Vitrimers belong to a class of polymeric materials capable of bond exchange reactions,showing great promise for environmental protection and sustainable development.However,studies on the coupling mechanism between th...Vitrimers belong to a class of polymeric materials capable of bond exchange reactions,showing great promise for environmental protection and sustainable development.However,studies on the coupling mechanism between the bond exchange kinetics and segmental dynamics near the glass transition temperature(T_(g))remain scarce.Herein,we employed molecular dynamics simulations to investigate the dynamic heterogeneity of the segment motion and bond exchange in vitrimers.The simulation results revealed that the bond exchange energy barrier exerts a much stronger influence on the bond exchange kinetics than on the segmental dynamics.At lower temperatures,slower segmental relaxation further constraind the bond exchange rate.Additionally,increasing the bond exchange energy barrier markedly enhanced the dynamic heterogeneity of segment motion.A close correlation was observed between heterogeneity and bond exchange.This study elucidated the coupling mechanism between bond exchange and segmental dynamics at the molecular scale,thereby providing a theoretical basis for designing vitrimer materials with tunable dynamic properties.展开更多
Dynamic melt modification of polyethylene via the direct grafting of peroxide fragments shows promise for the development of processable functionalized materials.In this study,four linear low-density polyethylenes(LLD...Dynamic melt modification of polyethylene via the direct grafting of peroxide fragments shows promise for the development of processable functionalized materials.In this study,four linear low-density polyethylenes(LLDPEs)with comparable molecular weights but different short-chain branch(SCB)contents(ranging of 5-66 per 1000 carbon atoms)were modified via dynamic melt mixing using 2 wt% benzoyl peroxide at 145℃ and 50 r/min for 30 min.The influence of SCB content on the processability and structure of the resulting products was systematically investigated.All modified products exhibited good melt processability with melt flow rates(MFR)ranging from 0.46 g/10min to 1.07 g/10min.Products derived from low-SCB LLDPEs showed a lower MFR,higher cross-linking content,a larger number of long-chain branches,and a higher degree of benzoyl grafting.In contrast,those produced from high-SCB LLDPEs exhibited improved processability,reduced cross-linking,fewer long-chain branches,and lower benzoyl grafting levels.A detailed structural investigation of the soluble and insoluble fractions,which were separated using trichlorobenzene fractionation,was conducted to analyze the structural features of various modified products and demonstrate that the SCB content(i.e.,tertiary carbon density)significantly influences radical coupling during dynamic modification.Elevated tertiary carbon density,by introducing greater steric hindrance,suppresses radical coupling during dynamic modification,thereby reducing the efficiency of both crosslinking and peroxide fragment grafting.These findings provide new insights into the structure-reactivity relationships in peroxide-induced polyethylene modification and lay the foundation for tailoring material properties via dynamic processing.展开更多
THE mechanical response and deformation mechanisms of pure nickel under nanoindentation were systematically investigated using molecular dynamics(MD)simulations,with a particular focus on the novel interplay between c...THE mechanical response and deformation mechanisms of pure nickel under nanoindentation were systematically investigated using molecular dynamics(MD)simulations,with a particular focus on the novel interplay between crystallographic orientation,grain boundary(GB)proximity,and pore characteristics(size/location).This study compares single-crystal nickel models along[100],[110],and[111]orientations with equiaxed polycrystalline models containing 0,1,and 2.5 nm pores in surface and subsurface configurations.Our results reveal that crystallographic anisotropy manifests as a 24.4%higher elastic modulus and 22.2%greater hardness in[111]-oriented single crystals compared to[100].Pore-GB synergistic effects are found to dominate the deformation behavior:2.5 nm subsurface pores reduce hardness by 25.2%through stress concentration and dislocation annihilation at GBs,whereas surface pores enable mechanical recovery via accelerated dislocation generation post-collapse.Additionally,size-dependent deformation regimes were identified,with 1 nm pores inducing negligible perturbation due to rapid atomic rearrangement,in contrast with persistent softening in 2.5 nm pores.These findings establish atomic-scale design principles for defect engineering in nickel-based aerospace components,demonstrating how crystallographic orientation,pore configuration,and GB interactions collectively govern nanoindentation behavior.展开更多
In this study,we perform particle-resolved simulations of settling spheroidal particles,considering oblate and prolate spheroids and spheres,and investigate the shape effect on the particle dynamics in suspensions wit...In this study,we perform particle-resolved simulations of settling spheroidal particles,considering oblate and prolate spheroids and spheres,and investigate the shape effect on the particle dynamics in suspensions with volume fraction 1%and 5%.We first examine the single-point statistics of the translational and rotational motion of the settling particles.The horizontal velocity has a symmetrical distribution with standard deviation dependent on the particle shape.The greater horizontal velocity fluctuations of the non-spherical particles,compared to that of spheres,are attributed to the horizontal drift of settling spheroids with oblique orientations induced by the fluid-particle and particle-particle interactions.The fluctuation of particle vertical velocity,instead,is skewed under the effect of wake-induced hydrodynamic interactions.Further,we explore the particle pair statistics,which demonstrate the formation of column-like particle micro-structures for the lowest volume fraction considered.This clustering is more pronounced for spheroidal particles than spheres,due to the stronger attractions among vertically-aligned settling spheroids.Moreover,the particle pair statistics are directly related to the collision rate among the dispersed particles.The local accumulation of oblate/prolate spheroids serves as the major mechanism to promote the particle-particle collisions in dilute suspensions.展开更多
