On the basis of considering electrochemical reactions and collision relations in detail, a direct numerical simulation model of a helicon plasma discharge with three-dimensional two-fluid equations was employed to stu...On the basis of considering electrochemical reactions and collision relations in detail, a direct numerical simulation model of a helicon plasma discharge with three-dimensional two-fluid equations was employed to study the characteristics of the temporal evolution of particle density and electron temperature. With the assumption of weak ionization, the Maxwell equations coupled with the plasma parameters were directly solved in the whole computational domain. All of the partial differential equations were solved by the finite element solver in COMSOL Multiphysics^（TM） with a fully coupled method. In this work, the numerical cases were calculated with an Ar working medium and a Shoji-type antenna. The numerical results indicate that there exist two distinct modes of temporal evolution of the electron and ground atom density, which can be explained by the ion pumping effect. The evolution of the electron temperature is controlled by two schemes： electromagnetic wave heating and particle collision cooling. The high RF power results in a high peak electron temperature while the high gas pressure leads to a low steady temperature. In addition, an OES experiment using nine Ar I lines was conducted using a modified CR model to verify the validity of the results by simulation, showing that the trends of temporal evolution of electron density and temperature are well consistent with the numerically simulated ones.展开更多
The island coal face arises in coal mines with the purpose of preventing gas explosion or maintaining the balance between mining and tunneling. However, its particular stress conditions in the surrounding rock may inc...The island coal face arises in coal mines with the purpose of preventing gas explosion or maintaining the balance between mining and tunneling. However, its particular stress conditions in the surrounding rock may increase the difficulty of stress control in the coal face and in its mining roadways, especially when the coal seam, the roof, and the floor have rock-burst propensities, The high energy accumulated in the island coal face and in its roof and floor will intensify rock-burst propensity or even induce rock burst, which further result in great casualties and financial losses. Taking island coal face 2321 in Jinqiao coal mine as a case, we propose a method for the prediction of rock-burst-threatened areas in an island coal face with weak rock-burst propensity. Based on the anaHysis of the movement of the overlying roof and characteristics of stress distribution, this method combined numerical simulation with drilling bits to ensure the prediction accuracy. The effects of coal pillars with different widths on the mitigation of stress concentration in the coal face and on the prevention of rock burst are analyzed together with the mech- anism behind. Finally, corresponding measures against the rock burst in the island coal face are proposed.展开更多
According to the special requirements of secondary mining of resources in gateway-and-pillar goal in extra-thick seams of Shanxi, this paper presents a technical proposal of back stoping from level floors. Numerical s...According to the special requirements of secondary mining of resources in gateway-and-pillar goal in extra-thick seams of Shanxi, this paper presents a technical proposal of back stoping from level floors. Numerical simulation and theoretical analysis are ccsed to investigate the compaction characteristics of cavities under stress as well as an appropriate mining height of the primary-mining layer based on dif- ferent mining widths and pillar widths. For Yangjian coal mine, the mining thickness of the first seam during back stoping from level floor is determined to be 3 m, which meets the relevant requirements. Gateway-and-pillar goaf of a single layer has a range of influence of 9 m vertically. If gateway-and-pillar goaf occurs both in 9-1 and 9-5 layers, the range is extended to within 11.2 m. When the mining width of a gateway is less than 2 m or larger than 5 m, the gateway-and-pillar goal in the upper layer of the primary-mining seam can be filled in and compacted after stoping. When the working face is 2 m away from the gateway and pillar before entering into it and after passing through it, the coal body under the gateway and pillar is subjected to relatively high stress. During mining of the upper layer, moreover, the working face should interlock the goaf in primary-mining layer for 20 m.展开更多
基金funding from National Natural Science Foundation of China under grant agreement No. 11305265 (research on the acceleration mechanism of an electric double layer in a helicon plasma with a divergent magnetic field)
文摘On the basis of considering electrochemical reactions and collision relations in detail, a direct numerical simulation model of a helicon plasma discharge with three-dimensional two-fluid equations was employed to study the characteristics of the temporal evolution of particle density and electron temperature. With the assumption of weak ionization, the Maxwell equations coupled with the plasma parameters were directly solved in the whole computational domain. All of the partial differential equations were solved by the finite element solver in COMSOL Multiphysics^（TM） with a fully coupled method. In this work, the numerical cases were calculated with an Ar working medium and a Shoji-type antenna. The numerical results indicate that there exist two distinct modes of temporal evolution of the electron and ground atom density, which can be explained by the ion pumping effect. The evolution of the electron temperature is controlled by two schemes： electromagnetic wave heating and particle collision cooling. The high RF power results in a high peak electron temperature while the high gas pressure leads to a low steady temperature. In addition, an OES experiment using nine Ar I lines was conducted using a modified CR model to verify the validity of the results by simulation, showing that the trends of temporal evolution of electron density and temperature are well consistent with the numerically simulated ones.
基金provided by the National Natural Science Foundation of China (Nos.51304208 and 51474208)
文摘The island coal face arises in coal mines with the purpose of preventing gas explosion or maintaining the balance between mining and tunneling. However, its particular stress conditions in the surrounding rock may increase the difficulty of stress control in the coal face and in its mining roadways, especially when the coal seam, the roof, and the floor have rock-burst propensities, The high energy accumulated in the island coal face and in its roof and floor will intensify rock-burst propensity or even induce rock burst, which further result in great casualties and financial losses. Taking island coal face 2321 in Jinqiao coal mine as a case, we propose a method for the prediction of rock-burst-threatened areas in an island coal face with weak rock-burst propensity. Based on the anaHysis of the movement of the overlying roof and characteristics of stress distribution, this method combined numerical simulation with drilling bits to ensure the prediction accuracy. The effects of coal pillars with different widths on the mitigation of stress concentration in the coal face and on the prevention of rock burst are analyzed together with the mech- anism behind. Finally, corresponding measures against the rock burst in the island coal face are proposed.
基金Financial support for this work was provided by the National High-Tech Research and Development Program of China (No. 2012AA062101)the Priority Academic Development Program of Jiangsu Higher Education Institutions (No. SZBF2011-6-B35)the Graduate Students Innovation Fund of Colleges and Universities in Jiangsu Province (No. CXZZ12_0950)
文摘According to the special requirements of secondary mining of resources in gateway-and-pillar goal in extra-thick seams of Shanxi, this paper presents a technical proposal of back stoping from level floors. Numerical simulation and theoretical analysis are ccsed to investigate the compaction characteristics of cavities under stress as well as an appropriate mining height of the primary-mining layer based on dif- ferent mining widths and pillar widths. For Yangjian coal mine, the mining thickness of the first seam during back stoping from level floor is determined to be 3 m, which meets the relevant requirements. Gateway-and-pillar goaf of a single layer has a range of influence of 9 m vertically. If gateway-and-pillar goaf occurs both in 9-1 and 9-5 layers, the range is extended to within 11.2 m. When the mining width of a gateway is less than 2 m or larger than 5 m, the gateway-and-pillar goal in the upper layer of the primary-mining seam can be filled in and compacted after stoping. When the working face is 2 m away from the gateway and pillar before entering into it and after passing through it, the coal body under the gateway and pillar is subjected to relatively high stress. During mining of the upper layer, moreover, the working face should interlock the goaf in primary-mining layer for 20 m.
