期刊文献+
共找到1,566篇文章
< 1 2 79 >
每页显示 20 50 100
Metrology of Optical Communication Systems Using Error Vector Magnitude 被引量:1
1
作者 Irshaad Fatadin 《Journal of Applied Mathematics and Physics》 2021年第11期2918-2926,共9页
<div style="text-align:justify;"> Error vector magnitude (EVM) as a performance metric for <em>M</em>-ary quadrature amplitude modulation (QAM) formats in optical coherent systems is presen... <div style="text-align:justify;"> Error vector magnitude (EVM) as a performance metric for <em>M</em>-ary quadrature amplitude modulation (QAM) formats in optical coherent systems is presented. It is shown that the calibrated BER, which would otherwise be under-estimated without the correction factor, can reliably monitor the performance of optical coherent systems near the target BER of 10<sup>-3</sup> for quadrature phase shift keying (QPSK), 16-QAM, and 64-QAM employing carrier phase recovery with differential decoding to compensate for laser phase noise. The impact on the number of symbols used to estimate the BER from EVM analysis is also presented and compared to the BER obtained by error counting. </div> 展开更多
关键词 Carrier Phase Recovery error vector Magnitude (EVM) Quadrature Amplitude Modulation (QAM)
在线阅读 下载PDF
A New Selective Neural Network Ensemble Method Based on Error Vectorization and Its Application in High-density Polyethylene (HDPE) Cascade Reaction Process
2
作者 朱群雄 赵乃伟 徐圆 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2012年第6期1142-1147,共6页
Chemical processes are complex, for which traditional neural network models usually can not lead to satisfactory accuracy. Selective neural network ensemble is an effective way to enhance the generalization accuracy o... Chemical processes are complex, for which traditional neural network models usually can not lead to satisfactory accuracy. Selective neural network ensemble is an effective way to enhance the generalization accuracy of networks, but there are some problems, e.g., lacking of unified definition of diversity among component neural networks and difficult to improve the accuracy by selecting if the diversities of available networks are small. In this study, the output errors of networks are vectorized, the diversity of networks is defined based on the error vectors, and the size of ensemble is analyzed. Then an error vectorization based selective neural network ensemble (EVSNE) is proposed, in which the error vector of each network can offset that of the other networks by training the component networks orderly. Thus the component networks have large diversity. Experiments and comparisons over standard data sets and actual chemical process data set for production of high-density polyethylene demonstrate that EVSNE performs better in generalization ability. 展开更多
