Two viologen derivatives containing fluorine substituent(F)with an asymmetric structures,1,1'-bis(4-(trifluoromethyl)phenyl)-[4,4'-bipyridine]dihexafluorophosphate(DFPV)and 1-benzyl-1'-(4-(trifluoromethyl)...Two viologen derivatives containing fluorine substituent(F)with an asymmetric structures,1,1'-bis(4-(trifluoromethyl)phenyl)-[4,4'-bipyridine]dihexafluorophosphate(DFPV)and 1-benzyl-1'-(4-(trifluoromethyl)phenyl)-[4,4'-bipyridine]di-hexafluorophosphate(Bn-FPV),were synthesized.These viologen derivatives as active materials were used to assemble both flexible and rigid electrochromic devices(ECDs).ECDs based on DFPV exhibited reversible color change from colorless to deep green and ECDs based on Bn-FPV exhibited reversible color change from colorless to blue-green within applied voltage.It was found that the devices based on DFPV showed cycle stability,which could still maintain more than 90% after 1000 cycles.In addition,the modulation rate of the device to the solar irradiance is also calculated to characterize its application potential in smart windows.Among them,the rigid device(R-DFPV)based on the DFPV has a large solar irradiance modulation rate of 54.66%,which has the potential to be used as smart windows.展开更多
Dual-band electrochromic devices capable of the spectral-selective modulation of visible(VIS)light and near-infrared(NIR)can notably reduce the energy consumption of buildings and improve the occupants’visual and the...Dual-band electrochromic devices capable of the spectral-selective modulation of visible(VIS)light and near-infrared(NIR)can notably reduce the energy consumption of buildings and improve the occupants’visual and thermal comfort.However,the low optical modulation and poor durability of these devices severely limit its practical applications.Herein,we demonstrate an efficient and flexible bifunctional dual-band electrochromic device which not only shows excellent spectral-selective electrochromic performance with a high optical modulation and a long cycle life,but also displays a high capacitance and a high energy recycling efficiency of 51.4%,integrating energy-saving with energy-storage.The nanowires structure and abundant oxygen-vacancies of oxygen-deficient tungsten oxide nanowires endows it high flexibility and a high optical modulation of 73.1%and 85.3%at 633 and 1200 nm respectively.The prototype device assembled can modulate the VIS light and NIR independently and effectively through three distinct modes with a long cycle life(3.3%capacity loss after 10,000 cycles)and a high energy-saving performance(8.8℃lower than the common glass).Furthermore,simulations also demonstrate that our device outperforms the commercial low-emissivity glass in terms of energy-saving in most climatic zones around the world.Such windows represent an intriguing potential technology to improve the building energy efficiency.展开更多
Flexible electrochromic devices(FECDs)demonstrate significant potential for applications in wearable elec-tronics,military camouflage,and flexible smart displays.As a crucial electrochromic material,poly(3,4-ethylened...Flexible electrochromic devices(FECDs)demonstrate significant potential for applications in wearable elec-tronics,military camouflage,and flexible smart displays.As a crucial electrochromic material,poly(3,4-ethylenedioxythiophene):polystyrene sulfonate(PEDOT:PSS)is widely used in FECDs due to its excellent mechanical flexibility,tunable conductivity,and non-toxicity.However,the manufacturing process for patterned PEDOT:PSS electrochromic devices remains intricate,costly,and challenging to personalize.To address this challenge,we have developed a 3D-printable ink with controllable rheological properties through a concentration-tuning strategy,enabling programmable,patterned printing of PEDOT-based conductive polymer electrochromic layers.The 3D-printed FECDs exhibit outstanding electrochromic performance,including a high optical contrast(up to 47.9%at 635 nm),fast response times(t_(c)=1.6 s;t_(b)=0.6 s),high coloration efficiency(352 cm^(2) C^(-1)),and good cycling stability(with only a 9.3%decrease in optical contrast after 100 electrochemical cycles).Finally,we utilize 3D printing technology to construct flexible,patterned PEDOT:PSS electrochromic devices with bespoke butterfly designs.This work establishes the theoretical foundation for the application of 3D printing technology in PEDOT:PSS flexible electrochromic devices.展开更多
In this study,novel electrochromic copolymers of 3,4-ethylenedioxythiophene(EDOT)and(E)-1,2-bis(2-fluoro-4-(4-hexylthiophen-2-yl)phenyl)diazene(M1)with different monomer feed ratios were designed and synthesized elect...In this study,novel electrochromic copolymers of 3,4-ethylenedioxythiophene(EDOT)and(E)-1,2-bis(2-fluoro-4-(4-hexylthiophen-2-yl)phenyl)diazene(M1)with different monomer feed ratios were designed and synthesized electrochemically.Electrochemical and spectroelectrochemical characterizations were performed using voltammetry and UV-Vis-NIR spectrophotometry techniques to test the applicability of copolymers for electrochromic applications.In terms of electrochemical behaviors,addition of an electron-rich EDOT unit into the azobenzenecontaining copolymer increased the electron density on the polymer chain and afforded copolymers with very low oxidation potentials at around0.30 V.While the homopolymers(P1 and PEDOT)exhibited neutral state absorptions centered at 510 and 583 nm,EDOT-bearing copolymers showed red shifted absorptions compared to those of P1 with narrower optical band gaps.In addition,the poor optical contrast and switching times of azobenzene-bearing homopolymer were significantly improved with EDOT addition into the copolymer chain.As a result of the promising electrochromic and kinetic preperties,Co P1.5-bearing single layer electrochromic device that works between purple and light greenish blue colors was constructed and characterized.展开更多
Electrochromic materials are capable of reversibly switching their colors or optical properties through redox reactions under applied voltages,which have shown great potential applications including smart windows,none...Electrochromic materials are capable of reversibly switching their colors or optical properties through redox reactions under applied voltages,which have shown great potential applications including smart windows,nonemissive displays,optical filters,among others.Although the current rigid electrochromic devices have shown emerging interest and developed rapidly,many applications(e.g.,wearable/deformable optoelectronics)are blocked due to their inflexible features.Herein,the adaption of rigid electrochromic devices to flexible ones is of particular interest for the new era of smart optoelectronics.In this review,the current state-of-the-art achievements of flexible electrochromic devices(FECDs)are highlighted,along with their design strategies and the choice of electrochromic materials.The recent research progress of FECDs is reviewed in detail,and the challenges and corresponding solutions for real-world applications of FECDs are discussed.Furthermore,we summarize the basic fabrication strategies of FECDs and their potential applications.In addition,the development trend,the perspectives,and the outlook of FECDs are discussed at the end of this Review,which may provide recommendations and potential directions to advance the practical applications of FECDs.展开更多
