Most existing studies about passive radar systems are based on the already known illuminator of opportunity(IO)states.However,in practice,the receiver generally has little knowledge about the IO states.Little research...Most existing studies about passive radar systems are based on the already known illuminator of opportunity(IO)states.However,in practice,the receiver generally has little knowledge about the IO states.Little research has studied this problem.This paper analyzes the observability and estimability for passive radar systems with unknown IO states under three typical scenarios.Besides,the directions of high and low estimability with respect to various states are given.Moreover,two types of observations are taken into account.The effects of different observations on both observability and estimability are well analyzed.For the observability test,linear and nonlinear methods are considered,which proves that both tests are applicable to the system.Numerical simulations confirm the correctness of the theoretical analysis.展开更多
The orthogonal time frequency space(OTFS)modulation is a novel modulation scheme that can effectively cope with the high Doppler expansion caused by high mobility.Since it modulates data on delay-Doppler(DD)domain and...The orthogonal time frequency space(OTFS)modulation is a novel modulation scheme that can effectively cope with the high Doppler expansion caused by high mobility.Since it modulates data on delay-Doppler(DD)domain and makes full use of the sparse characteristics of DD domain,it has been widely studied to design efficient channel estimation and signal detection schemes.In this paper,we design a novel superimposed pilot pattern with transition band,which replaces the traditional embedded pilot(EP)guard zero-symbols,and perform a two-stage channel estimation.In the first stage,we fully utilize the dispersion characteristics of OTFS signal in DD domain,and use threshold decision to make coarse channel estimation.In the second stage,we use the results of the coarse estimation for iterative signal detection and accurate channel estimation.During the second stage,we make full use of the sparsity of the channel in DD domain,remodel the received signal into the form of sparse channel vector multiplied by channel coefficient matrix,and introduce Doppler index segmentation factor(DISF)to subdivide the Doppler index to solve the problem of fractional Doppler.Simulations reveal that,the scheme proposed in this paper has higher spectral efficiency compared with traditional EP scheme and lower peak-to-average power ratio(PAPR)compared with traditional superimposed pilot scheme.展开更多
The growing use of lithium-ion batteries in electric transportation and grid-scale storage systems has intensified the need for accurate and highly generalizable state-of-health(SOH)estimation.Conventional approaches ...The growing use of lithium-ion batteries in electric transportation and grid-scale storage systems has intensified the need for accurate and highly generalizable state-of-health(SOH)estimation.Conventional approaches often suffer from reduced accuracy under dynamically uncertain state-of-charge(SOC)operating ranges and heterogeneous aging stresses.This study presents a unified SOH estimation framework that integrates physics-informed modeling,subspace identification,and Transformer-based learning.A reduced-order model is derived from simplified electrochemical dynamics,providing an interpretable and computationally efficient representation of battery behavior.Subspace identification across a wide SOC and SOH range yields degradation-sensitive features,which the Transformer uses to capture long-range aging dynamics via multi-head self-attention.Experiments on LiFePO4 cells under joint-cell training show consistently accurate SOH estimation,with a maximum error of 1.39%,demonstrating the framework’s effectiveness in decoupling SOC and SOH effects.In cross-cell validation,where training and validation are performed on different cells,the model maintains a maximum error of 2.06%,confirming strong generalization to unseen aging trajectories.Comparative experiments on LiFePO_(4)and public LiCoO_(2)datasets confirm the framework’s cross-chemistry applicability.By extracting low-dimensional,physically interpretable features via subspace identification,the framework significantly reduces training cost while maintaining high SOH estimation accuracy,outperforming conventional data-driven models lacking physical guidance.展开更多
In data communication,limited communication resources often lead to measurement bias,which adversely affects subsequent system estimation if not effectively handled.This paper proposes a novel bias calibration algorit...In data communication,limited communication resources often lead to measurement bias,which adversely affects subsequent system estimation if not effectively handled.This paper proposes a novel bias calibration algorithm under communication constraints to achieve accurate system states of the interested system.An output-based event-triggered scheme is first employed to alleviate transmission burden.Accounting for the limited-communication-induced measurement bias,a novel bias calibration algorithm following the Kalman filtering line is developed to restrain the effect of the measurement bias on system estimation,thereby achieving accurate system state estimates.Subsequently,the Field Programmable Gate Array(FPGA)implementation of the proposed algorithm is also realized with the hope of providing fast bias calibration in practical scenarios.A simulation about a numerical example and a practical example(for gyroscope’s angular velocity bias calibration)on MATLAB is provided to demonstrate the feasibility and effectiveness of the proposed algorithm.展开更多
Reconfigurable intelligent surfaces(RISs)not only assist communication but also help the localization of user equipment(UE).This study focuses on indoor localization of UE with a single access point(AP)and multiple RI...Reconfigurable intelligent surfaces(RISs)not only assist communication but also help the localization of user equipment(UE).This study focuses on indoor localization of UE with a single access point(AP)and multiple RISs.First,we propose a two-stage channel estimation scheme where RIS phase shifts are tuned to obtain multiple channel soundings.In the first stage,the newtonized orthogonal matching pursuit algorithm extracts the parameters of multiple paths from the received signals.Then,the LOS path and RISreflected paths are identified.In the second stage,the estimated path gains of RIS-reflected paths with different phase shifts are utilized to determine the angle of arrival(AOA)at the RIS by obtaining the angular pseudo spectrum.Consequently,by taking the AP and RISs as reference points,the linear least squares estimator can locate UE with the estimated AOAs.Simulation results show that the proposed algorithm can realize centimeter-level localization accuracy in the discussed scenarios.Moreover,the higher accuracy of pseudo spectrum,a larger number of channel soundings,and a larger number of reference points can realize higher localization accuracy of UE.展开更多
(Quasi-)closed-form results for the statistical properties of unmanned aerial vehicle(UAV)airto-ground channels are derived for the first time using a novel spatial-vector-based method from a threedimensional(3-D)arbi...(Quasi-)closed-form results for the statistical properties of unmanned aerial vehicle(UAV)airto-ground channels are derived for the first time using a novel spatial-vector-based method from a threedimensional(3-D)arbitrary-elevation one-cylinder model.The derived results include a closed-form expression for the space-time correlation function and some quasi-closed-form ones for the space-Doppler power spectrum density,the level crossing rate,and the average fading duration,which are shown to be the generalizations of those previously obtained from the two-dimensional(2-D)one-ring model and the 3-D low-elevation one-cylinder model for terrestrial mobile-to-mobile channels.The close agreements between the theoretical results and the simulations as well as the measurements validate the utility of the derived channel statistics.Based on the derived expressions,the impacts of some parameters on the channel characteristics are investigated in an effective,efficient,and explicable way,which leads to a general guideline on the manual parameter estimation from the measurement description.展开更多