Lead(Pb)is a typical low-melting-point ductile metal and serves as an important model material in the study of dynamic responses.Under shock-wave loading,its dynamic mechanical behavior comprises two key phenomena:pla...Lead(Pb)is a typical low-melting-point ductile metal and serves as an important model material in the study of dynamic responses.Under shock-wave loading,its dynamic mechanical behavior comprises two key phenomena:plastic deformation and shock-induced phase transitions.The underlying mechanisms of these processes are still poorly understood.Revealing these mechanisms remains challenging for experimental approaches.Non-equilibrium molecular dynamics(NEMD)simulations are an alternative theoretical tool for studying dynamic responses,as they capture atomic-scale mechanisms such as defect evolution and deformation pathways.However,due to the limited accuracy of empirical interatomic potentials,the reliability of previous NEMD studies has been questioned.Using our newly developed machine learning potential for Pb-Sn alloys,we revisited the microstructural evolution in response to shock loading under various shock orientations.The results reveal that shock loading along the[001]orientation of Pb exhibits a fast,reversible,and massive phase transition and stacking-fault evolution.The behavior of Pb differs from previous studies by the absence of twinning during plastic deformation.Loading along the[011]orientation leads to slow,irreversible plastic deformation,and a localized FCC-BCC phase transition in the Pitsch orientation relationship.This study provides crucial theoretical insights into the dynamic mechanical response of Pb,offering a theoretical input for understanding the microstructure-performance relationship under extreme conditions.展开更多
Organic electrochemical transistor(OECT)devices demonstrate great promising potential for reservoir computing(RC)systems,but their lack of tunable dynamic characteristics limits their application in multi-temporal sca...Organic electrochemical transistor(OECT)devices demonstrate great promising potential for reservoir computing(RC)systems,but their lack of tunable dynamic characteristics limits their application in multi-temporal scale tasks.In this study,we report an OECT-based neuromorphic device with tunable relaxation time(τ)by introducing an additional vertical back-gate electrode into a planar structure.The dual-gate design enablesτreconfiguration from 93 to 541 ms.The tunable relaxation behaviors can be attributed to the combined effects of planar-gate induced electrochemical doping and back-gateinduced electrostatic coupling,as verified by electrochemical impedance spectroscopy analysis.Furthermore,we used theτ-tunable OECT devices as physical reservoirs in the RC system for intelligent driving trajectory prediction,achieving a significant improvement in prediction accuracy from below 69%to 99%.The results demonstrate that theτ-tunable OECT shows a promising candidate for multi-temporal scale neuromorphic computing applications.展开更多
The outbreak of infectious diseases is the result of a combination of various factors,including season,the movement of individuals,non-pharmaceutical interventions(NPIs)and the effectiveness and availability of vaccin...The outbreak of infectious diseases is the result of a combination of various factors,including season,the movement of individuals,non-pharmaceutical interventions(NPIs)and the effectiveness and availability of vaccines.Taking these key elements into consideration,an almost periodic SVEIR warning model in the patch environment is here proposed.First,in terms of reproduction numbers,our results imply that if the effective reproduction numbers are R_(e)<1,then the disease dies out;if R_(e)>1,then the disease spreads and leads to local outbreaks.Second,the relationships between R_(e)and C_(s1),C_(a1)(see Section 2)are given by numerical simulations.The numerical results show that even if all people are vaccinated,NPIs are still needed because of the potentially low efficacy of vaccines.Furthermore,the numerical results suggest that NPIs and the strengthening of the effective rate of vaccination are essential in order to achieve herd immunity.Theories involving this model effectively explain the transmission mechanism of most infectious diseases,and provide a valuable theoretical basis for analyzing new infectious diseases in the future.Moreover,this model is helpful for the prevention and control of infectious diseases and the formulation of public health safety policies.展开更多
Recycling of waste rubber(WR)is crucial for the sustainable development of the rubber industry.The enhancement of interfacial interactions is the main strategy for waste polymer recycling.However,there is a lack of me...Recycling of waste rubber(WR)is crucial for the sustainable development of the rubber industry.The enhancement of interfacial interactions is the main strategy for waste polymer recycling.However,there is a lack of methods for enhancing the interfacial interactions for WR recycling because WR contains abundant inert C―H bonds.Herein,we designed thioctic acid inverse vulcanization copolymers to endow recycled WR with dynamic disulfide interfacial interactions,significantly improving the mechanical properties of recycled WR.These disulfide interfacial interactions among the recycled WR tend to exchange,which dramatically increases the fractocohesive length and prevents stress concentration near the crack tips.When recycled WR is subjected to external stress,the loads are redistributed across a broad region of adjacent regions instead of being concentrated on a limited length scale,which resists crack propagation.This work effectively recycled WR,providing a strategy for solvent-free reaction-derived inverse vulcanization copolymers to improve the toughness of WR recycling.展开更多
In this study,the dynamic characteristics and microstructures of lacustrine soft clays were studied.Dynamic character tests were conducted on undisturbed,remolded,and saturated lacustrine soft clays,using a dynamic tr...In this study,the dynamic characteristics and microstructures of lacustrine soft clays were studied.Dynamic character tests were conducted on undisturbed,remolded,and saturated lacustrine soft clays,using a dynamic triaxial tester.A scanning electron microscope(SEM)was employed to assess the soil samples after dynamic testing.The results indicate that the dynamic characteristics of lacustrine soft clay were significantly affected by confining pressure and water content.A quantitative relationship was established among confining pressures,water content,and the dynamic shear modulus ratio.The dynamic characteristic parameters of undisturbed,remolded and saturated soil are obviously different,and the original structure can enhance the shear strength of soil.By comparing the results with those from other studies,we found that the dynamic characters of soft clays were considerably varied in different regions,and lacustrine soft clays had a larger dynamic shear modulus ratio and a smaller damping ratio when the dynamic shear strain was large.Using IPP software to process the microstructural images,we found that the soil was dominated by small pores and medium particles,and the roundness of pores and particles had an apparently positive correlation with the maximum diameter.Moreover,the pores and particles of the soil showed fractal characteristics and directionality,and the fractal dimensions and probability entropy were strongly correlated with the macrostructural parameters.Finally,we developed a prediction model for macrostructural and microstructural parameters.展开更多
