By adopting sodium silicate as a major material,SiO_2 nanoparticles (size in 8-15nm) water-dispersiod was prepared by ion exchanging.The effects of sodium silicate concentration,surface-modifying time,temperature and ...By adopting sodium silicate as a major material,SiO_2 nanoparticles (size in 8-15nm) water-dispersiod was prepared by ion exchanging.The effects of sodium silicate concentration,surface-modifying time,temperature and technological conditions on their diameter,size distribution and dispersion stability were also studied.The result show that,the hydrophilic lipophlic and hydrophilic-lipophilic SiO_(2) nanoparticles water-dispersoid can be prepared through different kinds of surface-modifiers and the optimum reaction conditions have been determined as follows:sodium silicate solution concentration:8w%;silicone dosage:3% of the total mass of nano SiO_(2) water-dispersoid;adding way and time of surface-modifier:continual dropping for 2h;surface-modifying temperature:60-70℃.展开更多
In order to study synergism of the mixed surfactants system with molecular exchanging energy (E), the Lennard-Jones formula has been firstly introduced to evaluate the E of the mixed system, CH3(CH2)nOSO 3 /CH3(CH2)nN...In order to study synergism of the mixed surfactants system with molecular exchanging energy (E), the Lennard-Jones formula has been firstly introduced to evaluate the E of the mixed system, CH3(CH2)nOSO 3 /CH3(CH2)nN+(CH3)3 directly from their molecular structure. The comparison of the calculated and the observed results showed that this method is practical.展开更多
Cold metal transfer with polarity⁃exchanging is a new integrated welding technology based on MIG.Due to the alternation of the positive and negative polarities of the wire,favorable control upon the deposition rate an...Cold metal transfer with polarity⁃exchanging is a new integrated welding technology based on MIG.Due to the alternation of the positive and negative polarities of the wire,favorable control upon the deposition rate and the welding shape coefficient was obtained in order to meet the desired joint design,and the related controlling principles and joint characteristics were reported.Droplet transfer physical behavior exhibited strong dependability on the studied welding parameters,such as welding voltage,welding current,wire feeding speed,and polarity⁃exchanging.This welding technology provides a new way for the welding of body⁃in⁃white(BIW)thin sheet with special demands.Moreover,the typical quality defects of MIG were greatly improved.Our study provides important technical information from the perspective of industrial application of MIG and sheds light on the higher application level of MIG in BIW welding.展开更多
Laser plays an important role in synthesizing nanometer material. A three-dimensional mathematical model is established in this paper when single pulsed millisecond laser shocks the surface of the metal target at a li...Laser plays an important role in synthesizing nanometer material. A three-dimensional mathematical model is established in this paper when single pulsed millisecond laser shocks the surface of the metal target at a liquid-solid interface. By changing laser power density and target size, the temperature field variation of the metal target is investigated. Results show that the generation process of nanoparticles includes heating, melting and boiloff.展开更多
At present, electricity price to grid of domestic power plants is priced by the national administration based on the policy of "one power plant with one electricity price to grid," which is difficult to real...At present, electricity price to grid of domestic power plants is priced by the national administration based on the policy of "one power plant with one electricity price to grid," which is difficult to realize real bidding for access to grid in practice in a short term. This paper presents one kind of power-exchanging transaction model among price-varied power plants, which will be beneficial to price-varied power plants without any loss of profits of them and guarantee state-owned assets profits in minimum loss with no promotion of average price limit by power plants. Under ideal conditions, the computation results showed the sufficiency and necessity of power-exchanging transaction and maximum similarity with the requirements of optimized resources disposition in economics. The presented model is shown to be full of practicability and has been used in some part of power market.展开更多