Accurate time delay estimation of target echo signals is a critical component of underwater target localization.In active sonar systems,echo signal processing is vulnerable to the effects of reverberation and noise in...Accurate time delay estimation of target echo signals is a critical component of underwater target localization.In active sonar systems,echo signal processing is vulnerable to the effects of reverberation and noise in the maritime environment.This paper proposes a novel method for estimating target time delay using multi-bright spot echoes,assuming the target’s size and depth are known.Aiming to effectively enhance the extraction of geometric features from the target echoes and mitigate the impact of reverberation and noise,the proposed approach employs the fractional order Fourier transform-frequency sliced wavelet transform to extract multi-bright spot echoes.Using the highlighting model theory and the target size information,an observation matrix is constructed to represent multi-angle incident signals and obtain the theoretical scattered echo signals from different angles.Aiming to accurately estimate the target’s time delay,waveform similarity coefficients and mean square error values between the theoretical return signals and received signals are computed across various incident angles and time delays.Simulation results show that,compared to the conventional matched filter,the proposed algorithm reduces the relative error by 65.9%-91.5%at a signal-to noise ratio of-25 dB,and by 66.7%-88.9%at a signal-to-reverberation ratio of−10 dB.This algorithm provides a new approach for the precise localization of submerged targets in shallow water environments.展开更多
AIM:To construct an intelligent segmentation scheme for precise localization of central serous chorioretinopathy(CSC)leakage points,thereby enabling ophthalmologists to deliver accurate laser treatment without navigat...AIM:To construct an intelligent segmentation scheme for precise localization of central serous chorioretinopathy(CSC)leakage points,thereby enabling ophthalmologists to deliver accurate laser treatment without navigational laser equipment.METHODS:A dataset with dual labels(point-level and pixel-level)was first established based on fundus fluorescein angiography(FFA)images of CSC and subsequently divided into training(102 images),validation(40 images),and test(40 images)datasets.An intelligent segmentation method was then developed,based on the You Only Look Once version 8 Pose Estimation(YOLOv8-Pose)model and segment anything model(SAM),to segment CSC leakage points.Next,the YOLOv8-Pose model was trained for 200 epochs,and the best-performing model was selected to form the optimal combination with SAM.Additionally,the classic five types of U-Net series models[i.e.,U-Net,recurrent residual U-Net(R2U-Net),attention U-Net(AttU-Net),recurrent residual attention U-Net(R2AttUNet),and nested U-Net(UNet^(++))]were initialized with three random seeds and trained for 200 epochs,resulting in a total of 15 baseline models for comparison.Finally,based on the metrics including Dice similarity coefficient(DICE),intersection over union(IoU),precision,recall,precisionrecall(PR)curve,and receiver operating characteristic(ROC)curve,the proposed method was compared with baseline models through quantitative and qualitative experiments for leakage point segmentation,thereby demonstrating its effectiveness.RESULTS:With the increase of training epochs,the mAP50-95,Recall,and precision of the YOLOv8-Pose model showed a significant increase and tended to stabilize,and it achieved a preliminary localization success rate of 90%(i.e.,36 images)for CSC leakage points in 40 test images.Using manually expert-annotated pixel-level labels as the ground truth,the proposed method achieved outcomes with a DICE of 57.13%,an IoU of 45.31%,a precision of 45.91%,a recall of 93.57%,an area under the PR curve(AUC-PR)of 0.78 and an area under the ROC curve(AUC-ROC)of 0.97,which enables more accurate segmentation of CSC leakage points.CONCLUSION:By combining the precise localization capability of the YOLOv8-Pose model with the robust and flexible segmentation ability of SAM,the proposed method not only demonstrates the effectiveness of the YOLOv8-Pose model in detecting keypoint coordinates of CSC leakage points from the perspective of application innovation but also establishes a novel approach for accurate segmentation of CSC leakage points through the“detect-then-segment”strategy,thereby providing a potential auxiliary means for the automatic and precise realtime localization of leakage points during traditional laser photocoagulation for CSC.展开更多
Based on monthly runoff and climate datasets spanning 2000–2024,this study employed the Theil–Sen’s slope estimation,Mann–Kendall(M–K)trend test,as well as Pearson correlation and Spearman rank correlation analys...Based on monthly runoff and climate datasets spanning 2000–2024,this study employed the Theil–Sen’s slope estimation,Mann–Kendall(M–K)trend test,as well as Pearson correlation and Spearman rank correlation analyses to systematically examine the spatiotemporal patterns of runoff and its climatic driving mechanisms across Tajikistan,providing a scientific basis for sustainable water resource utilization and management in the study area.Results indicated that during 2000–2024,the annual runoff in Tajikistan exhibited statistically non-significant long-term trend(P=0.76),while displaying pronounced seasonal variability and strong spatial heterogeneity.Spring and summer average runoff primarily exhibited slight declining tendencies,while winter average runoff exhibited pronounced reduction in localized regions,such as the Syr Darya Basin,the Vakhsh River Basin,and the lower reaches of the Zeravshan River Basin.Precipitation emerged as the dominant positive driver of runoff,exhibiting moderate to strong positive correlations across over 78.00%of the country,whereas potential evapotranspiration consistently functioned as a negative driver.Rising temperatures exerted a dual competitive effect on runoff:in high-elevation,glacier-covered regions,rising temperatures temporarily increased runoff by accelerating glacier melt;however,at the national scale,the negative impact of rising temperature on runoff has played a slightly dominant role to a certain extent by enhancing evapotranspiration.Collectively,these results indicated that the present stability of runoff in Tajikistan is strongly dependent on the short-term compensatory effects of glacier melt and the risk of future runoff decline is likely to intensify as glacier reserves continue to diminish.This study provides a critical scientific evidence to inform sustainable water resource management in Tajikistan and underscores the need for glacier conservation and integrated water resource management strategies.展开更多
Two-dimensional endoscopic images are susceptible to interferences such as specular reflections and monotonous texture illumination,hindering accurate three-dimensional lesion reconstruction by surgical robots.This st...Two-dimensional endoscopic images are susceptible to interferences such as specular reflections and monotonous texture illumination,hindering accurate three-dimensional lesion reconstruction by surgical robots.This study proposes a novel end-to-end disparity estimation model to address these challenges.Our approach combines a Pseudo-Siamese neural network architecture with pyramid dilated convolutions,integrating multi-scale image information to enhance robustness against lighting interferences.This study introduces a Pseudo-Siamese structure-based disparity regression model that simplifies left-right image comparison,improving accuracy and efficiency.The model was evaluated using a dataset of stereo endoscopic videos captured by the Da Vinci surgical robot,comprising simulated silicone heart sequences and real heart video data.Experimental results demonstrate significant improvement in the network’s resistance to lighting interference without substantially increasing parameters.Moreover,the model exhibited faster convergence during training,contributing to overall performance enhancement.This study advances endoscopic image processing accuracy and has potential implications for surgical robot applications in complex environments.展开更多
