Predictions of fluid distribution,stress field,and natural fracture are essential for exploiting unconventional shale gas reservoirs.Given the high likelihood of tilted fractures in subsurface formations,this study fo...Predictions of fluid distribution,stress field,and natural fracture are essential for exploiting unconventional shale gas reservoirs.Given the high likelihood of tilted fractures in subsurface formations,this study focuses on simultaneous seismic inversion to estimate fluid bulk modulus,effective stress parameter,and fracture density in the tilted transversely isotropic(TTI)medium.In this article,a novel PP-wave reflection coefficient approximation equation is first derived based on the constructed TTI stiffness matrix incorporating fracture density,effective stress parameter,and fluid bulk modulus.The high accuracy of the proposed equation has been demonstrated using an anisotropic two-layer model.Furthermore,a stepwise seismic inversion strategy with the L_(P) quasi-norm sparsity constraint is implemented to obtain the anisotropic and isotropic parameters.Three synthetic model tests with varying signal-to-noise ratios(SNRs)confirm the method's feasibility and noise robustness.Ultimately,the proposed method is applied to a 3D fractured shale gas reservoir in the Sichuan Basin,China.The results have effectively characterized shale gas distribution,stress fields,and tilted natural fractures,with validation from geological structures,well logs,and microseismic events.These findings can provide valuable guidance for hydraulic fracturing development,enabling more reliable predictions of reservoir heterogeneity and completion quality.展开更多
Effectiveness evaluation of the joint operation system is an important basis for the demonstration and development of weapon equipment.With the consideration that existing models of system effectiveness evaluation sel...Effectiveness evaluation of the joint operation system is an important basis for the demonstration and development of weapon equipment.With the consideration that existing models of system effectiveness evaluation seldom describe the structural relationship among equipment clearly as well as reflect the dynamic,the analog-to-digital converter-graphical evaluation and review technique(ADC-GERT)network parameter estimation model is proposed based on the ADC model and the joint operation system structure.Firstly,analysis of the joint operation system structure and operation process is conducted to build the GERT network,where equipment subsystems are nodes and activities are directed arches.Then the mission effectiveness of equipment subsystems is calculated by the ADC model.The probability transfer parameters are modified by the mission effectiveness of equipment subsystems based on the Bayesian theorem,with the ADC-GERT network parameter estimation model constructed.Finally,a case study is used to validate the efficiency and dynamic of the ADC-GERT network parameter estimation model.展开更多
The values of effective breeding coefficient Keff in a reactor core of nuclear power plant are calculated for different values of parameters （core structure, fuel assembly component） by using the Monte Carlo method....The values of effective breeding coefficient Keff in a reactor core of nuclear power plant are calculated for different values of parameters （core structure, fuel assembly component） by using the Monte Carlo method. The obtained values of Keff are compared and analysed, which can provide theoretical basis for reactor design.展开更多
As the platform for surface-source infrared decoys,the target aircraft is the aim of attacks in air-to-air combat.It can quickly and accurately evaluate the jamming effectiveness of the surface-source IR decoy in vari...As the platform for surface-source infrared decoys,the target aircraft is the aim of attacks in air-to-air combat.It can quickly and accurately evaluate the jamming effectiveness of the surface-source IR decoy in various states of motion is important for enhancing the security of the aircraft.This paper proposes a model of surface-source IR decoy,and compares and analyzes simulated and measured infrared images of diffusion.A system to assess the effectiveness of the jamming of the surface-source IR decoy,target aircraft,and infrared guided missile called“Trinity”is established.Simulations were conducted to assess the impact of flight height,flight speed,and the maneuvering of the target aircraft on the jamming effectiveness of the surface-source IR decoy.The results show that with an increase in flight height and speed,the jamming probability of a surface-source IR decoy first increases and then decreases,where evasive maneuvering by the target aircraft can effectively improve this probability.When the radius of the vertical snake maneuver was 125 m,that of the horizontal snake maneuver was 200 m,and the radius of the barrel roll maneuver was 250 m,the jamming probability of the surface-source IR decoy was relatively high.By comparing the simulation results with measured data,the study verified the accuracy of the proposed method.展开更多
The equivalent medium theory of metamaterials provides a way to obtain their effective constitutive parameters.However,because of its non-reciprocity,the complexity of the electromagnetic coupling,and a metallic botto...The equivalent medium theory of metamaterials provides a way to obtain their effective constitutive parameters.However,because of its non-reciprocity,the complexity of the electromagnetic coupling,and a metallic bottom layer,it has been challenging to retrieve them from a metamaterial absorber.In this paper,we propose a method without any approximation to obtain them,in which the non-reciprocity and the strong electromagnetic coupling are included.Compared with the three methods such as symmetric metamaterial method,asymmetric metamaterial method and metasurface method,our method can reveal the metamaterial absorber’s electrical and magnetic resonance and show its electromagnetic coupling coefficients.To deal with a metamaterial absorber with a metallic bottom layer,four corners of the metallic bottom layer in the unit cell are removed,making it possible to retrieve the electromagnetic parameters.Surprisingly,these results show that the metamaterial absorber with a metallic bottom layer in our example operates in a negative refraction state at the half absorption frequencies,which helps further understand the absorbing mechanism of these metamaterial absorbers.展开更多
Quality factors for protons and helium particles has determined for cell inactivation using linear energy transfer. The quality has also been investigated as a function for other physical parameters, such as mean free...Quality factors for protons and helium particles has determined for cell inactivation using linear energy transfer. The quality has also been investigated as a function for other physical parameters, such as mean free path and effective charge for protons and helium particles, for a better interpretation to the effectiveness of these charged particles in V79 cells. Explanation of quality is clearly illustrated in terms of the average dis-tance of energy deposition events in biological systems.展开更多
