This paper introduces an electrical drives control architecture combining a fractional-order controller and a setpoint pre-filter. The former is based on a fractional-order proportional-integral(PI) unit, with a non-i...This paper introduces an electrical drives control architecture combining a fractional-order controller and a setpoint pre-filter. The former is based on a fractional-order proportional-integral(PI) unit, with a non-integer order integral action, while the latter can be of integer or non-integer type. To satisfy robustness and dynamic performance specifications, the feedback controller is designed by a loop-shaping technique in the frequency domain. In particular, optimality of the feedback system is pursued to achieve input-output tracking. The setpoint pre-filter is designed by a dynamic inversion technique minimizing the difference between the ideal synthesized command signal(i.e., a smooth monotonic response) and the prefilter step response. Experimental tests validate the methodology and compare the performance of the proposed architecture with well-established control schemes that employ the classical PIbased symmetrical optimum method with a smoothing pre-filter.展开更多
Multi-functional smart textiles are receiving a lot of attention for their tremendous application devel-opment in the fields of personal thermal management,artificial muscle,electronic skin,and human-machine interacti...Multi-functional smart textiles are receiving a lot of attention for their tremendous application devel-opment in the fields of personal thermal management,artificial muscle,electronic skin,and human-machine interaction.For the complex use of many different smart textiles,designing a multifunctional textile that integrates personal thermal management,smart sensing,and flexible actuating is still a great challenge.Here,we decorated MXene on elastic fabrics by simple dip-coating and asymmetric Ecoflex encapsulation protocol to obtain electrical/optical dual-energy-driven wearable heaters with highly re-sponsive actuating and strain-sensing performance.The MXene fabric-based heaters(MFHs)have high efficiency of Joule heating(Steady state temperature of 116.7℃ at 12 V)and photothermal conversion performance(180.3℃ in 60 s under the near infrared lamp irradiation,up to 57.5℃ under 600 W m^(-2) simulated solar irradiation).Benefiting from high electrical/optical dual-energy conversion efficiency,MFH has a fast photothermal driving effect(bending angle up to 360°in 5 s)due to the different curvature of thermal expansion on both sides of the fabric.Interestingly,MFH has the capability to monitor human strain(such as muscle and joint movements).Based on the above excellent performance,we finally be-lieve that the MFHs have broad application prospects in the fields of all-weather body heat management,health monitoring,thermal health care,and thermal robotics.展开更多
Design and optimization of electrical drive systems often involve simultaneous consideration of multiple objectives that usually contradict to each other and multiple disciplines that normally coupled to each other.Th...Design and optimization of electrical drive systems often involve simultaneous consideration of multiple objectives that usually contradict to each other and multiple disciplines that normally coupled to each other.This paper aims to present efficient system-level multiobjective optimization methods for the multidisciplinary design optimization of electrical drive systems.From the perspective of quality control,deterministic and robust approaches will be investigated for the development of the optimization models for the proposed methods.Meanwhile,two approximation methods,Kriging model and Taylor expansion are employed to decrease the computation/simulation cost.To illustrate the advantages of the proposed methods,a drive system with a permanent magnet synchronous motor driven by a field oriented control system is investigated.Deterministic and robust Pareto optimal solutions are presented and compared in terms of several steady-state and dynamic performances(like average torque and speed overshoot)of the drive system.The robust multiobjective optimization method can produce optimal Pareto solutions with high manufacturing quality for the drive system.展开更多
Permanent magnet synchronous motor based electro-mechanical actuation servo drives have widespread applications in the aviation field,such as unmanned aerial vehicle electric servos,electric cabin doors,and mechanical...Permanent magnet synchronous motor based electro-mechanical actuation servo drives have widespread applications in the aviation field,such as unmanned aerial vehicle electric servos,electric cabin doors,and mechanical arms.The performance of the servo drive,which encompasses the response to the torque,efficiency,control bandwidth and the steady-state positioning accuracy,significantly influences the performance of the aviation actuation.Consequently,enhancing the control bandwidth and refining the positioning accuracy of aviation electro-mechanical actuation servo drives have emerged as a focal point of research.This paper investigates the multi-source disturbances present in aviation electro-mechanical actuation servo systems and summarizes recent research on high-performance servo control methods based on active disturbance rejection control(ADRC).We present a comprehensive overview of the research status pertaining to servo control architecture,strategies for suppressing disturbances in the current loop,and ADRC-based strategies for the position loop.We delineate the research challenges and difficulties encountered by aviation electro-mechanical actuation servo drive control technology.展开更多
1.Opportunities for electric motor drives in the low-altitude economy The implementation plan for the innovative application of general aviation equipment(2024–2030)outlines that by 2027,new general aviation equipmen...1.Opportunities for electric motor drives in the low-altitude economy The implementation plan for the innovative application of general aviation equipment(2024–2030)outlines that by 2027,new general aviation equipment will achieve commercial applications in urban air transport,logistics distribution and emergency rescue.展开更多
This paper deeply discusses the causes of gear howling noise,the identification and analysis of multi-source excitation,the transmission path of dynamic noise,simulation and experimental research,case analysis,optimiz...This paper deeply discusses the causes of gear howling noise,the identification and analysis of multi-source excitation,the transmission path of dynamic noise,simulation and experimental research,case analysis,optimization effect,etc.,aiming to better provide a certain guideline and reference for relevant researchers.展开更多
