This paper proposes a separated trajectory tracking controller for fishing ships at sea state level 6 to solve the trajectory tracking problem of a fishing ship in a 6-level sea state,and to adapt to different working...This paper proposes a separated trajectory tracking controller for fishing ships at sea state level 6 to solve the trajectory tracking problem of a fishing ship in a 6-level sea state,and to adapt to different working environments and safety requirements.The nonlinear feedback method is used to improve the closed-loop gain shaping algorithm.By introducing the sine function,the problem of excessive control energy of the system can be effectively solved.Moreover,an integral separation design is used to solve the influence of the integral term in conventional PID controllers on the transient performance of the system.In this paper,a common 32.98 m large fiberglass reinforced plastic(FRP)trawler is adopted for simulation research at the winds scale of Beaufort No.7.The results show that the track error is smaller than 3.5 m.The method is safe,feasible,concise and effective and has popularization value in the direction of fishing ship trajectory tracking control.This method can be used to improve the level of informatization and intelligence of fishing ships.展开更多
Rotary steering systems(RSSs)have been increasingly used to develop horizontal wells.A static push-the-bit RSS uses three hydraulic modules with varying degrees of expansion and contraction to achieve changes in the p...Rotary steering systems(RSSs)have been increasingly used to develop horizontal wells.A static push-the-bit RSS uses three hydraulic modules with varying degrees of expansion and contraction to achieve changes in the pushing force acting on the wellbore in different sizes and directions within a circular range,ultimately allowing the wellbore trajectory to be drilled in a predetermined direction.By analyzing its mathematical principles and the actual characteristics of the instrument,a vector force closed-loop control method,including steering and holding modes,was designed.The adjustment criteria for the three hydraulic modules are determined to achieve rapid adjustment of the vector force.The theoretical feasibility of the developed method was verified by comparing its results with the on-site application data of an imported rotary guidance system.展开更多
With the development of Ethernet systems and the growing capacity of modem silicon technology, embedded communication networks are playing an increasingly important role in embedded and safety critical systems. Hardwa...With the development of Ethernet systems and the growing capacity of modem silicon technology, embedded communication networks are playing an increasingly important role in embedded and safety critical systems. Hardware/software co-design is a methodology for solving design problems in processor based embedded systems. In this work, we implemented a new 1-cycle pipeline microprocessor and a fast Ethemet transceiver and established a low cost, high performance embedded network controller, and designed a TCP/IP stack to access the Intemet. We discussed the hardware/software architecture in the forepart, and then the whole system-on-a-chip on Altera Stratix EP1S25F780C6 device. Using the FPGA environment and SmartBit tester, we tested the system＇s throughput. Our simulation results showed that the maximum throughput of Ethemet packets is up to 7 Mbps, that of UDP packets is up to 5.8 Mbps, and that of TCP packets is up to 3.4 Mbps, which showed that this embedded system can easily transmit basic voice and video signals through Ethemet, and that using only one chip can realize that many electronic devices access to the Intemet directly and get high performance.展开更多
Fish in nature exhibit a variety of swimming modes such as forward swimming,backward swimming,turning,pitching,etc.,enabling them to swim in complex scenes such as coral reefs.It is still difficult for a robotic fish ...Fish in nature exhibit a variety of swimming modes such as forward swimming,backward swimming,turning,pitching,etc.,enabling them to swim in complex scenes such as coral reefs.It is still difficult for a robotic fish to swim autonomously in a confined area as a real fish.Here,we develop an untethered robotic manta as an experimental platform,which consists of two flexible pectoral fins and a tail fin,with three infrared sensors installed on the front,left,and right sides of the head to sense the surrounding obstacles.To generate multiple swimming modes of the robotic manta and online switching of different modes,we design a closed-loop Central Pattern Generator(CPG)controller based on distance information and use a combination of phase difference and amplitude of the CPG model to achieve stable and rapid adjustment of yaw angle.To verify the autonomous swimming ability of the robotic manta in complex scenes,we design an experimental scenario with a concave obstacle.The experimental results show that the robotic manta can achieve forward swimming,backward swimming,in situ turning within the concave obstacle,and finally exit from the area safely while relying on the perception of external obstacles,which can provide insight into the autonomous exploration of complex scenes by the biomimetic robotic fish.Finally,the swimming ability of the robotic manta is verified by field tests.展开更多