关键词 high-density polyethylene modeling selective neural network ensemble diversity definition error vectorization
在线阅读 下载PDF
Multi-camera calibration method based on minimizing the difference of reprojection error vectors 被引量:6
3
作者 HUO Ju LI Yunhui YANG Ming 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2018年第4期844-853,共10页
In order to achieve a high precision in three-dimensional(3D) multi-camera measurement system, an efficient multi-cameracalibration method is proposed. A stitching method of large scalecalibration targets is deduced... In order to achieve a high precision in three-dimensional(3D) multi-camera measurement system, an efficient multi-cameracalibration method is proposed. A stitching method of large scalecalibration targets is deduced, and a fundamental of multi-cameracalibration based on the large scale calibration target is provided.To avoid the shortcomings of the method, the vector differencesof reprojection error with the presence of the constraint conditionof the constant rigid body transformation is modelled, and mini-mized by the Levenberg-Marquardt (LM) method. Results of thesimulation and observation data calibration experiment show thatthe accuracy of the system calibrated by the proposed methodreaches 2 mm when measuring distance section of 20 000 mmand scale section of 7 000 mm × 7 000 mm. Consequently, theproposed method of multi-camera calibration performs better thanthe fundamental in stability. This technique offers a more uniformerror distribution for measuring large scale space. 展开更多
关键词 vision measurement multi-camera calibration field stitching vector error
在线阅读 下载PDF
A Support Vector Regression Approach for Recursive Simultaneous Data Reconciliation and Gross Error Detection in Nonlinear Dynamical Systems 被引量:3
4
作者 MIAO Yu SU Hong-Ye CHU Jian 《自动化学报》 EI CSCD 北大核心 2009年第6期707-716,共10页
关键词 数据分析 自动化系统 智能系统 质量数据
在线阅读 下载PDF
Determination of Total Vector Error of the Phasor Measurement Unit (PMU) Using the Phase Angle Error of a Constant Amplitude Voltage Signal
5
作者 Gabriel Musonda Ackim Zulu Charles S. Lubobya 《Journal of Power and Energy Engineering》 2024年第11期34-47,共14页