Distributed drive electric vehicles(DDEVs)endow the ability to improve vehicle stability performance through direct yaw-moment control(DYC).However,the nonlinear characteristics pose a great challenge to vehicle dynam...Distributed drive electric vehicles(DDEVs)endow the ability to improve vehicle stability performance through direct yaw-moment control(DYC).However,the nonlinear characteristics pose a great challenge to vehicle dynamics control.For this purpose,this paper studies the DYC through the Takagi-Sugeno(T-S)fuzzy-based model predictive control to deal with the nonlinear challenge.First,a T-S fuzzy-based vehicle dynamics model is established to describe the time-varying tire cornering stiffness and vehicle speeds,and thus the uncertain parameters can be represented by the norm-bounded uncertainties.Then,a robust model predictive control(MPC)is developed to guarantee vehicle handling stability.A feasible solution can be obtained through a set of linear matrix inequalities(LMIs).Finally,the tests are conducted by the Carsim/Simulink joint platform to verify the proposed method.The comparative results show that the proposed strategy can effectively guarantee the vehicle’s lateral stability while handling the nonlinear challenge.展开更多
Aim Toshorten integral design period of electric vehicles Methods The electric vehicle simulation program(EVSP), a modular user-friendly program which is written in Borland C++ OWL for Windows was developed. Results ...Aim Toshorten integral design period of electric vehicles Methods The electric vehicle simulation program(EVSP), a modular user-friendly program which is written in Borland C++ OWL for Windows was developed. Results EVSP allows simulating the dynamic and the economy performance of electric vehicles.EVSP provides many kinds of data input module,a large components library of electric vehicles and several kinds of speed cycle with these library,it is easily to develop a new concept of different drive trains or even to compare or improve the existing electric vehicles. The paper simulated the performance of YW6120DD Electric Bus, and analyzed the test results comparing with simulation results Conclusion The simulation results indicate that the EVSP may contribute to the developments of electric vehicles in general and the definition of the optimal match management in the drive train in particular.展开更多
For a distributed drive electric vehicle(DDEV)driven by four in-wheel motors,advanced vehicle dynamic control methods can be realized easily because motors can be controlled independently,quickly and precisely.And dir...For a distributed drive electric vehicle(DDEV)driven by four in-wheel motors,advanced vehicle dynamic control methods can be realized easily because motors can be controlled independently,quickly and precisely.And direct yaw-moment control(DYC)has been widely studied and applied to vehicle stability control.Good vehicle handling performance:quick yaw rate transient response,small overshoot,high steady yaw rate gain,etc,is required by drivers under normal conditions,which is less concerned,however.Based on the hierarchical control methodology,a novel control system using direct yaw moment control for improving handling performance of a distributed drive electric vehicle especially under normal driving conditions has been proposed.The upper-loop control system consists of two parts:a state feedback controller,which aims to realize the ideal transient response of yaw rate,with a vehicle sideslip angle observer;and a steering wheel angle feedforward controller designed to achieve a desired yaw rate steady gain.Under the restriction of the effect of poles and zeros in the closed-loop transfer function on the system response and the capacity of in-wheel motors,the integrated time and absolute error(ITAE)function is utilized as the cost function in the optimal control to calculate the ideal eigen frequency and damper coefficient of the system and obtain optimal feedback matrix and feedforward matrix.Simulations and experiments with a DDEV under multiple maneuvers are carried out and show the effectiveness of the proposed method:yaw rate rising time is reduced,steady yaw rate gain is increased,vehicle steering characteristic is close to neutral steer and drivers burdens are also reduced.The control system improves vehicle handling performance under normal conditions in both transient and steady response.State feedback control instead of model following control is introduced in the control system so that the sense of control intervention to drivers is relieved.展开更多
Silicon photonic switches are widely considered as a cost-effective solution for addressing the ever-growing data traffic in datacenter networks,as they offer unique advantages such as low power consumption,low latenc...Silicon photonic switches are widely considered as a cost-effective solution for addressing the ever-growing data traffic in datacenter networks,as they offer unique advantages such as low power consumption,low latency,small footprint and high bandwidth.Despite extensive research efforts,crosstalk in large-scale photonic circuits still poses a threat to signal integrity.In this paper,we present two designs of silicon Mach-Zehnder Interferometer(MZI)switches achieving ultra-low-crosstalk,driven thermally and electrically.Each switch fabric is optimized at both the device and circuit level to suppress crosstalk and reduce system complexity.Notably,for the first time to the best of our knowledge,we harness the inherent self-heating effect in a carrier-injection-based MZI switch to create a pair of phase shifters that offers arbitrary phase differences.Such a pair of phase shifters induces matched insertion loss at each arm,thus minimizing crosstalk.Experimentally,an ultra-low crosstalk ratio below−40 dB is demonstrated for both thermooptic(T-O)and electro-optic(E-O)switches.The T-O switch exhibits an on-chip loss of less than 5 dB with a switching time of 500µs,whereas the E-O switch achieves an on-chip loss as low as 8.5 dB with a switching time of under 100 ns.In addition,data transmission of a 50 Gb/s on–off keying signal is demonstrated with high fidelity on the E-O switch,showing the great potential of the proposed switch designs.展开更多
In this paper,a kind of lateral stability control strategy is put forward about the four wheel independent drive electric vehicle.The design of control system adopts hierarchical structure.Unlike the previous control ...In this paper,a kind of lateral stability control strategy is put forward about the four wheel independent drive electric vehicle.The design of control system adopts hierarchical structure.Unlike the previous control strategy,this paper introduces a method which is the combination of sliding mode control and optimal allocation algorithm.According to the driver’s operation commands(steering angle and speed),the steady state responses of the sideslip angle and yaw rate are obtained.Based on this,the reference model is built.Upper controller adopts the sliding mode control principle to obtain the desired yawing moment demand.Lower controller is designed to satisfy the desired yawing moment demand by optimal allocation of the tire longitudinal forces.Firstly,the optimization goal is built to minimize the actuator cost.Secondly,the weighted least-square method is used to design the tire longitudinal forces optimization distribution strategy under the constraint conditions of actuator and the friction oval.Beyond that,when the optimal allocation algorithm is not applied,a method of axial load ratio distribution is adopted.Finally,Car Sim associated with Simulink simulation experiments are designed under the conditions of different velocities and different pavements.The simulation results show that the control strategy designed in this paper has a good following effect comparing with the reference model and the sideslip angle is controlled within a small rang at the same time.Beyond that,based on the optimal distribution mode,the electromagnetic torque phase of each wheel can follow the trend of the vertical force of the tire,which shows the effectiveness of the optimal distribution algorithm.展开更多
