With the rapid development of portable electronics,new energy vehicles,and smart grids,ion batteries are becoming one of the most widely used energy storage devices,while the safety concern of ion batteries has always...With the rapid development of portable electronics,new energy vehicles,and smart grids,ion batteries are becoming one of the most widely used energy storage devices,while the safety concern of ion batteries has always been an urgent problem to be solved.To develop a safety-guaranteed battery,the characterization of the internal structure is indispensable,where electron microscopy plays a crucial role.Based on this,this paper summarizes the application of transmission electron microscopy(TEM)in battery safety,further concludes and analyzes the aspects of dendrite growth and solid electrolyte interface(SEI)formation that affect the safety of ion batteries,and emphasizes the importance of electron microscopy in battery safety research and the potential of these techniques to promote the future development of this field.These advanced electron microscopy techniques and their prospects are also discussed.展开更多
A series of lanthanide complexes LnCl_3·L(Ln=La,Pr,Nd;L=15-C-5 or 18-C-6)have been synthesized and their molecular configuration,electronic structure and bond character have been studied by XPS and quantum chemic...A series of lanthanide complexes LnCl_3·L(Ln=La,Pr,Nd;L=15-C-5 or 18-C-6)have been synthesized and their molecular configuration,electronic structure and bond character have been studied by XPS and quantum chemical calculation.The calculated results are in good agreement with that obtained in the experiments.Three Cl atoms are on the same side of Ln in LnCl_3·15-C-5 and the crown ring on the other side.forming a complex molecule with coordination number 8.LnCl_3·15-C-5 is easily hygroscopic in air because of its unsaturated coordination,which differs sharply from the stable Ln(NO_3)_3·15-C-5 com- plex of coordination number 11.The HOMO and neighboring occupied MOs are composed of Cl 3p and O2p, and the LUMO and neighboring unoccupied MOs are composed of Ln orbitals.The level structure easily pro- duces Ln3d satellite in XPS caused by L→Ln charge transfer transition.Due to the coordination,the absolute values of the charge are decreased at Ln and O atoms,but increased at Cl atoms,which is in agreement with XPS results.展开更多
A single electron transistor based on a silicon-on-insulator is successfully fabricated with electron-beam nano- lithography, inductively coupled plasma etching, thermal oxidation and other techniques. The unique desi...A single electron transistor based on a silicon-on-insulator is successfully fabricated with electron-beam nano- lithography, inductively coupled plasma etching, thermal oxidation and other techniques. The unique design of the pattern inversion is used, and the pattern is transferred to be negative in the electron-beam lithography step. The oxidation process is used to form the silicon oxide tunneling barriers, and to further reduce the effective size of the quantum dot. Combinations of these methods offer advantages of good size controllability and accuracy, high reproducibility, low cost, large-area contacts, allowing batch fabrication of single electron transistors and good integration with a radio-frequency tank circuit. The fabricated single electron transistor with a quantum dot about 50nto in diameter is demonstrated to operate at temperatures up to 70K. The charging energy of the Coulomb island is about 12.5meV.展开更多
Greener synthesis of nanoparticle is a revolutionizing area in research field.Biological method of reduction of metal ions is often preferred because they are clean,safe,biocompatible,and environmentally acceptable th...Greener synthesis of nanoparticle is a revolutionizing area in research field.Biological method of reduction of metal ions is often preferred because they are clean,safe,biocompatible,and environmentally acceptable than physical,chemical,and mechanical methods.The wet biomass of Aspergillus terreus（A.terreus） was utilized for the intracellular synthesis of gold nanoparticles.Gold nanoparticles were produced when an aqueous solution of chloroauric acid was reduced by A.terreus biomass as the reducing agent.Production of gold nanoparticles was confirmed by the color change of biomass from yellow to pinkish violet.The produced nanoparticles were then characterized by FT-IR,SEM,EDS,and XRD.The SEM images revealed that the nanoparticles were spherical,irregularly shaped with no definite morphology.Average size of the biosynthesized gold nanoparticles was 186 nm.The presence of the gold nanoparticle was confirmed by EDS analysis.Crystalline nature of synthesized gold nanoparticle was confirmed by XRD pattern.展开更多
