The effects of initial spin orientation on the final electron beam polarization in laser wakefield acceleration in a pre-polarized plasma are investigated theoretically and numerically.From the results of variation of...The effects of initial spin orientation on the final electron beam polarization in laser wakefield acceleration in a pre-polarized plasma are investigated theoretically and numerically.From the results of variation of the initial spin direction,the spin dynamics of the electron beam are found to depend on the self-injection mechanism.The effects of wakefields and laser fields are studied using test particle dynamics and particle-in-cell simulations based on the Thomas-Bargmann-Michel-Telegdi equation.Compared with transverse injection,longitudinal injection is found to be preferable for obtaining a highly polarized electron beam.展开更多
To satisfy the validation requirements of flight control law for advanced aircraft,a wind tunnel based virtual flight testing has been implemented in a low speed wind tunnel.A 3-degree-offreedom gimbal,ventrally insta...To satisfy the validation requirements of flight control law for advanced aircraft,a wind tunnel based virtual flight testing has been implemented in a low speed wind tunnel.A 3-degree-offreedom gimbal,ventrally installed in the model,was used in conjunction with an actively controlled dynamically similar model of aircraft,which was equipped with the inertial measurement unit,attitude and heading reference system,embedded computer and servo-actuators.The model,which could be rotated around its center of gravity freely by the aerodynamic moments,together with the flow field,operator and real time control system made up the closed-loop testing circuit.The model is statically unstable in longitudinal direction,and it can fly stably in wind tunnel with the function of control augmentation of the flight control laws.The experimental results indicate that the model responds well to the operator＇s instructions.The response of the model in the tests shows reasonable agreement with the simulation results.The difference of response of angle of attack is less than 0.5°.The effect of stability augmentation and attitude control law was validated in the test,meanwhile the feasibility of virtual flight test technique treated as preliminary evaluation tool for advanced flight vehicle configuration research was also verified.展开更多
Anti-ram bollard systems, which are installed around buildings and infrastructure, can prevent unauthorized vehicles from entering, maintain distance from vehicle-borne improvised explosive devices （VBIED） and reduc...Anti-ram bollard systems, which are installed around buildings and infrastructure, can prevent unauthorized vehicles from entering, maintain distance from vehicle-borne improvised explosive devices （VBIED） and reduce the corresponding damage. Compared with a fixed bollard system, a removable bollard system provides more flexibility as it can be removed when needed. This paper first proposes a new type of K4-rated removable anti-ram bollard system. To simulate the collision of a vehicle hitting the bollard system, a finite element model was then built and verified through comparison of numerical simulation results and existing experimental results. Based on the orthogonal design method, the factors influencing the safety and economy of this proposed system were examined and sorted according to their importance. An optimal design scheme was then produced. Finally, to validate the effectiveness of the proposed design scheme, four dynamic impact tests, including two front impact tests and two side impact tests, have been conducted according to BSI Specifications. The residual rotation angles of the specimen are smaller than 30~ and satisfy the requirements of the BSI Specification.展开更多
Research to reliably predict the seismic response of nuclear power stations with a pile-raft foundation is needed to meet the high safety requirements of nuclear power stations.In this study,a scaled superstructure wi...Research to reliably predict the seismic response of nuclear power stations with a pile-raft foundation is needed to meet the high safety requirements of nuclear power stations.In this study,a scaled superstructure with a 4×3 pile-raft foundation,which is constructed in Shanxi kaolin clay,is modelled.Accordingly,the characteristics of seismic response for nuclear power stations with a pile-raft foundation are analyzed using dynamic centrifuge tests.In particular,multiple earthquake motions with different magnitudes and frequency properties are utilized to map the relationship between structural response and properties of earthquake motions.The results show that the seismic response of the soil,raft,and structure are significantly affected by the natural frequency and magnitude of the earthquake motion.The soil surface acceleration is lower than the raft acceleration.The results provide a reliable reference to better understand the seismic response of nuclear power stations.展开更多
Volatile organic compounds(VOCs) emitted from three types of carpets used in aircrafts were compared by using headspace and dynamic chamber tests. The headspace samples contained many compounds that were not detected ...Volatile organic compounds(VOCs) emitted from three types of carpets used in aircrafts were compared by using headspace and dynamic chamber tests. The headspace samples contained many compounds that were not detected in the dynamic chamber test; in addition, the dominant VOCs found by these two methods were different. The findings indicate that for highly sorptive materials such as carpets, headspace analysis may give inaccurate indication of actual VOC emissions, and it is necessary to conduct dynamic chamber tests over a certain period of time in order to identify the true emission characteristics. From the dynamic chamber tests, 2-ethyl-1-hexanol was the main VOC emitted from all three carpets. The study also examined the emission characteristics of aircraft carpets. In all experiments, total VOC(TVOC) concentration peaked within a few hours after the start of the experiment and was followed by rapid decay. The emission parameters of TVOC emitted by all three carpets were calculated and the simulated data matched the measured data well.展开更多
