gradient materials(GMs)impactor were designed.The Al-Cu GMs were prepared using tape-pressing sintering,and their acoustic properties were characterized to match the design path.The parallelism of the Al-Cu GM was confirmed using a three-dimensional surface profilometry machine.A one-stage light-gas gun was used to launch the Al-Cu GM,impacting an Al-LiF target at a velocity of 400 m/s.The results of the experimental strain rate demonstrate that the Al-Cu GMs can realize the precise control of the strain rate within the range of 10^(4)‒10^(5)/s in the high-speed impact experiments.
基金supported by National Natural Science Foundation of China(Project No.51878156,received by Wen-Wei Wang) and EPC Innovation Consulting Project for Longkou Nanshan LNG Phase I Receiving Terminal(Z2000LGENT0399,received by Wen-Wei Wang and ZhaoJun Zhang).
文摘This study aimed to investigate the moment redistribution in continuous glass fiber reinforced polymer(GFRP)-concrete composite slabs caused by concrete cracking and steel bar yielding in the negative bending moment zone.An experimental bending moment redistribution test was conducted on continuous GFRP-concrete composite slabs,and a calculation method based on the conjugate beam method was proposed.The composite slabs were formed by combining GFRP profiles with a concrete layer and supported on steel beams to create two-span continuous composite slab specimens.Two methods,epoxy resin bonding,and stud connection,were used to connect the composite slabs with the steel beams.The experimental findings showed that the specimen connected with epoxy resin exhibited two moments redistribution phenomena during the loading process:concrete cracking and steel bar yielding at the internal support.In contrast,the composite slab connected with steel beams by studs exhibited only one-moment redistribution phenomenon throughout the loading process.As the concrete at the internal support cracked,the bending moment decreased in the internal support section and increased in the midspan section.When the steel bars yielded,the bending moment further decreased in the internal support section and increased in the mid-span section.Since GFRP profiles do not experience cracking,there was no significant decrease in the bending moment of the mid-span section.All test specimens experienced compressive failure of concrete at the mid-span section.Calculation results showed good agreement between the calculated and experimental values of bending moments in the mid-span section and internal support section.The proposed model can effectively predict the moment redistribution behavior of continuous GFRP-concrete composite slabs.
基金financially supported by Jiangsu Province University(High Tech Ship)Collaborative Innovation Center(Grant No.XTCXKY20230008).
文摘In this work,the selected icebreaker model experiment is performed in a towing tank.We focus on the influence of seawater salinity on ship ice resistance in the ice floe field and the innovative ice model and ship model test technology,including the similitude rule of ship model tests,test principles,and validation with full-scale ship data.A formula for calculating the relationship between the temperature and salinity of the water is constructed,which can be used to simulate the role of seawater in freshwater ice pools.On this basis,the effect of salinity on the resistance of ships sailing in broken ice fields is studied.A technique in which artificial ice made of polyethylene spheres is used to simulate ice resistance is proposed.With a series of ship model experiments in spherical and triangular ice fields,the effects of salinity and velocity on the ice resistance test of the ship model are analyzed.A relationship of the ice resistance of the ship model to the spherical ice field and the triangular ice field is proposed.The conversion results are consistent with onsite data of the full-size ship,which verifies the method of converting the test results of the ship model to the prototype.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.22090041 and 22401297)the Guangdong Basic and Applied Basic Research Foundation(Grant No.2022B1515120014).
文摘High-pressure and high-temperature(HPHT)experiments in large-volume presses(LVPs)benefit from reliable,available,and affordable heaters to achieve stable and homogeneous heating and,in some circumstances,X-ray transparency for monitoring of properties of an in situ experiment using X-ray diffraction and contrast imaging techniques.We have developed heaters meeting the above requirements,and we screen the ternary system TiB2–SiC–hexagonal(h)BN(denoted as TSB)to enable manufacture of X-ray transparent heaters for HPHT runs.Heaters fabricated using optimized TSB-631(60%TiB2–30%SiC–10%hBN by weight)have been tested in modified truncated assemblies,showing excellent performance up to 22 GPa and 2395 K in HPHT runs.TSB-631 has good ceramic machinability,outstanding reproducibility,high stability,and negligible temperature gradient for runs at 3–7 GPa with cell assemblies with truncated edge lengths of 8–12 mm.The fabricated heaters not only show excellent performance in HPHT runs,but also demonstrate high X-ray transparency over a wide X-ray wavelength region,indicating potential applications for in situ X-ray diffraction/imaging under HPHT conditions in LVPs and other high-pressure apparatus.
