A series of blue and blue‑green Ir(Ⅲ)complexes has been investigated theoretically to explore their electronic structures,photophysical properties,efficiency roll‑off effect,and thermal activation delayed fluorescenc...A series of blue and blue‑green Ir(Ⅲ)complexes has been investigated theoretically to explore their electronic structures,photophysical properties,efficiency roll‑off effect,and thermal activation delayed fluorescence(TADF)properties.All calculations were performed using density functional theory(DFT)and time‑dependent density functional theory(TDDFT).Calculations for electronic structures,frontier molecular orbital characteristics(which determine the efficiency roll‑off effect of the complexes),and photophysical properties were conducted using the Gaussian 09 software package.The calculation of spin‑orbit coupling matrix elements<T|HSOC|S>,which determine the TADF properties of the complexes,was performed using the ORCA software package.The calculation results show that the auxiliary ligand tetraphenylimidodiphosphinate(tpip),a strong electron‑withdrawing group,can mitigate the efficiency roll‑off effect of the complex.Furthermore,TADF is observed in one of the designed complexes,(F_(3)Phppy)_(2)Ir(tpip),where F_(3)Phppy=2‑[4‑(2,4,6‑trifluorophenyl)phenyl]pyridine.展开更多
The electric arc furnace(EAF)offers advantages in energy savings,environmental protection,and high efficiency by using scrap as the primary charge and utilizing a high-temperature electric arc as the main heat source ...The electric arc furnace(EAF)offers advantages in energy savings,environmental protection,and high efficiency by using scrap as the primary charge and utilizing a high-temperature electric arc as the main heat source for steel smelting.The improvement of EAF smelting efficiency is primarily influenced by three key factors:the heat transfer efficiency of the electric arc,the intensity of molten pool stirring,and the melting rate of scrap.The arc heat transfer efficiency determines the energy input efficiency and the maximum smelting temperature of the EAF.Molten pool stirring intensity plays a crucial role in ensuring uniformity in temperature,composition,and flow within the furnace,preventing the formation of dead zones.The scrap melting rate is a decisive factor in EAF smelting efficiency,largely governed by the coupling of heat and mass transfer.Thus,understanding not only the rapid melting mechanism of scrap but also the impact of arc heat transfer and molten pool stirring is essential to optimizing the smelting process.Advancing research in these areas is critical for shortening the EAF smelting cycle,reducing energy consumption,lowering costs,and improving resource utilization.Therefore,recent achievements and development trends in fundamental research on enhancing EAF smelting efficiency were summarized.展开更多
Complex-valued double-sideband direct detection(DD)can reconstruct the optical field and achieve a high electrical spectral efficiency(ESE)comparable to that of a coherent homodyne receiver,and DD does not require a c...Complex-valued double-sideband direct detection(DD)can reconstruct the optical field and achieve a high electrical spectral efficiency(ESE)comparable to that of a coherent homodyne receiver,and DD does not require a costly local oscillator laser.However,a fundamental question remains if there is an optimal DD receiver structure with the simplest design to approach the performance of the coherent homodyne detection.This study derives the optimal DD receiver structure with an optimal transfer function to recover a quadrature amplitude modulation(QAM)signal with a near-zero guard band at the central frequency of the signal.We derive the theoretical ESE limit for various detection schemes by invoking Shannon’s formula.Our proposed scheme is closest to coherent homodyne detection in terms of the theoretical ESE limit.By leveraging a WaveShaper to construct the optimal transfer function,we conduct a proof-of-concept experiment to transmit a net 228.85-Gb/s 64-QAM signal over an 80-km single-mode fiber with a net ESE of 8.76 b/s/Hz.To the best of our knowledge,this study reports the highest net ESE per polarization per wavelength for DD transmission beyond 40-km single-mode fiber.For a comprehensive metric,denoted as 2ESE×Reach,we achieve the highest 2ESE×Reach per polarization per wavelength for DD transmission.展开更多
In the current social environment,the importance of energy conservation and emission reduction is increasing day by day for both the country and its people.Electronic and electrical products,as important items for peo...In the current social environment,the importance of energy conservation and emission reduction is increasing day by day for both the country and its people.Electronic and electrical products,as important items for people’s production and life,require high attention from industry insiders in terms of their energy efficiency testing.Relying on energy efficiency testing can achieve the goal of energy conservation and emission reduction,and related quality control technologies will also inject new momentum into the green development of the industry.This article will discuss the practical strategies of quality control technology for energy efficiency testing of electronic and electrical products based on the significance of such testing,hoping to provide some help.展开更多
We derived an equation for saturation in carbonate reservoirs based on the electrical efficiency model in the case of lacking core data. Owing to the complex pore structure and strong heterogeneity in carbonate reserv...We derived an equation for saturation in carbonate reservoirs based on the electrical efficiency model in the case of lacking core data. Owing to the complex pore structure and strong heterogeneity in carbonate reservoirs, the relation between electrical efficiency and water porosity is either complex or linear. We proposed an electrical efficiency equation that accounts for the relation between electrical efficiency and water porosity. We also proposed a power-law relation between electrical efficiency and deep-formation resistivity and analyzed the factors controlling the error in the water saturation computations. We concluded that the calculation accuracy of the electrical efficiency is critical to the application of the saturation equation. The saturation equation was applied to the carbonate reservoirs of three wells in Iraq and Indonesia. For relative rock electrical efficiency error below 0.1, the water saturation absolute error is also below 0.1. Therefore, we infer that the proposed saturation equation generally satisfies the evaluation criteria for carbonate reservoirs.展开更多