Electroactive conducting copolymers of aniline （ANI） and diphenylamine （DPA） are prepared on indium tin oxide （ITO） surface from 1 mol/L H2SO4 aqueous solution with different feed ratios of ANI to DPA by using a...Electroactive conducting copolymers of aniline （ANI） and diphenylamine （DPA） are prepared on indium tin oxide （ITO） surface from 1 mol/L H2SO4 aqueous solution with different feed ratios of ANI to DPA by using a potentiostatic method. FTIR spectra and SEM measurements are used to confirm the formation of copolymers. Due to the combination of the N,N＇-diphenyl benzidine and aniline units in the molecular chain, the copolymer films exhibit improved electrochemical and electrochromic properties, compared to PANI and PDPA. The copolymer [marked as P（ANI9-co-DPA1）] film prepared at a ratio of 9：1 （ANI/DPA） exhibits novel transmittance modulation both in visible and near-infrared （NIR） region between -0.8 V and 0.8 V （52% and 67% respectively） and fast response time （3.6 s for coloration and 2.3 s for bleaching at 600 nm）. An electrochromic device （ECD） based on P（ANI9-co-DPA1） and PEDOT：PSS is also fabricated and shows a multicolor electrochromic performance, with a good optical contrast （29% in visible region and 40% in NIR region）, acceptable response time （8.3 s for coloration and 7.5 s for bleaching at 600 nm） and long-term stability. Clear color changes from transparent （-0.8 V）, bright green （0 V）, seagreen （0.4 V） to dark slate gray （0.8 V） are demonstrated.展开更多
Electrochromic technology has gained significant attention in various fields such as displays,smart windows,biomedical monitoring,military camouflage,human-machine interaction,and electronic skin due to its ability to...Electrochromic technology has gained significant attention in various fields such as displays,smart windows,biomedical monitoring,military camouflage,human-machine interaction,and electronic skin due to its ability to provide reversible and fast color changes under applied voltage.With the rapid development and increasing demand for flexible electronics,flexible electrochromic devices(FECDs)that offer smarter and more controllable light modulation hold great promise for practical applications.The electrochromic material(ECM)undergoing color changes during the electrochemical reactions is one of the key components in electrochromic devices.Among the ECMs,viologens,a family of organic small molecules with 1,1'-disubstituted-4,4'-dipyridinium salts,have garnered extensive research interest,due to their well-reversible redox reactions,excellent electron acceptance ability,and the ability to produce multiple colors.Notably,viologen-based FECDs demonstrate color changes in the liquid or semisolid electrolyte layer,eliminating the need for two solid electrodes and thus simplifying the device structure.Consequently,viologens offer significant potential for the development of FECDs with high optical contrast,fast response speed,and excellent stability.This review aims to provide a comprehensive overview of the progress and perspectives of viologen-based FECDs.It begins by summarizing the typical structure and recent exciting developments in viologen-based FECDs,along with their advantages and disadvantages.Furthermore,the review discusses recent advancements in FECDs with additional functionalities such as sensing,photochromism,and energy storage.Finally,the remaining challenges and potential research directions for the future of viologen-based FECDs are addressed.展开更多
An amorphous,colorless,and highly transparent star network polymer with a pentaerythritol core linking four PEG-block polymeric arms was synthesized from the poly(ethylene glycol)(PEG),pentaerythritol,and dichlorometh...An amorphous,colorless,and highly transparent star network polymer with a pentaerythritol core linking four PEG-block polymeric arms was synthesized from the poly(ethylene glycol)(PEG),pentaerythritol,and dichloromethane by Williamson reaction.FTIR and ~1H-NMR measurement demonstrated that the polymer repeating units were C[CH_2-OCH_2O-(CH_2CH_2O)_m-CH_2O-(CH_2CH_2O)_n-CH_2O]_4.The polymer host held well mechanical properties for pentaerythritol cross-linking.The gel polymer electrolytes based on Lithium pe...展开更多
Zn anode-based electrochromic devices(ZECDs)stand out as a highly promising technology in the upcoming era of multifunctional electronic devices,offering a blend of electrochromic capabilities and energy storage funct...Zn anode-based electrochromic devices(ZECDs)stand out as a highly promising technology in the upcoming era of multifunctional electronic devices,offering a blend of electrochromic capabilities and energy storage functions within a single transparent platform.However,significant challenges persist in achieving efficient patterning,ensuring long-term stability,and fast color-switching kinetics for these devices.In this study,heterogeneous tungsten oxide nanowires(W_(17)O_(47)/Na_(0.1)WO_(3),WNOs)are formulated into inkjet printing ink to assemble patternable ZECDs.The heterogeneous electrode structure of WNO enables a highly capacitive-controlled mechanism that promotes fast electrochromic/electrochemical behavior.Notably,by utilizing a three-dimensional MXene mesh modified substrate,the inkjet-printed ZECDs exhibit a wide optical modulation range of 69.13%,rapid color-changing kinetics(t_(c)=4.1 s,t_(b)=5.4 s),and highly reversible capacities of 70 mAh cm^(-2)over 1000 cycles.This scalable strategy develops the patterned electrodes with a wide optical modulation range and substantial energy storage properties,offering promising prospects for their application in next-generation smart electronics.展开更多
With the global push for energy conservation and the rapid development of low-power,flexible and wearable optical displays,the demand for electrochromic technology has surged.Gel polymer electrolytes(GPEs),a crucial c...With the global push for energy conservation and the rapid development of low-power,flexible and wearable optical displays,the demand for electrochromic technology has surged.Gel polymer electrolytes(GPEs),a crucial component of electrochromic devices(ECDs),show great promise in applications.This is attributed to their efficient ion-transport capabilities,excellent mechanical properties and strong adhesion.All of these characteristics are conducive to enhancing the safety of the devices,streamlining the packaging process,significantly improving the electrochromic performance of ECDs and boosting their commercial application potential.This review provides a comprehensive overview of GPEs for ECDs,focusing on their basic designs,functional modifications and practical applications.Firstly,this review outlines the fundamental design of GPEs for ECDs,encompassing key performance index,classification,gelation mechanism and preparation methods.Building on this foundation,it provides an in-depth discussion of functionalized GPEs developed to enhance device performance or expand functionality,including electrochromic,temperature-responsive,photo-responsive and stretchable self-healing GPE.Furthermore,the integration of GPEs into various ECD applications,including smart windows,displays,energy storage devices and wearable electronic,are summarized to highlight the advantages that the design of GPEs brings to the practical application of ECDs.Finally,based on the summary of GPEs employed for ECDs,the challenges and development expectations in this direction were indicated.展开更多
