To determine the fracture characteristics of asphalt mixture a novel fracture test with modified loading modes loading fixtures and the control system of the conventional overlay tester is implemented by the asphalt m...To determine the fracture characteristics of asphalt mixture a novel fracture test with modified loading modes loading fixtures and the control system of the conventional overlay tester is implemented by the asphalt material performance tester AMPT .In order to evaluate the validity of the proposed fracture test four different loading rates including 1 2 3 and 4 mm/min are examined in the AMPT. The results indicate that the fracture behavior is similar to creep at a low loading rate and does not show significant marginal tail extension at a high loading rate.It clearly shows the phase of crack initiation crack propagation and fracture at a loading rate of 3 mm/min. Besides eight fracture parameters such as fracture energy tensile strength and tensile modulus are applied to evaluate the fracture characteristics of asphalt mixture.Development of the overlay tester for the fracture test of asphalt mixture can be considered as a new fracture test of asphalt mixture.展开更多
The mechanical properties of colluvium strongly govern the stability of colluvial slopes, and they arc essential for the related analysis and design. Nevertheless, their measurement is not easy on account of heterogen...The mechanical properties of colluvium strongly govern the stability of colluvial slopes, and they arc essential for the related analysis and design. Nevertheless, their measurement is not easy on account of heterogeneity in property and difficulty of sampling. This study attempted to evaluate the shear strength of remolded colluvium by means of a simple direct shear test in the field. A portable direct shear tester was designed to overcome the inconvenience and expensiveness of the conventional large-scale in-situ direct shear test. It can be easily assembled and applied for the silnplc field direct shear test. For calibration, the results of the portable direct shear tester were compared with the results of the laboratory direct shear tester for four different types of soil samples, i.e. standard sand, slate debris, arenaceous shale debris and mixture of gravel and sand. Correlation formulas were established based on the calibration, enabling the portable direct shear tester to measure and estimate the shear strength of remoldcd colluvium in field. This study primarily focuses on the colluvium in Central Taiwan, including the lateritic Dadu Terrace and the arcnaceous shale of Taiping-Wufcng mounts. The portable direct shear tester was applied to sites selected in these areas, and the results were furthcr analyzed and discussed.展开更多
A study of combining ability for improving rice cooking quality was carried out via genotype plus genotype x environment （GGE） biplot. Four restorer lines and three male sterile lines were used to obtain F1 in a lin...A study of combining ability for improving rice cooking quality was carried out via genotype plus genotype x environment （GGE） biplot. Four restorer lines and three male sterile lines were used to obtain F1 in a line x tester trial at the Rice Research Institute, Amol, Iran in 2009. GGE biplot analysis showed that Neda and IR56 were the best general combiners for amylose content （AC）, whereas Nemat and IR28 had the highest general combining ability （GCA） effects for gelatinization temperature （GT）, and IR58 and IR59 showed the highest GCA effects in terms of gel consistency （GC）. Meanwhile IR58 and IR59 showed large specific combining ability （SCA） effects for AC, while Neda and SA13 had high SCA effects for GT. Nemat and IR28 had large SCA effects for GC. Because intermediate levels ofAC, GT and GC are ideal, Nemat × IR59 was considered as the best possible cross. Based on these results, the GGE biplot showed good potential for identifying suitable parents, heterotic crosses and the best hybrids in line x tester data.展开更多
A jet type erosion-corrosion tester was developed for the erosion-corrosion investigation of high-chromium cast irons. During tests the size and the shape of particles in the slurry can be maintained stable. The jet v...A jet type erosion-corrosion tester was developed for the erosion-corrosion investigation of high-chromium cast irons. During tests the size and the shape of particles in the slurry can be maintained stable. The jet velocity and attack angle can be accurately controlled. The repeatability and ranking consistency of the test results are satisfactory. The test parameters can be adjusted in a wide range, so that the tester can simulate various practical working conditions. Electrochemical test data can be automatically collected and processed. Dynamic polarization curves can be obtained during erosion-corrosion test, which can be used to study the dynamic corrosion characteristics.Two high chromium cast irons were studied in hot concentrated alkaline slurry. The results show that the erosioncorrosion mass loss rate and dynamic corrosion rate of 295Cr26 iron is lower than that of 185Cr13 under the conditions similar to alumyte processing. The mechanism of erosion-corrosion of 295Cr26 and 185Cr13 was studied by using the tester. The interaction between erosion and corrosion was also quantitatively evaluated.展开更多
Impact testing is a primary method to evaluate the impact property of resistance spot welding,which is an important quality index in automotive industry.For testing impact properties of spot welds,many customized test...Impact testing is a primary method to evaluate the impact property of resistance spot welding,which is an important quality index in automotive industry.For testing impact properties of spot welds,many customized testers have been developed.This paper summarized some of the impact testers reported in open literatures and the emphasis was placed on the equipment structures,functions,technical parameters,advantages and disadvantage,etc.Some key issues about the development of the testers such as kinematic energy input mode,fixture design,combined load testing,sensor and data acquisition were discussed.Finally,the problems and prospects in the research and development of impact testers for spot welds were pointed out.展开更多
Because of various error factors,the detecting errors in the real-time experimental data of the wear depth affect the accuracy of the detecting data.The self-made spherical plain bearing tester was studied,and its tes...Because of various error factors,the detecting errors in the real-time experimental data of the wear depth affect the accuracy of the detecting data.The self-made spherical plain bearing tester was studied,and its testing principle of the wear depth of the spherical plain bearing was introduced.Meanwhile,the error factors affecting the wear-depth detecting precision were analyzed.Then,the comprehensive error model of the wear-depth detecting system of the spherical plain bearing was built by the multi-body system theory(MBS).In addition,the thermal deformation of the wear-depth detecting system caused by varying the environmental temperature was detected.Finally,according to the above experimental parameters,the thermal errors of the related parts of the comprehensive error model were calculated by FEM.The results show that the difference between the simulation value and the experimental value is less than 0.005 mm,and the two values are close.The correctness of the comprehensive error model is verified under the thermal error experimental conditions.展开更多
基金The National Natural Science Foundation of China(No.51178114)the Chinese Western Transportation Construction Technology Project of Transportation Ministry(No.2009318000086)
文摘To determine the fracture characteristics of asphalt mixture a novel fracture test with modified loading modes loading fixtures and the control system of the conventional overlay tester is implemented by the asphalt material performance tester AMPT .In order to evaluate the validity of the proposed fracture test four different loading rates including 1 2 3 and 4 mm/min are examined in the AMPT. The results indicate that the fracture behavior is similar to creep at a low loading rate and does not show significant marginal tail extension at a high loading rate.It clearly shows the phase of crack initiation crack propagation and fracture at a loading rate of 3 mm/min. Besides eight fracture parameters such as fracture energy tensile strength and tensile modulus are applied to evaluate the fracture characteristics of asphalt mixture.Development of the overlay tester for the fracture test of asphalt mixture can be considered as a new fracture test of asphalt mixture.