Precipitation at grain boundaries is typically not regarded as an efficient method for strengthening materials since it can induce grain boundary embrittlement, which detrimentally affects ductility. In this research,...Precipitation at grain boundaries is typically not regarded as an efficient method for strengthening materials since it can induce grain boundary embrittlement, which detrimentally affects ductility. In this research, we developed a multi-principal element alloy (MPEA) with the composition Cr_(30)Co_(30)Ni_(30)Al_(5)Ti_(5) (at.%), incorporating both intragranular and intergranular nanoprecipitates. Utilizing multiscale, three-dimensional, and in-situ electron microscopy techniques, coupled with computational simulations, we established that intergranular nanoprecipitation in this material plays a crucial role in enhancing strength and promoting dislocation plasticity. The structure of intergranular nanoprecipitation comprises multiple phases with varying composition and structure. Despite the diversity, the crystal planes conducive to the easy glide of dislocations are well-matched, allowing for the sustained continuity of dislocation slipping across different phase structures. Simultaneously, this structure generates an undulated stress field near grain boundaries, amplifying the strengthening effect and facilitating multiple slip and cross-slip during deformation. Consequently, it promotes the proliferation and storage of dislocations. As a result, our material exhibits a yield strength of approximately 1010 MPa and an ultimate tensile strength of around 1500 MPa, accompanied by a significant fracture elongation of 41 %. Our findings illuminate the potential for harnessing intergranular nanoprecipitation to optimize the strength-ductility trade-off in MPEAs, emphasizing the strategy of leveraging complex compositions for the design of sophisticated functional microstructures.展开更多
The commercialization of proton exchange membrane fuel cells(PEMFCs)could provide a cleaner energy society in the near future.However,the sluggish reaction kinetics and harsh conditions of the oxygen reduction reactio...The commercialization of proton exchange membrane fuel cells(PEMFCs)could provide a cleaner energy society in the near future.However,the sluggish reaction kinetics and harsh conditions of the oxygen reduction reaction affect the durability and cost of PEMFCs.Most previous reports on Pt-based electrocatalyst designs have focused more on improving their activity;however,with the commercialization of PEMFCs,durability has received increasing attention.In-depth insight into the structural evolution of Pt-based electrocatalysts throughout their lifecycle can contribute to further optimization of their activity and durability.The development of in situ electron microscopy and other in situ techniques has promoted the elucidation of the evolution mechanism.This mini review highlights recent advances in the structural evolution of Pt-based electrocatalysts.The mechanisms are adequately discussed,and some methods to inhibit or exploit the structural evolution of the catalysts are also briefly reviewed.展开更多
