Electrostatic self-assembly method （ESAM） was used to prepare bentonite supported-nano titanium dioxide photocatalysts. The materials were characterized by X-ray diffraction （XRD）, fourier transform infrared spect...Electrostatic self-assembly method （ESAM） was used to prepare bentonite supported-nano titanium dioxide photocatalysts. The materials were characterized by X-ray diffraction （XRD）, fourier transform infrared spectroscopy （FT-IR） and scanning electron microscopy （SEM）. Methyl orange was used to estimate the photocatalytic activity of the materials. The effects of the calcination temperature and silane dosage on the photocatalytic activity of the samples were investigated. The experimental results show that the bentonite facilitates the formation of anatase and restrains the transformation of anatase to rutile. Part of nano-size TiO2 particles insert into the galleries of bentonite. The photocatalysts exhibit a synergistic effect of adsorption and photocatalysis on methyl orange. Photocatalysts prepared by ESAM method exhibit higher photocatalytic activity and better recycle ability than those of the traditional method.展开更多
Anionic surfactant sodium lauryl sulfate(SDS), cationic surfactant palmityl trimethyl ammonium chloride(CTAC) and TiO_2 were used to prepare multilayer films on quartz optic fibers by the electrostatic self-assembly (...Anionic surfactant sodium lauryl sulfate(SDS), cationic surfactant palmityl trimethyl ammonium chloride(CTAC) and TiO_2 were used to prepare multilayer films on quartz optic fibers by the electrostatic self-assembly (ESA) method. The whole self-assemble process, the function of surfactant and the effect of TiO_2 slurry′s concentration to the self-assemble were discussed. The isoelectric point of TiO_2 slurry measured by experiment is 6.8. The results show that whatever the concentration of the TiO_2 dispersion, a flat and compact adsorbed monolayer on the optic fiber can be built in a stable dispersion at lower pH. There is a adsorbed equilibrium on the substrate (fiber)/solution interface when enough time of incubation is given. A rough and loosen adsorbed layer is formed on the fiber surface by immersed the substrate in a high pH dispersion (pH>10) because the presence of hydroxyl on particle surface. Film thickness can be controlled by controlling the number of layers in the film.展开更多
Computing electrostatic interaction on non-cooperative targets with unknown meshes is crucial for electrostatic-based space on-orbit services.Although meshes for electrostatic interaction computations can be reconstru...Computing electrostatic interaction on non-cooperative targets with unknown meshes is crucial for electrostatic-based space on-orbit services.Although meshes for electrostatic interaction computations can be reconstructed from point clouds,they are usually too dense,leading to high computational costs.This paper presents an optimization method for converting dense meshes into optimal meshes,enabling fast and accurate computation of the electrostatic interaction by point clouds.First,the dense mesh reconstructed from point clouds is simplified into a coarse mesh using local operators.Second,the simplified mesh is refined by an iterative strategy that integrates a lightweight method of moments and an impedance matrix inheritance technique,ultimately yielding an optimal mesh for computing the electrostatic interaction.Simulation results show that our method effectively optimizes dense meshes,making electrostatic interaction computations using point clouds approximately 63.4 times more efficient than the previous method.展开更多
To study the influence of silicon(Si)on 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane(CL-20),NC/CL-20 composite explosives and Si/NC/CL-20 composite explosives were prepared by the electrostatic spraying ...To study the influence of silicon(Si)on 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane(CL-20),NC/CL-20 composite explosives and Si/NC/CL-20 composite explosives were prepared by the electrostatic spraying method.The morphology,structure and thermal decomposition properties of the samples were analyzed using scanning electron microscopy(SEM),X-ray energy spectroscopy(EDS),infrared spectroscopy(FT-IR),and simultaneous thermal analyzer(TG-DSC).Additionally,the combustion process of the samples was tested using a high-speed camera.The results show that the addition of nano-Si contributes to the formation of composite explosives with regular morphology and smaller particle size.The Si/NC/CL-20 composite explosive has better and more uniform sphericity,with an average particle size of 73.4 nm,compared to the NC/CL-20 composite explosive.The Si/NC/CL-20 composite explosive which produced by the electrostatic spraying method,achieves physically uniform distribution of the components including NC,CL-20,Si.The addition of Si promotes the thermal decomposition of CL-20.In comparison to the NC/CL-20 composite explosive,the activation energy of the Si/NC/CL-20 composite explosive decreases by 16.78 kJ/mol,and the self-accelerated decomposition temperature and the critical temperature of thermal explosion decreases by 3.12 K and 2.61 K,respectively.Furthermore,Si/NC/CL-20 composite explosive has shorter ignition delay time and faster combustion rate compared to the NC/CL-20 composite explosive,which shows that Si can improve the combustion performance of CL-20.展开更多
Available onlineSilicon monoxide(SiO)is a promising anode material fo r lithium-ion batteries(LIBs)due to its high theoretical specific capacity(~2400 mAh/g),low working potential(<0.5 V vs.Li^+/Li),low cost,easy s...Available onlineSilicon monoxide(SiO)is a promising anode material fo r lithium-ion batteries(LIBs)due to its high theoretical specific capacity(~2400 mAh/g),low working potential(<0.5 V vs.Li^+/Li),low cost,easy synthesis,nontoxicity,abundant natural source and smaller volume expansion than Si.However,low intrinsic electrical conductivity,low initial Coulombic efficiency(ICE)and inevitable volume expansion(~200%)impede its practical application.Here we fabricate SiO/wrinkled MXene composite(SiO-WM)by an electrostatic self-assembly method.Importantly,this method is simple,scalable and taking into account all the issues of SiO.As a result,the SiO-WM exhibits imp roved rate capability,cycling performance and ICE than bare SiO.展开更多
