X65, X70, and X80 belong to high grade pipeline steels. Toughness is one of the most important properties of pipeline steels when the pipeline transports the gas or oil, and the means to control toughness is very impo...X65, X70, and X80 belong to high grade pipeline steels. Toughness is one of the most important properties of pipeline steels when the pipeline transports the gas or oil, and the means to control toughness is very important for exploring even higher grade pipeline steels. We established the relationship between toughness and crystallographic parameters of high grade pipeline steels by studying the crystallographic parameters of X65, X70, and X80 using EBSD and analyzing Charpy CVN of X65, X70 and X80. The results show that the effective grain size, the frequency distribution of grain boundary misorientation and the ratio of high angle grain boundary to small angle grain boundary are important parameters. The finer the effective grain size, and the higher the frequency distribution of grain boundaries （〉 50~）, the more excellent toughness of high grade pipeline steels will be.展开更多
The effect of cooling rate on microstructure and effective grain size(EGS)of a Ni-Cr-Mo-B high-strength steel has been studied by dilatometer,field emission scanning electron microscopy(FESEM),transmission electron mi...The effect of cooling rate on microstructure and effective grain size(EGS)of a Ni-Cr-Mo-B high-strength steel has been studied by dilatometer,field emission scanning electron microscopy(FESEM),transmission electron microscopy(TEM)and electron backscattered diffraction(EBSD).The results show that the microstructure of the Ni-Cr-Mo-B steel is dependent on cooling rate in the following sequence:lath martensite(LM),mixed LM and lath bainite(LB),mixed LB and granular bainite(GB)and GB.The critical cooling rates for appearance of LB and GB are about 10℃/s and 0.5℃/s,respectively.The LM(>10℃/s)consists of few blocky regions with a width of several micros.Compared with the lath regions,the blocky regions in LM form at higher actual transformation temperatures during cooling.The blocky region area percentage in LM keeps almost constant about 8%at different cooling rates(>10℃/s)due to similar martensite transformation starting temperature(M_(s)).The LB percentage in mixed LM/LB increases gradually with decreasing cooling rate(10-0.5℃/s).The EBSD results show that different microstructures have different EGS.The mixed LM/LB exhibits the smallest EGS due to the separation of the prior austenite grains by the pre-formed LB and the refinement of the LM.Meanwhile,the mixed LM/LB at different cooling rates(10-0.5℃/s)exhibits almost the same EGS because the LB and LM in the mixed LM/LB have a similar high-angle grain boundary density and similar EGS.Because the blocky regions contain few high-angle grain boundaries and have similar area percentages in the LM,the LM at different cooling rates(>10℃/s)exhibits almost the same EGS.The ferrite in GB exhibits as a whole with few high-angle grain boundaries;thus,the mixed LB/GB exhibits the largest EGS.展开更多
Mg-3Gd(wt.%)samples with different initial grain sizes were prepared to evaluate the grain size effect on microstructural evolution during cold rolling and subsequent annealing hardening response.The deformation behav...Mg-3Gd(wt.%)samples with different initial grain sizes were prepared to evaluate the grain size effect on microstructural evolution during cold rolling and subsequent annealing hardening response.The deformation behavior and mechanical response of the as-rolled and annealed samples were systematically investigated by a combination of electron microscopy and microhardness characterization.The results show that the twinning activities were highly suppressed in the fine-grained samples during rolling.Upon increasing the rolling reduction to 40%,ultra-fine grain structures with a volume fraction of∼28%were formed due to the activation of multiple slip systems.Conversely,twinning dominated the early stages of deformation in the coarse-grained samples.After a 10%rolling reduction,numerous twins with a volume fraction of∼23%were formed.Further increasing the rolling reduction to 40%,high-density dislocations were activated and twin structures with a volume fraction of∼36%were formed.The annealing hardening response of deformed samples was effectively enhanced compared to that of the non-deformed samples,which was attributed to the enhanced Gd segregation along grain boundaries,twin boundaries and dislocation cores.Moreover,the grain size and rolling reduction were found to affect the microstructure evolution during annealing,resulting in a notable difference in the annealing hardening response of Mg-3Gd alloy between samples of different grain sizes deformed to different strains.These findings highlight the crucial importance of microstructural and processing parameters in the design of high-strength,cost-effective Mg alloys.展开更多
Addition of Al-5Ti-1B alloy to molten aluminum alloys can refine α-Al grains effectively and thereby improve their strength and toughness. TiAl;and TiB;in Al-5Ti-1B alloy are the main secondary-phase particles for re...Addition of Al-5Ti-1B alloy to molten aluminum alloys can refine α-Al grains effectively and thereby improve their strength and toughness. TiAl;and TiB;in Al-5Ti-1B alloy are the main secondary-phase particles for refinement, while the understanding on the effect of their sizes on α-Al grain refinement continues to be fragmented. Therefore, Al-5Ti-1B alloys with various sizes and morphologies of the secondary-phase particles were prepared by equal channel angular pressing（ECAP）. Evolution of the secondary-phase particles during ECAP process and their impact on α-Al grain refinement were studied by X-ray diffraction and scanning electron microscope（SEM）. Results show that during the ECAP process, micro-cracks firstly appeared inside TiAl;particles and then gradually expanded, which resulted in continuous refinement of TiAl;particles. In addition, micro-distribution uniformity of TiB;particles was improved due to the impingement of TiAl;particles to TiB;clusters during deformation. Excessively large sizes of TiAl;particles would reduce the number of effective heterogeneous nucleus and thus resulted in poor grain refinement effectiveness. Moreover, excessively small TiAl;particles would reduce inhibitory factors for grain growth Q and weaken grain refinement effectiveness. Therefore, an optimal size range of 18-22 μm for TiAl;particles was suggested.展开更多