基金supported by the Special Project of National Natural Science Foundation(42341204)the the National Natural Science Foundation of China(W2411009).
文摘The integration of artificial intelligence (AI) with high-throughput experimentation (HTE) techniques is revolutionizing catalyst design, addressing challenges in efficiency, cost, and scalability. This review explores the synergistic application of AI and HTE, highlighting their role in accelerating catalyst discovery, optimizing reaction parameters, and understanding structure-performance relationships. HTE facilitates the rapid preparation, characterization, and evaluation of diverse catalyst formulations, generating large datasets essential for AI model training. Machine learning algorithms, including regression models, neural networks, and active learning frameworks, analyze these datasets to uncover the underlying relationships between the data, predict performance, and optimize experimental workflows in real-time. Case studies across heterogeneous, homogeneous, and electrocatalysis demonstrate significant advancements, including improved reaction selectivity, enhanced material stability, and shorten discovery cycles. The integration of AI with HTE has significantly accelerated discovery cycles, enabling the optimization of catalyst formulations and reaction conditions. Despite these achievements, challenges remain, including reliance on researcher expertise, real-time adaptability, and the complexity of large-scale data analysis. Addressing these limitations through refined experimental protocols, standardized datasets, and interpretable AI models will unlock the full potential of AI-HTE integration.
基金supported by the Jilin Provincial Scientific and Technological Development Program(YDZJ202401572ZYTS)the Overseas Expertise Introduction Project for Discipline Innovation of China(D18012)+1 种基金Education Department of Jilin Province(JJKH20240678KJ)the National Natural Science Foundation of China(22122904,22109155,22379136)。
文摘The solid electrolyte interphase(SEI)layer,formed on the electrode through electrolyte decomposition,has garnered significant attention over the past several decades.Numerous characterization studies have shown that the SEI enhances the stability of both the electrolyte and electrode,particularly by mitigating the well-known cation-solvent co-intercalation in graphite electrodes in lithium-ion batteries.However,recent electrolyte exchange experiments have revealed that variations in electrolyte solvation structure and the resulting desolvation behaviors play a more dominant role than the SEI in influencing electrolyte and electrode stability,which in turn critically impacts battery performance.In addition to contributing to the ongoing debate,electrolyte exchange experiments have proven to be a valuable tool for analyzing failures in electrolytes,electrodes,and batteries.This review highlights the application of electrolyte exchange experiments across various metal-ion batteries,incorporating diverse combinations of electrolytes and electrodes.It examines the influence of electrolyte solvation structures and desolvation behaviors on the stability of both electrolytes and electrodes.The aim is to enhance the methodology of electrolyte exchange experiments to deepen the understanding of the molecular interactions among metal ions,anions,and solvents within the electrolyte.This approach complements existing insights into SEI effects,providing a more thorough and accurate framework for battery failure analysis.
文摘Correction:J Cotton Res 8,27(2025)https://doi.org/10.1186/s42397-025-00228-y During the publication process of the original article(Soltani Toularoud et al.2025),the article title has been wrongly captured.Te article title should be corrected from:of butisanstar and clopyralid herbicides on Gos-sypium hirsutum L.growth:insights from a pot experiment to:Residual efects of butisanstar and clopyralid herbi-cides on Gossypium hirsutum L.growth:insights from a pot experiment Te original article(Soltani Toularoud et al.2025)has been updated.Te publisher apologizes to the authors and readers for the inconvenience caused.
