With the rapid development of twodimensional MXene materials,numerous preparation strategies have been proposed to enhance synthesis efficiency,mitigate environmental impact,and enable scalability for large-scale prod...With the rapid development of twodimensional MXene materials,numerous preparation strategies have been proposed to enhance synthesis efficiency,mitigate environmental impact,and enable scalability for large-scale production.The compound etching approach,which relies on cationic oxidation of the A element of MAX phase precursors while anions typically adsorb onto MXene surfaces as functional groups,remains the main prevalent strategy.By contrast,synthesis methodologies utilizing elemental etching agents have been rarely reported.Here,we report a new elemental tellurium(Te)-based etching strategy for the preparation of MXene materials with tunable surface chemistry.By selectively removing the A-site element in MAX phases using Te,our approach avoids the use of toxic fluoride reagents and achieves tellurium-terminated surface groups that significantly enhance sodium storage performance.Experimental results show that Te-etched MXene delivers substantially higher capacities(exceeding 50%improvement over conventionally etched MXene)with superior rate capability,retaining high capacity at large current densities and demonstrating over 90%capacity retention after 1000 cycles.This innovative synthetic strategy provides new insight into controllable MXene preparation and performance optimization,while the as-obtained materials hold promises for high-performance sodium-ion batteries and other energy storage systems.展开更多
In the past decades, the necessity for detailed earthquake microzonation studies was recognized worldwide. Therefore, different approaches were established and applied. Unfortunately, the majority of these approaches ...In the past decades, the necessity for detailed earthquake microzonation studies was recognized worldwide. Therefore, different approaches were established and applied. Unfortunately, the majority of these approaches are not based on pre-existing field data but require extensive seismic measurements and investigations. Furthermore, these approaches incorporate non-linearity inadequately and cannot take groundwater level changes into account. For this purpose, notably numerical models are most suitable. These models require a good knowledge of the local geological conditions （especially of the uppermost unconsolidated units）, information about the geotechnical parameters of these units, and a hydrogeological model of the investigated area. Most of this information can be obtained from geotechnical investigations and surveys that have already been carried out in most densely populated areas. In a case study for Bucharest City, non-linear analyses were performed using software that is based on the visco-hypoplastic constitutive law. The results indicate that groundwater level changes have an important influence on duration and amplitude of ground response and thus should be considered for seismic microzonation studies. This approach ean be used to display site effects and to identify different microzones taking different earthquake magnitudes and groundwater levels into account.展开更多
CeO2/TiO2 composite nanoparticles with different Ce/Ti molar ratios have been successfully synthesized via sol-gel method. It was found that the band gap of the nanocomposite is tunable by varying Ce/Ti content. The n...CeO2/TiO2 composite nanoparticles with different Ce/Ti molar ratios have been successfully synthesized via sol-gel method. It was found that the band gap of the nanocomposite is tunable by varying Ce/Ti content. The nonlinear response of the sample was studied by using the nanosecond laser pulses from a Q switched Nd：Yag laser employing the Z-scan method. Open aperture Z-scan experiment revealed that with the increase in the CeO2 amount in the nanocomposite, the non-linearity of the composite increases, and it was assumed that this could be due to the modification of TiO2 dipole symmetry by the addition of CeO2. Closed aperture Z-scan experiment showed that when the CeO2 amount increases, positive nonlinear refraction decreases, and this could be attributed to the increase in the two photon absorption which subsequently suppresses the nonlinear refraction.展开更多
Lutetium oxide(Lu_(2)O_(3))is recognized as a potential laser crystal material,and it is noted for its high ther⁃mal conductivity,low phonon energy,and strong crystal field.Nevertheless,its high melting point of 2450...Lutetium oxide(Lu_(2)O_(3))is recognized as a potential laser crystal material,and it is noted for its high ther⁃mal conductivity,low phonon energy,and strong crystal field.Nevertheless,its high melting point of 2450℃induces significant temperature gradients,resulting in a proliferation of defects.The scarcity of comprehensive research on this crystal’s defects hinders the enhancement of crystal quality.In this study,we employed the chemical etching method to examine the etching effects on Lu_(2)O_(3)crystals under various conditions and to identify the optimal conditions for investi⁃gating the dislocation defects of Lu_(2)O_(3)crystals(mass fraction 70%H3PO4,160℃,15-18 min).The morphologies of dislocation etch pits on the(111)-and(110)-oriented Lu_(2)O_(3)wafers were characterized using microscopy,scanning electron microscopy and atomic force microscopy.This research addresses the gap in understanding Lu_(2)O_(3)line defects and offers guidance for optimizing the crystal growth process and improving crystal quality.展开更多
The highly efficient manufacturing of atomic-scale smooth β-Ga_(2)O_(3)surface is fairly challenging because β-Ga_(2)O_(3)is a typical difficult-to-machine material.In this study,a novel plasma dry etching method na...The highly efficient manufacturing of atomic-scale smooth β-Ga_(2)O_(3)surface is fairly challenging because β-Ga_(2)O_(3)is a typical difficult-to-machine material.In this study,a novel plasma dry etching method named plasma-based atom-selective etching(PASE)is proposed to achieve the highly efficient,atomic-scale,and damage-free polishing of β-Ga_(2)O_(3).The plasma is excited through the inductive coupling principle and carbon tetrafluoride is utilized as the main reaction gas to etch β-Ga_(2)O_(3).The core of PASE polishing of β-Ga_(2)O_(3)is the remarkable lateral etching effect,which is ensured by both the intrinsic property of the surface and the extrinsic temperature condition.As revealed by density functional theory-based calculations,the intrinsic difference in the etching energy barrier of atoms at the step edge(2.36 eV)and in the terrace plane(4.37 eV)determines their difference in the etching rate,and their etching rate difference can be greatly enlarged by increasing the extrinsic temperature.The polishing of β-Ga_(2)O_(3)based on the lateral etching effect is further verified in the etching experiments.The Sa roughness of β-Ga_(2)O_(3)(001)substrate is reduced from 14.8 nm to 0.057 nm within 120 s,and the corresponding material removal rate reaches up to 20.96μm·min^(−1).The polished β-Ga_(2)O_(3)displays significantly improved crystalline quality and photoluminescence intensity,and the polishing effect of PASE is independent of the crystal face of β-Ga_(2)O_(3).In addition,the competition between chemical etching and physical reconstruction,which is determined by temperature and greatly affects the surface state of β-Ga_(2)O_(3),is deeply studied for the first time.These findings not only demonstrate the high-efficiency and high-quality polishing of β-Ga_(2)O_(3)via atmospheric plasma etching but also hold significant implications for guiding future plasma-based surface manufacturing of β-Ga_(2)O_(3).展开更多