In order to clarify the influence of grain size on cyclic deformation response of superalloy sheets and springback behavior,cyclic loading-unloading and shearing tests were performed on the superalloy foils with 0.2 m...In order to clarify the influence of grain size on cyclic deformation response of superalloy sheets and springback behavior,cyclic loading-unloading and shearing tests were performed on the superalloy foils with 0.2 mm in thickness and diverse grain sizes.The results show that,the decline ratio of elastic modulus is weakened with increasing grain size,and the Bauschinger effect becomes evident with decreasing grain size.Meanwhile,U-bending test results determine that the springback is diminished with increasing grain size.The Chaboche,Anisotropic Nonlinear Kinematic(ANK)and Yoshida-Uemori(Y-U)models were utilized to fit the shear stress-strain curves of specimens.It is found that Y-U model is sufficient of predicting the springback.However,the prediction accuracy is degraded with increasing grain size.展开更多
The systematic investigation of the mechanical properties and microstructure evolution process of ultra-thin-walled Inconel 718 capillary brazing joints is of great significance because of the exceptionally high deman...The systematic investigation of the mechanical properties and microstructure evolution process of ultra-thin-walled Inconel 718 capillary brazing joints is of great significance because of the exceptionally high demands on its application.To achieve this objective,this study investigates the impact of three distinct brazing temperatures and five typical grain sizes on the brazed joints’mechanical properties and microstructure evolution process.Microstructural evolution analysis was conducted based on Electron Back Scatter Diffraction(EBSD),Scanning Electron Microscopy(SEM),X-Ray Diffraction(XRD),High-Resolution Transmission Electron Microscopy(HRTEM),and Focused Ion Beam(FIB).Besides,the mechanical properties and fracture behavior were studied based on the uniaxial tension tests and in-situ tension tests.The findings reveal that the brazing joint’s strength is higher for the fine-grain capillary than the coarse-grain one,primarily due to the formation of a dense branch structure composed of G-phase in the brazing seam.The effects of grain size,such as pinning and splitting,are amplified at higher brazing temperatures.Additionally,micro-cracks initiate around brittle intermetallic compounds and propagate through the eutectic zone,leading to a cleavage fracture mode.The fracture stress of fine-grain specimens is higher than that of coarse-grain due to the complex micro-crack path.Therefore,this study contributes significantly to the literature by highlighting the crucial impact of grain size on the brazing properties of ultra-thin-walled Inconel 718 structures.展开更多
In the present study,room-temperature compression experiments and characterization experiments via optical microstructure(OM),X-ray diffractometer(XRD)and electron backscattered diffraction(EBSD)techniques were conduc...In the present study,room-temperature compression experiments and characterization experiments via optical microstructure(OM),X-ray diffractometer(XRD)and electron backscattered diffraction(EBSD)techniques were conducted on WE43 magnesium(Mg)alloy samples to investigate the grain size effect on twinning behavior.Three couples of solution treatments(823 K for 0.5 h,798 K for 8 h,823 K for 16 h,followed by water-quenching at~333 K)were adopted and these solutionized samples are with different grain sizes of 48.5,72.0 and 120.2μm,respectively.Results show that{10-12}extension twin(ET)and{11-21}ET serve as major twinning modes during plastic deformation.For all 7.7%-deformed samples,although the volume fractions of{10-12}ETs and{11-21}ETs increase with the increasing grain size.{10-12}ETs are in growth stage,while{11-21}ETs are mainly in nucleation stage and they still maintain narrow and parallel to each other.Besides,{10-12}ETs mainly contribute to the rotation of caxes of grains towards compression direction,while{11-21}ETs mainly contribute to the formation of a nearly ring-shaped texture component in(0002)pole figure.Twin variants analysis with the assistance of Schmid factor(SF)demonstrates that the activation of twin variants mainly obeys Schmid law.When only{10-12}ETs occur in individual grains,the maximum number of twin variants shows some positive relationship with the increasing grain size.By comparison,when both{10-12}ETs and{11-21}ETs occur in individual grains,the maximum numbers of twin variants are rarely influenced by the increasing grain size.展开更多
Barium titanate[BaTiO_(3)(BT)]-based ceramics are typical ferroelectric materials.Here,the discontinuous grain growth(DGG)and relevant grain size effect are deeply studied.An obvious DGG phenomenon is observed in a pa...Barium titanate[BaTiO_(3)(BT)]-based ceramics are typical ferroelectric materials.Here,the discontinuous grain growth(DGG)and relevant grain size effect are deeply studied.An obvious DGG phenomenon is observed in a paradigmatic Zr^(4+)-doped BT-based ceramic,with grains growing from∼2.2–6.6 to∼121.8–198.4μm discontinuously near 1320℃.It is found that fine grains can get together and grow into large ones with liquid phase surrounding them above eutectic temperature.Then the grain boundary density(D g)is quantitatively studied and shows a first-order reciprocal relationship with grain size,and the grain size effect is dependent on D g.Fine grains lead to high D g,and then cause fine domains and pseudocubic-like phase structure because of the interrupted long-range ferroelectric orders by grain boundary.High D g also causes the diffusion phase transition and low Curie dielectric peak due to the distribution of phase transition temperature induced by internal stress.Local domain switching experiments reveal that the polarization orientation is more difficult near the grain boundary,implying that the grain boundary inhibition dominates the process of polarization orientation in fine-grain ceramics,which leads to low polarization but a high coercive field.However,large-grain ceramics exhibit easy domain switching and high&similar ferroelectricity.This work reveals that the grain boundary effect dominates the grain size effect in fine-grain ceramics,and expands current knowledge on DGG and grain size effect in polycrystalline materials.展开更多
The effect of aging treatment on the superelasticity and martensitic transformation critical stress in columnar-grained Cu_（71）Al_（18）Mn_（11） shape memory alloy（SMA） at the temperature ranging from 250°C ...The effect of aging treatment on the superelasticity and martensitic transformation critical stress in columnar-grained Cu_（71）Al_（18）Mn_（11） shape memory alloy（SMA） at the temperature ranging from 250°C to 400°C was investigated. The microstructure evolution during the aging treatment was characterized by optical microscopy, scanning electron microscopy, transmission electron microscopy, and X-ray diffraction. The results show that the plate-like bainite precipitates distribute homogeneously within austenitic grains and at grain boundaries. The volume fraction of bainite increases with the increase in aging temperature and aging time, which substantially improves the martensitic transformation critical stress of the alloy, whereas the bainite only slightly affects the superelasticity. This behavior is attributed to a coherent relationship between the bainite and the austenite, as well as to the bainite and the martensite exhibiting the same crystal structure. The variations of the martensitic transformation critical stress and the superelasticity of columnar-grained Cu_（71）Al_（18）Mn_（11） SMA with aging-temperature and aging time are described by the Austin-Rickett equation, where the activation energy of bainite precipitation is 77.2 kJ ·mol1. Finally, a columnar-grained Cu_（71）Al_（18）Mn_（11） SMA with both excellent superelasticity（5%-9%） and high martensitic transformation critical stress（443-677 MPa） is obtained through the application of the appropriate aging treatments.展开更多