Zinc anode-based electrochromic devices(ZECDs)represent a new generation of multifunctional electrochromic(EC)platforms,offering cost-effectiveness and high roundtrip efficiency.However,their practical application rem...Zinc anode-based electrochromic devices(ZECDs)represent a new generation of multifunctional electrochromic(EC)platforms,offering cost-effectiveness and high roundtrip efficiency.However,their practical application remains limited due to the electric field inhomogeneity and the growth of Zn dendrites issues primarily caused by the use of opaque peripheral Zinc(Zn)foils.Herein,we rationally designed a transparent(T=71.4%@633 nm),durable and flexible Ag-PVDF(polyvinylidene difluoride)coated Zinc(AP@Zn)mesh electrode.The AP@Zn mesh promotes a homogeneous electric field and potential distribution within ZECDs,exhibits excellent corrosion resistance,and possesses a low activation energy(47.59 kJ mol^(-1)).Furthermore,it demonstrates broad compatibility with various EC electrodes.As a result,a 5 cm×5 cm Prussian blue(PB)//AP@Zn achieved fast switching times(t_(c)/tb 2.8 s/2.6 s),high coloration efficiency(157.44 cm^(2)C^(-1)),outstanding cycling stability(93.7%ΔT retention after 500 cycles),and integrated energy storage functionalities(32.89 mA h m^(-2)at 0.02 mA cm^(-2)).A large,scalable 10 cm×10 cm PB//AP@Zn device showed significant faster switching times(t_(c)/tb 6.6 s/5.4 s)compared to the PB//Zn foil counterpart(t_(c)/tb 15 s/11.4 s).Importantly,we also demonstrated devices based on Nb_(18)W_(16)O_(93)(NWO)//AP@Zn,which exhibited fast switching(t_(c)/tb 18.5 s/20 s)and high durability(77.7%ΔT retention after 1200 cycles),as well as potassium vanadate(KVO)//AP@Zn featuring multicolor capabilities.Stacked PB//AP@Zn//KVO electrochromic displays exhibited a six-color palette including olive green1,tawny,bronzing,olive green2,deep blue-green,cool grayish green.This work underscores the critical role of electrode design in advancing ZECDs towards multifunctional and flexible electronics.展开更多
Cyclopentadithiophene(CPDT)-based polymers have emerged as promising research platforms for multi⁃color electrochromic materials due to their favorable color tunability.However,insufficient cyclic stability has hinder...Cyclopentadithiophene(CPDT)-based polymers have emerged as promising research platforms for multi⁃color electrochromic materials due to their favorable color tunability.However,insufficient cyclic stability has hindered their translation into practical applications.In this study,two CPDT-based conjugated polymers with distinct substituent groups were designed and synthesized:PCPDT-Ph(copolymerized with unsubstituted benzene units)and PCPDT-PhOMe(copolymerized with dimethoxy-substituted benzene units).The influence of dimethoxy substitution on the electrochromic properties and stability of the polymers was systematically investigated.Electro⁃chemical and electrochromic characterizations demonstrated that the electron-donating ability of the dimethoxy groups not only effectively regulated the polymer’s intrinsic properties but also significantly enhanced its cycling stability.Compared with PCPDT-Ph,PCPDT-PhOMe exhibited a reduced onset oxidation potential from 0.66 V(vs.Ag/AgCl)to 0.46 V,an upshifted highest occupied molecular orbital(HOMO)energy level,and a narrowed optical band gap(calculated theoretically)from 1.73 eV to 1.61 eV.The PCPDT-PhOMe film showed magenta in the neutral state and transparency in the oxidized state,with a color difference(ΔE*a b)of 46.36.The coloring/bleaching response times were measured as 0.7/0.6 s,and the optical contrast retention reached 84%after 1000 cycles,outperforming the PCPDT-Ph film(79.5%retention after 500 cycles).Additionally,it exhibited a coloration efficiency of 543.9 cm^(2)/C,demonstrating favorable comprehensive electrochromic performance.Electrochromic devices assembled with PCPDT-PhOMe achieved reversible switching between magenta and transparent states,with a response time of≤1.0 s and a contrast retention of 71%after 30000 cycles,indicating good stability.This work clarifies the role of substituent electronic effects in regulating the electrochromic properties of CPDT-based polymers,providing experimental basis and theoretical support for the molecular design of solution-processable thiophene-based electrochromic materials.Furthermore,it validates the potential application of PCPDT-PhOMe in smart windows,electronic displays,and other related fields.展开更多
Electrochromism refers to the persistent and reversible change of optical properties by an applied voltage pulse.Electrochromic(EC)devices have been extensively studied because of their commercial applications in smar...Electrochromism refers to the persistent and reversible change of optical properties by an applied voltage pulse.Electrochromic(EC)devices have been extensively studied because of their commercial applications in smart windows of green buildings,display devices and thermal control of equipments.In this review,a basic EC device design is presented based on useful oxides and solid-state electrolytes.We focus on the state-of-the-art research activities related to the structures of tungsten oxide(WO_3)and nickel oxide(NiO),summarizing the strategies to improve their EC performances and further applications of devices.展开更多
With the increasing interest in the application of electrochromism to flexible and wearable electronics in recent years,flexible electrochromic devices(ECDs)that can function at extreme temperatures are required.Howev...With the increasing interest in the application of electrochromism to flexible and wearable electronics in recent years,flexible electrochromic devices(ECDs)that can function at extreme temperatures are required.However,the functionalities of flexible ECDs are severely hampered by the inadequate choice of electrolytes,which might ultimately result in performance fading during low-and high-temperature operations.Here,we develop a deep eutectic solvent(DES)-based gel electrolyte that can maintain its optical,electrical,and mechanical properties over a wide range of temperatures(-40 to 150℃),exhibiting an extremely high visible-range transmittance over 90%,ion conductivity of 0.63 mS cm^(-1),and fracture strain exceeding 2000%.Owing to the excellent processability of the DES-based electrolytes,provided by dynamic interactions such as the lithium and hydrogen bonding between the DES and polymer matrix,a directly written patterning in ECDs is realized for the first time.The fabricated ECDs exhibit an excellent electrochromic behavior superior to the behavior of the ECDs fabricated with traditional gel electrolytes.The introduction of such DES-based electrolytes is expected to pave the way for a widespread application of electrochromic products.展开更多
Flexible electrochromic energy storage devices(FECESDs)for powering flexible electronics have attracted considerable attention.Silver nanowires(AgNWs)are one kind of the most promising flexible transparent electrodes(...Flexible electrochromic energy storage devices(FECESDs)for powering flexible electronics have attracted considerable attention.Silver nanowires(AgNWs)are one kind of the most promising flexible transparent electrodes(FTEs)materials for the emerging flexible devices.Currently,fabricating FECESD based on AgNWs FTEs is still hindered by their intrinsic poor electrochemical stability.To address this issue,a hybrid AgNWs/Co(OH)_(2)/PEDOT:PSS electrode is proposed.The PEDOT:PSS could not only improve the resistance against electrochemical corrosion of AgNWs,but also work as functional layer to realize the color-changing and energy storage properties.Moreover,the Co(OH)_(2)interlayer further improved the color-changing and energy storage performance.Based on the improvement,we assembled the symmetrical FECESDs.Under the same condition,the areal capacitance(0.8 mF cm^(−2))and coloration efficiency(269.80 cm^(2)C−1)of AgNWs/Co(OH)_(2)/PEDOT:PSS FECESDs were obviously higher than AgNWs/PEDOT:PSS FECESDs.Furthermore,the obtained FECESDs exhibited excellent stability against the mechanical deformation.The areal capacitance remained stable during 1000 times cyclic bending with a 25 mm curvature radius.These results demonstrated the broad application potential of the AgNWs/Co(OH)_(2)/PEDOT:PSS FECESD for the emerging portable and multifunctional electronics.展开更多
