An analytical method was proposed to solve the mechanical problems of stamping a thin strip on an elastic foundation. The thin strip was divided into four parts according to its deformation and contact with the punch ...An analytical method was proposed to solve the mechanical problems of stamping a thin strip on an elastic foundation. The thin strip was divided into four parts according to its deformation and contact with the punch and the elastic foundation, especially an elastic-plastic part was considered in the deflection of the thin strip. Analytical solutions were derived individually for each part and two models were established with the help of elastic and plastic large deflection theories. Compatibility conditions between the neighboring parts of the thin strip constructed the non-linear equation group. Solutions were carried out by programming with a software. The deformation shape, the membrane force, and the moment and shear force of the deformed thin strip were obtained. The results of the two models were compared. The study shows that the method is effective.展开更多
In this study,a straightforward one-step hydrothermal method was successfully utilized to synthesize the solid solution Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)-Na_(2)Ni_(2)Ti_(6)O_(16)(NNMTO-x),where x denotes the molar perce...In this study,a straightforward one-step hydrothermal method was successfully utilized to synthesize the solid solution Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)-Na_(2)Ni_(2)Ti_(6)O_(16)(NNMTO-x),where x denotes the molar percentage of Na_(2)Ni_(2)Ti_(6)O_(16)(NNTO)within Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)(NMTO),with x values of 10,20,30,40,and 50.Both XPS(X-ray Photoelectron Spectroscopy)and EDX(Energy Dispersive X-ray Spectroscopy)analyses unequivocally validated the formation of the NNMTO-x solid solutions.It was observed that when x is below 40,the NNMTO-x solid solution retains the structural characteristics of the original NMTO.However,beyond this threshold,significant alterations in crystal morphology were noted,accompanied by a noticeable decline in photocatalytic activity.Notably,the absorption edge of NNMTO-x(x<40)exhibited a shift towards the visible-light spectrum,thereby substantially broadening the absorption range.The findings highlight that NNMTO-30 possesses the most pronounced photocatalytic activity for the reduction of CO_(2).Specifically,after a 6 h irradiation period,the production rates of CO and CH_(4)were recorded at 42.38 and 1.47μmol/g,respectively.This investigation provides pivotal insights that are instrumental in the advancement of highly efficient and stable photocatalysts tailored for CO_(2)reduction processes.展开更多
Let A be a 3×3 singular or diagonalizable matrix,all solutions to the Yang-Baxter-like matrix equation have been determined.However,finding all solutions for full rank,non-diagonalizable matrices remains challeng...Let A be a 3×3 singular or diagonalizable matrix,all solutions to the Yang-Baxter-like matrix equation have been determined.However,finding all solutions for full rank,non-diagonalizable matrices remains challenging.By utilizing classification techniques,we establish all solutions of the Yang-Baxter-like matrix equation in this paper when the coefficient matrix A is similar to non-diagonalizable matrix diag(λ,J_(2)(λ))withλ̸=0.More specifically,we divide the non-diagonal elements of the solution into 10 different cases.By discussing each situation,we establish all solutions of the Yang-Baxter-like matrix equation.The results of this work enrich the existing ones.展开更多
This paper is concerned with an initial boundary value problem for the planar magnetohydrodynamic compressible flow with temperature dependent heat conductivity in a half-line.In particular,the transverse magnetic fie...This paper is concerned with an initial boundary value problem for the planar magnetohydrodynamic compressible flow with temperature dependent heat conductivity in a half-line.In particular,the transverse magnetic field is assumed to satisfy the Neumann boundary condition,which was first investigated by Kazhikhov in 1987.We establish the global existence of the unique strong solutions to the MHD equations without any smallness conditions on the initial data.More precisely,our result can be regarded as a natural generalization of Kazhikov’s result for applying the constant heat-conductivity in bounded domains to the degenerate case in unbounded domains.展开更多
In this article,we show the existence,uniqueness and stability of bounded solutions to the following quasilinear problems with mean curvature operator(φ'(x′(t)))′=f(t,x),t≥t_(0),lim_(t→∞)x(t)=ψ_(0),lim_(t→...In this article,we show the existence,uniqueness and stability of bounded solutions to the following quasilinear problems with mean curvature operator(φ'(x′(t)))′=f(t,x),t≥t_(0),lim_(t→∞)x(t)=ψ_(0),lim_(t→∞)x′(t)e^(t)=0,where t_(0) and ψ_(0) are real constants,φ(s)=s/√1−s^(2),s∈R with s∈(−1,1),f:[t_(0),∞)×R→R satisfies the Lipschitz or Osgood-type conditions.展开更多
Circumlunar abort trajectories constitute a vital contingency return strategy during the translunar phase of crewed lunar missions.This paper proposes a methodology for constructing the solution set of the circumlunar...Circumlunar abort trajectories constitute a vital contingency return strategy during the translunar phase of crewed lunar missions.This paper proposes a methodology for constructing the solution set of the circumlunar abort trajectory and leverages its advantageous properties to address the optimization design problem of abort trajectories.Initially,a solution set of all feasible abort trajectories,originating from an abort point on the nominal trajectory and complying with fundamental reentry constraints,is formulated through the introduction of two novel design parameters.Subsequently,the geometric characteristics of the solution set,as well as the distributional properties of key iterative constraint responses,including flight time and velocity increment,are analyzed.Finally,the characteristics exhibited in the solution set are employed to directly identify the design parameters of the abort trajectories with minimum flight time and velocity increment,thereby providing solutions to two distinct types of optimization problems.The simulation results for a variety of nominal trajectories,encompassing the reconstruction and redesign of the Apollo13 abort trajectory,validate the proposed method,demonstrating its ability to directly generate optimal abort trajectories.The method proposed in this paper investigates feasible abort trajectories from a global perspective,providing both a framework and convenience for mission planning and iterative optimization in abort trajectory design.展开更多