Dynamic compression experiments were conducted on red sandstone utilizing a split Hopkinson pressure bar(SHPB)to study the loading rate and high temperatures on their mechanically deformed properties and ultimate fail...Dynamic compression experiments were conducted on red sandstone utilizing a split Hopkinson pressure bar(SHPB)to study the loading rate and high temperatures on their mechanically deformed properties and ultimate failure modes,and to analyze the correlation between the strain rate,temperature,peak strength,and ultimate failure modes.The results show that the mass decreases with the increase of treatment temperature,and the pattern of the stress−strain curves is not impacted by the increase of impact velocity.Under a fixed temperature,the higher the impact velocity,the higher the strain rate and dynamical compression strength,indicating a strain rate hardening effect for red sandstone.With an increasing treatment temperature,the strain rate gradually increases when the impact loading remains unchanged,suggesting a rise in the deformability of red sandstone under high-temperature environment.Raise in both impact velocity and treatment temperature leads to an intensification of the damage features of the red sandstone.Similarly,higher strain rates lead to the intensification of the final damage mode of red sandstone regardless of the change in treatment temperature.Moreover,a dynamic damage constitutive model that considers the impacts of strain rate and temperature is proposed based on experimental results.展开更多
This work examines the impact of incorporating the physiological conditions of human cancellous bone,by integrating similar porosity of porous Fe with the cancellous bone under dynamic immersion test.All of the porous...This work examines the impact of incorporating the physiological conditions of human cancellous bone,by integrating similar porosity of porous Fe with the cancellous bone under dynamic immersion test.All of the porous Fe specimens with~80%porosity were immersed in Simulated Body Fluid(SBF)with a flow rate of 0.3 ml/min integrated with cancellous bone for 7,14 and 28 days.Porous Fe with the lowest surface area has the highest degradation rate despite having the lowest relative weight loss.The relationship between fluid induced shear stress and weight loss of specimens have been established.展开更多
The influence of FT(freeze-thaw)cycles and average strain rate on the dynamic impact performance,energy evolution characteristics,and failure behavior of sandstone was studied through dynamic impact tests.Results disp...The influence of FT(freeze-thaw)cycles and average strain rate on the dynamic impact performance,energy evolution characteristics,and failure behavior of sandstone was studied through dynamic impact tests.Results displayed that the FT damage process of samples can be divided into three stages based on the changes in weight,porosity,and P-wave velocity.The dynamic peak strength,dynamic elastic modulus,and strength ratio decreased with increasing FT cycles,and increased with increasing average strain rate.Moreover,the average strain rate reduced the influence of FT cycles on dynamic peak strength.In general,the incident energy,reflected energy and dissipated energy increased with increasing average strain rate,the transmitted energy was negligibly affected by the average strain rate,and the energy dissipation ratio decreased with increasing average strain rate.In addition,the influence of FT cycles on each type of energy and energy dissipation ratio during sample failure was smaller than that of average strain rate.The average size of fragments can accurately demonstrate the impact of FT damage and average strain rate on dynamic peak strength and failure mode,and quantitatively evaluate the sample’s fragmentation degree.Fractal dimension varies with FT cycles and average strain rate,and the threshold is between 148.30 and 242.57 s^(-1).If the average strain rate is in the threshold range,the relationship between the fractal dimension and dynamic peak strength is more regular,otherwise,it will become complicated.The results reveal the dynamic failure mechanism of white sandstone samples,providing assistance for dynamic rock-breaking and disaster prevention in cold regions.展开更多
Long-term cyclic train loading can cause settlement and deformation of the roadbed,affecting the normal operation of trains.In order to investigate the strain pattern of reinforced sandy soil under train loading,a ser...Long-term cyclic train loading can cause settlement and deformation of the roadbed,affecting the normal operation of trains.In order to investigate the strain pattern of reinforced sandy soil under train loading,a series of dynamic triaxial tests were carried out using multi-stage loading,focusing on the effects of the number of reinforcement layers,the confining pressure,and the mesh size of the geogrid on the accumulated plastic strain of reinforced sandy soil.Moreover,prediction models were proposed.The test results show that:1)The cumulative plastic strain versus vibration times of the specimens under different reinforcement layers exhibited three stages,namely,the rapid development stage,the rate transformation stage and the stability stage;2)The cumulative plastic strain decreases with increasing the number of reinforcement layers,but the magnitude of the effect of reinforcement on the cumulative plastic strain decreases with increasing the number of reinforcement layers,increasing the perimeter pressure and decreasing the mesh size of the geogrid have similar effects on the cumulative plastic strain pattern as increasing the number of reinforcement layers;3)Combined with the cumulative plastic strain law,a comprehensive model is proposed and the coefficient of determination is greater than 0.99.Furthermore,The cumulative plastic strain evolution law can be effectively predicted.The significance of parameters A,B and C is analyzed in detail.This study can provide theoretical references for further understanding of the deformation characteristics and settlement prediction of railway subgrades.展开更多
This study systematically investigated the coupling effects of confiningpressure and strain rate on the dynamic strength of granite through dynamic triaxial compression tests.A dynamic strength criterion was developed...This study systematically investigated the coupling effects of confiningpressure and strain rate on the dynamic strength of granite through dynamic triaxial compression tests.A dynamic strength criterion was developed to incorporate these coupling effects for further analysis.Moreover,the research thoroughly revealed the underlying mechanism by which these coupling effects influencethe rock strength.The results revealed that both confiningpressure and strain rate significantly enhanced the dynamic strength of rock;however,a mutual inhibition effect emerged under their coupling.Specifically,as the confiningpressure increased,the strengthening effect of strain rate gradually diminished.Conversely,increasing the strain rate weakened the strengthening effect of confiningpressure.The proposed strength criterion successfully predicted rock strength under various confiningpressures(0-225 MPa)and strain rates(10^(-6)-600 s^(-1)).It achieved an average prediction error of only 8.3%,which represents a 65%improvement in accuracy compared to models that consider confiningpressure and strain rate effects independently.At the micro-mechanism level,increasing confiningpressure and strain rate promoted crack propagation in a transgranular(TG)mode,thereby enhancing the overall rock strength.However,under the coupling effects,the interference and interaction of TG cracks weakened the overall strengthening effect.This indicated that the competitive interaction between confiningpressure and strain rate during crack propagation constitutes the intrinsic mechanism underlying their mutual inhibitory effect on rock strength.This study provides a more accurate theoretical basis for understanding the dynamic responses of rocks and contributes valuable insights for disaster prevention and control in deep rock engineering projects.展开更多