基金supported by the National Natural Science Foundation of China(Research Project No.52169018).
文摘Cavitation is an unavoidable phenomenon in the operation of centrifugal pumps.Prolonged cavitation can cause significant damage to the components of the flow channel,and in severe cases,it may even interfere with the normal energy exchange processes within the pump.Therefore,effective monitoring of cavitation in centrifugal pumps is crucial.This article presents a study that approaches the issue from an acoustic perspective,using experimental methods to gather and analyze acoustic data at the inlet and outlet of centrifugal pumps across various flow rates,with hydrophones as the primary measuring instruments.Results show that flow rate significantly affects noise levels in both non-cavitation and mild cavitation stages,with noise increasing as the flow rate rises.As the cavitation margin(NPSHa)decreases,inlet and outlet noise trends diverge:inlet noise drops sharply,while outlet noise initially increases before sharply decreasing.Both exhibit a distinct zone of abrupt change,where NPSHa values offer earlier cavitation detection than traditional methods.The noise at the pump’s inlet and outlet primarily consists of discrete and broadband noise,with most energy concentrated at discrete frequencies—shaft frequency(24 Hz),blade frequency(144 Hz),and their harmonics.As NPSHa decreases,the inlet’s discrete and broadband noise frequencies decline,while they increase at the outlet.Monitoring changes in these spectrum characteristics provides an additional means of predicting cavitation onset.
基金supported by the National Key Research and Development Program of China(2023YFF1000100)the National Key R&D Program of China(grant number 2023YFA0914600)to SFC.
文摘Evolutionary experiments provide a unique lens through which to observe the impacts of natural selection on crop evolution,domestication,and adaptation through empirical evidence.Enabled by modern technologies—such as the development of large-scale,structured evolving populations,high-throughput phenotyping,and genomics-driven genetics studies—the transition from theoretical evolutionary biology to practical application is now possible for staple crops.The century-long Barley Composite Cross II(CCII)competition experiment has offered invaluable insights into understanding the genomic and phenotypic basis of natural and artificial selection driven by environmental adaptation during crop evolution and domestication.These experiments enable scientists to measure evolutionary dynamics,in real time,of genetic diversity,adaptation of fitness-associated traits,and the trade-offs inherent in selective processes.Beyond advancing our understanding of evolutionary biology and agricultural practices,these studies provide critical insights into addressing global challenges,from ensuring food security to fostering resilience in human societies.
基金supported by the National Natural Science Foundation of China(No.12272088)the Out-standing Youth Science Foundation of Liaoning Province of China(No.2024JH3/50100013)。
文摘This study investigates the vibration characteristics of bolted-flange-joined conical-cylindrical shells(BFJCCSs)through both theoretical analysis and experimental testing.The proposed model incorporates the pressure distribution within the bolted joint and accounts for the flange effect.The energy expressions for the conical and cylindrical shells are derived from Donnell's shell theory,while those for the flanges are obtained from the Euler-Bernoulli beam theory.The Lagrange equation is used to derive the dynamic equation,and the experimental studies on the BFJCCS are conducted to validate the accuracy of the model.Subsequently,the comprehensive effects of bolt loosening and bolt number on the frequency parameters are analyzed.Additionally,the effects of the flange dimensions and cone angle on the vibration behavior of the BFJCCS are discussed.In particular,the dynamic differences between the welded conical-cylindrical shell(WCCS)and BFJCCS are investigated.It is found that compared with the WCCS,the fundamental frequency of the BFJCCS is reduced by 7.6%,and the corresponding modal damping ratio is reduced by 21.0%.However,the high-order frequencies of the BFJCCS are higher than those of the WCCS,accompanied by a higher modal damping ratio.Compared with the bolt loosening degree,the bolt number has a more significant effect on frequencies.As the bolt number decreases,the impact of the bolt loosening degree diminishes gradually.