Photo-assisted lithium–sulfur batteries(PALSBs)offer an eco-friendly solution to address the issue of sluggish reaction kinetics of conventional LSBs.However,designing an efficient photoelectrode for practical implem...Photo-assisted lithium–sulfur batteries(PALSBs)offer an eco-friendly solution to address the issue of sluggish reaction kinetics of conventional LSBs.However,designing an efficient photoelectrode for practical implementation remains a significant challenge.Herein,we construct a free-standing polymer–inorganic hybrid photoelectrode with a direct Z-scheme heterostructure to develop high-efficiency PALSBs.Specifically,polypyrrole(PPy)is in situ vapor-phase polymerized on the surface of N-doped TiO_(2) nanorods supported on carbon cloth(N-TiO_(2)/CC),thereby forming a well-defined p–n heterojunction.This architecture efficiently facilitates the carrier separation of photo-generated electron–hole pairs and significantly enhances carrier transport by creating a built-in electric field.Thus,the PPy@N-TiO_(2)/CC can simultaneously act as a photocatalyst and an electrocatalyst to accelerate the reduction and evolution of sulfur,enabling ultrafast sulfur redox dynamics,as convincingly validated by both theoretical simulations and experimental results.Consequently,the PPy@N-TiO_(2)/CC PALSB achieves a high discharge capacity of 1653 mAh g−1,reaching 98.7%of the theoretical value.Furthermore,5 h of photo-charging without external voltage enables the PALSB to deliver a discharge capacity of 333 mAh g−1,achieving dual-mode energy harvesting capabilities.This work successfully integrates solar energy conversion and storage within a rechargeable battery system,providing a promising strategy for sustainable energy storage technologies.展开更多
Conductive elastomers combining micromechanical sensitivity,lightweight adaptability,and environmental sustainability are critically needed for advanced flexible electronics requiring precise responsiveness and long-t...Conductive elastomers combining micromechanical sensitivity,lightweight adaptability,and environmental sustainability are critically needed for advanced flexible electronics requiring precise responsiveness and long-term wearability;however,the integration of these properties remains a significant challenge.Here,we present a biomass-derived conductive elastomer featuring a rationally engineered dynamic crosslinked network integrated with a tunable microporous architecture.This structural design imparts pronounced micromechanical sensitivity,an ultralow density(~0.25 g cm^(−3)),and superior mechanical compliance for adaptive deformation.Moreover,the unique micro-spring effect derived from the porous architecture ensures exceptional stretchability(>500%elongation at break)and superior resilience,delivering immediate and stable electrical response under both subtle(<1%)and large(>200%)mechanical stimuli.Intrinsic dynamic interactions endow the elastomer with efficient room temperature self-healing and complete recyclability without compromising performance.First-principles simulations clarify the mechanisms behind micropore formation and the resulting functionality.Beyond its facile and mild fabrication process,this work establishes a scalable route toward high-performance,sustainable conductive elastomers tailored for next-generation soft electronics.展开更多
Rheumatoid arthritis(RA)patients face significant psychological challenges alongside physical symptoms,necessitating a comprehensive understanding of how psychological vulnerability and adaptation patterns evolve thro...Rheumatoid arthritis(RA)patients face significant psychological challenges alongside physical symptoms,necessitating a comprehensive understanding of how psychological vulnerability and adaptation patterns evolve throughout the disease course.This review examined 95 studies(2000-2025)from PubMed,Web of Science,and CNKI databases including longitudinal cohorts,randomized controlled trials,and mixed-methods research,to characterize the complex interplay between biological,psychological,and social factors affecting RA patients’mental health.Findings revealed three distinct vulnerability trajectories(45%persistently low,30%fluctuating improvement,25%persistently high)and four adaptation stages,with critical intervention periods occurring 3-6 months postdiagnosis and during disease flares.Multiple factors significantly influence psychological outcomes,including gender(females showing 1.8-fold increased risk),age(younger patients experiencing 42%higher vulnerability),pain intensity,inflammatory markers,and neuroendocrine dysregulation(48%showing cortisol rhythm disruption).Early psychological intervention(within 3 months of diagnosis)demonstrated robust benefits,reducing depression incidence by 42%with effects persisting 24-36 months,while different modalities showed complementary advantages:Cognitive behavioral therapy for depression(Cohen’s d=0.68),mindfulness for pain acceptance(38%improvement),and peer support for meaning reconstruction(25.6%increase).These findings underscore the importance of integrating routine psychological assessment into standard RA care,developing stage-appropriate interventions,and advancing research toward personalized biopsychosocial approaches that address the dynamic psychological dimensions of the disease.展开更多
Fault-tolerant systems are crucial for ensuring the reliability and availability of missioncritical applications in modern computing environments.The dynamic heterogeneous redundancy(DHR)architecture is a key componen...Fault-tolerant systems are crucial for ensuring the reliability and availability of missioncritical applications in modern computing environments.The dynamic heterogeneous redundancy(DHR)architecture is a key component in constructing fault-tolerant systems,particularly in areas such as national security,power networks,and banking private networks.DHR is transforming the cyberspace security industry chain by accommodating a broader range of applications and increasingly capturing the market.However,the development of applications for DHR architecture encounters challenges due to the complexities of handling heterogeneity,managing dynamism,and maintaining usability.To address these issues,we introduce MimicStudio,a comprehensive development framework with a standardized workflow.To our knowledge,MimicStudio is the first effective solution for DHR software development.We present a detailed implementation of MimicStudio with a heterogeneous microcontroller unit project,encompassing three CPUs with different instruction set architectures.The paper evaluates MimicStudio’s support for essential features,including zero-copy synchronization,parallelized build,multi-core collaborative debugging,and dynamic adjustment of the software system’s structure.Our results show that MimicStudio provides a flexible and efficient solution for supporting the dynamic,heterogeneous,and redundant features of fault-tolerant systems.展开更多
In this manuscript,we consider a non-autonomous dynamical system.Using the Carathéodory structure,we define a BS dimension on an arbitrary subset and obtain a Bowen’s equation that illustrates the relation of th...In this manuscript,we consider a non-autonomous dynamical system.Using the Carathéodory structure,we define a BS dimension on an arbitrary subset and obtain a Bowen’s equation that illustrates the relation of the BS dimension to the Pesin-Pitskel topological pressure given by Nazarian[24].Moreover,we establish a variational principle and an inverse variational principle for the BS dimension of non-autonomous dynamical systems.Finally,we also get an analogue of Billingsley’s theorem for the BS dimension of non-autonomous dynamical systems.展开更多