In this paper,electrically excited synchronous machines(EESMs)using copper(Cu)and aluminum(Al)windings are compared for the feasibility of replacing Cu windings with Al windings in electric vehicle(EV)applications sin...In this paper,electrically excited synchronous machines(EESMs)using copper(Cu)and aluminum(Al)windings are compared for the feasibility of replacing Cu windings with Al windings in electric vehicle(EV)applications since Al windings have lower mass density and cost per weight,but higher resistivity and lower thermal conductivity than Cu windings.The EESMs with four winding configurations are optimized with an electromagnetic-thermal co-optimization method.The optimized EESM with only Cu windings is considered as the baseline in this study.Results show that the EESM with stator-Cu/rotor-Al windings has the least torque reduction(12.1%)compared to the baseline among the three EESMs with Al windings and the highest torque mass density among all EESMs.Meanwhile,although the new European driving cycle efficiency of the stator-Cu/rotor-Al EESM is 1.8%lower than that of the baseline,the torque per cost is 71%higher,and the maximum rotor mechanical stress is 8%lower.Therefore,the EESMs with stator-Cu/rotor-Al windings are prospective substitutions of those with only Cu windings for EV applications considering the trade-off between performance and cost.展开更多
Thermal storage electric heating(TSEH),as a prevalent variable load resource,offers significant potential for enhancing system flexibility when aggregated into a cluster.To address the uncertainties of renewable energ...Thermal storage electric heating(TSEH),as a prevalent variable load resource,offers significant potential for enhancing system flexibility when aggregated into a cluster.To address the uncertainties of renewable energy and load forecasting in active distribution networks(ADN),this paper proposes a multi-timescale coordinated optimal dispatch strategy that incorporates TSEH clusters.It utilizes the thermal storage characteristics and short-term regulation capabilities of TSEH,along with the rapid and gradual response characteristics of resources in active distribution grids,to develop a coordinated optimization dispatch mechanism for day-ahead,intraday,and real-time stages.It provides a coordinated optimized dispatch technique across several timescales for active distribution grids,taking into account the integration of TSEH clusters.The proposed method is validated on a modified IEEE 33-node system.Simulation results demonstrate that the participation of TSEH in collaborative optimization significantly reduces the total system operating cost by 8.71%compared to the scenario without TSEH.This cost reduction is attributed to a 10.84%decrease in interaction costs with the main grid and a 47.41%reduction in network loss costs,validating effective peak shaving and valley filling.The multi-timescale framework further enhances economic efficiency,with overall operating costs progressively decreasing by 3.91%(intraday)and 4.59%(real-time),and interaction costs further reduced by 5.34%and 9.25%,respectively.Moreover,the approach enhances system stability by effectively suppressing node voltage fluctuations and ensuring all voltages remain within safe operating limits during real-time operation.Therefore,the proposed approach achieves rational coordination of diverse resources,significantly improving the economic efficiency and stability of ADNs.展开更多
Sustainable water,energy and food(WEF)supplies are the bedrock upon which human society depends.Solar-driven interfacial evaporation,combined with electricity generation and cultivation,is a promising approach to miti...Sustainable water,energy and food(WEF)supplies are the bedrock upon which human society depends.Solar-driven interfacial evaporation,combined with electricity generation and cultivation,is a promising approach to mitigate the freshwater,energy and food crises.However,the performance of solar-driven systems decreases significantly during operation due to uncontrollable weather.This study proposes an integrated water/electricity cogeneration-cultivation system with superior thermal management.The energy storage evaporator,consisting of energy storage microcapsules/hydrogel composites,is optimally designed for sustainable desalination,achieving an evaporation rate of around 1.91 kg m^(-2)h^(-1).In the dark,heat released from the phase-change layer supported an evaporation rate of around 0.54kg m^(-2)h^(-1).Reverse electrodialysis harnessed the salinity-gradient energy enhanced during desalination,enabling the long-running WEC system to achieve a power output of~0.3 W m^(-2),which was almost three times higher than that of conventional seawater/surface water mixing.Additionally,an integrated crop irrigation platform utilized system drainage for real-time,on-demand wheat cultivation without secondary contaminants,facilitating seamless WEF integration.This work presents a novel approach to all-day solar water production,electricity generation and crop irrigation,offering a solution and blueprint for the sustainable development of WEF.展开更多
Although phase-change random-access memory(PCRAM)is a promising next-generation nonvolatile memory technology,challenges remain in terms of reducing energy consumption.This is primarily be-cause the high thermal condu...Although phase-change random-access memory(PCRAM)is a promising next-generation nonvolatile memory technology,challenges remain in terms of reducing energy consumption.This is primarily be-cause the high thermal conductivities of phase-change materials(PCMs)promote Joule heating dissi-pation.Repeated phase transitions also induce long-range atomic diffusion,limiting the durability.To address these challenges,phase-change heterostructure(PCH)devices that incorporate confinement sub-layers based on transition-metal dichalcogenide materials have been developed.In this study,we engi-neered a PCH device by integrating HfTe_(2),which has low thermal conductivity and excellent stability,into the PCM to realize PCRAM with enhanced thermal efficiency and structural stability.HEAT sim-ulations were conducted to validate the superior heat confinement in the programming region of the HfTe_(2)-based PCH device.Moreover,electrical measurements of the device demonstrated its outstanding performance,which was characterized by a low RESET current(∼1.6 mA),stable two-order ON/OFF ratio,and exceptional cycling endurance(∼2×10^(7)).The structural integrity of the HfTe_(2)confinement sub-layer was confirmed using X-ray photoelectron spectroscopy and transmission electron microscopy.The material properties,including electrical conductivity,cohesive energy,and electronegativity,substantiated these findings.Collectively,these results revealed that the HfTe_(2)-based PCH device can achieve significant improvements in performance and reliability compared with conventional PCRAM devices.展开更多
In this study,Al-xSi-0.3Mn-0.3Mg-0.14Fe alloys(x=6.5,7.5,8.5,wt.%)were prepared by super-slow-speed die-casting,and the effects of Si content on the microstructure,mechanical,and thermal/electrical conductivities in a...In this study,Al-xSi-0.3Mn-0.3Mg-0.14Fe alloys(x=6.5,7.5,8.5,wt.%)were prepared by super-slow-speed die-casting,and the effects of Si content on the microstructure,mechanical,and thermal/electrical conductivities in as-cast,T5,and T6 states(DIN EN 1706:2020)were investigated.It is found that the increase of Si content in the alloy enhances the formation of eutectic segregation band in the casting surface microstructure.Within the Si content range of 6.5%-8.5%,as a comprehensive evaluation criterion of mechanical properties,the quality index(QI)of 376.1 MPa can be obtained in the as-cast state of the alloy with about 7.5%Si content,373.4 MPa in T5 state of the alloy with 6.5%Si content,and 432.2 MPa in T6 state of the alloy containing 8.5%Si.The heat treatment state significantly affects the thermal conductivity and electrical conductivity of the alloys.The eutectic silicon in the alloy is segemented and further spheroidizaed during the solution process,and the solute atoms of Mg and Si are more adequately precipitated during the aging process.Both of these greatly reduce the probability of electron scattering.Thus,T6 treatment significantly improves the electrical and thermal conductivities.With the increase of Si content,both thermal conductivity and electrical conductivity decrease slightly,demonstrating a strong correlation with the Si content in the alloy.展开更多