The grain size of Mg foams was innovatively refined without alteration of pore structure and relative density by subjecting multi-axial forging(MAF)process to Ti-Mg composite,an intermediary product of the fabrication...The grain size of Mg foams was innovatively refined without alteration of pore structure and relative density by subjecting multi-axial forging(MAF)process to Ti-Mg composite,an intermediary product of the fabrication process of Mg foams where the spherical Ti particles were utilized as the replication material.The feasibility of the MAF process and the grain size effect on the mechanical properties of Mg foams were discussed.The results showed that,with the appropriate strain of 0.24 applied in the MAF process,Ti-Mg composites returned to original physical appearance without generating microcracks.And complete recrystallization was achieved after heat treatment,with the grain size of the MAFprocessed Mg foams two to three orders of magnitude smaller than that of as-cast foam.The mechanical properties of Mg foams were enhanced extensively after grain refinement with the yield strength and the plastic collapse strength increased by 147%and 50.7%,respectively.A revised model integrated by the Hall-Petch law and Gibson-Ashby model was proposed,which gave a good estimation of the yield strength and the plastic collapse strength of Mg foams from the compressive behavior of the corresponding parent material,though a knockdown factor of 0.45 was introduced for the yield strength.展开更多
This study focused on the effect of grain size(GS)on dynamic damage performance of nano-crystalline nickel titanium(NC NiTi)alloy.Molecular dynamics simulations were conducted to triaxially expand it at a high strain ...This study focused on the effect of grain size(GS)on dynamic damage performance of nano-crystalline nickel titanium(NC NiTi)alloy.Molecular dynamics simulations were conducted to triaxially expand it at a high strain rate(4×10~9 s^(-1)),while the temperature and initial pressure remained 300 K and 0 bar,respectively.It was discovered that the superelastic NiTi alloy exhibited the similar damage response as ductile metallic materials,which was vividly characterized by void nucleation,growth,and coalescence.The stress-strain curves demonstrated that the void nucleations always occurred near the start of the strain softening region at various grain sizes.Interestingly,it was discovered that the void evolution was characteristic of an almost double-linear behavior,and the piecewise linearity became more prominent for the void volume fraction increase at larger grain size.More importantly,the fracture behavior was found to be strongly dependent upon the grain size in the NC NiTi alloy.For small grain size,the existing voids propagated along the grain boundaries and in the grains,leading to intergranular and transgranular fracture.Contrarily,the intergranular-dominated fracture was responsible for the void propagation in the large grain.In addition,the starting time,ending time,and threshold of void nucleation were found to be weak sensitivity to GS,and a reverse effect was appropriate to the void growth.The results highlighted that as the GS increased,more complete stress relaxation and shorter duration time were produced,leading to larger void volume fraction and faster growth rate.展开更多
First-principles calculations based on the density functional theory（DFT） and ultra-soft pseudopotential are employed to study the atomic configuration and charge density of impurity P in Ni Al Σ5 grain boundary（G...First-principles calculations based on the density functional theory（DFT） and ultra-soft pseudopotential are employed to study the atomic configuration and charge density of impurity P in Ni Al Σ5 grain boundary（GB）. The negative segregation energy of a P atom proves that a P atom can easily segregate in the Ni Al GB. The atomic configuration and formation energy of the P atom in the Ni Al GB demonstrate that the P atom tends to occupy an interstitial site or substitute a Al atom depending on the Ni/Al atoms ratio. The P atom is preferable to staying in the Ni-rich environment in the Ni Al GB forming P–Ni bonds. Both of the charge density and the deformation charge imply that a P atom is more likely to bond with Ni atoms rather than with Al atoms. The density of states further exhibits the interactions between P atom and Ni atom, and the orbital electrons of P, Ni and Al atoms all contribute to P–Ni bonds in the Ni Al GB. It is worth noting that the P–Ni covalent bonds might embrittle the Ni Al GB and weakens the plasticity of the Ni Al intermetallics.展开更多
The macroscopic mechanical properties of rocks are significantly influenced by their microstructure.As a material bonded by mineral grains,the grain morphology of crystalline rock is the primary factor influencing the...The macroscopic mechanical properties of rocks are significantly influenced by their microstructure.As a material bonded by mineral grains,the grain morphology of crystalline rock is the primary factor influencing the strength.However,most strength criteria neglect the strength variations caused by different grain characteristics in rocks.Furthermore,the traditional linear criteria tend to overestimate tensile strength and exhibit apex singularity.To address these shortcomings,a piecewise strength criterion that considers the grain size effect has been proposed.A part of an ellipse was employed to construct the envelope of the tensive-shear region on the meridian plane,to accurately reproduce the low tensile-compressive strength ratio.Based on the analysis of experimental data,both linear and exponential modification functions that account for grain size effects were integrated into the proposed criterion.The corresponding finite element algorithm has been implemented.The accuracy and applicability of the proposed criterion were validated by comparing with the experimental data.展开更多