By using the binary anionic/cationic surfactants system CH3(CH2)nOSO_3/CH3(CH2)nN+(CH3)3 as an ex-ample, the molecular exchanging energy (ε) of adsorption on the surface monolayer of aqueous solu-tion has been studie...By using the binary anionic/cationic surfactants system CH3(CH2)nOSO_3/CH3(CH2)nN+(CH3)3 as an ex-ample, the molecular exchanging energy (ε) of adsorption on the surface monolayer of aqueous solu-tion has been studied. ε can be obtained with two methods. One is from the relationship between ε and the molecule interaction parameter (β). This relationship is founded by considering that the adsorption of mixed surfactants on the surface monolayer of solution satisfies the dimensional crystal model condition under which β can be obtained by testing the surface tension of solution. The other is directly from the molecular structure of surfactants with the Lennard-Jones formula. The results for the studied system show that these two methods coincide well.展开更多
Benggang is a typical fragmented erosional landscape in southern and southeastern China,posing sig-nificant risk to the local residents and economic development.Therefore,an efficient and accurate fine-grained segment...Benggang is a typical fragmented erosional landscape in southern and southeastern China,posing sig-nificant risk to the local residents and economic development.Therefore,an efficient and accurate fine-grained segmentation method is crucial for monitoring the Benggang areas.In this paper,we propose a deep learning-based automatic segmentation method for Benggang by integrating high-resolution Digital Orthophoto Map(DOM)and Digital Surface Model(DSM)data.The DSM data is used to extract slope maps,aiming to capture primary morphological features.The proposed method consists of a dual-stream convolutional encoder-decoder network in which multiple cascaded convolutional layers and a skip connection scheme are used to extract morphological and visual features of the Benggang areas.The rich discriminative information in the DOM and slope data is fused by a channel exchanging mechanism that dynamically exchanges the most discriminative features from either the DOM or DSM stream ac-cording to their importance at the channel level.Evaluation experiments were conducted on a chal-lenging dataset collected from Guangdong Province,China,and the results show that the proposed channel exchanging network based deep fusion method achieves 84.62%IoU in Benggang segmentation,outperforming several existing unimodal or multimodal baselines.The proposed multimodal segmen-tation method greatly improves the efficiency of large-scale discovery of Benggang,and thus is important for the management and restoration of Benggang in southern and southeastern China,as well as the monitoring of other similar erosional landscapes.展开更多
A Tibetan art form bridges the past and present and connects cultures around the world.THANGKA,a unique form of Tibetan sacred painting,is gaining prominence globally due to its vibrant colors,exquisite craftsmanship,...A Tibetan art form bridges the past and present and connects cultures around the world.THANGKA,a unique form of Tibetan sacred painting,is gaining prominence globally due to its vibrant colors,exquisite craftsmanship,and profound religious and cultural significance.With the acceleration of globalization,this symbol of Tibetan culture that combines artistic expression with spirituality has become a bridge for cultural exchange between the East and the West.Recently,China Today spoke to Yixi Puncog,art collector and council member of the China Association for Preservation and Development of Tibetan Culture,to learn more about Thangka art,its role in international exchange,and how it is enhancing China’s cultural soft power.展开更多
In 2021,the relatives of 16 international friends of China jointly sent a letter to Chinese President Xi Jinping,congratulating the Communist Party of China(CPC)on its 100th anniversary.These are the sons and daughter...In 2021,the relatives of 16 international friends of China jointly sent a letter to Chinese President Xi Jinping,congratulating the Communist Party of China(CPC)on its 100th anniversary.These are the sons and daughters and family members of those who helped China in its times of need.Eric Foster,nephew of renowned U.S.journalist Helen Foster-Snow,was one of them.展开更多
John Owen-Jones,a West End performer best known for his record-breaking runs in Les Miserables and The Phantom of the Opera,is touring China with an all-star cast and discussing exchanges between Western and Chinese m...John Owen-Jones,a West End performer best known for his record-breaking runs in Les Miserables and The Phantom of the Opera,is touring China with an all-star cast and discussing exchanges between Western and Chinese musical theater.展开更多