Hard secondary phases usually strengthen alloys at the expense of ductility.In this work,we made a dual-phase CrCoNi-O alloy containing a face centered cubic matrix and chromium oxide.On one side,the dispersed chromiu...Hard secondary phases usually strengthen alloys at the expense of ductility.In this work,we made a dual-phase CrCoNi-O alloy containing a face centered cubic matrix and chromium oxide.On one side,the dispersed chromium oxide nano-particles impeded dislocation movement and increased the strength of the alloy.On another side,the spreading lattice distortion in CrCoNi-O high entropy solution locally relieved the severe interfacial mismatch and led to nanoscale variation of interfacial strain at the matrix-oxide interface,which facilitated dislocations’transmission from one phase to another.Consequently,unlike the strong but brittle oxide nanoparticles used before,the oxide phase here can afford significant dislocation activities during material’s plastic deformation.Comparing the mechanical properties of CrCoNi-O alloys with and without chromium oxide particles,it was found that the yield strength of the dual-phase samples was twice of the single phase CrCoNi-O alloy and strong strain hardening was obtained with ultra-high deformation stability.High density of nanotwins formed in dual-phase samples under high stress,resulting in significant strain hardening according to the well-known twinning-induced plasticity(TWIP)effect.Our results shed light on optimizing the combination of strength and plasticity of compounds by modulating the variation of interfacial strain field based on the spreading lattice distortion.展开更多
TiO 2 nanowires were synthesized successfully in a large quantity by thermal evaporation using titanium monoxide powder as precursor. X-ray diffraction results showed that all the products were pure rutile phase of Ti...TiO 2 nanowires were synthesized successfully in a large quantity by thermal evaporation using titanium monoxide powder as precursor. X-ray diffraction results showed that all the products were pure rutile phase of TiO 2 . According to microstructural observations, the nanowires have two typical morphologies, a long straight type and a short tortuous type. The straight nanowires were obtained at a wide temperature range of 900–1050 ℃, while the tortuous ones were formed below 900 ℃. Transmission electron microscopy characterization revealed that both the straight and the tortuous nanowires are single-crystal rutile TiO 2 . The preferential growth direction of the nanowires was determined as [110] orientation according to electron diffraction and high-resolution image analyses. The morphological change of TiO 2 nanowires was discussed by considering the different atomic diffusion rates of Ti atoms caused by the phase transformation in Ti substrate at around 900 ℃.展开更多
To improve the electrochemical performances of α-MnO2 as electrode materials for supercapacitors, Sn-doped α-MnO2 in the presence of the doping amount of 1%-4% was successfully synthesized by hydrothermal method. As...To improve the electrochemical performances of α-MnO2 as electrode materials for supercapacitors, Sn-doped α-MnO2 in the presence of the doping amount of 1%-4% was successfully synthesized by hydrothermal method. As-prepared α-MnO2 presents nanorod shape and no other impurities exist. By ultraviolet-visible absorption spectroscopy, it is convinced that the band gaps of α-MnO2 decrease with increasing Sn-doping amount. Cyclic voltammetry investigation indicates that undoped and doped α-MnO2 all have regular capacitive response. As the scan rate enlarged, the profiles of curves gradually deviate from rectangle. Compared with undoped α-MnO2, doped α-MnO2 has larger specific capacitance. The specific capacitance of 3% doped α-MnO2 reaches 241.0 F/g while undoped α-MnO2 only has 173.0 F/g under 50 m A/g current density in galvanostatical charge-discharge measurement. Enhanced conductivity by Sn-doping is considered to account for doped sample＇s enhanced electrochemical specific capacitance.展开更多
Ti–Al surface alloy was fabricated using a cyclic pulsed liquid-phase mixing of predeposited 100 nm Al film with a-Ti substrate by low-energy high-current electron beam. Electron probe micro-analysis（EPMA）,grazing ...Ti–Al surface alloy was fabricated using a cyclic pulsed liquid-phase mixing of predeposited 100 nm Al film with a-Ti substrate by low-energy high-current electron beam. Electron probe micro-analysis（EPMA）,grazing incidence X-ray diffraction analysis（GIXRD）,transmission electron microscopy（TEM）, and nanoindentation were used to investigate the characterization of Ti–Al surface alloy. The experimental results show that the thickness of alloy layer is ＊3 lm, and the content of Al in the ＊1 lm thickness surface layer is ＊60 at%. The tetragonal TiAl and TiAl2intermetallics were synthesized at the top surface, which have nanocrystalline structure.The main phase formed in the ＊2.5 lm thick surface is TiAl, and there are few TiAl2and Ti3Al phase for the alloy.Dislocation is enhanced in the alloyed layer. The nanohardness of Ti–Al surface alloy increased significantly compared with a-Ti substrate due to the nanostructure and enhanced dislocation. Since the e-beam remelted repeatedly, the Ti–Al surface alloy mixed sufficiently with Ti substrate. Moreover, there is no obvious boundary between the alloyed layer and substrate.展开更多