Objective The purpose of the study was to investigate the effective parameters of electric cortex stimulation (ECS) for functional brain mapping. Methods We collected 21 subjects who underwent epilepsy surgeries conse...Objective The purpose of the study was to investigate the effective parameters of electric cortex stimulation (ECS) for functional brain mapping. Methods We collected 21 subjects who underwent epilepsy surgeries consecutively in Beijing Institute of Functional Neurosurgery with the epileptogenic zone located in perirolandic areas from展开更多
[Objective] This study aimed to investigate the combined effects of sowing date, plant density, nitrogenous fertilizer, phosphorus fertilizer and potassium fertilizer on quality parameters of high grade hybrid rapesee...[Objective] This study aimed to investigate the combined effects of sowing date, plant density, nitrogenous fertilizer, phosphorus fertilizer and potassium fertilizer on quality parameters of high grade hybrid rapeseed. [Method] By using Youyan 599 and Sanbei 98 as experimental materials, quadratic orthogonal rotation combination with five factors was designed for this study. [Result] Erucic acid content was nega- tively correlated with sowing date and nitrogen fertilizer, positively correlated with plant density. Glucosinolate content was negatively correlated with sowing date, positively correlated with potash fertilizer amount. Oil content was negatively correlated with sowing date and nitrogen fertilizer amount, positively correlated with plant density and potash fertilizer amount. Protein content was positively correlated with sowing date and nitrogen fertilizer amount, negatively correlated with plant density and potash fer- tilizer amount. Oleic acid content was negatively correlated with phosphate fertilizer amount, positively correlated with nitrogen fertilizer amount. Palmitic acid was nega- tively correlated with potash fertilizer amount, positively correlated with sowing date, plant density, nitrogen fertilizer amount and phosphate fertilizer amount in Youyan 599, but negatively correlated with sowing date, plant density, nitrogen fertilizer amount and phosphate fertilizer amount in Sanbei 98. Stearic acid content was posi- tively correlated with sowing date, plant density, nitrogen fertilizer amount and phos- phate fertilizer amount. Linoleic acid was positively correlated with density and nitroge- nous fertilizer, but negatively correlated with potash fertilizer amount. Linolenic acid was positively correlated with nitrogen fertilizer amount and potash fertilizer amount. Eicosenoic acid was negatively correlated with sowing date. There were positive cor- relations and negative correlations among cultivation conditions and quality parame- ters, and the positive correlations and negative correlations could counteract each other. Expression of quality parameters for each treatment was the combined effect. Among the 50 pairs of simple correlations of five cultivation factors and ten quality parameters, 26 pairs were consistent between two varieties, 24 pairs of simple corre- lation were not. Sowing date, plant density, nitrogen fertilizer amount and phosphate fertilizer amount showed significant influence on erucic acid of two varieties, but small effect on palmitic acid. [Conclusion] The combined effect of the five cultivation factors could not fundamentally improve the quality traits of high grade hybrid rapeseed.展开更多
Backgroud： This study aimed to determine the effects of early antibiotic intervention（EAI） on subsequent blood parameters, apparent nutrient digestibility, and fecal fermentation profile in pigs with different diet...Backgroud： This study aimed to determine the effects of early antibiotic intervention（EAI） on subsequent blood parameters, apparent nutrient digestibility, and fecal fermentation profile in pigs with different dietary crude protein（CP） levels. Eighteen litters of piglets（total 212） were randomly allocated to 2 groups and were fed a creep feed diet with or without in-feed antibiotics（olaquindox, oxytetracycline calcium and kitasamycin） from postnatal d 7 to d 42. On d 42, the piglets within the control or antibiotic group were mixed, respectively, and then further randomly assigned to a normal-（20%, 18%, and 14% CP from d 42 to d 77, d 77 to d 120, and d 120 to d 185,respectively） or a low-CP diet（16%, 14%, and 10% CP from d 42 to d 77, d 77 to d 120, and d 120 to d 185,respectively）, generating 4 groups. On d 77（short-term） and d 185（long-term）, serum and fecal samples were obtained for blood parameters, microbial composition and microbial metabolism analysis.Results： EAI increased（P 〈 0.05） albumin and glucose concentrations in low-CP diet on d 77, and increased（P 〈 0.05） urea concentration in normal-CP diet. On d 185, EAI increased（P 〈 0.05） globulin concentration in normal-CP diets, but decreased glucose concentration. For nutrient digestibility, EAI increased（P 〈 0.05）digestibility of CP on d 77. For fecal microbiota, the EAI as well as low-CP diet decreased（P 〈 0.05） E. coli count on d 77. For fecal metabolites, on d 77, EAI decreased（P 〈 0.05） total amines concentration but increased skatole concentration in low-CP diet. On d 185, the EAI increased（P 〈 0.05） putrescine and total amines concentrations in low-CP diets but reduced（P 〈 0.05） in the normal-CP diets. The low-CP diet decreased the concentrations of these compounds.Conclusions： Collectively, these results indicate that EAI has short-term effects on the blood parameters and fecal microbial fermentation profile. The effects of EAI varied between CP levels, which was characterized by the significant alteration of glucose and putrescine concentration.展开更多
Through the differentiating and integrating process, a mathematical model for tempering time effect on quenched steel was derived based on the attribute of state function and the general equation of Hollomon parameter...Through the differentiating and integrating process, a mathematical model for tempering time effect on quenched steel was derived based on the attribute of state function and the general equation of Hollomon parameter, which correlates the tempering hardness with the tempering time at different tempering temperature. Using the established model, the linear relationship between the tempering hardness and the tempering time in logarithm was proved theoretically, and the tempering hardness for various tempering time was reduced to the measurement and calculation of a hardness experiment tempered for 1 h at different tempering temperatures. Moreover, the hardness of steel 42CrMo and T8Mn tempered for various times at 200-600℃ was calculated using this method. The predicted results are in good agreement with those of the available experiments.展开更多