Strong seismic excitation and fault dislocation are likely to occur simultaneously in high-intensity seismic zones,causing severe damage to tunnels crossing active fault zones.This paper aims to develop a novel analyt...Strong seismic excitation and fault dislocation are likely to occur simultaneously in high-intensity seismic zones,causing severe damage to tunnels crossing active fault zones.This paper aims to develop a novel analytical solution to determine the longitudinal mechanical responses of tunnels subjected to the combined effects of seismic waves and strike-slip faulting.Adopting the elastic springbeam model,the seismic waves are modelled as shear horizontal(SH)waves and the fault dislocation follows an S-shaped pattern;the superposition principle for free-fielddisplacements caused by both effects is assumed.In addition,the transmission and reflectionof seismic waves at the fault-rock geological interface and the tangential contact conditions at the tunnel-rock interface are considered.The analytical model is validated against numerical simulations,confirmingits accuracy in calculating tunnel responses.Moreover,a parametric study is conducted to evaluate the impact of key factors,including fault displacement,fault zone width,fault dip angle,earthquake frequency,rock conditions,tunnel lining stiffness,and tangential contact conditions,on tunnel responses.Compared with each effect alone,the combined effects of seismic waves and strike-slip faulting significantlychange the tunnel deformation and internal forces,leading to increased tunnel responses,especially within the fault zone and near the fault-rock interfaces.Depending on specificparameters,tunnel responses can be classifiedinto seismic-dominated,faulting-dominated,and seismic-faulting coupled responses on the basis of the relative contributions of each effect.The proposed analytical solution can be applied to quickly predict the longitudinal mechanical behaviour of tunnels under such combined effects in engineering applications.展开更多
Substrate and nutrient supply are essential for vegetable cultivation in greenhouse.The strategies for plant nutrient supply vary depending on the cultivation methods or substrate dosages employed.With the development...Substrate and nutrient supply are essential for vegetable cultivation in greenhouse.The strategies for plant nutrient supply vary depending on the cultivation methods or substrate dosages employed.With the development of mechanization,wide-row spacing substrate cultivation became an optimize mode of the greenhouse cucumber cultivation,aligning with the trend of intelligent agriculture.To determine the optimal nutrient solution supply amount(NS)and supply frequency(SF)for promoting the integrated growth of cucumber under wide-row spacing substrate cultivation,we explored the effects of substrate supply amount(SS),NS,and SF on cucumber yield,quality,and element utilization efficiency.A five-level quadratic orthogonal rotation combination design with three experimental factors(NS,SF,and SS)was implemented for 23 coupling treatments over three growing seasons,including spring(2022S and 2023S)and autumn(2022A).The technique for order preference by similarity to ideal solution(TOPSIS)combining weights based on game theory was applied to construct cucumber comprehensive growth evaluation model.Single and two experimental factors analyses revealed significant effects of single factors and the coupling of NS-SS,NS-SF and SS-SF on the integrated growth of cucumber for all three growing seasons.For the NS-SF-SS combination,the optimal parameters for comprehensive cucumber growth were determined as follows:levels of^(-1).68 for NS,-0.7 for SF,and^(-1).682 for SS in 2022A;-0.43 for NS,-0.06 for SF,and 0.34 for SS in 2022S;0.3 for NS,-0.02 for SF,and 0.04 for SS in 2023S.Furthermore,for SS ranges of 2.00-3.01,3.01-4.50,4.50-5.99,5.99-7.00(L·plant^(-1)),the corresponding NS and SF intervals maximizing cucumber integrated growth in spring were:0.28-0.30(L·plant^(-1))and 6(times·d^(-1)),0.26-0.30(L·plant^(-1))and 6(times·d^(-1)),0.25-0.30(L·plant^(-1))and 6(times·d^(-1)),0.23-0.30(L·plant^(-1))and 6(times·d^(-1)),respectively.With the same SS,the corresponding NS and SF intervals that maximized cucumber integrated growth in autumn were:0.10(L·plant^(-1))and 8(times·d^(-1)),0.18(L·plant^(-1))and 7(times·d^(-1)),0.30(L·plant^(-1))and 6(times·d^(-1)),0.49(L·plant^(-1))and 5(times·d^(-1)),respectively.The results provide a theoretical basis for solution management,and further in-depth research on cucumber cultivation.展开更多
This study reported the synthesis of magnetic solid solutions V2(A_(x)B_(y)Sn_(1-x-y))C(where A and B are Mn,Fe,or Co)MAX phases.These materials were prepared by incorporating magnetic elements into the V_(2)SnC MAX p...This study reported the synthesis of magnetic solid solutions V2(A_(x)B_(y)Sn_(1-x-y))C(where A and B are Mn,Fe,or Co)MAX phases.These materials were prepared by incorporating magnetic elements into the V_(2)SnC MAX phase via pressure-less sintering at 1000℃for 3 hours.XRD analysis reveals that the composition with x=y=0.2 exhibits a shift of diffraction peaks to higher angles,indicating lattice parameter changes,and achieves the highest phase purity with the maximum solid solution limit,further increases in the dopant content led to the formation of impurities.While the solid solution of magnetic elements preserves the characteristic layered structure of the MAX phase,it successfully induces magnetic properties.The magnetic transition temperatures for these solid solutions ranges from 61 to 200 K.Specifically,V_(2)(Mn_(x)Co_(y)Sn_(1-x-y))C demonstrated hard magnetic characteristics,with a high saturation magnetization(6.536 emu/g)and large remanence(4.236 emu/g).In contrast,V_(2)(Mn_(x)Fe_(y)Sn_(1-x-y))C and V2(Fe_(x)Co_(y)Sn_(1-x-y))C exhibits soft magnetic behavior,evidenced by their narrow hysteresis loops and low coercivity.Their saturation magnetization values are 3.80 and 1.784 emu/g,respectively.The distinctly"S"-shaped hysteresis loop of V_(2)(Fe_(x)Co_(y)Sn_(1-x-y))C further confirms its soft magnetic nature.展开更多
Doping in thin-film transistors(TFTs) plays a crucial role in tailoring material properties to enhance device performance, making them essential for advanced electronic applications. This study explores the synthesis ...Doping in thin-film transistors(TFTs) plays a crucial role in tailoring material properties to enhance device performance, making them essential for advanced electronic applications. This study explores the synthesis and characterization of TFTs fabricated using nickel(Ni)-doped indium oxide(In_(2)O_(3)) via a wet-chemical approach. The presented work investigates the effect of "Ni" incorporation in In_(2)O_(3) on the structural and electrical transport properties of In_(2)O_(3), revealing that higher "Ni" content decreases the oxygen vacancies, leading to a reduction in leakage current and a forward shift in threshold potential(V_(th)).Experimental findings reveal that Ni In O-based TFTs(with Ni = 0.5%) showcase enhanced electrical performance, achieving mobility of 7.54 cm^(2)/(V·s), an impressive ON/OFF current ratio of ~10^(7), a V_(th) of 6.26 V, reduced interfacial trap states(D_(it)) of 8.23 ×10^(12) cm^(-2) and enhanced biased stress stability. The efficacy of "Ni" incorporation is attributed to the upgraded Lewis acidity, stable Ni-O bond strength, and small ionic radius of Ni. Negative bias illumination stability(NBIS) measurements further indicate that device stability diminishes with shorter light wavelengths, likely due to the activation of oxygen vacancies. These findings validate the solution-processed techniques' potential for future large-scale, low-cost, energy-efficient, and high-performance electronics.展开更多