Beam quality degradation during the transition from a laser wakefield accelerator to the vacuum is one of the reasons that cause the beam transport distortion, which hinders the way to compact free-electron-lasers. He...Beam quality degradation during the transition from a laser wakefield accelerator to the vacuum is one of the reasons that cause the beam transport distortion, which hinders the way to compact free-electron-lasers. Here,we performed transition simulation to initialize the beam parameters for beam optics transport. This initialization was crucial in matching the experimental results and the designed evolution of the beamline. We experimentally characterized properties of high-quality laser-wakefield-accelerated electron beams, such as transverse beam profile, divergence, and directionality after long-distance transport. By installing magnetic quadrupole lenses with tailored strength gradients, we successfully collimated the electron beams with tunable energies from 200 to 600 MeV.展开更多
Carbon-supported Pt/C,Pt/Re/C,Pt/SnO2/C and Pt/Re/SnO2/C,with 20 wt.%overall metal loading were prepared and their electrochemical activity towards ethanol oxidation reaction(EOR)was investigated.Transmission electron...Carbon-supported Pt/C,Pt/Re/C,Pt/SnO2/C and Pt/Re/SnO2/C,with 20 wt.%overall metal loading were prepared and their electrochemical activity towards ethanol oxidation reaction(EOR)was investigated.Transmission electron microscopy(TEM)combined with energy dispersive X-ray spectroscopy(EDS)revealed,that indeed binary and ternary combinations of the designed nanoparticles(NPs)were formed and successfully uniformly deposited on a carbon support.Fourier transform infrared spectroscopy(FTIR)allowed to assess the chemical composition of the nanocatalysts and X-ray diffraction(XRD)allowed to determine the catalyst structure.Potentiodynamic and chronoamperometric measurements were used to establish its catalytic activity and stability.The influence of Re addition on the electrochemical activity towards ethanol oxidation reaction(EOR)was verified.Indeed,the addition of Re to the binary Pt/SnO2/C catalyst leads to the formation of ternary Pt/Re/SnO2/C with physical contact between the individual NPs,enhancing the EOR.Furthermore,the onset potential of the synthesized ternary catalyst is shifted to more negative potentials and the current densities and specific activity are nearly 11 and 5 times higher,respectively,than for commercial Pt catalyst.Additionally ternary Pt/Re/SnO2/C catalyst retained 96%of its electrochemical surface area.展开更多
基金supported by the National Natural Science Foundation of China(No.22209027)the Shenzhen Science and Technology Program(No.JCYJ20220530142806015 and No.JCYJ20220818101008018)+1 种基金the Shenzhen“Pengcheng Peacock Program’the Tsinghua SIGS Cross-disciplinary Research and Innovation Fund(No.JC2022002)。
文摘With the rapid development of portable electronics,new energy vehicles,and smart grids,ion batteries are becoming one of the most widely used energy storage devices,while the safety concern of ion batteries has always been an urgent problem to be solved.To develop a safety-guaranteed battery,the characterization of the internal structure is indispensable,where electron microscopy plays a crucial role.Based on this,this paper summarizes the application of transmission electron microscopy(TEM)in battery safety,further concludes and analyzes the aspects of dendrite growth and solid electrolyte interface(SEI)formation that affect the safety of ion batteries,and emphasizes the importance of electron microscopy in battery safety research and the potential of these techniques to promote the future development of this field.These advanced electron microscopy techniques and their prospects are also discussed.