The effects of alloying elements and processing parameters on the mechanical properties and Portevin-Le Chatelier effect of A1-Mg alloys developed for inner auto body sheets were investigated in detail. Tensile testin...The effects of alloying elements and processing parameters on the mechanical properties and Portevin-Le Chatelier effect of A1-Mg alloys developed for inner auto body sheets were investigated in detail. Tensile testing was performed in various Zn and Mg contents under different annealing and cold-rolling conditions. In the results, the stress drop and reloading time of serrations increase with increasing plastic strain and exhibit a common linear relationship. The increase rates of stress drop and reloading time increase with increasing Mg or Zn content. The alloys with a greater intensity of serrated yielding generally exhibit a greater elongation. The stress drop and reloading time of serrations decrease with increasing grain size in the case of the annealed samples. The cold-rolled sample exhibits the most severe serra- tion because it initially contains a large number of grain boundaries and dislocations.展开更多
In this article the corrosion rate of the austenitic stainless steel type 304, under the synergistic effect of environmental factors has been assessed via potentiodynamic polarization scan.Salinity, velocity, pH and t...In this article the corrosion rate of the austenitic stainless steel type 304, under the synergistic effect of environmental factors has been assessed via potentiodynamic polarization scan.Salinity, velocity, pH and temperature are the factors which induce effects on the corrosion rate of the considered metal.Quantitative analysis is applied using the full two-level factorial experimental design method, which results in the contribution value of each parameter in changing the quantity of average corrosion rate in both individual and synergistic cases.Besides this quantitative analysis, qualitative analysis has been used to predict the variation direction.These two analyses show the important role of the synergistic action, which changes the variation direction of corrosion rate and the contribution percentage of each parameter in varying the value of corrosion rate.Applying both these analyses can show the magnitude and quality of each parameter＇s effect, which is remarkably valuable in marine applications.展开更多
Effect of four commonly used pesticides, triadlmefon, jingganmycin, triazoplos andimidacloprid, on grain growth parameters was examined using a growth equation in thepresent paper. Two hundreds of spikes, not damaged ...Effect of four commonly used pesticides, triadlmefon, jingganmycin, triazoplos andimidacloprid, on grain growth parameters was examined using a growth equation in thepresent paper. Two hundreds of spikes, not damaged by pests were simultaneously markedper plot during the heading stage of rice. Rice plants were sprayed at 1 d after marking.Thereafter, 20 spikes were sampled at 4 d intervals and dried in an oven. Then, 10superior and inferior grains were picked from each spike, and brown rice was weighedafter shelling, respectively. First, second and third order derivates were deduced fromthe following grain growth formula:bt-aKwe1+=, where W was the weight of 100 grains brownrice at time t; K was maximum of grain growth; a and b were parameters of the formula. Theparameters were calculated as following:Where R0, △t, GT and Vmax were initial growth power, active growth stage, accumulativeweight of dried content during △t and maximum growth rate, respectively. The resultshowed that GT and K of superior grain following 22.5 and 45 ga.i.ha-1 of imidaclopridsprays were significantly reduced, and △t was significantly decreased for 112.5 and 225ga.i.ha-1 jingganmycin treatments. In addition, the high dose of imidacloprid signifi-cantly reduced the weight of 1000 rice grains by 9.77%. However, there was no significantdifference for the weight of 1000 grains between the high dose of jingganmycin and thecontrol, indicating that effective duration of jingganmycin on grain filling was shorterthan that of imidacloprid.展开更多
The complex nature of laser-material interaction causes non-stoichiometric ablation of alloy samples.This is attributed to matrix effect, which reduces analyzing capability. To address this issue, the analytical perfo...The complex nature of laser-material interaction causes non-stoichiometric ablation of alloy samples.This is attributed to matrix effect, which reduces analyzing capability. To address this issue, the analytical performance of three different normalization methods, namely normalization with background, internal normalization and three point smoothing techniques at different parameter settings is studied for quantification of Ag and Zn by Laser induced breakdown spectroscopy(LIBS).The LIBS spectra of five known concentration of silver zinc binary composites have been investigated at various laser irradiances(LIs). Calibration curves for both Ag(I) line(4d^(10)5s^2S_(1/2)→4d^(10)5p^2P_(1/2) at 338.28 nm) and Zn(I) line(4s5s^3S_1→4s4p^3P_2 at 481.053 nm) have been determined at LI of 5.86?×?10^(10)W cm^(-2). Slopes of these calibration curves provide the valuation of matrix effect in the Ag–Zn composites. With careful sample preparation and normalization after smoothing at optimum parameter setting(OPS), the minimization of sample matrix effect has been successfully achieved. A good linearity has been obtained in Ag and Zn calibration curve at OPS when normalized the whole area of spectrum after smoothing and the obtained coefficients of determination values were R^2?=?0.995 and 0.998 closer to 1. The results of matrix effect have been further verified by analysis of plasma parameters. Both plasma parameters showed no change with varying concentration at OPS. However, at high concentration of Ag, the observed significant changes in both plasma parameters at common parameter setting PS-1 and PS-2 were the gesture of matrix effect. In our case, the better analytical results were obtained at smoothing function with optimized parameter setting that indicates it is more efficient than normalization with background and internal normalization method.展开更多
Problems frequently encountered in kidney malfunction include abnormal fluid levels in the body, increased acid levels, abnormal levels of Urea, Glucose, Endothelin, β2-Microglobulin and Complement Factor D. Paramete...Problems frequently encountered in kidney malfunction include abnormal fluid levels in the body, increased acid levels, abnormal levels of Urea, Glucose, Endothelin, β2-Microglobulin and Complement Factor D. Parameters characterizing the structure of dialyzers are very important because they decide overall clearance of toxin molecules and at the same time should allow retaining useful molecules in the blood. In this paper, a cross sectional image of the dialyzer membrane with details of the porosity is presented. A multilayered membrane model with different porosity for each layer, describes the actual structure of Polyflux 210H membrane. This model is developed using Finite Element Software—COMSOL Multiphysics 4.3. A blood flow with substances like—Urea, Glucose, Endothelin, β2-Microglobulin, Complement Factor D and Albumin is introduced. For a certain blood flow rate, the toxins diffuse through the membrane and on the other side of the membrane a dialysate flow removes the toxins. Here, different parameters, such as flow rate of blood and dialysate, length and radius of the fiber are changed to simulate how these changes affect toxin clearance and the removal of useful molecules.展开更多