In integrated circuit packaging,thermal interface materials(TIMs)must exhibit high thermal conductivity and electrical resistivity to prevent short circuits,enhance reliability,and ensure safety in high-voltage applic...In integrated circuit packaging,thermal interface materials(TIMs)must exhibit high thermal conductivity and electrical resistivity to prevent short circuits,enhance reliability,and ensure safety in high-voltage applications.We proposed the thermal-percolation electrical-resistive TIM incorporating binary fillers of both insulating and metallic nanowires with an orientation in the insulating polymer matrix.High thermal conductivity can be achieved through thermal percolation,while electrical non-conductivity is preserved by carefully controlling the electrical percolation threshold through metallic nanowire orientation.The electrical conductivity of the composite can be further regulated by adjusting the orientation and aspect ratio of the metallic fillers.A thermal conductivity of 10 W·m^(-1)·K^(-1)is achieved,with electrical non-conductive behavior preserved.This approach offers a pathway to realizing“thermal-percolation electrical-resistive”in hybrid TIMs,providing a strategic framework for designing high-performance TIMs.展开更多
Electrical discharge milling(ED-milling) can be a good choice for titanium alloys machining and it was proven that its machining efficiency can be improved to compete with mechanical cutting. In order to improve energ...Electrical discharge milling(ED-milling) can be a good choice for titanium alloys machining and it was proven that its machining efficiency can be improved to compete with mechanical cutting. In order to improve energy utilization efficiency of ED-milling process, unstable arc discharge and stable arc discharge combined with normal discharge were implemented for material removal by adjusting servo control strategy. The influence of electrode rotating speed and dielectric flushing pressure on machining performance was investigated by experiments. It was found that the rotating of electrode could move the position of discharge plasma channel, and high pressure flushing could wash melted debris out the discharge gap effectively. Both electrode rotating motion and high pressure flushing are contributed to the improvement of machining efficiency.展开更多
High-performance Ti_(3)C_(2)T_(x)fibers have garnered significant potential for smart fibers enabled fabrics.Nonetheless,a major challenge hindering their widespread use is the lack of strong interlayer interactions b...High-performance Ti_(3)C_(2)T_(x)fibers have garnered significant potential for smart fibers enabled fabrics.Nonetheless,a major challenge hindering their widespread use is the lack of strong interlayer interactions between Ti_(3)C_(2)T_(x)nanosheets within fibers,which restricts their properties.Herein,a versatile strategy is proposed to construct wet-spun Ti_(3)C_(2)T_(x)fibers,in which trace amounts of borate form strong interlayer crosslinking between Ti_(3)C_(2)T_(x)nanosheets to significantly enhance interactions as supported by density functional theory calculations,thereby reducing interlayer spacing,diminishing microscopic voids and promoting orientation of the nanosheets.The resultant Ti_(3)C_(2)T_(x)fibers exhibit exceptional electrical conductivity of 7781 S cm^(-1)and mechanical properties,including tensile strength of 188.72 MPa and Young's modulus of 52.42 GPa.Notably,employing equilibrium molecular dynamics simulations,finite element analysis,and cross-wire geometry method,it is revealed that such crosslinking also effectively lowers interfacial thermal resistance and ultimately elevates thermal conductivity of Ti_(3)C_(2)T_(x)fibers to 13 W m^(-1)K^(-1),marking the first systematic study on thermal conductivity of Ti_(3)C_(2)T_(x)fibers.The simple and efficient interlayer crosslinking enhancement strategy not only enables the construction of thermal conductivity Ti_(3)C_(2)T_(x)fibers with high electrical conductivity for smart textiles,but also offers a scalable approach for assembling other nanomaterials into multifunctional fibers.展开更多
This paper presents experimental results concerning the effect of dielectric type on ozone concentration and the efficiency of its generation in plasma reactor with two mesh electrodes.Three types of dielectric solid ...This paper presents experimental results concerning the effect of dielectric type on ozone concentration and the efficiency of its generation in plasma reactor with two mesh electrodes.Three types of dielectric solid were used in the study; glass, micanite and Kapton insulating foil. The experiments were conducted for voltage ranges from 2.3 to 13 k V. A plasma reactor equipped with two 0.3×0.3 mm^2 mesh electrodes made of acid resistant AISI 304 mesh was used in the experiments. The influence of the dielectric type on the concentration and efficiency of ozone generation was described. The resulting maximum concentration of the ozone was about 2.70–9.30 g O3 m^-3, depending on the dielectrics used. The difference between the maximum and the minimum ozone concentration depends on the dielectric used,this accounts for 70% at the variance. The reactor capacity has also been described in the paper; total Ct and dielectric capacitance Cd depending on the dielectric used and its thickness.展开更多
A novel Eu^(3+)-doped fluorapatite red phosphor Ca_(2)Y_(8)(BO_(4))_(2)(SiO_(4))_(4)F_(2)Eu^(3+)with pure phase was synthesized in this study.Density functional theory(DFT)calculation and diffuse reflection spectrum a...A novel Eu^(3+)-doped fluorapatite red phosphor Ca_(2)Y_(8)(BO_(4))_(2)(SiO_(4))_(4)F_(2)Eu^(3+)with pure phase was synthesized in this study.Density functional theory(DFT)calculation and diffuse reflection spectrum analysis reveal its potential as a matrix for phosphors excited by ultraviolet light.Eu^(3+)has a^(7)F_(0)→^(5)L_(6)transition at 394 nm,and the prepared phosphor exhibits a high emission intensity at 614 nm,which may be attributed to the^(5)D_(0)-^(7)F_(2)energy transition at the lower symmetry site of Eu^(3+).The optimal doping concentration of the phosphor is determined to be 11 mol%,with concentration quenching attributed to the exchange interaction mechanism.The overall color purity of the phosphor is up to 99.88%,with an internal quantum efficiency as high as 91.15%.Notably,Ca_(2)Y_(8)(BO_(4))_(2)(SiO_(4))_(4)F_(2):11 mol%Eu^(3+)(CYBSF:11 mol%Eu^(3+))phosphors exhibit good thermal stability,with a thermal quenching temperature(T1/2)of 552 K and the intensity of emission at 423 K still at 88.89%of that at 298 K.The activation energy of the phosphor is up to 0.30287 eV.Its comprehensive luminescence performance surpasses that of commercial red phosphor,making it suitable for near ultraviolet excited warm white light emitting diode(NUV-WLED)with a high color rendering index(Ra=82)and a correlated color temperature(CCT)of 4339 K.Moreover,the phosphor achieves latent fingerprint visualization and anti-counterfeiting ink on different material surfaces:glass,aluminum foil,plastic and paper.Overall,the fluorapatite CYBSF:11 mol%Eu^(3+)phosphor holds great potential for multimodal applications due to its high quantum efficiency and good thermal stability.展开更多