A star network polymer with a pentaerythritol core linking four PEG-block polymeric arms was synthesized, and its corresponding gel polymer electrolyte based on lithium perchlorate and plasticizers EC/PC with the char...A star network polymer with a pentaerythritol core linking four PEG-block polymeric arms was synthesized, and its corresponding gel polymer electrolyte based on lithium perchlorate and plasticizers EC/PC with the character being colorless and highly transparent has been also prepared. The polymer host was characterized and confirmed to be of a star network and an amorphous structure by FTIR, ^1H NMR and XRD studies. The polymer host hold good mechanical properties for pentaerythritol cross-linking. Maximum ionic conductivity of the prepared polymer electrolyte has reached 8.83 × 10 ^-4 S·cm^-1 at room temperature. Thermogravimetry （TG） of the polymer electrolyte showed that the thermal stability was up to at least 150 ℃. The gel polymer electrolyte was further evaluated in electrochromic devices fabricated by transparent PET-ITO and electrochromically active viologen derivative films, and its excellent performance promised the usage of the gel polymer electrolyte as ionic conductor material in electrochrornic devices.展开更多
The printed electronics technology can be used to efficiently construct smart devices and is dependent on functional inks containing well-dispersed active materials.Two-dimensional(2D)materials are promising functiona...The printed electronics technology can be used to efficiently construct smart devices and is dependent on functional inks containing well-dispersed active materials.Two-dimensional(2D)materials are promising functional ink candidates due to their superior properties.However,the majority 2D materials can disperse well only in organic solvents or in surfactant-assisted water solutions,which limits their applications.Herein,we report a lithium(Li)-ion exchange method to improve the dispersity of the Na_(2)W_(4)O_(13) nanosheets in pure water.The Li-ion-exchanged Na_(2)W_(4)0_(13)(Li_(x)Na_(2-x)W_(4)O_(13))nanosheets show highly stable dispersity in water with a zeta potential of-55 mV.Moreover,this aqueous ink can be sprayed on various substrates to obtain a uniform LixNa2_xW4O13 nanosheet film,exhibiting an excellent electrochromic performance.A complementary electrochromic device containing a Li_(x)Na_(2-x)W_(4)O_(13) nanosheet film as an electrochromic layer and Prussian white(PW)as an ion storage layer exhibits a large optical modulation of 75% at 700 nm,a fast switching response of less than 2 s,and outstanding cyclic stability.This Na2W4Oi3-based aqueous ink exhibits considerable potential for fabricating large-scale and flexible electrochromic devices,which would meet the practical application requirements.展开更多
Flexible electrochromic devices (FECDs) are promising candidates for the next generation of wearable electronics due to their low operating voltage and energy consumption. For the flexible electrochromic devices, the ...Flexible electrochromic devices (FECDs) are promising candidates for the next generation of wearable electronics due to their low operating voltage and energy consumption. For the flexible electrochromic devices, the electrolyte is an important component. Typically, the electrolyte needs to be formulated according to the device structure and usage scenario. A high-performance electrolyte involves consideration of many factors, including choosing the right polymer, solvent, curing agent, and ion type to satisfy particular device specifications. In this work, a ultraviolet-curable solid–liquid host–vip (UV-SLHG) electrolyte is developed. Several aspects of performance are improved by introducing the solid–liquid coexisting microstructure without changing the electrolyte formulation, including excellent adhesion, a 30% increase in tensile characteristics, and a seven-fold increase in ionic conductivity when compared to a fully cured solid-state electrolyte. More importantly, the unique advantage of SLHG electrolytes lies that the thickness will not change significantly during bending. The FECD made by using the UV-SLHG-based electrolyte sustained 10,000 bending cycles at the bending radius of 2.5 mm while maintaining outstanding optical modulation. A wearable ring-type ECD and a battery-free FECD wine label were made as demonstrators. The UV-SLHG strategy is not only suitable for the FECDs but also universally applicable to other electrolyte-based of flexible electronics such as flexible capacitors and batteries.展开更多
The choice of cathode and anode materials for electrochromic devices plays a key role in the performance of electrochromic smart windows.In this research,WO_(3)/Ag and TiO_(2)/NiO composite thin films were separately ...The choice of cathode and anode materials for electrochromic devices plays a key role in the performance of electrochromic smart windows.In this research,WO_(3)/Ag and TiO_(2)/NiO composite thin films were separately prepared by the hydrothermal method combined with electrodeposition.The electrochromic properties of the single WO_(3) thin film were optimized,and TiO_(2)/NiO composite films showed better electrochromic performance than that of the single NiO film.WO_(3)/Ag and TiO_(2)/NiO composite films with excellent electrochromic properties were respectively chosen as the cathode and the anode to construct a WO_(3)/Ag‒TiO_(2)/NiO electrochromic device.The response time(tc=4.08 s,tb=1.08 s),optical modulation range(35.91%),and coloration efficiency(30.37 cm^(2)·C^(-1))of this electrochromic device are better than those of WO_(3)-NiO and WO_(3)/Ag-NiO electrochromic devices.This work provides a novel research idea for the performance enhancement of electrochromic smart windows.展开更多
The energy consumption in building ventilation,air,and heating conditioning systems,accounts for about 25%of the overall energy consumption in modern society.Therefore,cutting carbon emissions and reducing energy cons...The energy consumption in building ventilation,air,and heating conditioning systems,accounts for about 25%of the overall energy consumption in modern society.Therefore,cutting carbon emissions and reducing energy consumption is a growing priority in building construction.Electrochromic devices(ECDs)are considered to be a highly promising energy-saving technology,due to their simple structure,active control,and low energy input characteristics.At present,Hþ,OH-and Liþare the main electrolyte ions used for ECDs.However,Hþand OH-based electrolytes have a high erosive effect on the material surface and have a relatively short lifetime.Liþ-based electrolytes are limited due to their high cost and safety concerns.In this study,inspired by prior research on Ca^(2+)þbatteries and supercapacitors,CaF_(2)films were prepared by electron beam evaporation as a Ca^(2+)þ-based electrolyte layer to construct ECDs.The structure,morphology,and optical properties of CaF_(2)films were characterized.ECDs with the structure of ITO(indium tin oxide)glass/WO3/CaF_(2)/NiO/ITO show short switching times(22.8 s for the coloring process,2.8 s for the bleaching process).Additionally,optical modulation of the ECDs is about 38.8%at 750 nm.These findings indicate that Ca^(2+)þbased ECDs have the potential to become a competitive and attractive choice for large-scale commercial smart windows.展开更多
基金Funded by the Natural Science Foundation of Guangdong(Nos.2014A030313241,2014B090901068,and 2016A010103003)。
文摘Two viologen derivatives containing fluorine substituent(F)with an asymmetric structures,1,1'-bis(4-(trifluoromethyl)phenyl)-[4,4'-bipyridine]dihexafluorophosphate(DFPV)and 1-benzyl-1'-(4-(trifluoromethyl)phenyl)-[4,4'-bipyridine]di-hexafluorophosphate(Bn-FPV),were synthesized.These viologen derivatives as active materials were used to assemble both flexible and rigid electrochromic devices(ECDs).ECDs based on DFPV exhibited reversible color change from colorless to deep green and ECDs based on Bn-FPV exhibited reversible color change from colorless to blue-green within applied voltage.It was found that the devices based on DFPV showed cycle stability,which could still maintain more than 90% after 1000 cycles.In addition,the modulation rate of the device to the solar irradiance is also calculated to characterize its application potential in smart windows.Among them,the rigid device(R-DFPV)based on the DFPV has a large solar irradiance modulation rate of 54.66%,which has the potential to be used as smart windows.
