The moving morphable component(MMC)topology optimization method,as a typical explicit topology optimization method,has been widely concerned.In the MMC topology optimization framework,the surrogate material model is m...The moving morphable component(MMC)topology optimization method,as a typical explicit topology optimization method,has been widely concerned.In the MMC topology optimization framework,the surrogate material model is mainly used for finite element analysis at present,and the effectiveness of the surrogate material model has been fully confirmed.However,there are some accuracy problems when dealing with boundary elements using the surrogate material model,which will affect the topology optimization results.In this study,a boundary element reconstruction(BER)model is proposed based on the surrogate material model under the MMC topology optimization framework to improve the accuracy of topology optimization.The proposed BER model can reconstruct the boundary elements by refining the local meshes and obtaining new nodes in boundary elements.Then the density of boundary elements is recalculated using the new node information,which is more accurate than the original model.Based on the new density of boundary elements,the material properties and volume information of the boundary elements are updated.Compared with other finite element analysis methods,the BER model is simple and feasible and can improve computational accuracy.Finally,the effectiveness and superiority of the proposed method are verified by comparing it with the optimization results of the original surrogate material model through several numerical examples.展开更多
Nitrogen deposition has a considerable impact on biogeochemical cycling in terrestrial ecosystems.However,how litter production and element return respond to N addition remains poorly understood in nitrogen-rich subtr...Nitrogen deposition has a considerable impact on biogeochemical cycling in terrestrial ecosystems.However,how litter production and element return respond to N addition remains poorly understood in nitrogen-rich subtropical regions.In this study,a 4-year nitrogen addition experiment explored its eff ects on foliar litter production and carbon,nitrogen and phosphorus in a subtropical Michelia wilsonii forest.A clear seasonal pattern in foliar litterfall was observed,regardless of nitrogen treatments,with a peak in spring and a smaller one in autumn.Foliar litter increased with increasing nitrogen but did not aff ect litter carbon concentrations and often decreased nitrogen and phosphorous concentrations.The eff ect of nitrogen addition was dependent on time(month/year).Carbon,nitrogen and phosphorous return showed similar bimodal seasonal patterns.Nitrogen addition increased carbon and nitrogen return but did not aff ect phosphorous.Our results suggest that the addition of nitrogen stimulates carbon and nutrient return via litterfall.展开更多
Selenocysteine, a selenium-containing analog of cysteine, is found in the prokaryotic and eukaryotic kingdoms in active sites of enzymes involved in oxidation-reduction reactions. This aminoacid is cotranslationally i...Selenocysteine, a selenium-containing analog of cysteine, is found in the prokaryotic and eukaryotic kingdoms in active sites of enzymes involved in oxidation-reduction reactions. This aminoacid is cotranslationally incorporated at UGA codons which usually act as translation stop codons. In eukaryotes, decoding of selenocysteine necessitates the participation of the selenocysteine insertion sequence (SECIS), an element lying in the 3' -untranslated region of selenoprotein mRNAs. A detailed experimental study of the secondary structures of the SECIS elements of rat and human type 1 iodothyronine deiodinases and rat glutathione peroxidase was performed. Enzymatic and chemical structure probing led us to propose a secondary structure model, supported by sequence comparison of 23 SECIS mRNAs. The secondary structure model revealed the existence of a novel type of RNA motif composed of four consecutive non-Watson-Crick base-pairs. Using gel shift experiments, we identified in several mammalian cell type extracts the protein SBP,for SECIS-binding protein, that specifically recognizes the iodothyronine deiodinases and glutathione peroxidase SECIS elements. The structural model that we derived for the SECIS RNAs discloses RNA features possibly implicated in the binding of SBP and/or SECIS function展开更多
1. IntroductionA large number of networks for realizing first and second order transfer functions using a currentconveyor have been reported in the literature. Especially, the networks that can offer highinput impedan...1. IntroductionA large number of networks for realizing first and second order transfer functions using a currentconveyor have been reported in the literature. Especially, the networks that can offer highinput impedance attract attention, for high input impedance has the advantage that the networksmay be used in cascade without requiring impedance matching device. In the Higashimura and展开更多
The nonlinear finite element（FE） analysis has been widely used in the design and analysis of structural or geotechnical systems.The response sensitivities（or gradients） to the model parameters are of significant i...The nonlinear finite element（FE） analysis has been widely used in the design and analysis of structural or geotechnical systems.The response sensitivities（or gradients） to the model parameters are of significant importance in these realistic engineering problems.However the sensitivity calculation has lagged behind,leaving a gap between advanced FE response analysis and other research hotspots using the response gradient.The response sensitivity analysis is crucial for any gradient-based algorithms,such as reliability analysis,system identification and structural optimization.Among various sensitivity analysis methods,the direct differential method（DDM） has advantages of computing efficiency and accuracy,providing an ideal tool for the response gradient calculation.This paper extended the DDM framework to realistic complicated soil-foundation-structure interaction（SFSI） models by developing the response gradients for various