基金support of the National Science Counci(NSC94-2211-E-005-022),Taiwan,China
文摘The mechanical properties of colluvium strongly govern the stability of colluvial slopes, and they arc essential for the related analysis and design. Nevertheless, their measurement is not easy on account of heterogeneity in property and difficulty of sampling. This study attempted to evaluate the shear strength of remolded colluvium by means of a simple direct shear test in the field. A portable direct shear tester was designed to overcome the inconvenience and expensiveness of the conventional large-scale in-situ direct shear test. It can be easily assembled and applied for the silnplc field direct shear test. For calibration, the results of the portable direct shear tester were compared with the results of the laboratory direct shear tester for four different types of soil samples, i.e. standard sand, slate debris, arenaceous shale debris and mixture of gravel and sand. Correlation formulas were established based on the calibration, enabling the portable direct shear tester to measure and estimate the shear strength of remoldcd colluvium in field. This study primarily focuses on the colluvium in Central Taiwan, including the lateritic Dadu Terrace and the arcnaceous shale of Taiping-Wufcng mounts. The portable direct shear tester was applied to sites selected in these areas, and the results were furthcr analyzed and discussed.
文摘A study of combining ability for improving rice cooking quality was carried out via genotype plus genotype x environment （GGE） biplot. Four restorer lines and three male sterile lines were used to obtain F1 in a line x tester trial at the Rice Research Institute, Amol, Iran in 2009. GGE biplot analysis showed that Neda and IR56 were the best general combiners for amylose content （AC）, whereas Nemat and IR28 had the highest general combining ability （GCA） effects for gelatinization temperature （GT）, and IR58 and IR59 showed the highest GCA effects in terms of gel consistency （GC）. Meanwhile IR58 and IR59 showed large specific combining ability （SCA） effects for AC, while Neda and SA13 had high SCA effects for GT. Nemat and IR28 had large SCA effects for GC. Because intermediate levels ofAC, GT and GC are ideal, Nemat × IR59 was considered as the best possible cross. Based on these results, the GGE biplot showed good potential for identifying suitable parents, heterotic crosses and the best hybrids in line x tester data.
文摘A jet type erosion-corrosion tester was developed for the erosion-corrosion investigation of high-chromium cast irons. During tests the size and the shape of particles in the slurry can be maintained stable. The jet velocity and attack angle can be accurately controlled. The repeatability and ranking consistency of the test results are satisfactory. The test parameters can be adjusted in a wide range, so that the tester can simulate various practical working conditions. Electrochemical test data can be automatically collected and processed. Dynamic polarization curves can be obtained during erosion-corrosion test, which can be used to study the dynamic corrosion characteristics.Two high chromium cast irons were studied in hot concentrated alkaline slurry. The results show that the erosioncorrosion mass loss rate and dynamic corrosion rate of 295Cr26 iron is lower than that of 185Cr13 under the conditions similar to alumyte processing. The mechanism of erosion-corrosion of 295Cr26 and 185Cr13 was studied by using the tester. The interaction between erosion and corrosion was also quantitatively evaluated.
文摘Impact testing is a primary method to evaluate the impact property of resistance spot welding,which is an important quality index in automotive industry.For testing impact properties of spot welds,many customized testers have been developed.This paper summarized some of the impact testers reported in open literatures and the emphasis was placed on the equipment structures,functions,technical parameters,advantages and disadvantage,etc.Some key issues about the development of the testers such as kinematic energy input mode,fixture design,combined load testing,sensor and data acquisition were discussed.Finally,the problems and prospects in the research and development of impact testers for spot welds were pointed out.
基金Project(2014E00468R)supported by Technological Innovation Fund of Aviation Industry Corporation of China
文摘Because of various error factors,the detecting errors in the real-time experimental data of the wear depth affect the accuracy of the detecting data.The self-made spherical plain bearing tester was studied,and its testing principle of the wear depth of the spherical plain bearing was introduced.Meanwhile,the error factors affecting the wear-depth detecting precision were analyzed.Then,the comprehensive error model of the wear-depth detecting system of the spherical plain bearing was built by the multi-body system theory(MBS).In addition,the thermal deformation of the wear-depth detecting system caused by varying the environmental temperature was detected.Finally,according to the above experimental parameters,the thermal errors of the related parts of the comprehensive error model were calculated by FEM.The results show that the difference between the simulation value and the experimental value is less than 0.005 mm,and the two values are close.The correctness of the comprehensive error model is verified under the thermal error experimental conditions.