The 15th Five-Year Plan will begin in 2026,amid heightened global technological competition and rapid supply chain changes.At this pivotal moment,the low-altitude economy and commercial aerospace,once seen as futurist...The 15th Five-Year Plan will begin in 2026,amid heightened global technological competition and rapid supply chain changes.At this pivotal moment,the low-altitude economy and commercial aerospace,once seen as futuristic,are quickly transitioning from strategic concepts to large-scale manufacturing industries.These sectors now drive China’s high-quality development and support a new framework for international engagement.展开更多
In-situ stress is a key parameter for underground mine design and rock stability analysis.The borehole overcoring technique is widely used for in-situ stress measurement,but the rheological recovery deformation of roc...In-situ stress is a key parameter for underground mine design and rock stability analysis.The borehole overcoring technique is widely used for in-situ stress measurement,but the rheological recovery deformation of rocks after stress relief introduces errors.To improve accuracy,this study proposes an in-situ stress solution theory that incorporates time-dependent stress relief effects.Triaxial stepwise loadingunloading rheological tests on granite and siltstone established quantitative relationships between instantaneous elastic recovery and viscoelastic recovery under different stress levels,confirming their impact on measurement accuracy.By integrating a dual-class elastic deformation recovery model,an improved in-situ stress solution theory was derived.Additionally,accounting for the nonlinear characteristics of rock masses,a determination method for time-dependent nonlinear mechanical parameters was proposed.Based on the CSIRO hollow inclusion strain cell,time-dependent strain correction equations and long-term confining pressure calibration equations were formulated.Finally,the proposed theory was successfully applied at one iron mine(736 m depth)in Xinjiang,China,and one coal mine(510 m depth)in Ningxia,China.Compared to classical theory,the calculated mean stress values showed accuracy improvements of 6.0%and 9.4%,respectively,validating the applicability and reliability of the proposed theory.展开更多
Titanium plates with a Ti−O solid solution surface-hardened layer were cold roll-bonded with 304 stainless steel plates with high work hardening rates.The evolution and mechanisms affecting the interfacial bonding str...Titanium plates with a Ti−O solid solution surface-hardened layer were cold roll-bonded with 304 stainless steel plates with high work hardening rates.The evolution and mechanisms affecting the interfacial bonding strength in titanium/stainless steel laminated composites were investigated.Results indicate that the hardened layer reduces the interfacial bonding strength from over 261 MPa to less than 204 MPa.During the cold roll-bonding process,the hardened layer fractures,leading to the formation of multi-scale cracks that are difficult for the stainless steel to fill.This not only hinders the development of an interlocking interface but also leads to the presence of numerous microcracks and hardened blocks along the nearly straight interface,consequently weakening the interfacial bonding strength.In metals with high work hardening rates,the conventional approach of enhancing interface interlocking and improving interfacial bonding strength by using a surface-hardened layer becomes less effective.展开更多
A new algorithm for the solution of quadratic programming problemsis put forward in terms of the mixed energy theory and is furtherused for the incremental solution of elastic-plastic trussstructures. The method propo...A new algorithm for the solution of quadratic programming problemsis put forward in terms of the mixed energy theory and is furtherused for the incremental solution of elastic-plastic trussstructures. The method proposed is different from the traditionalone, for which the unknown variables are selected just in one classsuch as displacements or stresses. The present method selects thevariables in the mixed form with both displacement and stress. As themethod is established in the hybrid space, the information found inthe previous incremental step can be used for the solution of thepresent step, making the algorithm highly effi- cient in thenumerical solution process of quadratic programming problems. Theresults obtained in the exm- ples of the elastic-plastic solution ofthe truss structures verify what has been predicted in thetheoretical anal- ysis.展开更多
The improved near crack line analysis method was used to investigate an eccentric cracked plate loaded by two pairs of anti_plane point forces at the crack surface in an elastic_perfectly plastic solid. The analytical...The improved near crack line analysis method was used to investigate an eccentric cracked plate loaded by two pairs of anti_plane point forces at the crack surface in an elastic_perfectly plastic solid. The analytical solutions of the elastic_plastic stress fields and displacements near the crack line have been found without the assumptions of the small scale yielding. The law that the length of the plastic zone along the crack line is varied with an external loads and the bearing capacity of an eccentric cracked plate are obtained.展开更多
The near crack line analysis method was used to investigate a centric crack loaded by two pairs of point shear forces in a finite plate, and the analytical solution was obtained. The solution includes the unit normal ...The near crack line analysis method was used to investigate a centric crack loaded by two pairs of point shear forces in a finite plate, and the analytical solution was obtained. The solution includes the unit normal vector of the elastic-plastic boundary near the crack line, the elastic-plastic stress fields near the crack line, the variations of the length of the plastic zone along the crack line with an external load, and the bearing capacity of a finite plate with a centric crack loaded by two pairs of point shear forces. The results are sufficiently precise near the crack line because the assumptions of small scale yielding theory have not been made and no other assumptions are taken.展开更多