constraints,element and materials involved.The enhanced framework is applied to three-dimensional SFSI system prototypes for a pilesupported bridge pier and a pile-supported reinforced concrete building frame structure,subjected to earthquake loading conditions.The DDM results are verified by forward finite difference method（FFD）.The relative importance（RI） of the various material parameters on the responses of SFSI system are investigated based on the DDM response sensitivity results.The FFD converges asymptotically toward the DDM results,demonstrating the advantages of DDM（e.g.,accurate,efficient,insensitive to numerical noise）.Furthermore,the RI and effects of the model parameters of structure,foundation and soil materials on the responses of SFSI systems are investigated by taking advantage of the sensitivity analysis results.The extension of DDM to SFSI systems greatly broaden the application areas of the d gradient-based algorithms,e.g.FE model updating and nonlinear system identification of complicated SFSI systems.展开更多
The method of nonlinear finite element reliability analysis (FERA) of slope stability using the technique of slip surface stress analysis (SSA) is studied. The limit state function that can consider the direction of s...The method of nonlinear finite element reliability analysis (FERA) of slope stability using the technique of slip surface stress analysis (SSA) is studied. The limit state function that can consider the direction of slip surface is given, and the formula-tions of FERA based on incremental tangent stiffness method and modified Aitken accelerating algorithm are developed. The limited step length iteration method (LSLIM) is adopted to calculate the reliability index. The nonlinear FERA code using the SSA technique is developed and the main flow chart is illustrated. Numerical examples are used to demonstrate the efficiency and robustness of this method. It is found that the accelerating convergence algorithm proposed in this study proves to be very efficient for it can reduce the iteration number greatly, and LSLIM is also efficient for it can assure the convergence of the iteration of the reliability index.展开更多
The adaptive remeshing technique for quadrilateral elements consists of modules thetrigger of remeshing, the new mesh generation, adaptive refinement and interpolationof field variables. The new adaptive mesh genemtio...The adaptive remeshing technique for quadrilateral elements consists of modules thetrigger of remeshing, the new mesh generation, adaptive refinement and interpolationof field variables. The new adaptive mesh genemtion is the key problem. First, acoarse mesh is created by using 'loop algorithm'. Subsequent local mesh adaptiverefinement is performed based on effective strain. Finally, a typical example of upset-ting is given to test efficient of techniques, from which it is verified that the remeshingalgorithm developed here exhibits good performance and has high accuracy.展开更多
With the enhanced warming and acidification of global ocean, whether and to what extent the naturally-weathered flu- vial sediment into the sea can release elements and thus influence the geochemical process and ecosy...With the enhanced warming and acidification of global ocean, whether and to what extent the naturally-weathered flu- vial sediment into the sea can release elements and thus influence the geochemical process and ecosystem of global ocean remain to be resolved. In this contribution, an experimental study was carried out to examine the release rates of major elements （Ca, K, Mg and AI） from the surface sediments in the Changjiang （Yangtze River） Estuary under the pH values of 4.0, 6.0 and 7.0. The two stud- ied sediments consist primarily of quartz, plagioclase, calcite and clay minerals, with the BET （Brunauer, Emmett and Teller） surface areas of 61.7m2g-1 and 23.1 m2g-1. Major elements of Ca, K, Mg and A1 show different release rates under different solution pH values. With the decreasing solution pH, the release rates of Ca and K increase obviously, while the release rates of Mg and A1 in- crease with the initial solution pH varying from 6.0 to 7.0. The different release rates of these elements are closely related to the original mineral composition of the sediments and the reaction kinetics. Based on the experimental observation, quartz and clay min- erals that have low dissolution rates may dominate the major element release to the aqueous phase. This study reveals that the en- hancing ocean acidification could cause considerable release of major elements from natural terrigenous sediments into the ambient marine environment, which has to be considered carefully in the future study on global change.展开更多
The large storage requirement is a critical issue in cross-correlation imaging-condition based reverse time migration(RTM),because it requires the operation of the source and receiver wavefields at the same time.The b...The large storage requirement is a critical issue in cross-correlation imaging-condition based reverse time migration(RTM),because it requires the operation of the source and receiver wavefields at the same time.The boundary value method(BVM),based on the finite difference method(FDM),can be used to reconstruct the source wavefield in the reverse time propagation in the same way as the receiver wavefield,which can reduce the storage burden of the RTM data.Considering that the FDM cannot well handle models with discontinuous material properties and rough interfaces,we develop a source wavefield reconstruction strategy based on the finite element method(FEM),using proper orthogonal decomposition(POD)to enhance computational efficiency.In this method,we divide the whole time period into several segments,and construct the POD basis functions to get a reduced order model(ROM)for the source wavefield reconstruction in each segment.We show the corresponding quantitative analysis of the storage requirement of the POD-FEM.Numerical tests on the homogeneous model show the effectiveness of the proposed method,while the layered model and part of the Marmousi model tests indicate that the POD-FEM can keep an excellent balance between computational efficiency and memory usage compared with the full-stored method(FSM)and the BVM,and can be effectively applied in imaging.展开更多
