Both citrate and hypophosphite in aqueous solution were degraded by advanced oxidation processes （Fe^2＋/H2O2, UV/Fe^2＋/H2O2, and electrolysis/Fe^2＋/H2O2） in this study. Comparison of these techniques in oxidation...Both citrate and hypophosphite in aqueous solution were degraded by advanced oxidation processes （Fe^2＋/H2O2, UV/Fe^2＋/H2O2, and electrolysis/Fe^2＋/H2O2） in this study. Comparison of these techniques in oxidation efficiency was undertaken. It was found that Fenton process could not completely degrade citrate in the presence of hypophosphite since it caused a series inhibition. Therefore, UV light （photo-Fenton） or electron current （electro-Fenton） was applied to improve the degradation efficiency of the Fenton process. Results showed that both photo-Fenton and electro-Fenton processes could overcome the inhibition of hypophosphite, especially the electro-Fenton.展开更多
As a novel advanced oxidation process (AOP), electro-Fenton process is powerful for degrading most organic compounds including toxic and non-biodegradable ones, and so has attracted great attention. This paper reviews...As a novel advanced oxidation process (AOP), electro-Fenton process is powerful for degrading most organic compounds including toxic and non-biodegradable ones, and so has attracted great attention. This paper reviews this process in detail including the mechanism, electrolytic bath, electrode materials, aerations and operation parameters. The application of electro-Fenton method in wastewater treatment is evaluated and summarized. Future work in this field is suggested, and three main directions of new electrode exploitation, development of assisted technologies and mechanistic study should be strengthened.展开更多
Electrochemical advanced oxidation processes (EAOPs) are effective and environmentally friendly for the treatment of refractory organic pollutants.Among EAOPs,heterogeneous electro-Fenton (EF) process with in-situ for...Electrochemical advanced oxidation processes (EAOPs) are effective and environmentally friendly for the treatment of refractory organic pollutants.Among EAOPs,heterogeneous electro-Fenton (EF) process with in-situ formation of hydrogen peroxide (H_(2)O_(2)) is an eco-friendly,cost-effective and easy-operable technology to generate hydroxyl radicals (;OH) with high redox potential.The generation of;OH is determined by the synergistic H_(2)O_(2)formation and activation.The surface catalytic mechanisms for H_(2)O_(2)activation in the heterogeneous EF process were discussed.Some required features such as heteroatom doping and oxygen groups for H_(2)O_(2)formation via selective two-electron oxygen reduction reaction (ORR) with carbonaceous electrode are summarized.The solid Fenton catalysts and integrated functional cathodes that widely used in heterogeneous EF for wastewater treatment are grouped into few classes.And the brief discussion on catalytic activity and stability of materials over different experimental conditions are given.In addition,the application of heterogeneous EF process on the remediation of emerging contaminants is provided.The challenges and future prospects of the heterogeneous EF processes about catalytic fall-off and multi-step/complex techniques for water purification are emphasized.展开更多
This study reports the removal of amoxicillin(AMX)in aqueous media using the electroFenton process in the presence of a graphite cathode recovered from used batteries.The impact of the relevant parameters on the elect...This study reports the removal of amoxicillin(AMX)in aqueous media using the electroFenton process in the presence of a graphite cathode recovered from used batteries.The impact of the relevant parameters on the electroFenton process,namely the applied current intensity,the temperature,the initial concentration of AMX and the initial concentration of ferrous ions were investigated.The results showed that the optimal values were:I=600 mA,T=25℃,[AMX]_(0)=0.082 mmol·L^( 1) and[Fe^(2+)]=1 mmol·L^(1),leading to 95%degradation and 74%mineralization.The model parameters of AMX mineralization were determined using nonlinear methods,showing that it follows a pseudosecondorder kinetic.The Energy consumption(EC)calculated under the optimal values was found to be 0.79 kWhg 1,which was of the same order of magnitude of those reported in other findings;while it is noteworthy that the electrodes used in our study are of a lower cost.展开更多
The Electro-Fenton(EF)process is one of the promising advanced oxidation processes(AOPs)for environmental remediation.The H_(2)O_(2) yield of EF process largely determines its performance on organic pollutants degrada...The Electro-Fenton(EF)process is one of the promising advanced oxidation processes(AOPs)for environmental remediation.The H_(2)O_(2) yield of EF process largely determines its performance on organic pollutants degradation.Conventional Pd-catalytic EF process generates H_(2)O_(2) via the combination reaction of anodic O_(2) and cathodic H;.However,the relatively expensive catalyst limits its application.Herein,a hybrid Pd/activated carbon(Pd/AC)-stainless steel mesh(SS)cathode(PACSS)was proposed,which enables more efficie nt H_(2)O_(2)generation.It utilizes AC,the support of Pd catalyst,as part of cathode for H_(2)O_(2) generation via 2-electron anodic O_(2) reduction,and SS serve as a current distributor.Moreover,H_(2)O_(2) could be catalytically decomposed upon AC to generate highly reactive·OH,which avoids the use of Fe;.Compared with conventional Pd catalyst,H_(2)O_(2) concentration obtained by PACSS cathode is248.2%higher,the O_(2)utilization efficiency was also increased from 3.2%to 10.8%.Within 50 min,26.3%,72.5%,and 94.0%H_(2)O_(2) was decomposed by Pd,AC,and Pd/AC.Fluorescence detection results implied that Pd/AC is effective upon H_(2)O_(2) activation for·OH generation.Finally,iron-free EF process enabled by PACSS cathode was examined to be effective for reactive blue 19(RB19)degradation.After continuous running for 10 cycles(500 min),the PACSS cathode was still stable for H_(2)O_(2)generation,H_(2)O_(2)activation,and RB19 degradation,showing its potential application for organic pollutants degradation without increase in the running cost.展开更多