BACKGROUND Esophageal stricture ranks among the most significant complications following endoscopic submucosal dissection(ESD).Excessive fibrotic repair is a typical pathological feature leading to stenosis after ESD....BACKGROUND Esophageal stricture ranks among the most significant complications following endoscopic submucosal dissection(ESD).Excessive fibrotic repair is a typical pathological feature leading to stenosis after ESD.AIM To examine the effectiveness and underlying mechanism of Kangfuxin solution(KFX)in mitigating excessive fibrotic repair of the esophagus post-ESD.METHODS Pigs received KFX at 0.74 mL/kg/d for 21 days after esophageal full circumferential ESD.Endoscopic examinations occurred on days 7 and 21 post-ESD.In vitro,recombinant transforming growth factor(TGF)-β1(5 ng/mL)induced a fibrotic microenvironment in primary esophageal fibroblasts(pEsF).After 24 hours of KFX treatment(at 1.5%,1%,and 0.5%),expression ofα-smooth muscle actin-2(ACTA2),fibronectin(FN),and type collagen I was assessed.Profibrotic signaling was analyzed,including TGF-β1,Smad2/3,and phosphor-smad2/3(p-Smad2/3).RESULTS Compared to the Control group,the groups treated with KFX and prednisolone exhibited reduced esophageal stenosis,lower weight loss rates,and improved food tolerance 21 d after ESD.After treatment,Masson staining revealed thinner and less dense collagen fibers in the submucosal layer.Additionally,the expression of fibrotic effector molecules was notably inhibited.Mechanistically,KFX downregulated the transduction levels of fibrotic functional molecules such as TGF-β1,Smad2/3,and p-Smad2/3.In vitro,pEsF exposed to TGF-β1-induced fibrotic microenvironment displayed increased fibrotic activity,which was reversed by KFX treatment,leading to reduced activation of ACTA2,FN,and collagen I.The 1.5%KFX treatment group showed decreased expression of p-Smad 2/3 in TGF-β1-activated pEsF.CONCLUSION KFX showed promise as a therapeutic option for post-full circumferential esophageal ESD strictures,potentially by suppressing fibroblast fibrotic activity through modulation of the TGF-β1/Smads signaling pathway.展开更多
To examine the similarities and differences in the evolution of cavity,wetting and dynamics of a highspeed,oblique water-entry projectile with different positive angles of attack,a comparative analysis has been conduc...To examine the similarities and differences in the evolution of cavity,wetting and dynamics of a highspeed,oblique water-entry projectile with different positive angles of attack,a comparative analysis has been conducted based on the numerical results of two mathematical models,the rigid-body model and fluid-structure interaction model.In addition,the applicable scope of the above two methods,and the structural response characteristics of the projectile have also been investigated.Our results demonstrate that:(1) The impact loads and angular motion of the projectile of the rigid-body method are more likely to exhibit periodic variations due to the periodic tail slap,its range of positive angles of attack is about α<2°.(2) When the projectile undergone significant wetting,a strong coupling effect is observed among wetting,structural deformation,and projectile motion.With the applied projectile shape,it is observed that,when the projectile bends,the final wetting position is that of Part B(cylinder of body).With the occu rrence of this phenomenon,the projectile ballistics beco me completely unstable.(3) The force exerted on the lower surface of the projectile induced by wetting is the primary reason of the destabilization of the projectile traj ectory and structu ral deformation failure.Bending deformation is most likely to appear at the junction of Part C(cone of body) and Part D(tail).The safe angles of attack of the projectile stability are found to be about α≤2°.展开更多
Tin(Sn)-lead(Pb)mixed halide perovskites have attracted widespread interest due to their wider re-sponse wavelength and lower toxicity than lead halide perovskites,Among the preparation methods,the two-step method mor...Tin(Sn)-lead(Pb)mixed halide perovskites have attracted widespread interest due to their wider re-sponse wavelength and lower toxicity than lead halide perovskites,Among the preparation methods,the two-step method more easily controls the crystallization rate and is suitable for preparing large-area per-ovskite devices.However,the residual low-conductivity iodide layer in the two-step method can affect carrier transport and device stability,and the different crystallization rates of Sn-and Pb-based per-ovskites may result in poor film quality.Therefore,Sn-Pb mixed perovskites are mainly prepared by a one-step method.Herein,a MAPb_(0.5)Sn_(0.5)I_(3)-based self-powered photodetector without a hole transport layer is fabricated by a two-step method.By adjusting the concentration of the ascorbic acid(AA)addi-tive,the final perovskite film exhibited a pure phase without residues,and the optimal device exhibited a high responsivity(0.276 A W^(-1)),large specific detectivity(2.38×10^(12) Jones),and enhanced stability.This enhancement is mainly attributed to the inhibition of Sn2+oxidation,the control of crystal growth,and the sufficient reaction between organic ammonium salts and bottom halides due to the AA-induced pore structure.展开更多
Ultrathin Li-rich Li-Cu binary alloy has become a competitive anode material for Li metal batteries of high energy density.However,due to the poor-lithiophilicity of the single skeleton structure of Li-Cu alloy,it has...Ultrathin Li-rich Li-Cu binary alloy has become a competitive anode material for Li metal batteries of high energy density.However,due to the poor-lithiophilicity of the single skeleton structure of Li-Cu alloy,it has limitations in inducing Li nucleation and improving electrochemical performance.Hence,we introduced Ag species to Li-Cu alloy to form a 30μm thick Li-rich Li-Cu-Ag ternary alloy(LCA)anode,with Li-Ag infinite solid solution as the active phase,and Cu-based finite solid solutions as three-dimensional(3D)skeleton.Such nano-wire networks with LiCu4 and CuxAgy finite solid solution phases were prepared through a facile melt coating technique,where Ag element can act as lithiophilic specie to enhance the lithiophilicity of built-in skeleton,and regulate the deposition behavior of Li effectively.Notably,the formation of CuxAgy solid solution can strengthen the structural stability of the skeleton,ensuring the geometrical integrity of Li anode,even at the fully delithiated state.Meanwhile,the Li-Ag infinite solid solution phase can promote the Li plating/stripping reversibility of the LCA anode with an improved coulombic efficiency(CE).The synergistic effect between infinite and finite solid solutions could render an enhanced electrochemical performance of Li metal batteries.The LCA|LCA symmetric cells showed a long lifespan of over 600 h with stable polarization voltage of 40 mV,in 1 mA·cm^(-2)/1 mAh·cm^(-2).In addition,the full cells matching our ultrathin LCA anode with 17.2 mg·cm^(-2)mass loading of LiFePO_(4) cathode,can continuously operate beyond 110 cycles at 0.5C,with a high capacity retention of 91.5%.Kindly check and confirm the edit made in the article title.展开更多
基金Project(04JJ40035) supported by the Natural Science Foundation of Hunan Province, China Project(2003AA331090) supported by the High-tech Research and Development Program of China
文摘An analytical method was proposed to solve the mechanical problems of stamping a thin strip on an elastic foundation. The thin strip was divided into four parts according to its deformation and contact with the punch and the elastic foundation, especially an elastic-plastic part was considered in the deflection of the thin strip. Analytical solutions were derived individually for each part and two models were established with the help of elastic and plastic large deflection theories. Compatibility conditions between the neighboring parts of the thin strip constructed the non-linear equation group. Solutions were carried out by programming with a software. The deformation shape, the membrane force, and the moment and shear force of the deformed thin strip were obtained. The results of the two models were compared. The study shows that the method is effective.