Security during remote transmission has been an important concern for researchers in recent years.In this paper,a hierarchical encryption multi-image encryption scheme for people with different security levels is desi...Security during remote transmission has been an important concern for researchers in recent years.In this paper,a hierarchical encryption multi-image encryption scheme for people with different security levels is designed,and a multiimage encryption(MIE)algorithm with row and column confusion and closed-loop bi-directional diffusion is adopted in the paper.While ensuring secure communication of medical image information,people with different security levels have different levels of decryption keys,and differentiated visual effects can be obtained by using the strong sensitivity of chaotic keys.The highest security level can obtain decrypted images without watermarks,and at the same time,patient information and copyright attribution can be verified by obtaining watermark images.The experimental results show that the scheme is sufficiently secure as an MIE scheme with visualized differences and the encryption and decryption efficiency is significantly improved compared to other works.展开更多
This paper puts forward a new scheme of Embedded Numerical Control System based on ARM and DSP,which is at the base of research on traditional numerical control system and embedded technology.And the paper also descri...This paper puts forward a new scheme of Embedded Numerical Control System based on ARM and DSP,which is at the base of research on traditional numerical control system and embedded technology.And the paper also describes the develop- ment of hardware and software platform.All the development and realization are based on the idea of module design.The embed- ded numerical control system,using ARM and DSP to construct the main control platform,realizes the real-time operation of sys- tem and improves the stability and reliability with the modular designing ideas of hardware and software and with the support of embedded real-time operating system(uc/os-Ⅱ).And the system could realize the multi-network supporting,which is also accord with the development of modularization,flexibility and latticing of numerical control system.展开更多
Because of limited resource of embedded platforms, the computational complexity of advanced control algorithms raises significant challenges for the use of embedded systems in complex control field. A Scilab/Scicos ba...Because of limited resource of embedded platforms, the computational complexity of advanced control algorithms raises significant challenges for the use of embedded systems in complex control field. A Scilab/Scicos based embedded controller is developed on which various control software can be easily modeled, simulated, implemented, and evaluated to meet the ever-expanding requirements of industrial control applications. Built on the Cirrus Logic EP9315 ARM systems-on-chip board, this embedded controller is possible to develop complex embedded control systems that employ advanced control strategies in a rapid and cost-efficient fashion. Due to the free and open source nature of the software packages used, the cost of the embedded controller is minimized.展开更多
This paper presents a multi-interface embedded server architecture for remote real-time monitoring system and distributed monitoring applications. In the scheme,an embedded microprocessor( LPC3250 from NXP) is chosen ...This paper presents a multi-interface embedded server architecture for remote real-time monitoring system and distributed monitoring applications. In the scheme,an embedded microprocessor( LPC3250 from NXP) is chosen as the CPU of the embedded server with a linux operation system( OS) environment. The embedded server provides multiple interfaces for supporting various application scenarios. The whole network is based on local area network and adopts the Browser / Server( B / S) model. The monitoring and control node is as a browser endpoint and the remote node with an embedded server is as a server endpoint. Users can easily acquire various sensors information through writing Internet protocol address of remote node on the computer browser. Compared with client / server( C / S) mode,B / S model needs less maintain and can be applicable to large user group. In addition,a simple network management protocol( SNMP) is used for management of devices in Internet protocol( IP) networks. The results of the demonstration experiment show that the proposed system gives good support to manage the network from different user terminals and allows the users to better interact with the ambient environment.展开更多
This paper describes a new actively controlled multi-fan wind tunnel that generates natural wind as a type of turbulence wind tunnel at a reduced cost. The driving section of the wind tunnel has 100 PC cooling fans th...This paper describes a new actively controlled multi-fan wind tunnel that generates natural wind as a type of turbulence wind tunnel at a reduced cost. The driving section of the wind tunnel has 100 PC cooling fans that are controlled by an original embedded system. The fluctuating velocity wind is successfully generated with a mean velocity of 7 m/s and two turbulent intensities of 2% and 3% based on Karman’s power spectrum density function. The case of 2% has the integral scales of 5 m, 10m and 20 m, and the case of 3% has the integral scales of 3 m, 6 m and 15 m with a turbulence grid. In particular, the wind with the turbulent intensity of 2% satisfies the Kolmogorov’s -5/3 multiplication rule of inertial subrange with the frequency range from 0.01 Hz to 2.0 Hz. Consequently, the new wind tunnel can be used for studying engineering technology and research regarding conditions with natural wind.展开更多
A platform named EMECS based on embedded Ethernet control system is implemented.A PC running Fedora 6(Linux2.6)works as a central controller.A kit running Linux 2.4 based on Samsung2410A(ARM920t core)works as a remote...A platform named EMECS based on embedded Ethernet control system is implemented.A PC running Fedora 6(Linux2.6)works as a central controller.A kit running Linux 2.4 based on Samsung2410A(ARM920t core)works as a remote controller and a DC motor(ESCA P28HSL18-219/204)made by Portescap Company works as a plant.Firstly,system modeling is presented by analyzing the characteristics of Ethernet and the plant,based on a proposed delay measurement method.Secondly,implementation of the system including program and hardware is described in detail.And then the delay is measured and the control results of the system are tested in three cases with different network loads as well.The platform is proved to have flexibility of running different control algorithms and extensibility of adding nodes.Experiment results demonstrate the validity of the system.展开更多