The issues of energy shortage and environmental pollution have accelerated the electrification of construction ma-chinery(CM)industry globally.In China,the amount of electric construction machinery(ECM)has been growin...The issues of energy shortage and environmental pollution have accelerated the electrification of construction ma-chinery(CM)industry globally.In China,the amount of electric construction machinery(ECM)has been growing across the industry.The sales of ECM are estimated to reach 600000 vehicles by the end of 2025,while the total demand for battery power will reach 60 GWh.However,the development of ECM still faces critical challenges including reliable power supply and energy distribution among various components.In this review,we primarily focus on important technological breakthroughs and the difficulties faced by the CM industry in China.An overview of ECM including classification and characteristics is given at the beginning.Next,the selection of key components such as the electric motor and the energy storage units,and the control strategy in the pure electric drive system are discussed.The characteristics of the hybrid electric drive system such as structure design and power matching are analyzed in detail.The battery management system(BMS)is critical to ensure appropriate battery health for reliable power supply.Here,we extensively review technical developments in various BMSs.In addition,we roughly estimate the national total of CM emissions and the potential environmental benefits of employing ECMs in China.Finally,we set out future research directions and industrial development of ECM.展开更多
Framework and basic parameters of a test bench for motor drive system of electric vehicle (EV) are illuminated. Two kinds of electric drive models, one was for the electric vehicle drived on real road, the other was f...Framework and basic parameters of a test bench for motor drive system of electric vehicle (EV) are illuminated. Two kinds of electric drive models, one was for the electric vehicle drived on real road, the other was for that on test bench, are put forward. Then, dynamic analysis of these models is made in detail. Inertia matching method of the test bench is researched and some useful formulas and graphs are brought forward. The experiment of an electric bus is introduced in order to explain the usage of this inertia matching method.展开更多
The current match method of electric powertrain still makes use of longitudinal dynamics, which can’t realize maximum capacity for on-board energy storage unit and can’t reach lowest equivalent fuel consumption as w...The current match method of electric powertrain still makes use of longitudinal dynamics, which can’t realize maximum capacity for on-board energy storage unit and can’t reach lowest equivalent fuel consumption as well. Another match method focuses on improving available space considering reasonable layout of vehicle to enlarge rated energy capacity for on-board energy storage unit, which can keep the longitudinal dynamics performance almost unchanged but can’t reach lowest fuel consumption. Considering the characteristics of driving motor, method of electric powertrain matching utilizing conventional longitudinal dynamics for driving system and cut-and-try method for energy storage system is proposed for passenger cars converted from traditional ones. Through combining the utilization of vehicle space which contributes to the on-board energy amount, vehicle longitudinal performance requirements, vehicle equivalent fuel consumption level, passive safety requirements and maximum driving range requirement together, a comprehensive optimal match method of electric powertrain for battery-powered electric vehicle is raised. In simulation, the vehicle model and match method is built in Matlab/simulink, and the Environmental Protection Agency (EPA) Urban Dynamometer Driving Schedule (UDDS) is chosen as a test condition. The simulation results show that 2.62% of regenerative energy and 2% of energy storage efficiency are increased relative to the traditional method. The research conclusions provide theoretical and practical solutions for electric powertrain matching for modern battery-powered electric vehicles especially for those converted from traditional ones, and further enhance dynamics of electric vehicles.展开更多
To diagnose the Open-Circuit(OC)fault in the novel fault-tolerant electric drive system,based on d-q-axis current signal,a strong robustness diagnosis strategy is proposed and investigated.Fewer independent power supp...To diagnose the Open-Circuit(OC)fault in the novel fault-tolerant electric drive system,based on d-q-axis current signal,a strong robustness diagnosis strategy is proposed and investigated.Fewer independent power supplies and converters are required in the novel fault-tolerant electric drive system based on Dual-Winding Permanent Magnet Motor(DWPMM),and the system’s reliability,usage ratio and power density have been improved compared to the conventional fault-tolerant motor drive system.However,the novel fault-tolerant electric drive system has the OC fault diagnostic false alarms issue when load changes suddenly or under light-load condition.And it lacks the research on the diagnostic method when the system encounters intermittent OC fault in power switches.By theory derivation,simulation and experimental verification,it can be concluded that the proposed strong robustness OC fault diagnosis strategy based on d-q-axis current signal can overcome the OC fault diagnostic false alarms issue when load changes suddenly or under light-load condition.And it can detect and locate the OC fault of single-phase winding in real time,and diagnose the intermittent OC fault of power switches.展开更多
Model predictive controls(MPCs)with the merits of non-linear multi-variable control can achieve better performance than other commonly used control methods for permanent magnet synchronous motor(PMSM)drives.However,th...Model predictive controls(MPCs)with the merits of non-linear multi-variable control can achieve better performance than other commonly used control methods for permanent magnet synchronous motor(PMSM)drives.However,the conventional MPCs have various issues,including unsatisfactory steady-state performance,variable switching frequency,and difficult selection of appropriate weighting factors.This paper proposes two different improved MPC methods to deal with these issues.One method is the two-vector dimensionless model predictive torque control(MPTC).Two cost functions(torque and flux)and fuzzy decision-making are used to eliminate the weighting factor and select the first optimum vector.The torque cost function selects a second vector whose duty cycle is determined based on the torque error.The other method is the two-vector dimensionless model predictive current control(MPCC).The first vector is selected the same as in the conventional MPC method.Two separate current cost functions and fuzzy decision-making are used to select the second vector whose duty cycle is determined based on the current error.Both proposed methods utilize the space vector PWM modulator to regulate the switching frequency.Numerical simulation results show that the proposed methods have better steady-state and transient performances than the conventional MPCs and other existing improved MPCs.展开更多
