Fully implanted brain-computer interfaces(BCIs)are preferred as they eliminate signal degradation caused by interference and absorption in external tissues,a common issue in non-fully implanted systems.To optimize the...Fully implanted brain-computer interfaces(BCIs)are preferred as they eliminate signal degradation caused by interference and absorption in external tissues,a common issue in non-fully implanted systems.To optimize the design of electroencephalography electrodes in fully implanted BCI systems,this study investigates the penetration and absorption characteristics of microwave signals in human brain tissue at different frequencies.Electromagnetic simulations are used to analyze the power density distribution and specific absorption rate(SAR)of signals at various frequen-cies.The results indicate that lower-frequency signals offer advantages in terms of power density and attenuation coeffi-cients.However,SAR-normalized analysis,which considers both power density and electromagnetic radiation hazards,shows that higher-frequency signals perform better at superficial to intermediate depths.Specifically,at a depth of 2 mm beneath the cortex,the power density of a 6.5 GHz signal is 247.83%higher than that of a 0.4 GHz signal.At a depth of 5 mm,the power density of a 3.5 GHz signal exceeds that of a 0.4 GHz signal by 224.16%.The findings suggest that 6.5 GHz is optimal for electrodes at a depth of 2 mm,3.5 GHz for 5 mm,2.45 GHz for depths of 15-20 mm,and 1.8 GHz for 25 mm.展开更多
Optimizing electrolytes is non-trivial and yet promising strategies to simultaneously address dendrite growth and parasitic reactions for aqueous zinc-ion batteries.Herein,we present a low-cost zwitterionic additive,1...Optimizing electrolytes is non-trivial and yet promising strategies to simultaneously address dendrite growth and parasitic reactions for aqueous zinc-ion batteries.Herein,we present a low-cost zwitterionic additive,1-butylsulfonic-3-methylimidazolium(BSM),to enhance conventional ZnSO_(4)electrolytes.Combining experimental characterization and theoretical calculations,the results reveal that the zincophilic sulfonate groups in BSM partially substitute coordinated H_(2)O molecules in the Zn^(2+)hydration shell,thereby optimizing solvation dynamics.Meanwhile,the imidazole groups are preferentially adsorbed onto the zinc anode surface,forming an adaptive layer that guides uniform Zn^(2+)deposition along the(002)crystal orientation,suppresses parasitic reaction,and mitigates dendrite growth.Consequently,the Zn||Zn symmetric cells with BSM electrolyte achieve an exceptional plating/stripping lifespan of 4000 h at 1 mA cm^(-2)(1 mA h cm^(-2))and over 1600 h under elevated current density(5 mA cm^(-2),5 mA h cm^(-2)).Moreover,the Zn||Cu asymmetric cell demonstrates a long cycle life exceeding 1100 cycles while it maintains an average Coulombic efficiency(CE)of above 99.5%.Impressively,the assembled Zn||NH_(4)V_(4)O_(10)(NVO)full cell with BSM modified ZnSO_(4)electrolyte retains 77.6%capacity retention after 1000 cycles at 5 A g^(-1).Thus,this work establishes a dual-regulatory mechanism through zwitterionic additives to enable dendrite-free anodes and ultra-stable aqueous metal batteries.展开更多
Electron transfer processes at polymer electrolyte/electrode interfaces play a central role in modern electrochemical devices of energy conversion,however,current understanding of electron transfers through electroche...Electron transfer processes at polymer electrolyte/electrode interfaces play a central role in modern electrochemical devices of energy conversion,however,current understanding of electron transfers through electrochemical interfaces was established exclusively based on the studies of liquid/solid electrochemical interfaces.Thus,similarities and differences of liquid and polymer electrolyte/electrode interfaces need to be mapped out to guide the design of device level electrochemical interfaces.In this work,we employ the sulfonate adsorption/desorption as a probe reaction to understand the electron-transfer steps in polymer and liquid electrolytes.Through cyclic voltametric investigations on the well-define single-crystal Pd_(ML)Pt(111)electrode,we demonstrate that the oxidative adsorption and reductive desorption of sulfonates at the polymer electrolyte/electrode interface are chemically distinct from those in liquid electrolytes,with the former occurring mostly via the proton-coupled pathway while the latter proceeding mainly through the solvation-mediated pathway.Importantly,the sulfonate adsorption/desorption behaviors of alkylsulfonates become increasingly similar to those in Nafion with longer alkyl chains,suggesting that the interfacial hydrophobicity and solvation environment conferred by the perfluorinated polymer play a decisive role in the electron-transfer mechanism.Results reported in this study highlight the mechanistic distinctions between electron-transfer processes at electrochemical interfaces involving polymer and liquid electrolytes,and provide a framework for understanding electron-transfer processes at polymer electrolyte/electrode interfaces.展开更多
Lithium metal has been considered to be the most promising anode material for the new generation of energy-storage system.However,challenges still stand in protecting lithium metal from spontaneous reactions with elec...Lithium metal has been considered to be the most promising anode material for the new generation of energy-storage system.However,challenges still stand in protecting lithium metal from spontaneous reactions with electrolytes and preventing the dendritic propagation,both of which would lead to undesirable decrease in Coulombic efficiency.Polysulfone(PSf)membrane with high rigidity and free-volume cavities of approximately 0.3 nm was employed to provide a stable interface on the surface of anodic electrode.The isotropic channels were constructed by the interconnected and uniformly distributed free volumes in the polymer matrix,and were expected to be swelled by solvent molecules and anions of lithium salt and to allow Li+ions to pass through onto the electrode surface.As a result,dendrite-free morphology of deposited lithium was observed.The stabilized interface arose from the PSf film was verified by the promoted performances of Cu|Li cells and steady voltage polarization of Li|Li cells.The full cell with PSf coated anode exhibited excellent cyclability(85%capacity retention rate over 400 cycles at 1C)and an outstanding rate capability(117 m Ah g-1 at 5C).The beneficial performances were further verified by the EIS results.This work provides a new strategic idea to settle the dendritic problems of Li metal anodes.展开更多
Since the electrode/electrolyte interface(EEI)is the main redox center of electrochemical processes,proper manipulation of the EEI microenvironment is crucial to stabilize interfacial behaviors.Here,a finger-paint met...Since the electrode/electrolyte interface(EEI)is the main redox center of electrochemical processes,proper manipulation of the EEI microenvironment is crucial to stabilize interfacial behaviors.Here,a finger-paint method is proposed to enable quick physical modification of glass-fiber separator without complicated chemical technology to modulate EEI of bilateral electrodes for aqueous zinc-ion batteries(ZIBs).An elaborate biochar derived from Aspergillus Niger is exploited as the modification agent of EEI,in which the multi-functional groups assist to accelerate Zn^(2+)desolvation and create a hydrophobic environment to homogenize the deposition behavior of Zn anode.Importantly,the finger-paint interface on separator can effectively protect cathodes from abnormal capacity fluctuation and/or rapid attenuation induced by H_(2)O molecular on the interface,which is demonstrated in modified MnO_(2),V_(2)O_(5),and KMn HCF-based cells.The as-proposed finger-paint method opens a new idea of bilateral interface engineering to facilitate the access to the practical application of the stable zinc electrochemistry.展开更多