The burgeoning market for lithium-ion batteries has stimulated a growing need for more reliable battery performance monitoring. Accurate state-of-health(SOH) estimation is critical for ensuring battery operational per...The burgeoning market for lithium-ion batteries has stimulated a growing need for more reliable battery performance monitoring. Accurate state-of-health(SOH) estimation is critical for ensuring battery operational performance. Despite numerous data-driven methods reported in existing research for battery SOH estimation, these methods often exhibit inconsistent performance across different application scenarios. To address this issue and overcome the performance limitations of individual data-driven models,integrating multiple models for SOH estimation has received considerable attention. Ensemble learning(EL) typically leverages the strengths of multiple base models to achieve more robust and accurate outputs. However, the lack of a clear review of current research hinders the further development of ensemble methods in SOH estimation. Therefore, this paper comprehensively reviews multi-model ensemble learning methods for battery SOH estimation. First, existing ensemble methods are systematically categorized into 6 classes based on their combination strategies. Different realizations and underlying connections are meticulously analyzed for each category of EL methods, highlighting distinctions, innovations, and typical applications. Subsequently, these ensemble methods are comprehensively compared in terms of base models, combination strategies, and publication trends. Evaluations across 6 dimensions underscore the outstanding performance of stacking-based ensemble methods. Following this, these ensemble methods are further inspected from the perspectives of weighted ensemble and diversity, aiming to inspire potential approaches for enhancing ensemble performance. Moreover, addressing challenges such as base model selection, measuring model robustness and uncertainty, and interpretability of ensemble models in practical applications is emphasized. Finally, future research prospects are outlined, specifically noting that deep learning ensemble is poised to advance ensemble methods for battery SOH estimation. The convergence of advanced machine learning with ensemble learning is anticipated to yield valuable avenues for research. Accelerated research in ensemble learning holds promising prospects for achieving more accurate and reliable battery SOH estimation under real-world conditions.展开更多
Interference significantly impacts the performance of the Global Navigation Satellite Systems(GNSS),highlighting the need for advanced interference localization technology to bolster anti-interference and defense capa...Interference significantly impacts the performance of the Global Navigation Satellite Systems(GNSS),highlighting the need for advanced interference localization technology to bolster anti-interference and defense capabilities.The Uniform Circular Array(UCA)enables concurrent estimation of the Direction of Arrival(DOA)in both azimuth and elevation.Given the paramount importance of stability and real-time performance in interference localization,this work proposes an innovative approach to reduce the complexity and increase the robustness of the DOA estimation.The proposed method reduces computational complexity by selecting a reduced number of array elements to reconstruct a non-uniform sparse array from a UCA.To ensure DOA estimation accuracy,minimizing the Cramér-Rao Bound(CRB)is the objective,and the Spatial Correlation Coefficient(SCC)is incorporated as a constraint to mitigate side-lobe.The optimization model is a quadratic fractional model,which is solved by Semi-Definite Relaxation(SDR).When the array has perturbations,the mathematical expressions for CRB and SCC are re-derived to enhance the robustness of the reconstructed array.Simulation and hardware experiments validate the effectiveness of the proposed method in estimating interference DOA,showing high robustness and reductions in hardware and computational costs associated with DOA estimation.展开更多
Mechanical properties are critical to the quality of hot-rolled steel pipe products.Accurately understanding the relationship between rolling parameters and mechanical properties is crucial for effective prediction an...Mechanical properties are critical to the quality of hot-rolled steel pipe products.Accurately understanding the relationship between rolling parameters and mechanical properties is crucial for effective prediction and control.To address this,an industrial big data platform was developed to collect and process multi-source heterogeneous data from the entire production process,providing a complete dataset for mechanical property prediction.The adaptive bandwidth kernel density estimation(ABKDE)method was proposed to adjust bandwidth dynamically based on data density.Combining long short-term memory neural networks with ABKDE offers robust prediction interval capabilities for mechanical properties.The proposed method was deployed in a large-scale steel plant,which demonstrated superior prediction interval performance compared to lower upper bound estimation,mean variance estimation,and extreme learning machine-adaptive bandwidth kernel density estimation,achieving a prediction interval normalized average width of 0.37,a prediction interval coverage probability of 0.94,and the lowest coverage width-based criterion of 1.35.Notably,shapley additive explanations-based explanations significantly improved the proposed model’s credibility by providing a clear analysis of feature impacts.展开更多
The rapid expansion of railways,especially High-Speed Railways(HSRs),has drawn considerable interest from both academic and industrial sectors.To meet the future vision of smart rail communications,the rail transport ...The rapid expansion of railways,especially High-Speed Railways(HSRs),has drawn considerable interest from both academic and industrial sectors.To meet the future vision of smart rail communications,the rail transport industry must innovate in key technologies to ensure high-quality transmissions for passengers and railway operations.These systems must function effectively under high mobility conditions while prioritizing safety,ecofriendliness,comfort,transparency,predictability,and reliability.On the other hand,the proposal of 6 G wireless technology introduces new possibilities for innovation in communication technologies,which may truly realize the current vision of HSR.Therefore,this article gives a review of the current advanced 6 G wireless communication technologies for HSR,including random access and switching,channel estimation and beamforming,integrated sensing and communication,and edge computing.The main application scenarios of these technologies are reviewed,as well as their current research status and challenges,followed by an outlook on future development directions.展开更多
Camera Pose Estimating from point and line correspondences is critical in various applications,including robotics,augmented reality,3D reconstruction,and autonomous navigation.Existing methods,such as the Perspective-...Camera Pose Estimating from point and line correspondences is critical in various applications,including robotics,augmented reality,3D reconstruction,and autonomous navigation.Existing methods,such as the Perspective-n-Point(PnP)and Perspective-n-Line(PnL)approaches,offer limited accuracy and robustness in environments with occlusions,noise,or sparse feature data.This paper presents a unified solution,Efficient and Accurate Pose Estimation from Point and Line Correspondences(EAPnPL),combining point-based and linebased constraints to improve pose estimation accuracy and computational efficiency,particularly in low-altitude UAV navigation and obstacle avoidance.The proposed method utilizes quaternion parameterization of the rotation matrix to overcome singularity issues and address challenges in traditional rotation matrix-based formulations.A hybrid optimization framework is developed to integrate both point and line constraints,providing a more robust and stable solution in complex scenarios.The method is evaluated using synthetic and realworld datasets,demonstrating significant improvements in performance over existing techniques.The results indicate that the EAPnPL method enhances accuracy and reduces computational complexity,making it suitable for real-time applications in autonomous UAV systems.This approach offers a promising solution to the limitations of existing camera pose estimation methods,with potential applications in low-altitude navigation,autonomous robotics,and 3D scene reconstruction.展开更多