To provide insight into the effect of grain size on the precipitation behavior ofγstrengthening super-alloy Inconel 718,a gradient nanostructure with a large grain size span(from 9 nm to tens of microns)along the dep...To provide insight into the effect of grain size on the precipitation behavior ofγstrengthening super-alloy Inconel 718,a gradient nanostructure with a large grain size span(from 9 nm to tens of microns)along the depth direction was achieved by mean of surface mechanical grinding treatment,followed by annealing upon 700-1000℃ for 1 h.The results reveal significant differences in the type and size of precipitates in samples with different grain sizes.Noγprecipitate was detected inside the grains as the grain size was refined down to 40 nm(NG-40)and 9 nm(NG-9).Forδphase,a significantly accelerated precipitation along grain boundary was observed in NG-40 upon 700℃ annealing.Interestingly,with the grain size drops to 9 nm,the precipitation ofδwas suppressed,with some nanosized MC carbides appearing upon annealing.The grain size effect of precipitation behavior endows NG-9 an ultra-high RT-hardness(5.2 GPa)after 1000℃ thermal exposure and an ultra-high hot-hardness(3.2 GPa)at 800℃.展开更多
We studied the characteristics of dry matterproduction and matter partitioning in hybridrice and the relationships of them with heterot-ic effect in 1993. Two popular indica hybrids, Shanyou 63(Zhenshan 97A/Minhui 63 ...We studied the characteristics of dry matterproduction and matter partitioning in hybridrice and the relationships of them with heterot-ic effect in 1993. Two popular indica hybrids, Shanyou 63(Zhenshan 97A/Minhui 63 ) and Teyou 63(Longtepu A/Minhui 63), as well as theircommon restorer line, Minhui 63 (elite cultivar展开更多
Phytate of three concentrations was sprayed on the leaves of an indica rice Yuanfengzao in heading stage, full heading stage, filling stage and wax ripeness stage respectively. The effects of phytate on the enzyme act...Phytate of three concentrations was sprayed on the leaves of an indica rice Yuanfengzao in heading stage, full heading stage, filling stage and wax ripeness stage respectively. The effects of phytate on the enzyme activity in endosperm and rice grain quality were determinated. Plants sprayed with distilled water were used as control. It was showed that spraying solutions in full heading stage had the most manifest effect. The activity of amylosynthetase between the 100mg/kg and 150mg/kg phytate treatment was identical, which was 7.4% higher than that of 50mg/kg treatment. On the other hand, amylase activity on the 50mg/kg treatment was 12.5% and 8.7% lower than those展开更多
The relation between microstructure characteristics and mechanical properties of X80 pipeline steels was investigated using optical microscopy, scanning electron microscopy, etc. It is shown that the structure consist...The relation between microstructure characteristics and mechanical properties of X80 pipeline steels was investigated using optical microscopy, scanning electron microscopy, etc. It is shown that the structure consists of polygonal ferrite （PF）, quasi-polygonal ferrite （QPF）, acicular ferrite （AF）, and granular bainitic ferrite （GF）. With increasing volume fraction of M-A islands （below 3%）, the yield strength increases. With increasing content of higher angle grain boundaries（HAGBs）, the yield strength, elongation, and DWTT properties at -15 ℃ increase, and the volume fraction of M-A islands reaches its highest point in the steel containing the most volume fraction of GF.展开更多
Microstructural characteristics of different sub-regions of heat affected zone （HAZ） of low welding crack susceptibility steel weldment were investigated by using optical microscopy and scanning electron microscopy ...Microstructural characteristics of different sub-regions of heat affected zone （HAZ） of low welding crack susceptibility steel weldment were investigated by using optical microscopy and scanning electron microscopy equipped with electron backscattered diffraction system. And the focus was put on the correlation between microstructural characteristics and HAZ toughness of the weldment. The results reveal that the toughness of fusion line zone （FLZ） specimens is much lower than that of fine grained HAZ （FGHAZ） specimens. The coarse inclusions in the weld metal and the large martensite-austenite constituents in the coarse grained HAZ （CGHAZ） have an obvious negative effect on the crack initiation energy of FLZ. Meanwhile, the coarse granular bainite with large effective grain decreases the crack propagation energy seriously. By contrast, fine crystallographic grains in the FGHAZ play a key role in increasing toughness, especially in improving crack propagation energy.展开更多
Biogenic elements and six phosphorus （P） fractions in surface sediments from the Changjiang Estuary and adjacent waters were determined to investigate the governing factors of these elements, and further to discuss ...Biogenic elements and six phosphorus （P） fractions in surface sediments from the Changjiang Estuary and adjacent waters were determined to investigate the governing factors of these elements, and further to discuss their potential uses as paleo-environment proxies and risks of P release from sediment. Total organic carbon （TOC） and leachable organic P （Lea-OP） showed high concentrations in the estuary, Zhejiang coast and offshore upwelling area. They came from both the Changjiang River and marine biological input. Biogenic silicon （BSi） exhibited a high concentration band between 123 and 124°E. BSi mainly came from diatom production and its concentration in the inshore area was diluted by river sediment. Total nitrogen （TN） was primarily of marine biogenic origin. Seaward decreasing trends of Fe-bound P and Al-bound P revealed their terrestrial origins. Influenced by old Huanghe sediment delivered by the Jiangsu coastal current, the maximum concentration of detrital P （Det-P） was observed in the area north of the estuary. Similar high concentrations of carbonate fluorapatite （CFA-P） and CaCO3in the southern study area suggested marine calcium-organism sources of CFA-P. TOC, TN and non-apatite P were enriched in fine sediment, and Det-P partially exhibited coarse-grain enrichment, but BSi had no correlation with sediment grain size. Different sources and governing factors made biogenic elements and P species have distinct potential uses in indicating environmental conditions. Transferable P accounted for 14%-46% of total P. In an aerobic environment, there was low risk of P release from sediment, attributed to excess Fe oxides in sediments.展开更多
基金Funded by China Postdoctoral Science Foundation(No.20060390319)
文摘X65, X70, and X80 belong to high grade pipeline steels. Toughness is one of the most important properties of pipeline steels when the pipeline transports the gas or oil, and the means to control toughness is very important for exploring even higher grade pipeline steels. We established the relationship between toughness and crystallographic parameters of high grade pipeline steels by studying the crystallographic parameters of X65, X70, and X80 using EBSD and analyzing Charpy CVN of X65, X70 and X80. The results show that the effective grain size, the frequency distribution of grain boundary misorientation and the ratio of high angle grain boundary to small angle grain boundary are important parameters. The finer the effective grain size, and the higher the frequency distribution of grain boundaries （〉 50~）, the more excellent toughness of high grade pipeline steels will be.