Hydrogen evolution reaction(HER)catalytic electrodes under actual working conditions show interesting mass transfer behaviors at solid(electrode)/liquid(electrolyte)/gas(hydrogen)three-phase interfaces.These behaviors...Hydrogen evolution reaction(HER)catalytic electrodes under actual working conditions show interesting mass transfer behaviors at solid(electrode)/liquid(electrolyte)/gas(hydrogen)three-phase interfaces.These behaviors are essential for forming a continuous and effective physical contact region between the electrolyte and the electrode and require further detailed understanding.Here,a case study on 1 T-2 H phase molybdenum disulfide(Mo S_(2))/carbon fiber paper(CFP)catalytic electrodes is performed.Rapid gas-liquid mass transfer at the interface for enhancing the working area stability and capillarity for increasing the electrode working area is found.The real scenario,wherein the energy utilization efficiency of the as-prepared non-noble metal catalytic electrode exceeds that of the noble metal catalytic electrode,is disclosed.Specifically,a fluid dynamics model is developed to investigate the behavior mechanism of hydrogen bubbles from generation to desorption on the catalytic electrode surface with different hydrophilic and hydrophobic properties.These new insights and theoretical evidence on the non-negligible three-phase interface behaviors will identify opportunities and motivate future research in high-efficiency,stability,and low-cost HER catalytic electrode development.展开更多
A new approach named“caterpillar melt method”was developed to prepare wire type antimony oxide electrode for pH measurement in agar medium for tissue culture.A micro antimony wire was prepared from melt of the metal...A new approach named“caterpillar melt method”was developed to prepare wire type antimony oxide electrode for pH measurement in agar medium for tissue culture.A micro antimony wire was prepared from melt of the metal with the help of a glass capillary and the surface of the wire was oxidized in nitrate melt to obtain an antimony oxide electrode. Characterization results showed that the oxide layer is dense and uniform,with high physical and chemical stability.The electrode has a fast and stable response toward pH change for aqueous solutions.The potential of the antimony electrode has a linear relationship with the pH of the solution (R^2=1.00) with a sensitivity of 54.1mV/pH.The electrode works well and is more stable in agar medium during tissue culture for pH monitoring.展开更多
In this paper a pH microprobe technique was developed to measure in-situ the pH value at the electrode/solution interface. Iridium oxide was used as a pH sensitive material with good response behavior in the measured ...In this paper a pH microprobe technique was developed to measure in-situ the pH value at the electrode/solution interface. Iridium oxide was used as a pH sensitive material with good response behavior in the measured solutions. The experimental results indicated that the interfacial pH increased with the applied potential, first jumped to a maximum, then slowly decreased at the controlled potential during the electrodeposition process of functional ceramics.展开更多
A suitable interface between the electrode and electrolyte is crucial in achieving highly stable electrochemical performance for Li-ion batteries,as facile ionic transport is required.Intriguing research and developme...A suitable interface between the electrode and electrolyte is crucial in achieving highly stable electrochemical performance for Li-ion batteries,as facile ionic transport is required.Intriguing research and development have recently been conducted to form a stable interface between the electrode and electrolyte.Therefore,it is essential to investigate emerging knowledge and contextualize it.The nanoengineering of the electrode-electrolyte interface has been actively researched at the electrode/electrolyte and interphase levels.This review presents and summarizes some recent advances aimed at nanoengineering approaches to build a more stable electrode-electrolyte interface and assess the impact of each approach adopted.Furthermore,future perspectives on the feasibility and practicality of each approach will also be reviewed in detail.Finally,this review aids in projecting a more sustainable research pathway for a nanoengineered interphase design between electrode and electrolyte,which is pivotal for high-performance,thermally stable Li-ion batteries.展开更多
Rechargeable magnesium-ion(Mg-ion)batteries have attracted wide attention for energy storage.However,magnesium anode is still limited by the irreversible Mg plating/stripping procedure.Herein,a well-designed binary Bi...Rechargeable magnesium-ion(Mg-ion)batteries have attracted wide attention for energy storage.However,magnesium anode is still limited by the irreversible Mg plating/stripping procedure.Herein,a well-designed binary Bi_(2)O_(3)-Bi_(2)S_(3)(BO-BS)heterostructure is fulfilled by virtue of the cooperative interface and energy band engineering targeted fast Mg-ion storage.The built-in electronic field resulting from the asymmetrical electron distribution at the interface of electron-rich S center at Bi_(2)S_(3) side and electron-poor O center at Bi_(2)O_(3) side effectively accelerates the electrochemical reaction kinetics in the Mg-ion battery system.Moreover,the as-designed heterogenous interface also benefits to maintaining the electrode integrity.With these advantages,the BO-BS electrode displays a remarkable capacity of 150.36 mAh g^(−1) at 0.67 A g^(-1) and a superior cycling stability.This investigation would offer novel insights into the rational design of functional heterogenous electrode materials targeted the fast reaction kinetics for energy storage systems.展开更多
Perovskite-based photovoltaic materials have been attracting attention for their strikingly improved performance at converting sunlight into electricity.The beneficial and unique optoelectronic characteristics of pero...Perovskite-based photovoltaic materials have been attracting attention for their strikingly improved performance at converting sunlight into electricity.The beneficial and unique optoelectronic characteristics of perovskite structures enable researchers to achieve an incredibly remarkable power conversion efficiency.Flexible hybrid perovskite photovoltaics promise emerging applications in a myriad of optoelectronic and wearable/portable device applications owing to their inherent intriguing physicochemical and photophysical properties which enabled researchers to take forward advanced research in this growing field.Flexible perovskite photovoltaics have attracted significant attention owing to their fascinating material properties with combined merits of high efficiency,light-weight,flexibility,semitransparency,compatibility towards roll-to-roll printing,and large-area mass-scale production.Flexible perovskite-based solar cells comprise of 4 key components that include a flexible substrate,semi-transparent bottom contact electrode,perovskite(light absorber layer)and charge transport(electron/hole)layers and top(usually metal)electrode.Among these components,interfacial layers and contact electrodes play a pivotal role in influencing the overall photovoltaic performance.In this comprehensive review article,we focus on the current developments and latest progress achieved in perovskite photovoltaics concerning the charge selective transport layers/electrodes toward the fabrication of highly stable,efficient flexible devices.As a concluding remark,we briefly summarize the highlights of the review article and make recommendations for future outlook and investigation with perspectives on the perovskite-based optoelectronic functional devices that can be potentially utilized in smart wearable and portable devices.展开更多