The performance of a 3-phase 6-pole 400 W inverter-drive induction motor was investigated using a variety of non-oriented electrical steels for stator core at PWM inverter fundamental wave frequencies of 30 to 300 Hz....The performance of a 3-phase 6-pole 400 W inverter-drive induction motor was investigated using a variety of non-oriented electrical steels for stator core at PWM inverter fundamental wave frequencies of 30 to 300 Hz. There existed an optimum Si content of the material depending on the tooth flux density. Both reduction of material thickness and stress-relief annealing of the stator core improved the motor efficiency. The influence of Si content on the efficiency was small at lower PWM frequencies, while at higher frequencies the motor efficiency increased with increasing Si content. The Cu loss WC increased and the Fe loss Wi counteractiveiy decreasedwith increasing Si content at lower frequencies; while at higher frequencies Wi had dominant effect on the efficiency. Newly developed materials RMA, having lower Fe losses after stress-relief annealing and higher flux densities with lower Si contents, showed motor efficiencies superior to conventional J1S grade materials with comparable Fe losses.展开更多
A three-dimensional approach to the effect of magnetic field incidence angle on electrical power and conversion efficiency is performed on a front-illuminated polycrystalline silicon bifacial solar cell. A solution of...A three-dimensional approach to the effect of magnetic field incidence angle on electrical power and conversion efficiency is performed on a front-illuminated polycrystalline silicon bifacial solar cell. A solution of the continuity equation allowed us to present the equations of photocurrent density, photovoltage and electric power. The influence of the angle of incidence of the magnetic field on the photocurrent density, the photovoltage and the electric power has been studied. The curves of electrical power versus dynamic junction velocity were used to extract the values of maximum electrical power and dynamic junction velocity and to calculate those of conversion efficiency. From this study, it is found that the conversion efficiency values increase with the angle of incidence of the magnetic field.展开更多
Biodegradable poly （D,L-lactide） （PLA）/carboxyl-functionalized multi-walled carbon nanotubes （c-MWCNTs） composites were achieved via in-situ polymerization. These as-prepared composite materials were characteriz...Biodegradable poly （D,L-lactide） （PLA）/carboxyl-functionalized multi-walled carbon nanotubes （c-MWCNTs） composites were achieved via in-situ polymerization. These as-prepared composite materials were characterized with FT-IR, XRD, TG, DSC, SEM, and high insulation resistance meter. The results demonstrate that the multi-walled carbon nanotube was carboxyl functionalized, which improved the collection between c-MWCNTs and PLA, and further realized the graft copolymerization of c-MWCNTs and PLA. There is a higher glass transition temperature and a lower pyrolysis temperature of PLA/c-MWCNTs composites than pure PLA. The c-MWCNTs gave a better dispersion than unmodified MWCNTs in the PLA matrix, and an even coating of PLA on the surface of c-MWCNTs was obtained, which increased the interfacial interaction. High insulation resistance analysis showed that the addition of c-MWCNTs increased the electric conductivity, and c-MWCNTs performed against the large dielectric coefficient and electrostatic state of PLA. These results demonstrated that c-MWCNTs modified PLA composites were beneficial for potential application in the development of heat-resisting and conductivity plastic engineering.展开更多
CuCrZr alloys were treated with the thermal stretch process at various temperatures from 100 to 300℃.The results reveal that the thermal stretch process is successfully developed to manufacture the precipitation hard...CuCrZr alloys were treated with the thermal stretch process at various temperatures from 100 to 300℃.The results reveal that the thermal stretch process is successfully developed to manufacture the precipitation hardening CuCrZr alloys with a good combination of microhardness and electrical conductivity.By increasing the tensile elongations at each temperature from 100 to 300℃,the microhardness increases whereas the electrical conductivity decreases slightly.Cr-containing precipitate phases with a Nishiyama-Wasserman orientation relationship to the copper matrix were observed by TEM.The achievement of high micro-hardness and acceptable electrical conductivity in the thermal stretch treated alloys is ascribed to the interactions of the heteroatom solution,dislocation increment,grain refinement and dispersive precipitation effect.展开更多
A kind of algorithm was provided to resolve the calculating problem of stochastic frontier model and applied to electric power industry.By Matlab,maximum likelihood estimation is adopted to evaluate σ and λ of stoch...A kind of algorithm was provided to resolve the calculating problem of stochastic frontier model and applied to electric power industry.By Matlab,maximum likelihood estimation is adopted to evaluate σ and λ of stochastic frontier model in this paper, then the technical efficiency of electric power companies is calculated. The calculated and analyzed results reflect the situation of the management of electric power industry on the whole,that is ,the electric power companies with high technical efficiency are those which have developed their modern enterprise system successfully.展开更多
文摘A series of blue and blue‑green Ir(Ⅲ)complexes has been investigated theoretically to explore their electronic structures,photophysical properties,efficiency roll‑off effect,and thermal activation delayed fluorescence(TADF)properties.All calculations were performed using density functional theory(DFT)and time‑dependent density functional theory(TDDFT).Calculations for electronic structures,frontier molecular orbital characteristics(which determine the efficiency roll‑off effect of the complexes),and photophysical properties were conducted using the Gaussian 09 software package.The calculation of spin‑orbit coupling matrix elements<T|HSOC|S>,which determine the TADF properties of the complexes,was performed using the ORCA software package.The calculation results show that the auxiliary ligand tetraphenylimidodiphosphinate(tpip),a strong electron‑withdrawing group,can mitigate the efficiency roll‑off effect of the complex.Furthermore,TADF is observed in one of the designed complexes,(F_(3)Phppy)_(2)Ir(tpip),where F_(3)Phppy=2‑[4‑(2,4,6‑trifluorophenyl)phenyl]pyridine.