On the stone-paved lanes of Songyang County that date back to ancient times,morning mist lingered as a faint fragrance of tea wafted from a century-old house.Inside,Yang Junjie,a tea maker born in the 1980s,worked def...On the stone-paved lanes of Songyang County that date back to ancient times,morning mist lingered as a faint fragrance of tea wafted from a century-old house.Inside,Yang Junjie,a tea maker born in the 1980s,worked deftly at the stove,his hands moving swiftly over the scorching iron wok as tender green tea leaves dance between his fingers.展开更多
We report the results of the experiment on synthesizing ^(287,288)Mc isotopes (Z=115) using the fusionevaporation reaction ^(243)Am(^(48)Ca,4n,3n)^(287,288)Mc at the Spectrometer for Heavy Atoms and Nuclear Structure-...We report the results of the experiment on synthesizing ^(287,288)Mc isotopes (Z=115) using the fusionevaporation reaction ^(243)Am(^(48)Ca,4n,3n)^(287,288)Mc at the Spectrometer for Heavy Atoms and Nuclear Structure-2(SHANS2),a gas-filled recoil separator located at the China Accelerator Facility for Superheavy Elements(CAFE2).In total,20 decay chains are attributed to ^(288)Mc and 1 decay chain is assigned to ^(287)Mc.The measured oa-decay properties of ^(287,288)Mc as well as its descendants are consistent with the known data.No additional decay chains originating from the 2n or 5n reaction channels were detected.The excitation function of the ^(243)Am(^(48)Ca,3n)^(288)Mc reaction was measured at the cross-section level of picobarn,which indicates the promising capability for the study of heavy and superheavy nuclei at the facility.展开更多
A process for treating cyanide tailings was proposed.The process essentially implicates reduction smelting which involves volatilizing silver,lead,and zinc in the cyanide tailings at high temperatures.Meanwhile,gold a...A process for treating cyanide tailings was proposed.The process essentially implicates reduction smelting which involves volatilizing silver,lead,and zinc in the cyanide tailings at high temperatures.Meanwhile,gold and copper combine with the reduced iron to form a metal phase,allowing for the simultaneous recovery of polymetallic elements.The experimental results indicate that the process works optimally with a coke powder of 7.5 wt.%,an alkalinity of 1.0,a melting temperature of 1450℃,and a melting time of 60 min.Under these conditions,more than 99% of gold,77% of copper and 94% of iron are incorporated into pig iron.In the meantime,the volatilization rate of silver exceeds 90%,while lead and zinc are essentially completely volatilized.The primary component of the by-product smelting slag is akermanite,which exhibits lower leaching toxicity than the national standard and belongs to general solid waste.Additionally,taking the trapping process of iron to copper as a case study,the mechanism of iron trapping is methodically examined and divided into three processes:smelting reduction,migration capture,and condensation deposition.展开更多
Neurodegenerative diseases cause great medical and economic burdens for both patients and society;however, the complex molecular mechanisms thereof are not yet well understood. With the development of high-coverage se...Neurodegenerative diseases cause great medical and economic burdens for both patients and society;however, the complex molecular mechanisms thereof are not yet well understood. With the development of high-coverage sequencing technology, researchers have started to notice that genomic repeat regions, previously neglected in search of disease culprits, are active contributors to multiple neurodegenerative diseases. In this review, we describe the association between repeat element variants and multiple degenerative diseases through genome-wide association studies and targeted sequencing. We discuss the identification of disease-relevant repeat element variants, further powered by the advancement of long-read sequencing technologies and their related tools, and summarize recent findings in the molecular mechanisms of repeat element variants in brain degeneration, such as those causing transcriptional silencing or RNA-mediated gain of toxic function. Furthermore, we describe how in silico predictions using innovative computational models, such as deep learning language models, could enhance and accelerate our understanding of the functional impact of repeat element variants. Finally, we discuss future directions to advance current findings for a better understanding of neurodegenerative diseases and the clinical applications of genomic repeat elements.展开更多
To analyze the differences in the transport and distribution of different types of proppants and to address issues such as the short effective support of proppant and poor placement in hydraulically intersecting fract...To analyze the differences in the transport and distribution of different types of proppants and to address issues such as the short effective support of proppant and poor placement in hydraulically intersecting fractures,this study considered the combined impact of geological-engineering factors on conductivity.Using reservoir production parameters and the discrete elementmethod,multispherical proppants were constructed.Additionally,a 3D fracture model,based on the specified conditions of the L block,employed coupled(Computational Fluid Dynamics)CFD-DEM(Discrete ElementMethod)for joint simulations to quantitatively analyze the transport and placement patterns of multispherical proppants in intersecting fractures.Results indicate that turbulent kinetic energy is an intrinsic factor affecting proppant transport.Moreover,the efficiency of placement and migration distance of low-sphericity quartz sand constructed by the DEM in the main fracture are significantly reduced compared to spherical ceramic proppants,with a 27.7%decrease in the volume fraction of the fracture surface,subsequently affecting the placement concentration and damaging fracture conductivity.Compared to small-angle fractures,controlling artificial and natural fractures to expand at angles of 45°to 60°increases the effective support length by approximately 20.6%.During hydraulic fracturing of gas wells,ensuring the fracture support area and post-closure conductivity can be achieved by controlling the sphericity of proppants and adjusting the perforation direction to control the direction of artificial fractures.展开更多