Rydberg-atom-based superheterodyne receivers integrate self-calibration,high sensitivity,a wide operational frequency range,and phase/frequency resolved detection capabilities,demonstrating broad application prospects...Rydberg-atom-based superheterodyne receivers integrate self-calibration,high sensitivity,a wide operational frequency range,and phase/frequency resolved detection capabilities,demonstrating broad application prospects as nextgeneration microwave receivers.Linear gain and linear dynamic range(LDR)are critical metrics for assessing receiver sensitivity and demodulation fidelity,respectively.We numerically solve the four-level master equation and then employ particle swarm optimization(PSO)algorithm to co-optimize linear gain and LDR in atomic superheterodyne receivers based on balanced homodyne detection.Further,we systematically account for dominant dephasing mechanisms in the simulation,encompassing spontaneous decay,transit dephasing,collision dephasing,laser linewidth dephasing,and Doppler averaging.Homodyne readout utilizes both the real and imaginary parts of polarizability for sensing.In the case of the photon shot noise limit,its signal-to-noise ratio(SNR)expression resembles that of direct optical-intensity readout.However,the inherent coherent subtraction operation in homodyne detection significantly suppresses common-mode noise,while appropriately increasing the reference beam power enhances the gain in practical experiments.Indeed,this co-optimization problem,characterized by a high-dimensional variable space,two objectives,and non-convexity,is well-suited for solution by PSO.In addition,probe and coupling detuning contribute equivalently to polarizability and compensate for each other owing to Doppler averaging,thereby reducing the optimization variable space by one.By adopting a product form of linear gain and LDR as the fitness function,the PSO achieves rapid convergence.Here,the effectiveness of the PSO results is verified via the total harmonic distortion(THD).The relative error-based LDR calculation method we proposed efficiently measures receiver response linearity with consuming fewer computational resources.This research is expected to offer valuable insights into enhancing the performance of Rydberg-atom-based superheterodyne receivers.展开更多
Pulsed dynamic electrolysis(PDE),driven by renewable energy,has emerged as an innovative electrocatalytic conversion method,demonstrating significant potential in addressing global energy challenges and promoting sust...Pulsed dynamic electrolysis(PDE),driven by renewable energy,has emerged as an innovative electrocatalytic conversion method,demonstrating significant potential in addressing global energy challenges and promoting sustainable development.Despite significant progress in various electrochemical systems,the regulatory mechanisms of PDE in energy and mass transfer and the lifespan extension of electrolysis systems,particularly in water electrolysis(WE)for hydrogen production,remain insufficiently explored.Therefore,there is an urgent need for a deeper understanding of the unique contributions of PDE in mass transfer enhancement,microenvironment regulation,and hydrogen production optimization,aiming to achieve low-energy consumption,high catalytic activity,and long-term stability in the generation of target products.Here,this review critically examines the microenvironmental effects of PDE on energy and mass transfer,the electrode degradation mechanisms in the lifespan extension of electrolysis systems,and the key factors in enhancing WE for hydrogen production,providing a comprehensive summary of current research progress.The review focuses on the complex regulatory mechanisms of frequency,duty cycle,amplitude,and other factors in hydrogen evolution reaction(HER)performance within PDE strategies,revealing the interrelationships among them.Finally,the potential future directions and challenges for transitioning from laboratory studies to industrial applications are proposed.展开更多
The application of nitrogen fertilizers in agricultural fields can lead to the release of nitrogen-containing gases(NCGs),such as NO_(x),NH_(3) and N_(2)O,which can significantly impact regional atmospheric environmen...The application of nitrogen fertilizers in agricultural fields can lead to the release of nitrogen-containing gases(NCGs),such as NO_(x),NH_(3) and N_(2)O,which can significantly impact regional atmospheric environment and con-tribute to global climate change.However,there remain considerable research gaps in the accurate measurement of NCGs emissions from agricultural fields,hindering the development of effective emission reduction strategies.We improved an open-top dynamic chambers(OTDCs)system and evaluated the performance by comparing the measured and given fluxes of the NCGs.The results showed that the measured fluxes of NO,N_(2)O and NH_(3)were 1%,2%and 7%lower than the given fluxes,respectively.For the determination of NH_(3) concentration,we employed a stripping coil-ion chromatograph(SC-IC)analytical technique,which demonstrated an absorption efficiency for atmospheric NH_(3) exceeding 96.1%across sampling durations of 6 to 60 min.In the summer maize season,we utilized the OTDCs system to measure the exchange fluxes of NO,NH_(3),and N_(2)O from the soil in the North China Plain.Substantial emissions of NO,NH_(3) and N_(2)O were recorded following fertilization,with peaks of 107,309,1239 ng N/(m^(2)·s),respectively.Notably,significant NCGs emissions were observed following sus-tained heavy rainfall one month after fertilization,particularly with NH_(3) peak being 4.5 times higher than that observed immediately after fertilization.Our results demonstrate that the OTDCs system accurately reflects the emission characteristics of soil NCGs and meets the requirements for long-term and continuous flux observation.展开更多
As the core determinant of lithium-ion battery performance,electrode materials play a crucial role in defining the battery's capacity,cycling stability,and durability.During charging and discharging,electrode mate...As the core determinant of lithium-ion battery performance,electrode materials play a crucial role in defining the battery's capacity,cycling stability,and durability.During charging and discharging,electrode materials undergo complex ion intercalation and deintercalation processes,accompanied by defect formation and structural evolution.However,the microscopic mechanisms underlying processes such as cation disordering,lattice oxygen loss,and stage structure formation are still not fully understood.To address these challenges,we have developed the Electrode Dynamic Ion Intercalation/Deintercalation Simulator(EDIS),a software platform designed to simulate the dynamic processes of ion intercalation and deintercalation in electrode materials.Leveraging high-precision machine learning potentials,EDIS can efficiently model structural evolution and lithium-ion diffusion behavior under various states of charge and discharge,achieving accuracy approaching that of quantum mechanical methods in relevant chemical spaces.The software supports quantitative analysis of how variations in lithium-ion concentration and distribution affect lithium-ion transport properties,enables evaluation of the impact of structural defects,and allows for tracking of both structural evolution and transport characteristics during continuous cycling.EDIS is versatile and can be extended to sodium-ion batteries and related systems.By enabling in-depth analysis of these microscopic processes,EDIS provides a robust theoretical tool for mechanistic studies and the rational design of high-performance electrode materials for next-generation lithium-ion batteries.展开更多