Lithium-sulfur(Li-S)battery is recognized for the high theoretical energy density and cost-effective raw materials.However,the instability of Li metal anodes limits the cycle life of Li-S batteries under practical con...Lithium-sulfur(Li-S)battery is recognized for the high theoretical energy density and cost-effective raw materials.However,the instability of Li metal anodes limits the cycle life of Li-S batteries under practical conditions.In this study,we propose a dual interface-passivating regulation strategy using nitrocellulose(NC),a macromolecular nitrate,to stabilize the interface/interphase between the electrolyte and Li metal anode.Specifically,the macromolecular crowding effect and the reduction in lithium polysulfides(LiPSs)activity through nitrate coordination endow NC desirable bifunctionality to simultaneously suppress the depletion of Li salts and LiPSs corrosion,leading to better interface passivation than mono-functional additives such as LiNO_(3)and carboxymethyl cellulose.Consequently,the cycle life of Li-S batteries under practically demanding conditions(50μm Li anodes;4.0 mg cm^(-2)S athodes)is extended to 180 cycles,outperforming those of additive-free or LiNO_(3)-containing commercial electrolytes.This study highlights the potential of bifunctional macromolecular additive design for effectively dual-passivating the anode/electrolyte interface towards highly stable practical Li-S batteries.展开更多
The growth of dendrites and the side reactions occurring at the Zn anode pose significant challenges to the commercialization of aqueous Zn-ion batteries(AZIBs). These challenges arise from the inherent conflict betwe...The growth of dendrites and the side reactions occurring at the Zn anode pose significant challenges to the commercialization of aqueous Zn-ion batteries(AZIBs). These challenges arise from the inherent conflict between mass transfer and electrochemical kinetics. In this study, we propose the use of a multifunctional electrolyte additive based on the xylose(Xylo) molecule to address these issues by modulating the solvation structure and electrode/electrolyte interface, thereby stabilizing the Zn anode. The introduction of the additive alters the solvation structure, creating steric hindrance that impedes charge transfer and then reduces electrochemical kinetics. Furthermore, in-situ analyses demonstrate that the reconstructed electrode/electrolyte interface facilitates stable and rapid Zn^(2+)ion migration and suppresses corrosion and hydrogen evolution reactions. As a result, symmetric cells incorporating the Xylo additive exhibit significantly enhanced reversibility during the Zn plating/stripping process, with an impressively long lifespan of up to 1986 h, compared to cells using pure ZnSO4electrolyte. When combined with a polyaniline cathode, the full cells demonstrate improved capacity and long-term cyclic stability. This work offers an effective direction for improving the stability of Zn anode via electrolyte design, as well as highperformance AZIBs.展开更多
Production of green hydrogen through water electrolysis powered by renewable energy sources has garnered increasing attention as an attractive strategy for the storage of clean and sustainable energy.Among various ele...Production of green hydrogen through water electrolysis powered by renewable energy sources has garnered increasing attention as an attractive strategy for the storage of clean and sustainable energy.Among various electrolysis technologies,the emerging anion exchange membrane water electrolyser(AEMWE)exhibits the most potential for green hydrogen production,offering a potentially costeffective and sustainable approach that combines the advantages of high current density and fast start from proton exchange membrane water electrolyser(PEMWE)and low-cost catalyst from traditional alkaline water electrolyser(AWE)systems.Due to its relatively recent emergence over the past decade,a series of efforts are dedicated to improving the electrochemical reaction performance to accelerate the development and commercialization of AEMWE technology.A catalytic electrode comprising a gas diffusion layer(GDL)and a catalyst layer(CL)is usually called a gas diffusion electrode(GDE)that serves as a fundamental component within AEMWE,and also plays a core role in enhancing mass transfer during the electrolysis process.Inside the GDEs,bubbles nucleate and grow within the CL and then are transported through the GDL before eventually detaching to enter the electrolyte in the flow field.The transfer processes of water,gas bubbles,charges,and ions are intricately influenced by bubbles.This phenomenon is referred to as bubble-associated mass transfer.Like water management in fuel cells,effective bubble management is crucial in electrolysers,as its failure can result in various overpotential losses,such as activation losses,ohmic losses,and mass transfer losses,ultimately degrading the AEMWE performance.Despite significant advancements in the development of new materials and techniques in AEMWE,there is an urgent need for a comprehensive discussion focused on GDEs,with a particular emphasis on bubbleassociated mass transfer phenomena.This review aims to highlight recent findings regarding mass transfer in GDEs,particularly the impacts of bubble accumulation;and presents the latest advancements in designing CLs and GDLs to mitigate bubble-related issues.It is worth noting that a series of innovative bubble-free-GDE designs for water electrolysis are also emphasized in this review.This review is expected to be a valuable reference for gaining a deeper understanding of bubble-related mass transfer,especially the complex bubble behavior associated with GDEs,and for developing innovative practical strategies to advance AEMWE for green hydrogen production.展开更多
Liquid phosphoric acid(PA),as the proton carrier for high temperature polymer electrolyte membrane fuel cells(HT-PEMFCs),presents challenges such as catalyst poisoning,high gas transport resistance and electrolyte los...Liquid phosphoric acid(PA),as the proton carrier for high temperature polymer electrolyte membrane fuel cells(HT-PEMFCs),presents challenges such as catalyst poisoning,high gas transport resistance and electrolyte loss.These issues significantly impede the performance and durability of HT-PEMFCs,thereby limiting their potential for further application.In this study,poly(2,3,5,6-tetrafluorostylene-4-phosphonic acid)(PWN)with intrinsic proton conduction ability was employed as catalyst layer binder to reveal the impacts of the ionomer's molecular structure on mass transport within the catalyst layer.Our findings demonstrated that increasing the phosphorylation degree of PWN could enhance both pore formation at the catalyst layer and electrode acidophilic capability while improving proton conduction ability and reducing cells'internal resistance.However,adverse effects included increased local oxygen transport resistance and decreased catalyst utilization resulting from electrode acidophilic capability.This research offers valuable insights for the relationships between micro-scale molecule structure,mesoscale electrode architecture,and membrane electrode assembly design in HT-PEMFCs.展开更多