基金Supported by the Doctoral Research Start-up Project of Yuncheng University(YQ-2023067)Project of Shanxi Natural Science Foundation(202303021211189)+1 种基金Fund Program for the Scientific Activities of Selected Returned Overseas Professionals in Shanxi Provinces(20220036)Shanxi ProvinceIntelligent Optoelectronic Sensing Application Technology Innovation Center and Shanxi Province Optoelectronic Information Science and TechnologyLaboratory,Yuncheng University.
文摘In this study,a straightforward one-step hydrothermal method was successfully utilized to synthesize the solid solution Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)-Na_(2)Ni_(2)Ti_(6)O_(16)(NNMTO-x),where x denotes the molar percentage of Na_(2)Ni_(2)Ti_(6)O_(16)(NNTO)within Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)(NMTO),with x values of 10,20,30,40,and 50.Both XPS(X-ray Photoelectron Spectroscopy)and EDX(Energy Dispersive X-ray Spectroscopy)analyses unequivocally validated the formation of the NNMTO-x solid solutions.It was observed that when x is below 40,the NNMTO-x solid solution retains the structural characteristics of the original NMTO.However,beyond this threshold,significant alterations in crystal morphology were noted,accompanied by a noticeable decline in photocatalytic activity.Notably,the absorption edge of NNMTO-x(x<40)exhibited a shift towards the visible-light spectrum,thereby substantially broadening the absorption range.The findings highlight that NNMTO-30 possesses the most pronounced photocatalytic activity for the reduction of CO_(2).Specifically,after a 6 h irradiation period,the production rates of CO and CH_(4)were recorded at 42.38 and 1.47μmol/g,respectively.This investigation provides pivotal insights that are instrumental in the advancement of highly efficient and stable photocatalysts tailored for CO_(2)reduction processes.
基金Supported by National Natural Science Foundation of China(Grant No.62173161).
文摘Let A be a 3×3 singular or diagonalizable matrix,all solutions to the Yang-Baxter-like matrix equation have been determined.However,finding all solutions for full rank,non-diagonalizable matrices remains challenging.By utilizing classification techniques,we establish all solutions of the Yang-Baxter-like matrix equation in this paper when the coefficient matrix A is similar to non-diagonalizable matrix diag(λ,J_(2)(λ))withλ̸=0.More specifically,we divide the non-diagonal elements of the solution into 10 different cases.By discussing each situation,we establish all solutions of the Yang-Baxter-like matrix equation.The results of this work enrich the existing ones.
基金supported by the National Natural Science Foundation of China(12401279,12371219)the Academic and Technical Leaders Training Plan of Jiangxi Province(20212BCJ23027).
文摘This paper is concerned with an initial boundary value problem for the planar magnetohydrodynamic compressible flow with temperature dependent heat conductivity in a half-line.In particular,the transverse magnetic field is assumed to satisfy the Neumann boundary condition,which was first investigated by Kazhikhov in 1987.We establish the global existence of the unique strong solutions to the MHD equations without any smallness conditions on the initial data.More precisely,our result can be regarded as a natural generalization of Kazhikov’s result for applying the constant heat-conductivity in bounded domains to the degenerate case in unbounded domains.
基金Supported by the National Natural Science Foundation of China(Grant Nos.12361040,12061064)the National Science Foundation of Gansu Province(Grant No.22JR5RA264)State Scholarship Fund(Grant No.20230862021).
文摘In this article,we show the existence,uniqueness and stability of bounded solutions to the following quasilinear problems with mean curvature operator(φ'(x′(t)))′=f(t,x),t≥t_(0),lim_(t→∞)x(t)=ψ_(0),lim_(t→∞)x′(t)e^(t)=0,where t_(0) and ψ_(0) are real constants,φ(s)=s/√1−s^(2),s∈R with s∈(−1,1),f:[t_(0),∞)×R→R satisfies the Lipschitz or Osgood-type conditions.
文摘Circumlunar abort trajectories constitute a vital contingency return strategy during the translunar phase of crewed lunar missions.This paper proposes a methodology for constructing the solution set of the circumlunar abort trajectory and leverages its advantageous properties to address the optimization design problem of abort trajectories.Initially,a solution set of all feasible abort trajectories,originating from an abort point on the nominal trajectory and complying with fundamental reentry constraints,is formulated through the introduction of two novel design parameters.Subsequently,the geometric characteristics of the solution set,as well as the distributional properties of key iterative constraint responses,including flight time and velocity increment,are analyzed.Finally,the characteristics exhibited in the solution set are employed to directly identify the design parameters of the abort trajectories with minimum flight time and velocity increment,thereby providing solutions to two distinct types of optimization problems.The simulation results for a variety of nominal trajectories,encompassing the reconstruction and redesign of the Apollo13 abort trajectory,validate the proposed method,demonstrating its ability to directly generate optimal abort trajectories.The method proposed in this paper investigates feasible abort trajectories from a global perspective,providing both a framework and convenience for mission planning and iterative optimization in abort trajectory design.
基金supported by the National Natural Science Foundation of China(No.41941018)Shanghai Gaofeng Discipline Construction Funding.