AIM:To analyze the characteristics and correlation of phacoemulsification parameters and anterior segment parameters in cataract patients with different blood glucose levels.METHODS:A total of 45 type 2 diabetic catar...AIM:To analyze the characteristics and correlation of phacoemulsification parameters and anterior segment parameters in cataract patients with different blood glucose levels.METHODS:A total of 45 type 2 diabetic cataract patients(45 eyes)treated in our hospital from March 2023 to April 2024 were stratified into two groups based on glycosylated hemoglobin(HbA1c)levels:group A:HbA1c<7%(n=18)and group B:7%≤HbA1c<8.5%(n=27);a total of 94 age-matched age-related cataract patients(94 eyes)were enrolled as the control group(group C).All underwent phacoemulsification with intraocular lens implantation.Anterior segment parameters,including corneal,lens and anterior chamber measurements,were recorded.Correlations between phacoemulsification parameters and anterior segment parameters were analyzed,and differences among groups were compared.RESULTS:In groups A and B,effective phacoemulsification time(EPT)negatively correlated with corneal endothelial cell density(CECD)(r=-0.315,P=0.035).Average phacoemulsification time(APT)positively correlated with the anterior corneal surface radius of curvature(Rm;r=0.402,P=0.006)and negatively correlated with the flat axis meridian curvature(K 1),steep axis meridian curvature(K 2),mean curvature(Km)of the anterior corneal surface,and lens density at 6 mm zones(PDZ3;all P<0.05).Average phacoemulsification energy(AVE)positively correlated with mean lens density(LD-mean),lens density at 2 mm zones(PDZ1),lens density at 4 mm zones(PDZ2),and PDZ3(all P<0.05),and negatively with pupil diameter(r=-0.385,P=0.009).In the group C,EPT showed a positive correlation with Pentacam nucleus staging(PNS)density grade,PDZ1,PDZ2,and PDZ3(all P<0.05).A positive correlation was observed between AVE and PNS classification(r=0.246,P=0.018).Conversely,AVE exhibited a negative correlation with CECD(r=-0.245,P=0.018).EPT in groups A and B was higher than that in the group C(P<0.05).Both EPT and APT in the group B were higher than those in the group A(P<0.05).In diabetic cataract patients,CECD,corneal density(CD),and posterior corneal surface height positively correlated with diabetes duration(P<0.05).Posterior corneal surface K 1 and Rm positively correlated with 7%≤HbA1c<8.5%(P<0.05).Total corneal astigmatism negatively correlated with HbA1c,2-hour post-breakfast blood glucose(2hPBG),and fasting insulin(FINS;P<0.05).CD and lens thickness(LT)positively correlated with FINS(P<0.05).CONCLUSION:Phacoemulsification parameters and blood glucose-related indices exhibited varying degrees of correlation with anterior segment parameters in cataract patients with different blood glucose levels.EPT in diabetic cataract patients was higher than that in age-related cataract patients,while EPT and APT in diabetic cataract patients with poor glycemic control were higher than those with good glycemic control.展开更多
To evaluate the effect of pulse parameters on the formation of electrodeposits in concrete cracks, five different types of pulse current were set up, and ZnSO_4 and MgSO_4 solutions were used as the electrolytes. The ...To evaluate the effect of pulse parameters on the formation of electrodeposits in concrete cracks, five different types of pulse current were set up, and ZnSO_4 and MgSO_4 solutions were used as the electrolytes. The rate of weight gain, rate of surface coating, rate of crack closure and crack filling depth were measured. Scanning electron microscopy was used to assess the morphology of the electrodeposits, and energy dispersive spectroscopy was used to analyze the mineral composition of the electrodeposits in the cracks. The experimental results demonstrate that, among five different pulse parameters, when T_（on）/T_（off）=0.8 ms/0.8 ms, the healing effect of electro-deposition is the best. The pulse mode hardly affects the mineral composition of the electrodeposits but changes the micromorphology. In addition, for both ZnSO_4 and MgSO_4 solutions, when T_（on）/T_（off）=0.8 ms/0.8 ms, the crystal structure of the electrodeposits is the most uniform and the densest.展开更多
In this paper, a quantitative analysis of the opening quality in friction spinning and its main ef-fecting factors is first made. Upon this basis the Box-Hunter’s experimental design method is usedto establish the qu...In this paper, a quantitative analysis of the opening quality in friction spinning and its main ef-fecting factors is first made. Upon this basis the Box-Hunter’s experimental design method is usedto establish the quadratic regressional equations in terms of primary opening technologicalparameters and yarn quality for medium and fine count friction spinning. The results of analysisand discussion show that the proper choice of opening roller speed and its reasonable match withthe yarn count is singificant for ensuring the spinning quality index as well as reducing unevenness,thin and thick places of the yarn.展开更多
To overcome the problems of natural decreases in power quality,and to eliminate wind speed fluctuation due to wind shear and tower shadow effect arising from wind turbine structural parameters,an improved prediction m...To overcome the problems of natural decreases in power quality,and to eliminate wind speed fluctuation due to wind shear and tower shadow effect arising from wind turbine structural parameters,an improved prediction model accounting for the dual effect of wind shear and tower shadow is,in this paper,built.Compared to the conventional prediction model,the proposed model contains a new constraint condition,which makes the disturbance term caused by the tower shadow effect always negative so that the prediction result is closer to the actual situation.Furthermore,wind turbine structural parameters such as hub height,rotor diameter,the diameter of the tower top,and rotor overhang on wind shear and tower shadow effect are also explored in detail.The results show that the wind shear effect became weaker with the increase in hub height.The hub height is independent of the tower shadow effect.The rotor diameter is positively correlated with the wind shear and tower shadow effect.The tower shadow effect is positively correlated with the diameter of the tower top and negatively correlated with the rotor overhang.展开更多
The EPR parameters of trivalent Er（3＋） ions doped in hexagonal Ga N crystal have been studied by diagonalizing the 364×364 complete energy matrices. The results indicate that the resonance ground states may be...The EPR parameters of trivalent Er（3＋） ions doped in hexagonal Ga N crystal have been studied by diagonalizing the 364×364 complete energy matrices. The results indicate that the resonance ground states may be derived from the Kramers doublet Γ6. The EPR g-factors may be ascribed to the stronger covalent bonding and nephelauxetic effects compared with other rare-earth doped complexes, as a result of the mismatch of ionic radii of the impurity Er（3＋）ion and the replaced Ga（3＋） ion apart from the intrinsic covalency of host Ga N. Furthermore, the J–J mixing effects on the EPR parameters from the high-lying manifolds have been evaluated. It is found that the dominant J–J mixing contribution is from the manifold 2K（15/2）, which accounts for about 2.5%. The next important J–J contribution arises from the crystal–field mixture between the ground state 4I（15/2） and the first excited state4I（13/2）, and is usually less than 0.2%. The contributions from the rest states may be ignored.展开更多