Method of testing for dynamic output forces from jet elements is studied, the handwidth is large in testing with this method. By establishing a model of the test system and simulating it, principles of how inherent fe...Method of testing for dynamic output forces from jet elements is studied, the handwidth is large in testing with this method. By establishing a model of the test system and simulating it, principles of how inherent features of the test system affect the dynamic force test are found out. Thus a theoretical foundation is given for the design and error modification to the actual test system.展开更多
[Objective]The aim was to research on construction of yield formation model of winter wheat.[Method]In the case of variety Shijiazhuang 8,the process of yield trait formation was studied by the dynamic ideal and unifo...[Objective]The aim was to research on construction of yield formation model of winter wheat.[Method]In the case of variety Shijiazhuang 8,the process of yield trait formation was studied by the dynamic ideal and uniform experimental design;the differences between plant dry weight and population indexes were analyzed by using multiple comparison analysis,and the yield formation model was developed by multiple regression analysis.[Result]The results showed that multiple correlation coefficients of yield formation model ranged from 0.91 to 0.97.[Conclusion]The model was significant which provide certain theoretical base for high yield and high efficiency cultivation of winter wheat.展开更多
The oil film thickness of the distribution pair of the bent-axis pump is tested dynamically in this paper. On the basis of synthetical consideration of the leakage flow rate, the loss of power and the ability to resis...The oil film thickness of the distribution pair of the bent-axis pump is tested dynamically in this paper. On the basis of synthetical consideration of the leakage flow rate, the loss of power and the ability to resist contaminant of the distribution pair,the parameters used to describe the distribution state are optimized. According to theoretical analyses and experimental research, the structure of the distribution plate is improved, and the ability to resist contaminant wear of the distribution pair is increased. Thus, it is possible to prolong the service life and working reliability of the pump.展开更多
A deformation prediction model for the dynamic creep test is deduced based on the linear viscoelastic（LVE）theory.Then,the defect of the LVE deformation prediction model is analyzed by comparing the prediction of the...A deformation prediction model for the dynamic creep test is deduced based on the linear viscoelastic（LVE）theory.Then,the defect of the LVE deformation prediction model is analyzed by comparing the prediction of the LVE deformation model with the experimental data.To improve accuracy,a modification of the LVE deformation prediction model is made to simulate the nonlinear property of the deformation of asphalt mixtures,and it is verified by comparing its simulation results with the experimental data.The comparison results show that the LVE deformation prediction model cannot simulate the nonlinear property of the permanent deformation of asphalt mixtures,while the modified deformation prediction model can provide more precise simulations of the whole process of the deformation and the permanent deformation in the dynamic creep test.Thus,the proposed modification greatly improves the accuracy of the LVE deformation prediction model.The modified model can provide a better understanding of the rutting behavior of asphalt pavement.展开更多
In deep underground engineering,rock burst and other dynamic disasters are prone to occur due to stress concentration and energy accumulation in surrounding rock.The control of dynamic disasters requires bolts and cab...In deep underground engineering,rock burst and other dynamic disasters are prone to occur due to stress concentration and energy accumulation in surrounding rock.The control of dynamic disasters requires bolts and cables with high strength,high elongation,and high energy-absorbing capacity.Therefore,a constant resistance energy-absorbing(CREA)material is developed.In this study,the dynamic characteristics of the new material are obtained via the drop hammer tests and the Split Hopkinson Pressure Bar(SHPB)tests of the new material and two common bolt(CB)materials widely used in the field.The test results of drop hammer test and SHPB test show that the percentage elongation of CREA material is more than 2.64 and 3.22 times those of the CB material,and the total impact energy acting on CREA material is more than 18.50 and 21.84 times,respectively,indicating that the new material has high elongation and high energy-absorbing capacity.Subsequently,the CREA bolts and cables using the new material are developed,which are applied in roadways with high stress and strong dynamic disturbance.The field monitoring results show that CREA bolts and cables can effectively control the surrounding rock deformation and ensure engineering safety.展开更多
Rock drilling machine,INSTRON testing system,and SHPB device are updated to investigate the characteristics of rocks at great depth,with high loads from overburden,tectonic stresses and dynamic impacts due to blasting...Rock drilling machine,INSTRON testing system,and SHPB device are updated to investigate the characteristics of rocks at great depth,with high loads from overburden,tectonic stresses and dynamic impacts due to blasting and boring.It is verified that these testing systems can be used to study the mechanical properties of rock material under coupled static and dynamic loading condition and give useful guidance for the deep mining and underground cavern excavation.Various tests to determine the rock strength,fragmentation behavior,and energy absorption were conducted using the updated testing systems.It is shown that under coupled static-dynamic loads,if the axial prestress is lower than its elastic limit,the rock strength is higher than the individual static or dynamic strength.At the same axial prestress,rock strength under coupled loads rises with the increasing strain rates.Under coupled static and dynamic loads,rock is observed to fail with tensile mode.While shear failure may exist if axial prestress is high enough.In addition,it is shown that the percentage of small particles increases with the increasing axial prestress and impact load based on the analysis of the particle-size distribution of fragments.It is also suggested that the energy absorption ratio of a specimen varies with coupled loads,and the maximum energy absorption ratio for a rock can be obtained with an appropriate combination of static and dynamic loads.展开更多