Element Transfer Reaction(ETR)theory is a new fundamental theory guiding the design of synthetic routes.It analyses problems from a brand-new perspective of element circulation,decomposing the factors affecting synthe...Element Transfer Reaction(ETR)theory is a new fundamental theory guiding the design of synthetic routes.It analyses problems from a brand-new perspective of element circulation,decomposing the factors affecting synthetic efficiency into three elements:element sources,driving force,and output.Different from the retrosynthetic analysis method and the atom economy theory,the ETR theory places more emphasis on examining the problem as a whole and comprehensively considering various factors involved in industrial applications.This perspective intends to elaborate on the scientific connotation of the ETR theory and explore its characteristics by discussing the practical application cases.展开更多
The data production elements are driving profound transformations in the real economy across production objects,methods,and tools,generating significant economic effects such as industrial structure upgrading.This pap...The data production elements are driving profound transformations in the real economy across production objects,methods,and tools,generating significant economic effects such as industrial structure upgrading.This paper aims to reveal the impact mechanism of the data elements on the“three transformations”(high-end,intelligent,and green)in the manufacturing sector,theoretically elucidating the intrinsic mechanisms by which the data elements influence these transformations.The study finds that the data elements significantly enhance the high-end,intelligent,and green levels of China's manufacturing industry.In terms of the pathways of impact,the data elements primarily influence the development of high-tech industries and overall green technological innovation,thereby affecting the high-end,intelligent,and green transformation of the industry.展开更多
The cobalt-free Mn-based Li-rich layered oxide material has the advantages of low cost,high energy density,and good performance at low temperatures,and is the promising choice for energy storage batteries.However,the ...The cobalt-free Mn-based Li-rich layered oxide material has the advantages of low cost,high energy density,and good performance at low temperatures,and is the promising choice for energy storage batteries.However,the long-cycling stability of batteries needs to be improved.Herein,the Mn-based Li-rich cathode materials with small amounts of Li2 MnO3 crystal domains and gradient doping of Al and Ti elements from the surface to the bulk have been developed to improve the structure and interface stability.Then the batteries with a high energy density of 600 Wh kg^(-1),excellent capacity retention of 99.7%with low voltage decay of 0.03 mV cycle^(-1) after 800 cycles,and good rates performances can be achieved.Therefore,the structure and cycling stability of low voltage Mn-based Li-rich cathode materials can be significantly improved by the bulk structure design and interface regulation,and this work has paved the way for developing low-cost and high-energy Mn-based energy storage batteries with long lifetime.展开更多
Total hip arthroplasty for adults with sequelae from childhood hip disorders poses significant challenges due to altered anatomy.The paper published by Oommen et al reviews the essential management strategies for thes...Total hip arthroplasty for adults with sequelae from childhood hip disorders poses significant challenges due to altered anatomy.The paper published by Oommen et al reviews the essential management strategies for these complex cases.This article explores the integration of finite element analysis(FEA)to enhance surgical precision and outcomes.FEA provides detailed biomechanical insights,aiding in preoperative planning,implant design,and surgical technique optimization.By simulating implant configurations and assessing bone quality,FEA helps in customizing implants and evaluating surgical techniques like subtrochanteric shortening osteotomy.Advanced imaging techniques,such as 3D printing,virtual reality,and augmented reality,further enhance total hip arthroplasty precision.Future research should focus on validating FEA models,developing patient-specific simulations,and promoting multidisciplinary collaboration.Integrating FEA and advanced technologies in total hip arthroplasty can improve functional outcomes,reduce complications,and enhance quality of life for patients with childhood hip disorder sequelae.展开更多
As a new type of production factor in healthcare,healthcare data elements have been rapidly integrated into various health production processes,such as clinical assistance,health management,biological testing,and oper...As a new type of production factor in healthcare,healthcare data elements have been rapidly integrated into various health production processes,such as clinical assistance,health management,biological testing,and operation and supervision[1,2].Healthcare data elements include biolog.ical and clinical data that are related to disease,environ-mental health data that are associated with life,and operational and healthcare management data that are related to healthcare activities(Figure 1).Activities such as the construction of a data value assessment system,the devel-opment of a data circulation and sharing platform,and the authorization of data compliance and operation products support the strong growth momentum of the market for health care data elements in China[3].展开更多
基金supported by the Science and Technology Research Project of Henan Province(242102241055)the Industry-University-Research Collaborative Innovation Base on Automobile Lightweight of“Science and Technology Innovation in Central Plains”(2024KCZY315)the Opening Fund of State Key Laboratory of Structural Analysis,Optimization and CAE Software for Industrial Equipment(GZ2024A03-ZZU).