Constructing electrode materials with large capacity and good conductivity is an effective approach to improve the capacitor performance of asymmetric supercapacitors(ASCs).In this paper,ZnCo_(2)S_(4)core-shell nanosp...Constructing electrode materials with large capacity and good conductivity is an effective approach to improve the capacitor performance of asymmetric supercapacitors(ASCs).In this paper,ZnCo_(2)S_(4)core-shell nanospheres are constructed by two-step hydrothermal method.In order to improve the chemical activity of ZnCo_(2)S_(4),ZnCo_(2)S_(4)is activated using cetyltrimethylammonium bromide(CTAB).Then,MXene nanosheets are fixed on the surface of ZnCo_(2)S_(4)by electrostatic selfassembly method to improve the specific surface area of ZnCo_(2)S_(4)and MXene-wrapped ZnCo_(2)S_(4)composite is prepared in this work.Owing to the synergy effect between MXene nanosheets and ZnCo_(2)S_(4)core-shell nanospheres,the as-prepared composite displays fast ion transfer rate and charge/discharge process.The capacity of the MXenewrapped ZnCo_(2)S_(4)composite can reach 1072 F·g^(-1),which is far larger than that of ZnCo_(2)S_(4)(407 F·g^(-1))at 1 A·g^(-1).An ASC device is assembled,which delivers 1.7 V potential window and superior cyclic stability(95.41%capacitance retention).Furthermore,energy density of this device is up to 30.46 Wh·kg^(-1)at a power density of850 W·kg^(-1).The above results demonstrate that MXenewrapped ZnCo_(2)S_(4)composite has great application prospects in electrochemical energy storage field.展开更多
The cooperative electrostatic attraction and π-π aromatic stacking interactions between tetrahedral tetrapyridinium TP and three tetraanionic tetraphenylethylene derivatives TPE-1～3 led to the formation of a new ki...The cooperative electrostatic attraction and π-π aromatic stacking interactions between tetrahedral tetrapyridinium TP and three tetraanionic tetraphenylethylene derivatives TPE-1～3 led to the formation of a new kind of supramolecular polymer networks in water, which have been confirmed by^1 H NMR,fluorescence, isothermal titration calorimetric(ITC) and dynamic light scattering(DLS) experiments. ITC studies show that the contributions of enthalpy and entropy were comparable, reflecting the importance of hydrophobicity in driving the intermolecular aromatic stacking. DLS experiments indicate that the linear supramolecular polymers formed by these tetratopic monomers further aggregated into networks of 10~2-nm size.展开更多
Gold colloids were prepared by citrate-induced reduction of hydrogen tetrachloroaurale, and gold nanoparticles were electrostatically self-assembled with poly( diallyldimethylammonium chloride) into multi-layer thin f...Gold colloids were prepared by citrate-induced reduction of hydrogen tetrachloroaurale, and gold nanoparticles were electrostatically self-assembled with poly( diallyldimethylammonium chloride) into multi-layer thin films on si/icon and quartz substrates. The paniculate thin films were characterized by UV-vis spea-troscopy, surface, enhanced Raman scattering, atomic force microscopy and resistivity measurements. Due to the interparticle coupling between individual gold particles, an obvious collective particle plasmon resonance was ob-served on UV-vis spectra , and the particulate thin films exhibited a strong SERS effect. For multilayer thin films with a high particle coverage on substrates , resistivity of the order of 10-4 Ω·cm was yielded.展开更多
The self-assembled nanoparticles(SAN)formed during the decoction process of traditional Chinese medicine(TCM)exhibit non-uniform particle sizes and a tendency for aggregation.Our group found that the p H-driven method...The self-assembled nanoparticles(SAN)formed during the decoction process of traditional Chinese medicine(TCM)exhibit non-uniform particle sizes and a tendency for aggregation.Our group found that the p H-driven method can improve the self-assembly phenomenon of Herpetospermum caudigerum Wall.,and the SAN exhibited uniform particle size and demonstrated good stability.In this paper,we analyzed the interactions between the main active compound,herpetrione(Her),and its main carrier,Herpetospermum caudigerum Wall.polysaccharide(HCWP),along with their self-assembly mechanisms under different p H values.The binding constants of Her and HCWP increase with rising p H,leading to the formation of Her-HCWP SAN with a smaller particle size,higher zeta potential,and improved thermal stability.While the contributions of hydrogen bonding and electrostatic attraction to the formation of Her-HCWP SAN increase with rising p H,the hydrophobic force consistently plays a dominant role.This study enhances our scientific understanding of the self-assembly phenomenon of TCM improved by p H driven method.展开更多
Horseradish peroxidase monolayer was assembled on the surface of PET-CO2 substrate. The reaction kinetics of HRP/PET film and H2O2 in micro reactor was studied using improved spectrophotometer. The relative activity ...Horseradish peroxidase monolayer was assembled on the surface of PET-CO2 substrate. The reaction kinetics of HRP/PET film and H2O2 in micro reactor was studied using improved spectrophotometer. The relative activity of self-assembly HRP/PET film still remains above 80% after storing for 150 days at 4℃. When applied to determination of H2O2 in sample, the recoveries of H2O2 are 96.5%~101.1%.展开更多