This paper investigates the effect of the Phase Angle Error of a Constant Amplitude Voltage signal in determining the Total Vector Error (TVE) of the Phasor Measurement Unit (PMU) using MATLAB/Simulink. The phase angl... This paper investigates the effect of the Phase Angle Error of a Constant Amplitude Voltage signal in determining the Total Vector Error (TVE) of the Phasor Measurement Unit (PMU) using MATLAB/Simulink. The phase angle error is measured as a function of time in microseconds at four points on the IEEE 14-bus system. When the 1 pps Global Positioning System (GPS) signal to the PMU is lost, sampling of voltage signals on the power grid is done at different rates as it is a function of time. The relationship between the PMU measured signal phase angle and the sampling rate is established by injecting a constant amplitude signal at two different points on the grid. In the simulation, 64 cycles per second is used as the reference while 24 cycles per second is used to represent the fault condition. Results show that a change in the sampling rate from 64 bps to 24 bps in the PMUs resulted in phase angle error in the voltage signals measured by the PMU at four VI Measurement points. The phase angle error measurement that was determined as a time function was used to determine the TVE. Results show that (TVE) was more than 1% in all the cases. 展开更多
关键词 Phasor Measurement Unit (PMU) Phase Angle error Total vector error (TVE) State estimation Time Source error Constant Amplitude Signal
在线阅读 下载PDF
Research on in-light alignment error model based on quaternion and rotation vector
6
作者 徐国强 孟秀云 《Journal of Beijing Institute of Technology》 EI CAS 2011年第3期331-338,共8页
Euler angle error model, rotation vector error model (RVE) and quaternion error model (QE) were qualitatively and quantitatively compared and an in-flight alignment filter algorithm was designed. This algorithm us... Euler angle error model, rotation vector error model (RVE) and quaternion error model (QE) were qualitatively and quantitatively compared and an in-flight alignment filter algorithm was designed. This algorithm used extended Kalman filter (EKF) based on RVE and QE separately avoi- ding the accuracy problem of the Euler angle model and used Rauch-Tung-Striebel(RTS) smoothing method to refine the accuracy recuperating the coning error for simplified RVE. Simulation results show that RVE and QE are more adapt for nonlinear filter estimation than the Euler angle model. The filter algorithm designed has more advantages in convergence speed, accuracy and stability comparing with the algorithm based on the three models separately. 展开更多