A new approach for assembling amperometric mushroom pulp tissue based membrane electrode for determination of L tyrosine analysis is proposed. Ferrocene is used as a mediator of electron transfer between tyrosinase ...A new approach for assembling amperometric mushroom pulp tissue based membrane electrode for determination of L tyrosine analysis is proposed. Ferrocene is used as a mediator of electron transfer between tyrosinase in mushroom tissue and a graphite electrode. The optimal operation conditions are studied. The linear response range of the biosensor is 2 0×10 -4 to 4 5×10 -3 mol·L -1 with response time of less than 5 min and lifetime of at least 30 d. The biosensor can be applied to practical sample analysis.展开更多
For improving the theory of gradient microstructure of cartilage/bone interface, human distal femurs were studied. Scanning Electron Microscope （SEM）, histological sections and MicroCT were used to observe, measure ...For improving the theory of gradient microstructure of cartilage/bone interface, human distal femurs were studied. Scanning Electron Microscope （SEM）, histological sections and MicroCT were used to observe, measure and model the micro- structure of cartilage/bone interface. The results showed that the cartilage/bone interface is in a hierarchical structure which is composed of four different tissue layers. The interlocking of hyaline cartilage and calcified cartilage and that of calcified car- tilage and subchondral bone are in the manner of＂protrusion-pore＂ with average diameter of 17.0 gm and 34.1 lam respectively. In addition, the cancellous bone under the cartilage is also formed by four layer hierarchical structure, and the adjacent layers are connected by bone trabecula in the shape of H, I and Y, forming a complex interwoven network structure. Finally, the simplified structure model of the cartilage/bone interface was proposed according to the natural articular cartilage/bone interface. The simplified model is a 4-layer gradient biomimetic structure, which corresponds to four different tissues of natural cartilage/bone interface. The results of this work would be beneficial to the design of bionic scaffold for the tissue engineering of articular cartilage/bone.展开更多
The rapid development and widespread application of lithium-ion batteries(LIBs) have increased demand for high-safety and high-performance LIBs. Accordingly, various additives have been used in commercial liquid elect...The rapid development and widespread application of lithium-ion batteries(LIBs) have increased demand for high-safety and high-performance LIBs. Accordingly, various additives have been used in commercial liquid electrolytes to severally adjust the solvation structure of lithium ions, control the components of solid electrolyte interphase, or reduce flammability. While it is highly desirable to develop low-cost multifunctional electrolyte additives integrally that address both safety and performance on LIBs, significant challenges remain. Herein, a novel phosphorus-containing organic small molecule, bis(2-methoxyethyl) methylphosphonate(BMOP), was rationally designed to serve as a fluorine-free and multifunctional additive in commercial electrolytes. This novel electrolyte additive is low-toxicity,high-efficiency, low-cost, and electrode-compatible, which shows the significant improvement to both electrochemical performance and fire safety for LIBs through regulating the electrolyte solvation structure, constructing the stable electrode-electrolyte interphase, and suppressing the electrolyte combustion. This work provides a new avenue for developing safer and high-performance LIBs.展开更多
Inorganic solid-state electrolytes(SSEs)are nonflammable alternatives to the commercial liquid-phase electrolytes.This enables the use of lithium(Li)metal as an anode,providing high-energy density and improved stabili...Inorganic solid-state electrolytes(SSEs)are nonflammable alternatives to the commercial liquid-phase electrolytes.This enables the use of lithium(Li)metal as an anode,providing high-energy density and improved stability by avoiding unwanted liquid-phase chemical reactions.Among the different types of SSEs,the garnet-type electrolytes witness a rapid development and are considered as one of the top candidates to pair with Li metal due to their high ionic conductivity,thermal,and electrochemical stability.However,the large resistances at the interface between garnet-type electrolytes and cathode/anode are the major bottlenecks for delivering desirable electrochemical performances of all-solid-state batteries(SSBs).The electrolyte/anode interface also suffers from metallic dendrite formation,leading to rapid performance degradation.This is a fundamental material challenge due to the poor contact and wettability between garnet-type electrolytes with electrode materials.Here,we summarize and analyze the recent contributions in mitigating such materials challenges at the interface.Strategies used to address these challenges are divided into different categories with regard to their working principles.On one hand,progress has been made in the anode/garnet interface,such as the successful application of Li-alloy anode and different artificial interlayers,significantly improving interfacial performance.On the other hand,the desired cathode/garnet interface is still hard to reach due to the complex chemical and physical structure at the cathode.The common methods used are nanostructured cathode host and sintering additives for increasing the contact area.On the basis of this information,we present our views on the remaining challenges and future research of electrode/garnet interface.This review not only motivates the need for further understanding of the fundamentals,stability,and modifications of the garnet/electrode interfaces but also provides guidelines for the future design of the interface for SSB.展开更多
Flaky and vertical gas diffusion electrode was propos, ed to improve the efficiency of fuel cells. The discharge experiments were done to compare the discharge capability of the electrode with different PTFE ingredien...Flaky and vertical gas diffusion electrode was propos, ed to improve the efficiency of fuel cells. The discharge experiments were done to compare the discharge capability of the electrode with different PTFE ingredient and different basal body uniformity. The results showed the electrode with 10% PTFE and high uniformity was favorable to discharge. This single electrode could discharge about 100 h at 150 mA(no noble metal catalyst). The electrode made of the punched screens was superior to that made of the foam Ni.展开更多
基金The Open Project of State Key Laboratory of Smart Grid Protection and Operation Control in 2022(No.SGNR0000KJJS2302150).