High-speed Brushless DC Motors(BLDCMs)usually adopt a sensorless control strategy and operate in three-phase six-state drive mode.However,the sampling errors of the rotor position and the driving method increase the I...High-speed Brushless DC Motors(BLDCMs)usually adopt a sensorless control strategy and operate in three-phase six-state drive mode.However,the sampling errors of the rotor position and the driving method increase the Internal Power Angle(IPA),resulting in a decrease in the efficiency of the system.Conventional IPA reduction strategies are either sensitive to motor parameters,or ignore diode freewheeling during the commutation process,or require additional current sensors.In this paper,a new strategy to reduce the IPA is proposed.Firstly,a Zero-Crossing Point(ZCP)detection method for the back-EMF without filter is proposed to reduce the sampling errors of the rotor position.Secondly,the relationship between the non-energized terminal voltage and the ZCP of the corresponding back-EMF is analyzed.The non-energized terminal voltage that has completed the diode freewheeling is divided into two triangles by half of the bus voltage.When the IPA is suppressed,the areas of the two triangles are equal.Thirdly,an advanced angle for reducing the IPA is obtained through a PI regulator which can eliminate the deviation between the two areas.Finally,both a simulation model and an experimental circuit are built to verify the proposed control strategy.展开更多
In order to improve the brake performance of a dual independent electric drive tracked vehicle,a dynamic model for braking situation was established.Then,a sliding model controller(SMC)with an auxiliary system was des...In order to improve the brake performance of a dual independent electric drive tracked vehicle,a dynamic model for braking situation was established.Then,a sliding model controller(SMC)with an auxiliary system was designed to control the slip and its effectiveness was proved.A hardware-in-loop simulation through MATLAB/XPC was compared with the normal SMC and normal integral sliding mode controller(ISMC),the results show that SMC with the auxiliary system has a better performance:a smaller overshoot and steady state error.The disturbance is suppressed effectively.In the initial speed of 65.km/h,the brake distance was shortened by 3.4%and 6.8%compared with the other two methods,respectively.Finally,initial speeds of 30-36.km/h tests was carried out on a flat soil road.Compared with a no-control brake,the displacement was shortened by 1.8.m.It demonstrates the effectiveness of the slip-control strategy.In the same situation,the error between the simulation and test is 18.1%,which validates the accuracy of models.展开更多
The torque ripples resulting from external electromagnetic excitation and mechanical internal excitation contribute to significant torsional vibration issues within electromechanical coupling systems.To mitigate these...The torque ripples resulting from external electromagnetic excitation and mechanical internal excitation contribute to significant torsional vibration issues within electromechanical coupling systems.To mitigate these fluctuations,a passive control strategy centered around a multi-stable nonlinear energy sink(MNES)is proposed.First,models for electromagnetic torque,gear nonlinear meshing torque,and misalignment torque are established.Building upon this foundation,an electromechanical coupling dynamic model of the electric drive system is formulated.Sensitivity analysis is conducted to determine the sensitive nodes of each mode and to provide guidance for the installation of the MNES.The structure of the MNES is introduced,and an electromechanical coupling dynamic model with the MNES is established.Based on this model,the influence of the misaligned angle on the electromechanical coupling characteristics is analyzed.In addition,the vibration suppression performance of the MNES is studied under both speed and uniform speed conditions.Finally,experimental testing is conducted to verify the vibration suppression performance of the MNES.The results indicate that misalignment triggers the emergence of its characteristic frequencies and associated sidebands.Meanwhile,the MNES effectively mitigates the torsional vibrations in the coupled system,demonstrating suppression rates of 52.69%in simulations and 63.3%in experiments.展开更多
Accurate estimation of sideslip angle and vehicle velocity is crucial for effective control of distributed drive electric vehicles.However,as these states are not directly measured,Kalman-based approaches utilizing in...Accurate estimation of sideslip angle and vehicle velocity is crucial for effective control of distributed drive electric vehicles.However,as these states are not directly measured,Kalman-based approaches utilizing in-vehicle sensors have been developed to estimate them.Unfortunately,existing methods tend to ignore the impact of data loss on estimation performance.Furthermore,the process noise,which changes dynamically due to varying driving conditions,is not adequately considered.In response to these constraints,we propose a novel method called the fuzzy adaptive fault-tolerant extended Kalman filter(FAFTEKF).Initially,a fault-tolerant EKF is devised to handle missing measurements.Additionally,a fuzzy logic system that dynamically updates the process noise matrix,is built to improve estimation accuracy under different driving conditions.Extensive experimental results validate the superiority of the FAFTEKF over the traditional EKF across various scenarios with different degrees of data loss.展开更多
基金partially supported by the Australian Research Council(DP160104994)
文摘This paper introduces an electrical drives control architecture combining a fractional-order controller and a setpoint pre-filter. The former is based on a fractional-order proportional-integral(PI) unit, with a non-integer order integral action, while the latter can be of integer or non-integer type. To satisfy robustness and dynamic performance specifications, the feedback controller is designed by a loop-shaping technique in the frequency domain. In particular, optimality of the feedback system is pursued to achieve input-output tracking. The setpoint pre-filter is designed by a dynamic inversion technique minimizing the difference between the ideal synthesized command signal(i.e., a smooth monotonic response) and the prefilter step response. Experimental tests validate the methodology and compare the performance of the proposed architecture with well-established control schemes that employ the classical PIbased symmetrical optimum method with a smoothing pre-filter.