To address the issues of frequent identity switches(IDs)and degraded identification accuracy in multi object tracking(MOT)under complex occlusion scenarios,this study proposes an occlusion-robust tracking framework ba...To address the issues of frequent identity switches(IDs)and degraded identification accuracy in multi object tracking(MOT)under complex occlusion scenarios,this study proposes an occlusion-robust tracking framework based on face-pedestrian joint feature modeling.By constructing a joint tracking model centered on“intra-class independent tracking+cross-category dynamic binding”,designing a multi-modal matching metric with spatio-temporal and appearance constraints,and innovatively introducing a cross-category feature mutual verification mechanism and a dual matching strategy,this work effectively resolves performance degradation in traditional single-category tracking methods caused by short-term occlusion,cross-camera tracking,and crowded environments.Experiments on the Chokepoint_Face_Pedestrian_Track test set demonstrate that in complex scenes,the proposed method improves Face-Pedestrian Matching F1 area under the curve(F1 AUC)by approximately 4 to 43 percentage points compared to several traditional methods.The joint tracking model achieves overall performance metrics of IDF1:85.1825%and MOTA:86.5956%,representing improvements of 0.91 and 0.06 percentage points,respectively,over the baseline model.Ablation studies confirm the effectiveness of key modules such as the Intersection over Area(IoA)/Intersection over Union(IoU)joint metric and dynamic threshold adjustment,validating the significant role of the cross-category identity matching mechanism in enhancing tracking stability.Our_model shows a 16.7%frame per second(FPS)drop vs.fairness of detection and re-identification in multiple object tracking(FairMOT),with its cross-category binding module adding aboute 10%overhead,yet maintains near-real-time performance for essential face-pedestrian tracking at small resolutions.展开更多
Lateral movement represents the most covert and critical phase of Advanced Persistent Threats(APTs),and its detection still faces two primary challenges:sample scarcity and“cold start”of new entities.To address thes...Lateral movement represents the most covert and critical phase of Advanced Persistent Threats(APTs),and its detection still faces two primary challenges:sample scarcity and“cold start”of new entities.To address these challenges,we propose an Uncertainty-Driven Graph Embedding-Enhanced Lateral Movement Detection framework(UGEA-LMD).First,the framework employs event-level incremental encoding on a continuous-time graph to capture fine-grained behavioral evolution,enabling newly appearing nodes to retain temporal contextual awareness even in the absence of historical interactions and thereby fundamentally mitigating the cold-start problem.Second,in the embedding space,we model the dependency structure among feature dimensions using a Gaussian copula to quantify the uncertainty distribution,and generate augmented samples with consistent structural and semantic properties through adaptive sampling,thus expanding the representation space of sparse samples and enhancing the model’s generalization under sparse sample conditions.Unlike static graph methods that cannot model temporal dependencies or data augmentation techniques that depend on predefined structures,UGEA-LMD offers both superior temporaldynamic modeling and structural generalization.Experimental results on the large-scale LANL log dataset demonstrate that,under the transductive setting,UGEA-LMD achieves an AUC of 0.9254;even when 10%of nodes or edges are withheld during training,UGEA-LMD significantly outperforms baseline methods on metrics such as recall and AUC,confirming its robustness and generalization capability in sparse-sample and cold-start scenarios.展开更多
基金financially supported by the National Natural Science Foundation of China(Nos.52173020 and 52573023)。
文摘Vitrimers belong to a class of polymeric materials capable of bond exchange reactions,showing great promise for environmental protection and sustainable development.However,studies on the coupling mechanism between the bond exchange kinetics and segmental dynamics near the glass transition temperature(T_(g))remain scarce.Herein,we employed molecular dynamics simulations to investigate the dynamic heterogeneity of the segment motion and bond exchange in vitrimers.The simulation results revealed that the bond exchange energy barrier exerts a much stronger influence on the bond exchange kinetics than on the segmental dynamics.At lower temperatures,slower segmental relaxation further constraind the bond exchange rate.Additionally,increasing the bond exchange energy barrier markedly enhanced the dynamic heterogeneity of segment motion.A close correlation was observed between heterogeneity and bond exchange.This study elucidated the coupling mechanism between bond exchange and segmental dynamics at the molecular scale,thereby providing a theoretical basis for designing vitrimer materials with tunable dynamic properties.
基金financially supported by the Science and Technology Project of PetroChina Company Limited,China(No.2022DJ6314)the National Natural Science Foundation of China(No.52173056)。
文摘Dynamic melt modification of polyethylene via the direct grafting of peroxide fragments shows promise for the development of processable functionalized materials.In this study,four linear low-density polyethylenes(LLDPEs)with comparable molecular weights but different short-chain branch(SCB)contents(ranging of 5-66 per 1000 carbon atoms)were modified via dynamic melt mixing using 2 wt% benzoyl peroxide at 145℃ and 50 r/min for 30 min.The influence of SCB content on the processability and structure of the resulting products was systematically investigated.All modified products exhibited good melt processability with melt flow rates(MFR)ranging from 0.46 g/10min to 1.07 g/10min.Products derived from low-SCB LLDPEs showed a lower MFR,higher cross-linking content,a larger number of long-chain branches,and a higher degree of benzoyl grafting.In contrast,those produced from high-SCB LLDPEs exhibited improved processability,reduced cross-linking,fewer long-chain branches,and lower benzoyl grafting levels.A detailed structural investigation of the soluble and insoluble fractions,which were separated using trichlorobenzene fractionation,was conducted to analyze the structural features of various modified products and demonstrate that the SCB content(i.e.,tertiary carbon density)significantly influences radical coupling during dynamic modification.Elevated tertiary carbon density,by introducing greater steric hindrance,suppresses radical coupling during dynamic modification,thereby reducing the efficiency of both crosslinking and peroxide fragment grafting.These findings provide new insights into the structure-reactivity relationships in peroxide-induced polyethylene modification and lay the foundation for tailoring material properties via dynamic processing.
基金The National Natural Science Foundation of China(Grant No.12462006)Beijing Institute of Structure and Environment Engineering Joint Innovation Fund(No.BQJJ202414).