文摘Fully implanted brain-computer interfaces(BCIs)are preferred as they eliminate signal degradation caused by interference and absorption in external tissues,a common issue in non-fully implanted systems.To optimize the design of electroencephalography electrodes in fully implanted BCI systems,this study investigates the penetration and absorption characteristics of microwave signals in human brain tissue at different frequencies.Electromagnetic simulations are used to analyze the power density distribution and specific absorption rate(SAR)of signals at various frequen-cies.The results indicate that lower-frequency signals offer advantages in terms of power density and attenuation coeffi-cients.However,SAR-normalized analysis,which considers both power density and electromagnetic radiation hazards,shows that higher-frequency signals perform better at superficial to intermediate depths.Specifically,at a depth of 2 mm beneath the cortex,the power density of a 6.5 GHz signal is 247.83%higher than that of a 0.4 GHz signal.At a depth of 5 mm,the power density of a 3.5 GHz signal exceeds that of a 0.4 GHz signal by 224.16%.The findings suggest that 6.5 GHz is optimal for electrodes at a depth of 2 mm,3.5 GHz for 5 mm,2.45 GHz for depths of 15-20 mm,and 1.8 GHz for 25 mm.
基金financially supported by the National Natural Science Foundation of China(No.21703152,21801136,52025013,and 22121005)the National Key R&D Program of China(2021YFB4000200)the Natural Science Foundation of Tianjin(No.19JCQNJC02000)。
文摘Optimizing electrolytes is non-trivial and yet promising strategies to simultaneously address dendrite growth and parasitic reactions for aqueous zinc-ion batteries.Herein,we present a low-cost zwitterionic additive,1-butylsulfonic-3-methylimidazolium(BSM),to enhance conventional ZnSO_(4)electrolytes.Combining experimental characterization and theoretical calculations,the results reveal that the zincophilic sulfonate groups in BSM partially substitute coordinated H_(2)O molecules in the Zn^(2+)hydration shell,thereby optimizing solvation dynamics.Meanwhile,the imidazole groups are preferentially adsorbed onto the zinc anode surface,forming an adaptive layer that guides uniform Zn^(2+)deposition along the(002)crystal orientation,suppresses parasitic reaction,and mitigates dendrite growth.Consequently,the Zn||Zn symmetric cells with BSM electrolyte achieve an exceptional plating/stripping lifespan of 4000 h at 1 mA cm^(-2)(1 mA h cm^(-2))and over 1600 h under elevated current density(5 mA cm^(-2),5 mA h cm^(-2)).Moreover,the Zn||Cu asymmetric cell demonstrates a long cycle life exceeding 1100 cycles while it maintains an average Coulombic efficiency(CE)of above 99.5%.Impressively,the assembled Zn||NH_(4)V_(4)O_(10)(NVO)full cell with BSM modified ZnSO_(4)electrolyte retains 77.6%capacity retention after 1000 cycles at 5 A g^(-1).Thus,this work establishes a dual-regulatory mechanism through zwitterionic additives to enable dendrite-free anodes and ultra-stable aqueous metal batteries.
基金supported by the National Key R&D Program of China(No.2021YFA1501003)。
文摘Electron transfer processes at polymer electrolyte/electrode interfaces play a central role in modern electrochemical devices of energy conversion,however,current understanding of electron transfers through electrochemical interfaces was established exclusively based on the studies of liquid/solid electrochemical interfaces.Thus,similarities and differences of liquid and polymer electrolyte/electrode interfaces need to be mapped out to guide the design of device level electrochemical interfaces.In this work,we employ the sulfonate adsorption/desorption as a probe reaction to understand the electron-transfer steps in polymer and liquid electrolytes.Through cyclic voltametric investigations on the well-define single-crystal Pd_(ML)Pt(111)electrode,we demonstrate that the oxidative adsorption and reductive desorption of sulfonates at the polymer electrolyte/electrode interface are chemically distinct from those in liquid electrolytes,with the former occurring mostly via the proton-coupled pathway while the latter proceeding mainly through the solvation-mediated pathway.Importantly,the sulfonate adsorption/desorption behaviors of alkylsulfonates become increasingly similar to those in Nafion with longer alkyl chains,suggesting that the interfacial hydrophobicity and solvation environment conferred by the perfluorinated polymer play a decisive role in the electron-transfer mechanism.Results reported in this study highlight the mechanistic distinctions between electron-transfer processes at electrochemical interfaces involving polymer and liquid electrolytes,and provide a framework for understanding electron-transfer processes at polymer electrolyte/electrode interfaces.
基金supported by the Opening Project(SKLACPS-C-21)of the State Key Laboratory of Advanced Chemical Power Source,Guizhou Meiling Power Sources Co.Ltd.the Program for Innovative and Entrepreneurial team in Zhuhai(ZH01110405160007PWC)Key Laboratory of Advanced Chemical Power Sources,Guizhou Meiling Power Sources Co.Ltd.,Zunyi 563003,Guizhou,China,for funding the experiments.
文摘Lithium metal has been considered to be the most promising anode material for the new generation of energy-storage system.However,challenges still stand in protecting lithium metal from spontaneous reactions with electrolytes and preventing the dendritic propagation,both of which would lead to undesirable decrease in Coulombic efficiency.Polysulfone(PSf)membrane with high rigidity and free-volume cavities of approximately 0.3 nm was employed to provide a stable interface on the surface of anodic electrode.The isotropic channels were constructed by the interconnected and uniformly distributed free volumes in the polymer matrix,and were expected to be swelled by solvent molecules and anions of lithium salt and to allow Li+ions to pass through onto the electrode surface.As a result,dendrite-free morphology of deposited lithium was observed.The stabilized interface arose from the PSf film was verified by the promoted performances of Cu|Li cells and steady voltage polarization of Li|Li cells.The full cell with PSf coated anode exhibited excellent cyclability(85%capacity retention rate over 400 cycles at 1C)and an outstanding rate capability(117 m Ah g-1 at 5C).The beneficial performances were further verified by the EIS results.This work provides a new strategic idea to settle the dendritic problems of Li metal anodes.