Janus films with asymmetric physical/chemical properties have attracted con siderable attention due to their promising applications in personal thermal management,electronic skin s,sensors,actuators,etc.However,tradit...Janus films with asymmetric physical/chemical properties have attracted con siderable attention due to their promising applications in personal thermal management,electronic skin s,sensors,actuators,etc.However,traditional methods for fabricating Janus films conventionally need the assistance of an interface or auxiliary equipment,which are usually complex and time-consuming.Herein,flexible poly(vinyl alcohol)(PVA)/graphene oxide(GO)/h-BN(recorded as PVA/GO/h-BN)Janus films with thermally,optically,and electrically anisotropic properties are fabricated by a simple density deposition self-assem bly method,which just utilizes the density difference between GO and h-BN during water evaporation.Experimental results show that the two sides of the acquired Janus films have obvious asymmetric characteristics.In the original state of the PVA/GO/h-BN Janus films,the thermal conductivity of the GO side(10.06 W·m^(-1)·K^(-1))is generally lower than that of the h-BN side(10.48W·m^(-1)·K^(-1)).But after GO is reduced,the thermal conductivity of the rGO side reaches 12.17 W·m^(-1)·K^(-1),surpassing that of the h-BN side.In addition,the relative reflectance of the h-BN side of Janus film is also significantly higher than that of the rGO side,and the su rface resistance difference between the two sides is about 4 orders of magnitude.The prepared PVA/GO/h-BN Janus films show great application potential in human thermal management,light conversion switches,and electronic skins.This study provides a simple and versatile strategy for fabricating Janus films with multifunctional(such as thermal,optical,and electrical)anisotropies.展开更多
Gold colloid was prepared by chemical reduction of hydrogen tetrachloroaurate, polyelectrolyte/gold nanoparticle/silica nanoparticie composite films were fabricated via an electrostatic self-assembly multilayer method...Gold colloid was prepared by chemical reduction of hydrogen tetrachloroaurate, polyelectrolyte/gold nanoparticle/silica nanoparticie composite films were fabricated via an electrostatic self-assembly multilayer method, and composite films of gold nanoparticle dispersed in silica matrix were formed by heat-treating the polyelectrolyte/gold nanoparticle/silica nanoparticle composite films to eliminate the polyelectrolyte. The obtained composite films were investigated with UV-vis, TEM, AFM and XRD. The results show that the self-assembly multilayer method is a promising process to produce composite films of gold nanoparticle-dispersed in organic and/or inorganic matrixes.展开更多
The paper presents two methods for the formulation of free vibration analysis of collecting electrodes of precipitators.The first,called the hybrid finite element method, combines the finit element method used for cal...The paper presents two methods for the formulation of free vibration analysis of collecting electrodes of precipitators.The first,called the hybrid finite element method, combines the finit element method used for calculations of spring deformations with the rigid finite element method used to reflect mass and geometrical features,which is called the hybrid finite element method.As a result,a model with a diagonal mass matrix is obtained.Due to a specific geometry of the electrodes,which are long plates of complicated shapes,the second method proposed is the strip method which is a semi-analytical method.The strip method allows us to formulate the equations of motion with a considerably smaller number of generalized coordinates.Results of numerical calculations obtained by both methods are compared with those obtained using commercial software like ANSYS and ABAQUS.Good compatibility of results is achieved.展开更多
In order to analyze the electrostatic field concerned with electrostatic proximity fuze problem using the available finite analysis software package, the technology to model the problem with a scale reduction object a...In order to analyze the electrostatic field concerned with electrostatic proximity fuze problem using the available finite analysis software package, the technology to model the problem with a scale reduction object and boundary was presented. The boundary is determined by the maximum distance the sensor can detect. The object model is obtained by multiplying the terms in Poisson's equation with a scale reduction factor and the real value can be reconstructed with the same reverse process after software calculation. Using the finite element analysis program, the simulation value is close to the theoretical value with a little error. The boundary determination and scale reduction method is suitable to modeling the irregular electrostatic field around air targets, such as airplane, missile and so on, which is based on commonly used personal computer (PC). The technology reduces the calculation and storage cost greatly.展开更多
The model and analysis of the cantilever beam adhesion problem under the action of electrostatic force are given. Owing to the nonlinearity of electrostatic force, the analytical solution for this kind of problem is...The model and analysis of the cantilever beam adhesion problem under the action of electrostatic force are given. Owing to the nonlinearity of electrostatic force, the analytical solution for this kind of problem is not available. In this paper, a systematic method of generating polynomials which are the exact beam solutions of the loads with di?erent distributions is provided. The polynomials are used to approximate the beam displacement due to electrostatic force. The equilibrium equation o?ers an answer to how the beam deforms but no information about the unstuck length. The derivative of the functional with respect to the unstuck length o?ers such information. But to compute the functional it is necessary to know the beam deformation. So the problem is iteratively solved until the results are converged. Galerkin and Newton-Raphson methods are used to solve this nonlinear problem. The e?ects of dielectric layer thickness and electrostatic voltage on the cantilever beam stiction are studied. The method provided in this paper exhibits good convergence. For the adhesion problem of cantilever beam without electrostatic voltage, the analytical solution is available and is also exactly matched by the computational results given by the method presented in this paper.展开更多