A cost-effective component minimized embedded controlled Z-source inverter for induction motor drive is presented. The proposed topology combines the advantages of a traditional four-switch three-phase inverter with t...A cost-effective component minimized embedded controlled Z-source inverter for induction motor drive is presented. The proposed topology combines the advantages of a traditional four-switch three-phase inverter with the advantages of the z impedance network (two inductors in series and two X connected capacitors). This new topology, besides the self-boost property, has low switch count and it can operate as a buck-boost inverter. As a result, the new embedded controlled reduced switch Z-source inverter system provides ride through capability during voltage sags, reduces line harmonics, improves power factor, reliability and extends output voltage range. Analysis, simulation and experiment result will be presented to demonstrate these new features.展开更多
Cavity beam position monitor(BPM) is widely used in a precise electron beam position measurement. Based on high performance oscilloscope-embedded EPICS input/output controller,we developed an on-line cavity BPM signal...Cavity beam position monitor(BPM) is widely used in a precise electron beam position measurement. Based on high performance oscilloscope-embedded EPICS input/output controller,we developed an on-line cavity BPM signal processing system for fast data acquisition solution when designing a cavity BPM.Also,methods for extracting the position information from cavity pickup signals and calibration algorithm are included in this solution.展开更多
The paper addresses the problem of reconciling the modern control paradigm developed by R. Kalman in the sixties of the past century, and the centenary error-based design of the proportional, integrative and derivati...The paper addresses the problem of reconciling the modern control paradigm developed by R. Kalman in the sixties of the past century, and the centenary error-based design of the proportional, integrative and derivative （PID） controllers. This is done with the help of the error loop whose stability is proved to be necessary and sufficient for the close-loop plant stability. The error loop is built by cascading the uncertain plant-to-model discrepancies （causal, parametric, initial state, neglected dynamics）, which are driven by the design model output and by arbitrary bounded signals, with the control unit transfer functions. The embedded model control takes advantage of the error loop and its equations to design appropriate algorithms of the modern control theory （state predictor, control law, reference generator）, which guarantee the error loop stability and performance. A simulated multivariate case study shows modeling and control design steps and the coherence of the predicted and simulated performance.展开更多
In the traditional project of industry control, the field operator is the only man who watches production condition at the production spot. Enterprise administers cannot obtain real-time production status and make rea...In the traditional project of industry control, the field operator is the only man who watches production condition at the production spot. Enterprise administers cannot obtain real-time production status and make real-time decision if they don’t reach the production spot. Because of the development of Embedded Web Server such status is being changed. The remote monitor and control mode based on Embedded Web Server provides complete exact real-time information for managers, and makes it possible to make a decision in real time. In the paper, the design and implements of Embedded Web Server are presented and the key realization technology of it is described in detail. EWS (Embedded Web Server) will effectively lower system operating cost and improve maintaining efficiency, which has wide application prospect and popularization value in industrial control systems.展开更多
With the development of computer technology, embedded control system plays an important role in modern industry. For the embedded system, traditional development methods are time-consuming and system is not easy to ma...With the development of computer technology, embedded control system plays an important role in modern industry. For the embedded system, traditional development methods are time-consuming and system is not easy to maintain. Domain-specific modeling provides a solution for the problems. In this paper, we proposed development architecture for embedded control systems based on MIC. GME is used to construct meta-model and application model, model in-terpreter interprets model and stores model information in xml format document. The final cross-platform codes are automatically generated by different templates and xml format document. This development method can reduce time and cost in the lifecycle of system development.展开更多