基金financial support from the National Natural Science Foundation of China (21571080 and 52202253)the Natural Science Foundation of Jiangsu Province (BK20220914)+2 种基金Project funded by China Postdoctoral Science Foundation (2022M721593)the Jiangsu Funding Program for Excellent Postdoctoral Talent (2022ZB193)the financial support from International Center of Future Science,Jilin University,Changchun,P.R.China (ICFS Seed Funding for Young Researchers)。
文摘Since the electrode/electrolyte interface(EEI)is the main redox center of electrochemical processes,proper manipulation of the EEI microenvironment is crucial to stabilize interfacial behaviors.Here,a finger-paint method is proposed to enable quick physical modification of glass-fiber separator without complicated chemical technology to modulate EEI of bilateral electrodes for aqueous zinc-ion batteries(ZIBs).An elaborate biochar derived from Aspergillus Niger is exploited as the modification agent of EEI,in which the multi-functional groups assist to accelerate Zn^(2+)desolvation and create a hydrophobic environment to homogenize the deposition behavior of Zn anode.Importantly,the finger-paint interface on separator can effectively protect cathodes from abnormal capacity fluctuation and/or rapid attenuation induced by H_(2)O molecular on the interface,which is demonstrated in modified MnO_(2),V_(2)O_(5),and KMn HCF-based cells.The as-proposed finger-paint method opens a new idea of bilateral interface engineering to facilitate the access to the practical application of the stable zinc electrochemistry.
基金supported by the National Natural Science Foundation of China(No.62004051)the Natural Science Foundation of Heilongjiang province(No.LH2020F013)+1 种基金the China Postdoctoral Science Fund(No.2020M670909)the Heilongjiang Postdoctoral Science Fund(No.LBH-Z19017)。
文摘Hydrogen evolution reaction(HER)catalytic electrodes under actual working conditions show interesting mass transfer behaviors at solid(electrode)/liquid(electrolyte)/gas(hydrogen)three-phase interfaces.These behaviors are essential for forming a continuous and effective physical contact region between the electrolyte and the electrode and require further detailed understanding.Here,a case study on 1 T-2 H phase molybdenum disulfide(Mo S_(2))/carbon fiber paper(CFP)catalytic electrodes is performed.Rapid gas-liquid mass transfer at the interface for enhancing the working area stability and capillarity for increasing the electrode working area is found.The real scenario,wherein the energy utilization efficiency of the as-prepared non-noble metal catalytic electrode exceeds that of the noble metal catalytic electrode,is disclosed.Specifically,a fluid dynamics model is developed to investigate the behavior mechanism of hydrogen bubbles from generation to desorption on the catalytic electrode surface with different hydrophilic and hydrophobic properties.These new insights and theoretical evidence on the non-negligible three-phase interface behaviors will identify opportunities and motivate future research in high-efficiency,stability,and low-cost HER catalytic electrode development.
基金This project is sponsored by the Scientific Research Foundation for the Returned 0verseas Chinese Scholars；State EducationMinistry；the Zhejiang Natural Science Foundation under Grant No. Y404325.
文摘A new approach named“caterpillar melt method”was developed to prepare wire type antimony oxide electrode for pH measurement in agar medium for tissue culture.A micro antimony wire was prepared from melt of the metal with the help of a glass capillary and the surface of the wire was oxidized in nitrate melt to obtain an antimony oxide electrode. Characterization results showed that the oxide layer is dense and uniform,with high physical and chemical stability.The electrode has a fast and stable response toward pH change for aqueous solutions.The potential of the antimony electrode has a linear relationship with the pH of the solution (R^2=1.00) with a sensitivity of 54.1mV/pH.The electrode works well and is more stable in agar medium during tissue culture for pH monitoring.
文摘In this paper a pH microprobe technique was developed to measure in-situ the pH value at the electrode/solution interface. Iridium oxide was used as a pH sensitive material with good response behavior in the measured solutions. The experimental results indicated that the interfacial pH increased with the applied potential, first jumped to a maximum, then slowly decreased at the controlled potential during the electrodeposition process of functional ceramics.
基金supported by funding from Bavarian Center for Battery Technology(Baybatt,Hightech Agenda Bayern)and Bayerisch-Tschechische Hochschulagentur(BTHA)(BTHA-AP-202245,BTHA-AP-2023-5,and BTHA-AP-2023-12)supported by the University of Bayreuth-Deakin University Joint Ph.D.Program+1 种基金supported by the Regional Innovation Strategy(RIS)through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(MOE)(2021RIS-003)supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(No.RS2023-00213749)
文摘A suitable interface between the electrode and electrolyte is crucial in achieving highly stable electrochemical performance for Li-ion batteries,as facile ionic transport is required.Intriguing research and development have recently been conducted to form a stable interface between the electrode and electrolyte.Therefore,it is essential to investigate emerging knowledge and contextualize it.The nanoengineering of the electrode-electrolyte interface has been actively researched at the electrode/electrolyte and interphase levels.This review presents and summarizes some recent advances aimed at nanoengineering approaches to build a more stable electrode-electrolyte interface and assess the impact of each approach adopted.Furthermore,future perspectives on the feasibility and practicality of each approach will also be reviewed in detail.Finally,this review aids in projecting a more sustainable research pathway for a nanoengineered interphase design between electrode and electrolyte,which is pivotal for high-performance,thermally stable Li-ion batteries.
基金supported by the National Natural Science Foundation of China(52172239)Project of State Key Laboratory of Environment-Friendly Energy Materials(SWUST,Grant Nos.22fksy23 and 18ZD320304)+3 种基金the Frontier Project of Chengdu Tianfu New Area Institute(SWUST,Grand No.2022ZY017)Chongqing Talents:Exceptional Young Talents Project(Grant No.CQYC201905041)Natural Science Foundation of Chongqing China(Grant No.cstc2021jcyj-jqX0031)Interdiscipline Team Project under auspices of“Light of West”Program in Chinese Academy of Sciences(Grant No.xbzg-zdsys-202106).
文摘Rechargeable magnesium-ion(Mg-ion)batteries have attracted wide attention for energy storage.However,magnesium anode is still limited by the irreversible Mg plating/stripping procedure.Herein,a well-designed binary Bi_(2)O_(3)-Bi_(2)S_(3)(BO-BS)heterostructure is fulfilled by virtue of the cooperative interface and energy band engineering targeted fast Mg-ion storage.The built-in electronic field resulting from the asymmetrical electron distribution at the interface of electron-rich S center at Bi_(2)S_(3) side and electron-poor O center at Bi_(2)O_(3) side effectively accelerates the electrochemical reaction kinetics in the Mg-ion battery system.Moreover,the as-designed heterogenous interface also benefits to maintaining the electrode integrity.With these advantages,the BO-BS electrode displays a remarkable capacity of 150.36 mAh g^(−1) at 0.67 A g^(-1) and a superior cycling stability.This investigation would offer novel insights into the rational design of functional heterogenous electrode materials targeted the fast reaction kinetics for energy storage systems.