文摘THE mechanical response and deformation mechanisms of pure nickel under nanoindentation were systematically investigated using molecular dynamics(MD)simulations,with a particular focus on the novel interplay between crystallographic orientation,grain boundary(GB)proximity,and pore characteristics(size/location).This study compares single-crystal nickel models along[100],[110],and[111]orientations with equiaxed polycrystalline models containing 0,1,and 2.5 nm pores in surface and subsurface configurations.Our results reveal that crystallographic anisotropy manifests as a 24.4%higher elastic modulus and 22.2%greater hardness in[111]-oriented single crystals compared to[100].Pore-GB synergistic effects are found to dominate the deformation behavior:2.5 nm subsurface pores reduce hardness by 25.2%through stress concentration and dislocation annihilation at GBs,whereas surface pores enable mechanical recovery via accelerated dislocation generation post-collapse.Additionally,size-dependent deformation regimes were identified,with 1 nm pores inducing negligible perturbation due to rapid atomic rearrangement,in contrast with persistent softening in 2.5 nm pores.These findings establish atomic-scale design principles for defect engineering in nickel-based aerospace components,demonstrating how crystallographic orientation,pore configuration,and GB interactions collectively govern nanoindentation behavior.
基金supported by the National Natural Science Foundation of China(Grant Nos.92252104,12388101,and 12472224).
文摘In this study,we perform particle-resolved simulations of settling spheroidal particles,considering oblate and prolate spheroids and spheres,and investigate the shape effect on the particle dynamics in suspensions with volume fraction 1%and 5%.We first examine the single-point statistics of the translational and rotational motion of the settling particles.The horizontal velocity has a symmetrical distribution with standard deviation dependent on the particle shape.The greater horizontal velocity fluctuations of the non-spherical particles,compared to that of spheres,are attributed to the horizontal drift of settling spheroids with oblique orientations induced by the fluid-particle and particle-particle interactions.The fluctuation of particle vertical velocity,instead,is skewed under the effect of wake-induced hydrodynamic interactions.Further,we explore the particle pair statistics,which demonstrate the formation of column-like particle micro-structures for the lowest volume fraction considered.This clustering is more pronounced for spheroidal particles than spheres,due to the stronger attractions among vertically-aligned settling spheroids.Moreover,the particle pair statistics are directly related to the collision rate among the dispersed particles.The local accumulation of oblate/prolate spheroids serves as the major mechanism to promote the particle-particle collisions in dilute suspensions.
基金supported by the National Key R&D Program of China(Grant No.2022YFA1004300)the National Natural Science Foundation of China(Grant No.12404004)。
文摘Lead(Pb)is a typical low-melting-point ductile metal and serves as an important model material in the study of dynamic responses.Under shock-wave loading,its dynamic mechanical behavior comprises two key phenomena:plastic deformation and shock-induced phase transitions.The underlying mechanisms of these processes are still poorly understood.Revealing these mechanisms remains challenging for experimental approaches.Non-equilibrium molecular dynamics(NEMD)simulations are an alternative theoretical tool for studying dynamic responses,as they capture atomic-scale mechanisms such as defect evolution and deformation pathways.However,due to the limited accuracy of empirical interatomic potentials,the reliability of previous NEMD studies has been questioned.Using our newly developed machine learning potential for Pb-Sn alloys,we revisited the microstructural evolution in response to shock loading under various shock orientations.The results reveal that shock loading along the[001]orientation of Pb exhibits a fast,reversible,and massive phase transition and stacking-fault evolution.The behavior of Pb differs from previous studies by the absence of twinning during plastic deformation.Loading along the[011]orientation leads to slow,irreversible plastic deformation,and a localized FCC-BCC phase transition in the Pitsch orientation relationship.This study provides crucial theoretical insights into the dynamic mechanical response of Pb,offering a theoretical input for understanding the microstructure-performance relationship under extreme conditions.
基金supported by the National Key Research and Development Program of China under Grant 2022YFB3608300in part by the National Nature Science Foundation of China(NSFC)under Grants 62404050,U2341218,62574056,62204052。
文摘Organic electrochemical transistor(OECT)devices demonstrate great promising potential for reservoir computing(RC)systems,but their lack of tunable dynamic characteristics limits their application in multi-temporal scale tasks.In this study,we report an OECT-based neuromorphic device with tunable relaxation time(τ)by introducing an additional vertical back-gate electrode into a planar structure.The dual-gate design enablesτreconfiguration from 93 to 541 ms.The tunable relaxation behaviors can be attributed to the combined effects of planar-gate induced electrochemical doping and back-gateinduced electrostatic coupling,as verified by electrochemical impedance spectroscopy analysis.Furthermore,we used theτ-tunable OECT devices as physical reservoirs in the RC system for intelligent driving trajectory prediction,achieving a significant improvement in prediction accuracy from below 69%to 99%.The results demonstrate that theτ-tunable OECT shows a promising candidate for multi-temporal scale neuromorphic computing applications.
基金supported by the NSFC(11501269)and the Natural Science Foundation of Gansu Province(23JRRA1041).
文摘The outbreak of infectious diseases is the result of a combination of various factors,including season,the movement of individuals,non-pharmaceutical interventions(NPIs)and the effectiveness and availability of vaccines.Taking these key elements into consideration,an almost periodic SVEIR warning model in the patch environment is here proposed.First,in terms of reproduction numbers,our results imply that if the effective reproduction numbers are R_(e)<1,then the disease dies out;if R_(e)>1,then the disease spreads and leads to local outbreaks.Second,the relationships between R_(e)and C_(s1),C_(a1)(see Section 2)are given by numerical simulations.The numerical results show that even if all people are vaccinated,NPIs are still needed because of the potentially low efficacy of vaccines.Furthermore,the numerical results suggest that NPIs and the strengthening of the effective rate of vaccination are essential in order to achieve herd immunity.Theories involving this model effectively explain the transmission mechanism of most infectious diseases,and provide a valuable theoretical basis for analyzing new infectious diseases in the future.Moreover,this model is helpful for the prevention and control of infectious diseases and the formulation of public health safety policies.