A gyro-stabilizer is the interesting system that it can apply to marine vessels for diminishes roll motion.Today it has potentially light weight with no hydrodynamics drag and effective at zero forward speed.The...A gyro-stabilizer is the interesting system that it can apply to marine vessels for diminishes roll motion.Today it has potentially light weight with no hydrodynamics drag and effective at zero forward speed.The twin-gyroscope was chosen.Almost,the modelling for designing the system use linear model that it might not comprehensive mission requirement such as high sea condition.The non-linearity analysis was proved by comparison the results between linear and non-linear model of gyro-stabilizer throughout frequency domain also same wave input,constrains and limitations.Moreover,they were cross checked by simulating in time domain.The comparison of interested of linear and non-linear close loop model in frequency domain has demonstrated the similar characteristics but gave different values at same frequency obviously.The results were confirmed again by simulation in irregular beam sea on time domain and they demonstrate the difference of behavior of both systems while the gyro-stabilizers are switching on and off.From the resulting analysis,the non-linear gyro-stabilizer model gives more real results that correspond to more accuracy in a designing gyro-stabilizer control system for various amplitudes and frequencies operating condition especially high sea condition.展开更多
A new type of 785 nm semiconductor laser device has been proposed.The thin cladding and mode expansion layer structure incorporated into the epitaxy on the p-side significantly impacts the regulation of grating etchin...A new type of 785 nm semiconductor laser device has been proposed.The thin cladding and mode expansion layer structure incorporated into the epitaxy on the p-side significantly impacts the regulation of grating etching depth.Thinning of the p-side waveguide layer makes the light field bias to the n-side cladding layer.By coordinating the confinement effect of the cladding layer,the light confinement factor on the p-side is regulated.On the other hand,the introduction of a mode expansion layer facilitates the expansion of the mode profile on the p side cladding layer.Both these factors contribute positively to reducing the grating etching depth.Compared to the reported epitaxial structures of symmetric waveguides,the new structure significantly reduces the etching depth of the grating while ensuring adequate reflection intensity and maintaining resonance.Moreover,to improve the output performance of the device,the new epitaxial structure has been optimized.Based on the traditional epitaxial structure,an energy release layer and an electron blocking layer are added to improve the electronic recombination efficiency.This improved structure has an output performance comparable to that of a symmetric waveguide,despite being able to have a smaller gain area.展开更多
The low porosity and low permeability of shale remain the primary challenges in shale gas exploitation.Traditional single permeability enhancement techniques have shown limited efficacy,failing to effectively address ...The low porosity and low permeability of shale remain the primary challenges in shale gas exploitation.Traditional single permeability enhancement techniques have shown limited efficacy,failing to effectively address these technical bottlenecks.This study investigates the synergistic effects of perforationinduced permeability enhancement and acidizing operations on the mechanical properties and micropore structure of shale.The improved Split Hopkinson Pressure Bar(SHPB)technique was employed to simulate dynamic impact damage under triaxial stress conditions.Damaged and undamaged rock specimens were immersed in a 15%hydrochloric acid solution to fabricate combined-damage specimens and acid-etched specimens with varying damage states.Uniaxial compression tests,X-ray diffraction(XRD)analysis,and scanning electron microscopy(SEM)were conducted on these specimens.SEM images were binarized,and combined with low-temperature nitrogen adsorption tests,the effects of different damage states on the mechanical behavior,energy dissipation,micro-morphology,and pore characteristics of shale were systematically evaluated.Results demonstrate that the peak stress and elastic modulus of shale exhibit a negative correlation with acid-etching duration.The mechanical properties of combined-damage specimens are inferior to those of pure acid-etched specimens,with the minimum peak stress reaching 147.10 MPa—a 43.53%reduction compared to untreated specimens.The energy dissipation ratio significantly increases,with a maximum value of 34.74%.XRD analysis reveals that prolonged acid immersion effectively reduces the carbonate content in specimens,while composite treatment accelerates the reaction between rock matrix and acid solution.Microstructural characterization indicates that acid etching enhances the porosity of shale,particularly the area of mesopores and macropores,with more pronounced pore development and a fragmented interface structure.These findings deepen the understanding of physical mechanisms during shale gas extraction and provide critical theoretical support for optimizing integrated permeability enhancement technologies.展开更多
Metal-organic frameworks(MOFs)have emerged as promising materials owing to their high surface areas,tunable pore sizes,and diverse functionalities.However,their practical deployment is frequently hindered by intrinsic...Metal-organic frameworks(MOFs)have emerged as promising materials owing to their high surface areas,tunable pore sizes,and diverse functionalities.However,their practical deployment is frequently hindered by intrinsic microporosity and structural fragility.In this review,we systematically analyze recent advancements in MOF etching techniques,which strategically modify framework architectures to enhance mass transport,expose active sites,and improve stability.The discussion encompasses a range of methods―including acid,base,ion,solvent,steam,selective,in-situ,pyrolysis,and physical etching―with emphasis on the underlying mechanisms that govern the formation of hierarchical pore structures,defect engineering,and heterojunction formation.Notably,etching approaches facilitate precise control over crystal morphology and surface chemistry,thereby optimizing MOF performance in catalysis,electrocatalysis,photocatalysis,adsorption,energy storage,sensing,and biomedical applications.We also outline challenges such as etchant toxicity,over-etching risks,and scalability,while highlighting emerging strategies and computational simulations to refine the etching process.Ultimately,this review underscores the transformative impact of etching on MOF properties,paving the way for the design of next-generation multifunctional materials that address critical issues in environmental remediation,energy conversion,and beyond.展开更多
Extraterrestrial phenomena have influenced Earth’s processes throughout geological history.Evaluating the impact of extraterrestrial material on the environment is crucial for understanding the evolution of Earth and...Extraterrestrial phenomena have influenced Earth’s processes throughout geological history.Evaluating the impact of extraterrestrial material on the environment is crucial for understanding the evolution of Earth and life.This study incorporates the investigation of micrometeorites(MMs),abundant cosmic materials on Earth,to understand their influence on the chemical composition and biogeochemistry of the ocean.Comprehensive etching and flux analyses reveal that∼95%of cosmic spherules(CSs)entering seawater are etched or wholly dissolved,supplying nutrients to phytoplankton.Barred spherules show the highest degree of etching(∼19%),followed by porphyritic(∼17%),glass(∼15%),cryptocrystalline(∼12%),scoriaceous(∼10%),G-type(∼9%),and I-type(∼6%).Annually,∼3080 tonnes(t)of olivine from MMs dissolve into seawater,contributing∼495 t of Mg^(2+),∼1110 t of Fe^(2+),and∼1928 t of silicic acid.This signifies that over the Indian Ocean’s∼40 Myr history,∼23 Gt of olivine from CSs has dissolved,providing nutrients to seawater and sequestering∼7 Gt of CO_(2).The world ocean during this time has sequestered∼35 Gt of CO_(2),with fluctuations influenced by extraterrestrial activity.For instance,the Veritas event,lasting∼1.5 Myr,sequestered∼6 Gt of CO_(2)from the atmosphere.A robust flux calculation based on∼2 t of deep-sea sediments from 3610 MMs provides a more accurate estimate of the time-averaged flux of∼229 t yr^(−1).These comprehensive analyses reveal MM’s original characteristics,post-deposition processes,geological record and their overall impact on Earth’s marine environments,thereby contributing to our knowledge of the interconnection between terrestrial and extraterrestrial processes.展开更多