基金support from the National Natural Science Foundation of China(Grant No.62105148)China Postdoctoral Science Foundation(2022TQ0148 and 2023M731651)Postgraduate Research&Practice Innovation Program of NUAA(xcxjh20230609).
文摘Dual-band electrochromic devices capable of the spectral-selective modulation of visible(VIS)light and near-infrared(NIR)can notably reduce the energy consumption of buildings and improve the occupants’visual and thermal comfort.However,the low optical modulation and poor durability of these devices severely limit its practical applications.Herein,we demonstrate an efficient and flexible bifunctional dual-band electrochromic device which not only shows excellent spectral-selective electrochromic performance with a high optical modulation and a long cycle life,but also displays a high capacitance and a high energy recycling efficiency of 51.4%,integrating energy-saving with energy-storage.The nanowires structure and abundant oxygen-vacancies of oxygen-deficient tungsten oxide nanowires endows it high flexibility and a high optical modulation of 73.1%and 85.3%at 633 and 1200 nm respectively.The prototype device assembled can modulate the VIS light and NIR independently and effectively through three distinct modes with a long cycle life(3.3%capacity loss after 10,000 cycles)and a high energy-saving performance(8.8℃lower than the common glass).Furthermore,simulations also demonstrate that our device outperforms the commercial low-emissivity glass in terms of energy-saving in most climatic zones around the world.Such windows represent an intriguing potential technology to improve the building energy efficiency.
基金supported by the Natural Science Foundation of Jiangxi Province(20232ACB204002&20232BAB202044)Jiangxi Provincial Key Laboratory of Flexible Electronics(20212BCD42004&20242BCC32010).
文摘Flexible electrochromic devices(FECDs)demonstrate significant potential for applications in wearable elec-tronics,military camouflage,and flexible smart displays.As a crucial electrochromic material,poly(3,4-ethylenedioxythiophene):polystyrene sulfonate(PEDOT:PSS)is widely used in FECDs due to its excellent mechanical flexibility,tunable conductivity,and non-toxicity.However,the manufacturing process for patterned PEDOT:PSS electrochromic devices remains intricate,costly,and challenging to personalize.To address this challenge,we have developed a 3D-printable ink with controllable rheological properties through a concentration-tuning strategy,enabling programmable,patterned printing of PEDOT-based conductive polymer electrochromic layers.The 3D-printed FECDs exhibit outstanding electrochromic performance,including a high optical contrast(up to 47.9%at 635 nm),fast response times(t_(c)=1.6 s;t_(b)=0.6 s),high coloration efficiency(352 cm^(2) C^(-1)),and good cycling stability(with only a 9.3%decrease in optical contrast after 100 electrochemical cycles).Finally,we utilize 3D printing technology to construct flexible,patterned PEDOT:PSS electrochromic devices with bespoke butterfly designs.This work establishes the theoretical foundation for the application of 3D printing technology in PEDOT:PSS flexible electrochromic devices.
文摘In this study,novel electrochromic copolymers of 3,4-ethylenedioxythiophene(EDOT)and(E)-1,2-bis(2-fluoro-4-(4-hexylthiophen-2-yl)phenyl)diazene(M1)with different monomer feed ratios were designed and synthesized electrochemically.Electrochemical and spectroelectrochemical characterizations were performed using voltammetry and UV-Vis-NIR spectrophotometry techniques to test the applicability of copolymers for electrochromic applications.In terms of electrochemical behaviors,addition of an electron-rich EDOT unit into the azobenzenecontaining copolymer increased the electron density on the polymer chain and afforded copolymers with very low oxidation potentials at around0.30 V.While the homopolymers(P1 and PEDOT)exhibited neutral state absorptions centered at 510 and 583 nm,EDOT-bearing copolymers showed red shifted absorptions compared to those of P1 with narrower optical band gaps.In addition,the poor optical contrast and switching times of azobenzene-bearing homopolymer were significantly improved with EDOT addition into the copolymer chain.As a result of the promising electrochromic and kinetic preperties,Co P1.5-bearing single layer electrochromic device that works between purple and light greenish blue colors was constructed and characterized.
基金the support from the “Qilu Young Scholar” program (62460082163097) of Shandong Universitythe National Natural Science Foundation of China (62105185)+1 种基金Shandong Excellent Young Scientists Fund Program (Overseas) (2022HWYQ-021)Guangdong Basic and Applied Basic Research Foundation (2022A1515011516)
文摘Electrochromic materials are capable of reversibly switching their colors or optical properties through redox reactions under applied voltages,which have shown great potential applications including smart windows,nonemissive displays,optical filters,among others.Although the current rigid electrochromic devices have shown emerging interest and developed rapidly,many applications(e.g.,wearable/deformable optoelectronics)are blocked due to their inflexible features.Herein,the adaption of rigid electrochromic devices to flexible ones is of particular interest for the new era of smart optoelectronics.In this review,the current state-of-the-art achievements of flexible electrochromic devices(FECDs)are highlighted,along with their design strategies and the choice of electrochromic materials.The recent research progress of FECDs is reviewed in detail,and the challenges and corresponding solutions for real-world applications of FECDs are discussed.Furthermore,we summarize the basic fabrication strategies of FECDs and their potential applications.In addition,the development trend,the perspectives,and the outlook of FECDs are discussed at the end of this Review,which may provide recommendations and potential directions to advance the practical applications of FECDs.
基金financially supported by the National Natural Science Foundation of China(Nos.51010005,91216123 and 51174063)Natural Science Funds for Distinguished Young Scholar of Heilongjiang Provincethe project of International Cooperation supported by Ministry of Science and Technology of China(2013DFR10630)
文摘Electroactive conducting copolymers of aniline （ANI） and diphenylamine （DPA） are prepared on indium tin oxide （ITO） surface from 1 mol/L H2SO4 aqueous solution with different feed ratios of ANI to DPA by using a potentiostatic method. FTIR spectra and SEM measurements are used to confirm the formation of copolymers. Due to the combination of the N,N＇-diphenyl benzidine and aniline units in the molecular chain, the copolymer films exhibit improved electrochemical and electrochromic properties, compared to PANI and PDPA. The copolymer [marked as P（ANI9-co-DPA1）] film prepared at a ratio of 9：1 （ANI/DPA） exhibits novel transmittance modulation both in visible and near-infrared （NIR） region between -0.8 V and 0.8 V （52% and 67% respectively） and fast response time （3.6 s for coloration and 2.3 s for bleaching at 600 nm）. An electrochromic device （ECD） based on P（ANI9-co-DPA1） and PEDOT：PSS is also fabricated and shows a multicolor electrochromic performance, with a good optical contrast （29% in visible region and 40% in NIR region）, acceptable response time （8.3 s for coloration and 7.5 s for bleaching at 600 nm） and long-term stability. Clear color changes from transparent （-0.8 V）, bright green （0 V）, seagreen （0.4 V） to dark slate gray （0.8 V） are demonstrated.