基金financially supported by the Liaoning Revitalization Talents Program(No.XLYC1907143)the Strategic Priority Research Program of the Chinese Academy of Sciences(Nos.XDC04000000 and XDA28040200)。
文摘The effect of cooling rate on microstructure and effective grain size(EGS)of a Ni-Cr-Mo-B high-strength steel has been studied by dilatometer,field emission scanning electron microscopy(FESEM),transmission electron microscopy(TEM)and electron backscattered diffraction(EBSD).The results show that the microstructure of the Ni-Cr-Mo-B steel is dependent on cooling rate in the following sequence:lath martensite(LM),mixed LM and lath bainite(LB),mixed LB and granular bainite(GB)and GB.The critical cooling rates for appearance of LB and GB are about 10℃/s and 0.5℃/s,respectively.The LM(>10℃/s)consists of few blocky regions with a width of several micros.Compared with the lath regions,the blocky regions in LM form at higher actual transformation temperatures during cooling.The blocky region area percentage in LM keeps almost constant about 8%at different cooling rates(>10℃/s)due to similar martensite transformation starting temperature(M_(s)).The LB percentage in mixed LM/LB increases gradually with decreasing cooling rate(10-0.5℃/s).The EBSD results show that different microstructures have different EGS.The mixed LM/LB exhibits the smallest EGS due to the separation of the prior austenite grains by the pre-formed LB and the refinement of the LM.Meanwhile,the mixed LM/LB at different cooling rates(10-0.5℃/s)exhibits almost the same EGS because the LB and LM in the mixed LM/LB have a similar high-angle grain boundary density and similar EGS.Because the blocky regions contain few high-angle grain boundaries and have similar area percentages in the LM,the LM at different cooling rates(>10℃/s)exhibits almost the same EGS.The ferrite in GB exhibits as a whole with few high-angle grain boundaries;thus,the mixed LB/GB exhibits the largest EGS.
基金financial support from the National Key Research and Development Program of China(No.2021YFB3702101)National Natural Science Foundation of China(No.52130107,52071038)+5 种基金Fundamental Research Funds for the Central Universities(No.2023CDJXY-018)the“111”Project(No.B16007)by the Ministry of Education and the State Administration of Foreign Experts Affairs of Chinasupport to the Norwegian Micro-and Nano-Fabrication Facility,NorFab(No.295864)the Norwegian Laboratory for Mineral and Materials Characterization,MiMaC(No.269842/F50)the RCN INRPART project IntMat(No.309724)the Center for Research based Innovation SFI PhysMet(No.309584).
文摘Mg-3Gd(wt.%)samples with different initial grain sizes were prepared to evaluate the grain size effect on microstructural evolution during cold rolling and subsequent annealing hardening response.The deformation behavior and mechanical response of the as-rolled and annealed samples were systematically investigated by a combination of electron microscopy and microhardness characterization.The results show that the twinning activities were highly suppressed in the fine-grained samples during rolling.Upon increasing the rolling reduction to 40%,ultra-fine grain structures with a volume fraction of∼28%were formed due to the activation of multiple slip systems.Conversely,twinning dominated the early stages of deformation in the coarse-grained samples.After a 10%rolling reduction,numerous twins with a volume fraction of∼23%were formed.Further increasing the rolling reduction to 40%,high-density dislocations were activated and twin structures with a volume fraction of∼36%were formed.The annealing hardening response of deformed samples was effectively enhanced compared to that of the non-deformed samples,which was attributed to the enhanced Gd segregation along grain boundaries,twin boundaries and dislocation cores.Moreover,the grain size and rolling reduction were found to affect the microstructure evolution during annealing,resulting in a notable difference in the annealing hardening response of Mg-3Gd alloy between samples of different grain sizes deformed to different strains.These findings highlight the crucial importance of microstructural and processing parameters in the design of high-strength,cost-effective Mg alloys.
基金financial support provided by the National Natural Science Foundation of China(Nos.51674077 and 51474063)
文摘Addition of Al-5Ti-1B alloy to molten aluminum alloys can refine α-Al grains effectively and thereby improve their strength and toughness. TiAl;and TiB;in Al-5Ti-1B alloy are the main secondary-phase particles for refinement, while the understanding on the effect of their sizes on α-Al grain refinement continues to be fragmented. Therefore, Al-5Ti-1B alloys with various sizes and morphologies of the secondary-phase particles were prepared by equal channel angular pressing（ECAP）. Evolution of the secondary-phase particles during ECAP process and their impact on α-Al grain refinement were studied by X-ray diffraction and scanning electron microscope（SEM）. Results show that during the ECAP process, micro-cracks firstly appeared inside TiAl;particles and then gradually expanded, which resulted in continuous refinement of TiAl;particles. In addition, micro-distribution uniformity of TiB;particles was improved due to the impingement of TiAl;particles to TiB;clusters during deformation. Excessively large sizes of TiAl;particles would reduce the number of effective heterogeneous nucleus and thus resulted in poor grain refinement effectiveness. Moreover, excessively small TiAl;particles would reduce inhibitory factors for grain growth Q and weaken grain refinement effectiveness. Therefore, an optimal size range of 18-22 μm for TiAl;particles was suggested.