Ambient-air,moisture-assisted annealing is widely used in fabricating perovskite solar cells(PSCs).However,the inherent sensitivity of perovskite intermediate-phase to moisture—due to fast and spontaneous intermolecu...Ambient-air,moisture-assisted annealing is widely used in fabricating perovskite solar cells(PSCs).However,the inherent sensitivity of perovskite intermediate-phase to moisture—due to fast and spontaneous intermolecular exchange reaction—requires strict control of ambient humidity and immediate thermal annealing treatment,raising manufacturing costs and causing fast nucleation of perovskite films.We report herein a self-buffered molecular migration strategy to slow down the intermolecular exchange reaction by introducing a n-butylammonium bromide shielding layer,which limits moisture diffusion into intermediate-phase film.This further endows the notably wide nucleation time and humidity windows for perovskite crystallization in ambient air.Consequently,the optimized 1.68 e V-bandgap n-i-p structured PSC reaches a record-high reverse-scan(RS)PCE of 22.09%.Furthermore,the versatility and applicability of as-proposed self-buffered molecular migration strategy are certified by employing various shielding materials and 1.53 eV-/1.77 eV-bandgap perovskite materials.The n-i-p structured PSCs based on 1.53 eV-and 1.77 eV-bandgap perovskite films achieve outstanding RS PCEs of 25.23%and 19.09%,respectively,both of which are beyond of the state-of-the-art ambient-air processed PSCs.展开更多
Coiled tube heat exchangers are widely preferred in shell structures due to their superior heat transfer performance,driven by favorable flow characteristics.This study investigates the effect of modifying coil and sh...Coiled tube heat exchangers are widely preferred in shell structures due to their superior heat transfer performance,driven by favorable flow characteristics.This study investigates the effect of modifying coil and shell configurations on heat transfer efficiency.Two key enhancements were examined:adding fins to the outer coil surface and integrating longitudinal slots within a hollowed shell.These modifications promote turbulence and extend heat transfer duration,thereby improving performance.However,they also introduce challenges,including increased pressure loss andmanufacturing complexity.Numerical simulationswere conducted usingANSYS Fluent 2024R1 under identical boundary conditions.With a fixed cold-side flow rate of 3 L/min,the input temperatures for the hot and cold fluids were 333.15 and 291.65 K,respectively.The hot-side flow rate varied between 2 and 6 L/min.Simulation outcomes were reported for the objectives of the study that included the improvement in heat exchangers’heat transfer enhancement.As it was indicated in the study outcomes,the average heat transfer rate increased by 15.56%,the overall heat transfer coefficient enhanced by about 29.51%,and the convective heat transfer coefficient improved by about 75.96%compared to the conventional shell-and-coil tube heat exchanger model.However,the modified technique resulted in a significant pressure drop.展开更多
ISO releases two standards for textiles.Recently,two international standards,ISO 8159:2025,Textiles-Morphology of fibres and yarns-Vocabulary,and ISO 17971:2025,Textiles-Smart textiles-Test method for determining the ...ISO releases two standards for textiles.Recently,two international standards,ISO 8159:2025,Textiles-Morphology of fibres and yarns-Vocabulary,and ISO 17971:2025,Textiles-Smart textiles-Test method for determining the screen-touch properties of fabrics,were officially released.They are of positive significance for eliminating technical ambiguities in exchanges on textile products and filling the gaps in international standards.展开更多
The Belt and Road Initiative and Xinjiang Editors:Foreign Affairs Office of the People’s Government of Xinjiang Uygur Autonomous Region&China Global Television Network of China Media Group Paperback,187 pages Pub...The Belt and Road Initiative and Xinjiang Editors:Foreign Affairs Office of the People’s Government of Xinjiang Uygur Autonomous Region&China Global Television Network of China Media Group Paperback,187 pages Published by Foreign Languages Press As a key junction along the ancient Silk Road,Xinjiang served as a vital crossroads for cultural exchanges between the Eastern and Western civilizations.Thanks to its unique geographic advantages,the region has been designated as a core area of the Belt and Road Initiative(BRI)and is playing a pivotal role in China’s westward opening-up.展开更多
3D printing,as a versatile additive manufacturing technique,offers high design flexibility,rapid prototyping,minimal material waste,and the capability to fabricate complex,customized geometries.These attributes make i...3D printing,as a versatile additive manufacturing technique,offers high design flexibility,rapid prototyping,minimal material waste,and the capability to fabricate complex,customized geometries.These attributes make it particularly well-suited for low-temperature hydrogen electrochemical conversion devices—specifically,proton exchange membrane fuel cells,proton exchange membrane electrolyzer cells,anion exchange membrane electrolyzer cells,and alkaline electrolyzers—which demand finely structured components such as catalyst layers,gas diffusion layers,electrodes,porous transport layers,and bipolar plates.This review provides a focused and critical summary of the current progress in applying 3D printing technologies to these key components.It begins with a concise introduction to the principles and classifications of mainstream 3D printing methods relevant to the hydrogen energy sector and proceeds to analyze their specific applications and performance impacts across different device architectures.Finally,the review identifies existing technical challenges and outlines future research directions to accelerate the integration of 3D printing in nextgeneration low-temperature hydrogen energy systems.展开更多