基金financial support from the National Natural Science Foundation of China(22105106)the Natural Science Foundation of Jiangsu Province of China(BK20210603)+1 种基金the Nanjing Science and Technology Innovation Project for overseas Students(NJKCZYZZ2022–05)the Start-up Funding from NUPTSF(NY221003)。
文摘Electrochromic technology has gained significant attention in various fields such as displays,smart windows,biomedical monitoring,military camouflage,human-machine interaction,and electronic skin due to its ability to provide reversible and fast color changes under applied voltage.With the rapid development and increasing demand for flexible electronics,flexible electrochromic devices(FECDs)that offer smarter and more controllable light modulation hold great promise for practical applications.The electrochromic material(ECM)undergoing color changes during the electrochemical reactions is one of the key components in electrochromic devices.Among the ECMs,viologens,a family of organic small molecules with 1,1'-disubstituted-4,4'-dipyridinium salts,have garnered extensive research interest,due to their well-reversible redox reactions,excellent electron acceptance ability,and the ability to produce multiple colors.Notably,viologen-based FECDs demonstrate color changes in the liquid or semisolid electrolyte layer,eliminating the need for two solid electrodes and thus simplifying the device structure.Consequently,viologens offer significant potential for the development of FECDs with high optical contrast,fast response speed,and excellent stability.This review aims to provide a comprehensive overview of the progress and perspectives of viologen-based FECDs.It begins by summarizing the typical structure and recent exciting developments in viologen-based FECDs,along with their advantages and disadvantages.Furthermore,the review discusses recent advancements in FECDs with additional functionalities such as sensing,photochromism,and energy storage.Finally,the remaining challenges and potential research directions for the future of viologen-based FECDs are addressed.
文摘An amorphous,colorless,and highly transparent star network polymer with a pentaerythritol core linking four PEG-block polymeric arms was synthesized from the poly(ethylene glycol)(PEG),pentaerythritol,and dichloromethane by Williamson reaction.FTIR and ~1H-NMR measurement demonstrated that the polymer repeating units were C[CH_2-OCH_2O-(CH_2CH_2O)_m-CH_2O-(CH_2CH_2O)_n-CH_2O]_4.The polymer host held well mechanical properties for pentaerythritol cross-linking.The gel polymer electrolytes based on Lithium pe...
基金funding from the Natural Science Foundation of Jiangsu Province(BK20210480)the grant from National Innovation Center of Advanced Dyeing&Finishing Technology(2022GCJJ08).
文摘Zn anode-based electrochromic devices(ZECDs)stand out as a highly promising technology in the upcoming era of multifunctional electronic devices,offering a blend of electrochromic capabilities and energy storage functions within a single transparent platform.However,significant challenges persist in achieving efficient patterning,ensuring long-term stability,and fast color-switching kinetics for these devices.In this study,heterogeneous tungsten oxide nanowires(W_(17)O_(47)/Na_(0.1)WO_(3),WNOs)are formulated into inkjet printing ink to assemble patternable ZECDs.The heterogeneous electrode structure of WNO enables a highly capacitive-controlled mechanism that promotes fast electrochromic/electrochemical behavior.Notably,by utilizing a three-dimensional MXene mesh modified substrate,the inkjet-printed ZECDs exhibit a wide optical modulation range of 69.13%,rapid color-changing kinetics(t_(c)=4.1 s,t_(b)=5.4 s),and highly reversible capacities of 70 mAh cm^(-2)over 1000 cycles.This scalable strategy develops the patterned electrodes with a wide optical modulation range and substantial energy storage properties,offering promising prospects for their application in next-generation smart electronics.
基金supported by the National Natural Science Foundation of China(52103299)。
文摘With the global push for energy conservation and the rapid development of low-power,flexible and wearable optical displays,the demand for electrochromic technology has surged.Gel polymer electrolytes(GPEs),a crucial component of electrochromic devices(ECDs),show great promise in applications.This is attributed to their efficient ion-transport capabilities,excellent mechanical properties and strong adhesion.All of these characteristics are conducive to enhancing the safety of the devices,streamlining the packaging process,significantly improving the electrochromic performance of ECDs and boosting their commercial application potential.This review provides a comprehensive overview of GPEs for ECDs,focusing on their basic designs,functional modifications and practical applications.Firstly,this review outlines the fundamental design of GPEs for ECDs,encompassing key performance index,classification,gelation mechanism and preparation methods.Building on this foundation,it provides an in-depth discussion of functionalized GPEs developed to enhance device performance or expand functionality,including electrochromic,temperature-responsive,photo-responsive and stretchable self-healing GPE.Furthermore,the integration of GPEs into various ECD applications,including smart windows,displays,energy storage devices and wearable electronic,are summarized to highlight the advantages that the design of GPEs brings to the practical application of ECDs.Finally,based on the summary of GPEs employed for ECDs,the challenges and development expectations in this direction were indicated.
基金the National Natural Science Foundation of China(5257021138,52202320)National Natural Science Foundation of China-China Academy of Engineering Physics“NSAF”Joint Fund(U2230101)+3 种基金the National Natural Science Fund for Excellent Young Scientists Fund(Overseas)Program(GG2090007003)Shandong Excellent Young Scientists Fund(Overseas)Program(2023HWYQ-060)the Fundamental Research Funds for the Central Universities(WK2490000002)the Joint Research Center for Multi-Energy Complementation and Conversion.
文摘Zinc anode-based electrochromic devices(ZECDs)represent a new generation of multifunctional electrochromic(EC)platforms,offering cost-effectiveness and high roundtrip efficiency.However,their practical application remains limited due to the electric field inhomogeneity and the growth of Zn dendrites issues primarily caused by the use of opaque peripheral Zinc(Zn)foils.Herein,we rationally designed a transparent(T=71.4%@633 nm),durable and flexible Ag-PVDF(polyvinylidene difluoride)coated Zinc(AP@Zn)mesh electrode.The AP@Zn mesh promotes a homogeneous electric field and potential distribution within ZECDs,exhibits excellent corrosion resistance,and possesses a low activation energy(47.59 kJ mol^(-1)).Furthermore,it demonstrates broad compatibility with various EC electrodes.As a result,a 5 cm×5 cm Prussian blue(PB)//AP@Zn achieved fast switching times(t_(c)/tb 2.8 s/2.6 s),high coloration efficiency(157.44 cm^(2)C^(-1)),outstanding cycling stability(93.7%ΔT retention after 500 cycles),and integrated energy storage functionalities(32.89 mA h m^(-2)at 0.02 mA cm^(-2)).A large,scalable 10 cm×10 cm PB//AP@Zn device showed significant faster switching times(t_(c)/tb 6.6 s/5.4 s)compared to the PB//Zn foil counterpart(t_(c)/tb 15 s/11.4 s).Importantly,we also demonstrated devices based on Nb_(18)W_(16)O_(93)(NWO)//AP@Zn,which exhibited fast switching(t_(c)/tb 18.5 s/20 s)and high durability(77.7%ΔT retention after 1200 cycles),as well as potassium vanadate(KVO)//AP@Zn featuring multicolor capabilities.Stacked PB//AP@Zn//KVO electrochromic displays exhibited a six-color palette including olive green1,tawny,bronzing,olive green2,deep blue-green,cool grayish green.This work underscores the critical role of electrode design in advancing ZECDs towards multifunctional and flexible electronics.