基金financially supported by the Natural Science Foundation of Sichuan Province(Grant Nos.2023NSFSC0767 and2024NSFSC0809)the China Postdoctoral Science Foundation(Grant No.2024MF750281)the Postdoctoral Fellowship Program of CPSF(Grant No.GZC20230326)。
文摘Predictions of fluid distribution,stress field,and natural fracture are essential for exploiting unconventional shale gas reservoirs.Given the high likelihood of tilted fractures in subsurface formations,this study focuses on simultaneous seismic inversion to estimate fluid bulk modulus,effective stress parameter,and fracture density in the tilted transversely isotropic(TTI)medium.In this article,a novel PP-wave reflection coefficient approximation equation is first derived based on the constructed TTI stiffness matrix incorporating fracture density,effective stress parameter,and fluid bulk modulus.The high accuracy of the proposed equation has been demonstrated using an anisotropic two-layer model.Furthermore,a stepwise seismic inversion strategy with the L_(P) quasi-norm sparsity constraint is implemented to obtain the anisotropic and isotropic parameters.Three synthetic model tests with varying signal-to-noise ratios(SNRs)confirm the method's feasibility and noise robustness.Ultimately,the proposed method is applied to a 3D fractured shale gas reservoir in the Sichuan Basin,China.The results have effectively characterized shale gas distribution,stress fields,and tilted natural fractures,with validation from geological structures,well logs,and microseismic events.These findings can provide valuable guidance for hydraulic fracturing development,enabling more reliable predictions of reservoir heterogeneity and completion quality.
基金supported by the National Natural Science Foundation of China(72071111,71801127,71671091)the NSFC and the UK Royal Society joint project(71811530338)+2 种基金the Special Postdoctoral Fund of China(2019TQ0150)the Fundamental Research Funds for the Central Universities of China(NC2019003)the Intelligence Introduction Base of the Ministry of Science and Technology(G20190010178)。
文摘Effectiveness evaluation of the joint operation system is an important basis for the demonstration and development of weapon equipment.With the consideration that existing models of system effectiveness evaluation seldom describe the structural relationship among equipment clearly as well as reflect the dynamic,the analog-to-digital converter-graphical evaluation and review technique(ADC-GERT)network parameter estimation model is proposed based on the ADC model and the joint operation system structure.Firstly,analysis of the joint operation system structure and operation process is conducted to build the GERT network,where equipment subsystems are nodes and activities are directed arches.Then the mission effectiveness of equipment subsystems is calculated by the ADC model.The probability transfer parameters are modified by the mission effectiveness of equipment subsystems based on the Bayesian theorem,with the ADC-GERT network parameter estimation model constructed.Finally,a case study is used to validate the efficiency and dynamic of the ADC-GERT network parameter estimation model.
基金Project supported by the National Natural Science Foundation of China(Grant No10647109)
文摘The values of effective breeding coefficient Keff in a reactor core of nuclear power plant are calculated for different values of parameters （core structure, fuel assembly component） by using the Monte Carlo method. The obtained values of Keff are compared and analysed, which can provide theoretical basis for reactor design.
基金This work is supported by the National Natural Science Foundation of China(No.61471390).
文摘As the platform for surface-source infrared decoys,the target aircraft is the aim of attacks in air-to-air combat.It can quickly and accurately evaluate the jamming effectiveness of the surface-source IR decoy in various states of motion is important for enhancing the security of the aircraft.This paper proposes a model of surface-source IR decoy,and compares and analyzes simulated and measured infrared images of diffusion.A system to assess the effectiveness of the jamming of the surface-source IR decoy,target aircraft,and infrared guided missile called“Trinity”is established.Simulations were conducted to assess the impact of flight height,flight speed,and the maneuvering of the target aircraft on the jamming effectiveness of the surface-source IR decoy.The results show that with an increase in flight height and speed,the jamming probability of a surface-source IR decoy first increases and then decreases,where evasive maneuvering by the target aircraft can effectively improve this probability.When the radius of the vertical snake maneuver was 125 m,that of the horizontal snake maneuver was 200 m,and the radius of the barrel roll maneuver was 250 m,the jamming probability of the surface-source IR decoy was relatively high.By comparing the simulation results with measured data,the study verified the accuracy of the proposed method.
基金Project supported by the National Natural Science Foundation of China(Grant No.11872013).
文摘The equivalent medium theory of metamaterials provides a way to obtain their effective constitutive parameters.However,because of its non-reciprocity,the complexity of the electromagnetic coupling,and a metallic bottom layer,it has been challenging to retrieve them from a metamaterial absorber.In this paper,we propose a method without any approximation to obtain them,in which the non-reciprocity and the strong electromagnetic coupling are included.Compared with the three methods such as symmetric metamaterial method,asymmetric metamaterial method and metasurface method,our method can reveal the metamaterial absorber’s electrical and magnetic resonance and show its electromagnetic coupling coefficients.To deal with a metamaterial absorber with a metallic bottom layer,four corners of the metallic bottom layer in the unit cell are removed,making it possible to retrieve the electromagnetic parameters.Surprisingly,these results show that the metamaterial absorber with a metallic bottom layer in our example operates in a negative refraction state at the half absorption frequencies,which helps further understand the absorbing mechanism of these metamaterial absorbers.
文摘Quality factors for protons and helium particles has determined for cell inactivation using linear energy transfer. The quality has also been investigated as a function for other physical parameters, such as mean free path and effective charge for protons and helium particles, for a better interpretation to the effectiveness of these charged particles in V79 cells. Explanation of quality is clearly illustrated in terms of the average dis-tance of energy deposition events in biological systems.