The increased interest in geothermal energy is evident,along with the exploitation of traditional hydrothermal systems,in the growing research and projects developing around the reuse of already-drilled oil,gas,and ex...The increased interest in geothermal energy is evident,along with the exploitation of traditional hydrothermal systems,in the growing research and projects developing around the reuse of already-drilled oil,gas,and exploration wells.The Republic of Croatia has around 4000 wells,however,due to a long period since most of these wells were drilled and completed,there is uncertainty about how many are available for retrofitting as deep-borehole heat exchangers.Nevertheless,as hydrocarbon production decreases,it is expected that the number of wells available for the revitalization and exploitation of geothermal energy will increase.The revitalization of wells via deep-borehole heat exchangers involves installing a coaxial heat exchanger and circulating the working fluid in a closed system,during which heat is transferred from the surrounding rock medium to the circulating fluid.Since drilled wells are not of uniformdepth and are located in areas with different thermal rock properties and geothermal gradients,an analysis was conducted to determine available thermal energy as a function of well depth,geothermal gradient,and circulating fluid flow rate.Additionally,an economic analysis was performed to determine the benefits of retrofitting existing assets,such as drilled wells,compared to drilling new wells to obtain the same amount of thermal energy.展开更多
Radiative cooling textiles with spectrally selective surfaces offer a promising energy-efficient approach for sub-ambient cooling of outdoor objects and individuals.However,the spectrally selective mid-infrared emissi...Radiative cooling textiles with spectrally selective surfaces offer a promising energy-efficient approach for sub-ambient cooling of outdoor objects and individuals.However,the spectrally selective mid-infrared emission of these textiles significantly hinders their efficient radiative heat exchange with self-heated objects,thereby posing a significant challenge to their versatile cooling applicability.Herein,we present a bicomponent blow spinning strategy for the production of scalable,ultra-flexible,and healable textiles featuring a tailored dual gradient in both chemical composition and fiber diameter.The gradient in the fiber diameter of this textile introduces a hierarchically porous structure across the sunlight incident area,thereby achieving a competitive solar reflectivity of 98.7%on its outer surface.Additionally,the gradient in the chemical composition of this textile contributes to the formation of Janus infrared-absorbing surfaces:The outer surface demonstrates a high mid-infrared emission,whereas the inner surface shows a broad infrared absorptivity,facilitating radiative heat exchange with underlying self-heated objects.Consequently,this textile demonstrates multi-scenario radiative cooling capabilities,enabling versatile outdoor cooling for unheated objects by 7.8℃ and self-heated objects by 13.6℃,compared to commercial sunshade fabrics.展开更多
文摘By adopting sodium silicate as a major material,SiO_2 nanoparticles (size in 8-15nm) water-dispersiod was prepared by ion exchanging.The effects of sodium silicate concentration,surface-modifying time,temperature and technological conditions on their diameter,size distribution and dispersion stability were also studied.The result show that,the hydrophilic lipophlic and hydrophilic-lipophilic SiO_(2) nanoparticles water-dispersoid can be prepared through different kinds of surface-modifiers and the optimum reaction conditions have been determined as follows:sodium silicate solution concentration:8w%;silicone dosage:3% of the total mass of nano SiO_(2) water-dispersoid;adding way and time of surface-modifier:continual dropping for 2h;surface-modifying temperature:60-70℃.
基金the State Natural Science Foundation of China(No.30070178)the Governor Foundation of Guizhou Province for their financial supports.
文摘In order to study synergism of the mixed surfactants system with molecular exchanging energy (E), the Lennard-Jones formula has been firstly introduced to evaluate the E of the mixed system, CH3(CH2)nOSO 3 /CH3(CH2)nN+(CH3)3 directly from their molecular structure. The comparison of the calculated and the observed results showed that this method is practical.