Large portions of the tunnel boring machine(TBM)construction cost are attributed to disc cutter consumption,and assessing the disc cutter's wear level can help determine the optimal time to replace the disc cutter...Large portions of the tunnel boring machine(TBM)construction cost are attributed to disc cutter consumption,and assessing the disc cutter's wear level can help determine the optimal time to replace the disc cutter.Therefore,the need to monitor disc cutter wear in real-time has emerged as a technical challenge for TBMs.In this study,real-time disc cutter wear monitoring is developed based on sound and vibration sensors.For this purpose,the microphone and accelerometer were used to record the sound and vibration signals of cutting three different types of rocks with varying abrasions on a laboratory scale.The relationship between disc cutter wear and the sound and vibration signal was determined by comparing the measurements of disc cutter wear with the signal plots for each sample.The features extracted from the signals showed that the sound and vibration signals are impacted by the progression of disc wear during the rock-cutting process.The signal features obtained from the rock-cutting operation were utilized to verify the machine learning techniques.The results showed that the multilayer perceptron(MLP),random subspace-based decision tree(RS-DT),DT,and random forest(RF)methods could predict the wear level of the disc cutter with an accuracy of 0.89,0.951,0.951,and 0.927,respectively.Based on the accuracy of the models and the confusion matrix,it was found that the RS-DT model has the best estimate for predicting the level of disc wear.This research has developed a method that can potentially determine when to replace a tool and assess disc wear in real-time.展开更多
Cyber-physical systems(CPSs)are regarded as the backbone of the fourth industrial revolution,in which communication,physical processes,and computer technology are integrated.In modern industrial systems,CPSs are widel...Cyber-physical systems(CPSs)are regarded as the backbone of the fourth industrial revolution,in which communication,physical processes,and computer technology are integrated.In modern industrial systems,CPSs are widely utilized across various domains,such as smart grids,smart healthcare systems,smart vehicles,and smart manufacturing,among others.Due to their unique spatial distribution,CPSs are highly vulnerable to cyber-attacks,which may result in severe performance degradation and even system instability.Consequently,the security concerns of CPSs have attracted significant attention in recent years.In this paper,a comprehensive survey on the security issues of CPSs under cyber-attacks is provided.Firstly,mathematical descriptions of various types of cyberattacks are introduced in detail.Secondly,two types of secure estimation and control processing schemes,including robust methods and active methods,are reviewed.Thirdly,research findings related to secure control and estimation problems for different types of CPSs are summarized.Finally,the survey is concluded by outlining the challenges and suggesting potential research directions for the future.展开更多
Developing sensorless techniques for estimating battery expansion is essential for effective mechanical state monitoring,improving the accuracy of digital twin simulation and abnormality detection.Therefore,this paper...Developing sensorless techniques for estimating battery expansion is essential for effective mechanical state monitoring,improving the accuracy of digital twin simulation and abnormality detection.Therefore,this paper presents a data-driven approach to expansion estimation using electromechanical coupled models with machine learning.The proposed method integrates reduced-order impedance models with data-driven mechanical models,coupling the electrochemical and mechanical states through the state of charge(SOC)and mechanical pressure within a state estimation framework.The coupling relationship was established through experimental insights into pressure-related impedance parameters and the nonlinear mechanical behavior with SOC and pressure.The data-driven model was interpreted by introducing a novel swelling coefficient defined by component stiffnesses to capture the nonlinear mechanical behavior across various mechanical constraints.Sensitivity analysis of the impedance model shows that updating model parameters with pressure can reduce the mean absolute error of simulated voltage by 20 mV and SOC estimation error by 2%.The results demonstrate the model's estimation capabilities,achieving a root mean square error of less than 1 kPa when the maximum expansion force is from 30 kPa to 120 kPa,outperforming calibrated stiffness models and other machine learning techniques.The model's robustness and generalizability are further supported by its effective handling of SOC estimation and pressure measurement errors.This work highlights the importance of the proposed framework in enhancing state estimation and fault diagnosis for lithium-ion batteries.展开更多
Traffic forecasting with high precision aids Intelligent Transport Systems(ITS)in formulating and optimizing traffic management strategies.The algorithms used for tuning the hyperparameters of the deep learning models...Traffic forecasting with high precision aids Intelligent Transport Systems(ITS)in formulating and optimizing traffic management strategies.The algorithms used for tuning the hyperparameters of the deep learning models often have accurate results at the expense of high computational complexity.To address this problem,this paper uses the Tree-structured Parzen Estimator(TPE)to tune the hyperparameters of the Long Short-term Memory(LSTM)deep learning framework.The Tree-structured Parzen Estimator(TPE)uses a probabilistic approach with an adaptive searching mechanism by classifying the objective function values into good and bad samples.This ensures fast convergence in tuning the hyperparameter values in the deep learning model for performing prediction while still maintaining a certain degree of accuracy.It also overcomes the problem of converging to local optima and avoids timeconsuming random search and,therefore,avoids high computational complexity in prediction accuracy.The proposed scheme first performs data smoothing and normalization on the input data,which is then fed to the input of the TPE for tuning the hyperparameters.The traffic data is then input to the LSTM model with tuned parameters to perform the traffic prediction.The three optimizers:Adaptive Moment Estimation(Adam),Root Mean Square Propagation(RMSProp),and Stochastic Gradient Descend with Momentum(SGDM)are also evaluated for accuracy prediction and the best optimizer is then chosen for final traffic prediction in TPE-LSTM model.Simulation results verify the effectiveness of the proposed model in terms of accuracy of prediction over the benchmark schemes.展开更多
A new method based on the iterative adaptive algorithm(IAA)and blocking matrix preprocessing(BMP)is proposed to study the suppression of multi-mainlobe interference.The algorithm is applied to precisely estimate the s...A new method based on the iterative adaptive algorithm(IAA)and blocking matrix preprocessing(BMP)is proposed to study the suppression of multi-mainlobe interference.The algorithm is applied to precisely estimate the spatial spectrum and the directions of arrival(DOA)of interferences to overcome the drawbacks associated with conventional adaptive beamforming(ABF)methods.The mainlobe interferences are identified by calculating the correlation coefficients between direction steering vectors(SVs)and rejected by the BMP pretreatment.Then,IAA is subsequently employed to reconstruct a sidelobe interference-plus-noise covariance matrix for the preferable ABF and residual interference suppression.Simulation results demonstrate the excellence of the proposed method over normal methods based on BMP and eigen-projection matrix perprocessing(EMP)under both uncorrelated and coherent circumstances.展开更多
基金This work was supported by the National Natural Science Foundation of China(61803379)the China Postdoctoral Science Foundation(2017M613370,2018T111129).