Atomically dispersed single-atom catalysts(SACs)on carbon supports show great promise for H_(2)O_(2) electrosynthesis,but conventional wet chemistry methods using particulate carbon blacks in powder form have limited ...Atomically dispersed single-atom catalysts(SACs)on carbon supports show great promise for H_(2)O_(2) electrosynthesis,but conventional wet chemistry methods using particulate carbon blacks in powder form have limited their potential as two-electron(2^(e−))oxygen reduction reaction(ORR)catalysts.Here,we demonstrate high-performance Co SACs supported on a free-standing aligned carbon nanofiber(CNF)using electrospinning and arc plasma deposition(APD).Based on the surface oxidation treatment of aligned CNF and precise control of the deposition amount in a dry-based APD process,we successfully form densely populated Co SACs on aligned CNF.Through experimental analyses and density functional theory calculations,we reveal that Co SAC has a Co–N_(2)–O_(2) moiety with one epoxy group,leading to excellent 2^(e−)ORR activity.Furthermore,the aligned CNF significantly improves mass transfer in flow cells compared to randomly oriented CNF,showing an overpotential reduction of 30 mV and a 1.3-fold improvement(84.5%)in Faradaic efficiency,and finally achieves an outstanding production rate of 15.75 mol gcat^(−1) h^(−1) at 300 mA cm^(−2).The high-performance Co SAC supported on well-aligned CNF is also applied in an electro-Fenton process,demonstrating rapid removal of methylene blue and bisphenol F due to its exceptional 2e^(−)ORR activity.展开更多
The Electrochemical advanced oxidation method “Electro-Fenton” has been applied to remove 17β-estradiol (17β)- estra-1,3,5(10)-triéne-3,17-diol) in aqueous-acetonitrile mixture. This endocrine disrupting is a...The Electrochemical advanced oxidation method “Electro-Fenton” has been applied to remove 17β-estradiol (17β)- estra-1,3,5(10)-triéne-3,17-diol) in aqueous-acetonitrile mixture. This endocrine disrupting is a steroid hormone, releases from humans, animals and residual pharmaceuticals into the environmental water and usually causes suspected undesirable effects in aquatic organisms. The degradation of this organic compound by Electro-Fenton process was showed using a carbon felt cathode and platinum anode. The evolution of the concentration during treatment was followed up by high performance liquid chromatography (HPLC). The influence of operating conditions on the degradation of 17β-estradiol by Electro-Fenton step, such as initial concentration and catalyst concentration, has been investi- gated and discussed. We showed that the degradation reaction obeyed apparent first-order reaction kinetics, with absolute rate constant determined as 5.12 × 109 M–1 s–1 by competitive kinetics method taking Benzoic Acid as reference compound. The results confirm the efficiency of the Electro-Fenton process to degrade organic pollutant in aqueous-acetonitrile mixture.展开更多
一、作为哲学的AI for Process(一)郭为的哲学思想1.郭为是谁郭为是谁?他是一位哲学家。顺便说,他同时还领导着神州数码。为什么说郭为是哲学家呢?因为他在著作中谈到高深的哲学,如“数据如水,奔流不息,无界融合”。他引述古希腊哲学家...一、作为哲学的AI for Process(一)郭为的哲学思想1.郭为是谁郭为是谁?他是一位哲学家。顺便说,他同时还领导着神州数码。为什么说郭为是哲学家呢?因为他在著作中谈到高深的哲学,如“数据如水,奔流不息,无界融合”。他引述古希腊哲学家赫拉克利特所说的“万物流转”,又说“你不能两次踏进同一条河流,因为新的水不断地流过你的身旁”,他所表达的意思是“世界上唯一不变的就是变化”。展开更多
Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim ...Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.展开更多
Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing addit...Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.展开更多
Processes supported by process-aware information systems are subject to continuous and often subtle changes due to evolving operational,organizational,or regulatory factors.These changes,referred to as incremental con...Processes supported by process-aware information systems are subject to continuous and often subtle changes due to evolving operational,organizational,or regulatory factors.These changes,referred to as incremental concept drift,gradually alter the behavior or structure of processes,making their detection and localization a challenging task.Traditional process mining techniques frequently assume process stationarity and are limited in their ability to detect such drift,particularly from a control-flow perspective.The objective of this research is to develop an interpretable and robust framework capable of detecting and localizing incremental concept drift in event logs,with a specific emphasis on the structural evolution of control-flow semantics in processes.We propose DriftXMiner,a control-flow-aware hybrid framework that combines statistical,machine learning,and process model analysis techniques.The approach comprises three key components:(1)Cumulative Drift Scanner that tracks directional statistical deviations to detect early drift signals;(2)a Temporal Clustering and Drift-Aware Forest Ensemble(DAFE)to capture distributional and classification-level changes in process behavior;and(3)Petri net-based process model reconstruction,which enables the precise localization of structural drift using transition deviation metrics and replay fitness scores.Experimental validation on the BPI Challenge 2017 event log demonstrates that DriftXMiner effectively identifies and localizes gradual and incremental process drift over time.The framework achieves a detection accuracy of 92.5%,a localization precision of 90.3%,and an F1-score of 0.91,outperforming competitive baselines such as CUSUM+Histograms and ADWIN+Alpha Miner.Visual analyses further confirm that identified drift points align with transitions in control-flow models and behavioral cluster structures.DriftXMiner offers a novel and interpretable solution for incremental concept drift detection and localization in dynamic,process-aware systems.By integrating statistical signal accumulation,temporal behavior profiling,and structural process mining,the framework enables finegrained drift explanation and supports adaptive process intelligence in evolving environments.Its modular architecture supports extension to streaming data and real-time monitoring contexts.展开更多