It is well-recognized that a transfer system response delay that reduces the test stability inevitably exists in real-time dynamic hybrid testing （RTDHT）. This paper focuses on the delay-dependent stability and adde...It is well-recognized that a transfer system response delay that reduces the test stability inevitably exists in real-time dynamic hybrid testing （RTDHT）. This paper focuses on the delay-dependent stability and added damping of SDOF systems in RTDHT. The exponential delay term is transferred into a rational fraction by the Pad6 approximation, and the delay-dependent stability conditions and instability mechanism of SDOF RTDHT systems are investigated by the root locus technique. First, the stability conditions are discussed separately for the cases of stiffness, mass, and damping experimental substructure. The use of root locus plots shows that the added damping effect and instability mechanism for mass are different from those for stiffness. For the stiffness experimental substructure case, the instability results from the inherent mode because of an obvious negative damping effect of the delay. For the mass case, the delay introduces an equivalent positive damping into the inherent mode, and instability occurs at an added high frequency mode. Then, the compound stability condition is investigated for a general case and the results show that the mass ratio may have both upper and lower limits to remain stable. Finally, a high-emulational virtual shaking table model is built to validate the stability conclusions.展开更多
Although the dynamic properties of subgrade soils in seasonally frozen areas have already been studied, few researchers have considered the influence of shallow groundwater during the freeze–thaw(F–T) cycles. So a m...Although the dynamic properties of subgrade soils in seasonally frozen areas have already been studied, few researchers have considered the influence of shallow groundwater during the freeze–thaw(F–T) cycles. So a multifunctional F–T cycle system was developed to imitate the groundwater recharge in the subgrade during the freezing process and a large number of dynamic triaxial experiments were conducted after the F–T cycles. Some significant factors including the F–T cycle number, compaction degree, confining pressure, cyclic deviator stress, loading frequency, and water content were investigated for the resilient modulus of soils. The experimental results indicated that the dynamic resilient modulus of the subgrade was negatively correlated with the cyclic deviator stress, F–T cycle number, and initial water content, whereas the degree of compaction, confining pressure, and loading frequency could enhance the resilient modulus. Furthermore, a modified model considering the F–T cycle number and stress state was established to predict the dynamic resilient modulus. The calculated results of this modified model were very close to the experimental results. Consequently, calculation of the resilient modulus for F–T cycles considering the dynamic load was appropriate. This study provides reference for research focusing on F–T cycles with groundwater supply and the dynamic resilient moduli of subgrade soils in seasonally frozen areas.展开更多
The changes in the physical characteristics of unconditioned and conditioned anaerobic digested sludge （ADS） biosolids, such as capillary suction time （CST）, yield stress, average size and fractal dimensions, were...The changes in the physical characteristics of unconditioned and conditioned anaerobic digested sludge （ADS） biosolids, such as capillary suction time （CST）, yield stress, average size and fractal dimensions, were investigated through a CST test, transient and dynamic rheological test and image analysis. The results showed that the optimum polymer dose range was observed when CST or its reciprocal value was employed as an indicator. There were good correlations between the yield stresses determined from both a controlled shear stress test and a strain amplitude sweep test. The yield stress and storage modulus （G＇） increased as the polymer dose increased in most cases. A frequency sweep test revealed that polymer conditioning could extend the frequency sweep ranges for their elastic behaviors over viscous behaviors as well as the gel-like structure in the linear viscoelastic range. These results implied that more deformation energy was stored in this rigid structure, and that elastic behavior became increasingly dominant with the addition of the polymer in most cases, In addition, both the average sizes and two-dimensional fractal dimensions for conditioned ADS biosolids presented a similar up-climax-down variation trend as the polymer doses increased, whereas the critical polymer doses at the highest average sizes or two-dimensional fractal dimensions, were different. Correlation analysis revealed that the conditioned ADS dewaterability was not correlated with the yield stresses, while the average sizes or the two-dimensional fractal dimensions for conditioned ADS biosolids could be taken as the indication parameters for ADS dewaterability.展开更多
A solution scheme is proposed in this paper for an existing RTDHT system to simulate large-scale finite element （FE） numerical substructures. The analysis of the FE numerical substructure is split into response anal...A solution scheme is proposed in this paper for an existing RTDHT system to simulate large-scale finite element （FE） numerical substructures. The analysis of the FE numerical substructure is split into response analysis and signal generation tasks, and executed in two different target computers in real-time. One target computer implements the response analysis task, wherein a large time-step is used to solve the FE substructure, and another target computer implements the signal generation task, wherein an interpolation program is used to generate control signals in a small time-step to meet the input demand of the controller. By using this strategy, the scale of the FE numerical substructure simulation may be increased significantly. The proposed scheme is initially verified by two FE numerical substructure models with 98 and 1240 degrees of freedom （DOFs）. Thereafter, RTDHTs of a single frame-foundation structure are implemented where the foundation, considered as the numerical substructure, is simulated by the FE model with 1240 DOFs. Good agreements between the results of the RTDHT and those from the FE analysis in ABAQUS are obtained.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.11804348,11775056,11975154,12225505,and 12405281)the Science Challenge(Project No.TZ2018005)+2 种基金supported by the Shanghai Pujiang Program(Grant No.23PJ1414600)the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB0890203)supported by the Accelerator Technology Helmholtz Infrastructure consortium ATHENA.
