A compact, efficient and high-power laser diode （LD） single-end-pumped Nd：YVO4 laser with continuous-wave emission at 1342 nm is reported. With a single crystal single-end-pumped by fibre-coupled LD array, an outpu...A compact, efficient and high-power laser diode （LD） single-end-pumped Nd：YVO4 laser with continuous-wave emission at 1342 nm is reported. With a single crystal single-end-pumped by fibre-coupled LD array, an output power of 7.36W is obtained from the laser cavity of concave-convex shape, corresponding to an optical-to-optical efficiency of 32.8%. The laser is operated in TEM00 mode with small rms amplitude noise of 0.3%. The influences of the Nd concentration, transmissivity of the output mirror and the cavity length on the output power have been studied experimentally.展开更多
A theoretical model to simulate an end-pumped CW Nd^3＋：GdVO4 laser at 1063 nm is presented. Its essence is to use the propagation equations to demonstrate the spatial evolutions of the pump and the laser powers in t...A theoretical model to simulate an end-pumped CW Nd^3＋：GdVO4 laser at 1063 nm is presented. Its essence is to use the propagation equations to demonstrate the spatial evolutions of the pump and the laser powers in the cavity, hence it is applicable to both low and high gain lasers. The simulation results obtained by this model are in good agreement with the experimental observations reported in the literature for a Ti：sapphlre-pumped Nd^3＋：GdVO4 laser. Moreover, some parameters, such as the reflectivity of output coupler, the spot size of laser beam and the crystal length, are discussed with a view to optimizing the laser performance.展开更多
A fiber-coupled laser-diode （LD） end-pumped Nd：GdVO4 slab continuous-wave （CW） 912-nm laser and an LD bar end-pumped Nd：GdVO4 slab CW 912-nm laser are both demonstrated in this paper. Using the fiber-coupled LD ...A fiber-coupled laser-diode （LD） end-pumped Nd：GdVO4 slab continuous-wave （CW） 912-nm laser and an LD bar end-pumped Nd：GdVO4 slab CW 912-nm laser are both demonstrated in this paper. Using the fiber-coupled LD of end-pumped type, a highest CW 912-nm laser output power of 10.17 W is obtained with a high optical to-optical conversion efficiency of 24.6% and a slope efficiency of 34.5%. The measured M2 factors of beam quality in x and y directions are 5.3 and 5.1, respectively. Besides, an LD bar of end-pumped type is used to realize CW 912-nm laser output, which has the advantages of compactness and low cost. When the pump power is 38.8 W, the output power is 8.87 W and the measured M^2 factors of beam quality in x and y directions are 16 and 1.31, respectively. In order to improve the beam quality of the 912-nm laser at x direction, a new quasi-concentric laser resonator will be designed, and an LD bar end-pumped Nd：GdVO4 slab high-power CW 912-nm TEM00 laser will be realized in the future.展开更多
In this research, numerical simulation and experimental results of thermal stress due to an end-pumped Nd：YVO4 a-cut crystal with 0.5% Nd doping were compared. The findings demonstrate a good consistency with experim...In this research, numerical simulation and experimental results of thermal stress due to an end-pumped Nd：YVO4 a-cut crystal with 0.5% Nd doping were compared. The findings demonstrate a good consistency with experiment. As in this paper has been predicted, at the pumping power above 23 watt, thermal stress has been bigger than thermal facture limit and crystal has broken.展开更多
A laser-diode end-pumped Nd：YVO4 crystal laser is demonstrated to emit the first-order Laguerre- Gaussian （LGm） mode with 502-mW laser power and 22% slope efficiency. Tile LGm-mode is lased only when the pumping ar...A laser-diode end-pumped Nd：YVO4 crystal laser is demonstrated to emit the first-order Laguerre- Gaussian （LGm） mode with 502-mW laser power and 22% slope efficiency. Tile LGm-mode is lased only when the pumping area locates in the central part of the laser crystal＇s front surface, and thereafter the symmetrical LGm-HGol-TEM00 mode transition happens when laser crystal is moved laterally inside several-tens-micron area. The possible mechanism responsible for the phenomenon of symmetrical mode transition is also discussed.展开更多
We demonstrate an end-pumped, c-cut Nd：YVO4 laser that emitted first-order Laguerre-Gaussian （LGol） beam by adjusting the position of focused pump beam relative to laser crystal. The pumping light reached the laser...We demonstrate an end-pumped, c-cut Nd：YVO4 laser that emitted first-order Laguerre-Gaussian （LGol） beam by adjusting the position of focused pump beam relative to laser crystal. The pumping light reached the laser crystal has circular and solid intensity profile. The laser is compact and stable, and the obtained LG01 beam power reaches 202 mW with -25% slope efficiency.展开更多
文摘A compact, efficient and high-power laser diode （LD） single-end-pumped Nd：YVO4 laser with continuous-wave emission at 1342 nm is reported. With a single crystal single-end-pumped by fibre-coupled LD array, an output power of 7.36W is obtained from the laser cavity of concave-convex shape, corresponding to an optical-to-optical efficiency of 32.8%. The laser is operated in TEM00 mode with small rms amplitude noise of 0.3%. The influences of the Nd concentration, transmissivity of the output mirror and the cavity length on the output power have been studied experimentally.