基金the Key Research and Development Program of the Science and Technology Bureau of Ningbo City(Grant No.2023Z082)supported by the Major scientific and technologic project of Fuzhou Science and Technology Project Plan(No.2022-ZD-007)+2 种基金by the Jiangxi Provincial Administration for Market Regulation(No.GSJK202221)by the Natural Science Foundation Project of Shanghai“science and technology innovation action plan”(Nos.20ZR1400200 and 22ZR1400500)supported by Project(No.Grant52173218)supported by the National Natural Science Foundation of China,and funded by Shanghai Frontiers Science Center of Advanced Textiles.
文摘Multi-functional smart textiles are receiving a lot of attention for their tremendous application devel-opment in the fields of personal thermal management,artificial muscle,electronic skin,and human-machine interaction.For the complex use of many different smart textiles,designing a multifunctional textile that integrates personal thermal management,smart sensing,and flexible actuating is still a great challenge.Here,we decorated MXene on elastic fabrics by simple dip-coating and asymmetric Ecoflex encapsulation protocol to obtain electrical/optical dual-energy-driven wearable heaters with highly re-sponsive actuating and strain-sensing performance.The MXene fabric-based heaters(MFHs)have high efficiency of Joule heating(Steady state temperature of 116.7℃ at 12 V)and photothermal conversion performance(180.3℃ in 60 s under the near infrared lamp irradiation,up to 57.5℃ under 600 W m^(-2) simulated solar irradiation).Benefiting from high electrical/optical dual-energy conversion efficiency,MFH has a fast photothermal driving effect(bending angle up to 360°in 5 s)due to the different curvature of thermal expansion on both sides of the fabric.Interestingly,MFH has the capability to monitor human strain(such as muscle and joint movements).Based on the above excellent performance,we finally be-lieve that the MFHs have broad application prospects in the fields of all-weather body heat management,health monitoring,thermal health care,and thermal robotics.
文摘Design and optimization of electrical drive systems often involve simultaneous consideration of multiple objectives that usually contradict to each other and multiple disciplines that normally coupled to each other.This paper aims to present efficient system-level multiobjective optimization methods for the multidisciplinary design optimization of electrical drive systems.From the perspective of quality control,deterministic and robust approaches will be investigated for the development of the optimization models for the proposed methods.Meanwhile,two approximation methods,Kriging model and Taylor expansion are employed to decrease the computation/simulation cost.To illustrate the advantages of the proposed methods,a drive system with a permanent magnet synchronous motor driven by a field oriented control system is investigated.Deterministic and robust Pareto optimal solutions are presented and compared in terms of several steady-state and dynamic performances(like average torque and speed overshoot)of the drive system.The robust multiobjective optimization method can produce optimal Pareto solutions with high manufacturing quality for the drive system.
基金supported by the National Natural Science Foundation of China(Nos.52177059 and 52407064).
文摘Permanent magnet synchronous motor based electro-mechanical actuation servo drives have widespread applications in the aviation field,such as unmanned aerial vehicle electric servos,electric cabin doors,and mechanical arms.The performance of the servo drive,which encompasses the response to the torque,efficiency,control bandwidth and the steady-state positioning accuracy,significantly influences the performance of the aviation actuation.Consequently,enhancing the control bandwidth and refining the positioning accuracy of aviation electro-mechanical actuation servo drives have emerged as a focal point of research.This paper investigates the multi-source disturbances present in aviation electro-mechanical actuation servo systems and summarizes recent research on high-performance servo control methods based on active disturbance rejection control(ADRC).We present a comprehensive overview of the research status pertaining to servo control architecture,strategies for suppressing disturbances in the current loop,and ADRC-based strategies for the position loop.We delineate the research challenges and difficulties encountered by aviation electro-mechanical actuation servo drive control technology.
基金supported by the National Natural Science Foundation of China(No.52407064)。
文摘1.Opportunities for electric motor drives in the low-altitude economy The implementation plan for the innovative application of general aviation equipment(2024–2030)outlines that by 2027,new general aviation equipment will achieve commercial applications in urban air transport,logistics distribution and emergency rescue.
文摘This paper deeply discusses the causes of gear howling noise,the identification and analysis of multi-source excitation,the transmission path of dynamic noise,simulation and experimental research,case analysis,optimization effect,etc.,aiming to better provide a certain guideline and reference for relevant researchers.
基金Supported by National Natural Science Foundation of China(Grant Nos.52402497,52025121 and 52002066)Young Scientists Project and General Project of Applied Basic Research in Yunnan Province(Grant Nos.202501AT070296,202401AU070196)+1 种基金The Key Laboratory of Modern Agricultural Engineering of Ordinary Colleges and Universities of Education Department of Autonomous Region(Grant No.TDNG2023108)Jiangsu Provincial Achievements Transformation Project(Grant No.BA2018023).