文摘The effects of initial spin orientation on the final electron beam polarization in laser wakefield acceleration in a pre-polarized plasma are investigated theoretically and numerically.From the results of variation of the initial spin direction,the spin dynamics of the electron beam are found to depend on the self-injection mechanism.The effects of wakefields and laser fields are studied using test particle dynamics and particle-in-cell simulations based on the Thomas-Bargmann-Michel-Telegdi equation.Compared with transverse injection,longitudinal injection is found to be preferable for obtaining a highly polarized electron beam.
基金supported by the National Key Basic Research Program of China(No.2015CB755800)
文摘To satisfy the validation requirements of flight control law for advanced aircraft,a wind tunnel based virtual flight testing has been implemented in a low speed wind tunnel.A 3-degree-offreedom gimbal,ventrally installed in the model,was used in conjunction with an actively controlled dynamically similar model of aircraft,which was equipped with the inertial measurement unit,attitude and heading reference system,embedded computer and servo-actuators.The model,which could be rotated around its center of gravity freely by the aerodynamic moments,together with the flow field,operator and real time control system made up the closed-loop testing circuit.The model is statically unstable in longitudinal direction,and it can fly stably in wind tunnel with the function of control augmentation of the flight control laws.The experimental results indicate that the model responds well to the operator＇s instructions.The response of the model in the tests shows reasonable agreement with the simulation results.The difference of response of angle of attack is less than 0.5°.The effect of stability augmentation and attitude control law was validated in the test,meanwhile the feasibility of virtual flight test technique treated as preliminary evaluation tool for advanced flight vehicle configuration research was also verified.
文摘Anti-ram bollard systems, which are installed around buildings and infrastructure, can prevent unauthorized vehicles from entering, maintain distance from vehicle-borne improvised explosive devices （VBIED） and reduce the corresponding damage. Compared with a fixed bollard system, a removable bollard system provides more flexibility as it can be removed when needed. This paper first proposes a new type of K4-rated removable anti-ram bollard system. To simulate the collision of a vehicle hitting the bollard system, a finite element model was then built and verified through comparison of numerical simulation results and existing experimental results. Based on the orthogonal design method, the factors influencing the safety and economy of this proposed system were examined and sorted according to their importance. An optimal design scheme was then produced. Finally, to validate the effectiveness of the proposed design scheme, four dynamic impact tests, including two front impact tests and two side impact tests, have been conducted according to BSI Specifications. The residual rotation angles of the specimen are smaller than 30~ and satisfy the requirements of the BSI Specification.
基金Supported by:Scientific Research Program of China General Nuclear Power Corporation(CGN)under Grant No.K-A2017.054Postgraduate Research and Practice Innovation Program of Jiangsu Province under Grant No.KYCX19_0093。
文摘Research to reliably predict the seismic response of nuclear power stations with a pile-raft foundation is needed to meet the high safety requirements of nuclear power stations.In this study,a scaled superstructure with a 4×3 pile-raft foundation,which is constructed in Shanxi kaolin clay,is modelled.Accordingly,the characteristics of seismic response for nuclear power stations with a pile-raft foundation are analyzed using dynamic centrifuge tests.In particular,multiple earthquake motions with different magnitudes and frequency properties are utilized to map the relationship between structural response and properties of earthquake motions.The results show that the seismic response of the soil,raft,and structure are significantly affected by the natural frequency and magnitude of the earthquake motion.The soil surface acceleration is lower than the raft acceleration.The results provide a reliable reference to better understand the seismic response of nuclear power stations.
基金Funded by the National Basic Research Program of China(973 Program) under Grant No.2012CB720100
文摘Volatile organic compounds(VOCs) emitted from three types of carpets used in aircrafts were compared by using headspace and dynamic chamber tests. The headspace samples contained many compounds that were not detected in the dynamic chamber test; in addition, the dominant VOCs found by these two methods were different. The findings indicate that for highly sorptive materials such as carpets, headspace analysis may give inaccurate indication of actual VOC emissions, and it is necessary to conduct dynamic chamber tests over a certain period of time in order to identify the true emission characteristics. From the dynamic chamber tests, 2-ethyl-1-hexanol was the main VOC emitted from all three carpets. The study also examined the emission characteristics of aircraft carpets. In all experiments, total VOC(TVOC) concentration peaked within a few hours after the start of the experiment and was followed by rapid decay. The emission parameters of TVOC emitted by all three carpets were calculated and the simulated data matched the measured data well.
基金Project(BZ2024023)supported by the Jiangsu Province International Collaboration Program-Key National Industrial Technology Research and Development Cooperation,China。
文摘Dynamic compression experiments were conducted on red sandstone utilizing a split Hopkinson pressure bar(SHPB)to study the loading rate and high temperatures on their mechanically deformed properties and ultimate failure modes,and to analyze the correlation between the strain rate,temperature,peak strength,and ultimate failure modes.The results show that the mass decreases with the increase of treatment temperature,and the pattern of the stress−strain curves is not impacted by the increase of impact velocity.Under a fixed temperature,the higher the impact velocity,the higher the strain rate and dynamical compression strength,indicating a strain rate hardening effect for red sandstone.With an increasing treatment temperature,the strain rate gradually increases when the impact loading remains unchanged,suggesting a rise in the deformability of red sandstone under high-temperature environment.Raise in both impact velocity and treatment temperature leads to an intensification of the damage features of the red sandstone.Similarly,higher strain rates lead to the intensification of the final damage mode of red sandstone regardless of the change in treatment temperature.Moreover,a dynamic damage constitutive model that considers the impacts of strain rate and temperature is proposed based on experimental results.