基金financially supported by the National Natural Science Foundation of China(No.52363007)。
文摘Recycling of waste rubber(WR)is crucial for the sustainable development of the rubber industry.The enhancement of interfacial interactions is the main strategy for waste polymer recycling.However,there is a lack of methods for enhancing the interfacial interactions for WR recycling because WR contains abundant inert C―H bonds.Herein,we designed thioctic acid inverse vulcanization copolymers to endow recycled WR with dynamic disulfide interfacial interactions,significantly improving the mechanical properties of recycled WR.These disulfide interfacial interactions among the recycled WR tend to exchange,which dramatically increases the fractocohesive length and prevents stress concentration near the crack tips.When recycled WR is subjected to external stress,the loads are redistributed across a broad region of adjacent regions instead of being concentrated on a limited length scale,which resists crack propagation.This work effectively recycled WR,providing a strategy for solvent-free reaction-derived inverse vulcanization copolymers to improve the toughness of WR recycling.
基金National Natural Science Foundation of China under Grant No.52278340Natural Science Foundation of Hebei Province under Grant No.E2023202028。
文摘In this study,the dynamic characteristics and microstructures of lacustrine soft clays were studied.Dynamic character tests were conducted on undisturbed,remolded,and saturated lacustrine soft clays,using a dynamic triaxial tester.A scanning electron microscope(SEM)was employed to assess the soil samples after dynamic testing.The results indicate that the dynamic characteristics of lacustrine soft clay were significantly affected by confining pressure and water content.A quantitative relationship was established among confining pressures,water content,and the dynamic shear modulus ratio.The dynamic characteristic parameters of undisturbed,remolded and saturated soil are obviously different,and the original structure can enhance the shear strength of soil.By comparing the results with those from other studies,we found that the dynamic characters of soft clays were considerably varied in different regions,and lacustrine soft clays had a larger dynamic shear modulus ratio and a smaller damping ratio when the dynamic shear strain was large.Using IPP software to process the microstructural images,we found that the soil was dominated by small pores and medium particles,and the roundness of pores and particles had an apparently positive correlation with the maximum diameter.Moreover,the pores and particles of the soil showed fractal characteristics and directionality,and the fractal dimensions and probability entropy were strongly correlated with the macrostructural parameters.Finally,we developed a prediction model for macrostructural and microstructural parameters.
基金financial support from the National Natural Science Foundation of China(22109127)the Chinese Postdoctoral Science Foundation(2021M702666),+1 种基金he Research Fund of the State Key Laboratory of Solidification Processing(NPU),China(Grant No.2023-TS-02)financial support from the Youth Project of"Shaanxi High-level Talents Introduction Plan"and the Key Laboratory of Advanced Energy Materials Chemistry(Ministry of Education)are also sincerely appreciated.
文摘Photo-assisted lithium–sulfur batteries(PALSBs)offer an eco-friendly solution to address the issue of sluggish reaction kinetics of conventional LSBs.However,designing an efficient photoelectrode for practical implementation remains a significant challenge.Herein,we construct a free-standing polymer–inorganic hybrid photoelectrode with a direct Z-scheme heterostructure to develop high-efficiency PALSBs.Specifically,polypyrrole(PPy)is in situ vapor-phase polymerized on the surface of N-doped TiO_(2) nanorods supported on carbon cloth(N-TiO_(2)/CC),thereby forming a well-defined p–n heterojunction.This architecture efficiently facilitates the carrier separation of photo-generated electron–hole pairs and significantly enhances carrier transport by creating a built-in electric field.Thus,the PPy@N-TiO_(2)/CC can simultaneously act as a photocatalyst and an electrocatalyst to accelerate the reduction and evolution of sulfur,enabling ultrafast sulfur redox dynamics,as convincingly validated by both theoretical simulations and experimental results.Consequently,the PPy@N-TiO_(2)/CC PALSB achieves a high discharge capacity of 1653 mAh g−1,reaching 98.7%of the theoretical value.Furthermore,5 h of photo-charging without external voltage enables the PALSB to deliver a discharge capacity of 333 mAh g−1,achieving dual-mode energy harvesting capabilities.This work successfully integrates solar energy conversion and storage within a rechargeable battery system,providing a promising strategy for sustainable energy storage technologies.
基金supported by National Natural Science Foundation of China(No.52103044)Double First-Class Initiative University of Science and Technology of China(KY2400000037)the Young Talent Programme(GG2400007009).
文摘Conductive elastomers combining micromechanical sensitivity,lightweight adaptability,and environmental sustainability are critically needed for advanced flexible electronics requiring precise responsiveness and long-term wearability;however,the integration of these properties remains a significant challenge.Here,we present a biomass-derived conductive elastomer featuring a rationally engineered dynamic crosslinked network integrated with a tunable microporous architecture.This structural design imparts pronounced micromechanical sensitivity,an ultralow density(~0.25 g cm^(−3)),and superior mechanical compliance for adaptive deformation.Moreover,the unique micro-spring effect derived from the porous architecture ensures exceptional stretchability(>500%elongation at break)and superior resilience,delivering immediate and stable electrical response under both subtle(<1%)and large(>200%)mechanical stimuli.Intrinsic dynamic interactions endow the elastomer with efficient room temperature self-healing and complete recyclability without compromising performance.First-principles simulations clarify the mechanisms behind micropore formation and the resulting functionality.Beyond its facile and mild fabrication process,this work establishes a scalable route toward high-performance,sustainable conductive elastomers tailored for next-generation soft electronics.
基金Supported by Chongqing Health Commission and Chongqing Science and Technology Bureau,No.2023MSXM182。
文摘Rheumatoid arthritis(RA)patients face significant psychological challenges alongside physical symptoms,necessitating a comprehensive understanding of how psychological vulnerability and adaptation patterns evolve throughout the disease course.This review examined 95 studies(2000-2025)from PubMed,Web of Science,and CNKI databases including longitudinal cohorts,randomized controlled trials,and mixed-methods research,to characterize the complex interplay between biological,psychological,and social factors affecting RA patients’mental health.Findings revealed three distinct vulnerability trajectories(45%persistently low,30%fluctuating improvement,25%persistently high)and four adaptation stages,with critical intervention periods occurring 3-6 months postdiagnosis and during disease flares.Multiple factors significantly influence psychological outcomes,including gender(females showing 1.8-fold increased risk),age(younger patients experiencing 42%higher vulnerability),pain intensity,inflammatory markers,and neuroendocrine dysregulation(48%showing cortisol rhythm disruption).Early psychological intervention(within 3 months of diagnosis)demonstrated robust benefits,reducing depression incidence by 42%with effects persisting 24-36 months,while different modalities showed complementary advantages:Cognitive behavioral therapy for depression(Cohen’s d=0.68),mindfulness for pain acceptance(38%improvement),and peer support for meaning reconstruction(25.6%increase).These findings underscore the importance of integrating routine psychological assessment into standard RA care,developing stage-appropriate interventions,and advancing research toward personalized biopsychosocial approaches that address the dynamic psychological dimensions of the disease.