This paper describes a research project that uses embedded systems design principles to construct and simulate an Engine Control Unit （ECU） for a hybrid car. The ECU is designed to select a fuel type based on the st...This paper describes a research project that uses embedded systems design principles to construct and simulate an Engine Control Unit （ECU） for a hybrid car. The ECU is designed to select a fuel type based on the stress level of the simulated engine. The primary goal of the project was to use a robotics kit, connected to sensors, to simulate a hybrid car under certain stress conditions such as hill climbing or full throttle. The project uses the LEGO~ Mindstorms~ NXT robotics kit combined with a Java-based firmware, a pressure sensor to simulate a gas pedal, and a tilt sensor to determine when the car is traveling uphill or downhill. The objective was to develop, through simulation, a framework for adjusting the ratios/proportions of fuel types and mixture under the stress conditions. The expected result was to establish a basis for determining the ideal/optimal fuel-mix-stress ratios on the hybrid car＇s performance. Using the NXT robotics kit abstracted the low level details of the embedded system design, which allowed a focus on the high level design details of the research. Also, using the NXJ Java-based firmware allowed the incorporation of object oriented design principles into the project. The paper outlines the evolution and the compromises made in the choice of hardware and software components, and describes the computations and methodologies used in the project.展开更多
With the growing adoption of artificial intelligence algorithms and neural networks,online learning and adaptive methods for updating the bandwidth have become increasingly prevalent.However,the conditions required to...With the growing adoption of artificial intelligence algorithms and neural networks,online learning and adaptive methods for updating the bandwidth have become increasingly prevalent.However,the conditions required to ensure closed-loop stability when employing a time-varying bandwidth,as well as the supporting mathematical foundations,remain insufficiently studied.This paper investigates the stability condition for active disturbance rejection control(ADRC)with a time-varying bandwidth extended state observer(ESO).A new stability condition is derived,which means that the upper bound of rate of change for ESO bandwidth should be restricted.Moreover,under the proposed condition,the closed-loop stability of ADRC with a time-varying bandwidth observer is rigorously proved for nonlinear uncertainties.In simulations,the necessity of the proposed condition is illustrated,demonstrating that the rate of change of ESO bandwidth is crucial for closed-loop stability.展开更多
In order to achieve remote control problems for the intelligent home appliances, The paper presents a realization method through the Internet and GSM remote to control appliances of smart home, and given circuit. And ...In order to achieve remote control problems for the intelligent home appliances, The paper presents a realization method through the Internet and GSM remote to control appliances of smart home, and given circuit. And described in detail the hardware and software design of smart home appliances and their control method. Test results show that the system is stable and reliable.展开更多
A multichannel remote control system for imelligent community based on the STC89C54 chip was designed with the technique of embedded Web server. The control system can monitor 255 signals and eight control signals of ...A multichannel remote control system for imelligent community based on the STC89C54 chip was designed with the technique of embedded Web server. The control system can monitor 255 signals and eight control signals of one node at the same time, and can be connected to the internet by the TCP/IP protocol. So the field control information can be shown dynamically in a remote computer by way of web pages. The system has high convenience and friendly monitoring interface, then especially is fit for the large conamunity and storage that need multipoint monitoring and frequent switching door.展开更多
Objective To observe the clinical effect of acupoint catgut embedding combined with abdominal acupuncture for treatment of abdominal obesity under the theoretical guidance of regulating the three energizer.Methods One...Objective To observe the clinical effect of acupoint catgut embedding combined with abdominal acupuncture for treatment of abdominal obesity under the theoretical guidance of regulating the three energizer.Methods One hundred and twenty patients were randomly divided into acupoint catgut embedding group（group A）,abdominal acupuncture group（group B）,acupoint catgut embedding combined with abdominal acupuncture group（group C） and blank control group（group D） based on blocked random method,with 30 cases each;the first three groups based on the principle of regulating three energizer were respectively given acupoint catgut embedding at Zhongwan（中脘 CV12）,Tianshu（天枢 ST 25）,Yinjiao（阴交 CV 7）,Zhigou（支沟 TE 6）,Guanyuan（关元 CV 4）,Zusanli（足三里 ST 36） with catgut embedding once every 7 days,three times for each course of treatment,abdominal acupuncture once every3 days,seven times for each course of treatment.Results The therapeutic effect of each group after treatment was respectively 46.7%（14/30）,43.3%（13/30）,76.7%（23/30） and 26.7%（8/30）,with statistically significant difference.For comparison of waist circumference difference,there was no statistical significance between acupoint catgut embedding combined with abdominal acupuncture and acupoint catgut embedding group（P=0.54）,and for comparison of weight difference,there was statistical significance in terms of therapeutic effect between acupoint catgut embedding combined with abdominal acupuncture and A,B,D groups（4.49±0.59 vs 2.64±0.53,2.87±0.44,1.45±0.26,all P〈0.05）.Conclusion Acupoint catgut embedding combined with abdominal acupuncture had the best effect in terms of total effective rate for treatment of abdominal obesity,equivalent therapeutic effect to simple acupoint catgut embedding in terms of waist circumference reduction,and the best therapeutic effect in terms of weight reduction.展开更多
基金supported by Liaoning Provincial Department of Education 2023 Basic Research Projects for Universities and Colleges(Grant No.JYTQN2023131)Liaoning Provincial Science and Technology Program:Cooperative Control and Recognition of Unmanned Vessels for Fishing Vessel Operation Scenarios(Grant No.600024003)Liaoning Provincial Department of Education Scientific Research Funding Project(Grant No.LJKZ0726).