基金funded by the Ministry of Higher Education,Malaysia under the Fundamental Research Grant Scheme(FRGS/1/2018/TK03/UTM/02/8).
文摘This work examines the impact of incorporating the physiological conditions of human cancellous bone,by integrating similar porosity of porous Fe with the cancellous bone under dynamic immersion test.All of the porous Fe specimens with~80%porosity were immersed in Simulated Body Fluid(SBF)with a flow rate of 0.3 ml/min integrated with cancellous bone for 7,14 and 28 days.Porous Fe with the lowest surface area has the highest degradation rate despite having the lowest relative weight loss.The relationship between fluid induced shear stress and weight loss of specimens have been established.
基金Funded by the National Natural Science Foundation of China(Nos.52174088,42277154)the Independent Innovation Research Fund Graduate Free Exploration Project for the Wuhan University of Technology(No.104972024JYS0007)。
文摘The influence of FT(freeze-thaw)cycles and average strain rate on the dynamic impact performance,energy evolution characteristics,and failure behavior of sandstone was studied through dynamic impact tests.Results displayed that the FT damage process of samples can be divided into three stages based on the changes in weight,porosity,and P-wave velocity.The dynamic peak strength,dynamic elastic modulus,and strength ratio decreased with increasing FT cycles,and increased with increasing average strain rate.Moreover,the average strain rate reduced the influence of FT cycles on dynamic peak strength.In general,the incident energy,reflected energy and dissipated energy increased with increasing average strain rate,the transmitted energy was negligibly affected by the average strain rate,and the energy dissipation ratio decreased with increasing average strain rate.In addition,the influence of FT cycles on each type of energy and energy dissipation ratio during sample failure was smaller than that of average strain rate.The average size of fragments can accurately demonstrate the impact of FT damage and average strain rate on dynamic peak strength and failure mode,and quantitatively evaluate the sample’s fragmentation degree.Fractal dimension varies with FT cycles and average strain rate,and the threshold is between 148.30 and 242.57 s^(-1).If the average strain rate is in the threshold range,the relationship between the fractal dimension and dynamic peak strength is more regular,otherwise,it will become complicated.The results reveal the dynamic failure mechanism of white sandstone samples,providing assistance for dynamic rock-breaking and disaster prevention in cold regions.
基金Sponsored by National Natural Science Foundation of China(Grant No.42077249)Innovation an Entrepreneurship Training Program for College Students of Hefei University of Technology(Grant Nos.S202410359131 and X202410359244).
文摘Long-term cyclic train loading can cause settlement and deformation of the roadbed,affecting the normal operation of trains.In order to investigate the strain pattern of reinforced sandy soil under train loading,a series of dynamic triaxial tests were carried out using multi-stage loading,focusing on the effects of the number of reinforcement layers,the confining pressure,and the mesh size of the geogrid on the accumulated plastic strain of reinforced sandy soil.Moreover,prediction models were proposed.The test results show that:1)The cumulative plastic strain versus vibration times of the specimens under different reinforcement layers exhibited three stages,namely,the rapid development stage,the rate transformation stage and the stability stage;2)The cumulative plastic strain decreases with increasing the number of reinforcement layers,but the magnitude of the effect of reinforcement on the cumulative plastic strain decreases with increasing the number of reinforcement layers,increasing the perimeter pressure and decreasing the mesh size of the geogrid have similar effects on the cumulative plastic strain pattern as increasing the number of reinforcement layers;3)Combined with the cumulative plastic strain law,a comprehensive model is proposed and the coefficient of determination is greater than 0.99.Furthermore,The cumulative plastic strain evolution law can be effectively predicted.The significance of parameters A,B and C is analyzed in detail.This study can provide theoretical references for further understanding of the deformation characteristics and settlement prediction of railway subgrades.
基金financiallysupported by the National Natural Science Foundation of China(Grant No.42577209)the Natural Science Foundation of Jiangsu Province(Grant No.BK20241489)the Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering,Institute of Rock and Soil Mechanics,Chinese Academy of Sciences(Grant No.SKLGME023009).
文摘This study systematically investigated the coupling effects of confiningpressure and strain rate on the dynamic strength of granite through dynamic triaxial compression tests.A dynamic strength criterion was developed to incorporate these coupling effects for further analysis.Moreover,the research thoroughly revealed the underlying mechanism by which these coupling effects influencethe rock strength.The results revealed that both confiningpressure and strain rate significantly enhanced the dynamic strength of rock;however,a mutual inhibition effect emerged under their coupling.Specifically,as the confiningpressure increased,the strengthening effect of strain rate gradually diminished.Conversely,increasing the strain rate weakened the strengthening effect of confiningpressure.The proposed strength criterion successfully predicted rock strength under various confiningpressures(0-225 MPa)and strain rates(10^(-6)-600 s^(-1)).It achieved an average prediction error of only 8.3%,which represents a 65%improvement in accuracy compared to models that consider confiningpressure and strain rate effects independently.At the micro-mechanism level,increasing confiningpressure and strain rate promoted crack propagation in a transgranular(TG)mode,thereby enhancing the overall rock strength.However,under the coupling effects,the interference and interaction of TG cracks weakened the overall strengthening effect.This indicated that the competitive interaction between confiningpressure and strain rate during crack propagation constitutes the intrinsic mechanism underlying their mutual inhibitory effect on rock strength.This study provides a more accurate theoretical basis for understanding the dynamic responses of rocks and contributes valuable insights for disaster prevention and control in deep rock engineering projects.