基金Supported by the National Natural Science Foundation of China(No.52103232)the Natural Science Foundation of Zhejiang Province,China(Nos.LY24E030012,LY19E030006)。
文摘Cyclopentadithiophene(CPDT)-based polymers have emerged as promising research platforms for multi⁃color electrochromic materials due to their favorable color tunability.However,insufficient cyclic stability has hindered their translation into practical applications.In this study,two CPDT-based conjugated polymers with distinct substituent groups were designed and synthesized:PCPDT-Ph(copolymerized with unsubstituted benzene units)and PCPDT-PhOMe(copolymerized with dimethoxy-substituted benzene units).The influence of dimethoxy substitution on the electrochromic properties and stability of the polymers was systematically investigated.Electro⁃chemical and electrochromic characterizations demonstrated that the electron-donating ability of the dimethoxy groups not only effectively regulated the polymer’s intrinsic properties but also significantly enhanced its cycling stability.Compared with PCPDT-Ph,PCPDT-PhOMe exhibited a reduced onset oxidation potential from 0.66 V(vs.Ag/AgCl)to 0.46 V,an upshifted highest occupied molecular orbital(HOMO)energy level,and a narrowed optical band gap(calculated theoretically)from 1.73 eV to 1.61 eV.The PCPDT-PhOMe film showed magenta in the neutral state and transparency in the oxidized state,with a color difference(ΔE*a b)of 46.36.The coloring/bleaching response times were measured as 0.7/0.6 s,and the optical contrast retention reached 84%after 1000 cycles,outperforming the PCPDT-Ph film(79.5%retention after 500 cycles).Additionally,it exhibited a coloration efficiency of 543.9 cm^(2)/C,demonstrating favorable comprehensive electrochromic performance.Electrochromic devices assembled with PCPDT-PhOMe achieved reversible switching between magenta and transparent states,with a response time of≤1.0 s and a contrast retention of 71%after 30000 cycles,indicating good stability.This work clarifies the role of substituent electronic effects in regulating the electrochromic properties of CPDT-based polymers,providing experimental basis and theoretical support for the molecular design of solution-processable thiophene-based electrochromic materials.Furthermore,it validates the potential application of PCPDT-PhOMe in smart windows,electronic displays,and other related fields.
基金Program for Innovative Research Team in University of Ministry of Education of China (IRT13037)
文摘Electrochromism refers to the persistent and reversible change of optical properties by an applied voltage pulse.Electrochromic(EC)devices have been extensively studied because of their commercial applications in smart windows of green buildings,display devices and thermal control of equipments.In this review,a basic EC device design is presented based on useful oxides and solid-state electrolytes.We focus on the state-of-the-art research activities related to the structures of tungsten oxide(WO_3)and nickel oxide(NiO),summarizing the strategies to improve their EC performances and further applications of devices.
基金External Cooperation Program of the Chinese Academy of Sciences,Grant/Award Number:121E32KYSB20190008National Natural Science Foundation of China,Grant/Award Numbers:22175198,51972331,52172299+3 种基金Outstanding Youth Fund of Jiangxi,Grant/Award Number:20192BCBL23027Six Talent Peaks Project in Jiangsu Province,Grant/Award Number:XCL-170the National Key Research and Development Program of China,Grant/Award Number:2020YFB1505703Youth Innovation Promotion Association of the Chinese Academy of Sciences,Grant/Award Number:2018356.
文摘With the increasing interest in the application of electrochromism to flexible and wearable electronics in recent years,flexible electrochromic devices(ECDs)that can function at extreme temperatures are required.However,the functionalities of flexible ECDs are severely hampered by the inadequate choice of electrolytes,which might ultimately result in performance fading during low-and high-temperature operations.Here,we develop a deep eutectic solvent(DES)-based gel electrolyte that can maintain its optical,electrical,and mechanical properties over a wide range of temperatures(-40 to 150℃),exhibiting an extremely high visible-range transmittance over 90%,ion conductivity of 0.63 mS cm^(-1),and fracture strain exceeding 2000%.Owing to the excellent processability of the DES-based electrolytes,provided by dynamic interactions such as the lithium and hydrogen bonding between the DES and polymer matrix,a directly written patterning in ECDs is realized for the first time.The fabricated ECDs exhibit an excellent electrochromic behavior superior to the behavior of the ECDs fabricated with traditional gel electrolytes.The introduction of such DES-based electrolytes is expected to pave the way for a widespread application of electrochromic products.
基金supports from the National Natural Science Foundation of China (Grant No. 52175300)Fundamental Research Funds for the Central Universities (2022FRFK060008)+2 种基金Heilongjiang Touyan Innovation Team Program (HITTY-20190013)Shenzhen Fundamental Research Programs (JCYJ20200925160843002)Start-up fund of SUSTech (Y01256114)
文摘Flexible electrochromic energy storage devices(FECESDs)for powering flexible electronics have attracted considerable attention.Silver nanowires(AgNWs)are one kind of the most promising flexible transparent electrodes(FTEs)materials for the emerging flexible devices.Currently,fabricating FECESD based on AgNWs FTEs is still hindered by their intrinsic poor electrochemical stability.To address this issue,a hybrid AgNWs/Co(OH)_(2)/PEDOT:PSS electrode is proposed.The PEDOT:PSS could not only improve the resistance against electrochemical corrosion of AgNWs,but also work as functional layer to realize the color-changing and energy storage properties.Moreover,the Co(OH)_(2)interlayer further improved the color-changing and energy storage performance.Based on the improvement,we assembled the symmetrical FECESDs.Under the same condition,the areal capacitance(0.8 mF cm^(−2))and coloration efficiency(269.80 cm^(2)C−1)of AgNWs/Co(OH)_(2)/PEDOT:PSS FECESDs were obviously higher than AgNWs/PEDOT:PSS FECESDs.Furthermore,the obtained FECESDs exhibited excellent stability against the mechanical deformation.The areal capacitance remained stable during 1000 times cyclic bending with a 25 mm curvature radius.These results demonstrated the broad application potential of the AgNWs/Co(OH)_(2)/PEDOT:PSS FECESD for the emerging portable and multifunctional electronics.