文摘A series of lanthanide complexes LnCl_3·L(Ln=La,Pr,Nd;L=15-C-5 or 18-C-6)have been synthesized and their molecular configuration,electronic structure and bond character have been studied by XPS and quantum chemical calculation.The calculated results are in good agreement with that obtained in the experiments.Three Cl atoms are on the same side of Ln in LnCl_3·15-C-5 and the crown ring on the other side.forming a complex molecule with coordination number 8.LnCl_3·15-C-5 is easily hygroscopic in air because of its unsaturated coordination,which differs sharply from the stable Ln(NO_3)_3·15-C-5 com- plex of coordination number 11.The HOMO and neighboring occupied MOs are composed of Cl 3p and O2p, and the LUMO and neighboring unoccupied MOs are composed of Ln orbitals.The level structure easily pro- duces Ln3d satellite in XPS caused by L→Ln charge transfer transition.Due to the coordination,the absolute values of the charge are decreased at Ln and O atoms,but increased at Cl atoms,which is in agreement with XPS results.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11074280 and 11403084the Instrument Developing Project of Chinese Academy of Sciences under Grant No YZ201152+2 种基金the Fundamental Research Funds for Central Universities under Grant Nos JUSRP51323B and JUDCF12032the Joint Innovation Project of Jiangsu Province under Grant No BY2013015-19the Graduate Student Innovation Program for Universities of Jiangsu Province under Grant No CXLX12_0724
文摘A single electron transistor based on a silicon-on-insulator is successfully fabricated with electron-beam nano- lithography, inductively coupled plasma etching, thermal oxidation and other techniques. The unique design of the pattern inversion is used, and the pattern is transferred to be negative in the electron-beam lithography step. The oxidation process is used to form the silicon oxide tunneling barriers, and to further reduce the effective size of the quantum dot. Combinations of these methods offer advantages of good size controllability and accuracy, high reproducibility, low cost, large-area contacts, allowing batch fabrication of single electron transistors and good integration with a radio-frequency tank circuit. The fabricated single electron transistor with a quantum dot about 50nto in diameter is demonstrated to operate at temperatures up to 70K. The charging energy of the Coulomb island is about 12.5meV.
文摘Greener synthesis of nanoparticle is a revolutionizing area in research field.Biological method of reduction of metal ions is often preferred because they are clean,safe,biocompatible,and environmentally acceptable than physical,chemical,and mechanical methods.The wet biomass of Aspergillus terreus（A.terreus） was utilized for the intracellular synthesis of gold nanoparticles.Gold nanoparticles were produced when an aqueous solution of chloroauric acid was reduced by A.terreus biomass as the reducing agent.Production of gold nanoparticles was confirmed by the color change of biomass from yellow to pinkish violet.The produced nanoparticles were then characterized by FT-IR,SEM,EDS,and XRD.The SEM images revealed that the nanoparticles were spherical,irregularly shaped with no definite morphology.Average size of the biosynthesized gold nanoparticles was 186 nm.The presence of the gold nanoparticle was confirmed by EDS analysis.Crystalline nature of synthesized gold nanoparticle was confirmed by XRD pattern.
基金supported by the National Science Fund for Distinguished Young Scholars of China(No.52325102)the Natural Science Foundation of Zhejiang Province,China(No.LZ22E010001)the National Key R&D Program of China(No.2023YFB2405802).
文摘Precipitation at grain boundaries is typically not regarded as an efficient method for strengthening materials since it can induce grain boundary embrittlement, which detrimentally affects ductility. In this research, we developed a multi-principal element alloy (MPEA) with the composition Cr_(30)Co_(30)Ni_(30)Al_(5)Ti_(5) (at.%), incorporating both intragranular and intergranular nanoprecipitates. Utilizing multiscale, three-dimensional, and in-situ electron microscopy techniques, coupled with computational simulations, we established that intergranular nanoprecipitation in this material plays a crucial role in enhancing strength and promoting dislocation plasticity. The structure of intergranular nanoprecipitation comprises multiple phases with varying composition and structure. Despite the diversity, the crystal planes conducive to the easy glide of dislocations are well-matched, allowing for the sustained continuity of dislocation slipping across different phase structures. Simultaneously, this structure generates an undulated stress field near grain boundaries, amplifying the strengthening effect and facilitating multiple slip and cross-slip during deformation. Consequently, it promotes the proliferation and storage of dislocations. As a result, our material exhibits a yield strength of approximately 1010 MPa and an ultimate tensile strength of around 1500 MPa, accompanied by a significant fracture elongation of 41 %. Our findings illuminate the potential for harnessing intergranular nanoprecipitation to optimize the strength-ductility trade-off in MPEAs, emphasizing the strategy of leveraging complex compositions for the design of sophisticated functional microstructures.