文摘Method of testing for dynamic output forces from jet elements is studied, the handwidth is large in testing with this method. By establishing a model of the test system and simulating it, principles of how inherent features of the test system affect the dynamic force test are found out. Thus a theoretical foundation is given for the design and error modification to the actual test system.
基金Supported by the National Support Project (2006BAD29B04)National High Technology Research and Development (863)Projects(2006AA10A303-1)~~
文摘[Objective]The aim was to research on construction of yield formation model of winter wheat.[Method]In the case of variety Shijiazhuang 8,the process of yield trait formation was studied by the dynamic ideal and uniform experimental design;the differences between plant dry weight and population indexes were analyzed by using multiple comparison analysis,and the yield formation model was developed by multiple regression analysis.[Result]The results showed that multiple correlation coefficients of yield formation model ranged from 0.91 to 0.97.[Conclusion]The model was significant which provide certain theoretical base for high yield and high efficiency cultivation of winter wheat.
文摘The oil film thickness of the distribution pair of the bent-axis pump is tested dynamically in this paper. On the basis of synthetical consideration of the leakage flow rate, the loss of power and the ability to resist contaminant of the distribution pair,the parameters used to describe the distribution state are optimized. According to theoretical analyses and experimental research, the structure of the distribution plate is improved, and the ability to resist contaminant wear of the distribution pair is increased. Thus, it is possible to prolong the service life and working reliability of the pump.
基金The National Natural Science Foundation of Chin(No.51378121)
文摘A deformation prediction model for the dynamic creep test is deduced based on the linear viscoelastic（LVE）theory.Then,the defect of the LVE deformation prediction model is analyzed by comparing the prediction of the LVE deformation model with the experimental data.To improve accuracy,a modification of the LVE deformation prediction model is made to simulate the nonlinear property of the deformation of asphalt mixtures,and it is verified by comparing its simulation results with the experimental data.The comparison results show that the LVE deformation prediction model cannot simulate the nonlinear property of the permanent deformation of asphalt mixtures,while the modified deformation prediction model can provide more precise simulations of the whole process of the deformation and the permanent deformation in the dynamic creep test.Thus,the proposed modification greatly improves the accuracy of the LVE deformation prediction model.The modified model can provide a better understanding of the rutting behavior of asphalt pavement.
基金This work was supported by the National Natural Science Foundation of China(Nos.41941018,52074164,and 42077267);the Natural Science Foundation of Shandong Province,China(Nos.2019SDZY04 and ZR2020JQ23)the Project of Shandong Province Higher Educational Youth Innovation Science and Technology Program,China(No.2019KJG013).
文摘In deep underground engineering,rock burst and other dynamic disasters are prone to occur due to stress concentration and energy accumulation in surrounding rock.The control of dynamic disasters requires bolts and cables with high strength,high elongation,and high energy-absorbing capacity.Therefore,a constant resistance energy-absorbing(CREA)material is developed.In this study,the dynamic characteristics of the new material are obtained via the drop hammer tests and the Split Hopkinson Pressure Bar(SHPB)tests of the new material and two common bolt(CB)materials widely used in the field.The test results of drop hammer test and SHPB test show that the percentage elongation of CREA material is more than 2.64 and 3.22 times those of the CB material,and the total impact energy acting on CREA material is more than 18.50 and 21.84 times,respectively,indicating that the new material has high elongation and high energy-absorbing capacity.Subsequently,the CREA bolts and cables using the new material are developed,which are applied in roadways with high stress and strong dynamic disturbance.The field monitoring results show that CREA bolts and cables can effectively control the surrounding rock deformation and ensure engineering safety.
基金Supported by the National Natural Science Foundation of China (10872218,50934006,50534030)Research Foundation for the Doctoral Program of Higher Education of China (200805331143)
文摘Rock drilling machine,INSTRON testing system,and SHPB device are updated to investigate the characteristics of rocks at great depth,with high loads from overburden,tectonic stresses and dynamic impacts due to blasting and boring.It is verified that these testing systems can be used to study the mechanical properties of rock material under coupled static and dynamic loading condition and give useful guidance for the deep mining and underground cavern excavation.Various tests to determine the rock strength,fragmentation behavior,and energy absorption were conducted using the updated testing systems.It is shown that under coupled static-dynamic loads,if the axial prestress is lower than its elastic limit,the rock strength is higher than the individual static or dynamic strength.At the same axial prestress,rock strength under coupled loads rises with the increasing strain rates.Under coupled static and dynamic loads,rock is observed to fail with tensile mode.While shear failure may exist if axial prestress is high enough.In addition,it is shown that the percentage of small particles increases with the increasing axial prestress and impact load based on the analysis of the particle-size distribution of fragments.It is also suggested that the energy absorption ratio of a specimen varies with coupled loads,and the maximum energy absorption ratio for a rock can be obtained with an appropriate combination of static and dynamic loads.