文摘This paper proposes a separated trajectory tracking controller for fishing ships at sea state level 6 to solve the trajectory tracking problem of a fishing ship in a 6-level sea state,and to adapt to different working environments and safety requirements.The nonlinear feedback method is used to improve the closed-loop gain shaping algorithm.By introducing the sine function,the problem of excessive control energy of the system can be effectively solved.Moreover,an integral separation design is used to solve the influence of the integral term in conventional PID controllers on the transient performance of the system.In this paper,a common 32.98 m large fiberglass reinforced plastic(FRP)trawler is adopted for simulation research at the winds scale of Beaufort No.7.The results show that the track error is smaller than 3.5 m.The method is safe,feasible,concise and effective and has popularization value in the direction of fishing ship trajectory tracking control.This method can be used to improve the level of informatization and intelligence of fishing ships.
基金supported by the Opening Foundation of China National Logging Corporation(CNLC20229C06)the China Petroleum Technical Service Corporation's science project'Development and application of 475 rotary steering system'(2024T-001001)。
文摘Rotary steering systems(RSSs)have been increasingly used to develop horizontal wells.A static push-the-bit RSS uses three hydraulic modules with varying degrees of expansion and contraction to achieve changes in the pushing force acting on the wellbore in different sizes and directions within a circular range,ultimately allowing the wellbore trajectory to be drilled in a predetermined direction.By analyzing its mathematical principles and the actual characteristics of the instrument,a vector force closed-loop control method,including steering and holding modes,was designed.The adjustment criteria for the three hydraulic modules are determined to achieve rapid adjustment of the vector force.The theoretical feasibility of the developed method was verified by comparing its results with the on-site application data of an imported rotary guidance system.
文摘With the development of Ethernet systems and the growing capacity of modem silicon technology, embedded communication networks are playing an increasingly important role in embedded and safety critical systems. Hardware/software co-design is a methodology for solving design problems in processor based embedded systems. In this work, we implemented a new 1-cycle pipeline microprocessor and a fast Ethemet transceiver and established a low cost, high performance embedded network controller, and designed a TCP/IP stack to access the Intemet. We discussed the hardware/software architecture in the forepart, and then the whole system-on-a-chip on Altera Stratix EP1S25F780C6 device. Using the FPGA environment and SmartBit tester, we tested the system＇s throughput. Our simulation results showed that the maximum throughput of Ethemet packets is up to 7 Mbps, that of UDP packets is up to 5.8 Mbps, and that of TCP packets is up to 3.4 Mbps, which showed that this embedded system can easily transmit basic voice and video signals through Ethemet, and that using only one chip can realize that many electronic devices access to the Intemet directly and get high performance.
基金supported by the National Key Research and Development Program(Grant No.2020YFB1313200,2022YFC2805200)the National Natural Science Foundation of China(Grant No.52001260,52201381)Ningbo Natural Science Foundation(Grant No.2022J062).