关键词 error model QUATERNION in-flight alignment rotation vector
在线阅读 下载PDF
Generalized Inverse Vector Valued Osculatory Rational Interpolation and Its Error Formula
7
作者 顾传青 《Advances in Manufacturing》 SCIE CAS 1997年第3期209-213,共5页
In this paper, osculatory rational functions of Thiele-type introduced by Salzer (1962) are extended to the case of vector valued quantities using tile t'ormalism of Graves-Moms (1983). In the computation of the o... In this paper, osculatory rational functions of Thiele-type introduced by Salzer (1962) are extended to the case of vector valued quantities using tile t'ormalism of Graves-Moms (1983). In the computation of the osculatory continued h.actions, the three term recurrence relation is avoided and a new coefficient algorithm is introduced, which is the characteristic of recursive operation. Some examples are given to illustrate its effectiveness. A sutficient condition for cxistence is established. Some interpolating properties including uniqueness are discussed. In the end, all exact interpolating error formula is obtained. 展开更多
关键词 vector valued osculatory rational interpolation error formula
在线阅读 下载PDF
基于向量误差修正模型影响信息转换指标的高耸钢结构损伤检测研究
8
作者 郭惠勇 郑鹏 +1 位作者 张树豪 狄谨 《仪器仪表学报》 北大核心 2026年第2期358-367,共10页
复杂高耸钢结构可以划分为分层的子结构,通过分层处安装传感器达到监测对应子结构层损伤的目的。为了解决复杂高耸钢结构的损伤检测问题,提出了基于向量误差修正模型影响信息转换指标的损伤检测方法。首先,描述了向量误差修正模型的基... 复杂高耸钢结构可以划分为分层的子结构,通过分层处安装传感器达到监测对应子结构层损伤的目的。为了解决复杂高耸钢结构的损伤检测问题,提出了基于向量误差修正模型影响信息转换指标的损伤检测方法。首先,描述了向量误差修正模型的基本理论,给出了模型定阶、协整检验和参数估计的基本方法;然后,进行了向量误差修正模型损伤特征参数分析,通过解析影响矩阵提取了损伤特征影响向量,利用结构未损伤基准状态和损伤状态下的损伤特征影响参数和统计参数构造了影响信息距离,并将测点的自由度信息转换为层间刚度信息构造了影响信息转换指标,在此基础上建立了包含数据采集、向量误差修正模型建模、损伤特征影响向量提取及影响信息转换指标识别的高耸钢结构损伤检测方法和识别流程;最后,进行了3层经典框架和高耸转播塔模型的损伤检测试验研究,通过激振装置在结构上施加非平稳时域荷载获取时程响应数据,利用结构损伤前后的响应数据进行了结构的损伤检测。结果表明:传统的倒谱距离检测指标对于简单框架结构具有一定的检测效果,但对复杂高耸钢结构的损伤检测效果欠佳,而所建议的向量误差修正模型影响信息转换指标具有更好的检测效果,可以更为有效地检测出高耸钢结构的损伤位置。 展开更多
关键词 损伤检测 信息距离 向量误差修正模型 高耸结构 影响矩阵
原文传递
中国短期就业形势预测——基于大型贝叶斯向量自回归模型
9
作者 赵文 肖双双 《山东财经大学学报》 2026年第2期34-45,共12页
在短期就业形势预测中,外部冲击往往伴随大量宏观变量的同步变化,传统低维预测模型难以及时吸收相关信息。基于中国月度宏观经济数据,构建包含158个变量的大型贝叶斯向量自回归(LBVAR)模型,通过引入明尼苏达先验与贝叶斯收缩缓解高维参... 在短期就业形势预测中,外部冲击往往伴随大量宏观变量的同步变化,传统低维预测模型难以及时吸收相关信息。基于中国月度宏观经济数据,构建包含158个变量的大型贝叶斯向量自回归(LBVAR)模型,通过引入明尼苏达先验与贝叶斯收缩缓解高维参数估计中的过拟合问题,并以采购经理指数(PMI)从业人员指数为核心指标开展短期预测分析。研究结果表明,与包含3、14和22个变量的模型相比,158变量LBVAR模型在对PMI从业人员指数、居民消费价格指数以及银行间同业拆借1天加权平均利率等核心指标进行月度短期预测时,整体相对均方误差更小,预测精度更高。进一步结合PMI从业人员指数与城镇调查失业率之间的变化关系,对失业率进行转化预测,预测误差基本维持在0~0.3个百分点。因此,在外部冲击显著、经济运行不确定性上升的背景下,包含更多“及时”宏观变量的LBVAR模型可为精准预判就业形势动态演变、科学制定就业相关政策提供更具参考价值的决策支撑。 展开更多