基金supported by National Key R&D Program of China(Grant No.2022YFC3901403)China Baowu Low Carbon Metallurgy Innovation Foundation(Grant No.BWLCF202211)Program of Introducing Talents of Discipline to Universities(Grant No.B21001).
文摘The electric arc furnace(EAF)offers advantages in energy savings,environmental protection,and high efficiency by using scrap as the primary charge and utilizing a high-temperature electric arc as the main heat source for steel smelting.The improvement of EAF smelting efficiency is primarily influenced by three key factors:the heat transfer efficiency of the electric arc,the intensity of molten pool stirring,and the melting rate of scrap.The arc heat transfer efficiency determines the energy input efficiency and the maximum smelting temperature of the EAF.Molten pool stirring intensity plays a crucial role in ensuring uniformity in temperature,composition,and flow within the furnace,preventing the formation of dead zones.The scrap melting rate is a decisive factor in EAF smelting efficiency,largely governed by the coupling of heat and mass transfer.Thus,understanding not only the rapid melting mechanism of scrap but also the impact of arc heat transfer and molten pool stirring is essential to optimizing the smelting process.Advancing research in these areas is critical for shortening the EAF smelting cycle,reducing energy consumption,lowering costs,and improving resource utilization.Therefore,recent achievements and development trends in fundamental research on enhancing EAF smelting efficiency were summarized.
基金supported by the National Natural Science Foundation of China(62341508).
文摘Complex-valued double-sideband direct detection(DD)can reconstruct the optical field and achieve a high electrical spectral efficiency(ESE)comparable to that of a coherent homodyne receiver,and DD does not require a costly local oscillator laser.However,a fundamental question remains if there is an optimal DD receiver structure with the simplest design to approach the performance of the coherent homodyne detection.This study derives the optimal DD receiver structure with an optimal transfer function to recover a quadrature amplitude modulation(QAM)signal with a near-zero guard band at the central frequency of the signal.We derive the theoretical ESE limit for various detection schemes by invoking Shannon’s formula.Our proposed scheme is closest to coherent homodyne detection in terms of the theoretical ESE limit.By leveraging a WaveShaper to construct the optimal transfer function,we conduct a proof-of-concept experiment to transmit a net 228.85-Gb/s 64-QAM signal over an 80-km single-mode fiber with a net ESE of 8.76 b/s/Hz.To the best of our knowledge,this study reports the highest net ESE per polarization per wavelength for DD transmission beyond 40-km single-mode fiber.For a comprehensive metric,denoted as 2ESE×Reach,we achieve the highest 2ESE×Reach per polarization per wavelength for DD transmission.
文摘In the current social environment,the importance of energy conservation and emission reduction is increasing day by day for both the country and its people.Electronic and electrical products,as important items for people’s production and life,require high attention from industry insiders in terms of their energy efficiency testing.Relying on energy efficiency testing can achieve the goal of energy conservation and emission reduction,and related quality control technologies will also inject new momentum into the green development of the industry.This article will discuss the practical strategies of quality control technology for energy efficiency testing of electronic and electrical products based on the significance of such testing,hoping to provide some help.
基金supported by the National Science and Technology Major Project(2011ZX05030)
文摘We derived an equation for saturation in carbonate reservoirs based on the electrical efficiency model in the case of lacking core data. Owing to the complex pore structure and strong heterogeneity in carbonate reservoirs, the relation between electrical efficiency and water porosity is either complex or linear. We proposed an electrical efficiency equation that accounts for the relation between electrical efficiency and water porosity. We also proposed a power-law relation between electrical efficiency and deep-formation resistivity and analyzed the factors controlling the error in the water saturation computations. We concluded that the calculation accuracy of the electrical efficiency is critical to the application of the saturation equation. The saturation equation was applied to the carbonate reservoirs of three wells in Iraq and Indonesia. For relative rock electrical efficiency error below 0.1, the water saturation absolute error is also below 0.1. Therefore, we infer that the proposed saturation equation generally satisfies the evaluation criteria for carbonate reservoirs.
基金supported in part by China Scholarship Council(CSC)under Grant 202206160023.