文摘Fish in nature exhibit a variety of swimming modes such as forward swimming,backward swimming,turning,pitching,etc.,enabling them to swim in complex scenes such as coral reefs.It is still difficult for a robotic fish to swim autonomously in a confined area as a real fish.Here,we develop an untethered robotic manta as an experimental platform,which consists of two flexible pectoral fins and a tail fin,with three infrared sensors installed on the front,left,and right sides of the head to sense the surrounding obstacles.To generate multiple swimming modes of the robotic manta and online switching of different modes,we design a closed-loop Central Pattern Generator(CPG)controller based on distance information and use a combination of phase difference and amplitude of the CPG model to achieve stable and rapid adjustment of yaw angle.To verify the autonomous swimming ability of the robotic manta in complex scenes,we design an experimental scenario with a concave obstacle.The experimental results show that the robotic manta can achieve forward swimming,backward swimming,in situ turning within the concave obstacle,and finally exit from the area safely while relying on the perception of external obstacles,which can provide insight into the autonomous exploration of complex scenes by the biomimetic robotic fish.Finally,the swimming ability of the robotic manta is verified by field tests.
基金Project supported by the National Natural Science Foundation of China(Grant No.62061014)the Natural Science Foundation of Liaoning province of China(Grant No.2020-MS-274).
文摘Security during remote transmission has been an important concern for researchers in recent years.In this paper,a hierarchical encryption multi-image encryption scheme for people with different security levels is designed,and a multiimage encryption(MIE)algorithm with row and column confusion and closed-loop bi-directional diffusion is adopted in the paper.While ensuring secure communication of medical image information,people with different security levels have different levels of decryption keys,and differentiated visual effects can be obtained by using the strong sensitivity of chaotic keys.The highest security level can obtain decrypted images without watermarks,and at the same time,patient information and copyright attribution can be verified by obtaining watermark images.The experimental results show that the scheme is sufficiently secure as an MIE scheme with visualized differences and the encryption and decryption efficiency is significantly improved compared to other works.
文摘This paper puts forward a new scheme of Embedded Numerical Control System based on ARM and DSP,which is at the base of research on traditional numerical control system and embedded technology.And the paper also describes the develop- ment of hardware and software platform.All the development and realization are based on the idea of module design.The embed- ded numerical control system,using ARM and DSP to construct the main control platform,realizes the real-time operation of sys- tem and improves the stability and reliability with the modular designing ideas of hardware and software and with the support of embedded real-time operating system(uc/os-Ⅱ).And the system could realize the multi-network supporting,which is also accord with the development of modularization,flexibility and latticing of numerical control system.
基金supported in part by the National Natural Science Foundation under Grant No.61070003,No.61272020,and No.61071128Zhejiang Provincial Natural Science Foundation under Grant No.R1090052 and No.Y1101184
文摘Because of limited resource of embedded platforms, the computational complexity of advanced control algorithms raises significant challenges for the use of embedded systems in complex control field. A Scilab/Scicos based embedded controller is developed on which various control software can be easily modeled, simulated, implemented, and evaluated to meet the ever-expanding requirements of industrial control applications. Built on the Cirrus Logic EP9315 ARM systems-on-chip board, this embedded controller is possible to develop complex embedded control systems that employ advanced control strategies in a rapid and cost-efficient fashion. Due to the free and open source nature of the software packages used, the cost of the embedded controller is minimized.
基金Sponsored by the National High Technology Research and Development Program(Grant No.2012AA02A604)
文摘This paper presents a multi-interface embedded server architecture for remote real-time monitoring system and distributed monitoring applications. In the scheme,an embedded microprocessor( LPC3250 from NXP) is chosen as the CPU of the embedded server with a linux operation system( OS) environment. The embedded server provides multiple interfaces for supporting various application scenarios. The whole network is based on local area network and adopts the Browser / Server( B / S) model. The monitoring and control node is as a browser endpoint and the remote node with an embedded server is as a server endpoint. Users can easily acquire various sensors information through writing Internet protocol address of remote node on the computer browser. Compared with client / server( C / S) mode,B / S model needs less maintain and can be applicable to large user group. In addition,a simple network management protocol( SNMP) is used for management of devices in Internet protocol( IP) networks. The results of the demonstration experiment show that the proposed system gives good support to manage the network from different user terminals and allows the users to better interact with the ambient environment.