基金supported by the National Natural Science Foundation of China (Grant No 10104009)
文摘A theoretical model to simulate an end-pumped CW Nd^3＋：GdVO4 laser at 1063 nm is presented. Its essence is to use the propagation equations to demonstrate the spatial evolutions of the pump and the laser powers in the cavity, hence it is applicable to both low and high gain lasers. The simulation results obtained by this model are in good agreement with the experimental observations reported in the literature for a Ti：sapphlre-pumped Nd^3＋：GdVO4 laser. Moreover, some parameters, such as the reflectivity of output coupler, the spot size of laser beam and the crystal length, are discussed with a view to optimizing the laser performance.
文摘A fiber-coupled laser-diode （LD） end-pumped Nd：GdVO4 slab continuous-wave （CW） 912-nm laser and an LD bar end-pumped Nd：GdVO4 slab CW 912-nm laser are both demonstrated in this paper. Using the fiber-coupled LD of end-pumped type, a highest CW 912-nm laser output power of 10.17 W is obtained with a high optical to-optical conversion efficiency of 24.6% and a slope efficiency of 34.5%. The measured M2 factors of beam quality in x and y directions are 5.3 and 5.1, respectively. Besides, an LD bar of end-pumped type is used to realize CW 912-nm laser output, which has the advantages of compactness and low cost. When the pump power is 38.8 W, the output power is 8.87 W and the measured M^2 factors of beam quality in x and y directions are 16 and 1.31, respectively. In order to improve the beam quality of the 912-nm laser at x direction, a new quasi-concentric laser resonator will be designed, and an LD bar end-pumped Nd：GdVO4 slab high-power CW 912-nm TEM00 laser will be realized in the future.
文摘In this research, numerical simulation and experimental results of thermal stress due to an end-pumped Nd：YVO4 a-cut crystal with 0.5% Nd doping were compared. The findings demonstrate a good consistency with experiment. As in this paper has been predicted, at the pumping power above 23 watt, thermal stress has been bigger than thermal facture limit and crystal has broken.
基金supported by the National Natural Science Foundation of China(No.61275206)the National "973" Project of China(No.2014CB921300)
文摘A laser-diode end-pumped Nd：YVO4 crystal laser is demonstrated to emit the first-order Laguerre- Gaussian （LGm） mode with 502-mW laser power and 22% slope efficiency. Tile LGm-mode is lased only when the pumping area locates in the central part of the laser crystal＇s front surface, and thereafter the symmetrical LGm-HGol-TEM00 mode transition happens when laser crystal is moved laterally inside several-tens-micron area. The possible mechanism responsible for the phenomenon of symmetrical mode transition is also discussed.
文摘We demonstrate an end-pumped, c-cut Nd：YVO4 laser that emitted first-order Laguerre-Gaussian （LGol） beam by adjusting the position of focused pump beam relative to laser crystal. The pumping light reached the laser crystal has circular and solid intensity profile. The laser is compact and stable, and the obtained LG01 beam power reaches 202 mW with -25% slope efficiency.