This opinion article discusses the original research work of Yünkül et al.(the Authors)published in the Journal of Mountain Science 21(9):3108–3122.Employing non-linear regression,fuzzy logic and artificial...This opinion article discusses the original research work of Yünkül et al.(the Authors)published in the Journal of Mountain Science 21(9):3108–3122.Employing non-linear regression,fuzzy logic and artificial neural network modeling techniques,the Authors interrogated a large database assembled from the existing research literature to assess the performance of twelve equation rules in predicting the undrained shear strength(s_(u))mobilized for remolded fine-grained soils at different values of liquidity index(I_(L))and water content ratio.Based on their analyses,the Authors proposed a simple and reportedly reliable correlation(i.e.,Eq.9 in their paper)for predicting s_(u) over the I_(L) range of 0.15 to 3.00.This article describes various shortcomings in the Authors’assembled database(including potentially anomalous data and covering an excessively wide I_(L) range in relation to routine geotechnical and transportation engineering applications)and their proposed s_(u)=f(I_(L))correlation.Contrary to the Authors’assertions,their proposed correlation is not reliable for fine-grained soils with consistencies in the general firm to stiff range(i.e.,for 0.15<I_(L)<0.40),increasingly overestimating s_(u) for reducing I_(L),and eventually predicting s_(u)→+∞for I_(L)→0.15+(while producing mathematically undefined s_(u) for I_(L)<0.15),thus rendering their correlation unconservative and potentially leading to unsafe geotechnical designs.Exponential or regular-power type s_(u)=f(I_(L))models are more s_(u)itable when developing correlations that are applicable over the full plastic range(of 0<I_(L)<1),thereby providing reasonably conservative s_(u) predictions for use in the preliminary design for routine geotechnical engineering applications.展开更多
Many experiments have supported the contact models,such as the GW and MB models,but the majority of previous validations have been performed under light loads,resulting in a linear relationship between normal force an...Many experiments have supported the contact models,such as the GW and MB models,but the majority of previous validations have been performed under light loads,resulting in a linear relationship between normal force and contact area.However,the real contact area fraction should never equal one;there must be a limit smaller than the apparent area,implying that the real contact area cannot increase linearly indefinitely.In this paper,the real contact area between two polymethylmethacrylate(PMMA)blocks under heavy load is measured using the total reflection method,and the contact area is analyzed using the image processing method.The results show that the real contact area increases with normal load linearly in light loads but non-linearly in heavy loads;the number of contact spots increases with load linearly in light loads but also non-linearly in heavy loads,synchronous with the change in the real contact area.The GW,MB,and Zhao,Maietta,and Chang(ZMC)models were used to predict the experiment results,but none of them predicted the non-linear stage.A revised GW model based on the bulk deformation hypothesis performs better in predicting the non-linear stage.The study’s findings can be applied to PMMA or other similar materials,and they can serve as a useful reference for future research on the contact mechanisms of other materials.展开更多
FeCl_(3) solution is commonly used in the etching process of stainless steel.The typical etching waste liquid contains a significant amount of Fe^(3+),Fe^(2+),Cr^(3+),and Ni^(2+),making it difficult to reuse and posin...FeCl_(3) solution is commonly used in the etching process of stainless steel.The typical etching waste liquid contains a significant amount of Fe^(3+),Fe^(2+),Cr^(3+),and Ni^(2+),making it difficult to reuse and posing pollution issues.The FeCl_(3) etching waste liquid was the present subject,which aimed to extract Cr^(3+)and Ni^(2+)by selectively adjusting process parameters.Additionally,it investigates the migration behavior and phase transition mechanisms of the iron,chromium,and nickel in different solution systems during treatment,systematically elucidating the regeneration mechanisms of FeCl_(3) etching waste liquid.The results indicate that Cr and Ni can be recycled by controlling parameters such as pH value,temperature,and the valence states of the ions.Following a selective reduction of Fe^(3+)to Fe^(2+)using Fe powder,98.3%of Cr^(3+)was recovered by adjusting the solution’s pH.Subsequently,93.3%of Ni^(2+)was extracted from the Cr-depleted solution through further adjustments to the process parameters.The recovered Cr and Ni can be used to prepare Fe–Cr and Fe–Ni alloy powders.Furthermore,the FeCl_(3) etching solution was regenerated by oxidizing Fe^(2+)and recovering impurities.The theoretical support for the development of new processes for treating FeCl_(3) etching waste liquid is provided.展开更多
Germanium(Ge)-air battery,a new type of semiconductor-air battery,has garnered increasing attention owing to its environmental friendliness,safety,and excellent dynamic performance.However,the flat Ge anode is prone t...Germanium(Ge)-air battery,a new type of semiconductor-air battery,has garnered increasing attention owing to its environmental friendliness,safety,and excellent dynamic performance.However,the flat Ge anode is prone to passivation,owing to GeO_(2) accumulation on its surface,resulting in premature discharge termination.In this study,various nano-Ge pyramid structures(GePS)were prepared using chemical etching(CE)and metal-assisted chemical etching(MACE)methods to enhance the specific surface area of the Ge anode,thereby facilitating the dissolution of the passivation layer.This study revealed that the MACE method significantly accelerated the etching rate of the Ge surface,producing exceptional GePS.Furthermore,Ge-air batteries employing Ge anodes prepared using MACE demonstrated an exceptional discharge life of up to 9240 h(385 days).The peak power density reached 3.03mW/cm^(2),representing improvements of more than 2 times and 1.8 times,respectively,compared with batteries using flat Ge anodes.This study presents a straightforward approach to enhance Ge anode performance,thereby expanding the potential applications of Ge-air batteries.展开更多
Bimetallic oxides are promising electrocatalysts due to their rich composition,facile synthesis,and favorable stability under oxidizing conditions.This paper innovatively proposes a strategy aimed at constructing a on...Bimetallic oxides are promising electrocatalysts due to their rich composition,facile synthesis,and favorable stability under oxidizing conditions.This paper innovatively proposes a strategy aimed at constructing a one-dimensional heterostructure(Fe–NiO/NiMoO_(4) nanoparticles/nanofibers).The strategy commences with the meticulous treatment of NiMoO_(4) nanofibers,utilizing in situ etching techniques to induce the formation of Prussian Blue Analog compounds.In this process,[Fe(CN)_(6)]^(3-)anions react with the NiMoO_(4) host layer to form a steady NiFe PBA.Subsequently,the surface/interface reconstituted NiMoO_(4) nanofibers undergo direct oxidation,leading to a reconfiguration of the surface structure and the formation of a unique Fe–NiO/NiMoO_(4) one-dimensional heterostructure.The catalyst showed markedly enhanced electrocatalytic performance for the oxygen evolution reaction.Density functional theory results reveal that the incorporation of Fe as a dopant dramatically reduces the Gibbs free energy associated with the rate-determining step in the oxygen evolution reaction pathway.This pivotal transformation directly lowers the activation energy barrier,thereby significantly enhancing electron transfer efficiency.展开更多