基金financial support from the National Key Research and Development Program of China(No.2024YFB4007100)the Basic ForwardLooking Project of the Sinopec Science and Technology Department,“Research on the Long-Term Sealing Mechanism of Multi-layer Salt Cavern Hydrogen Storage”(No.P24197-4)。
文摘Renewable energy storage technologies are critical for transitioning to sustainable energy systems,with salt caverns playing a significant role in large-scale solutions.In water-soluble mining of low-grade salt formations,insoluble impurities and interlayers detach during salt dissolution and accumulate as sediment at the cavern base,thereby reducing the storage capacity and economic viability of salt cavern gas storage(SCGS).This study investigates sediment formation mechanisms,void distribution,and voidage in the Huai'an low-grade salt mine,introducing a novel self-developed physical simulation device for two butted-well horizontal(TWH)caverns that replicates compressed air injection and brine discharge.Experiments comparing“one injection and one discharge”and“two injections and one discharge”modes revealed that(1)compressed air effectively displaces brine from sediment voids,(2)a 0.5 MPa injection pressure corresponds to a 10.3 MPa operational lower limit in practice,aligning with field data,and(3)sediment voidage is approximately 46%,validated via air-brine interface theory.The“two injections and one discharge”mode outperformed in both discharge volume and rate.Additionally,a mathematical model for brine displacement via compressed air was established.These results provide foundational insights for optimizing compressed air energy storage(CAES)in low-grade salt mines,advancing their role in renewable energy integration.
基金supported by the National Key Research and Development Program of China(Nos.2023YFA1607100 and 2022YFA1605000)the National Natural Science Foundation of China(No.12322511)。
文摘Founded in 2009,the China Dark Matter Experiment(CDEX)collaboration was dedicated to the detection of dark matter(DM)and neutrinoless double beta decay using high-purity germanium(HPGe)detectors in the China Jinping Underground Laboratory.HPGe detectors are characterized by a high energy resolution,low analysis threshold,and low radioactive background,making them an ideal platform for the direct detection of DM.Over the years,CDEX has accumulated a massive amount of experimental data,based on which various results on DM detection and neutrinoless double beta decay have been presented.Because the dataset was collected in a low-background environment,apart from the analysis of DM-related physical channels,it has great potential as an indicator in other rare physical events searches.Furthermore,by providing raw pulse shapes,the dataset can serve as a tool for effectively understanding the internal mechanisms of HPGe detectors.
基金funded by the National Natural Science Foundation of China(Nos.42077228,52174085)。
文摘With the increasing development of deepburied engineering projects,rockburst disasters have become a frequent concern.Studies have indicated that tunnel diameter is a critical factor influencing the occurrence of rockbursts.To investigate the influence of tunnel diameter on the deformation and failure characteristics of surrounding rock,large-sized rocklike gypsum specimens were tested using a selfdeveloped true triaxial rockburst loading system containing circular tunnels with three different diameters(D=0.07 m,0.11 m,and 0.15 m).Acoustic emission monitoring,together with a miniature intelligent camera,was employed to analyze the entire process,focusing on macroscopic failure patterns,fragment characteristics,and underlying failure mechanisms.In addition,theoretical analyses were carried out and combined with numerical simulations to investigate the differences in energy evolution associated with rockburst physical models.The results indicate that:(1)The rockburst process with different tunnel diameters consistently evolved through three distinct stages—initial particle ejection,crack propagation accompanied by flake spalling,and,finally,fragment ejection leading to the formation of a‘V'-shaped notch.(2)Increasing tunnel diameter reduces rockburst failure load while increasing surrounding rock damage extent,total mass and average size of ejected fragments.Additionally,shear failure proportion decreases with tensile failure becoming increasingly dominant.(3)Larger tunnel diameters reduce the attenuation rate of elastic strain energy,thereby expanding the zone of elastic strain energy accumulation and disturbance and creating conditions for larger volume rockburst.(4)Larger tunnel diameters result in a smaller principal stress ratio at equivalent distances in the surrounding rock,indicating a higher likelihood of tensile failure.(5)Numerical analyses further reveal that larger tunnel diameters reduce the maximum elastic strain energy density around the tunnel,lowering the energy released per unit volume of rockburst fragments and their ejection velocities.However,both the total failure volume and overall energy release from rockburst increase.Model experiments with different tunnel diameters are of great significance for optimizing engineering design and parameter selection,as well as guiding tunnel construction under complex geological conditions.