关键词 从业人员指数 向量自回归模型 贝叶斯收缩 相对均方误差
在线阅读 下载PDF
结合遗传算法和支持向量机的惯性传感器位置校正方法
10
作者 王婷 丁嘉伟 《传感技术学报》 北大核心 2026年第2期309-315,共7页
惯性传感器受到系统误差和噪声的影响,导致其测量结果与真实位置存在偏差,使得传感器位置校正精度较低。为此,提出结合遗传算法和支持向量机的惯性传感器位置校正方法。分析历史惯性传感器的定位误差获取误差产生原因,利用支持向量机对... 惯性传感器受到系统误差和噪声的影响,导致其测量结果与真实位置存在偏差,使得传感器位置校正精度较低。为此,提出结合遗传算法和支持向量机的惯性传感器位置校正方法。分析历史惯性传感器的定位误差获取误差产生原因,利用支持向量机对传感器采集数据实施机器学习处理,初步校正惯性传感器位置。使用遗传算法描述惯性导航误差状态,通过传感器静止状态下角速度以及加速度实现最终位置校正,提高位置校正的准确性和效率。实验结果表明,所提方法校正后加速度保持在1m/s^(2);不同速度前后移动时的平均输出反应时间减少了66%;在不同旋转角度中,经过校正后,误差均值、误差最大值降低了0.155 rad/s、1.369 rad/s。该方法解决了校正精度低、校正效果差的问题。 展开更多
关键词 惯性传感器 位置校正 遗传算法 支持向量机 误差分析
在线阅读 下载PDF
数控机床几何误差的激光传感器测量方法研究
11
作者 李姗 《机械设计与制造》 北大核心 2026年第1期380-384,共5页
由于数控机床结构复杂且工作环境多变,在设计数控机床几何误差的测量方法时,通常会出现数控几何误差数据质量不高导致方法的测量精度较低。对此,现提出基于激光传感器的数控机床几何误差测量方法。采用激光传感器,获取大量的数控机床几... 由于数控机床结构复杂且工作环境多变,在设计数控机床几何误差的测量方法时,通常会出现数控几何误差数据质量不高导致方法的测量精度较低。对此,现提出基于激光传感器的数控机床几何误差测量方法。采用激光传感器,获取大量的数控机床几何误差数据,并对其进行归约化处理,由此分别建立数控机床线性轴和旋转轴的几何误差向量,由此计算出数控机床几何误差向量,从而输出对应的数控机床几何误差测量结果,并利用校准函数对测量结果进行校准。通过上述的设计,完成对数控机床几何误差测量方法的设计。在实验测试中,设计的基于激光传感器的数控机床几何误差测量方法在实际应用中表现出较高的测量精度。 展开更多
关键词 激光传感器 数控机床 几何误差 误差向量 误差测量方法 方法设计
在线阅读 下载PDF
工业机器人动力学参数辨识与误差补偿研究
12
作者 邹孔金 丁建完 《机械设计与制造》 北大核心 2026年第2期276-281,共6页
传统机器人运动控制通常采用PID控制,但传统PID控制反映滞后,动态性能差,精度较低。前馈控制能显著提升机器人控制性能,但需要建立精确的动力学模型,所以要辨识机器人动力学参数。利用牛顿-欧拉法建立机器人动力学模型,选用傅里叶级数... 传统机器人运动控制通常采用PID控制,但传统PID控制反映滞后,动态性能差,精度较低。前馈控制能显著提升机器人控制性能,但需要建立精确的动力学模型,所以要辨识机器人动力学参数。利用牛顿-欧拉法建立机器人动力学模型,选用傅里叶级数型激励轨迹并以使得观测矩阵条件数最小为目标进行优化,采集机器人在该轨迹下的运动数据,使用加权最小二乘法辨识得到机器人动力学参数,因为工业机器人具有复杂和非线性的特点,通过参数辨识得到的动力学参数建立的逆动力学模型往往存在误差;因此,选用遗传算法优化的支持向量机(Support Vector Machine,SVM)对动力学模型进行误差补偿,支持向量机输入数据是机器人各关节的角度、角速度、角加速度数据,输出数据为预测的动力学模型误差力矩,采集机器人在多条傅里叶轨迹下的运动数据,输入支持向量机训练并预测,结果表明,误差补偿后的动力学模型能更加准确地预测关节力矩。 展开更多
关键词 机器人动力学 参数辨识 加权最小二乘法 支持向量机 误差补偿
在线阅读 下载PDF
无伴随运动3-UPU并联机构的误差建模与预测
13
作者 刘晓檬 刘晓丹 《智能制造》 2026年第1期131-137,共7页
本文采用闭环矢量分析法建立了一种3-UPU对称并联机构的误差模型并进行了预测。该机构由正三角形定、动平台和3条完全相同的UPU支链构成,具有2个无伴随转动自由度及1个移动自由度。首先运用矩阵运算、微分运算等方式建立了该机构的误差... 本文采用闭环矢量分析法建立了一种3-UPU对称并联机构的误差模型并进行了预测。该机构由正三角形定、动平台和3条完全相同的UPU支链构成,具有2个无伴随转动自由度及1个移动自由度。首先运用矩阵运算、微分运算等方式建立了该机构的误差分析模型,其次分析了各关节误差参数的分布规律,最后通过蒙特卡洛随机数法分析了各关节误差对动平台位姿的敏感性。结果表明,各关节加工误差对该机构的运动精度整体影响较小,其中对旋转运动的影响相对显著,而对倾斜及平移运动的影响较为有限。该研究为后续机构的轨迹优化与误差补偿控制提供了理论支撑。 展开更多
关键词 并联机构 误差分析 闭环矢量分析法 蒙特卡洛随机数法
在线阅读 下载PDF
基于压差式矢量水听器指向性的幅相误差校正方法
14
作者 李赞 陈杭洋 +2 位作者 蒋晓斌 贾辰午 黄新敬 《仪器仪表学报》 北大核心 2026年第2期87-94,共8页
