Modeling and simulation have emerged as an indispensable approach to create numerical experiment platforms and study engineering systems.However,the increasingly complicated systems that engineers face today dramatica...Modeling and simulation have emerged as an indispensable approach to create numerical experiment platforms and study engineering systems.However,the increasingly complicated systems that engineers face today dramatically challenge state-of-the-art modeling and simulation approaches.Such complicated systems,which are composed of not only continuous states but also discrete events,and which contain complex dynamics across multiple timescales,are defined as generalized hybrid systems(GHSs)in this paper.As a representative GHS,megawatt power electronics(MPE)systems have been largely integrated into the modern power grid,but MPE simulation remains a bottleneck due to its unacceptable time cost and poor convergence.To address this challenge,this paper proposes the numerical convex lens approach to achieve state-discretized modeling and simulation of GHSs.This approach transforms conventional time-discretized passive simulations designed for pure-continuous systems into state-discretized selective simulations designed for GHSs.When this approach was applied to a largescale MPE-based renewable energy system,a 1000-fold increase in simulation speed was achieved,in comparison with existing software.Furthermore,the proposed approach uniquely enables the switching transient simulation of a largescale megawatt system with high accuracy,compared with experimental results,and with no convergence concerns.The numerical convex lens approach leads to the highly efficient simulation of intricate GHSs across multiple timescales,and thus significantly extends engineers’capability to study systems with numerical experiments.展开更多
This study presents an electronics system for cosmic X-ray polarization detection(CXPD).The CXPD was designed as a high-sensitivity soft X-ray polarimeter with a measurement energy range of 2-10 keV carried by a CubeS...This study presents an electronics system for cosmic X-ray polarization detection(CXPD).The CXPD was designed as a high-sensitivity soft X-ray polarimeter with a measurement energy range of 2-10 keV carried by a CubeSat.A stable and functionally complete electronics system under power and space constraints is a key challenge.The complete CXPD electronics system(CXPDES)comprises hardware and firmware.CXPDES adopts a three-layer electronic board structure based on functionality and available space.Two gas pixel detectors(GPDs)were placed on the top layer board,and CXPDES provided the GPDs with voltages up to-4000 V.Each GPD signal was digitized,compressed,encoded,and stored before being transmitted to the ground.The CXPDES provided stable and high-speed communication based on a scheme that separated command and data transmission,and it supports the CXPDES in-orbit upgrade.In addition,environmental monitors,silicon photomultiplier(SiPM)triggers,power management,GPDs configuration,and mode switches were included in the overall operating logic of the CXPDES.The results obtained by testing the CXPDES showed that it satisfied all the requirements of CXPD.The CXPDES provides design experience and technological readiness for future large-area X-ray polarimetry missions.展开更多
The rapid pace of change in the wide band gap(WBG)power semiconductor area has led to an explosion in potential uses for WBG devices in a huge variety of applications.The applications include automotive,aerospace and ...The rapid pace of change in the wide band gap(WBG)power semiconductor area has led to an explosion in potential uses for WBG devices in a huge variety of applications.The applications include automotive,aerospace and traction applications,as well as grid related or charging systems,with the potential to provide paradigm shifts in performance and efficiency over Silicon devices in current use today.Despite these exciting developments,however,there are still many outstanding challenges for both researchers and industry to solve before WBG technology becomes pervasive.In this paper we will explore some of these challenges and highlight the strengths of WBG devices,some of the specific issues for machine drives and develop some potential solutions for future developments in power electronics.展开更多
Automated simulating of power electronics systems is currently performed by means of nodal analysis method combined with implicit numerical integration schemes. Such method allows to find transient solutions, even whe...Automated simulating of power electronics systems is currently performed by means of nodal analysis method combined with implicit numerical integration schemes. Such method allows to find transient solutions, even when the integrated system is stiff, however, it leads to some difficulties when simulating big systems and sometimes to the deterioration of computations quality, that is reflected in decrease in accuracy, oscillations of solutions, which are not present in the initial model. This paper analyzes the shortcomings of this approach, and proposes to apply explicit numerical schemes with stability control on the integration step and with reduction of some of state variables. A brief description of the method of finding transient solutions and an example of the analysis are also given in the present paper.展开更多
Currently, the high-speed serial fiber-optic ring net communication is a main method for performing the distributed control network topology and control mode. Because of a network transmission delay inherent in the to...Currently, the high-speed serial fiber-optic ring net communication is a main method for performing the distributed control network topology and control mode. Because of a network transmission delay inherent in the topology, synchronization between nodes has become a critical issue which needs to be studied. The existing synchronization methods largely depend on the complex communication protocol. Therefore, this paper has proposed a method of automatic measurement and compensation of synchronization delay, and analyzed its operating principle and implementation procedure in detail. The results obtained from the experiments prove the proposed method to be correct, effective and practicable.展开更多
Magnetic mass spectrometer electronics system is mainly read out 420 channels charge signal of the Faraday cup array detector. Each channel contains two ranges, and each channel can be arbitrary controlled to switch r...Magnetic mass spectrometer electronics system is mainly read out 420 channels charge signal of the Faraday cup array detector. Each channel contains two ranges, and each channel can be arbitrary controlled to switch range.An effective measuring range from 100 fC to 100 pC is required, and linearity error is less than 3.6%.展开更多