基金supported by the National Natural Science Foundation of China (grant nos. 42074137)。
文摘A cased well model consists of a coaxial tank and casing,which houses coaxially installed transmitting and receiving coils.The transmitting coil is excited by the current produced by the transmitting circuit,and transient electromagnetic responses occur in the casing,including direct coupling and casing responses.As the range between the transmitting and receiving coils increases,direct coupling responses decay rapidly,are less than the casing response at 0.3 m,and disappear at 0.7 m.By contrast,a casing response increases rapidly and then declines slowly after reaching a peak and changes little within a specifi c range.The peak decreases slowly with range.The continuous addition of water to the tank causes slight changes in transient electromagnetic responses,so the diff erence which are subtracted from the response without water is used.Moreover,the diff erences at the time of rapid increase in response and the time of rapid decrease in response are large,forming a peak and a trough.Given that the conductivity of water in a full tank changes after the addition of salt,the diff erence in the peak is linear with the increase in the conductivity of water.This result provides an experimental basis for the design of a transient electromagnetic logging instrument that measures the conductivity of formation in cased well.
文摘A spice formulation study in Burkina Faso was carried out using local ingredients for the benefit of households. The objective of this study was to propose some spice formulations based on local ingredients in order to reduce the use of chemical spices in the preparation of different dishes. The Design of Experiments (DOE) methodology was used for the formulation of the spices and their physicochemical, nutritional and sensory characteristics were evaluated by standardized and standard methods. The results obtained showed lipid contents (g/100 g DM) ranging from 10.41 ± 0.26 to 15.64 ± 0.68, total sugars from 4.39 ± 0.32 to 5.46 ± 0.31, protein from 3.65 ± 0.17 to 12.04 ± 0.35 and ash from 5.83 ± 0.01 to 7.02 ± 0.01. The polyphenol content ranged from 9.09 ± 1.60 to 11.33 ± 0.90, and the flavonoid content ranged from 0.65 ± 0.03 to 1.08 ± 0.13. The sensory analysis carried out showed that the spices have generally satisfactory organoleptic characteristics. These results constitute new information in the diet of populations and are an alternative to the chemical spices used in their cooking.
基金Experimental Teaching Reform Project of Liaoning University of Science and Technology,Experimental Teaching Reform of Concrete Member Crack Observation and Reinforcement Location(Project No.:SYJG202419)。
文摘In the development framework of engineering colleges,the cultivation of students’practical ability has received unprecedented attention.Based on the actual situation of the experimental teaching of the bridge direction of the road and bridge specialty in our school,the targeted teaching experiment reform was carried out,and the comprehensive experiment of the positioning of the crack observation grade steel bar of the reinforced concrete beam was customized,so that the students were fully trained in the application of professional software,experimental hands-on skills,information data analysis and processing,and bridge detection ability.It broadens students’practical ability and professional vision,and lays a good foundation for future work and employment.
基金partly supported by the University of Shanghai for Science and Technology(No.10-24-301-101)。
文摘Liquid-fueled molten-salt reactors have dynamic features that distinguish them from solid-fueled reactors,such that conventional system-analysis codes are not directly applicable.In this study,a coupled dynamic model of the Molten-Salt Reactor Experiment(MSRE)is developed.The coupled model includes the neutronics and single-phase thermal-hydraulics modeling of the reactor and validated xenon-transport modeling from previous studies.The coupled dynamic model is validated against the frequency-response and transient-response data from the MSRE.The validated model is then applied to study the effects of xenon and void transport on the dynamic behaviors of the reactor.Plant responses during the unique initiating events such as off-gas system blockages and loss of circulating voids are investigated.