文摘This paper describes a new actively controlled multi-fan wind tunnel that generates natural wind as a type of turbulence wind tunnel at a reduced cost. The driving section of the wind tunnel has 100 PC cooling fans that are controlled by an original embedded system. The fluctuating velocity wind is successfully generated with a mean velocity of 7 m/s and two turbulent intensities of 2% and 3% based on Karman’s power spectrum density function. The case of 2% has the integral scales of 5 m, 10m and 20 m, and the case of 3% has the integral scales of 3 m, 6 m and 15 m with a turbulence grid. In particular, the wind with the turbulent intensity of 2% satisfies the Kolmogorov’s -5/3 multiplication rule of inertial subrange with the frequency range from 0.01 Hz to 2.0 Hz. Consequently, the new wind tunnel can be used for studying engineering technology and research regarding conditions with natural wind.
基金Supported by CSC(Chinese Scholarship)(Liu Jin Chu[2006]3074)
文摘A platform named EMECS based on embedded Ethernet control system is implemented.A PC running Fedora 6(Linux2.6)works as a central controller.A kit running Linux 2.4 based on Samsung2410A(ARM920t core)works as a remote controller and a DC motor(ESCA P28HSL18-219/204)made by Portescap Company works as a plant.Firstly,system modeling is presented by analyzing the characteristics of Ethernet and the plant,based on a proposed delay measurement method.Secondly,implementation of the system including program and hardware is described in detail.And then the delay is measured and the control results of the system are tested in three cases with different network loads as well.The platform is proved to have flexibility of running different control algorithms and extensibility of adding nodes.Experiment results demonstrate the validity of the system.
文摘A cost-effective component minimized embedded controlled Z-source inverter for induction motor drive is presented. The proposed topology combines the advantages of a traditional four-switch three-phase inverter with the advantages of the z impedance network (two inductors in series and two X connected capacitors). This new topology, besides the self-boost property, has low switch count and it can operate as a buck-boost inverter. As a result, the new embedded controlled reduced switch Z-source inverter system provides ride through capability during voltage sags, reduces line harmonics, improves power factor, reliability and extends output voltage range. Analysis, simulation and experiment result will be presented to demonstrate these new features.
基金Supported by National Natural Science Foundation(Grant No.11075198)
文摘Cavity beam position monitor(BPM) is widely used in a precise electron beam position measurement. Based on high performance oscilloscope-embedded EPICS input/output controller,we developed an on-line cavity BPM signal processing system for fast data acquisition solution when designing a cavity BPM.Also,methods for extracting the position information from cavity pickup signals and calibration algorithm are included in this solution.
文摘The paper addresses the problem of reconciling the modern control paradigm developed by R. Kalman in the sixties of the past century, and the centenary error-based design of the proportional, integrative and derivative （PID） controllers. This is done with the help of the error loop whose stability is proved to be necessary and sufficient for the close-loop plant stability. The error loop is built by cascading the uncertain plant-to-model discrepancies （causal, parametric, initial state, neglected dynamics）, which are driven by the design model output and by arbitrary bounded signals, with the control unit transfer functions. The embedded model control takes advantage of the error loop and its equations to design appropriate algorithms of the modern control theory （state predictor, control law, reference generator）, which guarantee the error loop stability and performance. A simulated multivariate case study shows modeling and control design steps and the coherence of the predicted and simulated performance.
文摘In the traditional project of industry control, the field operator is the only man who watches production condition at the production spot. Enterprise administers cannot obtain real-time production status and make real-time decision if they don’t reach the production spot. Because of the development of Embedded Web Server such status is being changed. The remote monitor and control mode based on Embedded Web Server provides complete exact real-time information for managers, and makes it possible to make a decision in real time. In the paper, the design and implements of Embedded Web Server are presented and the key realization technology of it is described in detail. EWS (Embedded Web Server) will effectively lower system operating cost and improve maintaining efficiency, which has wide application prospect and popularization value in industrial control systems.
文摘With the development of computer technology, embedded control system plays an important role in modern industry. For the embedded system, traditional development methods are time-consuming and system is not easy to maintain. Domain-specific modeling provides a solution for the problems. In this paper, we proposed development architecture for embedded control systems based on MIC. GME is used to construct meta-model and application model, model in-terpreter interprets model and stores model information in xml format document. The final cross-platform codes are automatically generated by different templates and xml format document. This development method can reduce time and cost in the lifecycle of system development.