文摘Objective The purpose of the study was to investigate the effective parameters of electric cortex stimulation (ECS) for functional brain mapping. Methods We collected 21 subjects who underwent epilepsy surgeries consecutively in Beijing Institute of Functional Neurosurgery with the epileptogenic zone located in perirolandic areas from
基金Supported by Earmarked Fund for Modern Rapeseed Research System of China(nycytx-00563)High-oil Hybrid Brassica napus Rapeseed Cultivation Technology Research Program of Guizhou Academy of Agricultural Sciences [ZX (2007)015]+2 种基金New High-yield Rapeseed Cultivar Yoyan 599 Cultivation and Promotion Program of Agriculture department of Guizhou Province [(2009)007]Hybrid Rapeseed Culitivar Youyan 599 Promotion Test Program of Guizhou Academy of Agricultural Sciences[(2009)030]New High-oil Rapeseed Cultivar Sanbei 98 Cultivation and Promotion Program of Agriculture Department of Guizhou Province [(2010)3087]~~
文摘[Objective] This study aimed to investigate the combined effects of sowing date, plant density, nitrogenous fertilizer, phosphorus fertilizer and potassium fertilizer on quality parameters of high grade hybrid rapeseed. [Method] By using Youyan 599 and Sanbei 98 as experimental materials, quadratic orthogonal rotation combination with five factors was designed for this study. [Result] Erucic acid content was nega- tively correlated with sowing date and nitrogen fertilizer, positively correlated with plant density. Glucosinolate content was negatively correlated with sowing date, positively correlated with potash fertilizer amount. Oil content was negatively correlated with sowing date and nitrogen fertilizer amount, positively correlated with plant density and potash fertilizer amount. Protein content was positively correlated with sowing date and nitrogen fertilizer amount, negatively correlated with plant density and potash fer- tilizer amount. Oleic acid content was negatively correlated with phosphate fertilizer amount, positively correlated with nitrogen fertilizer amount. Palmitic acid was nega- tively correlated with potash fertilizer amount, positively correlated with sowing date, plant density, nitrogen fertilizer amount and phosphate fertilizer amount in Youyan 599, but negatively correlated with sowing date, plant density, nitrogen fertilizer amount and phosphate fertilizer amount in Sanbei 98. Stearic acid content was posi- tively correlated with sowing date, plant density, nitrogen fertilizer amount and phos- phate fertilizer amount. Linoleic acid was positively correlated with density and nitroge- nous fertilizer, but negatively correlated with potash fertilizer amount. Linolenic acid was positively correlated with nitrogen fertilizer amount and potash fertilizer amount. Eicosenoic acid was negatively correlated with sowing date. There were positive cor- relations and negative correlations among cultivation conditions and quality parame- ters, and the positive correlations and negative correlations could counteract each other. Expression of quality parameters for each treatment was the combined effect. Among the 50 pairs of simple correlations of five cultivation factors and ten quality parameters, 26 pairs were consistent between two varieties, 24 pairs of simple corre- lation were not. Sowing date, plant density, nitrogen fertilizer amount and phosphate fertilizer amount showed significant influence on erucic acid of two varieties, but small effect on palmitic acid. [Conclusion] The combined effect of the five cultivation factors could not fundamentally improve the quality traits of high grade hybrid rapeseed.
基金supported by National Key Basic Research Program of China(2013CB127300)Natural Science Foundation of China(31430082)
文摘Backgroud： This study aimed to determine the effects of early antibiotic intervention（EAI） on subsequent blood parameters, apparent nutrient digestibility, and fecal fermentation profile in pigs with different dietary crude protein（CP） levels. Eighteen litters of piglets（total 212） were randomly allocated to 2 groups and were fed a creep feed diet with or without in-feed antibiotics（olaquindox, oxytetracycline calcium and kitasamycin） from postnatal d 7 to d 42. On d 42, the piglets within the control or antibiotic group were mixed, respectively, and then further randomly assigned to a normal-（20%, 18%, and 14% CP from d 42 to d 77, d 77 to d 120, and d 120 to d 185,respectively） or a low-CP diet（16%, 14%, and 10% CP from d 42 to d 77, d 77 to d 120, and d 120 to d 185,respectively）, generating 4 groups. On d 77（short-term） and d 185（long-term）, serum and fecal samples were obtained for blood parameters, microbial composition and microbial metabolism analysis.Results： EAI increased（P 〈 0.05） albumin and glucose concentrations in low-CP diet on d 77, and increased（P 〈 0.05） urea concentration in normal-CP diet. On d 185, EAI increased（P 〈 0.05） globulin concentration in normal-CP diets, but decreased glucose concentration. For nutrient digestibility, EAI increased（P 〈 0.05）digestibility of CP on d 77. For fecal microbiota, the EAI as well as low-CP diet decreased（P 〈 0.05） E. coli count on d 77. For fecal metabolites, on d 77, EAI decreased（P 〈 0.05） total amines concentration but increased skatole concentration in low-CP diet. On d 185, the EAI increased（P 〈 0.05） putrescine and total amines concentrations in low-CP diets but reduced（P 〈 0.05） in the normal-CP diets. The low-CP diet decreased the concentrations of these compounds.Conclusions： Collectively, these results indicate that EAI has short-term effects on the blood parameters and fecal microbial fermentation profile. The effects of EAI varied between CP levels, which was characterized by the significant alteration of glucose and putrescine concentration.
文摘Through the differentiating and integrating process, a mathematical model for tempering time effect on quenched steel was derived based on the attribute of state function and the general equation of Hollomon parameter, which correlates the tempering hardness with the tempering time at different tempering temperature. Using the established model, the linear relationship between the tempering hardness and the tempering time in logarithm was proved theoretically, and the tempering hardness for various tempering time was reduced to the measurement and calculation of a hardness experiment tempered for 1 h at different tempering temperatures. Moreover, the hardness of steel 42CrMo and T8Mn tempered for various times at 200-600℃ was calculated using this method. The predicted results are in good agreement with those of the available experiments.