New electric power systems characterized by a high proportion of renewable energy and power electronics equipment face significant challenges due to high-frequency(HF)electromagnetic interference from the high-speed s...New electric power systems characterized by a high proportion of renewable energy and power electronics equipment face significant challenges due to high-frequency(HF)electromagnetic interference from the high-speed switching of power converters.To address this situation,this paper offers an in-depth review of HF interference problems and challenges originating from power electronic devices.First,the root cause of HF electromagnetic interference,i.e.,the resonant response of the parasitic parameters of the system to high-speed switching transients,is analyzed,and various scenarios of HF interference in power systems are highlighted.Next,the types of HF interference are summarized,with a focus on common-mode interference in grounding systems.This paper thoroughly reviews and compares various suppression methods for conducted HF interference.Finally,the challenges involved and suggestions for addressing emerging HF interference problems from the perspective of both power electronics equipment and power systems are discussed.This review aims to offer a structured understanding of HF interference problems and their suppression techniques for researchers and practitioners.展开更多
Permeable electronics promise improved physiological comfort,but remain constrained by limited functional integration and poor mechanical robustness.Here,we report a three-dimensional(3D)permeable electronic system th...Permeable electronics promise improved physiological comfort,but remain constrained by limited functional integration and poor mechanical robustness.Here,we report a three-dimensional(3D)permeable electronic system that overcomes these challenges by combining electrospun SEBS nanofiber mats,high-resolution liquid metal conductors patterned via thermal imprinting(50μm),and a strain isolators(SIL)that protects vertical interconnects(VIAs)from stress concentration.This architecture achieves ultrahigh air permeability(>5.09 m L cm^(-2)min^(-1)),exceptional stretchability(750%fracture strain),and reliable conductivity maintained through more than 32,500 strain cycles.Leveraging these advances,we have integrated multilayer circuits,strain sensors,and a three-axis accelerometer to achieve a fully integrated,stretchable,permeable wireless real-time gesture recognition glove.The system enables accurate sign language interpretation(98%)and seamless robotic hand control,demonstrating its potential for assistive technologies.By uniting comfort,durability,and high-density integration,this work establishes a versatile platform for nextgeneration wearable electronics and interactive human-robot interfaces.展开更多
Traditional digitizers for signal readout of PET detectors are based on commercial analog-to-digital converters(ADC).However,the cost and power consumption of an entire electronic readout system based on digitizers fo...Traditional digitizers for signal readout of PET detectors are based on commercial analog-to-digital converters(ADC).However,the cost and power consumption of an entire electronic readout system based on digitizers for a PET scanner are high.To address this problem,a soft-core ADC based on a field-programmable gate array(FPGA)was proposed.An FPGA-based ADC(FPGA-ADC)combines low loss and high performance.To achieve good performance,the FPGA-ADC requires three calibrations:time-to-digital converter(TDC)length calibration,TDC alignment calibration,and TDC-to-ADC calibration.A prototype front-end electronics based on FPGA-ADC was built to evaluate the performance of time-of-flight positron emission tomography(TOF PET)detectors.Each PET detector consists of a LYSO crystal single-ended coupled to a silicon photomultiplier(SiPM).The experimental results show that the full-width at half-maximum(FWHM)energy resolution for 511 keV gamma photons after saturation correction of the SiPM was 12.3%.The FWHM coincidence timing resolution(CTR)of the TOF PET detector with the readout of the front-end electronic prototype is 385.2 ps.FPGA-ADCbased front-end electronics are very promising for multichannel,low-cost,highly integrated,and power-efficient readout electronic systems for radiation detector applications.展开更多
A rapidly growing field is piezoresistive sensor for accurate respiration rate monitoring to suppress the worldwide respiratory illness.However,a large neglected issue is the sensing durability and accuracy without in...A rapidly growing field is piezoresistive sensor for accurate respiration rate monitoring to suppress the worldwide respiratory illness.However,a large neglected issue is the sensing durability and accuracy without interference since the expiratory pressure always coupled with external humidity and temperature variations,as well as mechanical motion artifacts.Herein,a robust and biodegradable piezoresistive sensor is reported that consists of heterogeneous MXene/cellulose-gelation sensing layer and Ag-based interdigital electrode,featuring customizable cylindrical interface arrangement and compact hierarchical laminated architecture for collectively regulating the piezoresistive response and mechanical robustness,thereby realizing the long-term breath-induced pressure detection.Notably,molecular dynamics simulations reveal the frequent angle inversion and reorientation of MXene/cellulose in vacuum filtration,driven by shear forces and interfacial interactions,which facilitate the establishment of hydrogen bonds and optimize the architecture design in sensing layer.The resultant sensor delivers unprecedented collection features of superior stability for off-axis deformation(0-120°,~2.8×10^(-3) A)and sensing accuracy without crosstalk(humidity 50%-100%and temperature 30-80).Besides,the sensor-embedded mask together with machine learning models is achieved to train and classify the respiration status for volunteers with different ages(average prediction accuracy~90%).It is envisioned that the customizable architecture design and sensor paradigm will shed light on the advanced stability of sustainable electronics and pave the way for the commercial application in respiratory monitory.展开更多
Reed membrane,a natural cellulosic material traditionally used in musical instruments,holds promise in flexible electronics due to its abundance,low cost,and excellent biocompatibility.However,its native form contains...Reed membrane,a natural cellulosic material traditionally used in musical instruments,holds promise in flexible electronics due to its abundance,low cost,and excellent biocompatibility.However,its native form contains water-soluble ions and lipid-soluble waxes that hinder performance in acoustic and electronics by compromising electrical insulation and mechanical stability.Here,supercritical fluid superposition purification(SCSP-WA)is introduced,which utilizes supercritical CO_(2)with water and acetone as bipolar co-solvents to selectively remove these impurities.Post-SCSP-WA treatment,the reed membrane exhibits significant enhancements in mechanical strength and electrical insulation,achieving a 4-fold increase in elongation at break,improved tensile strength and Young’s modulus,and a 98.5%reduction in leakage current,all while maintaining low and stable capacitance.These improvements stem from the restructuring of the fibrous network into a porous,interconnected microstructure.Material characterization(X-ray photoelectron spectroscopy(XPS),Fourier-transform infrared spectroscopy(FTIR),and scanning electron microscopy(SEM))confirmed the effective removal of magnesium and waxy functional groups,along with enhanced fiber crosslinking.Cytotoxicity tests further validated the biocompatibility of the SCSP-WA-treated membranes.This environmentally sustainable approach expands the potential of reed membranes in flexible bioelectronics and bio-integrated acoustic systems.展开更多