基金the CSIRO Low Emissions Technologies Program for the support of this studythe financial support from the Australian Research Council(ARC)for the Future Fellowship(FT130101337)+4 种基金QUT core funding(QUT/322120-0301/07)supported by NSF MRI(1428992)U.S.-Egypt Science and Technology(S&T)Joint FundSDBoR R&D ProgramEDA University Center Program(ED18DEN3030025)。
文摘Perovskite-based photovoltaic materials have been attracting attention for their strikingly improved performance at converting sunlight into electricity.The beneficial and unique optoelectronic characteristics of perovskite structures enable researchers to achieve an incredibly remarkable power conversion efficiency.Flexible hybrid perovskite photovoltaics promise emerging applications in a myriad of optoelectronic and wearable/portable device applications owing to their inherent intriguing physicochemical and photophysical properties which enabled researchers to take forward advanced research in this growing field.Flexible perovskite photovoltaics have attracted significant attention owing to their fascinating material properties with combined merits of high efficiency,light-weight,flexibility,semitransparency,compatibility towards roll-to-roll printing,and large-area mass-scale production.Flexible perovskite-based solar cells comprise of 4 key components that include a flexible substrate,semi-transparent bottom contact electrode,perovskite(light absorber layer)and charge transport(electron/hole)layers and top(usually metal)electrode.Among these components,interfacial layers and contact electrodes play a pivotal role in influencing the overall photovoltaic performance.In this comprehensive review article,we focus on the current developments and latest progress achieved in perovskite photovoltaics concerning the charge selective transport layers/electrodes toward the fabrication of highly stable,efficient flexible devices.As a concluding remark,we briefly summarize the highlights of the review article and make recommendations for future outlook and investigation with perspectives on the perovskite-based optoelectronic functional devices that can be potentially utilized in smart wearable and portable devices.
基金supported by the National Natural Science Foundation of China(22379021 and 22479021)。
文摘Lithium-sulfur(Li-S)battery is recognized for the high theoretical energy density and cost-effective raw materials.However,the instability of Li metal anodes limits the cycle life of Li-S batteries under practical conditions.In this study,we propose a dual interface-passivating regulation strategy using nitrocellulose(NC),a macromolecular nitrate,to stabilize the interface/interphase between the electrolyte and Li metal anode.Specifically,the macromolecular crowding effect and the reduction in lithium polysulfides(LiPSs)activity through nitrate coordination endow NC desirable bifunctionality to simultaneously suppress the depletion of Li salts and LiPSs corrosion,leading to better interface passivation than mono-functional additives such as LiNO_(3)and carboxymethyl cellulose.Consequently,the cycle life of Li-S batteries under practically demanding conditions(50μm Li anodes;4.0 mg cm^(-2)S athodes)is extended to 180 cycles,outperforming those of additive-free or LiNO_(3)-containing commercial electrolytes.This study highlights the potential of bifunctional macromolecular additive design for effectively dual-passivating the anode/electrolyte interface towards highly stable practical Li-S batteries.
文摘The growth of dendrites and the side reactions occurring at the Zn anode pose significant challenges to the commercialization of aqueous Zn-ion batteries(AZIBs). These challenges arise from the inherent conflict between mass transfer and electrochemical kinetics. In this study, we propose the use of a multifunctional electrolyte additive based on the xylose(Xylo) molecule to address these issues by modulating the solvation structure and electrode/electrolyte interface, thereby stabilizing the Zn anode. The introduction of the additive alters the solvation structure, creating steric hindrance that impedes charge transfer and then reduces electrochemical kinetics. Furthermore, in-situ analyses demonstrate that the reconstructed electrode/electrolyte interface facilitates stable and rapid Zn^(2+)ion migration and suppresses corrosion and hydrogen evolution reactions. As a result, symmetric cells incorporating the Xylo additive exhibit significantly enhanced reversibility during the Zn plating/stripping process, with an impressively long lifespan of up to 1986 h, compared to cells using pure ZnSO4electrolyte. When combined with a polyaniline cathode, the full cells demonstrate improved capacity and long-term cyclic stability. This work offers an effective direction for improving the stability of Zn anode via electrolyte design, as well as highperformance AZIBs.
基金support from the National Natural Science Foundation of China(Grant No.52006029)the Promotion Foundation for Young Science and Technology Talents in Jilin Province(Grant No.QT202113)+2 种基金the Special Foundation of Industrial Innovation in Jilin Province(Grant No.2019C056-2)the Special Foundation for Outstanding Young Talents Training in Jilin(Grant No.20200104107)the UK EPSRC(EP/W03784X/1)。
文摘Production of green hydrogen through water electrolysis powered by renewable energy sources has garnered increasing attention as an attractive strategy for the storage of clean and sustainable energy.Among various electrolysis technologies,the emerging anion exchange membrane water electrolyser(AEMWE)exhibits the most potential for green hydrogen production,offering a potentially costeffective and sustainable approach that combines the advantages of high current density and fast start from proton exchange membrane water electrolyser(PEMWE)and low-cost catalyst from traditional alkaline water electrolyser(AWE)systems.Due to its relatively recent emergence over the past decade,a series of efforts are dedicated to improving the electrochemical reaction performance to accelerate the development and commercialization of AEMWE technology.A catalytic electrode comprising a gas diffusion layer(GDL)and a catalyst layer(CL)is usually called a gas diffusion electrode(GDE)that serves as a fundamental component within AEMWE,and also plays a core role in enhancing mass transfer during the electrolysis process.Inside the GDEs,bubbles nucleate and grow within the CL and then are transported through the GDL before eventually detaching to enter the electrolyte in the flow field.The transfer processes of water,gas bubbles,charges,and ions are intricately influenced by bubbles.This phenomenon is referred to as bubble-associated mass transfer.Like water management in fuel cells,effective bubble management is crucial in electrolysers,as its failure can result in various overpotential losses,such as activation losses,ohmic losses,and mass transfer losses,ultimately degrading the AEMWE performance.Despite significant advancements in the development of new materials and techniques in AEMWE,there is an urgent need for a comprehensive discussion focused on GDEs,with a particular emphasis on bubbleassociated mass transfer phenomena.This review aims to highlight recent findings regarding mass transfer in GDEs,particularly the impacts of bubble accumulation;and presents the latest advancements in designing CLs and GDLs to mitigate bubble-related issues.It is worth noting that a series of innovative bubble-free-GDE designs for water electrolysis are also emphasized in this review.This review is expected to be a valuable reference for gaining a deeper understanding of bubble-related mass transfer,especially the complex bubble behavior associated with GDEs,and for developing innovative practical strategies to advance AEMWE for green hydrogen production.