文摘In this paper,electrically excited synchronous machines(EESMs)using copper(Cu)and aluminum(Al)windings are compared for the feasibility of replacing Cu windings with Al windings in electric vehicle(EV)applications since Al windings have lower mass density and cost per weight,but higher resistivity and lower thermal conductivity than Cu windings.The EESMs with four winding configurations are optimized with an electromagnetic-thermal co-optimization method.The optimized EESM with only Cu windings is considered as the baseline in this study.Results show that the EESM with stator-Cu/rotor-Al windings has the least torque reduction(12.1%)compared to the baseline among the three EESMs with Al windings and the highest torque mass density among all EESMs.Meanwhile,although the new European driving cycle efficiency of the stator-Cu/rotor-Al EESM is 1.8%lower than that of the baseline,the torque per cost is 71%higher,and the maximum rotor mechanical stress is 8%lower.Therefore,the EESMs with stator-Cu/rotor-Al windings are prospective substitutions of those with only Cu windings for EV applications considering the trade-off between performance and cost.
基金supported by Integrated Distribution Network Planning and Operational Enhancement Using Flexibility Domains Under Deep Human-Vehicle-Charger-Road-Grid Coupling(U22B20105).
文摘Thermal storage electric heating(TSEH),as a prevalent variable load resource,offers significant potential for enhancing system flexibility when aggregated into a cluster.To address the uncertainties of renewable energy and load forecasting in active distribution networks(ADN),this paper proposes a multi-timescale coordinated optimal dispatch strategy that incorporates TSEH clusters.It utilizes the thermal storage characteristics and short-term regulation capabilities of TSEH,along with the rapid and gradual response characteristics of resources in active distribution grids,to develop a coordinated optimization dispatch mechanism for day-ahead,intraday,and real-time stages.It provides a coordinated optimized dispatch technique across several timescales for active distribution grids,taking into account the integration of TSEH clusters.The proposed method is validated on a modified IEEE 33-node system.Simulation results demonstrate that the participation of TSEH in collaborative optimization significantly reduces the total system operating cost by 8.71%compared to the scenario without TSEH.This cost reduction is attributed to a 10.84%decrease in interaction costs with the main grid and a 47.41%reduction in network loss costs,validating effective peak shaving and valley filling.The multi-timescale framework further enhances economic efficiency,with overall operating costs progressively decreasing by 3.91%(intraday)and 4.59%(real-time),and interaction costs further reduced by 5.34%and 9.25%,respectively.Moreover,the approach enhances system stability by effectively suppressing node voltage fluctuations and ensuring all voltages remain within safe operating limits during real-time operation.Therefore,the proposed approach achieves rational coordination of diverse resources,significantly improving the economic efficiency and stability of ADNs.
基金supported by the National Natural Science Foundation of China(No.52070057)China Postdoctoral Science Foundation(No.2023M730855)Heilongjiang Postdoctoral Fund(No.LBH-Z22183)for financial support。
文摘Sustainable water,energy and food(WEF)supplies are the bedrock upon which human society depends.Solar-driven interfacial evaporation,combined with electricity generation and cultivation,is a promising approach to mitigate the freshwater,energy and food crises.However,the performance of solar-driven systems decreases significantly during operation due to uncontrollable weather.This study proposes an integrated water/electricity cogeneration-cultivation system with superior thermal management.The energy storage evaporator,consisting of energy storage microcapsules/hydrogel composites,is optimally designed for sustainable desalination,achieving an evaporation rate of around 1.91 kg m^(-2)h^(-1).In the dark,heat released from the phase-change layer supported an evaporation rate of around 0.54kg m^(-2)h^(-1).Reverse electrodialysis harnessed the salinity-gradient energy enhanced during desalination,enabling the long-running WEC system to achieve a power output of~0.3 W m^(-2),which was almost three times higher than that of conventional seawater/surface water mixing.Additionally,an integrated crop irrigation platform utilized system drainage for real-time,on-demand wheat cultivation without secondary contaminants,facilitating seamless WEF integration.This work presents a novel approach to all-day solar water production,electricity generation and crop irrigation,offering a solution and blueprint for the sustainable development of WEF.
基金financially supported by a National Research Foundation of Korea(NRF)grant funded by the Korean government(No.2016R1A3B1908249,RS202400407199).
文摘Although phase-change random-access memory(PCRAM)is a promising next-generation nonvolatile memory technology,challenges remain in terms of reducing energy consumption.This is primarily be-cause the high thermal conductivities of phase-change materials(PCMs)promote Joule heating dissi-pation.Repeated phase transitions also induce long-range atomic diffusion,limiting the durability.To address these challenges,phase-change heterostructure(PCH)devices that incorporate confinement sub-layers based on transition-metal dichalcogenide materials have been developed.In this study,we engi-neered a PCH device by integrating HfTe_(2),which has low thermal conductivity and excellent stability,into the PCM to realize PCRAM with enhanced thermal efficiency and structural stability.HEAT sim-ulations were conducted to validate the superior heat confinement in the programming region of the HfTe_(2)-based PCH device.Moreover,electrical measurements of the device demonstrated its outstanding performance,which was characterized by a low RESET current(∼1.6 mA),stable two-order ON/OFF ratio,and exceptional cycling endurance(∼2×10^(7)).The structural integrity of the HfTe_(2)confinement sub-layer was confirmed using X-ray photoelectron spectroscopy and transmission electron microscopy.The material properties,including electrical conductivity,cohesive energy,and electronegativity,substantiated these findings.Collectively,these results revealed that the HfTe_(2)-based PCH device can achieve significant improvements in performance and reliability compared with conventional PCRAM devices.