文摘Cold metal transfer with polarity⁃exchanging is a new integrated welding technology based on MIG.Due to the alternation of the positive and negative polarities of the wire,favorable control upon the deposition rate and the welding shape coefficient was obtained in order to meet the desired joint design,and the related controlling principles and joint characteristics were reported.Droplet transfer physical behavior exhibited strong dependability on the studied welding parameters,such as welding voltage,welding current,wire feeding speed,and polarity⁃exchanging.This welding technology provides a new way for the welding of body⁃in⁃white(BIW)thin sheet with special demands.Moreover,the typical quality defects of MIG were greatly improved.Our study provides important technical information from the perspective of industrial application of MIG and sheds light on the higher application level of MIG in BIW welding.
基金Supported by National Natural Science Foundation of China(No.50902103)
文摘Laser plays an important role in synthesizing nanometer material. A three-dimensional mathematical model is established in this paper when single pulsed millisecond laser shocks the surface of the metal target at a liquid-solid interface. By changing laser power density and target size, the temperature field variation of the metal target is investigated. Results show that the generation process of nanoparticles includes heating, melting and boiloff.
基金This research is supported by Special Science Fund on University Doctor Science Point of the Department of Education of China (20020698027).
文摘At present, electricity price to grid of domestic power plants is priced by the national administration based on the policy of "one power plant with one electricity price to grid," which is difficult to realize real bidding for access to grid in practice in a short term. This paper presents one kind of power-exchanging transaction model among price-varied power plants, which will be beneficial to price-varied power plants without any loss of profits of them and guarantee state-owned assets profits in minimum loss with no promotion of average price limit by power plants. Under ideal conditions, the computation results showed the sufficiency and necessity of power-exchanging transaction and maximum similarity with the requirements of optimized resources disposition in economics. The presented model is shown to be full of practicability and has been used in some part of power market.
基金Supported by the National Natural Science Foundation of China (Grant Nos. 20676051 and 20573034)the Important Construction Project (Category A) of Shanghai Jiao Tong University (Grant No. AE 150085)
文摘By using the binary anionic/cationic surfactants system CH3(CH2)nOSO_3/CH3(CH2)nN+(CH3)3 as an ex-ample, the molecular exchanging energy (ε) of adsorption on the surface monolayer of aqueous solu-tion has been studied. ε can be obtained with two methods. One is from the relationship between ε and the molecule interaction parameter (β). This relationship is founded by considering that the adsorption of mixed surfactants on the surface monolayer of solution satisfies the dimensional crystal model condition under which β can be obtained by testing the surface tension of solution. The other is directly from the molecular structure of surfactants with the Lennard-Jones formula. The results for the studied system show that these two methods coincide well.
基金funded by Key Research and Development Program of Hubei Province,China under grant 2021BAA186the National Natural Science Foundation of China under grant number 41601298.
文摘Benggang is a typical fragmented erosional landscape in southern and southeastern China,posing sig-nificant risk to the local residents and economic development.Therefore,an efficient and accurate fine-grained segmentation method is crucial for monitoring the Benggang areas.In this paper,we propose a deep learning-based automatic segmentation method for Benggang by integrating high-resolution Digital Orthophoto Map(DOM)and Digital Surface Model(DSM)data.The DSM data is used to extract slope maps,aiming to capture primary morphological features.The proposed method consists of a dual-stream convolutional encoder-decoder network in which multiple cascaded convolutional layers and a skip connection scheme are used to extract morphological and visual features of the Benggang areas.The rich discriminative information in the DOM and slope data is fused by a channel exchanging mechanism that dynamically exchanges the most discriminative features from either the DOM or DSM stream ac-cording to their importance at the channel level.Evaluation experiments were conducted on a chal-lenging dataset collected from Guangdong Province,China,and the results show that the proposed channel exchanging network based deep fusion method achieves 84.62%IoU in Benggang segmentation,outperforming several existing unimodal or multimodal baselines.The proposed multimodal segmen-tation method greatly improves the efficiency of large-scale discovery of Benggang,and thus is important for the management and restoration of Benggang in southern and southeastern China,as well as the monitoring of other similar erosional landscapes.
文摘A Tibetan art form bridges the past and present and connects cultures around the world.THANGKA,a unique form of Tibetan sacred painting,is gaining prominence globally due to its vibrant colors,exquisite craftsmanship,and profound religious and cultural significance.With the acceleration of globalization,this symbol of Tibetan culture that combines artistic expression with spirituality has become a bridge for cultural exchange between the East and the West.Recently,China Today spoke to Yixi Puncog,art collector and council member of the China Association for Preservation and Development of Tibetan Culture,to learn more about Thangka art,its role in international exchange,and how it is enhancing China’s cultural soft power.