This study investigated the effects of xu-argument-based continuation writing on learners’processing of source texts.Seventy-five participants were randomly assigned to three conditions:(1)continuation writing,(2)sum...This study investigated the effects of xu-argument-based continuation writing on learners’processing of source texts.Seventy-five participants were randomly assigned to three conditions:(1)continuation writing,(2)summary writing,or(3)reading comprehension.Eye-tracking data were collected during reading,measuring early(first fixation duration,first pass duration)and late(go-past time,total fixation duration)eye movements.During writing,source-text rereading was tracked via fixation counts and durations.Results showed that task type did not affect initial lexical access,as first fixation duration showed no group differences.However,both production groups exhibited significantly longer first pass durations than the reading comprehension group.Late measures revealed a gradient pattern:the continuation writing group spent significantly longer gopast time and total fixation duration than the summary writing group,which exceeded the reading comprehension group.This indicates that continuation tasks promoted deeper cognitive engagement during reading.During writing,the continuation writing group spent more time rereading the source text with higher fixation counts than the summary writing group.These findings suggest that continuation writing triggers more intensive reader-text interaction during pre-writing and enhances comprehension-production coupling through sustained attention to input during writing.This study sheds light on the cognitive mechanisms underlying the theoretical and pedagogical value of xu-argument.展开更多
The aging process is an inexorable fact throughout our lives and is considered a major factor in develo ping neurological dysfunctions associated with cognitive,emotional,and motor impairments.Aging-associated neurode...The aging process is an inexorable fact throughout our lives and is considered a major factor in develo ping neurological dysfunctions associated with cognitive,emotional,and motor impairments.Aging-associated neurodegenerative diseases are characterized by the progressive loss of neuronal structure and function.展开更多
Dynamic melt modification of polyethylene via the direct grafting of peroxide fragments shows promise for the development of processable functionalized materials.In this study,four linear low-density polyethylenes(LLD...Dynamic melt modification of polyethylene via the direct grafting of peroxide fragments shows promise for the development of processable functionalized materials.In this study,four linear low-density polyethylenes(LLDPEs)with comparable molecular weights but different short-chain branch(SCB)contents(ranging of 5-66 per 1000 carbon atoms)were modified via dynamic melt mixing using 2 wt% benzoyl peroxide at 145℃ and 50 r/min for 30 min.The influence of SCB content on the processability and structure of the resulting products was systematically investigated.All modified products exhibited good melt processability with melt flow rates(MFR)ranging from 0.46 g/10min to 1.07 g/10min.Products derived from low-SCB LLDPEs showed a lower MFR,higher cross-linking content,a larger number of long-chain branches,and a higher degree of benzoyl grafting.In contrast,those produced from high-SCB LLDPEs exhibited improved processability,reduced cross-linking,fewer long-chain branches,and lower benzoyl grafting levels.A detailed structural investigation of the soluble and insoluble fractions,which were separated using trichlorobenzene fractionation,was conducted to analyze the structural features of various modified products and demonstrate that the SCB content(i.e.,tertiary carbon density)significantly influences radical coupling during dynamic modification.Elevated tertiary carbon density,by introducing greater steric hindrance,suppresses radical coupling during dynamic modification,thereby reducing the efficiency of both crosslinking and peroxide fragment grafting.These findings provide new insights into the structure-reactivity relationships in peroxide-induced polyethylene modification and lay the foundation for tailoring material properties via dynamic processing.展开更多
The complexity of the seismicity pattern for the subduction zone along the oceanic plate triggered the outer rise events and revealed cyclic tectonic deformation conditions along the plate subduction zones.The outer r...The complexity of the seismicity pattern for the subduction zone along the oceanic plate triggered the outer rise events and revealed cyclic tectonic deformation conditions along the plate subduction zones.The outer rise earthquakes have been observed along the Sunda arc,following the estimated rupture area of the 2005 M_(W)8.6 Nias earthquakes.Here,we used kinematic waveform inversion(KIWI)to obtain the source parameters of the 14 May 2021 M_(W)6.6 event off the west coast of northern Sumatra and to define the fault plane that triggered this outer rise event.The KIWI algorithm allows two types of seismic source to be configured:the moment tensor model to describe the type of shear with six moment tensor components and the Eikonal model for the rupture of pure double-couple sources.This method was chosen for its flexibility to be applied for different sources of seismicity and also for the automated full-moment tensor solution with real-time monitoring.We used full waveform traces from 8 broadband seismic stations within 1000 km epicentral distances sourced from the Incorporated Research Institutions for Seismology(IRIS-IDA)and Geofon GFZ seismic record databases.The initial origin time and hypocenter values are obtained from the IRIS-IDA.The synthetic seismograms used in the inversion process are based on the existing regional green function database model and were accessed from the KIWI Tools Green's Function Database.The obtained scalar seismic moment value is 1.18×10^(19)N·m,equivalent to a moment magnitude M_(W)6.6.The source parameters are 140°,44°,and−99°for the strike,dip,and rake values at a centroid depth of 10.2 km,indicating that this event is a normal fault earthquake that occurred in the outer rise area.The outer rise events with normal faults typically occur at the shallow part of the plate,with nodal-plane dips predominantly in the range of 30°-60°on the weak oceanic lithosphere due to hydrothermal alteration.The stress regime around the plate subduction zone varies both temporally and spatially due to the cyclic influences of megathrust earthquakes.Tensional outer rise earthquakes tend to occur after the megathrust events.The relative timing of these events is not known due to the viscous relaxation of the down going slab and poroelastic response in the trench slope region.The occurrence of the 14 May 2021 earthquake shows the seismicity in the outer rise region in the strongly coupled Sunda arc subduction zone due to elastic bending stress within the duration of the seismic cycle.展开更多