基金the National Natural Science Foundation of China(Nos.51975031,52075023,51635005)Defense Industrial Technology Development Program,China(No.JCKY2018601C207)。
文摘In order to clarify the influence of grain size on cyclic deformation response of superalloy sheets and springback behavior,cyclic loading-unloading and shearing tests were performed on the superalloy foils with 0.2 mm in thickness and diverse grain sizes.The results show that,the decline ratio of elastic modulus is weakened with increasing grain size,and the Bauschinger effect becomes evident with decreasing grain size.Meanwhile,U-bending test results determine that the springback is diminished with increasing grain size.The Chaboche,Anisotropic Nonlinear Kinematic(ANK)and Yoshida-Uemori(Y-U)models were utilized to fit the shear stress-strain curves of specimens.It is found that Y-U model is sufficient of predicting the springback.However,the prediction accuracy is degraded with increasing grain size.
基金co-supported by the National Natural Science Foundation of China(No.52105316)the National Natural Foundation of Jiangxi,China(No.2021BAB214046)+1 种基金the Fundamental Research Funds for the Central Universities,China(No.501LKQB2022107021)Young Elite Scientists Sponsorship Program by the China Association for Science and Technology(No.YESS20200397)。
文摘The systematic investigation of the mechanical properties and microstructure evolution process of ultra-thin-walled Inconel 718 capillary brazing joints is of great significance because of the exceptionally high demands on its application.To achieve this objective,this study investigates the impact of three distinct brazing temperatures and five typical grain sizes on the brazed joints’mechanical properties and microstructure evolution process.Microstructural evolution analysis was conducted based on Electron Back Scatter Diffraction(EBSD),Scanning Electron Microscopy(SEM),X-Ray Diffraction(XRD),High-Resolution Transmission Electron Microscopy(HRTEM),and Focused Ion Beam(FIB).Besides,the mechanical properties and fracture behavior were studied based on the uniaxial tension tests and in-situ tension tests.The findings reveal that the brazing joint’s strength is higher for the fine-grain capillary than the coarse-grain one,primarily due to the formation of a dense branch structure composed of G-phase in the brazing seam.The effects of grain size,such as pinning and splitting,are amplified at higher brazing temperatures.Additionally,micro-cracks initiate around brittle intermetallic compounds and propagate through the eutectic zone,leading to a cleavage fracture mode.The fracture stress of fine-grain specimens is higher than that of coarse-grain due to the complex micro-crack path.Therefore,this study contributes significantly to the literature by highlighting the crucial impact of grain size on the brazing properties of ultra-thin-walled Inconel 718 structures.
基金Project supported by the Natural Science Foundation of Chongqing(CSTB2022NSCQ-MSX0252)Research and Innovation Team Cultivation Project of Chongqing University of Technology(2023TDZ010)。
文摘In the present study,room-temperature compression experiments and characterization experiments via optical microstructure(OM),X-ray diffractometer(XRD)and electron backscattered diffraction(EBSD)techniques were conducted on WE43 magnesium(Mg)alloy samples to investigate the grain size effect on twinning behavior.Three couples of solution treatments(823 K for 0.5 h,798 K for 8 h,823 K for 16 h,followed by water-quenching at~333 K)were adopted and these solutionized samples are with different grain sizes of 48.5,72.0 and 120.2μm,respectively.Results show that{10-12}extension twin(ET)and{11-21}ET serve as major twinning modes during plastic deformation.For all 7.7%-deformed samples,although the volume fractions of{10-12}ETs and{11-21}ETs increase with the increasing grain size.{10-12}ETs are in growth stage,while{11-21}ETs are mainly in nucleation stage and they still maintain narrow and parallel to each other.Besides,{10-12}ETs mainly contribute to the rotation of caxes of grains towards compression direction,while{11-21}ETs mainly contribute to the formation of a nearly ring-shaped texture component in(0002)pole figure.Twin variants analysis with the assistance of Schmid factor(SF)demonstrates that the activation of twin variants mainly obeys Schmid law.When only{10-12}ETs occur in individual grains,the maximum number of twin variants shows some positive relationship with the increasing grain size.By comparison,when both{10-12}ETs and{11-21}ETs occur in individual grains,the maximum numbers of twin variants are rarely influenced by the increasing grain size.
基金financially supported by the National Natu-ral Science Foundation of China(Nos.12104093,52072075,and 52102126)the Natural Science Foundation of Fujian Province(Nos.2021J05122,2021J05123,2022J01087,and 2022J01552)+2 种基金the Sichuan Province Science and Technology Support Program(No.2021YJ0560,22ZDYF3306,2022NSFSC1970,and 2022YFG0099)the Qishan Scholar Financial Support from Fuzhou University(No.GXRC-20099)the Fundamental Research Funds for the Central Universities,Southwest Minzu University(No.2020NTD03).
文摘Barium titanate[BaTiO_(3)(BT)]-based ceramics are typical ferroelectric materials.Here,the discontinuous grain growth(DGG)and relevant grain size effect are deeply studied.An obvious DGG phenomenon is observed in a paradigmatic Zr^(4+)-doped BT-based ceramic,with grains growing from∼2.2–6.6 to∼121.8–198.4μm discontinuously near 1320℃.It is found that fine grains can get together and grow into large ones with liquid phase surrounding them above eutectic temperature.Then the grain boundary density(D g)is quantitatively studied and shows a first-order reciprocal relationship with grain size,and the grain size effect is dependent on D g.Fine grains lead to high D g,and then cause fine domains and pseudocubic-like phase structure because of the interrupted long-range ferroelectric orders by grain boundary.High D g also causes the diffusion phase transition and low Curie dielectric peak due to the distribution of phase transition temperature induced by internal stress.Local domain switching experiments reveal that the polarization orientation is more difficult near the grain boundary,implying that the grain boundary inhibition dominates the process of polarization orientation in fine-grain ceramics,which leads to low polarization but a high coercive field.However,large-grain ceramics exhibit easy domain switching and high&similar ferroelectricity.This work reveals that the grain boundary effect dominates the grain size effect in fine-grain ceramics,and expands current knowledge on DGG and grain size effect in polycrystalline materials.