基金financially supported by the Nanjing Chervon Auto Precision Technology Co.,Ltd.(Grant No.322040)。
文摘In this study,Al-xSi-0.3Mn-0.3Mg-0.14Fe alloys(x=6.5,7.5,8.5,wt.%)were prepared by super-slow-speed die-casting,and the effects of Si content on the microstructure,mechanical,and thermal/electrical conductivities in as-cast,T5,and T6 states(DIN EN 1706:2020)were investigated.It is found that the increase of Si content in the alloy enhances the formation of eutectic segregation band in the casting surface microstructure.Within the Si content range of 6.5%-8.5%,as a comprehensive evaluation criterion of mechanical properties,the quality index(QI)of 376.1 MPa can be obtained in the as-cast state of the alloy with about 7.5%Si content,373.4 MPa in T5 state of the alloy with 6.5%Si content,and 432.2 MPa in T6 state of the alloy containing 8.5%Si.The heat treatment state significantly affects the thermal conductivity and electrical conductivity of the alloys.The eutectic silicon in the alloy is segemented and further spheroidizaed during the solution process,and the solute atoms of Mg and Si are more adequately precipitated during the aging process.Both of these greatly reduce the probability of electron scattering.Thus,T6 treatment significantly improves the electrical and thermal conductivities.With the increase of Si content,both thermal conductivity and electrical conductivity decrease slightly,demonstrating a strong correlation with the Si content in the alloy.
基金supported by the National Key R&D Program(Grant No.2022YFA1203-100)sponsorship by Shanghai Sailing Program(Grant No.24YF2713800)+2 种基金financial support from the Local College Capacity Building Project of Shanghai Municipal Science and Technology Commission(Grant No.20010500700)the Natural Science Foundation of Shanghai(Grant No.23ZR1424300)Shanghai Shuguang Program(Grant No.22SG56)。
文摘In integrated circuit packaging,thermal interface materials(TIMs)must exhibit high thermal conductivity and electrical resistivity to prevent short circuits,enhance reliability,and ensure safety in high-voltage applications.We proposed the thermal-percolation electrical-resistive TIM incorporating binary fillers of both insulating and metallic nanowires with an orientation in the insulating polymer matrix.High thermal conductivity can be achieved through thermal percolation,while electrical non-conductivity is preserved by carefully controlling the electrical percolation threshold through metallic nanowire orientation.The electrical conductivity of the composite can be further regulated by adjusting the orientation and aspect ratio of the metallic fillers.A thermal conductivity of 10 W·m^(-1)·K^(-1)is achieved,with electrical non-conductive behavior preserved.This approach offers a pathway to realizing“thermal-percolation electrical-resistive”in hybrid TIMs,providing a strategic framework for designing high-performance TIMs.
基金Project(MSV-2013-09)supported by State Key Laboratory of Mechanical System and Vibration,China
文摘Electrical discharge milling(ED-milling) can be a good choice for titanium alloys machining and it was proven that its machining efficiency can be improved to compete with mechanical cutting. In order to improve energy utilization efficiency of ED-milling process, unstable arc discharge and stable arc discharge combined with normal discharge were implemented for material removal by adjusting servo control strategy. The influence of electrode rotating speed and dielectric flushing pressure on machining performance was investigated by experiments. It was found that the rotating of electrode could move the position of discharge plasma channel, and high pressure flushing could wash melted debris out the discharge gap effectively. Both electrode rotating motion and high pressure flushing are contributed to the improvement of machining efficiency.
基金the support from the National Natural Science Foundation of China(52403112,52473083)Natural Science Basic Research Program of Shaanxi(2024JC-TBZC-04)+2 种基金the Innovation Capability Support Program of Shaanxi(2024RS-CXTD-57)Fundamental Research Funds for the Central Universities(D5000240062,D5000240077)Undergraduate Innovation&Business Program in Northwestern Polytechnical University(202410699041)。
文摘High-performance Ti_(3)C_(2)T_(x)fibers have garnered significant potential for smart fibers enabled fabrics.Nonetheless,a major challenge hindering their widespread use is the lack of strong interlayer interactions between Ti_(3)C_(2)T_(x)nanosheets within fibers,which restricts their properties.Herein,a versatile strategy is proposed to construct wet-spun Ti_(3)C_(2)T_(x)fibers,in which trace amounts of borate form strong interlayer crosslinking between Ti_(3)C_(2)T_(x)nanosheets to significantly enhance interactions as supported by density functional theory calculations,thereby reducing interlayer spacing,diminishing microscopic voids and promoting orientation of the nanosheets.The resultant Ti_(3)C_(2)T_(x)fibers exhibit exceptional electrical conductivity of 7781 S cm^(-1)and mechanical properties,including tensile strength of 188.72 MPa and Young's modulus of 52.42 GPa.Notably,employing equilibrium molecular dynamics simulations,finite element analysis,and cross-wire geometry method,it is revealed that such crosslinking also effectively lowers interfacial thermal resistance and ultimately elevates thermal conductivity of Ti_(3)C_(2)T_(x)fibers to 13 W m^(-1)K^(-1),marking the first systematic study on thermal conductivity of Ti_(3)C_(2)T_(x)fibers.The simple and efficient interlayer crosslinking enhancement strategy not only enables the construction of thermal conductivity Ti_(3)C_(2)T_(x)fibers with high electrical conductivity for smart textiles,but also offers a scalable approach for assembling other nanomaterials into multifunctional fibers.
文摘This paper presents experimental results concerning the effect of dielectric type on ozone concentration and the efficiency of its generation in plasma reactor with two mesh electrodes.Three types of dielectric solid were used in the study; glass, micanite and Kapton insulating foil. The experiments were conducted for voltage ranges from 2.3 to 13 k V. A plasma reactor equipped with two 0.3×0.3 mm^2 mesh electrodes made of acid resistant AISI 304 mesh was used in the experiments. The influence of the dielectric type on the concentration and efficiency of ozone generation was described. The resulting maximum concentration of the ozone was about 2.70–9.30 g O3 m^-3, depending on the dielectrics used. The difference between the maximum and the minimum ozone concentration depends on the dielectric used,this accounts for 70% at the variance. The reactor capacity has also been described in the paper; total Ct and dielectric capacitance Cd depending on the dielectric used and its thickness.