Air-permeable and ultrathin conductive electrodes are essential for next-generation soft electronics,including breathable wearables,on-skin devices and biointegrated electronics.However,conventional metallization stra...Air-permeable and ultrathin conductive electrodes are essential for next-generation soft electronics,including breathable wearables,on-skin devices and biointegrated electronics.However,conventional metallization strategies,such as sputtering and ink-printing,often suffer from severe vertical charge leakage due to the porous and ultrathin characteristics of nanofibrous networks,leading to device short-circuiting,operational failure and limited vertical integration.Here,we present a solvent-selective dissolutionassisted transfer printing strategy to achieve surface-confined metallization of ultrathin,lightweight,and gas-permeable nanofibrous networks,enabling lateral conductivity while maintaining vertical insulation.This transfer printing process facilitates not only the rapid formation of conductive patterns on the surface of nanofibrous networks but also mechanical reinforcement through solvent evaporation-induced interlocked fiber-fiber welding.Meanwhile,the strategy preserves the high permeability of the nanofibrous networks and imparts a unique combination of surface conductivity(2Ωcm)and vertical insulativity(10^(11)Ωcm).The resulting anisotropic conductive networks enable low-voltage wearable heaters,high-sensitive pressure sensors,and ultralight temperature sensors.A pressure-temperature dual-modal sensing patch is further fabricated for intelligent grasping classification.The proposed surface-confined metallization strategy enables rapid fabrication of an anisotropic conductive network as a building block to construct air-permeable,ultrathin and lightweight wearable electronics.展开更多
As circuit feature sizes approach the nanoscale,traditional Copper(Cu)interconnects face significant hurdles posed by rising resistance-capacitance(RC)delay,electromigration,and high power dissipation.These limitation...As circuit feature sizes approach the nanoscale,traditional Copper(Cu)interconnects face significant hurdles posed by rising resistance-capacitance(RC)delay,electromigration,and high power dissipation.These limitations impose constraints on the scalability and reliability of future semiconductor technologies.Our paper describes the new Vertical multilayer Aluminium Boron Nitride Nanoribbon(AlBN)interconnect structure,integrated with Density functional theory(DFT)using first-principles calculations.This study explores AlBN-based nanostructures with doping of 1Cu,2Cu,1Fe(Iron),and 2Fe for the application of Very Large Scale Integration(VLSI)interconnects.The AlBN structure utilized the advantages of vertical multilayer interconnects to both reduce the RC delay while enhancing signal integrity.Key parameters like Fermi energy,bandgap,binding energy,conduction channels,quantum resistance,and RC delay were analyzed.Through modeling and large-scale simulation,the structural,electronic,and stability attributes of the AlBN interconnects are analyzed,and the results illustrate considerable improvements in signal propagation against Cu interconnect structures.These findings confirm the tunable,high-performance nature of AlBN-2Fe,making it a promising candidate for future high-speed,low-power VLSI interconnect technologies.We demonstrated an advanced energy-efficient interconnect that can be easily scaled for future nanoscale VLSI circuit design and gives rise to a next generation of viable interconnect technology for high-capacity,high-speed,reliable semiconductor technology.展开更多
Continuous monitoring of biosignals is essential for advancing early disease detection,personalized treatment,and health management.Flexible electronics,capable of accurately monitoring biosignals in daily life,have g...Continuous monitoring of biosignals is essential for advancing early disease detection,personalized treatment,and health management.Flexible electronics,capable of accurately monitoring biosignals in daily life,have garnered considerable attention due to their softness,conformability,and biocompatibility.However,several challenges remain,including imperfect skin-device interfaces,limited breathability,and insufficient mechanoelectrical stability.On-skin epidermal electronics,distinguished by their excellent conformability,breathability,and mechanoelectrical robustness,offer a promising solution for high-fidelity,long-term health monitoring.These devices can seamlessly integrate with the human body,leading to transformative advancements in future personalized healthcare.This review provides a systematic examination of recent advancements in on-skin epidermal electronics,with particular emphasis on critical aspects including material science,structural design,desired properties,and practical applications.We explore various materials,considering their properties and the corresponding structural designs developed to construct high-performance epidermal electronics.We then discuss different approaches for achieving the desired device properties necessary for long-term health monitoring,including adhesiveness,breathability,and mechanoelectrical stability.Additionally,we summarize the diverse applications of these devices in monitoring biophysical and physiological signals.Finally,we address the challenges facing these devices and outline future prospects,offering insights into the ongoing development of on-skin epidermal electronics for long-term health monitoring.展开更多
Conductive elastomers combining micromechanical sensitivity,lightweight adaptability,and environmental sustainability are critically needed for advanced flexible electronics requiring precise responsiveness and long-t...Conductive elastomers combining micromechanical sensitivity,lightweight adaptability,and environmental sustainability are critically needed for advanced flexible electronics requiring precise responsiveness and long-term wearability;however,the integration of these properties remains a significant challenge.Here,we present a biomass-derived conductive elastomer featuring a rationally engineered dynamic crosslinked network integrated with a tunable microporous architecture.This structural design imparts pronounced micromechanical sensitivity,an ultralow density(~0.25 g cm^(−3)),and superior mechanical compliance for adaptive deformation.Moreover,the unique micro-spring effect derived from the porous architecture ensures exceptional stretchability(>500%elongation at break)and superior resilience,delivering immediate and stable electrical response under both subtle(<1%)and large(>200%)mechanical stimuli.Intrinsic dynamic interactions endow the elastomer with efficient room temperature self-healing and complete recyclability without compromising performance.First-principles simulations clarify the mechanisms behind micropore formation and the resulting functionality.Beyond its facile and mild fabrication process,this work establishes a scalable route toward high-performance,sustainable conductive elastomers tailored for next-generation soft electronics.展开更多