基金financially supported by the National Natural Science Foundation of China (Nos. 51574027 and 51604206)the Financial Support from the State Key Laboratory for Advanced Metals and Materials (No. 2016Z-22)
文摘The effect of aging treatment on the superelasticity and martensitic transformation critical stress in columnar-grained Cu_（71）Al_（18）Mn_（11） shape memory alloy（SMA） at the temperature ranging from 250°C to 400°C was investigated. The microstructure evolution during the aging treatment was characterized by optical microscopy, scanning electron microscopy, transmission electron microscopy, and X-ray diffraction. The results show that the plate-like bainite precipitates distribute homogeneously within austenitic grains and at grain boundaries. The volume fraction of bainite increases with the increase in aging temperature and aging time, which substantially improves the martensitic transformation critical stress of the alloy, whereas the bainite only slightly affects the superelasticity. This behavior is attributed to a coherent relationship between the bainite and the austenite, as well as to the bainite and the martensite exhibiting the same crystal structure. The variations of the martensitic transformation critical stress and the superelasticity of columnar-grained Cu_（71）Al_（18）Mn_（11） SMA with aging-temperature and aging time are described by the Austin-Rickett equation, where the activation energy of bainite precipitation is 77.2 kJ ·mol1. Finally, a columnar-grained Cu_（71）Al_（18）Mn_（11） SMA with both excellent superelasticity（5%-9%） and high martensitic transformation critical stress（443-677 MPa） is obtained through the application of the appropriate aging treatments.
基金supported financially by the National Key Research and Development Program of China(No.2016YFC1102103)the Shanghai Municipal Commission of Economy and Informatization(No.JJ-YJCX-01-19-1277)+1 种基金the Science and Technology Commission of Shanghai Municipality(Nos.19441906300,19441913400,18441908000 and 17440730700)the Shanghai Rising-Star Program(No.19QB1400400)。
文摘The grain size of Mg foams was innovatively refined without alteration of pore structure and relative density by subjecting multi-axial forging(MAF)process to Ti-Mg composite,an intermediary product of the fabrication process of Mg foams where the spherical Ti particles were utilized as the replication material.The feasibility of the MAF process and the grain size effect on the mechanical properties of Mg foams were discussed.The results showed that,with the appropriate strain of 0.24 applied in the MAF process,Ti-Mg composites returned to original physical appearance without generating microcracks.And complete recrystallization was achieved after heat treatment,with the grain size of the MAFprocessed Mg foams two to three orders of magnitude smaller than that of as-cast foam.The mechanical properties of Mg foams were enhanced extensively after grain refinement with the yield strength and the plastic collapse strength increased by 147%and 50.7%,respectively.A revised model integrated by the Hall-Petch law and Gibson-Ashby model was proposed,which gave a good estimation of the yield strength and the plastic collapse strength of Mg foams from the compressive behavior of the corresponding parent material,though a knockdown factor of 0.45 was introduced for the yield strength.
基金the financial support of the Natural Science Foundation Project of CQ CSTC under grant number cstc2018jcyjAX0581the Fundamental Research Funds for the Central Universities under grant number XDJK2018B002+1 种基金the foundation of the National Key Defense Laboratory for Computational Physics under grant number HXo2020-74the Venture&Innovation Support Program for Chongqing Overseas Returnees under grant number cx2018078。
文摘This study focused on the effect of grain size(GS)on dynamic damage performance of nano-crystalline nickel titanium(NC NiTi)alloy.Molecular dynamics simulations were conducted to triaxially expand it at a high strain rate(4×10~9 s^(-1)),while the temperature and initial pressure remained 300 K and 0 bar,respectively.It was discovered that the superelastic NiTi alloy exhibited the similar damage response as ductile metallic materials,which was vividly characterized by void nucleation,growth,and coalescence.The stress-strain curves demonstrated that the void nucleations always occurred near the start of the strain softening region at various grain sizes.Interestingly,it was discovered that the void evolution was characteristic of an almost double-linear behavior,and the piecewise linearity became more prominent for the void volume fraction increase at larger grain size.More importantly,the fracture behavior was found to be strongly dependent upon the grain size in the NC NiTi alloy.For small grain size,the existing voids propagated along the grain boundaries and in the grains,leading to intergranular and transgranular fracture.Contrarily,the intergranular-dominated fracture was responsible for the void propagation in the large grain.In addition,the starting time,ending time,and threshold of void nucleation were found to be weak sensitivity to GS,and a reverse effect was appropriate to the void growth.The results highlighted that as the GS increased,more complete stress relaxation and shorter duration time were produced,leading to larger void volume fraction and faster growth rate.
基金Project supported by the National Natural Science Foundation of China(Grant No.51201181)the Scientific Research Fund of Civil Aviation University of China(Grant No.08QD14X)
文摘First-principles calculations based on the density functional theory（DFT） and ultra-soft pseudopotential are employed to study the atomic configuration and charge density of impurity P in Ni Al Σ5 grain boundary（GB）. The negative segregation energy of a P atom proves that a P atom can easily segregate in the Ni Al GB. The atomic configuration and formation energy of the P atom in the Ni Al GB demonstrate that the P atom tends to occupy an interstitial site or substitute a Al atom depending on the Ni/Al atoms ratio. The P atom is preferable to staying in the Ni-rich environment in the Ni Al GB forming P–Ni bonds. Both of the charge density and the deformation charge imply that a P atom is more likely to bond with Ni atoms rather than with Al atoms. The density of states further exhibits the interactions between P atom and Ni atom, and the orbital electrons of P, Ni and Al atoms all contribute to P–Ni bonds in the Ni Al GB. It is worth noting that the P–Ni covalent bonds might embrittle the Ni Al GB and weakens the plasticity of the Ni Al intermetallics.