基金financially supported by the National Natural Science Foundation of China(No.51301017)the Fundamental Research Funds for the Central Universities of China(No.FRF-TP-13-034A)
文摘The effects of alloying elements and processing parameters on the mechanical properties and Portevin-Le Chatelier effect of A1-Mg alloys developed for inner auto body sheets were investigated in detail. Tensile testing was performed in various Zn and Mg contents under different annealing and cold-rolling conditions. In the results, the stress drop and reloading time of serrations increase with increasing plastic strain and exhibit a common linear relationship. The increase rates of stress drop and reloading time increase with increasing Mg or Zn content. The alloys with a greater intensity of serrated yielding generally exhibit a greater elongation. The stress drop and reloading time of serrations decrease with increasing grain size in the case of the annealed samples. The cold-rolled sample exhibits the most severe serra- tion because it initially contains a large number of grain boundaries and dislocations.
文摘In this article the corrosion rate of the austenitic stainless steel type 304, under the synergistic effect of environmental factors has been assessed via potentiodynamic polarization scan.Salinity, velocity, pH and temperature are the factors which induce effects on the corrosion rate of the considered metal.Quantitative analysis is applied using the full two-level factorial experimental design method, which results in the contribution value of each parameter in changing the quantity of average corrosion rate in both individual and synergistic cases.Besides this quantitative analysis, qualitative analysis has been used to predict the variation direction.These two analyses show the important role of the synergistic action, which changes the variation direction of corrosion rate and the contribution percentage of each parameter in varying the value of corrosion rate.Applying both these analyses can show the magnitude and quality of each parameter＇s effect, which is remarkably valuable in marine applications.
基金supported by the National Natural Science Foundation of China(30070122).
文摘Effect of four commonly used pesticides, triadlmefon, jingganmycin, triazoplos andimidacloprid, on grain growth parameters was examined using a growth equation in thepresent paper. Two hundreds of spikes, not damaged by pests were simultaneously markedper plot during the heading stage of rice. Rice plants were sprayed at 1 d after marking.Thereafter, 20 spikes were sampled at 4 d intervals and dried in an oven. Then, 10superior and inferior grains were picked from each spike, and brown rice was weighedafter shelling, respectively. First, second and third order derivates were deduced fromthe following grain growth formula:bt-aKwe1+=, where W was the weight of 100 grains brownrice at time t; K was maximum of grain growth; a and b were parameters of the formula. Theparameters were calculated as following:Where R0, △t, GT and Vmax were initial growth power, active growth stage, accumulativeweight of dried content during △t and maximum growth rate, respectively. The resultshowed that GT and K of superior grain following 22.5 and 45 ga.i.ha-1 of imidaclopridsprays were significantly reduced, and △t was significantly decreased for 112.5 and 225ga.i.ha-1 jingganmycin treatments. In addition, the high dose of imidacloprid signifi-cantly reduced the weight of 1000 rice grains by 9.77%. However, there was no significantdifference for the weight of 1000 grains between the high dose of jingganmycin and thecontrol, indicating that effective duration of jingganmycin on grain filling was shorterthan that of imidacloprid.
基金supported by National Natural Science Foundation of China (Nos. 11475039, 11705020, 11605023)Liaoning Provincial Natural Science Foundation of China (No. 20170540153)
文摘The complex nature of laser-material interaction causes non-stoichiometric ablation of alloy samples.This is attributed to matrix effect, which reduces analyzing capability. To address this issue, the analytical performance of three different normalization methods, namely normalization with background, internal normalization and three point smoothing techniques at different parameter settings is studied for quantification of Ag and Zn by Laser induced breakdown spectroscopy(LIBS).The LIBS spectra of five known concentration of silver zinc binary composites have been investigated at various laser irradiances(LIs). Calibration curves for both Ag(I) line(4d^(10)5s^2S_(1/2)→4d^(10)5p^2P_(1/2) at 338.28 nm) and Zn(I) line(4s5s^3S_1→4s4p^3P_2 at 481.053 nm) have been determined at LI of 5.86?×?10^(10)W cm^(-2). Slopes of these calibration curves provide the valuation of matrix effect in the Ag–Zn composites. With careful sample preparation and normalization after smoothing at optimum parameter setting(OPS), the minimization of sample matrix effect has been successfully achieved. A good linearity has been obtained in Ag and Zn calibration curve at OPS when normalized the whole area of spectrum after smoothing and the obtained coefficients of determination values were R^2?=?0.995 and 0.998 closer to 1. The results of matrix effect have been further verified by analysis of plasma parameters. Both plasma parameters showed no change with varying concentration at OPS. However, at high concentration of Ag, the observed significant changes in both plasma parameters at common parameter setting PS-1 and PS-2 were the gesture of matrix effect. In our case, the better analytical results were obtained at smoothing function with optimized parameter setting that indicates it is more efficient than normalization with background and internal normalization method.
文摘Problems frequently encountered in kidney malfunction include abnormal fluid levels in the body, increased acid levels, abnormal levels of Urea, Glucose, Endothelin, β2-Microglobulin and Complement Factor D. Parameters characterizing the structure of dialyzers are very important because they decide overall clearance of toxin molecules and at the same time should allow retaining useful molecules in the blood. In this paper, a cross sectional image of the dialyzer membrane with details of the porosity is presented. A multilayered membrane model with different porosity for each layer, describes the actual structure of Polyflux 210H membrane. This model is developed using Finite Element Software—COMSOL Multiphysics 4.3. A blood flow with substances like—Urea, Glucose, Endothelin, β2-Microglobulin, Complement Factor D and Albumin is introduced. For a certain blood flow rate, the toxins diffuse through the membrane and on the other side of the membrane a dialysate flow removes the toxins. Here, different parameters, such as flow rate of blood and dialysate, length and radius of the fiber are changed to simulate how these changes affect toxin clearance and the removal of useful molecules.