Organisms have evolved a strain limiting mechanism,reflected as a non-linear elastic constitutive,to prevent large deformations from threatening soft tissue integrity.Compared with linear elastic substrates,the wrinkl...Organisms have evolved a strain limiting mechanism,reflected as a non-linear elastic constitutive,to prevent large deformations from threatening soft tissue integrity.Compared with linear elastic substrates,the wrinkle of films on non-linear elastic substrates has received less attention.In this article,a unique wrinkle evolution of the film-substrate system with a J-shaped non-linear stress-strain relation is reported.The result shows that a concave hexagonal array pattern is formed with the shrinkage strain of the film-substrate systems developing.As the interconnection of hexagonal arrays,a unit cell ridge network appears with properties such as chirality and helix.The subparagraph maze pattern formed with high compression is mainly composed of special single-cell ridge networks such as spiral single cores,chiral double cores,and combined multi-cores.This evolutionary model is highly consistent with the results of experiments,and it also predicts wrinkle morphology that has not yet been reported.These findings can serve as a novel explanation for the surface wrinkle of biological soft tissue,as well as provide references for the preparation of artificial biomaterials and programmable soft matter.展开更多
Perovskite oxides have been widely applied as an effective catalyst in heterogeneous catalysis.However,the rational design of active catalysts has been restricted by the lack of understanding of the electronic structu...Perovskite oxides have been widely applied as an effective catalyst in heterogeneous catalysis.However,the rational design of active catalysts has been restricted by the lack of understanding of the electronic structure.The correlations between surface properties and bulk electronic structure have been ignored.Herein,a simple handler of LaFeO_(3)with diluted HNO3 was employed to tune the electronic structure and catalytic properties.Experimental analysis and theoretical calculations elucidate that acid etching could raise the Fe valence and enhance Fe-O covalency in the octahedral structure,thereby lessening charge transfer energy.Enhanced Fe-O covalency could lower oxygen vacancy formation energy and enhance oxygen mobility.In-situ DRIFTS results indicated the inherent adsorption capability of Toluene and CO molecules has been greatly improved owing to higher Fe-O covalency.As compared,the catalysts after acid etching exhibited higher catalytic activity,and the T_(90)had a great reduction of 45 and 58℃ for toluene and CO oxidation,respectively.A deeper understanding of electronic structure in perovskite oxides may inspire the design of high-performance catalysts.展开更多
Aimed at the doubly near-far problems in a large range suffered by the remote user group and in a small range existing in both nearby and remote user groups during energy harvesting and computation offloading,a resour...Aimed at the doubly near-far problems in a large range suffered by the remote user group and in a small range existing in both nearby and remote user groups during energy harvesting and computation offloading,a resource allocation method for unmanned aerial vehicle(UAV)-assisted and user cooperation non-linear energy harvesting mobile edge computing(MEC)system is proposed.The UAV equipped with an MEC server is introduced to provide energy and computing services for the remote user group to alleviate the doubly near-far problem in a large range suffered by the remote user group.The doubly near-far problem in a small range existing in both nearby and remote user groups is mitigated by user cooperation.The specific user cooperation strategy is that the user near the base station or the UAV is used as a relay to transfer the computing task of the user far from the base station or the UAV to the MEC server for computing.By jointly optimizing users’offloading time,users’transmitting power,and the hovering position of the UAV,the resource allocation problem is modeled as a nonlinear programming problem with the objective of maximizing computation efficiency.The suboptimal solution is obtained by adopting the differential evolution algorithm.Simulation results show that,compared with the resource allocation method based on genetic algorithm and the without user cooperation method,the proposed method has higher computation efficiency.展开更多
Two-dimensional(2D)nitride MXenes are predicted to exhibit exceptional metallic properties and high polarity;however,their synthesis remains challenging.Research has relied on traditional molten salt etching,highlight...Two-dimensional(2D)nitride MXenes are predicted to exhibit exceptional metallic properties and high polarity;however,their synthesis remains challenging.Research has relied on traditional molten salt etching,highlighting the need for a scalable,high-purity approach.Here,we present the first solution-based synthesis of Ti_(4)N_(3)T_(x)MXene via a novel saturated salt solution(S^(3))etching technique employing alkali metal salts.By optimizing the sintering process for high-purity Ti_(4)AlN_(3)MAX and refining the S^(3)etching route,we significantly reduced the etch pit density to 1.2×10^(6)cm^(-2)and lowered the etch pit formation rate to 4%,yielding high-quality,phasepure Ti_(4)N_(3)T_(x)MXene.Our study highlights the critical role of alkali metal ions in selective A-layer removal and demonstrates the impressive electrical conductivity and electromagnetic interference shielding performance of 2D nitride MXene,setting a new benchmark for this underexplored material.These findings pave the way for advancing 2D nitride MXenes and their diverse applications.展开更多
基金supported by the National Natural Science Foundation of China(52472228,22309202)Natural Science Foundation of Sichuan Province(2023NSFSC1942)the Gusu Leading Talents Program(ZXL2023190)。
文摘With the rapid development of twodimensional MXene materials,numerous preparation strategies have been proposed to enhance synthesis efficiency,mitigate environmental impact,and enable scalability for large-scale production.The compound etching approach,which relies on cationic oxidation of the A element of MAX phase precursors while anions typically adsorb onto MXene surfaces as functional groups,remains the main prevalent strategy.By contrast,synthesis methodologies utilizing elemental etching agents have been rarely reported.Here,we report a new elemental tellurium(Te)-based etching strategy for the preparation of MXene materials with tunable surface chemistry.By selectively removing the A-site element in MAX phases using Te,our approach avoids the use of toxic fluoride reagents and achieves tellurium-terminated surface groups that significantly enhance sodium storage performance.Experimental results show that Te-etched MXene delivers substantially higher capacities(exceeding 50%improvement over conventionally etched MXene)with superior rate capability,retaining high capacity at large current densities and demonstrating over 90%capacity retention after 1000 cycles.This innovative synthetic strategy provides new insight into controllable MXene preparation and performance optimization,while the as-obtained materials hold promises for high-performance sodium-ion batteries and other energy storage systems.