Photocatalytic dual-functional reaction under visible light irradiation represents a sustainable development strategy.In detail,H2production coupled with benzylamine oxidation can remarkably lower the cost by replacin...Photocatalytic dual-functional reaction under visible light irradiation represents a sustainable development strategy.In detail,H2production coupled with benzylamine oxidation can remarkably lower the cost by replacing sacrificial agents.In this work,Cd S quantum dots(Cd S QDs)were successfully loaded onto the surface of a porphyrinic metal-organic framework(Pd-PCN-222)by the electrostatic selfassembly at room temperature.The consequent Pd-PCN-222/CdS heterojunction composites displayed superb photocatalytic activity under visible light irradiation,achieving a H2production and benzylamine oxidation rate of 5069 and 3717μmol g^(-1)h^(-1)with>99%selectivity in 3 h.There is no noticeable loss of catalytic capability during three successive runs.Mechanistic studies by in situ electron spin resonance and X-ray photoelectron spectroscopy disclosed that CdS QDs injected photoexcited electrons to Pd-PCN-222 and then Zr6clusters under visible-light irradiation,and thus Cd S QDs and Zr6clusters behave as the photocatalytic oxidation and reduction centers,respectively.展开更多
Here, large-scale and uniform hexagonal zinc oxide(ZnO) nanosheet films were deposited onto indium tin oxide(ITO)-coated transparent conducting glass substrates via a facile galvanic displacement deposition process. C...Here, large-scale and uniform hexagonal zinc oxide(ZnO) nanosheet films were deposited onto indium tin oxide(ITO)-coated transparent conducting glass substrates via a facile galvanic displacement deposition process. Compared with other commonly used solution methods, this process avoids high temperature and electric power as well as supporting agents to make it simple and cost-effective. The as-fabricated ZnO nanosheet films have uniform hexagonal wurtzite structure. The photoelectrochemical(PEC) cell based on ZnO nanosheet film/ITO photoelectrode was also fabricated and its performance was improved by optimizing the solution concentration. A higher photocurrent density of*500 l A cm^(-2)under AM 1.5 G simulated illumination of 100 m W cm^(-2)with zero bias potential(vs. Ag/AgCl electrode) was obtained, which may ascribe to the increased surface-to-volume ratio of disordered Zn O nanosheet arrays. Our developed method may be used to deposit other oxide semiconductors, and the Zn O nanosheet film/ITO PEC cell can be used to design low-cost optoelectronic and photoelectrochemical devices.展开更多
In this paper, the effect of van der Waals （vdW） force on the pull-in behavior of electrostatically actuated nano/micromirrors is investigated. First, the minimum po- tential energy principle is utilized to find the...In this paper, the effect of van der Waals （vdW） force on the pull-in behavior of electrostatically actuated nano/micromirrors is investigated. First, the minimum po- tential energy principle is utilized to find the equation gov- erning the static behavior of nano/micromirror under electro- static and vdW forces. Then, the stability of static equilib- rium points is analyzed using the energy method. It is found that when there exist two equilibrium points, the smaller one is stable and the larger one is unstable. The effects of dif- ferent design parameters on the mirror＇s pull-in angle and pull-in voltage are studied and it is found that vdW force can considerably reduce the stability limit of the mirror. At the end, the nonlinear equilibrium equation is solved numer- ically and analytically using homotopy perturbation method （HPM）. It is observed that a sixth order perturbation approx- imation can precisely model the mirror＇s behavior. The re- suits of this paper can be used for stable operation design and safe fabrication of torsional nano/micro actuators.展开更多
The plane medium and point charge are regarded as an integral system. The static field＇s distribution situation of the point charge is studied in the medium structure of plane division layers by using mirror image me...The plane medium and point charge are regarded as an integral system. The static field＇s distribution situation of the point charge is studied in the medium structure of plane division layers by using mirror image method, drawing the point charge＇s calculation expression of the electric potential in every medium space. The mathematics model of passive electrostatic detecting people through the medium （regular distance between the goal point charge and the medium） is established, using MATLAB software to carry out emulation of the model and analysing the result, establishing the theoretical foundation for studying the technology of the passive static detecting people through the wall.展开更多