To explore the best preparation process for terminal blend(TB)composite-modified asphalt and to filter its formulation with excellent performance,this study evaluates the performance of TB composite modified asphalt b...To explore the best preparation process for terminal blend(TB)composite-modified asphalt and to filter its formulation with excellent performance,this study evaluates the performance of TB composite modified asphalt by physical property index,microscopic morphology,rheological testing,and infrared spectroscopy on multiple scales.The results show that the best preparation process for TB-modified asphalt is stirring at 260℃ for 4 h at 400 rpm,which significantly reduces the modification time of the asphalt.From a physical property viewpoint,the TB composite-modified asphalt sample with 5% styrene-butadiene-styrene(SBS)+1% aromatics+0.1% sulfur exhibits high-comprehensive,high-and low-temperature properties.More-over,its crosslinked mesh structure comprises black rubber particles uniformly interwoven in the middle,which further enhances the performance of the asphalt and results in an excellent performance formulation.In addition,the sample with 5%SBS content has a higher G*value and smaller δ value than that with 3%SBS content,indicating that its high-temperature resistance is improved.The effect of adding 3%SBS content on the viscoelastic ratio is,to some extent,less than that caused by 20% rubber powder.展开更多
In this paper,we propose a novel graph signal processing convolution recurrent network(GSP CRN)for signal enhancement against high suppressive interference(HSI)in wireless communications.GSPCRN consists of the short-t...In this paper,we propose a novel graph signal processing convolution recurrent network(GSP CRN)for signal enhancement against high suppressive interference(HSI)in wireless communications.GSPCRN consists of the short-time graph signal processing(SGSP)approach and a modified convolution recurrent network.Similar to the traditional shorttime time-frequency transformation,SGSP frames the complex-valued communication signal and transforms it to the graph-domain representations,where the connection and weight flexibility of each vertex are fully taken into account.In the presence of HSI,SGSP can extract signal features from new graph-domain dimensions and empower neural networks for weak signal enhancement.Two SGSP methods,adjacency singular value decomposition and implicit graph transformation,are designed to capture relationships among the sampling points in the segmented signals.Simulation results demonstrate that our proposed GSPCRN outperforms existing classic methods in extracting weak signals from the HSI environment.When the interference-to-signal ratio exceeds 27dB,only our proposed GSPCRN can achieve the interference mitigation.展开更多
High entropy alloys(HEAs)have recently attracted significant attention due to their exceptional mechanical properties and potential applications across various fields.Friction stir welding and processing(FSW/P),as not...High entropy alloys(HEAs)have recently attracted significant attention due to their exceptional mechanical properties and potential applications across various fields.Friction stir welding and processing(FSW/P),as notable solid-state welding and processing techniques,have been proved effectiveness in enhancing microstructures and mechanical properties of HEAs.This review article summarizes the current status of FSW/P of HEAs.The welding materials and conditions used for FSW/P in HEAs are reviewed and discussed.The effects of FSW/P on the evolutions of grain structure,texture,dislocation,and secondary phase for different HEAs are highlighted.Furthermore,the influences of FSW/P on the mechanical properties of various HEAs are analyzed.Finally,potential applications,challenges,and future directions of FSW/P in HEAs are forecasted.Overall,FSW/P enable to refine grains of HEAs through dynamic recrystallization and to activate diverse deformation mechanisms of HEAs through tailoring phase structures,thereby significantly improving the strength,hardness,and ductility of both single-and dual-phase HEAs.Future progress in this field will rely on comprehensive optimization of processing parameters and alloy composition,integration of multi-scale modeling with advanced characterization for in-depth exploration of microstructural mechanisms,systematic evaluation of functional properties,and effective bridging of the gap between laboratory research and industrial application.The review aims to provide an overview of recent advancements in the FSW/P of HEAs and encourage further research in this area.展开更多
While the Ordos Basin is recognized for its substantial hydrocarbon exploration prospects,its rugged loess tableland terrain has rendered seismic exploration exceptionally challenging[1-3].Persistent obstacles such as...While the Ordos Basin is recognized for its substantial hydrocarbon exploration prospects,its rugged loess tableland terrain has rendered seismic exploration exceptionally challenging[1-3].Persistent obstacles such as complex 3D survey planning,low signal-tonoise ratio raw data,inadequate near-surface velocity modeling,and imaging inaccuracy have long hindered the advancement of seismic exploration across this region.Through a problem-solving approach rooted in geological target analysis,this research systematically investigates the behavioral patterns of nodal seismometer-based high-density seismic acquisition in loess plateau.Tailored advancements in waveform enhancement and depth velocity modelling methodologies have been engineered.Field validations confirm that the optimized workflow demonstrates marked improvements in amplitude preservation and imaging resolution,offering novel insights for future reservoir characterization endeavors.展开更多
基金The authors thank the "National" Science Council, Taiwan, China for financially supporting (No. NSC95- 2211-E-006-032).