Triclosan(TCS) poses harmful risks to ecosystems and human health owing to its endocrine-disrupting effects.Therefore,developing an efficient and sustainable technology to degrade TCS is urgently needed.Herein,cobalt ...Triclosan(TCS) poses harmful risks to ecosystems and human health owing to its endocrine-disrupting effects.Therefore,developing an efficient and sustainable technology to degrade TCS is urgently needed.Herein,cobalt oxyhydroxide @covalent organic frameworks(CoOOH@COFs) S-scheme heterojunction was synthesized,which combined the visible-light-driven photocatalysis and peroxymonosulfate(PMS) activation to synergistically generate abundant reactive oxygen species(ROSs) for TCS degradation.The degradation efficiency of TCS reached 100 % within 8 min in the Vis-CoOOH@COFs/PMS system,and the reaction rate constant was 0.456 min^(-1),which was nearly 1.90 and 2.85 times that of single Co OOH and COFs,and2.36 times that under dark condition,respectively.The density functional theory(DFT) calculations confirmed the energy band bending of CoOOH@COFs and S-scheme charge transport from COFs to Co OOH.Both experimental and theoretical analyses indicated that Co OOH@COFs in photocatalytic-PMS activation systems synergistically facilitated photo-generated carrier separation,enhanced interfacial electron transfer,accelerated PMS activation,and generated multiple ROSs.In particular,photogenerated electrons(e^(-))accelerated the Co(Ⅲ)/Co(Ⅱ) redox cycle,while the PMS captured the e-,which significantly decreased the charge combination of Co OOH@COFs.Radicals(O_(2)^(·-),^(·)OH,and SO_(4)^(·-)) and non-radicals(such as ^(1)O_(2),h^(+),and e^(-)) were both presented in the Vis-CoOOH@COFs/PMS system,with O_(2)^(-) playing a dominant role in TCS degradation.Furthermore,the pathway of TCS degradation and toxicity of intermediates were explored by DFT calculation and transformation product identification.Importantly,the environmentally friendly CoOOH@COFs S-scheme heterojunction exhibited excellent stability and reusability.In conclusion,this study innovatively designed an S-scheme heterojunction in the photocatalytic-PMS activation system,providing guidance and theoretical support for efficient and eco-friendly wastewater treatment.展开更多
In the past decade,the global industry and research attentions on intelligent skin-like electronics have boosted their applications in diverse fields including human healthcare,Internet of Things,human–machine interf...In the past decade,the global industry and research attentions on intelligent skin-like electronics have boosted their applications in diverse fields including human healthcare,Internet of Things,human–machine interfaces,artificial intelligence and soft robotics.Among them,flexible humidity sensors play a vital role in noncontact measurements relying on the unique property of rapid response to humidity change.This work presents an overview of recent advances in flexible humidity sensors using various active functional materials for contactless monitoring.Four categories of humidity sensors are highlighted based on resistive,capacitive,impedance-type and voltage-type working mechanisms.Furthermore,typical strategies including chemical doping,structural design and Joule heating are introduced to enhance the performance of humidity sensors.Drawing on the noncontact perception capability,human/plant healthcare management,human-machine interactions as well as integrated humidity sensor-based feedback systems are presented.The burgeoning innovations in this research field will benefit human society,especially during the COVID-19 epidemic,where cross-infection should be averted and contactless sensation is highly desired.展开更多
Current electronics are driven by advanced microfabrication for fast and efficient information processing.In spite of high performance,these wafer-based devices are rigid,non-degradable,and unable to autonomous repair...Current electronics are driven by advanced microfabrication for fast and efficient information processing.In spite of high performance,these wafer-based devices are rigid,non-degradable,and unable to autonomous repair.Skin-inspired electronics have emerged as a new class of devices and systems for next-generation flexible and wearable electronics.The technology gains inspiration from the structures,properties,and sensing mechanisms of the skin,which may find a broad range of applications in cutting-edge fields such as healthcare monitoring,human-machine interface,and soft robotics/prostheses.Practical demands have fueled the development of electronic materials with skin-like properties in terms of stretchability,self-healing capability,and biodegradability.These materials provide the basis for functional sensors with innovative and biomimetic designs.Further system-level integrations and optimizations enable new forms of electronics for real-world applications.This review summarizes recent advancements in this active area and speculates on future directions.展开更多
A bunch arrival-time monitor(BAM) system,based on electro-optical intensity modulation scheme, is under study at Shanghai Soft X-ray Free Electron Laser.The aim of the study is to achieve high-precision time measureme...A bunch arrival-time monitor(BAM) system,based on electro-optical intensity modulation scheme, is under study at Shanghai Soft X-ray Free Electron Laser.The aim of the study is to achieve high-precision time measurement for minimizing bunch fluctuations. A readout electronics is developed to fulfill the requirements of the BAM system. The readout electronics is mainly composed of a signal conditioning circuit, field-programmable gate array(FPGA), mezzanine card(FMC150), and powerful FPGA carrier board. The signal conditioning circuit converts the laser pulses into electrical pulse signals using a photodiode. Thereafter, it performs splitting and low-noise amplification to achieve the best voltage sampling performance of the dual-channel analog-to-digital converter(ADC) in FMC150. The FMC150 ADC daughter card includes a 14-bit 250 Msps dual-channel high-speed ADC,a clock configuration, and a management module. The powerful FPGA carrier board is a commercial high-performance Xilinx Kintex-7 FPGA evaluation board. To achieve clock and data alignment for ADC data capture at a high sampling rate, we used ISERDES, IDELAY, and dedicated carry-in resources in the Kintex-7 FPGA. This paper presents a detailed development of the readout electronics in the BAM system and its performance.展开更多
基金the Major Program of National Natural Science Foundation of China(51490683).