Metal-organic framework(MOF)-derived carbon composites have been considered as the promising materials for energy storage.However,the construction of MOF-based composites with highly controllable mode via the liquid-l...Metal-organic framework(MOF)-derived carbon composites have been considered as the promising materials for energy storage.However,the construction of MOF-based composites with highly controllable mode via the liquid-liquid synthesis method has a great challenge because of the simultaneous heterogeneous nucleation on substrates and the self-nucleation of individual MOF nanocrystals in the liquid phase.Herein,we report a bidirectional electrostatic generated self-assembly strategy to achieve the precisely controlled coatings of single-layer nanoscale MOFs on a range of substrates,including carbon nanotubes(CNTs),graphene oxide(GO),MXene,layered double hydroxides(LDHs),MOFs,and SiO_(2).The obtained MOF-based nanostructured carbon composite exhibits the hierarchical porosity(V_(meso)/V_(micro)∶2.4),ultrahigh N content of 12.4 at.%and"dual electrical conductive networks."The assembled aqueous zinc-ion hybrid capacitor(ZIC)with the prepared nanocarbon composite as a cathode shows a high specific capacitance of 236 F g^(-1)at 0.5 A g^(-1),great rate performance of 98 F g^(-1)at 100 A g^(-1),and especially,an ultralong cycling stability up to 230000 cycles with the capacitance retention of 90.1%.This work develops a repeatable and general method for the controlled construction of MOF coatings on various functional substrates and further fabricates carbon composites for ZICs with ultrastability.展开更多
基金Funded by the Natural Science Foundation of Hebei Province, China (No. E2008000537)the Foundation for Development of Science and Technology of Hebei Province, China (No. 07215156)the Open Research Foundation of Key Laboratory of Advanced Civil Engineering Materials (Tongji University),Ministry of Education, China (No. 2010412)
文摘Electrostatic self-assembly method （ESAM） was used to prepare bentonite supported-nano titanium dioxide photocatalysts. The materials were characterized by X-ray diffraction （XRD）, fourier transform infrared spectroscopy （FT-IR） and scanning electron microscopy （SEM）. Methyl orange was used to estimate the photocatalytic activity of the materials. The effects of the calcination temperature and silane dosage on the photocatalytic activity of the samples were investigated. The experimental results show that the bentonite facilitates the formation of anatase and restrains the transformation of anatase to rutile. Part of nano-size TiO2 particles insert into the galleries of bentonite. The photocatalysts exhibit a synergistic effect of adsorption and photocatalysis on methyl orange. Photocatalysts prepared by ESAM method exhibit higher photocatalytic activity and better recycle ability than those of the traditional method.
文摘Anionic surfactant sodium lauryl sulfate(SDS), cationic surfactant palmityl trimethyl ammonium chloride(CTAC) and TiO_2 were used to prepare multilayer films on quartz optic fibers by the electrostatic self-assembly (ESA) method. The whole self-assemble process, the function of surfactant and the effect of TiO_2 slurry′s concentration to the self-assemble were discussed. The isoelectric point of TiO_2 slurry measured by experiment is 6.8. The results show that whatever the concentration of the TiO_2 dispersion, a flat and compact adsorbed monolayer on the optic fiber can be built in a stable dispersion at lower pH. There is a adsorbed equilibrium on the substrate (fiber)/solution interface when enough time of incubation is given. A rough and loosen adsorbed layer is formed on the fiber surface by immersed the substrate in a high pH dispersion (pH>10) because the presence of hydroxyl on particle surface. Film thickness can be controlled by controlling the number of layers in the film.
基金supported by the National Natural Science Foundation of China(No.62003269).
文摘Computing electrostatic interaction on non-cooperative targets with unknown meshes is crucial for electrostatic-based space on-orbit services.Although meshes for electrostatic interaction computations can be reconstructed from point clouds,they are usually too dense,leading to high computational costs.This paper presents an optimization method for converting dense meshes into optimal meshes,enabling fast and accurate computation of the electrostatic interaction by point clouds.First,the dense mesh reconstructed from point clouds is simplified into a coarse mesh using local operators.Second,the simplified mesh is refined by an iterative strategy that integrates a lightweight method of moments and an impedance matrix inheritance technique,ultimately yielding an optimal mesh for computing the electrostatic interaction.Simulation results show that our method effectively optimizes dense meshes,making electrostatic interaction computations using point clouds approximately 63.4 times more efficient than the previous method.
基金National Natural Science Foundation of China(No.22275150)。
文摘To study the influence of silicon(Si)on 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane(CL-20),NC/CL-20 composite explosives and Si/NC/CL-20 composite explosives were prepared by the electrostatic spraying method.The morphology,structure and thermal decomposition properties of the samples were analyzed using scanning electron microscopy(SEM),X-ray energy spectroscopy(EDS),infrared spectroscopy(FT-IR),and simultaneous thermal analyzer(TG-DSC).Additionally,the combustion process of the samples was tested using a high-speed camera.The results show that the addition of nano-Si contributes to the formation of composite explosives with regular morphology and smaller particle size.The Si/NC/CL-20 composite explosive has better and more uniform sphericity,with an average particle size of 73.4 nm,compared to the NC/CL-20 composite explosive.The Si/NC/CL-20 composite explosive which produced by the electrostatic spraying method,achieves physically uniform distribution of the components including NC,CL-20,Si.The addition of Si promotes the thermal decomposition of CL-20.In comparison to the NC/CL-20 composite explosive,the activation energy of the Si/NC/CL-20 composite explosive decreases by 16.78 kJ/mol,and the self-accelerated decomposition temperature and the critical temperature of thermal explosion decreases by 3.12 K and 2.61 K,respectively.Furthermore,Si/NC/CL-20 composite explosive has shorter ignition delay time and faster combustion rate compared to the NC/CL-20 composite explosive,which shows that Si can improve the combustion performance of CL-20.