基金supported by The National Key Research and Development Program of China(2021YFB4001204)National Natural Science Foundation of China(22179130,22379143,22479145)。
文摘Liquid phosphoric acid(PA),as the proton carrier for high temperature polymer electrolyte membrane fuel cells(HT-PEMFCs),presents challenges such as catalyst poisoning,high gas transport resistance and electrolyte loss.These issues significantly impede the performance and durability of HT-PEMFCs,thereby limiting their potential for further application.In this study,poly(2,3,5,6-tetrafluorostylene-4-phosphonic acid)(PWN)with intrinsic proton conduction ability was employed as catalyst layer binder to reveal the impacts of the ionomer's molecular structure on mass transport within the catalyst layer.Our findings demonstrated that increasing the phosphorylation degree of PWN could enhance both pore formation at the catalyst layer and electrode acidophilic capability while improving proton conduction ability and reducing cells'internal resistance.However,adverse effects included increased local oxygen transport resistance and decreased catalyst utilization resulting from electrode acidophilic capability.This research offers valuable insights for the relationships between micro-scale molecule structure,mesoscale electrode architecture,and membrane electrode assembly design in HT-PEMFCs.
文摘A new approach for assembling amperometric mushroom pulp tissue based membrane electrode for determination of L tyrosine analysis is proposed. Ferrocene is used as a mediator of electron transfer between tyrosinase in mushroom tissue and a graphite electrode. The optimal operation conditions are studied. The linear response range of the biosensor is 2 0×10 -4 to 4 5×10 -3 mol·L -1 with response time of less than 5 min and lifetime of at least 30 d. The biosensor can be applied to practical sample analysis.
基金This paper was supported by the National Natural Science Foundation of China （Grant No： 50875201） and the National Hi-Tech Program of China （Grant No： 2009AA043801）. The authors thank Professor Yiping Tang from Xi＇an Jiaotong University for improving the manuscript.
文摘For improving the theory of gradient microstructure of cartilage/bone interface, human distal femurs were studied. Scanning Electron Microscope （SEM）, histological sections and MicroCT were used to observe, measure and model the micro- structure of cartilage/bone interface. The results showed that the cartilage/bone interface is in a hierarchical structure which is composed of four different tissue layers. The interlocking of hyaline cartilage and calcified cartilage and that of calcified car- tilage and subchondral bone are in the manner of＂protrusion-pore＂ with average diameter of 17.0 gm and 34.1 lam respectively. In addition, the cancellous bone under the cartilage is also formed by four layer hierarchical structure, and the adjacent layers are connected by bone trabecula in the shape of H, I and Y, forming a complex interwoven network structure. Finally, the simplified structure model of the cartilage/bone interface was proposed according to the natural articular cartilage/bone interface. The simplified model is a 4-layer gradient biomimetic structure, which corresponds to four different tissues of natural cartilage/bone interface. The results of this work would be beneficial to the design of bionic scaffold for the tissue engineering of articular cartilage/bone.
基金supported by the National Natural Science Foundation of China (51773134)the Sichuan Science and Technology Program (2019YFH0112)+2 种基金the Fundamental Research Funds for the Central UniversitiesInstitutional Research Fund from Sichuan University (2021SCUNL201)the 111 Project (B20001)。
文摘The rapid development and widespread application of lithium-ion batteries(LIBs) have increased demand for high-safety and high-performance LIBs. Accordingly, various additives have been used in commercial liquid electrolytes to severally adjust the solvation structure of lithium ions, control the components of solid electrolyte interphase, or reduce flammability. While it is highly desirable to develop low-cost multifunctional electrolyte additives integrally that address both safety and performance on LIBs, significant challenges remain. Herein, a novel phosphorus-containing organic small molecule, bis(2-methoxyethyl) methylphosphonate(BMOP), was rationally designed to serve as a fluorine-free and multifunctional additive in commercial electrolytes. This novel electrolyte additive is low-toxicity,high-efficiency, low-cost, and electrode-compatible, which shows the significant improvement to both electrochemical performance and fire safety for LIBs through regulating the electrolyte solvation structure, constructing the stable electrode-electrolyte interphase, and suppressing the electrolyte combustion. This work provides a new avenue for developing safer and high-performance LIBs.
基金Engineering and Physical Sciences Research Council,Grant/Award Number:EP/S018204/1。
文摘Inorganic solid-state electrolytes(SSEs)are nonflammable alternatives to the commercial liquid-phase electrolytes.This enables the use of lithium(Li)metal as an anode,providing high-energy density and improved stability by avoiding unwanted liquid-phase chemical reactions.Among the different types of SSEs,the garnet-type electrolytes witness a rapid development and are considered as one of the top candidates to pair with Li metal due to their high ionic conductivity,thermal,and electrochemical stability.However,the large resistances at the interface between garnet-type electrolytes and cathode/anode are the major bottlenecks for delivering desirable electrochemical performances of all-solid-state batteries(SSBs).The electrolyte/anode interface also suffers from metallic dendrite formation,leading to rapid performance degradation.This is a fundamental material challenge due to the poor contact and wettability between garnet-type electrolytes with electrode materials.Here,we summarize and analyze the recent contributions in mitigating such materials challenges at the interface.Strategies used to address these challenges are divided into different categories with regard to their working principles.On one hand,progress has been made in the anode/garnet interface,such as the successful application of Li-alloy anode and different artificial interlayers,significantly improving interfacial performance.On the other hand,the desired cathode/garnet interface is still hard to reach due to the complex chemical and physical structure at the cathode.The common methods used are nanostructured cathode host and sintering additives for increasing the contact area.On the basis of this information,we present our views on the remaining challenges and future research of electrode/garnet interface.This review not only motivates the need for further understanding of the fundamentals,stability,and modifications of the garnet/electrode interfaces but also provides guidelines for the future design of the interface for SSB.
文摘Flaky and vertical gas diffusion electrode was propos, ed to improve the efficiency of fuel cells. The discharge experiments were done to compare the discharge capability of the electrode with different PTFE ingredient and different basal body uniformity. The results showed the electrode with 10% PTFE and high uniformity was favorable to discharge. This single electrode could discharge about 100 h at 150 mA(no noble metal catalyst). The electrode made of the punched screens was superior to that made of the foam Ni.