基金supported by the National Natural Science Foundation of China(52372013)Natural Science Foundation of Shanghai(22ZR1460600)。
文摘A novel Eu^(3+)-doped fluorapatite red phosphor Ca_(2)Y_(8)(BO_(4))_(2)(SiO_(4))_(4)F_(2)Eu^(3+)with pure phase was synthesized in this study.Density functional theory(DFT)calculation and diffuse reflection spectrum analysis reveal its potential as a matrix for phosphors excited by ultraviolet light.Eu^(3+)has a^(7)F_(0)→^(5)L_(6)transition at 394 nm,and the prepared phosphor exhibits a high emission intensity at 614 nm,which may be attributed to the^(5)D_(0)-^(7)F_(2)energy transition at the lower symmetry site of Eu^(3+).The optimal doping concentration of the phosphor is determined to be 11 mol%,with concentration quenching attributed to the exchange interaction mechanism.The overall color purity of the phosphor is up to 99.88%,with an internal quantum efficiency as high as 91.15%.Notably,Ca_(2)Y_(8)(BO_(4))_(2)(SiO_(4))_(4)F_(2):11 mol%Eu^(3+)(CYBSF:11 mol%Eu^(3+))phosphors exhibit good thermal stability,with a thermal quenching temperature(T1/2)of 552 K and the intensity of emission at 423 K still at 88.89%of that at 298 K.The activation energy of the phosphor is up to 0.30287 eV.Its comprehensive luminescence performance surpasses that of commercial red phosphor,making it suitable for near ultraviolet excited warm white light emitting diode(NUV-WLED)with a high color rendering index(Ra=82)and a correlated color temperature(CCT)of 4339 K.Moreover,the phosphor achieves latent fingerprint visualization and anti-counterfeiting ink on different material surfaces:glass,aluminum foil,plastic and paper.Overall,the fluorapatite CYBSF:11 mol%Eu^(3+)phosphor holds great potential for multimodal applications due to its high quantum efficiency and good thermal stability.
文摘The performance of a 3-phase 6-pole 400 W inverter-drive induction motor was investigated using a variety of non-oriented electrical steels for stator core at PWM inverter fundamental wave frequencies of 30 to 300 Hz. There existed an optimum Si content of the material depending on the tooth flux density. Both reduction of material thickness and stress-relief annealing of the stator core improved the motor efficiency. The influence of Si content on the efficiency was small at lower PWM frequencies, while at higher frequencies the motor efficiency increased with increasing Si content. The Cu loss WC increased and the Fe loss Wi counteractiveiy decreasedwith increasing Si content at lower frequencies; while at higher frequencies Wi had dominant effect on the efficiency. Newly developed materials RMA, having lower Fe losses after stress-relief annealing and higher flux densities with lower Si contents, showed motor efficiencies superior to conventional J1S grade materials with comparable Fe losses.
文摘A three-dimensional approach to the effect of magnetic field incidence angle on electrical power and conversion efficiency is performed on a front-illuminated polycrystalline silicon bifacial solar cell. A solution of the continuity equation allowed us to present the equations of photocurrent density, photovoltage and electric power. The influence of the angle of incidence of the magnetic field on the photocurrent density, the photovoltage and the electric power has been studied. The curves of electrical power versus dynamic junction velocity were used to extract the values of maximum electrical power and dynamic junction velocity and to calculate those of conversion efficiency. From this study, it is found that the conversion efficiency values increase with the angle of incidence of the magnetic field.
基金Projects(21107032,51073072)supported by the National Natural Science Foundation of ChinaProjects(Y406469,Y4110555,Y4100745)supported by Natural Science Foundation of Zhejiang Province,ChinaProjects(2011AY1048-5,2011AY1030)supported by the Science Foundation of Jiaxing Science and Technology Bureau,China
文摘Biodegradable poly （D,L-lactide） （PLA）/carboxyl-functionalized multi-walled carbon nanotubes （c-MWCNTs） composites were achieved via in-situ polymerization. These as-prepared composite materials were characterized with FT-IR, XRD, TG, DSC, SEM, and high insulation resistance meter. The results demonstrate that the multi-walled carbon nanotube was carboxyl functionalized, which improved the collection between c-MWCNTs and PLA, and further realized the graft copolymerization of c-MWCNTs and PLA. There is a higher glass transition temperature and a lower pyrolysis temperature of PLA/c-MWCNTs composites than pure PLA. The c-MWCNTs gave a better dispersion than unmodified MWCNTs in the PLA matrix, and an even coating of PLA on the surface of c-MWCNTs was obtained, which increased the interfacial interaction. High insulation resistance analysis showed that the addition of c-MWCNTs increased the electric conductivity, and c-MWCNTs performed against the large dielectric coefficient and electrostatic state of PLA. These results demonstrated that c-MWCNTs modified PLA composites were beneficial for potential application in the development of heat-resisting and conductivity plastic engineering.
基金Project(U1034002)supported by the National Natural Science Foundation of China(NSFC)-Guangdong Natural Science Mutual Funds
文摘CuCrZr alloys were treated with the thermal stretch process at various temperatures from 100 to 300℃.The results reveal that the thermal stretch process is successfully developed to manufacture the precipitation hardening CuCrZr alloys with a good combination of microhardness and electrical conductivity.By increasing the tensile elongations at each temperature from 100 to 300℃,the microhardness increases whereas the electrical conductivity decreases slightly.Cr-containing precipitate phases with a Nishiyama-Wasserman orientation relationship to the copper matrix were observed by TEM.The achievement of high micro-hardness and acceptable electrical conductivity in the thermal stretch treated alloys is ascribed to the interactions of the heteroatom solution,dislocation increment,grain refinement and dispersive precipitation effect.
文摘A kind of algorithm was provided to resolve the calculating problem of stochastic frontier model and applied to electric power industry.By Matlab,maximum likelihood estimation is adopted to evaluate σ and λ of stochastic frontier model in this paper, then the technical efficiency of electric power companies is calculated. The calculated and analyzed results reflect the situation of the management of electric power industry on the whole,that is ,the electric power companies with high technical efficiency are those which have developed their modern enterprise system successfully.