基金supported by the National Natural Science Foundation of China(No.51972198)Shandong Provincial Science and Technology Key Project(No.2018GGX104002)+7 种基金Taishan Scholars Program of Shandong Province(No.tsqn201812002)Independent Innovation Foundation of Shandong Universitythe State Key Program of National Natural Science of China(Nos.61633015,51532005)the Young Scholars Program of Shandong University(No.2016WLJH03),the Project of the Taishan Scholar(No.ts201511004)Shandong Provincial Natural Science Foundation(No.ZR2017MB001)Discipline Construction of High-Level Talents of Shandong University(No.31370089963078)1000 Talent Plan program(No.31370086963030)the National Natural Science Foundation of China(No.21371108)。
文摘Available onlineSilicon monoxide(SiO)is a promising anode material fo r lithium-ion batteries(LIBs)due to its high theoretical specific capacity(~2400 mAh/g),low working potential(<0.5 V vs.Li^+/Li),low cost,easy synthesis,nontoxicity,abundant natural source and smaller volume expansion than Si.However,low intrinsic electrical conductivity,low initial Coulombic efficiency(ICE)and inevitable volume expansion(~200%)impede its practical application.Here we fabricate SiO/wrinkled MXene composite(SiO-WM)by an electrostatic self-assembly method.Importantly,this method is simple,scalable and taking into account all the issues of SiO.As a result,the SiO-WM exhibits imp roved rate capability,cycling performance and ICE than bare SiO.
基金financially supported by the Fundamental Research Funds for the Central Universities (No. 2019XKQYMS16)
文摘Constructing electrode materials with large capacity and good conductivity is an effective approach to improve the capacitor performance of asymmetric supercapacitors(ASCs).In this paper,ZnCo_(2)S_(4)core-shell nanospheres are constructed by two-step hydrothermal method.In order to improve the chemical activity of ZnCo_(2)S_(4),ZnCo_(2)S_(4)is activated using cetyltrimethylammonium bromide(CTAB).Then,MXene nanosheets are fixed on the surface of ZnCo_(2)S_(4)by electrostatic selfassembly method to improve the specific surface area of ZnCo_(2)S_(4)and MXene-wrapped ZnCo_(2)S_(4)composite is prepared in this work.Owing to the synergy effect between MXene nanosheets and ZnCo_(2)S_(4)core-shell nanospheres,the as-prepared composite displays fast ion transfer rate and charge/discharge process.The capacity of the MXenewrapped ZnCo_(2)S_(4)composite can reach 1072 F·g^(-1),which is far larger than that of ZnCo_(2)S_(4)(407 F·g^(-1))at 1 A·g^(-1).An ASC device is assembled,which delivers 1.7 V potential window and superior cyclic stability(95.41%capacitance retention).Furthermore,energy density of this device is up to 30.46 Wh·kg^(-1)at a power density of850 W·kg^(-1).The above results demonstrate that MXenewrapped ZnCo_(2)S_(4)composite has great application prospects in electrochemical energy storage field.
基金National Natural Science Foundation of China (Nos. 21432004 and 21472023) for financial support
文摘The cooperative electrostatic attraction and π-π aromatic stacking interactions between tetrahedral tetrapyridinium TP and three tetraanionic tetraphenylethylene derivatives TPE-1～3 led to the formation of a new kind of supramolecular polymer networks in water, which have been confirmed by^1 H NMR,fluorescence, isothermal titration calorimetric(ITC) and dynamic light scattering(DLS) experiments. ITC studies show that the contributions of enthalpy and entropy were comparable, reflecting the importance of hydrophobicity in driving the intermolecular aromatic stacking. DLS experiments indicate that the linear supramolecular polymers formed by these tetratopic monomers further aggregated into networks of 10~2-nm size.
基金This research was financially supported by China Scholar-ship Council and the Natural Science Foundation of Hubei Province (Project 2000J002)
文摘Gold colloids were prepared by citrate-induced reduction of hydrogen tetrachloroaurale, and gold nanoparticles were electrostatically self-assembled with poly( diallyldimethylammonium chloride) into multi-layer thin films on si/icon and quartz substrates. The paniculate thin films were characterized by UV-vis spea-troscopy, surface, enhanced Raman scattering, atomic force microscopy and resistivity measurements. Due to the interparticle coupling between individual gold particles, an obvious collective particle plasmon resonance was ob-served on UV-vis spectra , and the particulate thin films exhibited a strong SERS effect. For multilayer thin films with a high particle coverage on substrates , resistivity of the order of 10-4 Ω·cm was yielded.
基金supported by the National Natural Science Foundation of China(Nos.81873092,82174074)。
文摘The self-assembled nanoparticles(SAN)formed during the decoction process of traditional Chinese medicine(TCM)exhibit non-uniform particle sizes and a tendency for aggregation.Our group found that the p H-driven method can improve the self-assembly phenomenon of Herpetospermum caudigerum Wall.,and the SAN exhibited uniform particle size and demonstrated good stability.In this paper,we analyzed the interactions between the main active compound,herpetrione(Her),and its main carrier,Herpetospermum caudigerum Wall.polysaccharide(HCWP),along with their self-assembly mechanisms under different p H values.The binding constants of Her and HCWP increase with rising p H,leading to the formation of Her-HCWP SAN with a smaller particle size,higher zeta potential,and improved thermal stability.While the contributions of hydrogen bonding and electrostatic attraction to the formation of Her-HCWP SAN increase with rising p H,the hydrophobic force consistently plays a dominant role.This study enhances our scientific understanding of the self-assembly phenomenon of TCM improved by p H driven method.