文摘Both citrate and hypophosphite in aqueous solution were degraded by advanced oxidation processes （Fe^2＋/H2O2, UV/Fe^2＋/H2O2, and electrolysis/Fe^2＋/H2O2） in this study. Comparison of these techniques in oxidation efficiency was undertaken. It was found that Fenton process could not completely degrade citrate in the presence of hypophosphite since it caused a series inhibition. Therefore, UV light （photo-Fenton） or electron current （electro-Fenton） was applied to improve the degradation efficiency of the Fenton process. Results showed that both photo-Fenton and electro-Fenton processes could overcome the inhibition of hypophosphite, especially the electro-Fenton.
基金Project supported by the National Natural Science Foundation of China (No. 50478049)the Natural Science Foundation of Guangdong Province (No. 04011215), China
文摘As a novel advanced oxidation process (AOP), electro-Fenton process is powerful for degrading most organic compounds including toxic and non-biodegradable ones, and so has attracted great attention. This paper reviews this process in detail including the mechanism, electrolytic bath, electrode materials, aerations and operation parameters. The application of electro-Fenton method in wastewater treatment is evaluated and summarized. Future work in this field is suggested, and three main directions of new electrode exploitation, development of assisted technologies and mechanistic study should be strengthened.
基金funding from the National Natural Science Foundation of China (Nos.22076142,21677106,22076140)National Key Basic Research Program of China (No.2017YFA0403402)+2 种基金National Natural Science Foundation of China (No.U1932119)the Science & Technology Commission of Shanghai Municipality (No.14DZ2261100)the Fundamental Research Funds for the Central Universities。
文摘Electrochemical advanced oxidation processes (EAOPs) are effective and environmentally friendly for the treatment of refractory organic pollutants.Among EAOPs,heterogeneous electro-Fenton (EF) process with in-situ formation of hydrogen peroxide (H_(2)O_(2)) is an eco-friendly,cost-effective and easy-operable technology to generate hydroxyl radicals (;OH) with high redox potential.The generation of;OH is determined by the synergistic H_(2)O_(2)formation and activation.The surface catalytic mechanisms for H_(2)O_(2)activation in the heterogeneous EF process were discussed.Some required features such as heteroatom doping and oxygen groups for H_(2)O_(2)formation via selective two-electron oxygen reduction reaction (ORR) with carbonaceous electrode are summarized.The solid Fenton catalysts and integrated functional cathodes that widely used in heterogeneous EF for wastewater treatment are grouped into few classes.And the brief discussion on catalytic activity and stability of materials over different experimental conditions are given.In addition,the application of heterogeneous EF process on the remediation of emerging contaminants is provided.The challenges and future prospects of the heterogeneous EF processes about catalytic fall-off and multi-step/complex techniques for water purification are emphasized.
文摘This study reports the removal of amoxicillin(AMX)in aqueous media using the electroFenton process in the presence of a graphite cathode recovered from used batteries.The impact of the relevant parameters on the electroFenton process,namely the applied current intensity,the temperature,the initial concentration of AMX and the initial concentration of ferrous ions were investigated.The results showed that the optimal values were:I=600 mA,T=25℃,[AMX]_(0)=0.082 mmol·L^( 1) and[Fe^(2+)]=1 mmol·L^(1),leading to 95%degradation and 74%mineralization.The model parameters of AMX mineralization were determined using nonlinear methods,showing that it follows a pseudosecondorder kinetic.The Energy consumption(EC)calculated under the optimal values was found to be 0.79 kWhg 1,which was of the same order of magnitude of those reported in other findings;while it is noteworthy that the electrodes used in our study are of a lower cost.
基金financially supported by the National Natural Science Foundation of China(Nos.52006049,51776055)the China Postdoctoral Science Foundation(Nos.2019M661293,2020T130149)。
文摘The Electro-Fenton(EF)process is one of the promising advanced oxidation processes(AOPs)for environmental remediation.The H_(2)O_(2) yield of EF process largely determines its performance on organic pollutants degradation.Conventional Pd-catalytic EF process generates H_(2)O_(2) via the combination reaction of anodic O_(2) and cathodic H;.However,the relatively expensive catalyst limits its application.Herein,a hybrid Pd/activated carbon(Pd/AC)-stainless steel mesh(SS)cathode(PACSS)was proposed,which enables more efficie nt H_(2)O_(2)generation.It utilizes AC,the support of Pd catalyst,as part of cathode for H_(2)O_(2) generation via 2-electron anodic O_(2) reduction,and SS serve as a current distributor.Moreover,H_(2)O_(2) could be catalytically decomposed upon AC to generate highly reactive·OH,which avoids the use of Fe;.Compared with conventional Pd catalyst,H_(2)O_(2) concentration obtained by PACSS cathode is248.2%higher,the O_(2)utilization efficiency was also increased from 3.2%to 10.8%.Within 50 min,26.3%,72.5%,and 94.0%H_(2)O_(2) was decomposed by Pd,AC,and Pd/AC.Fluorescence detection results implied that Pd/AC is effective upon H_(2)O_(2) activation for·OH generation.Finally,iron-free EF process enabled by PACSS cathode was examined to be effective for reactive blue 19(RB19)degradation.After continuous running for 10 cycles(500 min),the PACSS cathode was still stable for H_(2)O_(2)generation,H_(2)O_(2)activation,and RB19 degradation,showing its potential application for organic pollutants degradation without increase in the running cost.