文摘Strong seismic excitation and fault dislocation are likely to occur simultaneously in high-intensity seismic zones,causing severe damage to tunnels crossing active fault zones.This paper aims to develop a novel analytical solution to determine the longitudinal mechanical responses of tunnels subjected to the combined effects of seismic waves and strike-slip faulting.Adopting the elastic springbeam model,the seismic waves are modelled as shear horizontal(SH)waves and the fault dislocation follows an S-shaped pattern;the superposition principle for free-fielddisplacements caused by both effects is assumed.In addition,the transmission and reflectionof seismic waves at the fault-rock geological interface and the tangential contact conditions at the tunnel-rock interface are considered.The analytical model is validated against numerical simulations,confirmingits accuracy in calculating tunnel responses.Moreover,a parametric study is conducted to evaluate the impact of key factors,including fault displacement,fault zone width,fault dip angle,earthquake frequency,rock conditions,tunnel lining stiffness,and tangential contact conditions,on tunnel responses.Compared with each effect alone,the combined effects of seismic waves and strike-slip faulting significantlychange the tunnel deformation and internal forces,leading to increased tunnel responses,especially within the fault zone and near the fault-rock interfaces.Depending on specificparameters,tunnel responses can be classifiedinto seismic-dominated,faulting-dominated,and seismic-faulting coupled responses on the basis of the relative contributions of each effect.The proposed analytical solution can be applied to quickly predict the longitudinal mechanical behaviour of tunnels under such combined effects in engineering applications.
基金supported by the China Agriculture Research System(Grant No.CARS-23-D06)the Key Research and Development Program of Shaanxi Province(Grant Nos.2024NC2-GJHX-29 and 2024NC-ZDCYL-05-08)Shaanxi Agricultural Collaborative Innovation and Extension Alliance Project(Grant No.LMZD202202).
文摘Substrate and nutrient supply are essential for vegetable cultivation in greenhouse.The strategies for plant nutrient supply vary depending on the cultivation methods or substrate dosages employed.With the development of mechanization,wide-row spacing substrate cultivation became an optimize mode of the greenhouse cucumber cultivation,aligning with the trend of intelligent agriculture.To determine the optimal nutrient solution supply amount(NS)and supply frequency(SF)for promoting the integrated growth of cucumber under wide-row spacing substrate cultivation,we explored the effects of substrate supply amount(SS),NS,and SF on cucumber yield,quality,and element utilization efficiency.A five-level quadratic orthogonal rotation combination design with three experimental factors(NS,SF,and SS)was implemented for 23 coupling treatments over three growing seasons,including spring(2022S and 2023S)and autumn(2022A).The technique for order preference by similarity to ideal solution(TOPSIS)combining weights based on game theory was applied to construct cucumber comprehensive growth evaluation model.Single and two experimental factors analyses revealed significant effects of single factors and the coupling of NS-SS,NS-SF and SS-SF on the integrated growth of cucumber for all three growing seasons.For the NS-SF-SS combination,the optimal parameters for comprehensive cucumber growth were determined as follows:levels of^(-1).68 for NS,-0.7 for SF,and^(-1).682 for SS in 2022A;-0.43 for NS,-0.06 for SF,and 0.34 for SS in 2022S;0.3 for NS,-0.02 for SF,and 0.04 for SS in 2023S.Furthermore,for SS ranges of 2.00-3.01,3.01-4.50,4.50-5.99,5.99-7.00(L·plant^(-1)),the corresponding NS and SF intervals maximizing cucumber integrated growth in spring were:0.28-0.30(L·plant^(-1))and 6(times·d^(-1)),0.26-0.30(L·plant^(-1))and 6(times·d^(-1)),0.25-0.30(L·plant^(-1))and 6(times·d^(-1)),0.23-0.30(L·plant^(-1))and 6(times·d^(-1)),respectively.With the same SS,the corresponding NS and SF intervals that maximized cucumber integrated growth in autumn were:0.10(L·plant^(-1))and 8(times·d^(-1)),0.18(L·plant^(-1))and 7(times·d^(-1)),0.30(L·plant^(-1))and 6(times·d^(-1)),0.49(L·plant^(-1))and 5(times·d^(-1)),respectively.The results provide a theoretical basis for solution management,and further in-depth research on cucumber cultivation.
基金Funded by the National Natural Science Foundation for Young Scholars of China(No.51302073)the Hubei Provincial Key Laboratory of Green Materials for Light Industry,Hubei University of Technology(No.202509B13)。
文摘This study reported the synthesis of magnetic solid solutions V2(A_(x)B_(y)Sn_(1-x-y))C(where A and B are Mn,Fe,or Co)MAX phases.These materials were prepared by incorporating magnetic elements into the V_(2)SnC MAX phase via pressure-less sintering at 1000℃for 3 hours.XRD analysis reveals that the composition with x=y=0.2 exhibits a shift of diffraction peaks to higher angles,indicating lattice parameter changes,and achieves the highest phase purity with the maximum solid solution limit,further increases in the dopant content led to the formation of impurities.While the solid solution of magnetic elements preserves the characteristic layered structure of the MAX phase,it successfully induces magnetic properties.The magnetic transition temperatures for these solid solutions ranges from 61 to 200 K.Specifically,V_(2)(Mn_(x)Co_(y)Sn_(1-x-y))C demonstrated hard magnetic characteristics,with a high saturation magnetization(6.536 emu/g)and large remanence(4.236 emu/g).In contrast,V_(2)(Mn_(x)Fe_(y)Sn_(1-x-y))C and V2(Fe_(x)Co_(y)Sn_(1-x-y))C exhibits soft magnetic behavior,evidenced by their narrow hysteresis loops and low coercivity.Their saturation magnetization values are 3.80 and 1.784 emu/g,respectively.The distinctly"S"-shaped hysteresis loop of V_(2)(Fe_(x)Co_(y)Sn_(1-x-y))C further confirms its soft magnetic nature.