文摘Most existing studies about passive radar systems are based on the already known illuminator of opportunity(IO)states.However,in practice,the receiver generally has little knowledge about the IO states.Little research has studied this problem.This paper analyzes the observability and estimability for passive radar systems with unknown IO states under three typical scenarios.Besides,the directions of high and low estimability with respect to various states are given.Moreover,two types of observations are taken into account.The effects of different observations on both observability and estimability are well analyzed.For the observability test,linear and nonlinear methods are considered,which proves that both tests are applicable to the system.Numerical simulations confirm the correctness of the theoretical analysis.
基金supported by National Natural Science Foundation(NNSF)of China under Grant 62001351the Foundation of National Key Laboratory of Electromagnetic Environment(6142403220202)the Stability Support Fund for Basic Military Industrial Research Institutes(A240104130).
文摘The orthogonal time frequency space(OTFS)modulation is a novel modulation scheme that can effectively cope with the high Doppler expansion caused by high mobility.Since it modulates data on delay-Doppler(DD)domain and makes full use of the sparse characteristics of DD domain,it has been widely studied to design efficient channel estimation and signal detection schemes.In this paper,we design a novel superimposed pilot pattern with transition band,which replaces the traditional embedded pilot(EP)guard zero-symbols,and perform a two-stage channel estimation.In the first stage,we fully utilize the dispersion characteristics of OTFS signal in DD domain,and use threshold decision to make coarse channel estimation.In the second stage,we use the results of the coarse estimation for iterative signal detection and accurate channel estimation.During the second stage,we make full use of the sparsity of the channel in DD domain,remodel the received signal into the form of sparse channel vector multiplied by channel coefficient matrix,and introduce Doppler index segmentation factor(DISF)to subdivide the Doppler index to solve the problem of fractional Doppler.Simulations reveal that,the scheme proposed in this paper has higher spectral efficiency compared with traditional EP scheme and lower peak-to-average power ratio(PAPR)compared with traditional superimposed pilot scheme.
基金supported by the National Natural Science Foundation of China(No.52207228)the Beijing Natural Science Foundation,China(No.3224070)the National Natural Science Foundation of China(No.52077208).
文摘The growing use of lithium-ion batteries in electric transportation and grid-scale storage systems has intensified the need for accurate and highly generalizable state-of-health(SOH)estimation.Conventional approaches often suffer from reduced accuracy under dynamically uncertain state-of-charge(SOC)operating ranges and heterogeneous aging stresses.This study presents a unified SOH estimation framework that integrates physics-informed modeling,subspace identification,and Transformer-based learning.A reduced-order model is derived from simplified electrochemical dynamics,providing an interpretable and computationally efficient representation of battery behavior.Subspace identification across a wide SOC and SOH range yields degradation-sensitive features,which the Transformer uses to capture long-range aging dynamics via multi-head self-attention.Experiments on LiFePO4 cells under joint-cell training show consistently accurate SOH estimation,with a maximum error of 1.39%,demonstrating the framework’s effectiveness in decoupling SOC and SOH effects.In cross-cell validation,where training and validation are performed on different cells,the model maintains a maximum error of 2.06%,confirming strong generalization to unseen aging trajectories.Comparative experiments on LiFePO_(4)and public LiCoO_(2)datasets confirm the framework’s cross-chemistry applicability.By extracting low-dimensional,physically interpretable features via subspace identification,the framework significantly reduces training cost while maintaining high SOH estimation accuracy,outperforming conventional data-driven models lacking physical guidance.
基金support from the National Natural Science Foundation of China(Grant Nos.U2330206,U2230206,62173068)Sichuan Science and Technology Program(Grants Nos.2024NSFSC1483,2024ZYD0156,2023NSFC1962,DQ202412).
文摘In data communication,limited communication resources often lead to measurement bias,which adversely affects subsequent system estimation if not effectively handled.This paper proposes a novel bias calibration algorithm under communication constraints to achieve accurate system states of the interested system.An output-based event-triggered scheme is first employed to alleviate transmission burden.Accounting for the limited-communication-induced measurement bias,a novel bias calibration algorithm following the Kalman filtering line is developed to restrain the effect of the measurement bias on system estimation,thereby achieving accurate system state estimates.Subsequently,the Field Programmable Gate Array(FPGA)implementation of the proposed algorithm is also realized with the hope of providing fast bias calibration in practical scenarios.A simulation about a numerical example and a practical example(for gyroscope’s angular velocity bias calibration)on MATLAB is provided to demonstrate the feasibility and effectiveness of the proposed algorithm.
基金supported in part by the Fundamental Research Funds for the Central Universities under Grant 2242022k60004in part by the National Natural Science Foundation of China(NSFC)under Grants 62261160576,624B2036,W2421087,62422105+1 种基金in part by the Young Elite Scientists Sponsorship Program by CAST 2022QNRC001,and the“Zhishan”Scholars Programs of Southeast Universityin part by the Key Technologies R&D Program of Jiangsu(Prospective and Key Technologies for Industry)under Grants BE2023022,BE2023022-1 and BE2023022-2.
文摘Reconfigurable intelligent surfaces(RISs)not only assist communication but also help the localization of user equipment(UE).This study focuses on indoor localization of UE with a single access point(AP)and multiple RISs.First,we propose a two-stage channel estimation scheme where RIS phase shifts are tuned to obtain multiple channel soundings.In the first stage,the newtonized orthogonal matching pursuit algorithm extracts the parameters of multiple paths from the received signals.Then,the LOS path and RISreflected paths are identified.In the second stage,the estimated path gains of RIS-reflected paths with different phase shifts are utilized to determine the angle of arrival(AOA)at the RIS by obtaining the angular pseudo spectrum.Consequently,by taking the AP and RISs as reference points,the linear least squares estimator can locate UE with the estimated AOAs.Simulation results show that the proposed algorithm can realize centimeter-level localization accuracy in the discussed scenarios.Moreover,the higher accuracy of pseudo spectrum,a larger number of channel soundings,and a larger number of reference points can realize higher localization accuracy of UE.
基金supported in part by the National Key Research and Development Program of China(2021YFB2900501)in part by the Shaanxi Science and Technology Innovation Team(2023-CX-TD-03)+3 种基金in part by the Science and Technology Program of Shaanxi Province(2021GXLH-Z-038)in part by the Natural Science Foundation of Hunan Province(2023JJ40607 and 2023JJ50045)in part by the Scientific Research Foundation of Hunan Provincial Education Department(23B0713 and 24B0603)in part by the National Natural Science Foundation of China(62401371,62101275,and 62372070).