基金This work was supported by the KIST Institutional Program(2E32461)the NationalResearch Council of Science&Technology(NST)grant(CPS21041-100)+1 种基金the National Research Foundation ofKorea(NRF)grant funded by the Korea Government(MSIT)(No.RS-2023-00209940,NRF-2022R 1F1A1068725, NRF-2022M3H4A7046278)Korea EnvironmentIndustry&Technology Institute(KEITI)through theEcological Imitation-based Environmental Pollution Man-agement Technology Development Project,funded by theKorea Ministry of Environment(MOE)(2021002800005).
文摘Atomically dispersed single-atom catalysts(SACs)on carbon supports show great promise for H_(2)O_(2) electrosynthesis,but conventional wet chemistry methods using particulate carbon blacks in powder form have limited their potential as two-electron(2^(e−))oxygen reduction reaction(ORR)catalysts.Here,we demonstrate high-performance Co SACs supported on a free-standing aligned carbon nanofiber(CNF)using electrospinning and arc plasma deposition(APD).Based on the surface oxidation treatment of aligned CNF and precise control of the deposition amount in a dry-based APD process,we successfully form densely populated Co SACs on aligned CNF.Through experimental analyses and density functional theory calculations,we reveal that Co SAC has a Co–N_(2)–O_(2) moiety with one epoxy group,leading to excellent 2^(e−)ORR activity.Furthermore,the aligned CNF significantly improves mass transfer in flow cells compared to randomly oriented CNF,showing an overpotential reduction of 30 mV and a 1.3-fold improvement(84.5%)in Faradaic efficiency,and finally achieves an outstanding production rate of 15.75 mol gcat^(−1) h^(−1) at 300 mA cm^(−2).The high-performance Co SAC supported on well-aligned CNF is also applied in an electro-Fenton process,demonstrating rapid removal of methylene blue and bisphenol F due to its exceptional 2e^(−)ORR activity.
文摘The Electrochemical advanced oxidation method “Electro-Fenton” has been applied to remove 17β-estradiol (17β)- estra-1,3,5(10)-triéne-3,17-diol) in aqueous-acetonitrile mixture. This endocrine disrupting is a steroid hormone, releases from humans, animals and residual pharmaceuticals into the environmental water and usually causes suspected undesirable effects in aquatic organisms. The degradation of this organic compound by Electro-Fenton process was showed using a carbon felt cathode and platinum anode. The evolution of the concentration during treatment was followed up by high performance liquid chromatography (HPLC). The influence of operating conditions on the degradation of 17β-estradiol by Electro-Fenton step, such as initial concentration and catalyst concentration, has been investi- gated and discussed. We showed that the degradation reaction obeyed apparent first-order reaction kinetics, with absolute rate constant determined as 5.12 × 109 M–1 s–1 by competitive kinetics method taking Benzoic Acid as reference compound. The results confirm the efficiency of the Electro-Fenton process to degrade organic pollutant in aqueous-acetonitrile mixture.
文摘一、作为哲学的AI for Process(一)郭为的哲学思想1.郭为是谁郭为是谁?他是一位哲学家。顺便说,他同时还领导着神州数码。为什么说郭为是哲学家呢?因为他在著作中谈到高深的哲学,如“数据如水,奔流不息,无界融合”。他引述古希腊哲学家赫拉克利特所说的“万物流转”,又说“你不能两次踏进同一条河流,因为新的水不断地流过你的身旁”,他所表达的意思是“世界上唯一不变的就是变化”。
文摘Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.
基金National Key Research and Development Program of China(2022YFB4600902)Shandong Provincial Science Foundation for Outstanding Young Scholars(ZR2024YQ020)。
文摘Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.