文摘A star network polymer with a pentaerythritol core linking four PEG-block polymeric arms was synthesized, and its corresponding gel polymer electrolyte based on lithium perchlorate and plasticizers EC/PC with the character being colorless and highly transparent has been also prepared. The polymer host was characterized and confirmed to be of a star network and an amorphous structure by FTIR, ^1H NMR and XRD studies. The polymer host hold good mechanical properties for pentaerythritol cross-linking. Maximum ionic conductivity of the prepared polymer electrolyte has reached 8.83 × 10 ^-4 S·cm^-1 at room temperature. Thermogravimetry （TG） of the polymer electrolyte showed that the thermal stability was up to at least 150 ℃. The gel polymer electrolyte was further evaluated in electrochromic devices fabricated by transparent PET-ITO and electrochromically active viologen derivative films, and its excellent performance promised the usage of the gel polymer electrolyte as ionic conductor material in electrochrornic devices.
基金This work was financially supported by the National Natural Science Foundation of China(Grant Nos.11874036,51872101,51672097,51972124,and 51902115)the National Program for Support of Top-notch Young Professionals,the Program for HUST Academic Frontier Youth Team,the Fundamental Research Funds for the Central Universities(HUST:2017KFXKJC001 and 2018KFYXKJC025)+2 种基金the Guangdong Province Key Area R&D Program(No.2019B010940001)the Local Innovative and Research Teams Project of Guangdong Pearl River Talents Program(No.2017BT01N111)Basic Research Project of Shenzhen,China(No.JCYJ20170412171430026).
文摘The printed electronics technology can be used to efficiently construct smart devices and is dependent on functional inks containing well-dispersed active materials.Two-dimensional(2D)materials are promising functional ink candidates due to their superior properties.However,the majority 2D materials can disperse well only in organic solvents or in surfactant-assisted water solutions,which limits their applications.Herein,we report a lithium(Li)-ion exchange method to improve the dispersity of the Na_(2)W_(4)O_(13) nanosheets in pure water.The Li-ion-exchanged Na_(2)W_(4)0_(13)(Li_(x)Na_(2-x)W_(4)O_(13))nanosheets show highly stable dispersity in water with a zeta potential of-55 mV.Moreover,this aqueous ink can be sprayed on various substrates to obtain a uniform LixNa2_xW4O13 nanosheet film,exhibiting an excellent electrochromic performance.A complementary electrochromic device containing a Li_(x)Na_(2-x)W_(4)O_(13) nanosheet film as an electrochromic layer and Prussian white(PW)as an ion storage layer exhibits a large optical modulation of 75% at 700 nm,a fast switching response of less than 2 s,and outstanding cyclic stability.This Na2W4Oi3-based aqueous ink exhibits considerable potential for fabricating large-scale and flexible electrochromic devices,which would meet the practical application requirements.
基金supported by the NSFC(No.22002051)Jiangsu Provincial Double-Innovation Doctor Program(No.JSSCBS20210931)+4 种基金the Innovation/Entrepreneurship Program of Jiangsu Province(No.JSSCTD202146)China Postdoctoral Science Fund(No.2021M701484)Jiangsu Postdoctoral Fund(No.2021K251B)QD-NLED device structure optimization and electroluminescence mechanism research project(No.2022YFB3606503)Jiangsu Funding Program for Excellent Postdoctoral Talent.The authors are grateful for the technical support for Nano-X from Suzhou Institute of Nano-Tech and NanoBionics,Chinese Academy of Sciences(SINANO).
文摘Flexible electrochromic devices (FECDs) are promising candidates for the next generation of wearable electronics due to their low operating voltage and energy consumption. For the flexible electrochromic devices, the electrolyte is an important component. Typically, the electrolyte needs to be formulated according to the device structure and usage scenario. A high-performance electrolyte involves consideration of many factors, including choosing the right polymer, solvent, curing agent, and ion type to satisfy particular device specifications. In this work, a ultraviolet-curable solid–liquid host–vip (UV-SLHG) electrolyte is developed. Several aspects of performance are improved by introducing the solid–liquid coexisting microstructure without changing the electrolyte formulation, including excellent adhesion, a 30% increase in tensile characteristics, and a seven-fold increase in ionic conductivity when compared to a fully cured solid-state electrolyte. More importantly, the unique advantage of SLHG electrolytes lies that the thickness will not change significantly during bending. The FECD made by using the UV-SLHG-based electrolyte sustained 10,000 bending cycles at the bending radius of 2.5 mm while maintaining outstanding optical modulation. A wearable ring-type ECD and a battery-free FECD wine label were made as demonstrators. The UV-SLHG strategy is not only suitable for the FECDs but also universally applicable to other electrolyte-based of flexible electronics such as flexible capacitors and batteries.
基金supported by the Natural Science Foundation of Chongqing City(Grant Nos.CSTB2022NSCQ-MSX0751 and cstc2021jcyj-msxmX0500)the Education Department Project of Jilin Province(Grant No.JJKH20220726KJ)+1 种基金the Science and Technology Department Project of Jilin Province(Grant No.20200201077JC)the National Natural Science Foundation of China(Grant No.U2141239).
文摘The choice of cathode and anode materials for electrochromic devices plays a key role in the performance of electrochromic smart windows.In this research,WO_(3)/Ag and TiO_(2)/NiO composite thin films were separately prepared by the hydrothermal method combined with electrodeposition.The electrochromic properties of the single WO_(3) thin film were optimized,and TiO_(2)/NiO composite films showed better electrochromic performance than that of the single NiO film.WO_(3)/Ag and TiO_(2)/NiO composite films with excellent electrochromic properties were respectively chosen as the cathode and the anode to construct a WO_(3)/Ag‒TiO_(2)/NiO electrochromic device.The response time(tc=4.08 s,tb=1.08 s),optical modulation range(35.91%),and coloration efficiency(30.37 cm^(2)·C^(-1))of this electrochromic device are better than those of WO_(3)-NiO and WO_(3)/Ag-NiO electrochromic devices.This work provides a novel research idea for the performance enhancement of electrochromic smart windows.
基金National Natural Science Foundation of China,China(52002097)。
文摘The energy consumption in building ventilation,air,and heating conditioning systems,accounts for about 25%of the overall energy consumption in modern society.Therefore,cutting carbon emissions and reducing energy consumption is a growing priority in building construction.Electrochromic devices(ECDs)are considered to be a highly promising energy-saving technology,due to their simple structure,active control,and low energy input characteristics.At present,Hþ,OH-and Liþare the main electrolyte ions used for ECDs.However,Hþand OH-based electrolytes have a high erosive effect on the material surface and have a relatively short lifetime.Liþ-based electrolytes are limited due to their high cost and safety concerns.In this study,inspired by prior research on Ca^(2+)þbatteries and supercapacitors,CaF_(2)films were prepared by electron beam evaporation as a Ca^(2+)þ-based electrolyte layer to construct ECDs.The structure,morphology,and optical properties of CaF_(2)films were characterized.ECDs with the structure of ITO(indium tin oxide)glass/WO3/CaF_(2)/NiO/ITO show short switching times(22.8 s for the coloring process,2.8 s for the bleaching process).Additionally,optical modulation of the ECDs is about 38.8%at 750 nm.These findings indicate that Ca^(2+)þbased ECDs have the potential to become a competitive and attractive choice for large-scale commercial smart windows.