文摘This paper describes a research project that uses embedded systems design principles to construct and simulate an Engine Control Unit （ECU） for a hybrid car. The ECU is designed to select a fuel type based on the stress level of the simulated engine. The primary goal of the project was to use a robotics kit, connected to sensors, to simulate a hybrid car under certain stress conditions such as hill climbing or full throttle. The project uses the LEGO~ Mindstorms~ NXT robotics kit combined with a Java-based firmware, a pressure sensor to simulate a gas pedal, and a tilt sensor to determine when the car is traveling uphill or downhill. The objective was to develop, through simulation, a framework for adjusting the ratios/proportions of fuel types and mixture under the stress conditions. The expected result was to establish a basis for determining the ideal/optimal fuel-mix-stress ratios on the hybrid car＇s performance. Using the NXT robotics kit abstracted the low level details of the embedded system design, which allowed a focus on the high level design details of the research. Also, using the NXJ Java-based firmware allowed the incorporation of object oriented design principles into the project. The paper outlines the evolution and the compromises made in the choice of hardware and software components, and describes the computations and methodologies used in the project.
基金supported partially by the National Natural Science Foundation(No.62473344)the T-Flight Laboratory in ShanXi Provincial(No.GSFC2024NBKY05)+1 种基金the Natural Science Basic Research Program of Shaanxi(No.2025JC-YBQN-035)the National Natural Science Foundation of China(Grant No.92471204).
文摘With the growing adoption of artificial intelligence algorithms and neural networks,online learning and adaptive methods for updating the bandwidth have become increasingly prevalent.However,the conditions required to ensure closed-loop stability when employing a time-varying bandwidth,as well as the supporting mathematical foundations,remain insufficiently studied.This paper investigates the stability condition for active disturbance rejection control(ADRC)with a time-varying bandwidth extended state observer(ESO).A new stability condition is derived,which means that the upper bound of rate of change for ESO bandwidth should be restricted.Moreover,under the proposed condition,the closed-loop stability of ADRC with a time-varying bandwidth observer is rigorously proved for nonlinear uncertainties.In simulations,the necessity of the proposed condition is illustrated,demonstrating that the rate of change of ESO bandwidth is crucial for closed-loop stability.
文摘In order to achieve remote control problems for the intelligent home appliances, The paper presents a realization method through the Internet and GSM remote to control appliances of smart home, and given circuit. And described in detail the hardware and software design of smart home appliances and their control method. Test results show that the system is stable and reliable.
文摘A multichannel remote control system for imelligent community based on the STC89C54 chip was designed with the technique of embedded Web server. The control system can monitor 255 signals and eight control signals of one node at the same time, and can be connected to the internet by the TCP/IP protocol. So the field control information can be shown dynamically in a remote computer by way of web pages. The system has high convenience and friendly monitoring interface, then especially is fit for the large conamunity and storage that need multipoint monitoring and frequent switching door.
文摘Objective To observe the clinical effect of acupoint catgut embedding combined with abdominal acupuncture for treatment of abdominal obesity under the theoretical guidance of regulating the three energizer.Methods One hundred and twenty patients were randomly divided into acupoint catgut embedding group（group A）,abdominal acupuncture group（group B）,acupoint catgut embedding combined with abdominal acupuncture group（group C） and blank control group（group D） based on blocked random method,with 30 cases each;the first three groups based on the principle of regulating three energizer were respectively given acupoint catgut embedding at Zhongwan（中脘 CV12）,Tianshu（天枢 ST 25）,Yinjiao（阴交 CV 7）,Zhigou（支沟 TE 6）,Guanyuan（关元 CV 4）,Zusanli（足三里 ST 36） with catgut embedding once every 7 days,three times for each course of treatment,abdominal acupuncture once every3 days,seven times for each course of treatment.Results The therapeutic effect of each group after treatment was respectively 46.7%（14/30）,43.3%（13/30）,76.7%（23/30） and 26.7%（8/30）,with statistically significant difference.For comparison of waist circumference difference,there was no statistical significance between acupoint catgut embedding combined with abdominal acupuncture and acupoint catgut embedding group（P=0.54）,and for comparison of weight difference,there was statistical significance in terms of therapeutic effect between acupoint catgut embedding combined with abdominal acupuncture and A,B,D groups（4.49±0.59 vs 2.64±0.53,2.87±0.44,1.45±0.26,all P〈0.05）.Conclusion Acupoint catgut embedding combined with abdominal acupuncture had the best effect in terms of total effective rate for treatment of abdominal obesity,equivalent therapeutic effect to simple acupoint catgut embedding in terms of waist circumference reduction,and the best therapeutic effect in terms of weight reduction.