文摘Distributed drive electric vehicles(DDEVs)endow the ability to improve vehicle stability performance through direct yaw-moment control(DYC).However,the nonlinear characteristics pose a great challenge to vehicle dynamics control.For this purpose,this paper studies the DYC through the Takagi-Sugeno(T-S)fuzzy-based model predictive control to deal with the nonlinear challenge.First,a T-S fuzzy-based vehicle dynamics model is established to describe the time-varying tire cornering stiffness and vehicle speeds,and thus the uncertain parameters can be represented by the norm-bounded uncertainties.Then,a robust model predictive control(MPC)is developed to guarantee vehicle handling stability.A feasible solution can be obtained through a set of linear matrix inequalities(LMIs).Finally,the tests are conducted by the Carsim/Simulink joint platform to verify the proposed method.The comparative results show that the proposed strategy can effectively guarantee the vehicle’s lateral stability while handling the nonlinear challenge.
文摘Aim Toshorten integral design period of electric vehicles Methods The electric vehicle simulation program(EVSP), a modular user-friendly program which is written in Borland C++ OWL for Windows was developed. Results EVSP allows simulating the dynamic and the economy performance of electric vehicles.EVSP provides many kinds of data input module,a large components library of electric vehicles and several kinds of speed cycle with these library,it is easily to develop a new concept of different drive trains or even to compare or improve the existing electric vehicles. The paper simulated the performance of YW6120DD Electric Bus, and analyzed the test results comparing with simulation results Conclusion The simulation results indicate that the EVSP may contribute to the developments of electric vehicles in general and the definition of the optimal match management in the drive train in particular.
基金Supported by National Basic Research Program of China(973 Program,Grant No.2011CB711200)National Science and Technology Support Program of China(Grant No.2015BAG17B00)National Natural Science Foundation of China(Grant No.51475333)
文摘For a distributed drive electric vehicle(DDEV)driven by four in-wheel motors,advanced vehicle dynamic control methods can be realized easily because motors can be controlled independently,quickly and precisely.And direct yaw-moment control(DYC)has been widely studied and applied to vehicle stability control.Good vehicle handling performance:quick yaw rate transient response,small overshoot,high steady yaw rate gain,etc,is required by drivers under normal conditions,which is less concerned,however.Based on the hierarchical control methodology,a novel control system using direct yaw moment control for improving handling performance of a distributed drive electric vehicle especially under normal driving conditions has been proposed.The upper-loop control system consists of two parts:a state feedback controller,which aims to realize the ideal transient response of yaw rate,with a vehicle sideslip angle observer;and a steering wheel angle feedforward controller designed to achieve a desired yaw rate steady gain.Under the restriction of the effect of poles and zeros in the closed-loop transfer function on the system response and the capacity of in-wheel motors,the integrated time and absolute error(ITAE)function is utilized as the cost function in the optimal control to calculate the ideal eigen frequency and damper coefficient of the system and obtain optimal feedback matrix and feedforward matrix.Simulations and experiments with a DDEV under multiple maneuvers are carried out and show the effectiveness of the proposed method:yaw rate rising time is reduced,steady yaw rate gain is increased,vehicle steering characteristic is close to neutral steer and drivers burdens are also reduced.The control system improves vehicle handling performance under normal conditions in both transient and steady response.State feedback control instead of model following control is introduced in the control system so that the sense of control intervention to drivers is relieved.
基金supported by the UK EPSRC Programme Grant QUDOS(EP/T028475/1)TRANSNET(EP/R035342/1)+3 种基金Communication Hub TITAN(EP/X04047X/1 and EP/Y037243/1)UK EPSRC CEPS CDT(EP/S022139/1)the European Union’s Horizon Europe Research and Innovation Program under Agreement 101070560(PUNCH)the European Union’s Horizon 2020 research and innovation program,project INSPIRE(101017088).
文摘Silicon photonic switches are widely considered as a cost-effective solution for addressing the ever-growing data traffic in datacenter networks,as they offer unique advantages such as low power consumption,low latency,small footprint and high bandwidth.Despite extensive research efforts,crosstalk in large-scale photonic circuits still poses a threat to signal integrity.In this paper,we present two designs of silicon Mach-Zehnder Interferometer(MZI)switches achieving ultra-low-crosstalk,driven thermally and electrically.Each switch fabric is optimized at both the device and circuit level to suppress crosstalk and reduce system complexity.Notably,for the first time to the best of our knowledge,we harness the inherent self-heating effect in a carrier-injection-based MZI switch to create a pair of phase shifters that offers arbitrary phase differences.Such a pair of phase shifters induces matched insertion loss at each arm,thus minimizing crosstalk.Experimentally,an ultra-low crosstalk ratio below−40 dB is demonstrated for both thermooptic(T-O)and electro-optic(E-O)switches.The T-O switch exhibits an on-chip loss of less than 5 dB with a switching time of 500µs,whereas the E-O switch achieves an on-chip loss as low as 8.5 dB with a switching time of under 100 ns.In addition,data transmission of a 50 Gb/s on–off keying signal is demonstrated with high fidelity on the E-O switch,showing the great potential of the proposed switch designs.