文摘The moving morphable component(MMC)topology optimization method,as a typical explicit topology optimization method,has been widely concerned.In the MMC topology optimization framework,the surrogate material model is mainly used for finite element analysis at present,and the effectiveness of the surrogate material model has been fully confirmed.However,there are some accuracy problems when dealing with boundary elements using the surrogate material model,which will affect the topology optimization results.In this study,a boundary element reconstruction(BER)model is proposed based on the surrogate material model under the MMC topology optimization framework to improve the accuracy of topology optimization.The proposed BER model can reconstruct the boundary elements by refining the local meshes and obtaining new nodes in boundary elements.Then the density of boundary elements is recalculated using the new node information,which is more accurate than the original model.Based on the new density of boundary elements,the material properties and volume information of the boundary elements are updated.Compared with other finite element analysis methods,the BER model is simple and feasible and can improve computational accuracy.Finally,the effectiveness and superiority of the proposed method are verified by comparing it with the optimization results of the original surrogate material model through several numerical examples.
基金supported by the National Natural Science Foundation of China(grants 32071745,32001165,31901295 and 31800519)the Program of Sichuan Excellent Youth Sci-Tech Foundation(2020JDJQ0052)+1 种基金the Applied Basic Research Program of Sichuan of China(2021YJ0340)the National Key Research and Development Program of China(2016YFC0502505 and 2017YFC0505003).
文摘Nitrogen deposition has a considerable impact on biogeochemical cycling in terrestrial ecosystems.However,how litter production and element return respond to N addition remains poorly understood in nitrogen-rich subtropical regions.In this study,a 4-year nitrogen addition experiment explored its eff ects on foliar litter production and carbon,nitrogen and phosphorus in a subtropical Michelia wilsonii forest.A clear seasonal pattern in foliar litterfall was observed,regardless of nitrogen treatments,with a peak in spring and a smaller one in autumn.Foliar litter increased with increasing nitrogen but did not aff ect litter carbon concentrations and often decreased nitrogen and phosphorous concentrations.The eff ect of nitrogen addition was dependent on time(month/year).Carbon,nitrogen and phosphorous return showed similar bimodal seasonal patterns.Nitrogen addition increased carbon and nitrogen return but did not aff ect phosphorous.Our results suggest that the addition of nitrogen stimulates carbon and nutrient return via litterfall.
文摘Selenocysteine, a selenium-containing analog of cysteine, is found in the prokaryotic and eukaryotic kingdoms in active sites of enzymes involved in oxidation-reduction reactions. This aminoacid is cotranslationally incorporated at UGA codons which usually act as translation stop codons. In eukaryotes, decoding of selenocysteine necessitates the participation of the selenocysteine insertion sequence (SECIS), an element lying in the 3' -untranslated region of selenoprotein mRNAs. A detailed experimental study of the secondary structures of the SECIS elements of rat and human type 1 iodothyronine deiodinases and rat glutathione peroxidase was performed. Enzymatic and chemical structure probing led us to propose a secondary structure model, supported by sequence comparison of 23 SECIS mRNAs. The secondary structure model revealed the existence of a novel type of RNA motif composed of four consecutive non-Watson-Crick base-pairs. Using gel shift experiments, we identified in several mammalian cell type extracts the protein SBP,for SECIS-binding protein, that specifically recognizes the iodothyronine deiodinases and glutathione peroxidase SECIS elements. The structural model that we derived for the SECIS RNAs discloses RNA features possibly implicated in the binding of SBP and/or SECIS function
文摘1. IntroductionA large number of networks for realizing first and second order transfer functions using a currentconveyor have been reported in the literature. Especially, the networks that can offer highinput impedance attract attention, for high input impedance has the advantage that the networksmay be used in cascade without requiring impedance matching device. In the Higashimura and
基金National Key Research and Development Program of China under Grant No.2016YFC0701106Natural Sciences and Engineering Research Council of Canada via Discovery under Grant No.NSERC RGPIN-2017-05556 Li
文摘The nonlinear finite element（FE） analysis has been widely used in the design and analysis of structural or geotechnical systems.The response sensitivities（or gradients） to the model parameters are of significant importance in these realistic engineering problems.However the sensitivity calculation has lagged behind,leaving a gap between advanced FE response analysis and other research hotspots using the response gradient.The response sensitivity analysis is crucial for any gradient-based algorithms,such as reliability analysis,system identification and structural optimization.Among various sensitivity analysis methods,the direct differential method（DDM） has advantages of computing efficiency and accuracy,providing an ideal tool for the response gradient calculation.This paper extended the DDM framework to realistic complicated soil-foundation-structure interaction（SFSI） models by developing the response gradients for various constraints,element and materials involved.The enhanced framework is applied to three-dimensional SFSI system prototypes for a pilesupported bridge pier and a pile-supported reinforced concrete building frame structure,subjected to earthquake loading conditions.The DDM results are verified by forward finite difference method（FFD）.The relative importance（RI） of the various material parameters on the responses of SFSI system are investigated based on the DDM response sensitivity results.The FFD converges asymptotically toward the DDM results,demonstrating the advantages of DDM（e.g.,accurate,efficient,insensitive to numerical noise）.Furthermore,the RI and effects of the model parameters of structure,foundation and soil materials on the responses of SFSI systems are investigated by taking advantage of the sensitivity analysis results.The extension of DDM to SFSI systems greatly broaden the application areas of the d gradient-based algorithms,e.g.FE model updating and nonlinear system identification of complicated SFSI systems.