基金Project(2023YFC2907403)supported by the National Key R&D Program of ChinaProject(52074021)supported by the National Natural Science Foundation of China+1 种基金Project(2242045)supported by Beijing Natural Science Foundation,ChinaProject(ZD202216)supported by the Beijing Association of Higher Education,China。
文摘The macroscopic mechanical properties of rocks are significantly influenced by their microstructure.As a material bonded by mineral grains,the grain morphology of crystalline rock is the primary factor influencing the strength.However,most strength criteria neglect the strength variations caused by different grain characteristics in rocks.Furthermore,the traditional linear criteria tend to overestimate tensile strength and exhibit apex singularity.To address these shortcomings,a piecewise strength criterion that considers the grain size effect has been proposed.A part of an ellipse was employed to construct the envelope of the tensive-shear region on the meridian plane,to accurately reproduce the low tensile-compressive strength ratio.Based on the analysis of experimental data,both linear and exponential modification functions that account for grain size effects were integrated into the proposed criterion.The corresponding finite element algorithm has been implemented.The accuracy and applicability of the proposed criterion were validated by comparing with the experimental data.
基金supported by the Strategic Pri-ority Research Program of the Chinese Academy of Sciences(No.XDB0510400)the National Natural Science Foundation of China(No.52225102)the Youth Innovation Promotion Association CAS(No.2023201).
文摘To provide insight into the effect of grain size on the precipitation behavior ofγstrengthening super-alloy Inconel 718,a gradient nanostructure with a large grain size span(from 9 nm to tens of microns)along the depth direction was achieved by mean of surface mechanical grinding treatment,followed by annealing upon 700-1000℃ for 1 h.The results reveal significant differences in the type and size of precipitates in samples with different grain sizes.Noγprecipitate was detected inside the grains as the grain size was refined down to 40 nm(NG-40)and 9 nm(NG-9).Forδphase,a significantly accelerated precipitation along grain boundary was observed in NG-40 upon 700℃ annealing.Interestingly,with the grain size drops to 9 nm,the precipitation ofδwas suppressed,with some nanosized MC carbides appearing upon annealing.The grain size effect of precipitation behavior endows NG-9 an ultra-high RT-hardness(5.2 GPa)after 1000℃ thermal exposure and an ultra-high hot-hardness(3.2 GPa)at 800℃.
文摘We studied the characteristics of dry matterproduction and matter partitioning in hybridrice and the relationships of them with heterot-ic effect in 1993. Two popular indica hybrids, Shanyou 63(Zhenshan 97A/Minhui 63 ) and Teyou 63(Longtepu A/Minhui 63), as well as theircommon restorer line, Minhui 63 (elite cultivar
文摘Phytate of three concentrations was sprayed on the leaves of an indica rice Yuanfengzao in heading stage, full heading stage, filling stage and wax ripeness stage respectively. The effects of phytate on the enzyme activity in endosperm and rice grain quality were determinated. Plants sprayed with distilled water were used as control. It was showed that spraying solutions in full heading stage had the most manifest effect. The activity of amylosynthetase between the 100mg/kg and 150mg/kg phytate treatment was identical, which was 7.4% higher than that of 50mg/kg treatment. On the other hand, amylase activity on the 50mg/kg treatment was 12.5% and 8.7% lower than those
基金Funded by the National Natural Science Foundation of China (No.50527402)
文摘The relation between microstructure characteristics and mechanical properties of X80 pipeline steels was investigated using optical microscopy, scanning electron microscopy, etc. It is shown that the structure consists of polygonal ferrite （PF）, quasi-polygonal ferrite （QPF）, acicular ferrite （AF）, and granular bainitic ferrite （GF）. With increasing volume fraction of M-A islands （below 3%）, the yield strength increases. With increasing content of higher angle grain boundaries（HAGBs）, the yield strength, elongation, and DWTT properties at -15 ℃ increase, and the volume fraction of M-A islands reaches its highest point in the steel containing the most volume fraction of GF.
基金supported by the National Natural Science Foundation of China (No. 51074052)the Fundamental Research Funds for the Central Universities(No. N100607001)
文摘Microstructural characteristics of different sub-regions of heat affected zone （HAZ） of low welding crack susceptibility steel weldment were investigated by using optical microscopy and scanning electron microscopy equipped with electron backscattered diffraction system. And the focus was put on the correlation between microstructural characteristics and HAZ toughness of the weldment. The results reveal that the toughness of fusion line zone （FLZ） specimens is much lower than that of fine grained HAZ （FGHAZ） specimens. The coarse inclusions in the weld metal and the large martensite-austenite constituents in the coarse grained HAZ （CGHAZ） have an obvious negative effect on the crack initiation energy of FLZ. Meanwhile, the coarse granular bainite with large effective grain decreases the crack propagation energy seriously. By contrast, fine crystallographic grains in the FGHAZ play a key role in increasing toughness, especially in improving crack propagation energy.
基金supported by the Natural Science Foundation of China for Creative Research Groups(No.41121064)the National Basic Research Program (973)of China(No.2011CB403602,2010CB951802)the National Natural Science Foundation of China(No.41306070)
文摘Biogenic elements and six phosphorus （P） fractions in surface sediments from the Changjiang Estuary and adjacent waters were determined to investigate the governing factors of these elements, and further to discuss their potential uses as paleo-environment proxies and risks of P release from sediment. Total organic carbon （TOC） and leachable organic P （Lea-OP） showed high concentrations in the estuary, Zhejiang coast and offshore upwelling area. They came from both the Changjiang River and marine biological input. Biogenic silicon （BSi） exhibited a high concentration band between 123 and 124°E. BSi mainly came from diatom production and its concentration in the inshore area was diluted by river sediment. Total nitrogen （TN） was primarily of marine biogenic origin. Seaward decreasing trends of Fe-bound P and Al-bound P revealed their terrestrial origins. Influenced by old Huanghe sediment delivered by the Jiangsu coastal current, the maximum concentration of detrital P （Det-P） was observed in the area north of the estuary. Similar high concentrations of carbonate fluorapatite （CFA-P） and CaCO3in the southern study area suggested marine calcium-organism sources of CFA-P. TOC, TN and non-apatite P were enriched in fine sediment, and Det-P partially exhibited coarse-grain enrichment, but BSi had no correlation with sediment grain size. Different sources and governing factors made biogenic elements and P species have distinct potential uses in indicating environmental conditions. Transferable P accounted for 14%-46% of total P. In an aerobic environment, there was low risk of P release from sediment, attributed to excess Fe oxides in sediments.