文摘(Quasi-)closed-form results for the statistical properties of unmanned aerial vehicle(UAV)airto-ground channels are derived for the first time using a novel spatial-vector-based method from a threedimensional(3-D)arbitrary-elevation one-cylinder model.The derived results include a closed-form expression for the space-time correlation function and some quasi-closed-form ones for the space-Doppler power spectrum density,the level crossing rate,and the average fading duration,which are shown to be the generalizations of those previously obtained from the two-dimensional(2-D)one-ring model and the 3-D low-elevation one-cylinder model for terrestrial mobile-to-mobile channels.The close agreements between the theoretical results and the simulations as well as the measurements validate the utility of the derived channel statistics.Based on the derived expressions,the impacts of some parameters on the channel characteristics are investigated in an effective,efficient,and explicable way,which leads to a general guideline on the manual parameter estimation from the measurement description.
基金Supported by the State Key Laboratory of Acoustics and Marine Information Chinese Academy of Sciences(SKL A202507).
文摘Accurate time delay estimation of target echo signals is a critical component of underwater target localization.In active sonar systems,echo signal processing is vulnerable to the effects of reverberation and noise in the maritime environment.This paper proposes a novel method for estimating target time delay using multi-bright spot echoes,assuming the target’s size and depth are known.Aiming to effectively enhance the extraction of geometric features from the target echoes and mitigate the impact of reverberation and noise,the proposed approach employs the fractional order Fourier transform-frequency sliced wavelet transform to extract multi-bright spot echoes.Using the highlighting model theory and the target size information,an observation matrix is constructed to represent multi-angle incident signals and obtain the theoretical scattered echo signals from different angles.Aiming to accurately estimate the target’s time delay,waveform similarity coefficients and mean square error values between the theoretical return signals and received signals are computed across various incident angles and time delays.Simulation results show that,compared to the conventional matched filter,the proposed algorithm reduces the relative error by 65.9%-91.5%at a signal-to noise ratio of-25 dB,and by 66.7%-88.9%at a signal-to-reverberation ratio of−10 dB.This algorithm provides a new approach for the precise localization of submerged targets in shallow water environments.
基金Supported by the Shenzhen Science and Technology Program(No.JCYJ20240813152704006)the National Natural Science Foundation of China(No.62401259)+2 种基金the Fundamental Research Funds for the Central Universities(No.NZ2024036)the Postdoctoral Fellowship Program of CPSF(No.GZC20242228)High Performance Computing Platform of Nanjing University of Aeronautics and Astronautics。
文摘AIM:To construct an intelligent segmentation scheme for precise localization of central serous chorioretinopathy(CSC)leakage points,thereby enabling ophthalmologists to deliver accurate laser treatment without navigational laser equipment.METHODS:A dataset with dual labels(point-level and pixel-level)was first established based on fundus fluorescein angiography(FFA)images of CSC and subsequently divided into training(102 images),validation(40 images),and test(40 images)datasets.An intelligent segmentation method was then developed,based on the You Only Look Once version 8 Pose Estimation(YOLOv8-Pose)model and segment anything model(SAM),to segment CSC leakage points.Next,the YOLOv8-Pose model was trained for 200 epochs,and the best-performing model was selected to form the optimal combination with SAM.Additionally,the classic five types of U-Net series models[i.e.,U-Net,recurrent residual U-Net(R2U-Net),attention U-Net(AttU-Net),recurrent residual attention U-Net(R2AttUNet),and nested U-Net(UNet^(++))]were initialized with three random seeds and trained for 200 epochs,resulting in a total of 15 baseline models for comparison.Finally,based on the metrics including Dice similarity coefficient(DICE),intersection over union(IoU),precision,recall,precisionrecall(PR)curve,and receiver operating characteristic(ROC)curve,the proposed method was compared with baseline models through quantitative and qualitative experiments for leakage point segmentation,thereby demonstrating its effectiveness.RESULTS:With the increase of training epochs,the mAP50-95,Recall,and precision of the YOLOv8-Pose model showed a significant increase and tended to stabilize,and it achieved a preliminary localization success rate of 90%(i.e.,36 images)for CSC leakage points in 40 test images.Using manually expert-annotated pixel-level labels as the ground truth,the proposed method achieved outcomes with a DICE of 57.13%,an IoU of 45.31%,a precision of 45.91%,a recall of 93.57%,an area under the PR curve(AUC-PR)of 0.78 and an area under the ROC curve(AUC-ROC)of 0.97,which enables more accurate segmentation of CSC leakage points.CONCLUSION:By combining the precise localization capability of the YOLOv8-Pose model with the robust and flexible segmentation ability of SAM,the proposed method not only demonstrates the effectiveness of the YOLOv8-Pose model in detecting keypoint coordinates of CSC leakage points from the perspective of application innovation but also establishes a novel approach for accurate segmentation of CSC leakage points through the“detect-then-segment”strategy,thereby providing a potential auxiliary means for the automatic and precise realtime localization of leakage points during traditional laser photocoagulation for CSC.
基金funded by the Strategic Priority Research Program of the Chinese Academy of Sciences(XDB0720203)the National Key Research and Development Program of China(2023YFF0805603).
文摘Based on monthly runoff and climate datasets spanning 2000–2024,this study employed the Theil–Sen’s slope estimation,Mann–Kendall(M–K)trend test,as well as Pearson correlation and Spearman rank correlation analyses to systematically examine the spatiotemporal patterns of runoff and its climatic driving mechanisms across Tajikistan,providing a scientific basis for sustainable water resource utilization and management in the study area.Results indicated that during 2000–2024,the annual runoff in Tajikistan exhibited statistically non-significant long-term trend(P=0.76),while displaying pronounced seasonal variability and strong spatial heterogeneity.Spring and summer average runoff primarily exhibited slight declining tendencies,while winter average runoff exhibited pronounced reduction in localized regions,such as the Syr Darya Basin,the Vakhsh River Basin,and the lower reaches of the Zeravshan River Basin.Precipitation emerged as the dominant positive driver of runoff,exhibiting moderate to strong positive correlations across over 78.00%of the country,whereas potential evapotranspiration consistently functioned as a negative driver.Rising temperatures exerted a dual competitive effect on runoff:in high-elevation,glacier-covered regions,rising temperatures temporarily increased runoff by accelerating glacier melt;however,at the national scale,the negative impact of rising temperature on runoff has played a slightly dominant role to a certain extent by enhancing evapotranspiration.Collectively,these results indicated that the present stability of runoff in Tajikistan is strongly dependent on the short-term compensatory effects of glacier melt and the risk of future runoff decline is likely to intensify as glacier reserves continue to diminish.This study provides a critical scientific evidence to inform sustainable water resource management in Tajikistan and underscores the need for glacier conservation and integrated water resource management strategies.
基金Supported by Sichuan Science and Technology Program(2023YFSY0026,2023YFH0004)Supported by the Institute of Information&Communications Technology Planning&Evaluation(IITP)grant funded by the Korean government(MSIT)(No.RS-2022-00155885,Artificial Intelligence Convergence Innovation Human Resources Development(Hanyang University ERICA)).