基金supported by the National Natural Science Foundation of China (No. 50748033)the Specific Foundation for PhD of Hefei University of Technology (No. 2007GDBJ044), China
文摘The method of nonlinear finite element reliability analysis (FERA) of slope stability using the technique of slip surface stress analysis (SSA) is studied. The limit state function that can consider the direction of slip surface is given, and the formula-tions of FERA based on incremental tangent stiffness method and modified Aitken accelerating algorithm are developed. The limited step length iteration method (LSLIM) is adopted to calculate the reliability index. The nonlinear FERA code using the SSA technique is developed and the main flow chart is illustrated. Numerical examples are used to demonstrate the efficiency and robustness of this method. It is found that the accelerating convergence algorithm proposed in this study proves to be very efficient for it can reduce the iteration number greatly, and LSLIM is also efficient for it can assure the convergence of the iteration of the reliability index.
文摘The adaptive remeshing technique for quadrilateral elements consists of modules thetrigger of remeshing, the new mesh generation, adaptive refinement and interpolationof field variables. The new adaptive mesh genemtion is the key problem. First, acoarse mesh is created by using 'loop algorithm'. Subsequent local mesh adaptiverefinement is performed based on effective strain. Finally, a typical example of upset-ting is given to test efficient of techniques, from which it is verified that the remeshingalgorithm developed here exhibits good performance and has high accuracy.
基金supported by research funds awarded by the National Natural Science Foundation of China (Grant Nos. 41225020 and 41376049)Continental Shelf Drilling Program (Grant No. GZH201100202)China Geologic Survey (Grant No. GZH201100203)
文摘With the enhanced warming and acidification of global ocean, whether and to what extent the naturally-weathered flu- vial sediment into the sea can release elements and thus influence the geochemical process and ecosystem of global ocean remain to be resolved. In this contribution, an experimental study was carried out to examine the release rates of major elements （Ca, K, Mg and AI） from the surface sediments in the Changjiang （Yangtze River） Estuary under the pH values of 4.0, 6.0 and 7.0. The two stud- ied sediments consist primarily of quartz, plagioclase, calcite and clay minerals, with the BET （Brunauer, Emmett and Teller） surface areas of 61.7m2g-1 and 23.1 m2g-1. Major elements of Ca, K, Mg and A1 show different release rates under different solution pH values. With the decreasing solution pH, the release rates of Ca and K increase obviously, while the release rates of Mg and A1 in- crease with the initial solution pH varying from 6.0 to 7.0. The different release rates of these elements are closely related to the original mineral composition of the sediments and the reaction kinetics. Based on the experimental observation, quartz and clay min- erals that have low dissolution rates may dominate the major element release to the aqueous phase. This study reveals that the en- hancing ocean acidification could cause considerable release of major elements from natural terrigenous sediments into the ambient marine environment, which has to be considered carefully in the future study on global change.
基金This work was supported by Natural Science Basic Research Program of Shaanxi(Program No.2023-JC-YB-269)the National Natural Science Foundation of China(Grant No.41974122).
文摘The large storage requirement is a critical issue in cross-correlation imaging-condition based reverse time migration(RTM),because it requires the operation of the source and receiver wavefields at the same time.The boundary value method(BVM),based on the finite difference method(FDM),can be used to reconstruct the source wavefield in the reverse time propagation in the same way as the receiver wavefield,which can reduce the storage burden of the RTM data.Considering that the FDM cannot well handle models with discontinuous material properties and rough interfaces,we develop a source wavefield reconstruction strategy based on the finite element method(FEM),using proper orthogonal decomposition(POD)to enhance computational efficiency.In this method,we divide the whole time period into several segments,and construct the POD basis functions to get a reduced order model(ROM)for the source wavefield reconstruction in each segment.We show the corresponding quantitative analysis of the storage requirement of the POD-FEM.Numerical tests on the homogeneous model show the effectiveness of the proposed method,while the layered model and part of the Marmousi model tests indicate that the POD-FEM can keep an excellent balance between computational efficiency and memory usage compared with the full-stored method(FSM)and the BVM,and can be effectively applied in imaging.