文摘In 2021,the relatives of 16 international friends of China jointly sent a letter to Chinese President Xi Jinping,congratulating the Communist Party of China(CPC)on its 100th anniversary.These are the sons and daughters and family members of those who helped China in its times of need.Eric Foster,nephew of renowned U.S.journalist Helen Foster-Snow,was one of them.
文摘John Owen-Jones,a West End performer best known for his record-breaking runs in Les Miserables and The Phantom of the Opera,is touring China with an all-star cast and discussing exchanges between Western and Chinese musical theater.
基金the financial support from the National Key R&D Program of China(2021YFF0500500)the National Natural Science Foundation of China(62474131,62274132,and 62204189)。
文摘Ambient-air,moisture-assisted annealing is widely used in fabricating perovskite solar cells(PSCs).However,the inherent sensitivity of perovskite intermediate-phase to moisture—due to fast and spontaneous intermolecular exchange reaction—requires strict control of ambient humidity and immediate thermal annealing treatment,raising manufacturing costs and causing fast nucleation of perovskite films.We report herein a self-buffered molecular migration strategy to slow down the intermolecular exchange reaction by introducing a n-butylammonium bromide shielding layer,which limits moisture diffusion into intermediate-phase film.This further endows the notably wide nucleation time and humidity windows for perovskite crystallization in ambient air.Consequently,the optimized 1.68 e V-bandgap n-i-p structured PSC reaches a record-high reverse-scan(RS)PCE of 22.09%.Furthermore,the versatility and applicability of as-proposed self-buffered molecular migration strategy are certified by employing various shielding materials and 1.53 eV-/1.77 eV-bandgap perovskite materials.The n-i-p structured PSCs based on 1.53 eV-and 1.77 eV-bandgap perovskite films achieve outstanding RS PCEs of 25.23%and 19.09%,respectively,both of which are beyond of the state-of-the-art ambient-air processed PSCs.
文摘Coiled tube heat exchangers are widely preferred in shell structures due to their superior heat transfer performance,driven by favorable flow characteristics.This study investigates the effect of modifying coil and shell configurations on heat transfer efficiency.Two key enhancements were examined:adding fins to the outer coil surface and integrating longitudinal slots within a hollowed shell.These modifications promote turbulence and extend heat transfer duration,thereby improving performance.However,they also introduce challenges,including increased pressure loss andmanufacturing complexity.Numerical simulationswere conducted usingANSYS Fluent 2024R1 under identical boundary conditions.With a fixed cold-side flow rate of 3 L/min,the input temperatures for the hot and cold fluids were 333.15 and 291.65 K,respectively.The hot-side flow rate varied between 2 and 6 L/min.Simulation outcomes were reported for the objectives of the study that included the improvement in heat exchangers’heat transfer enhancement.As it was indicated in the study outcomes,the average heat transfer rate increased by 15.56%,the overall heat transfer coefficient enhanced by about 29.51%,and the convective heat transfer coefficient improved by about 75.96%compared to the conventional shell-and-coil tube heat exchanger model.However,the modified technique resulted in a significant pressure drop.
文摘ISO releases two standards for textiles.Recently,two international standards,ISO 8159:2025,Textiles-Morphology of fibres and yarns-Vocabulary,and ISO 17971:2025,Textiles-Smart textiles-Test method for determining the screen-touch properties of fabrics,were officially released.They are of positive significance for eliminating technical ambiguities in exchanges on textile products and filling the gaps in international standards.
文摘The Belt and Road Initiative and Xinjiang Editors:Foreign Affairs Office of the People’s Government of Xinjiang Uygur Autonomous Region&China Global Television Network of China Media Group Paperback,187 pages Published by Foreign Languages Press As a key junction along the ancient Silk Road,Xinjiang served as a vital crossroads for cultural exchanges between the Eastern and Western civilizations.Thanks to its unique geographic advantages,the region has been designated as a core area of the Belt and Road Initiative(BRI)and is playing a pivotal role in China’s westward opening-up.