基金supported by the German Research Foundation(DFG), the State of Baden-Württemberg, and the University(TH) of Karlsruhe
文摘In the past decades, the necessity for detailed earthquake microzonation studies was recognized worldwide. Therefore, different approaches were established and applied. Unfortunately, the majority of these approaches are not based on pre-existing field data but require extensive seismic measurements and investigations. Furthermore, these approaches incorporate non-linearity inadequately and cannot take groundwater level changes into account. For this purpose, notably numerical models are most suitable. These models require a good knowledge of the local geological conditions （especially of the uppermost unconsolidated units）, information about the geotechnical parameters of these units, and a hydrogeological model of the investigated area. Most of this information can be obtained from geotechnical investigations and surveys that have already been carried out in most densely populated areas. In a case study for Bucharest City, non-linear analyses were performed using software that is based on the visco-hypoplastic constitutive law. The results indicate that groundwater level changes have an important influence on duration and amplitude of ground response and thus should be considered for seismic microzonation studies. This approach ean be used to display site effects and to identify different microzones taking different earthquake magnitudes and groundwater levels into account.
基金Project supported by the Department of Science and Technology(DST),Govt.of India
文摘CeO2/TiO2 composite nanoparticles with different Ce/Ti molar ratios have been successfully synthesized via sol-gel method. It was found that the band gap of the nanocomposite is tunable by varying Ce/Ti content. The nonlinear response of the sample was studied by using the nanosecond laser pulses from a Q switched Nd：Yag laser employing the Z-scan method. Open aperture Z-scan experiment revealed that with the increase in the CeO2 amount in the nanocomposite, the non-linearity of the composite increases, and it was assumed that this could be due to the modification of TiO2 dipole symmetry by the addition of CeO2. Closed aperture Z-scan experiment showed that when the CeO2 amount increases, positive nonlinear refraction decreases, and this could be attributed to the increase in the two photon absorption which subsequently suppresses the nonlinear refraction.
基金Supported by National Key Research and Development Program of China(2021YFB3601403)National Natural Science Foundation of China(62105181)Taishan Scholar of Shandong Province(tsqn202306014)。
文摘Lutetium oxide(Lu_(2)O_(3))is recognized as a potential laser crystal material,and it is noted for its high ther⁃mal conductivity,low phonon energy,and strong crystal field.Nevertheless,its high melting point of 2450℃induces significant temperature gradients,resulting in a proliferation of defects.The scarcity of comprehensive research on this crystal’s defects hinders the enhancement of crystal quality.In this study,we employed the chemical etching method to examine the etching effects on Lu_(2)O_(3)crystals under various conditions and to identify the optimal conditions for investi⁃gating the dislocation defects of Lu_(2)O_(3)crystals(mass fraction 70%H3PO4,160℃,15-18 min).The morphologies of dislocation etch pits on the(111)-and(110)-oriented Lu_(2)O_(3)wafers were characterized using microscopy,scanning electron microscopy and atomic force microscopy.This research addresses the gap in understanding Lu_(2)O_(3)line defects and offers guidance for optimizing the crystal growth process and improving crystal quality.
基金supported by the National Natural Science Foundation of China(52375437,52035009)the Natural Science Foundation of Guangdong Province(2024B1515020027)+2 种基金the Shenzhen Science and Technology Program(Grant No.KQTD20170810110250357)for the financial supportthe assistance of SUSTech Core Research Facilitiessupported by Shenzhen Engineering Research Center for Semiconductorspecific Equipment。
文摘The highly efficient manufacturing of atomic-scale smooth β-Ga_(2)O_(3)surface is fairly challenging because β-Ga_(2)O_(3)is a typical difficult-to-machine material.In this study,a novel plasma dry etching method named plasma-based atom-selective etching(PASE)is proposed to achieve the highly efficient,atomic-scale,and damage-free polishing of β-Ga_(2)O_(3).The plasma is excited through the inductive coupling principle and carbon tetrafluoride is utilized as the main reaction gas to etch β-Ga_(2)O_(3).The core of PASE polishing of β-Ga_(2)O_(3)is the remarkable lateral etching effect,which is ensured by both the intrinsic property of the surface and the extrinsic temperature condition.As revealed by density functional theory-based calculations,the intrinsic difference in the etching energy barrier of atoms at the step edge(2.36 eV)and in the terrace plane(4.37 eV)determines their difference in the etching rate,and their etching rate difference can be greatly enlarged by increasing the extrinsic temperature.The polishing of β-Ga_(2)O_(3)based on the lateral etching effect is further verified in the etching experiments.The Sa roughness of β-Ga_(2)O_(3)(001)substrate is reduced from 14.8 nm to 0.057 nm within 120 s,and the corresponding material removal rate reaches up to 20.96μm·min^(−1).The polished β-Ga_(2)O_(3)displays significantly improved crystalline quality and photoluminescence intensity,and the polishing effect of PASE is independent of the crystal face of β-Ga_(2)O_(3).In addition,the competition between chemical etching and physical reconstruction,which is determined by temperature and greatly affects the surface state of β-Ga_(2)O_(3),is deeply studied for the first time.These findings not only demonstrate the high-efficiency and high-quality polishing of β-Ga_(2)O_(3)via atmospheric plasma etching but also hold significant implications for guiding future plasma-based surface manufacturing of β-Ga_(2)O_(3).