文摘Two-dimensional endoscopic images are susceptible to interferences such as specular reflections and monotonous texture illumination,hindering accurate three-dimensional lesion reconstruction by surgical robots.This study proposes a novel end-to-end disparity estimation model to address these challenges.Our approach combines a Pseudo-Siamese neural network architecture with pyramid dilated convolutions,integrating multi-scale image information to enhance robustness against lighting interferences.This study introduces a Pseudo-Siamese structure-based disparity regression model that simplifies left-right image comparison,improving accuracy and efficiency.The model was evaluated using a dataset of stereo endoscopic videos captured by the Da Vinci surgical robot,comprising simulated silicone heart sequences and real heart video data.Experimental results demonstrate significant improvement in the network’s resistance to lighting interference without substantially increasing parameters.Moreover,the model exhibited faster convergence during training,contributing to overall performance enhancement.This study advances endoscopic image processing accuracy and has potential implications for surgical robot applications in complex environments.
基金National Natural Science Foundation of China (52075420)Fundamental Research Funds for the Central Universities (xzy022023049)National Key Research and Development Program of China (2023YFB3408600)。
文摘The burgeoning market for lithium-ion batteries has stimulated a growing need for more reliable battery performance monitoring. Accurate state-of-health(SOH) estimation is critical for ensuring battery operational performance. Despite numerous data-driven methods reported in existing research for battery SOH estimation, these methods often exhibit inconsistent performance across different application scenarios. To address this issue and overcome the performance limitations of individual data-driven models,integrating multiple models for SOH estimation has received considerable attention. Ensemble learning(EL) typically leverages the strengths of multiple base models to achieve more robust and accurate outputs. However, the lack of a clear review of current research hinders the further development of ensemble methods in SOH estimation. Therefore, this paper comprehensively reviews multi-model ensemble learning methods for battery SOH estimation. First, existing ensemble methods are systematically categorized into 6 classes based on their combination strategies. Different realizations and underlying connections are meticulously analyzed for each category of EL methods, highlighting distinctions, innovations, and typical applications. Subsequently, these ensemble methods are comprehensively compared in terms of base models, combination strategies, and publication trends. Evaluations across 6 dimensions underscore the outstanding performance of stacking-based ensemble methods. Following this, these ensemble methods are further inspected from the perspectives of weighted ensemble and diversity, aiming to inspire potential approaches for enhancing ensemble performance. Moreover, addressing challenges such as base model selection, measuring model robustness and uncertainty, and interpretability of ensemble models in practical applications is emphasized. Finally, future research prospects are outlined, specifically noting that deep learning ensemble is poised to advance ensemble methods for battery SOH estimation. The convergence of advanced machine learning with ensemble learning is anticipated to yield valuable avenues for research. Accelerated research in ensemble learning holds promising prospects for achieving more accurate and reliable battery SOH estimation under real-world conditions.
基金the financial support from the National Key Research and Development Program of China(No.2023YFB3907001)the National Natural Science Foundation of China(Nos.U2233217,62371029)the UK Engineering and Physical Sciences Research Council(EPSRC),China(Nos.EP/M026981/1,EP/T021063/1 and EP/T024917/)。
文摘Interference significantly impacts the performance of the Global Navigation Satellite Systems(GNSS),highlighting the need for advanced interference localization technology to bolster anti-interference and defense capabilities.The Uniform Circular Array(UCA)enables concurrent estimation of the Direction of Arrival(DOA)in both azimuth and elevation.Given the paramount importance of stability and real-time performance in interference localization,this work proposes an innovative approach to reduce the complexity and increase the robustness of the DOA estimation.The proposed method reduces computational complexity by selecting a reduced number of array elements to reconstruct a non-uniform sparse array from a UCA.To ensure DOA estimation accuracy,minimizing the Cramér-Rao Bound(CRB)is the objective,and the Spatial Correlation Coefficient(SCC)is incorporated as a constraint to mitigate side-lobe.The optimization model is a quadratic fractional model,which is solved by Semi-Definite Relaxation(SDR).When the array has perturbations,the mathematical expressions for CRB and SCC are re-derived to enhance the robustness of the reconstructed array.Simulation and hardware experiments validate the effectiveness of the proposed method in estimating interference DOA,showing high robustness and reductions in hardware and computational costs associated with DOA estimation.
基金supported by the National Key Research and Development Plan(Grant No.2023YFB3712400)the National Key Research and Development Plan(Grant No.2020YFB1713600).
文摘Mechanical properties are critical to the quality of hot-rolled steel pipe products.Accurately understanding the relationship between rolling parameters and mechanical properties is crucial for effective prediction and control.To address this,an industrial big data platform was developed to collect and process multi-source heterogeneous data from the entire production process,providing a complete dataset for mechanical property prediction.The adaptive bandwidth kernel density estimation(ABKDE)method was proposed to adjust bandwidth dynamically based on data density.Combining long short-term memory neural networks with ABKDE offers robust prediction interval capabilities for mechanical properties.The proposed method was deployed in a large-scale steel plant,which demonstrated superior prediction interval performance compared to lower upper bound estimation,mean variance estimation,and extreme learning machine-adaptive bandwidth kernel density estimation,achieving a prediction interval normalized average width of 0.37,a prediction interval coverage probability of 0.94,and the lowest coverage width-based criterion of 1.35.Notably,shapley additive explanations-based explanations significantly improved the proposed model’s credibility by providing a clear analysis of feature impacts.
基金National Natural Science Foundation of China(U2468201,62122012,62221001).
文摘The rapid expansion of railways,especially High-Speed Railways(HSRs),has drawn considerable interest from both academic and industrial sectors.To meet the future vision of smart rail communications,the rail transport industry must innovate in key technologies to ensure high-quality transmissions for passengers and railway operations.These systems must function effectively under high mobility conditions while prioritizing safety,ecofriendliness,comfort,transparency,predictability,and reliability.On the other hand,the proposal of 6 G wireless technology introduces new possibilities for innovation in communication technologies,which may truly realize the current vision of HSR.Therefore,this article gives a review of the current advanced 6 G wireless communication technologies for HSR,including random access and switching,channel estimation and beamforming,integrated sensing and communication,and edge computing.The main application scenarios of these technologies are reviewed,as well as their current research status and challenges,followed by an outlook on future development directions.
基金funded by the Jiangsu Province Postgraduate Scientific Research and Practice Innovation Program(SJCX240449)projectthe Nanjing University of Information Science and Technology Talent Startup Fund(2022r078).