基金the support from the National Natural Science Foundation of China(Nos.22208376,UA22A20429)the Qingdao New Energy Shandong Laboratory Open Project(QNESL OP 202303)+3 种基金Shandong Provincial Natural Science Foundation(Nos.ZR2024QB175,ZR2023LFG005)Fundamental Research Funds for the Central Universities(No.25CX07002A)National Natural Science Foundation of China(Z202401390008)The Hunan Provincial Natural Science Foundation(2025JJ60301)。
文摘3D printing,as a versatile additive manufacturing technique,offers high design flexibility,rapid prototyping,minimal material waste,and the capability to fabricate complex,customized geometries.These attributes make it particularly well-suited for low-temperature hydrogen electrochemical conversion devices—specifically,proton exchange membrane fuel cells,proton exchange membrane electrolyzer cells,anion exchange membrane electrolyzer cells,and alkaline electrolyzers—which demand finely structured components such as catalyst layers,gas diffusion layers,electrodes,porous transport layers,and bipolar plates.This review provides a focused and critical summary of the current progress in applying 3D printing technologies to these key components.It begins with a concise introduction to the principles and classifications of mainstream 3D printing methods relevant to the hydrogen energy sector and proceeds to analyze their specific applications and performance impacts across different device architectures.Finally,the review identifies existing technical challenges and outlines future research directions to accelerate the integration of 3D printing in nextgeneration low-temperature hydrogen energy systems.
文摘The increased interest in geothermal energy is evident,along with the exploitation of traditional hydrothermal systems,in the growing research and projects developing around the reuse of already-drilled oil,gas,and exploration wells.The Republic of Croatia has around 4000 wells,however,due to a long period since most of these wells were drilled and completed,there is uncertainty about how many are available for retrofitting as deep-borehole heat exchangers.Nevertheless,as hydrocarbon production decreases,it is expected that the number of wells available for the revitalization and exploitation of geothermal energy will increase.The revitalization of wells via deep-borehole heat exchangers involves installing a coaxial heat exchanger and circulating the working fluid in a closed system,during which heat is transferred from the surrounding rock medium to the circulating fluid.Since drilled wells are not of uniformdepth and are located in areas with different thermal rock properties and geothermal gradients,an analysis was conducted to determine available thermal energy as a function of well depth,geothermal gradient,and circulating fluid flow rate.Additionally,an economic analysis was performed to determine the benefits of retrofitting existing assets,such as drilled wells,compared to drilling new wells to obtain the same amount of thermal energy.
基金financial support from the National Natural Science Foundation of China(Grant No.52273067,52233006)the Fundamental Research Funds for the Central Universities(Grant No.2232023A-03)+3 种基金the Shuguang Program of Shanghai Education Development Foundation and Shanghai Municipal Education Commission(Grant No.23SG29)the Natural Science Foundation of Shanghai(Grant No.24ZR1402400)the Shanghai Scientific and Technological Innovation Project(Grant No.24520713000)Innovation Program of Shanghai Municipal Education Commission(Grant No.2021-01-07-00-03-E00108).
文摘Radiative cooling textiles with spectrally selective surfaces offer a promising energy-efficient approach for sub-ambient cooling of outdoor objects and individuals.However,the spectrally selective mid-infrared emission of these textiles significantly hinders their efficient radiative heat exchange with self-heated objects,thereby posing a significant challenge to their versatile cooling applicability.Herein,we present a bicomponent blow spinning strategy for the production of scalable,ultra-flexible,and healable textiles featuring a tailored dual gradient in both chemical composition and fiber diameter.The gradient in the fiber diameter of this textile introduces a hierarchically porous structure across the sunlight incident area,thereby achieving a competitive solar reflectivity of 98.7%on its outer surface.Additionally,the gradient in the chemical composition of this textile contributes to the formation of Janus infrared-absorbing surfaces:The outer surface demonstrates a high mid-infrared emission,whereas the inner surface shows a broad infrared absorptivity,facilitating radiative heat exchange with underlying self-heated objects.Consequently,this textile demonstrates multi-scenario radiative cooling capabilities,enabling versatile outdoor cooling for unheated objects by 7.8℃ and self-heated objects by 13.6℃,compared to commercial sunshade fabrics.