文摘A gyro-stabilizer is the interesting system that it can apply to marine vessels for diminishes roll motion.Today it has potentially light weight with no hydrodynamics drag and effective at zero forward speed.The twin-gyroscope was chosen.Almost,the modelling for designing the system use linear model that it might not comprehensive mission requirement such as high sea condition.The non-linearity analysis was proved by comparison the results between linear and non-linear model of gyro-stabilizer throughout frequency domain also same wave input,constrains and limitations.Moreover,they were cross checked by simulating in time domain.The comparison of interested of linear and non-linear close loop model in frequency domain has demonstrated the similar characteristics but gave different values at same frequency obviously.The results were confirmed again by simulation in irregular beam sea on time domain and they demonstrate the difference of behavior of both systems while the gyro-stabilizers are switching on and off.From the resulting analysis,the non-linear gyro-stabilizer model gives more real results that correspond to more accuracy in a designing gyro-stabilizer control system for various amplitudes and frequencies operating condition especially high sea condition.
文摘A new type of 785 nm semiconductor laser device has been proposed.The thin cladding and mode expansion layer structure incorporated into the epitaxy on the p-side significantly impacts the regulation of grating etching depth.Thinning of the p-side waveguide layer makes the light field bias to the n-side cladding layer.By coordinating the confinement effect of the cladding layer,the light confinement factor on the p-side is regulated.On the other hand,the introduction of a mode expansion layer facilitates the expansion of the mode profile on the p side cladding layer.Both these factors contribute positively to reducing the grating etching depth.Compared to the reported epitaxial structures of symmetric waveguides,the new structure significantly reduces the etching depth of the grating while ensuring adequate reflection intensity and maintaining resonance.Moreover,to improve the output performance of the device,the new epitaxial structure has been optimized.Based on the traditional epitaxial structure,an energy release layer and an electron blocking layer are added to improve the electronic recombination efficiency.This improved structure has an output performance comparable to that of a symmetric waveguide,despite being able to have a smaller gain area.
文摘The low porosity and low permeability of shale remain the primary challenges in shale gas exploitation.Traditional single permeability enhancement techniques have shown limited efficacy,failing to effectively address these technical bottlenecks.This study investigates the synergistic effects of perforationinduced permeability enhancement and acidizing operations on the mechanical properties and micropore structure of shale.The improved Split Hopkinson Pressure Bar(SHPB)technique was employed to simulate dynamic impact damage under triaxial stress conditions.Damaged and undamaged rock specimens were immersed in a 15%hydrochloric acid solution to fabricate combined-damage specimens and acid-etched specimens with varying damage states.Uniaxial compression tests,X-ray diffraction(XRD)analysis,and scanning electron microscopy(SEM)were conducted on these specimens.SEM images were binarized,and combined with low-temperature nitrogen adsorption tests,the effects of different damage states on the mechanical behavior,energy dissipation,micro-morphology,and pore characteristics of shale were systematically evaluated.Results demonstrate that the peak stress and elastic modulus of shale exhibit a negative correlation with acid-etching duration.The mechanical properties of combined-damage specimens are inferior to those of pure acid-etched specimens,with the minimum peak stress reaching 147.10 MPa—a 43.53%reduction compared to untreated specimens.The energy dissipation ratio significantly increases,with a maximum value of 34.74%.XRD analysis reveals that prolonged acid immersion effectively reduces the carbonate content in specimens,while composite treatment accelerates the reaction between rock matrix and acid solution.Microstructural characterization indicates that acid etching enhances the porosity of shale,particularly the area of mesopores and macropores,with more pronounced pore development and a fragmented interface structure.These findings deepen the understanding of physical mechanisms during shale gas extraction and provide critical theoretical support for optimizing integrated permeability enhancement technologies.
基金the financial support of the National Natural Science Foundation of China(Nos.22308296)。
文摘Metal-organic frameworks(MOFs)have emerged as promising materials owing to their high surface areas,tunable pore sizes,and diverse functionalities.However,their practical deployment is frequently hindered by intrinsic microporosity and structural fragility.In this review,we systematically analyze recent advancements in MOF etching techniques,which strategically modify framework architectures to enhance mass transport,expose active sites,and improve stability.The discussion encompasses a range of methods―including acid,base,ion,solvent,steam,selective,in-situ,pyrolysis,and physical etching―with emphasis on the underlying mechanisms that govern the formation of hierarchical pore structures,defect engineering,and heterojunction formation.Notably,etching approaches facilitate precise control over crystal morphology and surface chemistry,thereby optimizing MOF performance in catalysis,electrocatalysis,photocatalysis,adsorption,energy storage,sensing,and biomedical applications.We also outline challenges such as etchant toxicity,over-etching risks,and scalability,while highlighting emerging strategies and computational simulations to refine the etching process.Ultimately,this review underscores the transformative impact of etching on MOF properties,paving the way for the design of next-generation multifunctional materials that address critical issues in environmental remediation,energy conversion,and beyond.
基金ISRO-RESPOND GAP3332 and PMN-MOES GAP2175 Project support this work.NIO-PMN and MOES-NCPOR supported the deep-sea and Antarctica micrometeorite collections,respectively.
文摘Extraterrestrial phenomena have influenced Earth’s processes throughout geological history.Evaluating the impact of extraterrestrial material on the environment is crucial for understanding the evolution of Earth and life.This study incorporates the investigation of micrometeorites(MMs),abundant cosmic materials on Earth,to understand their influence on the chemical composition and biogeochemistry of the ocean.Comprehensive etching and flux analyses reveal that∼95%of cosmic spherules(CSs)entering seawater are etched or wholly dissolved,supplying nutrients to phytoplankton.Barred spherules show the highest degree of etching(∼19%),followed by porphyritic(∼17%),glass(∼15%),cryptocrystalline(∼12%),scoriaceous(∼10%),G-type(∼9%),and I-type(∼6%).Annually,∼3080 tonnes(t)of olivine from MMs dissolve into seawater,contributing∼495 t of Mg^(2+),∼1110 t of Fe^(2+),and∼1928 t of silicic acid.This signifies that over the Indian Ocean’s∼40 Myr history,∼23 Gt of olivine from CSs has dissolved,providing nutrients to seawater and sequestering∼7 Gt of CO_(2).The world ocean during this time has sequestered∼35 Gt of CO_(2),with fluctuations influenced by extraterrestrial activity.For instance,the Veritas event,lasting∼1.5 Myr,sequestered∼6 Gt of CO_(2)from the atmosphere.A robust flux calculation based on∼2 t of deep-sea sediments from 3610 MMs provides a more accurate estimate of the time-averaged flux of∼229 t yr^(−1).These comprehensive analyses reveal MM’s original characteristics,post-deposition processes,geological record and their overall impact on Earth’s marine environments,thereby contributing to our knowledge of the interconnection between terrestrial and extraterrestrial processes.