文摘Processes supported by process-aware information systems are subject to continuous and often subtle changes due to evolving operational,organizational,or regulatory factors.These changes,referred to as incremental concept drift,gradually alter the behavior or structure of processes,making their detection and localization a challenging task.Traditional process mining techniques frequently assume process stationarity and are limited in their ability to detect such drift,particularly from a control-flow perspective.The objective of this research is to develop an interpretable and robust framework capable of detecting and localizing incremental concept drift in event logs,with a specific emphasis on the structural evolution of control-flow semantics in processes.We propose DriftXMiner,a control-flow-aware hybrid framework that combines statistical,machine learning,and process model analysis techniques.The approach comprises three key components:(1)Cumulative Drift Scanner that tracks directional statistical deviations to detect early drift signals;(2)a Temporal Clustering and Drift-Aware Forest Ensemble(DAFE)to capture distributional and classification-level changes in process behavior;and(3)Petri net-based process model reconstruction,which enables the precise localization of structural drift using transition deviation metrics and replay fitness scores.Experimental validation on the BPI Challenge 2017 event log demonstrates that DriftXMiner effectively identifies and localizes gradual and incremental process drift over time.The framework achieves a detection accuracy of 92.5%,a localization precision of 90.3%,and an F1-score of 0.91,outperforming competitive baselines such as CUSUM+Histograms and ADWIN+Alpha Miner.Visual analyses further confirm that identified drift points align with transitions in control-flow models and behavioral cluster structures.DriftXMiner offers a novel and interpretable solution for incremental concept drift detection and localization in dynamic,process-aware systems.By integrating statistical signal accumulation,temporal behavior profiling,and structural process mining,the framework enables finegrained drift explanation and supports adaptive process intelligence in evolving environments.Its modular architecture supports extension to streaming data and real-time monitoring contexts.
文摘This study investigated the effects of xu-argument-based continuation writing on learners’processing of source texts.Seventy-five participants were randomly assigned to three conditions:(1)continuation writing,(2)summary writing,or(3)reading comprehension.Eye-tracking data were collected during reading,measuring early(first fixation duration,first pass duration)and late(go-past time,total fixation duration)eye movements.During writing,source-text rereading was tracked via fixation counts and durations.Results showed that task type did not affect initial lexical access,as first fixation duration showed no group differences.However,both production groups exhibited significantly longer first pass durations than the reading comprehension group.Late measures revealed a gradient pattern:the continuation writing group spent significantly longer gopast time and total fixation duration than the summary writing group,which exceeded the reading comprehension group.This indicates that continuation tasks promoted deeper cognitive engagement during reading.During writing,the continuation writing group spent more time rereading the source text with higher fixation counts than the summary writing group.These findings suggest that continuation writing triggers more intensive reader-text interaction during pre-writing and enhances comprehension-production coupling through sustained attention to input during writing.This study sheds light on the cognitive mechanisms underlying the theoretical and pedagogical value of xu-argument.
文摘The aging process is an inexorable fact throughout our lives and is considered a major factor in develo ping neurological dysfunctions associated with cognitive,emotional,and motor impairments.Aging-associated neurodegenerative diseases are characterized by the progressive loss of neuronal structure and function.
基金financially supported by the Science and Technology Project of PetroChina Company Limited,China(No.2022DJ6314)the National Natural Science Foundation of China(No.52173056)。
文摘Dynamic melt modification of polyethylene via the direct grafting of peroxide fragments shows promise for the development of processable functionalized materials.In this study,four linear low-density polyethylenes(LLDPEs)with comparable molecular weights but different short-chain branch(SCB)contents(ranging of 5-66 per 1000 carbon atoms)were modified via dynamic melt mixing using 2 wt% benzoyl peroxide at 145℃ and 50 r/min for 30 min.The influence of SCB content on the processability and structure of the resulting products was systematically investigated.All modified products exhibited good melt processability with melt flow rates(MFR)ranging from 0.46 g/10min to 1.07 g/10min.Products derived from low-SCB LLDPEs showed a lower MFR,higher cross-linking content,a larger number of long-chain branches,and a higher degree of benzoyl grafting.In contrast,those produced from high-SCB LLDPEs exhibited improved processability,reduced cross-linking,fewer long-chain branches,and lower benzoyl grafting levels.A detailed structural investigation of the soluble and insoluble fractions,which were separated using trichlorobenzene fractionation,was conducted to analyze the structural features of various modified products and demonstrate that the SCB content(i.e.,tertiary carbon density)significantly influences radical coupling during dynamic modification.Elevated tertiary carbon density,by introducing greater steric hindrance,suppresses radical coupling during dynamic modification,thereby reducing the efficiency of both crosslinking and peroxide fragment grafting.These findings provide new insights into the structure-reactivity relationships in peroxide-induced polyethylene modification and lay the foundation for tailoring material properties via dynamic processing.
基金supported by the National Natural Science Foundation of China(Grant No.42130312)。
文摘The complexity of the seismicity pattern for the subduction zone along the oceanic plate triggered the outer rise events and revealed cyclic tectonic deformation conditions along the plate subduction zones.The outer rise earthquakes have been observed along the Sunda arc,following the estimated rupture area of the 2005 M_(W)8.6 Nias earthquakes.Here,we used kinematic waveform inversion(KIWI)to obtain the source parameters of the 14 May 2021 M_(W)6.6 event off the west coast of northern Sumatra and to define the fault plane that triggered this outer rise event.The KIWI algorithm allows two types of seismic source to be configured:the moment tensor model to describe the type of shear with six moment tensor components and the Eikonal model for the rupture of pure double-couple sources.This method was chosen for its flexibility to be applied for different sources of seismicity and also for the automated full-moment tensor solution with real-time monitoring.We used full waveform traces from 8 broadband seismic stations within 1000 km epicentral distances sourced from the Incorporated Research Institutions for Seismology(IRIS-IDA)and Geofon GFZ seismic record databases.The initial origin time and hypocenter values are obtained from the IRIS-IDA.The synthetic seismograms used in the inversion process are based on the existing regional green function database model and were accessed from the KIWI Tools Green's Function Database.The obtained scalar seismic moment value is 1.18×10^(19)N·m,equivalent to a moment magnitude M_(W)6.6.The source parameters are 140°,44°,and−99°for the strike,dip,and rake values at a centroid depth of 10.2 km,indicating that this event is a normal fault earthquake that occurred in the outer rise area.The outer rise events with normal faults typically occur at the shallow part of the plate,with nodal-plane dips predominantly in the range of 30°-60°on the weak oceanic lithosphere due to hydrothermal alteration.The stress regime around the plate subduction zone varies both temporally and spatially due to the cyclic influences of megathrust earthquakes.Tensional outer rise earthquakes tend to occur after the megathrust events.The relative timing of these events is not known due to the viscous relaxation of the down going slab and poroelastic response in the trench slope region.The occurrence of the 14 May 2021 earthquake shows the seismicity in the outer rise region in the strongly coupled Sunda arc subduction zone due to elastic bending stress within the duration of the seismic cycle.