文摘Modeling and simulation have emerged as an indispensable approach to create numerical experiment platforms and study engineering systems.However,the increasingly complicated systems that engineers face today dramatically challenge state-of-the-art modeling and simulation approaches.Such complicated systems,which are composed of not only continuous states but also discrete events,and which contain complex dynamics across multiple timescales,are defined as generalized hybrid systems(GHSs)in this paper.As a representative GHS,megawatt power electronics(MPE)systems have been largely integrated into the modern power grid,but MPE simulation remains a bottleneck due to its unacceptable time cost and poor convergence.To address this challenge,this paper proposes the numerical convex lens approach to achieve state-discretized modeling and simulation of GHSs.This approach transforms conventional time-discretized passive simulations designed for pure-continuous systems into state-discretized selective simulations designed for GHSs.When this approach was applied to a largescale MPE-based renewable energy system,a 1000-fold increase in simulation speed was achieved,in comparison with existing software.Furthermore,the proposed approach uniquely enables the switching transient simulation of a largescale megawatt system with high accuracy,compared with experimental results,and with no convergence concerns.The numerical convex lens approach leads to the highly efficient simulation of intricate GHSs across multiple timescales,and thus significantly extends engineers’capability to study systems with numerical experiments.
基金supported by the National Natural Science Foundation of China (Nos.11875146,U1932143)National Key Research and Development Program of China (No.2020YFE0202002)。
文摘This study presents an electronics system for cosmic X-ray polarization detection(CXPD).The CXPD was designed as a high-sensitivity soft X-ray polarimeter with a measurement energy range of 2-10 keV carried by a CubeSat.A stable and functionally complete electronics system under power and space constraints is a key challenge.The complete CXPD electronics system(CXPDES)comprises hardware and firmware.CXPDES adopts a three-layer electronic board structure based on functionality and available space.Two gas pixel detectors(GPDs)were placed on the top layer board,and CXPDES provided the GPDs with voltages up to-4000 V.Each GPD signal was digitized,compressed,encoded,and stored before being transmitted to the ground.The CXPDES provided stable and high-speed communication based on a scheme that separated command and data transmission,and it supports the CXPDES in-orbit upgrade.In addition,environmental monitors,silicon photomultiplier(SiPM)triggers,power management,GPDs configuration,and mode switches were included in the overall operating logic of the CXPDES.The results obtained by testing the CXPDES showed that it satisfied all the requirements of CXPD.The CXPDES provides design experience and technological readiness for future large-area X-ray polarimetry missions.
文摘The rapid pace of change in the wide band gap(WBG)power semiconductor area has led to an explosion in potential uses for WBG devices in a huge variety of applications.The applications include automotive,aerospace and traction applications,as well as grid related or charging systems,with the potential to provide paradigm shifts in performance and efficiency over Silicon devices in current use today.Despite these exciting developments,however,there are still many outstanding challenges for both researchers and industry to solve before WBG technology becomes pervasive.In this paper we will explore some of these challenges and highlight the strengths of WBG devices,some of the specific issues for machine drives and develop some potential solutions for future developments in power electronics.
文摘Automated simulating of power electronics systems is currently performed by means of nodal analysis method combined with implicit numerical integration schemes. Such method allows to find transient solutions, even when the integrated system is stiff, however, it leads to some difficulties when simulating big systems and sometimes to the deterioration of computations quality, that is reflected in decrease in accuracy, oscillations of solutions, which are not present in the initial model. This paper analyzes the shortcomings of this approach, and proposes to apply explicit numerical schemes with stability control on the integration step and with reduction of some of state variables. A brief description of the method of finding transient solutions and an example of the analysis are also given in the present paper.
文摘Currently, the high-speed serial fiber-optic ring net communication is a main method for performing the distributed control network topology and control mode. Because of a network transmission delay inherent in the topology, synchronization between nodes has become a critical issue which needs to be studied. The existing synchronization methods largely depend on the complex communication protocol. Therefore, this paper has proposed a method of automatic measurement and compensation of synchronization delay, and analyzed its operating principle and implementation procedure in detail. The results obtained from the experiments prove the proposed method to be correct, effective and practicable.
文摘Magnetic mass spectrometer electronics system is mainly read out 420 channels charge signal of the Faraday cup array detector. Each channel contains two ranges, and each channel can be arbitrary controlled to switch range.An effective measuring range from 100 fC to 100 pC is required, and linearity error is less than 3.6%.
基金supported by the science and technology project of State Grid Shanghai Municipal Electric Power Company(No.52094023003L).
文摘New electric power systems characterized by a high proportion of renewable energy and power electronics equipment face significant challenges due to high-frequency(HF)electromagnetic interference from the high-speed switching of power converters.To address this situation,this paper offers an in-depth review of HF interference problems and challenges originating from power electronic devices.First,the root cause of HF electromagnetic interference,i.e.,the resonant response of the parasitic parameters of the system to high-speed switching transients,is analyzed,and various scenarios of HF interference in power systems are highlighted.Next,the types of HF interference are summarized,with a focus on common-mode interference in grounding systems.This paper thoroughly reviews and compares various suppression methods for conducted HF interference.Finally,the challenges involved and suggestions for addressing emerging HF interference problems from the perspective of both power electronics equipment and power systems are discussed.This review aims to offer a structured understanding of HF interference problems and their suppression techniques for researchers and practitioners.