文摘This opinion article discusses the original research work of Yünkül et al.(the Authors)published in the Journal of Mountain Science 21(9):3108–3122.Employing non-linear regression,fuzzy logic and artificial neural network modeling techniques,the Authors interrogated a large database assembled from the existing research literature to assess the performance of twelve equation rules in predicting the undrained shear strength(s_(u))mobilized for remolded fine-grained soils at different values of liquidity index(I_(L))and water content ratio.Based on their analyses,the Authors proposed a simple and reportedly reliable correlation(i.e.,Eq.9 in their paper)for predicting s_(u) over the I_(L) range of 0.15 to 3.00.This article describes various shortcomings in the Authors’assembled database(including potentially anomalous data and covering an excessively wide I_(L) range in relation to routine geotechnical and transportation engineering applications)and their proposed s_(u)=f(I_(L))correlation.Contrary to the Authors’assertions,their proposed correlation is not reliable for fine-grained soils with consistencies in the general firm to stiff range(i.e.,for 0.15<I_(L)<0.40),increasingly overestimating s_(u) for reducing I_(L),and eventually predicting s_(u)→+∞for I_(L)→0.15+(while producing mathematically undefined s_(u) for I_(L)<0.15),thus rendering their correlation unconservative and potentially leading to unsafe geotechnical designs.Exponential or regular-power type s_(u)=f(I_(L))models are more s_(u)itable when developing correlations that are applicable over the full plastic range(of 0<I_(L)<1),thereby providing reasonably conservative s_(u) predictions for use in the preliminary design for routine geotechnical engineering applications.
基金Supported by National Natural Science Foundation of China(Grant No.11872033)Beijing Municipal Natural Science Foundation(Grant No.3172017)。
文摘Many experiments have supported the contact models,such as the GW and MB models,but the majority of previous validations have been performed under light loads,resulting in a linear relationship between normal force and contact area.However,the real contact area fraction should never equal one;there must be a limit smaller than the apparent area,implying that the real contact area cannot increase linearly indefinitely.In this paper,the real contact area between two polymethylmethacrylate(PMMA)blocks under heavy load is measured using the total reflection method,and the contact area is analyzed using the image processing method.The results show that the real contact area increases with normal load linearly in light loads but non-linearly in heavy loads;the number of contact spots increases with load linearly in light loads but also non-linearly in heavy loads,synchronous with the change in the real contact area.The GW,MB,and Zhao,Maietta,and Chang(ZMC)models were used to predict the experiment results,but none of them predicted the non-linear stage.A revised GW model based on the bulk deformation hypothesis performs better in predicting the non-linear stage.The study’s findings can be applied to PMMA or other similar materials,and they can serve as a useful reference for future research on the contact mechanisms of other materials.
基金financially supported by the National Natural Science Foundation of China(Nos.52074078 and 52374327)the Applied Fundamental Research Program of Liaoning Province(No.2023JH2/101600002)+5 种基金the Liaoning Provincial Natural Science Foundation of China(No.2022-YQ-09)the Shenyang Young Middle-Aged Scientific and Technological Innovation Talent Support Program,China(No.RC220491)the Liaoning Province Steel Industry-University-Research Innovation Alliance Cooperation Project of Bensteel Group,China(No.KJBLM202202)the Fundamental Research Funds for the Central Universities,China(Nos.N2201023 and N2325009)the Key Scientific Research Project of Liaoning Provincial Department of Education(2024JYTZD-03)the 111 Project(B16009).
文摘FeCl_(3) solution is commonly used in the etching process of stainless steel.The typical etching waste liquid contains a significant amount of Fe^(3+),Fe^(2+),Cr^(3+),and Ni^(2+),making it difficult to reuse and posing pollution issues.The FeCl_(3) etching waste liquid was the present subject,which aimed to extract Cr^(3+)and Ni^(2+)by selectively adjusting process parameters.Additionally,it investigates the migration behavior and phase transition mechanisms of the iron,chromium,and nickel in different solution systems during treatment,systematically elucidating the regeneration mechanisms of FeCl_(3) etching waste liquid.The results indicate that Cr and Ni can be recycled by controlling parameters such as pH value,temperature,and the valence states of the ions.Following a selective reduction of Fe^(3+)to Fe^(2+)using Fe powder,98.3%of Cr^(3+)was recovered by adjusting the solution’s pH.Subsequently,93.3%of Ni^(2+)was extracted from the Cr-depleted solution through further adjustments to the process parameters.The recovered Cr and Ni can be used to prepare Fe–Cr and Fe–Ni alloy powders.Furthermore,the FeCl_(3) etching solution was regenerated by oxidizing Fe^(2+)and recovering impurities.The theoretical support for the development of new processes for treating FeCl_(3) etching waste liquid is provided.
基金financially supported by the National Natural Science Foundation of China(No.61904073)Spring City Plan-Special Program for Young Talents(No.K202005007)+2 种基金Yunnan Talents Support Plan for Yong Talents(No.XDYC-QNRC-2022-0482)Yunnan Local Colleges Applied Basic Research Projects(No.202101BA070001-138)Frontier Research Team of Kunming University 2023.
文摘Germanium(Ge)-air battery,a new type of semiconductor-air battery,has garnered increasing attention owing to its environmental friendliness,safety,and excellent dynamic performance.However,the flat Ge anode is prone to passivation,owing to GeO_(2) accumulation on its surface,resulting in premature discharge termination.In this study,various nano-Ge pyramid structures(GePS)were prepared using chemical etching(CE)and metal-assisted chemical etching(MACE)methods to enhance the specific surface area of the Ge anode,thereby facilitating the dissolution of the passivation layer.This study revealed that the MACE method significantly accelerated the etching rate of the Ge surface,producing exceptional GePS.Furthermore,Ge-air batteries employing Ge anodes prepared using MACE demonstrated an exceptional discharge life of up to 9240 h(385 days).The peak power density reached 3.03mW/cm^(2),representing improvements of more than 2 times and 1.8 times,respectively,compared with batteries using flat Ge anodes.This study presents a straightforward approach to enhance Ge anode performance,thereby expanding the potential applications of Ge-air batteries.