压差式矢量水听器由多对独立的标量水听器组成,而各个标量水听器间存在的幅相误差会导致矢量水听器的压差指向性变形,并且降低对水下目标的测向精度。针对该问题,提出了一种有源旋转校正方法,利用矢量水听器固有的偶极子指向特性,旨在... 压差式矢量水听器由多对独立的标量水听器组成,而各个标量水听器间存在的幅相误差会导致矢量水听器的压差指向性变形,并且降低对水下目标的测向精度。针对该问题,提出了一种有源旋转校正方法,利用矢量水听器固有的偶极子指向特性,旨在校正压差式矢量水听器硬件系统中的固有幅相误差。该方法无需知道辅助声源的精确位置,使用精密转台控制矢量水听器旋转一周,选择一个不在旋转轴上的标量水听器作为基准,对其他标量水听器信号进行幅值缩放和时域平移,直至全部压差指向性曲线被修正为理想形状,从而校正幅相误差。在消声水池中使用实验室自研的三维压差式矢量水听器开展了幅相误差校正和声源测向实验。结果表明,校正后的矢量水听器压差指向性曲线接近理想形状;与校正前相比,旋转水听器测向的方位角测量误差<5°的测试点数增加了10.6%,俯仰角测量误差<10°的测试点数提高了92.9%;平移声源测向的方位角测量误差<5°的测试点数增加了46.3%,俯仰角测量误差<10°的测试点数提高了42.6%。实验结果证明,该方法能够有效校正压差式矢量水听器的幅相误差,并且显著提高对水下目标的测向精度。该方法降低了幅相误差的校正难度和成本,具有一定的应用价值。 展开更多
关键词 压差式矢量水听器 幅相误差校正 水下目标测向
原文传递
基于矢量误差建模的Vienna整流器自适应过零畸变抑制策略
15
作者 廖勇 孙章 +3 位作者 吴帆 吴昀璞 乐书宇 郑茂盛 《电力系统保护与控制》 北大核心 2026年第2期103-115,共13页
针对Vienna整流器输入电流过零畸变问题,提出了一种基于矢量误差建模的Vienna整流器自适应过零畸变抑制策略。首先,分析了Vienna整流器输入电流过零畸变现象,发现电流过零附近由纹波和采样误差导致的扇区误判及扇区误判时共享开关状态... 针对Vienna整流器输入电流过零畸变问题,提出了一种基于矢量误差建模的Vienna整流器自适应过零畸变抑制策略。首先,分析了Vienna整流器输入电流过零畸变现象,发现电流过零附近由纹波和采样误差导致的扇区误判及扇区误判时共享开关状态被使用产生的矢量误差是导致输入电流过零畸变的本质原因。根据分析结果,定量地构建了扇区误判发生条件和矢量误差的数学模型。在此基础上,设计了一种自适应过零畸变抑制策略。通过建立包含矢量误差的多目标模型预测误差函数,优化共享开关状态的使用,动态补偿矢量误差,从而抑制输入电流过零畸变。最后,通过搭建仿真模型和实物平台进行验证。实验结果表明,所提方法能够有效抑制输入电流过零畸变,显著提升了输入电流质量,为Vienna整流器过零畸变抑制提供了一种新的途径。 展开更多
关键词 VIENNA整流器 扇区误判 电流过零畸变 模型预测控制 共享开关状态 矢量误差
在线阅读 下载PDF
基于支持向量机的果实采摘点空间位置误差补偿机制
16
作者 陈科尹 姚勇 《自动化技术与应用》 2026年第4期17-19,128,共4页
农业自动化技术的持续进步,果实采摘机器人在提升农业生产效率方面扮演着愈发关键的角色,将成为推动农业现代化发展的重要力量。然而,在实际采摘作业场景中,复杂多变的环境因素带来了诸多挑战。光照条件的不稳定、果实间相互遮挡以及机... 农业自动化技术的持续进步,果实采摘机器人在提升农业生产效率方面扮演着愈发关键的角色,将成为推动农业现代化发展的重要力量。然而,在实际采摘作业场景中,复杂多变的环境因素带来了诸多挑战。光照条件的不稳定、果实间相互遮挡以及机器人自身定位精度受限等,均导致果实采摘点的空间位置出现误差,这极大地影响了采摘的准确性与效率,成为制约果实采摘机器人广泛应用的瓶颈。针对这一问题,提出了一种基于支持向量机(support vector machine,SVM)的果实采摘点空间位置误差补偿机制。该机制通过构建SVM模型,对采摘过程中的空间位置误差进行预测和补偿,从而提高采摘机器人的定位精度和采摘成功率。实验结果表明,此补偿机制切实可行,能够有效降低果实采摘点的空间位置误差。 展开更多
关键词 支持向量机 果实采摘 空间位置误差 补偿机制
在线阅读 下载PDF
数控机床多轴协同加工技术的创新与发展
17
作者 刘丹丹 《模具制造》 2026年第4期186-188,共3页
针对复杂曲面、多基准结构件及多角度孔系加工中存在的姿态不连续、轨迹稳定性不足以及误差易累积等问题,构建了一种面向高精度加工的多轴协同控制体系。基于运动学建模与过程控制原理,建立RTCP刀具中心点跟随模型,并提出刀轴矢量平滑... 针对复杂曲面、多基准结构件及多角度孔系加工中存在的姿态不连续、轨迹稳定性不足以及误差易累积等问题,构建了一种面向高精度加工的多轴协同控制体系。基于运动学建模与过程控制原理,建立RTCP刀具中心点跟随模型,并提出刀轴矢量平滑与曲率前瞻插补策略,同时结合热效应与切削力变化构建多源误差补偿模型。在航空叶轮及多面结构件加工中进行验证。结果表明,姿态平滑与曲率插补能够有效抑制姿态突变与轨迹振动;RTCP控制与误差补偿使型面误差由12.5μm降低至3.5μm,多基准误差由0.08mm降至0.02mm,加工效率提升超过30%。研究表明,多轴协同加工通过姿态控制、轨迹优化与误差补偿的协同作用,可实现复杂空间加工过程的稳定性与一致性,对航空及高端装备制造具有重要技术支撑意义。 展开更多
关键词 多轴协同加工 RTCP 刀轴矢量平滑 误差补偿
在线阅读 下载PDF
基于空间矢量调制的正交频分复用系统设计与仿真
18
作者 李波 谢文兰 魏文芬 《韶关学院学报》 2026年第1期31-36,共6页
针对传统基于索引调制的正交频分复用(OFDM)系统存在的频谱效率受限与分集增益不足的问题,提出一种基于空间矢量设计的OFDM(SVD-OFDM)方案.该方案将所有子载波划分为多个子块,并在每个子块内构建索引矢量集以激活2个子载波,对正交幅度调... 针对传统基于索引调制的正交频分复用(OFDM)系统存在的频谱效率受限与分集增益不足的问题,提出一种基于空间矢量设计的OFDM(SVD-OFDM)方案.该方案将所有子载波划分为多个子块,并在每个子块内构建索引矢量集以激活2个子载波,对正交幅度调制(QAM)或次级QAM(SQAM)进行调制,从而通过空间矢量设计增加额外信息的传输维度.分析表明,SVD-OFDM方案通过优化空间矢量之间平方最小欧式距离(MED),有效提升了系统的抗多径衰落能力;蒙特卡洛仿真结果表明,在相同配置下,与OFDM-IM、3D-OFDM-IQ-IM及OFDM-I/Q-IM方案相比,SVD-OFDM方案能显著降低误比特率并获得更优的信噪比增益. 展开更多