文摘Camera Pose Estimating from point and line correspondences is critical in various applications,including robotics,augmented reality,3D reconstruction,and autonomous navigation.Existing methods,such as the Perspective-n-Point(PnP)and Perspective-n-Line(PnL)approaches,offer limited accuracy and robustness in environments with occlusions,noise,or sparse feature data.This paper presents a unified solution,Efficient and Accurate Pose Estimation from Point and Line Correspondences(EAPnPL),combining point-based and linebased constraints to improve pose estimation accuracy and computational efficiency,particularly in low-altitude UAV navigation and obstacle avoidance.The proposed method utilizes quaternion parameterization of the rotation matrix to overcome singularity issues and address challenges in traditional rotation matrix-based formulations.A hybrid optimization framework is developed to integrate both point and line constraints,providing a more robust and stable solution in complex scenarios.The method is evaluated using synthetic and realworld datasets,demonstrating significant improvements in performance over existing techniques.The results indicate that the EAPnPL method enhances accuracy and reduces computational complexity,making it suitable for real-time applications in autonomous UAV systems.This approach offers a promising solution to the limitations of existing camera pose estimation methods,with potential applications in low-altitude navigation,autonomous robotics,and 3D scene reconstruction.
文摘Large portions of the tunnel boring machine(TBM)construction cost are attributed to disc cutter consumption,and assessing the disc cutter's wear level can help determine the optimal time to replace the disc cutter.Therefore,the need to monitor disc cutter wear in real-time has emerged as a technical challenge for TBMs.In this study,real-time disc cutter wear monitoring is developed based on sound and vibration sensors.For this purpose,the microphone and accelerometer were used to record the sound and vibration signals of cutting three different types of rocks with varying abrasions on a laboratory scale.The relationship between disc cutter wear and the sound and vibration signal was determined by comparing the measurements of disc cutter wear with the signal plots for each sample.The features extracted from the signals showed that the sound and vibration signals are impacted by the progression of disc wear during the rock-cutting process.The signal features obtained from the rock-cutting operation were utilized to verify the machine learning techniques.The results showed that the multilayer perceptron(MLP),random subspace-based decision tree(RS-DT),DT,and random forest(RF)methods could predict the wear level of the disc cutter with an accuracy of 0.89,0.951,0.951,and 0.927,respectively.Based on the accuracy of the models and the confusion matrix,it was found that the RS-DT model has the best estimate for predicting the level of disc wear.This research has developed a method that can potentially determine when to replace a tool and assess disc wear in real-time.
文摘Cyber-physical systems(CPSs)are regarded as the backbone of the fourth industrial revolution,in which communication,physical processes,and computer technology are integrated.In modern industrial systems,CPSs are widely utilized across various domains,such as smart grids,smart healthcare systems,smart vehicles,and smart manufacturing,among others.Due to their unique spatial distribution,CPSs are highly vulnerable to cyber-attacks,which may result in severe performance degradation and even system instability.Consequently,the security concerns of CPSs have attracted significant attention in recent years.In this paper,a comprehensive survey on the security issues of CPSs under cyber-attacks is provided.Firstly,mathematical descriptions of various types of cyberattacks are introduced in detail.Secondly,two types of secure estimation and control processing schemes,including robust methods and active methods,are reviewed.Thirdly,research findings related to secure control and estimation problems for different types of CPSs are summarized.Finally,the survey is concluded by outlining the challenges and suggesting potential research directions for the future.
基金Fund supported this work for Excellent Youth Scholars of China(Grant No.52222708)the National Natural Science Foundation of China(Grant No.51977007)+1 种基金Part of this work is supported by the research project“SPEED”(03XP0585)at RWTH Aachen Universityfunded by the German Federal Ministry of Education and Research(BMBF)。
文摘Developing sensorless techniques for estimating battery expansion is essential for effective mechanical state monitoring,improving the accuracy of digital twin simulation and abnormality detection.Therefore,this paper presents a data-driven approach to expansion estimation using electromechanical coupled models with machine learning.The proposed method integrates reduced-order impedance models with data-driven mechanical models,coupling the electrochemical and mechanical states through the state of charge(SOC)and mechanical pressure within a state estimation framework.The coupling relationship was established through experimental insights into pressure-related impedance parameters and the nonlinear mechanical behavior with SOC and pressure.The data-driven model was interpreted by introducing a novel swelling coefficient defined by component stiffnesses to capture the nonlinear mechanical behavior across various mechanical constraints.Sensitivity analysis of the impedance model shows that updating model parameters with pressure can reduce the mean absolute error of simulated voltage by 20 mV and SOC estimation error by 2%.The results demonstrate the model's estimation capabilities,achieving a root mean square error of less than 1 kPa when the maximum expansion force is from 30 kPa to 120 kPa,outperforming calibrated stiffness models and other machine learning techniques.The model's robustness and generalizability are further supported by its effective handling of SOC estimation and pressure measurement errors.This work highlights the importance of the proposed framework in enhancing state estimation and fault diagnosis for lithium-ion batteries.
文摘Traffic forecasting with high precision aids Intelligent Transport Systems(ITS)in formulating and optimizing traffic management strategies.The algorithms used for tuning the hyperparameters of the deep learning models often have accurate results at the expense of high computational complexity.To address this problem,this paper uses the Tree-structured Parzen Estimator(TPE)to tune the hyperparameters of the Long Short-term Memory(LSTM)deep learning framework.The Tree-structured Parzen Estimator(TPE)uses a probabilistic approach with an adaptive searching mechanism by classifying the objective function values into good and bad samples.This ensures fast convergence in tuning the hyperparameter values in the deep learning model for performing prediction while still maintaining a certain degree of accuracy.It also overcomes the problem of converging to local optima and avoids timeconsuming random search and,therefore,avoids high computational complexity in prediction accuracy.The proposed scheme first performs data smoothing and normalization on the input data,which is then fed to the input of the TPE for tuning the hyperparameters.The traffic data is then input to the LSTM model with tuned parameters to perform the traffic prediction.The three optimizers:Adaptive Moment Estimation(Adam),Root Mean Square Propagation(RMSProp),and Stochastic Gradient Descend with Momentum(SGDM)are also evaluated for accuracy prediction and the best optimizer is then chosen for final traffic prediction in TPE-LSTM model.Simulation results verify the effectiveness of the proposed model in terms of accuracy of prediction over the benchmark schemes.
基金The National Natural Science Foundation of China(No.U19B2031).
文摘A new method based on the iterative adaptive algorithm(IAA)and blocking matrix preprocessing(BMP)is proposed to study the suppression of multi-mainlobe interference.The algorithm is applied to precisely estimate the spatial spectrum and the directions of arrival(DOA)of interferences to overcome the drawbacks associated with conventional adaptive beamforming(ABF)methods.The mainlobe interferences are identified by calculating the correlation coefficients between direction steering vectors(SVs)and rejected by the BMP pretreatment.Then,IAA is subsequently employed to reconstruct a sidelobe interference-plus-noise covariance matrix for the preferable ABF and residual interference suppression.Simulation results demonstrate the excellence of the proposed method over normal methods based on BMP and eigen-projection matrix perprocessing(EMP)under both uncorrelated and coherent circumstances.