基金supported by the National Nature Science Foundation(U1664263)National Key R&D Program of China(2016YFB0101102)。
文摘In this paper,a kind of lateral stability control strategy is put forward about the four wheel independent drive electric vehicle.The design of control system adopts hierarchical structure.Unlike the previous control strategy,this paper introduces a method which is the combination of sliding mode control and optimal allocation algorithm.According to the driver’s operation commands(steering angle and speed),the steady state responses of the sideslip angle and yaw rate are obtained.Based on this,the reference model is built.Upper controller adopts the sliding mode control principle to obtain the desired yawing moment demand.Lower controller is designed to satisfy the desired yawing moment demand by optimal allocation of the tire longitudinal forces.Firstly,the optimization goal is built to minimize the actuator cost.Secondly,the weighted least-square method is used to design the tire longitudinal forces optimization distribution strategy under the constraint conditions of actuator and the friction oval.Beyond that,when the optimal allocation algorithm is not applied,a method of axial load ratio distribution is adopted.Finally,Car Sim associated with Simulink simulation experiments are designed under the conditions of different velocities and different pavements.The simulation results show that the control strategy designed in this paper has a good following effect comparing with the reference model and the sideslip angle is controlled within a small rang at the same time.Beyond that,based on the optimal distribution mode,the electromagnetic torque phase of each wheel can follow the trend of the vertical force of the tire,which shows the effectiveness of the optimal distribution algorithm.
基金Project supported by the National Key R&D Program of China(No.2019YFB2004604)the National Natural Science Foundation of China(Nos.52075481 and 52075477)+2 种基金the Zhejiang Provincial Natural Science Foundation of China(No.LR19E050002)the Key R&D Program of Zhejiang Province(No.2020C01152)and the“Innovation 2025”Major Project of Ningbo(No.2020Z110),China。
文摘The issues of energy shortage and environmental pollution have accelerated the electrification of construction ma-chinery(CM)industry globally.In China,the amount of electric construction machinery(ECM)has been growing across the industry.The sales of ECM are estimated to reach 600000 vehicles by the end of 2025,while the total demand for battery power will reach 60 GWh.However,the development of ECM still faces critical challenges including reliable power supply and energy distribution among various components.In this review,we primarily focus on important technological breakthroughs and the difficulties faced by the CM industry in China.An overview of ECM including classification and characteristics is given at the beginning.Next,the selection of key components such as the electric motor and the energy storage units,and the control strategy in the pure electric drive system are discussed.The characteristics of the hybrid electric drive system such as structure design and power matching are analyzed in detail.The battery management system(BMS)is critical to ensure appropriate battery health for reliable power supply.Here,we extensively review technical developments in various BMSs.In addition,we roughly estimate the national total of CM emissions and the potential environmental benefits of employing ECMs in China.Finally,we set out future research directions and industrial development of ECM.
文摘Framework and basic parameters of a test bench for motor drive system of electric vehicle (EV) are illuminated. Two kinds of electric drive models, one was for the electric vehicle drived on real road, the other was for that on test bench, are put forward. Then, dynamic analysis of these models is made in detail. Inertia matching method of the test bench is researched and some useful formulas and graphs are brought forward. The experiment of an electric bus is introduced in order to explain the usage of this inertia matching method.
基金supported by National Basic Research Program of China(973 Program, Grant No. 2011CB711200)National Natural Science Foundation of China (Grant No. 51105278)
文摘The current match method of electric powertrain still makes use of longitudinal dynamics, which can’t realize maximum capacity for on-board energy storage unit and can’t reach lowest equivalent fuel consumption as well. Another match method focuses on improving available space considering reasonable layout of vehicle to enlarge rated energy capacity for on-board energy storage unit, which can keep the longitudinal dynamics performance almost unchanged but can’t reach lowest fuel consumption. Considering the characteristics of driving motor, method of electric powertrain matching utilizing conventional longitudinal dynamics for driving system and cut-and-try method for energy storage system is proposed for passenger cars converted from traditional ones. Through combining the utilization of vehicle space which contributes to the on-board energy amount, vehicle longitudinal performance requirements, vehicle equivalent fuel consumption level, passive safety requirements and maximum driving range requirement together, a comprehensive optimal match method of electric powertrain for battery-powered electric vehicle is raised. In simulation, the vehicle model and match method is built in Matlab/simulink, and the Environmental Protection Agency (EPA) Urban Dynamometer Driving Schedule (UDDS) is chosen as a test condition. The simulation results show that 2.62% of regenerative energy and 2% of energy storage efficiency are increased relative to the traditional method. The research conclusions provide theoretical and practical solutions for electric powertrain matching for modern battery-powered electric vehicles especially for those converted from traditional ones, and further enhance dynamics of electric vehicles.
基金supported by the National Natural Science Foundation of China(No.51807094)China Postdoctoral Science Foundation(No.2020M671499)+2 种基金Program for HighLevel Entrepreneurial and Innovative Talents Introduction of Jiangsu Province,China(No.[2019]20)Aeronautical Science Foundation of China(No.20200028059001)Jiangsu Planned Projects for Postdoctoral Research Funds,China(No.2020Z145)。
文摘To diagnose the Open-Circuit(OC)fault in the novel fault-tolerant electric drive system,based on d-q-axis current signal,a strong robustness diagnosis strategy is proposed and investigated.Fewer independent power supplies and converters are required in the novel fault-tolerant electric drive system based on Dual-Winding Permanent Magnet Motor(DWPMM),and the system’s reliability,usage ratio and power density have been improved compared to the conventional fault-tolerant motor drive system.However,the novel fault-tolerant electric drive system has the OC fault diagnostic false alarms issue when load changes suddenly or under light-load condition.And it lacks the research on the diagnostic method when the system encounters intermittent OC fault in power switches.By theory derivation,simulation and experimental verification,it can be concluded that the proposed strong robustness OC fault diagnosis strategy based on d-q-axis current signal can overcome the OC fault diagnostic false alarms issue when load changes suddenly or under light-load condition.And it can detect and locate the OC fault of single-phase winding in real time,and diagnose the intermittent OC fault of power switches.