基金Funded by the National Natural Science Foundation of China(No.52278446)。
文摘To explore the best preparation process for terminal blend(TB)composite-modified asphalt and to filter its formulation with excellent performance,this study evaluates the performance of TB composite modified asphalt by physical property index,microscopic morphology,rheological testing,and infrared spectroscopy on multiple scales.The results show that the best preparation process for TB-modified asphalt is stirring at 260℃ for 4 h at 400 rpm,which significantly reduces the modification time of the asphalt.From a physical property viewpoint,the TB composite-modified asphalt sample with 5% styrene-butadiene-styrene(SBS)+1% aromatics+0.1% sulfur exhibits high-comprehensive,high-and low-temperature properties.More-over,its crosslinked mesh structure comprises black rubber particles uniformly interwoven in the middle,which further enhances the performance of the asphalt and results in an excellent performance formulation.In addition,the sample with 5%SBS content has a higher G*value and smaller δ value than that with 3%SBS content,indicating that its high-temperature resistance is improved.The effect of adding 3%SBS content on the viscoelastic ratio is,to some extent,less than that caused by 20% rubber powder.
基金supported by he National Social Science Found of China(2022-SKJJ-B-112).
文摘In this paper,we propose a novel graph signal processing convolution recurrent network(GSP CRN)for signal enhancement against high suppressive interference(HSI)in wireless communications.GSPCRN consists of the short-time graph signal processing(SGSP)approach and a modified convolution recurrent network.Similar to the traditional shorttime time-frequency transformation,SGSP frames the complex-valued communication signal and transforms it to the graph-domain representations,where the connection and weight flexibility of each vertex are fully taken into account.In the presence of HSI,SGSP can extract signal features from new graph-domain dimensions and empower neural networks for weak signal enhancement.Two SGSP methods,adjacency singular value decomposition and implicit graph transformation,are designed to capture relationships among the sampling points in the segmented signals.Simulation results demonstrate that our proposed GSPCRN outperforms existing classic methods in extracting weak signals from the HSI environment.When the interference-to-signal ratio exceeds 27dB,only our proposed GSPCRN can achieve the interference mitigation.
基金supported by National Natural Science Foundation of China(Grant No.52171032)Hebei Natural Science Foundation(Grant No.E2023501002)Fundamental Research Funds for the Central Universities(Grant No.2024GFYD003)。
文摘High entropy alloys(HEAs)have recently attracted significant attention due to their exceptional mechanical properties and potential applications across various fields.Friction stir welding and processing(FSW/P),as notable solid-state welding and processing techniques,have been proved effectiveness in enhancing microstructures and mechanical properties of HEAs.This review article summarizes the current status of FSW/P of HEAs.The welding materials and conditions used for FSW/P in HEAs are reviewed and discussed.The effects of FSW/P on the evolutions of grain structure,texture,dislocation,and secondary phase for different HEAs are highlighted.Furthermore,the influences of FSW/P on the mechanical properties of various HEAs are analyzed.Finally,potential applications,challenges,and future directions of FSW/P in HEAs are forecasted.Overall,FSW/P enable to refine grains of HEAs through dynamic recrystallization and to activate diverse deformation mechanisms of HEAs through tailoring phase structures,thereby significantly improving the strength,hardness,and ductility of both single-and dual-phase HEAs.Future progress in this field will rely on comprehensive optimization of processing parameters and alloy composition,integration of multi-scale modeling with advanced characterization for in-depth exploration of microstructural mechanisms,systematic evaluation of functional properties,and effective bridging of the gap between laboratory research and industrial application.The review aims to provide an overview of recent advancements in the FSW/P of HEAs and encourage further research in this area.
文摘While the Ordos Basin is recognized for its substantial hydrocarbon exploration prospects,its rugged loess tableland terrain has rendered seismic exploration exceptionally challenging[1-3].Persistent obstacles such as complex 3D survey planning,low signal-tonoise ratio raw data,inadequate near-surface velocity modeling,and imaging inaccuracy have long hindered the advancement of seismic exploration across this region.Through a problem-solving approach rooted in geological target analysis,this research systematically investigates the behavioral patterns of nodal seismometer-based high-density seismic acquisition in loess plateau.Tailored advancements in waveform enhancement and depth velocity modelling methodologies have been engineered.Field validations confirm that the optimized workflow demonstrates marked improvements in amplitude preservation and imaging resolution,offering novel insights for future reservoir characterization endeavors.