文摘Horseradish peroxidase monolayer was assembled on the surface of PET-CO2 substrate. The reaction kinetics of HRP/PET film and H2O2 in micro reactor was studied using improved spectrophotometer. The relative activity of self-assembly HRP/PET film still remains above 80% after storing for 150 days at 4℃. When applied to determination of H2O2 in sample, the recoveries of H2O2 are 96.5%~101.1%.
基金financially supported by the National Natural Science Foundation of China(No.51373059)the Graphene Powder&Composite Materials Research Center of FujianXiamen Key Laboratory of Polymers and Electronic Materials。
文摘Janus films with asymmetric physical/chemical properties have attracted con siderable attention due to their promising applications in personal thermal management,electronic skin s,sensors,actuators,etc.However,traditional methods for fabricating Janus films conventionally need the assistance of an interface or auxiliary equipment,which are usually complex and time-consuming.Herein,flexible poly(vinyl alcohol)(PVA)/graphene oxide(GO)/h-BN(recorded as PVA/GO/h-BN)Janus films with thermally,optically,and electrically anisotropic properties are fabricated by a simple density deposition self-assem bly method,which just utilizes the density difference between GO and h-BN during water evaporation.Experimental results show that the two sides of the acquired Janus films have obvious asymmetric characteristics.In the original state of the PVA/GO/h-BN Janus films,the thermal conductivity of the GO side(10.06 W·m^(-1)·K^(-1))is generally lower than that of the h-BN side(10.48W·m^(-1)·K^(-1)).But after GO is reduced,the thermal conductivity of the rGO side reaches 12.17 W·m^(-1)·K^(-1),surpassing that of the h-BN side.In addition,the relative reflectance of the h-BN side of Janus film is also significantly higher than that of the rGO side,and the su rface resistance difference between the two sides is about 4 orders of magnitude.The prepared PVA/GO/h-BN Janus films show great application potential in human thermal management,light conversion switches,and electronic skins.This study provides a simple and versatile strategy for fabricating Janus films with multifunctional(such as thermal,optical,and electrical)anisotropies.
基金This work was supported by the Natural Science Foundation of Hubei Province(Project No.2000J002)
文摘Gold colloid was prepared by chemical reduction of hydrogen tetrachloroaurate, polyelectrolyte/gold nanoparticle/silica nanoparticie composite films were fabricated via an electrostatic self-assembly multilayer method, and composite films of gold nanoparticle dispersed in silica matrix were formed by heat-treating the polyelectrolyte/gold nanoparticle/silica nanoparticle composite films to eliminate the polyelectrolyte. The obtained composite films were investigated with UV-vis, TEM, AFM and XRD. The results show that the self-assembly multilayer method is a promising process to produce composite films of gold nanoparticle-dispersed in organic and/or inorganic matrixes.
基金Research is financed from the project NR03-0036-04/2008
文摘The paper presents two methods for the formulation of free vibration analysis of collecting electrodes of precipitators.The first,called the hybrid finite element method, combines the finit element method used for calculations of spring deformations with the rigid finite element method used to reflect mass and geometrical features,which is called the hybrid finite element method.As a result,a model with a diagonal mass matrix is obtained.Due to a specific geometry of the electrodes,which are long plates of complicated shapes,the second method proposed is the strip method which is a semi-analytical method.The strip method allows us to formulate the equations of motion with a considerably smaller number of generalized coordinates.Results of numerical calculations obtained by both methods are compared with those obtained using commercial software like ANSYS and ABAQUS.Good compatibility of results is achieved.
文摘In order to analyze the electrostatic field concerned with electrostatic proximity fuze problem using the available finite analysis software package, the technology to model the problem with a scale reduction object and boundary was presented. The boundary is determined by the maximum distance the sensor can detect. The object model is obtained by multiplying the terms in Poisson's equation with a scale reduction factor and the real value can be reconstructed with the same reverse process after software calculation. Using the finite element analysis program, the simulation value is close to the theoretical value with a little error. The boundary determination and scale reduction method is suitable to modeling the irregular electrostatic field around air targets, such as airplane, missile and so on, which is based on commonly used personal computer (PC). The technology reduces the calculation and storage cost greatly.
文摘The model and analysis of the cantilever beam adhesion problem under the action of electrostatic force are given. Owing to the nonlinearity of electrostatic force, the analytical solution for this kind of problem is not available. In this paper, a systematic method of generating polynomials which are the exact beam solutions of the loads with di?erent distributions is provided. The polynomials are used to approximate the beam displacement due to electrostatic force. The equilibrium equation o?ers an answer to how the beam deforms but no information about the unstuck length. The derivative of the functional with respect to the unstuck length o?ers such information. But to compute the functional it is necessary to know the beam deformation. So the problem is iteratively solved until the results are converged. Galerkin and Newton-Raphson methods are used to solve this nonlinear problem. The e?ects of dielectric layer thickness and electrostatic voltage on the cantilever beam stiction are studied. The method provided in this paper exhibits good convergence. For the adhesion problem of cantilever beam without electrostatic voltage, the analytical solution is available and is also exactly matched by the computational results given by the method presented in this paper.