文摘On the stone-paved lanes of Songyang County that date back to ancient times,morning mist lingered as a faint fragrance of tea wafted from a century-old house.Inside,Yang Junjie,a tea maker born in the 1980s,worked deftly at the stove,his hands moving swiftly over the scorching iron wok as tender green tea leaves dance between his fingers.
基金supported in part by the National Key R&D Program of China (Contract Nos.2023YFA1606500,2024YFE0109800,and 2024YFE0110400)Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDB34010000)+5 种基金the Gansu Key Project of Science and Technology (Grant No.23ZDGA014)the Guangdong Major Project of Basic and Applied Basic Research (Grant No.2021B0301030006)the National Natural Science Foundation of China (Grant Nos.12105328,W2412040,12475126,12422507,12035011,12375118,12435008,and W2412043)the Chinese Academy of Sciences Project for Young Scientists in Basic Research(Grant No.YSBR-002)the Youth Innovation Promotion Association of the Chinese Academy of Sciences (Grant Nos.2020409 and 2023439)the Russian Science Foundation (Grant No.25-42-00003)。
文摘We report the results of the experiment on synthesizing ^(287,288)Mc isotopes (Z=115) using the fusionevaporation reaction ^(243)Am(^(48)Ca,4n,3n)^(287,288)Mc at the Spectrometer for Heavy Atoms and Nuclear Structure-2(SHANS2),a gas-filled recoil separator located at the China Accelerator Facility for Superheavy Elements(CAFE2).In total,20 decay chains are attributed to ^(288)Mc and 1 decay chain is assigned to ^(287)Mc.The measured oa-decay properties of ^(287,288)Mc as well as its descendants are consistent with the known data.No additional decay chains originating from the 2n or 5n reaction channels were detected.The excitation function of the ^(243)Am(^(48)Ca,3n)^(288)Mc reaction was measured at the cross-section level of picobarn,which indicates the promising capability for the study of heavy and superheavy nuclei at the facility.
基金supported by the National Key R&D Program of China(No.2020YFC1909203)the Hunan Provincial Innovation Project,China(No.CX20230213)。
文摘A process for treating cyanide tailings was proposed.The process essentially implicates reduction smelting which involves volatilizing silver,lead,and zinc in the cyanide tailings at high temperatures.Meanwhile,gold and copper combine with the reduced iron to form a metal phase,allowing for the simultaneous recovery of polymetallic elements.The experimental results indicate that the process works optimally with a coke powder of 7.5 wt.%,an alkalinity of 1.0,a melting temperature of 1450℃,and a melting time of 60 min.Under these conditions,more than 99% of gold,77% of copper and 94% of iron are incorporated into pig iron.In the meantime,the volatilization rate of silver exceeds 90%,while lead and zinc are essentially completely volatilized.The primary component of the by-product smelting slag is akermanite,which exhibits lower leaching toxicity than the national standard and belongs to general solid waste.Additionally,taking the trapping process of iron to copper as a case study,the mechanism of iron trapping is methodically examined and divided into three processes:smelting reduction,migration capture,and condensation deposition.
基金supported by the National Natural Science Foundation of China, No.61932008Natural Science Foundation of Shanghai, No.21ZR1403200 (both to JC)。
文摘Neurodegenerative diseases cause great medical and economic burdens for both patients and society;however, the complex molecular mechanisms thereof are not yet well understood. With the development of high-coverage sequencing technology, researchers have started to notice that genomic repeat regions, previously neglected in search of disease culprits, are active contributors to multiple neurodegenerative diseases. In this review, we describe the association between repeat element variants and multiple degenerative diseases through genome-wide association studies and targeted sequencing. We discuss the identification of disease-relevant repeat element variants, further powered by the advancement of long-read sequencing technologies and their related tools, and summarize recent findings in the molecular mechanisms of repeat element variants in brain degeneration, such as those causing transcriptional silencing or RNA-mediated gain of toxic function. Furthermore, we describe how in silico predictions using innovative computational models, such as deep learning language models, could enhance and accelerate our understanding of the functional impact of repeat element variants. Finally, we discuss future directions to advance current findings for a better understanding of neurodegenerative diseases and the clinical applications of genomic repeat elements.
基金funded by the project of the Major Scientific and Technological Projects of CNOOC in the 14th Five-Year Plan(No.KJGG2022-0701)the CNOOC Research Institute(No.2020PFS-03).
文摘To analyze the differences in the transport and distribution of different types of proppants and to address issues such as the short effective support of proppant and poor placement in hydraulically intersecting fractures,this study considered the combined impact of geological-engineering factors on conductivity.Using reservoir production parameters and the discrete elementmethod,multispherical proppants were constructed.Additionally,a 3D fracture model,based on the specified conditions of the L block,employed coupled(Computational Fluid Dynamics)CFD-DEM(Discrete ElementMethod)for joint simulations to quantitatively analyze the transport and placement patterns of multispherical proppants in intersecting fractures.Results indicate that turbulent kinetic energy is an intrinsic factor affecting proppant transport.Moreover,the efficiency of placement and migration distance of low-sphericity quartz sand constructed by the DEM in the main fracture are significantly reduced compared to spherical ceramic proppants,with a 27.7%decrease in the volume fraction of the fracture surface,subsequently affecting the placement concentration and damaging fracture conductivity.Compared to small-angle fractures,controlling artificial and natural fractures to expand at angles of 45°to 60°increases the effective support length by approximately 20.6%.During hydraulic fracturing of gas wells,ensuring the fracture support area and post-closure conductivity can be achieved by controlling the sphericity of proppants and adjusting the perforation direction to control the direction of artificial fractures.