文摘Model predictive controls(MPCs)with the merits of non-linear multi-variable control can achieve better performance than other commonly used control methods for permanent magnet synchronous motor(PMSM)drives.However,the conventional MPCs have various issues,including unsatisfactory steady-state performance,variable switching frequency,and difficult selection of appropriate weighting factors.This paper proposes two different improved MPC methods to deal with these issues.One method is the two-vector dimensionless model predictive torque control(MPTC).Two cost functions(torque and flux)and fuzzy decision-making are used to eliminate the weighting factor and select the first optimum vector.The torque cost function selects a second vector whose duty cycle is determined based on the torque error.The other method is the two-vector dimensionless model predictive current control(MPCC).The first vector is selected the same as in the conventional MPC method.Two separate current cost functions and fuzzy decision-making are used to select the second vector whose duty cycle is determined based on the current error.Both proposed methods utilize the space vector PWM modulator to regulate the switching frequency.Numerical simulation results show that the proposed methods have better steady-state and transient performances than the conventional MPCs and other existing improved MPCs.
基金supported by the National Natural Science Foundation of China(No.51877006)the Key R&D Program of Shaanxi Province,China(No.2021GY-340 and 2020GY-140)the Aeronautical Science Foundation of China(No.20181953020)。
文摘High-speed Brushless DC Motors(BLDCMs)usually adopt a sensorless control strategy and operate in three-phase six-state drive mode.However,the sampling errors of the rotor position and the driving method increase the Internal Power Angle(IPA),resulting in a decrease in the efficiency of the system.Conventional IPA reduction strategies are either sensitive to motor parameters,or ignore diode freewheeling during the commutation process,or require additional current sensors.In this paper,a new strategy to reduce the IPA is proposed.Firstly,a Zero-Crossing Point(ZCP)detection method for the back-EMF without filter is proposed to reduce the sampling errors of the rotor position.Secondly,the relationship between the non-energized terminal voltage and the ZCP of the corresponding back-EMF is analyzed.The non-energized terminal voltage that has completed the diode freewheeling is divided into two triangles by half of the bus voltage.When the IPA is suppressed,the areas of the two triangles are equal.Thirdly,an advanced angle for reducing the IPA is obtained through a PI regulator which can eliminate the deviation between the two areas.Finally,both a simulation model and an experimental circuit are built to verify the proposed control strategy.
文摘In order to improve the brake performance of a dual independent electric drive tracked vehicle,a dynamic model for braking situation was established.Then,a sliding model controller(SMC)with an auxiliary system was designed to control the slip and its effectiveness was proved.A hardware-in-loop simulation through MATLAB/XPC was compared with the normal SMC and normal integral sliding mode controller(ISMC),the results show that SMC with the auxiliary system has a better performance:a smaller overshoot and steady state error.The disturbance is suppressed effectively.In the initial speed of 65.km/h,the brake distance was shortened by 3.4%and 6.8%compared with the other two methods,respectively.Finally,initial speeds of 30-36.km/h tests was carried out on a flat soil road.Compared with a no-control brake,the displacement was shortened by 1.8.m.It demonstrates the effectiveness of the slip-control strategy.In the same situation,the error between the simulation and test is 18.1%,which validates the accuracy of models.
基金Project supported by the National Natural Science Foundation of China(Nos.52075084 and 52475094)the Fundamental Research Funds for the Central Universities of China(No.N2303005)。
文摘The torque ripples resulting from external electromagnetic excitation and mechanical internal excitation contribute to significant torsional vibration issues within electromechanical coupling systems.To mitigate these fluctuations,a passive control strategy centered around a multi-stable nonlinear energy sink(MNES)is proposed.First,models for electromagnetic torque,gear nonlinear meshing torque,and misalignment torque are established.Building upon this foundation,an electromechanical coupling dynamic model of the electric drive system is formulated.Sensitivity analysis is conducted to determine the sensitive nodes of each mode and to provide guidance for the installation of the MNES.The structure of the MNES is introduced,and an electromechanical coupling dynamic model with the MNES is established.Based on this model,the influence of the misaligned angle on the electromechanical coupling characteristics is analyzed.In addition,the vibration suppression performance of the MNES is studied under both speed and uniform speed conditions.Finally,experimental testing is conducted to verify the vibration suppression performance of the MNES.The results indicate that misalignment triggers the emergence of its characteristic frequencies and associated sidebands.Meanwhile,the MNES effectively mitigates the torsional vibrations in the coupled system,demonstrating suppression rates of 52.69%in simulations and 63.3%in experiments.
基金Supported by National Natural Science Foundation of China(Grant No.52402482).
文摘Accurate estimation of sideslip angle and vehicle velocity is crucial for effective control of distributed drive electric vehicles.However,as these states are not directly measured,Kalman-based approaches utilizing in-vehicle sensors have been developed to estimate them.Unfortunately,existing methods tend to ignore the impact of data loss on estimation performance.Furthermore,the process noise,which changes dynamically due to varying driving conditions,is not adequately considered.In response to these constraints,we propose a novel method called the fuzzy adaptive fault-tolerant extended Kalman filter(FAFTEKF).Initially,a fault-tolerant EKF is devised to handle missing measurements.Additionally,a fuzzy logic system that dynamically updates the process noise matrix,is built to improve estimation accuracy under different driving conditions.Extensive experimental results validate the superiority of the FAFTEKF over the traditional EKF across various scenarios with different degrees of data loss.