基金supported in part by the National Key R&D Program of China under Grant 2024YFB4405300 and 2022YFA1204300the Natural Science Foundation of Hunan Province under Grant 2023JJ20016+2 种基金the National Natural Science Foundation of China under Grants of 52221001 and 62090035the Key Research and Development Plan of Hunan Province under grants of 2022GK3002 and 2023GK2012the Key Program of Science and Technology Department of Hunan Province under grant of 2020XK2001。
文摘Permeable electronics promise improved physiological comfort,but remain constrained by limited functional integration and poor mechanical robustness.Here,we report a three-dimensional(3D)permeable electronic system that overcomes these challenges by combining electrospun SEBS nanofiber mats,high-resolution liquid metal conductors patterned via thermal imprinting(50μm),and a strain isolators(SIL)that protects vertical interconnects(VIAs)from stress concentration.This architecture achieves ultrahigh air permeability(>5.09 m L cm^(-2)min^(-1)),exceptional stretchability(750%fracture strain),and reliable conductivity maintained through more than 32,500 strain cycles.Leveraging these advances,we have integrated multilayer circuits,strain sensors,and a three-axis accelerometer to achieve a fully integrated,stretchable,permeable wireless real-time gesture recognition glove.The system enables accurate sign language interpretation(98%)and seamless robotic hand control,demonstrating its potential for assistive technologies.By uniting comfort,durability,and high-density integration,this work establishes a versatile platform for nextgeneration wearable electronics and interactive human-robot interfaces.
基金supported by the Key R&D Program of Shandong Province(No.2023SFGC0101)Shandong Excellent Young Scientists Fund Program(Overseas)(No.2023HWYQ-047)+1 种基金the Natural Science Foundation of Shandong Province(No.ZR2022QA039)the National Natural Science Foundation of China(NSFC)(No.U2106202).
文摘Traditional digitizers for signal readout of PET detectors are based on commercial analog-to-digital converters(ADC).However,the cost and power consumption of an entire electronic readout system based on digitizers for a PET scanner are high.To address this problem,a soft-core ADC based on a field-programmable gate array(FPGA)was proposed.An FPGA-based ADC(FPGA-ADC)combines low loss and high performance.To achieve good performance,the FPGA-ADC requires three calibrations:time-to-digital converter(TDC)length calibration,TDC alignment calibration,and TDC-to-ADC calibration.A prototype front-end electronics based on FPGA-ADC was built to evaluate the performance of time-of-flight positron emission tomography(TOF PET)detectors.Each PET detector consists of a LYSO crystal single-ended coupled to a silicon photomultiplier(SiPM).The experimental results show that the full-width at half-maximum(FWHM)energy resolution for 511 keV gamma photons after saturation correction of the SiPM was 12.3%.The FWHM coincidence timing resolution(CTR)of the TOF PET detector with the readout of the front-end electronic prototype is 385.2 ps.FPGA-ADCbased front-end electronics are very promising for multichannel,low-cost,highly integrated,and power-efficient readout electronic systems for radiation detector applications.
基金supported by the National Natural Science Foundation of China(22074072,22274083,52376199)the Shandong Provincial Natural Science Foundation(ZR2023LZY005)+1 种基金the Exploration Project of the State Key Laboratory of BioFibers and EcoTextiles of Qingdao University(TSKT202101)the Fundamental Research Funds for the Central Universities(2022BLRD13,2023BLRD01).
文摘A rapidly growing field is piezoresistive sensor for accurate respiration rate monitoring to suppress the worldwide respiratory illness.However,a large neglected issue is the sensing durability and accuracy without interference since the expiratory pressure always coupled with external humidity and temperature variations,as well as mechanical motion artifacts.Herein,a robust and biodegradable piezoresistive sensor is reported that consists of heterogeneous MXene/cellulose-gelation sensing layer and Ag-based interdigital electrode,featuring customizable cylindrical interface arrangement and compact hierarchical laminated architecture for collectively regulating the piezoresistive response and mechanical robustness,thereby realizing the long-term breath-induced pressure detection.Notably,molecular dynamics simulations reveal the frequent angle inversion and reorientation of MXene/cellulose in vacuum filtration,driven by shear forces and interfacial interactions,which facilitate the establishment of hydrogen bonds and optimize the architecture design in sensing layer.The resultant sensor delivers unprecedented collection features of superior stability for off-axis deformation(0-120°,~2.8×10^(-3) A)and sensing accuracy without crosstalk(humidity 50%-100%and temperature 30-80).Besides,the sensor-embedded mask together with machine learning models is achieved to train and classify the respiration status for volunteers with different ages(average prediction accuracy~90%).It is envisioned that the customizable architecture design and sensor paradigm will shed light on the advanced stability of sustainable electronics and pave the way for the commercial application in respiratory monitory.
基金supported by the Shenzhen Scientific and Technological Foundation(RCYX20231211090332037 and JCYJ20240813160211015)the National Natural Science Foundation of China(62474008 and 62204007)+2 种基金the Guangdong Provincial Natural Science Foundation(2024A1515030044)the Guangdong Provincial Key Laboratory of In-Memory Computing Chips(2024B1212020002)the Shenzhen Science and Technology Program(KJZD20230923115005009)。
文摘Reed membrane,a natural cellulosic material traditionally used in musical instruments,holds promise in flexible electronics due to its abundance,low cost,and excellent biocompatibility.However,its native form contains water-soluble ions and lipid-soluble waxes that hinder performance in acoustic and electronics by compromising electrical insulation and mechanical stability.Here,supercritical fluid superposition purification(SCSP-WA)is introduced,which utilizes supercritical CO_(2)with water and acetone as bipolar co-solvents to selectively remove these impurities.Post-SCSP-WA treatment,the reed membrane exhibits significant enhancements in mechanical strength and electrical insulation,achieving a 4-fold increase in elongation at break,improved tensile strength and Young’s modulus,and a 98.5%reduction in leakage current,all while maintaining low and stable capacitance.These improvements stem from the restructuring of the fibrous network into a porous,interconnected microstructure.Material characterization(X-ray photoelectron spectroscopy(XPS),Fourier-transform infrared spectroscopy(FTIR),and scanning electron microscopy(SEM))confirmed the effective removal of magnesium and waxy functional groups,along with enhanced fiber crosslinking.Cytotoxicity tests further validated the biocompatibility of the SCSP-WA-treated membranes.This environmentally sustainable approach expands the potential of reed membranes in flexible bioelectronics and bio-integrated acoustic systems.