文摘The commercialization of proton exchange membrane fuel cells(PEMFCs)could provide a cleaner energy society in the near future.However,the sluggish reaction kinetics and harsh conditions of the oxygen reduction reaction affect the durability and cost of PEMFCs.Most previous reports on Pt-based electrocatalyst designs have focused more on improving their activity;however,with the commercialization of PEMFCs,durability has received increasing attention.In-depth insight into the structural evolution of Pt-based electrocatalysts throughout their lifecycle can contribute to further optimization of their activity and durability.The development of in situ electron microscopy and other in situ techniques has promoted the elucidation of the evolution mechanism.This mini review highlights recent advances in the structural evolution of Pt-based electrocatalysts.The mechanisms are adequately discussed,and some methods to inhibit or exploit the structural evolution of the catalysts are also briefly reviewed.
基金supported by the National Natural Science Foundation of China(Nos.51671168,51871197)National Key Research and Development Program of China(No.2017YFA0208200)National 111 Project(No.B16042).
文摘Hard secondary phases usually strengthen alloys at the expense of ductility.In this work,we made a dual-phase CrCoNi-O alloy containing a face centered cubic matrix and chromium oxide.On one side,the dispersed chromium oxide nano-particles impeded dislocation movement and increased the strength of the alloy.On another side,the spreading lattice distortion in CrCoNi-O high entropy solution locally relieved the severe interfacial mismatch and led to nanoscale variation of interfacial strain at the matrix-oxide interface,which facilitated dislocations’transmission from one phase to another.Consequently,unlike the strong but brittle oxide nanoparticles used before,the oxide phase here can afford significant dislocation activities during material’s plastic deformation.Comparing the mechanical properties of CrCoNi-O alloys with and without chromium oxide particles,it was found that the yield strength of the dual-phase samples was twice of the single phase CrCoNi-O alloy and strong strain hardening was obtained with ultra-high deformation stability.High density of nanotwins formed in dual-phase samples under high stress,resulting in significant strain hardening according to the well-known twinning-induced plasticity(TWIP)effect.Our results shed light on optimizing the combination of strength and plasticity of compounds by modulating the variation of interfacial strain field based on the spreading lattice distortion.
基金supported by the Hundred Talents Program of the Chinese Academy of Sciences,Shenyang Science and Technology Project (Grant No.F11-264-1-65)the National Basic Research Program of China (Grant No. 2010CB631006)the Major National Science and Technology Program of China (GrantNo. 2011ZX02602)
文摘TiO 2 nanowires were synthesized successfully in a large quantity by thermal evaporation using titanium monoxide powder as precursor. X-ray diffraction results showed that all the products were pure rutile phase of TiO 2 . According to microstructural observations, the nanowires have two typical morphologies, a long straight type and a short tortuous type. The straight nanowires were obtained at a wide temperature range of 900–1050 ℃, while the tortuous ones were formed below 900 ℃. Transmission electron microscopy characterization revealed that both the straight and the tortuous nanowires are single-crystal rutile TiO 2 . The preferential growth direction of the nanowires was determined as [110] orientation according to electron diffraction and high-resolution image analyses. The morphological change of TiO 2 nanowires was discussed by considering the different atomic diffusion rates of Ti atoms caused by the phase transformation in Ti substrate at around 900 ℃.
基金Funded by The National Natural Science Foundation of China(51402185)the Natural Science Foundation of Shanghai(13ZR1454700)
文摘To improve the electrochemical performances of α-MnO2 as electrode materials for supercapacitors, Sn-doped α-MnO2 in the presence of the doping amount of 1%-4% was successfully synthesized by hydrothermal method. As-prepared α-MnO2 presents nanorod shape and no other impurities exist. By ultraviolet-visible absorption spectroscopy, it is convinced that the band gaps of α-MnO2 decrease with increasing Sn-doping amount. Cyclic voltammetry investigation indicates that undoped and doped α-MnO2 all have regular capacitive response. As the scan rate enlarged, the profiles of curves gradually deviate from rectangle. Compared with undoped α-MnO2, doped α-MnO2 has larger specific capacitance. The specific capacitance of 3% doped α-MnO2 reaches 241.0 F/g while undoped α-MnO2 only has 173.0 F/g under 50 m A/g current density in galvanostatical charge-discharge measurement. Enhanced conductivity by Sn-doping is considered to account for doped sample＇s enhanced electrochemical specific capacitance.