基金funded by the research startup funding of National Research Foundation (NRF) of Korea through the Ministry of Science and ICT 2022R1G1A1009887Part of this study was supported by research start-up funding of Anhui University (S202418001/078)。
文摘Doping in thin-film transistors(TFTs) plays a crucial role in tailoring material properties to enhance device performance, making them essential for advanced electronic applications. This study explores the synthesis and characterization of TFTs fabricated using nickel(Ni)-doped indium oxide(In_(2)O_(3)) via a wet-chemical approach. The presented work investigates the effect of "Ni" incorporation in In_(2)O_(3) on the structural and electrical transport properties of In_(2)O_(3), revealing that higher "Ni" content decreases the oxygen vacancies, leading to a reduction in leakage current and a forward shift in threshold potential(V_(th)).Experimental findings reveal that Ni In O-based TFTs(with Ni = 0.5%) showcase enhanced electrical performance, achieving mobility of 7.54 cm^(2)/(V·s), an impressive ON/OFF current ratio of ~10^(7), a V_(th) of 6.26 V, reduced interfacial trap states(D_(it)) of 8.23 ×10^(12) cm^(-2) and enhanced biased stress stability. The efficacy of "Ni" incorporation is attributed to the upgraded Lewis acidity, stable Ni-O bond strength, and small ionic radius of Ni. Negative bias illumination stability(NBIS) measurements further indicate that device stability diminishes with shorter light wavelengths, likely due to the activation of oxygen vacancies. These findings validate the solution-processed techniques' potential for future large-scale, low-cost, energy-efficient, and high-performance electronics.
文摘The 15th Five-Year Plan will begin in 2026,amid heightened global technological competition and rapid supply chain changes.At this pivotal moment,the low-altitude economy and commercial aerospace,once seen as futuristic,are quickly transitioning from strategic concepts to large-scale manufacturing industries.These sectors now drive China’s high-quality development and support a new framework for international engagement.
基金supported by the National Science and Technology Major Project of the Ministry of Science and Technology of China(No.2024ZD1700201)the National Natural Science Foundation of China(Nos.U2034206,51974014 and 51574014)+1 种基金the Guangdong Basic and Applied Basic Research Foundation(No.2024A1515011631)the National Key Research and Development Project of China(No.2022YFC3004601)。
文摘In-situ stress is a key parameter for underground mine design and rock stability analysis.The borehole overcoring technique is widely used for in-situ stress measurement,but the rheological recovery deformation of rocks after stress relief introduces errors.To improve accuracy,this study proposes an in-situ stress solution theory that incorporates time-dependent stress relief effects.Triaxial stepwise loadingunloading rheological tests on granite and siltstone established quantitative relationships between instantaneous elastic recovery and viscoelastic recovery under different stress levels,confirming their impact on measurement accuracy.By integrating a dual-class elastic deformation recovery model,an improved in-situ stress solution theory was derived.Additionally,accounting for the nonlinear characteristics of rock masses,a determination method for time-dependent nonlinear mechanical parameters was proposed.Based on the CSIRO hollow inclusion strain cell,time-dependent strain correction equations and long-term confining pressure calibration equations were formulated.Finally,the proposed theory was successfully applied at one iron mine(736 m depth)in Xinjiang,China,and one coal mine(510 m depth)in Ningxia,China.Compared to classical theory,the calculated mean stress values showed accuracy improvements of 6.0%and 9.4%,respectively,validating the applicability and reliability of the proposed theory.
基金supported by the National Key R&D Program of China (No. 2018YFA0707300)the National Natural Science Foundation of China (No. 52374376)the Introduction Plan for High end Foreign Experts, China (No. G2023105001L)。
文摘Titanium plates with a Ti−O solid solution surface-hardened layer were cold roll-bonded with 304 stainless steel plates with high work hardening rates.The evolution and mechanisms affecting the interfacial bonding strength in titanium/stainless steel laminated composites were investigated.Results indicate that the hardened layer reduces the interfacial bonding strength from over 261 MPa to less than 204 MPa.During the cold roll-bonding process,the hardened layer fractures,leading to the formation of multi-scale cracks that are difficult for the stainless steel to fill.This not only hinders the development of an interlocking interface but also leads to the presence of numerous microcracks and hardened blocks along the nearly straight interface,consequently weakening the interfacial bonding strength.In metals with high work hardening rates,the conventional approach of enhancing interface interlocking and improving interfacial bonding strength by using a surface-hardened layer becomes less effective.
基金the National Natural Science Foundation of China(No.50178916,No.19732020 and No.19872016)the National Key Basic lteseareh Special Foundation(No.G1999032805)+1 种基金the Special Funds for Major State Basic Researeh Projectsthe Foundation for University Key Teachers by the Ministry of Education of China
文摘A new algorithm for the solution of quadratic programming problemsis put forward in terms of the mixed energy theory and is furtherused for the incremental solution of elastic-plastic trussstructures. The method proposed is different from the traditionalone, for which the unknown variables are selected just in one classsuch as displacements or stresses. The present method selects thevariables in the mixed form with both displacement and stress. As themethod is established in the hybrid space, the information found inthe previous incremental step can be used for the solution of thepresent step, making the algorithm highly effi- cient in thenumerical solution process of quadratic programming problems. Theresults obtained in the exm- ples of the elastic-plastic solution ofthe truss structures verify what has been predicted in thetheoretical anal- ysis.
文摘The improved near crack line analysis method was used to investigate an eccentric cracked plate loaded by two pairs of anti_plane point forces at the crack surface in an elastic_perfectly plastic solid. The analytical solutions of the elastic_plastic stress fields and displacements near the crack line have been found without the assumptions of the small scale yielding. The law that the length of the plastic zone along the crack line is varied with an external loads and the bearing capacity of an eccentric cracked plate are obtained.
基金Key Project(2004BA901A02) supported by the Ministry of Science and Technology of China
文摘The near crack line analysis method was used to investigate a centric crack loaded by two pairs of point shear forces in a finite plate, and the analytical solution was obtained. The solution includes the unit normal vector of the elastic-plastic boundary near the crack line, the elastic-plastic stress fields near the crack line, the variations of the length of the plastic zone along the crack line with an external load, and the bearing capacity of a finite plate with a centric crack loaded by two pairs of point shear forces. The results are sufficiently precise near the crack line because the assumptions of small scale yielding theory have not been made and no other assumptions are taken.
基金Supported by Science and Technology Department of Sichuan Province,No.2020YFS0376National Natural Science Foundation of China,No.81900599Science and Technology Program of Hospital of TCM,Southwest Medical University,No.2022-CXTD-01.