基金supported by the National Natural Science Foundation of China(52203257)Natural Science Foundation of Heilongjiang Province(YQ2022B008).
文摘Bimetallic oxides are promising electrocatalysts due to their rich composition,facile synthesis,and favorable stability under oxidizing conditions.This paper innovatively proposes a strategy aimed at constructing a one-dimensional heterostructure(Fe–NiO/NiMoO_(4) nanoparticles/nanofibers).The strategy commences with the meticulous treatment of NiMoO_(4) nanofibers,utilizing in situ etching techniques to induce the formation of Prussian Blue Analog compounds.In this process,[Fe(CN)_(6)]^(3-)anions react with the NiMoO_(4) host layer to form a steady NiFe PBA.Subsequently,the surface/interface reconstituted NiMoO_(4) nanofibers undergo direct oxidation,leading to a reconfiguration of the surface structure and the formation of a unique Fe–NiO/NiMoO_(4) one-dimensional heterostructure.The catalyst showed markedly enhanced electrocatalytic performance for the oxygen evolution reaction.Density functional theory results reveal that the incorporation of Fe as a dopant dramatically reduces the Gibbs free energy associated with the rate-determining step in the oxygen evolution reaction pathway.This pivotal transformation directly lowers the activation energy barrier,thereby significantly enhancing electron transfer efficiency.
基金This work was supported by the Youth Project of Hunan Provincial Department of Education(Grant No.22B0334)the Bridge and Tunnel Engineering Innovation Project of Changsha University of Science&Technology(Grant No.11ZDXK11)and the Practical Innovation and Entrepreneurship Capacity Improvement Plan of Changsha University of Science and Technology(Grant No.CLSJCX23029).
文摘Organisms have evolved a strain limiting mechanism,reflected as a non-linear elastic constitutive,to prevent large deformations from threatening soft tissue integrity.Compared with linear elastic substrates,the wrinkle of films on non-linear elastic substrates has received less attention.In this article,a unique wrinkle evolution of the film-substrate system with a J-shaped non-linear stress-strain relation is reported.The result shows that a concave hexagonal array pattern is formed with the shrinkage strain of the film-substrate systems developing.As the interconnection of hexagonal arrays,a unit cell ridge network appears with properties such as chirality and helix.The subparagraph maze pattern formed with high compression is mainly composed of special single-cell ridge networks such as spiral single cores,chiral double cores,and combined multi-cores.This evolutionary model is highly consistent with the results of experiments,and it also predicts wrinkle morphology that has not yet been reported.These findings can serve as a novel explanation for the surface wrinkle of biological soft tissue,as well as provide references for the preparation of artificial biomaterials and programmable soft matter.
基金the National Natural Science Foundation of China(Nos.22376178,22322606,22276105)the National Key Research and Development Program of China(No.2022YFC3704300)the Beijing Natural Science Foundation(No.8222054).
文摘Perovskite oxides have been widely applied as an effective catalyst in heterogeneous catalysis.However,the rational design of active catalysts has been restricted by the lack of understanding of the electronic structure.The correlations between surface properties and bulk electronic structure have been ignored.Herein,a simple handler of LaFeO_(3)with diluted HNO3 was employed to tune the electronic structure and catalytic properties.Experimental analysis and theoretical calculations elucidate that acid etching could raise the Fe valence and enhance Fe-O covalency in the octahedral structure,thereby lessening charge transfer energy.Enhanced Fe-O covalency could lower oxygen vacancy formation energy and enhance oxygen mobility.In-situ DRIFTS results indicated the inherent adsorption capability of Toluene and CO molecules has been greatly improved owing to higher Fe-O covalency.As compared,the catalysts after acid etching exhibited higher catalytic activity,and the T_(90)had a great reduction of 45 and 58℃ for toluene and CO oxidation,respectively.A deeper understanding of electronic structure in perovskite oxides may inspire the design of high-performance catalysts.
基金the National Natural Science Foundation of China(No.61871133)the Natural Science Foundation of Fujian Province(No.2021J01587)。
文摘Aimed at the doubly near-far problems in a large range suffered by the remote user group and in a small range existing in both nearby and remote user groups during energy harvesting and computation offloading,a resource allocation method for unmanned aerial vehicle(UAV)-assisted and user cooperation non-linear energy harvesting mobile edge computing(MEC)system is proposed.The UAV equipped with an MEC server is introduced to provide energy and computing services for the remote user group to alleviate the doubly near-far problem in a large range suffered by the remote user group.The doubly near-far problem in a small range existing in both nearby and remote user groups is mitigated by user cooperation.The specific user cooperation strategy is that the user near the base station or the UAV is used as a relay to transfer the computing task of the user far from the base station or the UAV to the MEC server for computing.By jointly optimizing users’offloading time,users’transmitting power,and the hovering position of the UAV,the resource allocation problem is modeled as a nonlinear programming problem with the objective of maximizing computation efficiency.The suboptimal solution is obtained by adopting the differential evolution algorithm.Simulation results show that,compared with the resource allocation method based on genetic algorithm and the without user cooperation method,the proposed method has higher computation efficiency.
基金supported by the Nano&Material Technology Development Program through the National Research Foundation of Korea(NRF)funded by Ministry of Science and ICT(Grant No.RS-2024-00408180)by Institute for Basic Science(No.IBS-R019-G1).
文摘Two-dimensional(2D)nitride MXenes are predicted to exhibit exceptional metallic properties and high polarity;however,their synthesis remains challenging.Research has relied on traditional molten salt etching,highlighting the need for a scalable,high-purity approach.Here,we present the first solution-based synthesis of Ti_(4)N_(3)T_(x)MXene via a novel saturated salt solution(S^(3))etching technique employing alkali metal salts.By optimizing the sintering process for high-purity Ti_(4)AlN_(3)MAX and refining the S^(3)etching route,we significantly reduced the etch pit density to 1.2×10^(6)cm^(-2)and lowered the etch pit formation rate to 4%,yielding high-quality,phasepure Ti_(4)N_(3)T_(x)MXene.Our study highlights the critical role of alkali metal ions in selective A-layer removal and demonstrates the impressive electrical conductivity and electromagnetic interference shielding performance of 2D nitride MXene,setting a new benchmark for this underexplored material.These findings pave the way for advancing 2D nitride MXenes and their diverse applications.