基金financially supported by the National Natural Science Foundation of China and the Russian Foundation for Basic Research (No. 11011120081)Large Scientific Facilities of the National Natural Science Foundation of China and of the Chinese Academy of Sciences (No. 11079012)the National Natural Science Foundation of China (No. 10875021)
文摘Ti–Al surface alloy was fabricated using a cyclic pulsed liquid-phase mixing of predeposited 100 nm Al film with a-Ti substrate by low-energy high-current electron beam. Electron probe micro-analysis（EPMA）,grazing incidence X-ray diffraction analysis（GIXRD）,transmission electron microscopy（TEM）, and nanoindentation were used to investigate the characterization of Ti–Al surface alloy. The experimental results show that the thickness of alloy layer is ＊3 lm, and the content of Al in the ＊1 lm thickness surface layer is ＊60 at%. The tetragonal TiAl and TiAl2intermetallics were synthesized at the top surface, which have nanocrystalline structure.The main phase formed in the ＊2.5 lm thick surface is TiAl, and there are few TiAl2and Ti3Al phase for the alloy.Dislocation is enhanced in the alloyed layer. The nanohardness of Ti–Al surface alloy increased significantly compared with a-Ti substrate due to the nanostructure and enhanced dislocation. Since the e-beam remelted repeatedly, the Ti–Al surface alloy mixed sufficiently with Ti substrate. Moreover, there is no obvious boundary between the alloyed layer and substrate.
基金supported by the National Natural Science Foundation of China(Nos.11127901,11425418,61521093,11304271,11205228,and 11505263)the Strategic Priority Research Program(B)(No.XDB16)+1 种基金the Youth Innovation Promotion Association CASthe State Key Laboratory Program of the Chinese Ministry of Science and Technology
文摘Beam quality degradation during the transition from a laser wakefield accelerator to the vacuum is one of the reasons that cause the beam transport distortion, which hinders the way to compact free-electron-lasers. Here,we performed transition simulation to initialize the beam parameters for beam optics transport. This initialization was crucial in matching the experimental results and the designed evolution of the beamline. We experimentally characterized properties of high-quality laser-wakefield-accelerated electron beams, such as transverse beam profile, divergence, and directionality after long-distance transport. By installing magnetic quadrupole lenses with tailored strength gradients, we successfully collimated the electron beams with tunable energies from 200 to 600 MeV.
文摘Carbon-supported Pt/C,Pt/Re/C,Pt/SnO2/C and Pt/Re/SnO2/C,with 20 wt.%overall metal loading were prepared and their electrochemical activity towards ethanol oxidation reaction(EOR)was investigated.Transmission electron microscopy(TEM)combined with energy dispersive X-ray spectroscopy(EDS)revealed,that indeed binary and ternary combinations of the designed nanoparticles(NPs)were formed and successfully uniformly deposited on a carbon support.Fourier transform infrared spectroscopy(FTIR)allowed to assess the chemical composition of the nanocatalysts and X-ray diffraction(XRD)allowed to determine the catalyst structure.Potentiodynamic and chronoamperometric measurements were used to establish its catalytic activity and stability.The influence of Re addition on the electrochemical activity towards ethanol oxidation reaction(EOR)was verified.Indeed,the addition of Re to the binary Pt/SnO2/C catalyst leads to the formation of ternary Pt/Re/SnO2/C with physical contact between the individual NPs,enhancing the EOR.Furthermore,the onset potential of the synthesized ternary catalyst is shifted to more negative potentials and the current densities and specific activity are nearly 11 and 5 times higher,respectively,than for commercial Pt catalyst.Additionally ternary Pt/Re/SnO2/C catalyst retained 96%of its electrochemical surface area.