基金Industry Foresight and Key Core Technology(No.YZ2023019)Cooperation Project of Yangzhou City with Yangzhou University(No.YZ2023209)+3 种基金Sichuan Tianfu Talent Programme(No.A.2200732)Chengdu Rongpiao Talent Programme(No.1043)SeleValley Scholars Basic Research Project(No.2301)Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)for financial support。
文摘Element Transfer Reaction(ETR)theory is a new fundamental theory guiding the design of synthetic routes.It analyses problems from a brand-new perspective of element circulation,decomposing the factors affecting synthetic efficiency into three elements:element sources,driving force,and output.Different from the retrosynthetic analysis method and the atom economy theory,the ETR theory places more emphasis on examining the problem as a whole and comprehensively considering various factors involved in industrial applications.This perspective intends to elaborate on the scientific connotation of the ETR theory and explore its characteristics by discussing the practical application cases.
文摘The data production elements are driving profound transformations in the real economy across production objects,methods,and tools,generating significant economic effects such as industrial structure upgrading.This paper aims to reveal the impact mechanism of the data elements on the“three transformations”(high-end,intelligent,and green)in the manufacturing sector,theoretically elucidating the intrinsic mechanisms by which the data elements influence these transformations.The study finds that the data elements significantly enhance the high-end,intelligent,and green levels of China's manufacturing industry.In terms of the pathways of impact,the data elements primarily influence the development of high-tech industries and overall green technological innovation,thereby affecting the high-end,intelligent,and green transformation of the industry.
基金supported by the National Key R&D Program of China(No.2022YFB2404400)the National Natural Science Foundation of China(Nos.U23A20577,52372168,92263206 and 21975006)+1 种基金the“The Youth Beijing Scholars program”(No.PXM2021_014204_000023)the Beijing Natural Science Foundation(Nos.2222001 and KM202110005009).
文摘The cobalt-free Mn-based Li-rich layered oxide material has the advantages of low cost,high energy density,and good performance at low temperatures,and is the promising choice for energy storage batteries.However,the long-cycling stability of batteries needs to be improved.Herein,the Mn-based Li-rich cathode materials with small amounts of Li2 MnO3 crystal domains and gradient doping of Al and Ti elements from the surface to the bulk have been developed to improve the structure and interface stability.Then the batteries with a high energy density of 600 Wh kg^(-1),excellent capacity retention of 99.7%with low voltage decay of 0.03 mV cycle^(-1) after 800 cycles,and good rates performances can be achieved.Therefore,the structure and cycling stability of low voltage Mn-based Li-rich cathode materials can be significantly improved by the bulk structure design and interface regulation,and this work has paved the way for developing low-cost and high-energy Mn-based energy storage batteries with long lifetime.
文摘Total hip arthroplasty for adults with sequelae from childhood hip disorders poses significant challenges due to altered anatomy.The paper published by Oommen et al reviews the essential management strategies for these complex cases.This article explores the integration of finite element analysis(FEA)to enhance surgical precision and outcomes.FEA provides detailed biomechanical insights,aiding in preoperative planning,implant design,and surgical technique optimization.By simulating implant configurations and assessing bone quality,FEA helps in customizing implants and evaluating surgical techniques like subtrochanteric shortening osteotomy.Advanced imaging techniques,such as 3D printing,virtual reality,and augmented reality,further enhance total hip arthroplasty precision.Future research should focus on validating FEA models,developing patient-specific simulations,and promoting multidisciplinary collaboration.Integrating FEA and advanced technologies in total hip arthroplasty can improve functional outcomes,reduce complications,and enhance quality of life for patients with childhood hip disorder sequelae.
基金supported by National Natural Science Foundation of China(Grants 72474022,71974011,72174022,71972012,71874009)"BIT think tank"Promotion Plan of Science and Technology Innovation Program of Beijing Institute of Technology(Grants 2024CX14017,2023CX13029).
文摘As a new type of production factor in healthcare,healthcare data elements have been rapidly integrated into various health production processes,such as clinical assistance,health management,biological testing,and operation and supervision[1,2].Healthcare data elements include biolog.ical and clinical data that are related to disease,environ-mental health data that are associated with life,and operational and healthcare management data that are related to healthcare activities(Figure 1).Activities such as the construction of a data value assessment system,the devel-opment of a data circulation and sharing platform,and the authorization of data compliance and operation products support the strong growth momentum of the market for health care data elements in China[3].