关键词 正交频分复用 索引调制 空间矢量设计 频谱效率 误比特率 分集增益
在线阅读 下载PDF
Quantitative analysis of the performance of vector tracking algorithms 被引量:5
19
作者 王前 Cui Xiaowei +1 位作者 Liu Jing Zhao Sihao 《High Technology Letters》 EI CAS 2017年第3期238-244,共7页
Vector tracking changes the classical structure of receivers. Combining signal tracking and navigation solution,vector tracking can realize powerful processing capabilities by the fusion technique of receiving channel... Vector tracking changes the classical structure of receivers. Combining signal tracking and navigation solution,vector tracking can realize powerful processing capabilities by the fusion technique of receiving channel and feedback correction. In this paper,we try to break through the complicated details of numerical analysis,consider the overall influencing factors of the residual in observed data,and use the intrinsic link between a conventional receiver and a vector receiver. A simple method for performance analysis of the vector tracking algorithm is proposed. Kalman filter has the same steady performance with the classic digital lock loop through the analysis of the relation between gain and band width. The theoretical analysis by the least squares model shows that the reduction of range error is the basis for the superior performance realized by vector tracking. Thus,the bounds of its performance enhancement under weak signal and highly dynamic conditions can be deduced. Simulation results verify the effectiveness of the analysis presented here. 展开更多
关键词 vector tracking dynamic stress noise loop band width pseudo-range error
在线阅读 下载PDF
电驱动桥齿轮微观修形及减振降噪研究 被引量:1
20
作者 黄俊明 张硕 +2 位作者 兰常艳 徐敏敏 覃频频 《机械传动》 北大核心 2025年第10期104-112,共9页
【目的】针对新能源汽车电驱动桥振动噪声的抑制问题以及基于工程经验进行齿轮修形的局限性,提出一种基于支持向量回归(Support Vector Regression,SVR)的电驱动桥振动响应预测方法。【方法】首先,搭建电驱动桥齿轮传动系统模型,通过齿... 【目的】针对新能源汽车电驱动桥振动噪声的抑制问题以及基于工程经验进行齿轮修形的局限性,提出一种基于支持向量回归(Support Vector Regression,SVR)的电驱动桥振动响应预测方法。【方法】首先,搭建电驱动桥齿轮传动系统模型,通过齿轮接触斑点仿真与试验验证了模型的有效性;其次,基于SVR建立了齿轮微观修形参数-振动响应预测模型,将电驱动桥齿轮传递误差、最大接触应力和螺旋线载荷分布系数作为优化目标;最后,引入带精英策略的快速非支配排序遗传算法(Non-dominated Sorting Genetic Algorithm,NSGA-Ⅱ),对齿轮的微观修形参数进行寻优。【结果】仿真结果表明,经过修形优化,传递误差降低了49%,最大接触应力降低了4%,载荷分布均匀,振动加速度峰值降低了93%。试验验证表明,在不同工况下,电驱动桥噪声均有所降低,降幅最大约4 dB(A)。研究为新能源汽车电驱动桥齿轮传动系统的减振降噪提供了思路和依据。 展开更多
关键词 电驱动桥 微观修形 减振降噪 传递误差 支持向量回归
在线阅读 下载PDF
上一页 1 2 79 下一页 到第
使用帮助 返回顶部