文摘BACKGROUND Esophageal stricture ranks among the most significant complications following endoscopic submucosal dissection(ESD).Excessive fibrotic repair is a typical pathological feature leading to stenosis after ESD.AIM To examine the effectiveness and underlying mechanism of Kangfuxin solution(KFX)in mitigating excessive fibrotic repair of the esophagus post-ESD.METHODS Pigs received KFX at 0.74 mL/kg/d for 21 days after esophageal full circumferential ESD.Endoscopic examinations occurred on days 7 and 21 post-ESD.In vitro,recombinant transforming growth factor(TGF)-β1(5 ng/mL)induced a fibrotic microenvironment in primary esophageal fibroblasts(pEsF).After 24 hours of KFX treatment(at 1.5%,1%,and 0.5%),expression ofα-smooth muscle actin-2(ACTA2),fibronectin(FN),and type collagen I was assessed.Profibrotic signaling was analyzed,including TGF-β1,Smad2/3,and phosphor-smad2/3(p-Smad2/3).RESULTS Compared to the Control group,the groups treated with KFX and prednisolone exhibited reduced esophageal stenosis,lower weight loss rates,and improved food tolerance 21 d after ESD.After treatment,Masson staining revealed thinner and less dense collagen fibers in the submucosal layer.Additionally,the expression of fibrotic effector molecules was notably inhibited.Mechanistically,KFX downregulated the transduction levels of fibrotic functional molecules such as TGF-β1,Smad2/3,and p-Smad2/3.In vitro,pEsF exposed to TGF-β1-induced fibrotic microenvironment displayed increased fibrotic activity,which was reversed by KFX treatment,leading to reduced activation of ACTA2,FN,and collagen I.The 1.5%KFX treatment group showed decreased expression of p-Smad 2/3 in TGF-β1-activated pEsF.CONCLUSION KFX showed promise as a therapeutic option for post-full circumferential esophageal ESD strictures,potentially by suppressing fibroblast fibrotic activity through modulation of the TGF-β1/Smads signaling pathway.
基金supported by the Postgraduate Research&Practice Innovation Program of Jiangsu Province(Grant No.KYCX24_0714).
文摘To examine the similarities and differences in the evolution of cavity,wetting and dynamics of a highspeed,oblique water-entry projectile with different positive angles of attack,a comparative analysis has been conducted based on the numerical results of two mathematical models,the rigid-body model and fluid-structure interaction model.In addition,the applicable scope of the above two methods,and the structural response characteristics of the projectile have also been investigated.Our results demonstrate that:(1) The impact loads and angular motion of the projectile of the rigid-body method are more likely to exhibit periodic variations due to the periodic tail slap,its range of positive angles of attack is about α<2°.(2) When the projectile undergone significant wetting,a strong coupling effect is observed among wetting,structural deformation,and projectile motion.With the applied projectile shape,it is observed that,when the projectile bends,the final wetting position is that of Part B(cylinder of body).With the occu rrence of this phenomenon,the projectile ballistics beco me completely unstable.(3) The force exerted on the lower surface of the projectile induced by wetting is the primary reason of the destabilization of the projectile traj ectory and structu ral deformation failure.Bending deformation is most likely to appear at the junction of Part C(cone of body) and Part D(tail).The safe angles of attack of the projectile stability are found to be about α≤2°.
基金supported by the National Natural Science Foun-dation of China(Nos.52025028,52332008,52372214,52202273,and U22A20137)the Priority Academic Program Development(PAPD)of Jiangsu Higher Education Institutions.
文摘Tin(Sn)-lead(Pb)mixed halide perovskites have attracted widespread interest due to their wider re-sponse wavelength and lower toxicity than lead halide perovskites,Among the preparation methods,the two-step method more easily controls the crystallization rate and is suitable for preparing large-area per-ovskite devices.However,the residual low-conductivity iodide layer in the two-step method can affect carrier transport and device stability,and the different crystallization rates of Sn-and Pb-based per-ovskites may result in poor film quality.Therefore,Sn-Pb mixed perovskites are mainly prepared by a one-step method.Herein,a MAPb_(0.5)Sn_(0.5)I_(3)-based self-powered photodetector without a hole transport layer is fabricated by a two-step method.By adjusting the concentration of the ascorbic acid(AA)addi-tive,the final perovskite film exhibited a pure phase without residues,and the optimal device exhibited a high responsivity(0.276 A W^(-1)),large specific detectivity(2.38×10^(12) Jones),and enhanced stability.This enhancement is mainly attributed to the inhibition of Sn2+oxidation,the control of crystal growth,and the sufficient reaction between organic ammonium salts and bottom halides due to the AA-induced pore structure.
基金supported by the National Natural Science Foundation of China(Nos.22379019,52172184)Sichuan Science and Technology Program(No.2024YFHZ0313)S&T Special Program of Huzhou(No.2023GZ03)。
文摘Ultrathin Li-rich Li-Cu binary alloy has become a competitive anode material for Li metal batteries of high energy density.However,due to the poor-lithiophilicity of the single skeleton structure of Li-Cu alloy,it has limitations in inducing Li nucleation and improving electrochemical performance.Hence,we introduced Ag species to Li-Cu alloy to form a 30μm thick Li-rich Li-Cu-Ag ternary alloy(LCA)anode,with Li-Ag infinite solid solution as the active phase,and Cu-based finite solid solutions as three-dimensional(3D)skeleton.Such nano-wire networks with LiCu4 and CuxAgy finite solid solution phases were prepared through a facile melt coating technique,where Ag element can act as lithiophilic specie to enhance the lithiophilicity of built-in skeleton,and regulate the deposition behavior of Li effectively.Notably,the formation of CuxAgy solid solution can strengthen the structural stability of the skeleton,ensuring the geometrical integrity of Li anode,even at the fully delithiated state.Meanwhile,the Li-Ag infinite solid solution phase can promote the Li plating/stripping reversibility of the LCA anode with an improved coulombic efficiency(CE).The synergistic effect between infinite and finite solid solutions could render an enhanced electrochemical performance of Li metal batteries.The LCA|LCA symmetric cells showed a long lifespan of over 600 h with stable polarization voltage of 40 mV,in 1 mA·cm^(-2)/1 mAh·cm^(-2).In addition,the full cells matching our ultrathin LCA anode with 17.2 mg·cm^(-2)mass loading of LiFePO_(4) cathode,can continuously operate beyond 110 cycles at 0.5C,with a high capacity retention of 91.5%.Kindly check and confirm the edit made in the article title.