基金State Key Laboratory of Hydroscience and Engineering Under Grant No.2008-TC-2National Natural Science Foundation of China Under Grant No.90510018,50779021 and 90715041
文摘It is well-recognized that a transfer system response delay that reduces the test stability inevitably exists in real-time dynamic hybrid testing （RTDHT）. This paper focuses on the delay-dependent stability and added damping of SDOF systems in RTDHT. The exponential delay term is transferred into a rational fraction by the Pad6 approximation, and the delay-dependent stability conditions and instability mechanism of SDOF RTDHT systems are investigated by the root locus technique. First, the stability conditions are discussed separately for the cases of stiffness, mass, and damping experimental substructure. The use of root locus plots shows that the added damping effect and instability mechanism for mass are different from those for stiffness. For the stiffness experimental substructure case, the instability results from the inherent mode because of an obvious negative damping effect of the delay. For the mass case, the delay introduces an equivalent positive damping into the inherent mode, and instability occurs at an added high frequency mode. Then, the compound stability condition is investigated for a general case and the results show that the mass ratio may have both upper and lower limits to remain stable. Finally, a high-emulational virtual shaking table model is built to validate the stability conclusions.
基金Projects(41672312, 41972294) supported by the National Natural Science Foundation of ChinaProject(2017CFA056) supported by the Outstanding Youth Foundation of Hubei Province, ChinaProject(KFJ170104) supported by the Changsha University of Science & Technology via Open Fund of National Engineering Laboratory of Highway Maintenance Technology, China。
文摘Although the dynamic properties of subgrade soils in seasonally frozen areas have already been studied, few researchers have considered the influence of shallow groundwater during the freeze–thaw(F–T) cycles. So a multifunctional F–T cycle system was developed to imitate the groundwater recharge in the subgrade during the freezing process and a large number of dynamic triaxial experiments were conducted after the F–T cycles. Some significant factors including the F–T cycle number, compaction degree, confining pressure, cyclic deviator stress, loading frequency, and water content were investigated for the resilient modulus of soils. The experimental results indicated that the dynamic resilient modulus of the subgrade was negatively correlated with the cyclic deviator stress, F–T cycle number, and initial water content, whereas the degree of compaction, confining pressure, and loading frequency could enhance the resilient modulus. Furthermore, a modified model considering the F–T cycle number and stress state was established to predict the dynamic resilient modulus. The calculated results of this modified model were very close to the experimental results. Consequently, calculation of the resilient modulus for F–T cycles considering the dynamic load was appropriate. This study provides reference for research focusing on F–T cycles with groundwater supply and the dynamic resilient moduli of subgrade soils in seasonally frozen areas.
基金supported by the National Natural Science Foundation of China (No. 51078035, 20977008)the Fundamental Research Funds for the Central Universities (No. BLJC200902, TD2010-5)+1 种基金the High-Tech Research and Development Program (863) of China (No. 2007AA06Z301)the Major Projects on Control and Rectification of Water Body Pollution (No. 2008ZX07422-002-004, 2008ZX07314-006)
文摘The changes in the physical characteristics of unconditioned and conditioned anaerobic digested sludge （ADS） biosolids, such as capillary suction time （CST）, yield stress, average size and fractal dimensions, were investigated through a CST test, transient and dynamic rheological test and image analysis. The results showed that the optimum polymer dose range was observed when CST or its reciprocal value was employed as an indicator. There were good correlations between the yield stresses determined from both a controlled shear stress test and a strain amplitude sweep test. The yield stress and storage modulus （G＇） increased as the polymer dose increased in most cases. A frequency sweep test revealed that polymer conditioning could extend the frequency sweep ranges for their elastic behaviors over viscous behaviors as well as the gel-like structure in the linear viscoelastic range. These results implied that more deformation energy was stored in this rigid structure, and that elastic behavior became increasingly dominant with the addition of the polymer in most cases, In addition, both the average sizes and two-dimensional fractal dimensions for conditioned ADS biosolids presented a similar up-climax-down variation trend as the polymer doses increased, whereas the critical polymer doses at the highest average sizes or two-dimensional fractal dimensions, were different. Correlation analysis revealed that the conditioned ADS dewaterability was not correlated with the yield stresses, while the average sizes or the two-dimensional fractal dimensions for conditioned ADS biosolids could be taken as the indication parameters for ADS dewaterability.
基金National Natural Science Foundation under Grant Nos.51179093,91215301 and 41274106the Specialized Research Fund for the Doctoral Program of Higher Education under Grant No.20130002110032Tsinghua University Initiative Scientific Research Program under Grant No.20131089285
文摘A solution scheme is proposed in this paper for an existing RTDHT system to simulate large-scale finite element （FE） numerical substructures. The analysis of the FE numerical substructure is split into response analysis and signal generation tasks, and executed in two different target computers in real-time. One target computer implements the response analysis task, wherein a large time-step is used to solve the FE substructure, and another target computer implements the signal generation task, wherein an interpolation program is used to generate control signals in a small time-step to meet the input demand of the controller. By using this strategy, the scale of the FE numerical substructure simulation may be increased significantly. The proposed scheme is initially verified by two FE numerical substructure models with 98 and 1240 degrees of freedom （DOFs）. Thereafter, RTDHTs of a single frame-foundation structure are implemented where the foundation, considered as the numerical substructure, is simulated by the FE model with 1240 DOFs. Good agreements between the results of the RTDHT and those from the FE analysis in ABAQUS are obtained.