基金supported by the National Natural Science Foundation of China(22434007,22104021,52303075,22404102)the Taishan Young Scholar Program of Shandong Province(tsqnz20231235)+2 种基金the Natural Science Foundation of Shandong Province(ZR2024QB338,ZR2023QB227)the Higher Education Institutions Youth Innovation Team Plan of Shandong Province(2024KJH046)the Shandong Postdoctora1 Science Foundation(SDCX-ZG-202400279)。
文摘Air-permeable and ultrathin conductive electrodes are essential for next-generation soft electronics,including breathable wearables,on-skin devices and biointegrated electronics.However,conventional metallization strategies,such as sputtering and ink-printing,often suffer from severe vertical charge leakage due to the porous and ultrathin characteristics of nanofibrous networks,leading to device short-circuiting,operational failure and limited vertical integration.Here,we present a solvent-selective dissolutionassisted transfer printing strategy to achieve surface-confined metallization of ultrathin,lightweight,and gas-permeable nanofibrous networks,enabling lateral conductivity while maintaining vertical insulation.This transfer printing process facilitates not only the rapid formation of conductive patterns on the surface of nanofibrous networks but also mechanical reinforcement through solvent evaporation-induced interlocked fiber-fiber welding.Meanwhile,the strategy preserves the high permeability of the nanofibrous networks and imparts a unique combination of surface conductivity(2Ωcm)and vertical insulativity(10^(11)Ωcm).The resulting anisotropic conductive networks enable low-voltage wearable heaters,high-sensitive pressure sensors,and ultralight temperature sensors.A pressure-temperature dual-modal sensing patch is further fabricated for intelligent grasping classification.The proposed surface-confined metallization strategy enables rapid fabrication of an anisotropic conductive network as a building block to construct air-permeable,ultrathin and lightweight wearable electronics.
文摘As circuit feature sizes approach the nanoscale,traditional Copper(Cu)interconnects face significant hurdles posed by rising resistance-capacitance(RC)delay,electromigration,and high power dissipation.These limitations impose constraints on the scalability and reliability of future semiconductor technologies.Our paper describes the new Vertical multilayer Aluminium Boron Nitride Nanoribbon(AlBN)interconnect structure,integrated with Density functional theory(DFT)using first-principles calculations.This study explores AlBN-based nanostructures with doping of 1Cu,2Cu,1Fe(Iron),and 2Fe for the application of Very Large Scale Integration(VLSI)interconnects.The AlBN structure utilized the advantages of vertical multilayer interconnects to both reduce the RC delay while enhancing signal integrity.Key parameters like Fermi energy,bandgap,binding energy,conduction channels,quantum resistance,and RC delay were analyzed.Through modeling and large-scale simulation,the structural,electronic,and stability attributes of the AlBN interconnects are analyzed,and the results illustrate considerable improvements in signal propagation against Cu interconnect structures.These findings confirm the tunable,high-performance nature of AlBN-2Fe,making it a promising candidate for future high-speed,low-power VLSI interconnect technologies.We demonstrated an advanced energy-efficient interconnect that can be easily scaled for future nanoscale VLSI circuit design and gives rise to a next generation of viable interconnect technology for high-capacity,high-speed,reliable semiconductor technology.
基金supported by National Natural Science Foundation of China(Grant Nos.52025055,52375576,52350349)Key Research and Development Program of Shaanxi(Program No.2022GXLH-01-12)+2 种基金Joint Fund of Ministry of Education for Equipment Pre-research(No.8091B03012304)Aeronautical Science Foundation of China(No.2022004607001)the Fundamental Research Funds for the Central Universities(No.xtr072024031).
文摘Continuous monitoring of biosignals is essential for advancing early disease detection,personalized treatment,and health management.Flexible electronics,capable of accurately monitoring biosignals in daily life,have garnered considerable attention due to their softness,conformability,and biocompatibility.However,several challenges remain,including imperfect skin-device interfaces,limited breathability,and insufficient mechanoelectrical stability.On-skin epidermal electronics,distinguished by their excellent conformability,breathability,and mechanoelectrical robustness,offer a promising solution for high-fidelity,long-term health monitoring.These devices can seamlessly integrate with the human body,leading to transformative advancements in future personalized healthcare.This review provides a systematic examination of recent advancements in on-skin epidermal electronics,with particular emphasis on critical aspects including material science,structural design,desired properties,and practical applications.We explore various materials,considering their properties and the corresponding structural designs developed to construct high-performance epidermal electronics.We then discuss different approaches for achieving the desired device properties necessary for long-term health monitoring,including adhesiveness,breathability,and mechanoelectrical stability.Additionally,we summarize the diverse applications of these devices in monitoring biophysical and physiological signals.Finally,we address the challenges facing these devices and outline future prospects,offering insights into the ongoing development of on-skin epidermal electronics for long-term health monitoring.
基金supported by National Natural Science Foundation of China(No.52103044)Double First-Class Initiative University of Science and Technology of China(KY2400000037)the Young Talent Programme(GG2400007009).
文摘Conductive elastomers combining micromechanical sensitivity,lightweight adaptability,and environmental sustainability are critically needed for advanced flexible electronics requiring precise responsiveness and long-term wearability;however,the integration of these properties remains a significant challenge.Here,we present a biomass-derived conductive elastomer featuring a rationally engineered dynamic crosslinked network integrated with a tunable microporous architecture.This structural design imparts pronounced micromechanical sensitivity,an ultralow density(~0.25 g cm^(−3)),and superior mechanical compliance for adaptive deformation.Moreover,the unique micro-spring effect derived from the porous architecture ensures exceptional stretchability(>500%elongation at break)and superior resilience,delivering immediate and stable electrical response under both subtle(<1%)and large(>200%)mechanical stimuli.Intrinsic dynamic interactions endow the elastomer with efficient room temperature self-healing and complete recyclability without compromising performance.First-principles simulations clarify the mechanisms behind micropore formation and the resulting functionality.Beyond its facile and mild fabrication process,this work establishes a scalable route toward high-performance,sustainable conductive elastomers tailored for next-generation soft electronics.