基金support from the National Natural Science Foundation of China(Nos.21773314,21821003 and 21890382)the Guangdong Natural Science Funds for Distinguished Young Scholar(No.2019B151502017)。
文摘Photocatalytic dual-functional reaction under visible light irradiation represents a sustainable development strategy.In detail,H2production coupled with benzylamine oxidation can remarkably lower the cost by replacing sacrificial agents.In this work,Cd S quantum dots(Cd S QDs)were successfully loaded onto the surface of a porphyrinic metal-organic framework(Pd-PCN-222)by the electrostatic selfassembly at room temperature.The consequent Pd-PCN-222/CdS heterojunction composites displayed superb photocatalytic activity under visible light irradiation,achieving a H2production and benzylamine oxidation rate of 5069 and 3717μmol g^(-1)h^(-1)with>99%selectivity in 3 h.There is no noticeable loss of catalytic capability during three successive runs.Mechanistic studies by in situ electron spin resonance and X-ray photoelectron spectroscopy disclosed that CdS QDs injected photoexcited electrons to Pd-PCN-222 and then Zr6clusters under visible-light irradiation,and thus Cd S QDs and Zr6clusters behave as the photocatalytic oxidation and reduction centers,respectively.
基金supported by the National Major Basic Research Project of 2012CB934302the National 863 Program2011AA050518+1 种基金the Natural Science Foundation of China(Grant No.1117419711574203 and 61234005)
文摘Here, large-scale and uniform hexagonal zinc oxide(ZnO) nanosheet films were deposited onto indium tin oxide(ITO)-coated transparent conducting glass substrates via a facile galvanic displacement deposition process. Compared with other commonly used solution methods, this process avoids high temperature and electric power as well as supporting agents to make it simple and cost-effective. The as-fabricated ZnO nanosheet films have uniform hexagonal wurtzite structure. The photoelectrochemical(PEC) cell based on ZnO nanosheet film/ITO photoelectrode was also fabricated and its performance was improved by optimizing the solution concentration. A higher photocurrent density of*500 l A cm^(-2)under AM 1.5 G simulated illumination of 100 m W cm^(-2)with zero bias potential(vs. Ag/AgCl electrode) was obtained, which may ascribe to the increased surface-to-volume ratio of disordered Zn O nanosheet arrays. Our developed method may be used to deposit other oxide semiconductors, and the Zn O nanosheet film/ITO PEC cell can be used to design low-cost optoelectronic and photoelectrochemical devices.
文摘In this paper, the effect of van der Waals （vdW） force on the pull-in behavior of electrostatically actuated nano/micromirrors is investigated. First, the minimum po- tential energy principle is utilized to find the equation gov- erning the static behavior of nano/micromirror under electro- static and vdW forces. Then, the stability of static equilib- rium points is analyzed using the energy method. It is found that when there exist two equilibrium points, the smaller one is stable and the larger one is unstable. The effects of dif- ferent design parameters on the mirror＇s pull-in angle and pull-in voltage are studied and it is found that vdW force can considerably reduce the stability limit of the mirror. At the end, the nonlinear equilibrium equation is solved numer- ically and analytically using homotopy perturbation method （HPM）. It is observed that a sixth order perturbation approx- imation can precisely model the mirror＇s behavior. The re- suits of this paper can be used for stable operation design and safe fabrication of torsional nano/micro actuators.
文摘The plane medium and point charge are regarded as an integral system. The static field＇s distribution situation of the point charge is studied in the medium structure of plane division layers by using mirror image method, drawing the point charge＇s calculation expression of the electric potential in every medium space. The mathematics model of passive electrostatic detecting people through the medium （regular distance between the goal point charge and the medium） is established, using MATLAB software to carry out emulation of the model and analysing the result, establishing the theoretical foundation for studying the technology of the passive static detecting people through the wall.
基金financial support from Project funded by National Natural Science Foundation of China(52172038,22179017)funding from Dalian University of Technology Open Fund for Large Scale Instrument Equipment
文摘Metal-organic framework(MOF)-derived carbon composites have been considered as the promising materials for energy storage.However,the construction of MOF-based composites with highly controllable mode via the liquid-liquid synthesis method has a great challenge because of the simultaneous heterogeneous nucleation on substrates and the self-nucleation of individual MOF nanocrystals in the liquid phase.Herein,we report a bidirectional electrostatic generated self-assembly strategy to achieve the precisely controlled coatings of single-layer nanoscale MOFs on a range of substrates,including carbon nanotubes(CNTs),graphene oxide(GO),MXene,layered double hydroxides(LDHs),MOFs,and SiO_(2).The obtained MOF-based nanostructured carbon composite exhibits the hierarchical porosity(V_(meso)/V_(micro)∶2.4),ultrahigh N content of 12.4 at.%and"dual electrical conductive networks."The assembled aqueous zinc-ion hybrid capacitor(ZIC)with the prepared nanocarbon composite as a cathode shows a high specific capacitance of 236 F g^(-1)at 0.5 A g^(-1),great rate performance of 98 F g^(-1)at 100 A g^(-1),and especially,an ultralong cycling stability up to 230000 cycles with the capacitance retention of 90.1%.This work develops a repeatable and general method for the controlled construction of MOF coatings on various functional substrates and further fabricates carbon composites for ZICs with ultrastability.