文摘AIM:To analyze the characteristics and correlation of phacoemulsification parameters and anterior segment parameters in cataract patients with different blood glucose levels.METHODS:A total of 45 type 2 diabetic cataract patients(45 eyes)treated in our hospital from March 2023 to April 2024 were stratified into two groups based on glycosylated hemoglobin(HbA1c)levels:group A:HbA1c<7%(n=18)and group B:7%≤HbA1c<8.5%(n=27);a total of 94 age-matched age-related cataract patients(94 eyes)were enrolled as the control group(group C).All underwent phacoemulsification with intraocular lens implantation.Anterior segment parameters,including corneal,lens and anterior chamber measurements,were recorded.Correlations between phacoemulsification parameters and anterior segment parameters were analyzed,and differences among groups were compared.RESULTS:In groups A and B,effective phacoemulsification time(EPT)negatively correlated with corneal endothelial cell density(CECD)(r=-0.315,P=0.035).Average phacoemulsification time(APT)positively correlated with the anterior corneal surface radius of curvature(Rm;r=0.402,P=0.006)and negatively correlated with the flat axis meridian curvature(K 1),steep axis meridian curvature(K 2),mean curvature(Km)of the anterior corneal surface,and lens density at 6 mm zones(PDZ3;all P<0.05).Average phacoemulsification energy(AVE)positively correlated with mean lens density(LD-mean),lens density at 2 mm zones(PDZ1),lens density at 4 mm zones(PDZ2),and PDZ3(all P<0.05),and negatively with pupil diameter(r=-0.385,P=0.009).In the group C,EPT showed a positive correlation with Pentacam nucleus staging(PNS)density grade,PDZ1,PDZ2,and PDZ3(all P<0.05).A positive correlation was observed between AVE and PNS classification(r=0.246,P=0.018).Conversely,AVE exhibited a negative correlation with CECD(r=-0.245,P=0.018).EPT in groups A and B was higher than that in the group C(P<0.05).Both EPT and APT in the group B were higher than those in the group A(P<0.05).In diabetic cataract patients,CECD,corneal density(CD),and posterior corneal surface height positively correlated with diabetes duration(P<0.05).Posterior corneal surface K 1 and Rm positively correlated with 7%≤HbA1c<8.5%(P<0.05).Total corneal astigmatism negatively correlated with HbA1c,2-hour post-breakfast blood glucose(2hPBG),and fasting insulin(FINS;P<0.05).CD and lens thickness(LT)positively correlated with FINS(P<0.05).CONCLUSION:Phacoemulsification parameters and blood glucose-related indices exhibited varying degrees of correlation with anterior segment parameters in cataract patients with different blood glucose levels.EPT in diabetic cataract patients was higher than that in age-related cataract patients,while EPT and APT in diabetic cataract patients with poor glycemic control were higher than those with good glycemic control.
基金the National Natural Science Foundation(Nos.51479051,51778209,51609075,and 51508158)the Fundamental Research Funds for the Central Universities(2016B08414)the National Key R&D Program of China(Nos.2016YFC0401610 and2016YFC0401804)
文摘To evaluate the effect of pulse parameters on the formation of electrodeposits in concrete cracks, five different types of pulse current were set up, and ZnSO_4 and MgSO_4 solutions were used as the electrolytes. The rate of weight gain, rate of surface coating, rate of crack closure and crack filling depth were measured. Scanning electron microscopy was used to assess the morphology of the electrodeposits, and energy dispersive spectroscopy was used to analyze the mineral composition of the electrodeposits in the cracks. The experimental results demonstrate that, among five different pulse parameters, when T_（on）/T_（off）=0.8 ms/0.8 ms, the healing effect of electro-deposition is the best. The pulse mode hardly affects the mineral composition of the electrodeposits but changes the micromorphology. In addition, for both ZnSO_4 and MgSO_4 solutions, when T_（on）/T_（off）=0.8 ms/0.8 ms, the crystal structure of the electrodeposits is the most uniform and the densest.
文摘In this paper, a quantitative analysis of the opening quality in friction spinning and its main ef-fecting factors is first made. Upon this basis the Box-Hunter’s experimental design method is usedto establish the quadratic regressional equations in terms of primary opening technologicalparameters and yarn quality for medium and fine count friction spinning. The results of analysisand discussion show that the proper choice of opening roller speed and its reasonable match withthe yarn count is singificant for ensuring the spinning quality index as well as reducing unevenness,thin and thick places of the yarn.
基金funded by the National Natural Science Foundation of China(51866012).
文摘To overcome the problems of natural decreases in power quality,and to eliminate wind speed fluctuation due to wind shear and tower shadow effect arising from wind turbine structural parameters,an improved prediction model accounting for the dual effect of wind shear and tower shadow is,in this paper,built.Compared to the conventional prediction model,the proposed model contains a new constraint condition,which makes the disturbance term caused by the tower shadow effect always negative so that the prediction result is closer to the actual situation.Furthermore,wind turbine structural parameters such as hub height,rotor diameter,the diameter of the tower top,and rotor overhang on wind shear and tower shadow effect are also explored in detail.The results show that the wind shear effect became weaker with the increase in hub height.The hub height is independent of the tower shadow effect.The rotor diameter is positively correlated with the wind shear and tower shadow effect.The tower shadow effect is positively correlated with the diameter of the tower top and negatively correlated with the rotor overhang.
基金Project supported by the Foundation of Education Department of Shaanxi Province,China(Grant No.16JK1402)
文摘The EPR parameters of trivalent Er（3＋） ions doped in hexagonal Ga N crystal have been studied by diagonalizing the 364×364 complete energy matrices. The results indicate that the resonance ground states may be derived from the Kramers doublet Γ6. The EPR g-factors may be ascribed to the stronger covalent bonding and nephelauxetic effects compared with other rare-earth doped complexes, as a result of the mismatch of ionic radii of the impurity Er（3＋）ion and the replaced Ga（3＋） ion apart from the intrinsic covalency of host Ga N. Furthermore, the J–J mixing effects on the EPR parameters from the high-lying manifolds have been evaluated. It is found that the dominant J–J mixing contribution is from the manifold 2K（15/2）, which accounts for about 2.5%. The next important J–J contribution arises from the crystal–field mixture between the ground state 4I（15/2） and the first excited state4I（13/2）, and is usually less than 0.2%. The contributions from the rest states may be ignored.