文摘Triclosan(TCS) poses harmful risks to ecosystems and human health owing to its endocrine-disrupting effects.Therefore,developing an efficient and sustainable technology to degrade TCS is urgently needed.Herein,cobalt oxyhydroxide @covalent organic frameworks(CoOOH@COFs) S-scheme heterojunction was synthesized,which combined the visible-light-driven photocatalysis and peroxymonosulfate(PMS) activation to synergistically generate abundant reactive oxygen species(ROSs) for TCS degradation.The degradation efficiency of TCS reached 100 % within 8 min in the Vis-CoOOH@COFs/PMS system,and the reaction rate constant was 0.456 min^(-1),which was nearly 1.90 and 2.85 times that of single Co OOH and COFs,and2.36 times that under dark condition,respectively.The density functional theory(DFT) calculations confirmed the energy band bending of CoOOH@COFs and S-scheme charge transport from COFs to Co OOH.Both experimental and theoretical analyses indicated that Co OOH@COFs in photocatalytic-PMS activation systems synergistically facilitated photo-generated carrier separation,enhanced interfacial electron transfer,accelerated PMS activation,and generated multiple ROSs.In particular,photogenerated electrons(e^(-))accelerated the Co(Ⅲ)/Co(Ⅱ) redox cycle,while the PMS captured the e-,which significantly decreased the charge combination of Co OOH@COFs.Radicals(O_(2)^(·-),^(·)OH,and SO_(4)^(·-)) and non-radicals(such as ^(1)O_(2),h^(+),and e^(-)) were both presented in the Vis-CoOOH@COFs/PMS system,with O_(2)^(-) playing a dominant role in TCS degradation.Furthermore,the pathway of TCS degradation and toxicity of intermediates were explored by DFT calculation and transformation product identification.Importantly,the environmentally friendly CoOOH@COFs S-scheme heterojunction exhibited excellent stability and reusability.In conclusion,this study innovatively designed an S-scheme heterojunction in the photocatalytic-PMS activation system,providing guidance and theoretical support for efficient and eco-friendly wastewater treatment.
基金supported by the National Science and Technology Innovation 2030 Major Project(Grant No.2022ZD0208601)the National Natural Science Foundation of China(Grant No.52105593 and 51975513)the Natural Science Foundation of Zhejiang Province,China(No.LR20E050003)。
文摘In the past decade,the global industry and research attentions on intelligent skin-like electronics have boosted their applications in diverse fields including human healthcare,Internet of Things,human–machine interfaces,artificial intelligence and soft robotics.Among them,flexible humidity sensors play a vital role in noncontact measurements relying on the unique property of rapid response to humidity change.This work presents an overview of recent advances in flexible humidity sensors using various active functional materials for contactless monitoring.Four categories of humidity sensors are highlighted based on resistive,capacitive,impedance-type and voltage-type working mechanisms.Furthermore,typical strategies including chemical doping,structural design and Joule heating are introduced to enhance the performance of humidity sensors.Drawing on the noncontact perception capability,human/plant healthcare management,human-machine interactions as well as integrated humidity sensor-based feedback systems are presented.The burgeoning innovations in this research field will benefit human society,especially during the COVID-19 epidemic,where cross-infection should be averted and contactless sensation is highly desired.
基金the National Natural Science Foundation of China under Grants 61825403,61674078,and 61921005the National Key Research and Development program of China under Grant 2017YFA0206302, the PAPD program.
文摘Current electronics are driven by advanced microfabrication for fast and efficient information processing.In spite of high performance,these wafer-based devices are rigid,non-degradable,and unable to autonomous repair.Skin-inspired electronics have emerged as a new class of devices and systems for next-generation flexible and wearable electronics.The technology gains inspiration from the structures,properties,and sensing mechanisms of the skin,which may find a broad range of applications in cutting-edge fields such as healthcare monitoring,human-machine interface,and soft robotics/prostheses.Practical demands have fueled the development of electronic materials with skin-like properties in terms of stretchability,self-healing capability,and biodegradability.These materials provide the basis for functional sensors with innovative and biomimetic designs.Further system-level integrations and optimizations enable new forms of electronics for real-world applications.This review summarizes recent advancements in this active area and speculates on future directions.
基金supported by the National Key R&D Plan(No.2016YFA0401900)
文摘A bunch arrival-time monitor(BAM) system,based on electro-optical intensity modulation scheme, is under study at Shanghai Soft X-ray Free Electron Laser.The aim of the study is to achieve high-precision time measurement for minimizing bunch fluctuations. A readout electronics is developed to fulfill the requirements of the BAM system. The readout electronics is mainly composed of a signal conditioning circuit, field-programmable gate array(FPGA), mezzanine card(FMC150), and powerful FPGA carrier board. The signal conditioning circuit converts the laser pulses into electrical pulse signals using a photodiode. Thereafter, it performs splitting and low-noise amplification to achieve the best voltage sampling performance of the dual-channel analog-to-digital converter(ADC) in FMC150. The FMC150 ADC daughter card includes a 14-bit 250 Msps dual-channel high-speed ADC,a clock configuration, and a management module. The powerful FPGA carrier board is a commercial high-performance Xilinx Kintex-7 FPGA evaluation board. To achieve clock and data alignment for ADC data capture at a high sampling rate, we used ISERDES, IDELAY, and dedicated carry-in resources in the Kintex-7 FPGA. This paper presents a detailed development of the readout electronics in the BAM system and its performance.