基金supported by National Key Research and Development Program of China(No.2023YFB 4404200).
文摘Fault-tolerant systems are crucial for ensuring the reliability and availability of missioncritical applications in modern computing environments.The dynamic heterogeneous redundancy(DHR)architecture is a key component in constructing fault-tolerant systems,particularly in areas such as national security,power networks,and banking private networks.DHR is transforming the cyberspace security industry chain by accommodating a broader range of applications and increasingly capturing the market.However,the development of applications for DHR architecture encounters challenges due to the complexities of handling heterogeneity,managing dynamism,and maintaining usability.To address these issues,we introduce MimicStudio,a comprehensive development framework with a standardized workflow.To our knowledge,MimicStudio is the first effective solution for DHR software development.We present a detailed implementation of MimicStudio with a heterogeneous microcontroller unit project,encompassing three CPUs with different instruction set architectures.The paper evaluates MimicStudio’s support for essential features,including zero-copy synchronization,parallelized build,multi-core collaborative debugging,and dynamic adjustment of the software system’s structure.Our results show that MimicStudio provides a flexible and efficient solution for supporting the dynamic,heterogeneous,and redundant features of fault-tolerant systems.
基金supported by the NSFC(12461012)and the NSF of Chongqing(CSTB2024NSCQ-MSX1246).
文摘In this manuscript,we consider a non-autonomous dynamical system.Using the Carathéodory structure,we define a BS dimension on an arbitrary subset and obtain a Bowen’s equation that illustrates the relation of the BS dimension to the Pesin-Pitskel topological pressure given by Nazarian[24].Moreover,we establish a variational principle and an inverse variational principle for the BS dimension of non-autonomous dynamical systems.Finally,we also get an analogue of Billingsley’s theorem for the BS dimension of non-autonomous dynamical systems.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.62331024 and 62571549)the National Key Research and Development Program of China(Grant No.2022YFB2802804)。
文摘Rydberg-atom-based superheterodyne receivers integrate self-calibration,high sensitivity,a wide operational frequency range,and phase/frequency resolved detection capabilities,demonstrating broad application prospects as nextgeneration microwave receivers.Linear gain and linear dynamic range(LDR)are critical metrics for assessing receiver sensitivity and demodulation fidelity,respectively.We numerically solve the four-level master equation and then employ particle swarm optimization(PSO)algorithm to co-optimize linear gain and LDR in atomic superheterodyne receivers based on balanced homodyne detection.Further,we systematically account for dominant dephasing mechanisms in the simulation,encompassing spontaneous decay,transit dephasing,collision dephasing,laser linewidth dephasing,and Doppler averaging.Homodyne readout utilizes both the real and imaginary parts of polarizability for sensing.In the case of the photon shot noise limit,its signal-to-noise ratio(SNR)expression resembles that of direct optical-intensity readout.However,the inherent coherent subtraction operation in homodyne detection significantly suppresses common-mode noise,while appropriately increasing the reference beam power enhances the gain in practical experiments.Indeed,this co-optimization problem,characterized by a high-dimensional variable space,two objectives,and non-convexity,is well-suited for solution by PSO.In addition,probe and coupling detuning contribute equivalently to polarizability and compensate for each other owing to Doppler averaging,thereby reducing the optimization variable space by one.By adopting a product form of linear gain and LDR as the fitness function,the PSO achieves rapid convergence.Here,the effectiveness of the PSO results is verified via the total harmonic distortion(THD).The relative error-based LDR calculation method we proposed efficiently measures receiver response linearity with consuming fewer computational resources.This research is expected to offer valuable insights into enhancing the performance of Rydberg-atom-based superheterodyne receivers.
基金financially supported by the Key Research and Development Program of Heilongjiang Province(No.2024ZXJ03C06)National Natural Science Foundation of China(No.52476192,No.52106237)+1 种基金Natural Science Foundation of Heilongjiang Province(No.YQ2022E027)Technology Project of China Datang Technology Innovation Co.,Ltd(No.DTKC-2024-20610).
文摘Pulsed dynamic electrolysis(PDE),driven by renewable energy,has emerged as an innovative electrocatalytic conversion method,demonstrating significant potential in addressing global energy challenges and promoting sustainable development.Despite significant progress in various electrochemical systems,the regulatory mechanisms of PDE in energy and mass transfer and the lifespan extension of electrolysis systems,particularly in water electrolysis(WE)for hydrogen production,remain insufficiently explored.Therefore,there is an urgent need for a deeper understanding of the unique contributions of PDE in mass transfer enhancement,microenvironment regulation,and hydrogen production optimization,aiming to achieve low-energy consumption,high catalytic activity,and long-term stability in the generation of target products.Here,this review critically examines the microenvironmental effects of PDE on energy and mass transfer,the electrode degradation mechanisms in the lifespan extension of electrolysis systems,and the key factors in enhancing WE for hydrogen production,providing a comprehensive summary of current research progress.The review focuses on the complex regulatory mechanisms of frequency,duty cycle,amplitude,and other factors in hydrogen evolution reaction(HER)performance within PDE strategies,revealing the interrelationships among them.Finally,the potential future directions and challenges for transitioning from laboratory studies to industrial applications are proposed.
基金supported by the National Key Research and Develop-ment Program(No.2022YFC3701103)the National Natural Science Foundation of China(Nos.42130714 and 41931287).
文摘The application of nitrogen fertilizers in agricultural fields can lead to the release of nitrogen-containing gases(NCGs),such as NO_(x),NH_(3) and N_(2)O,which can significantly impact regional atmospheric environment and con-tribute to global climate change.However,there remain considerable research gaps in the accurate measurement of NCGs emissions from agricultural fields,hindering the development of effective emission reduction strategies.We improved an open-top dynamic chambers(OTDCs)system and evaluated the performance by comparing the measured and given fluxes of the NCGs.The results showed that the measured fluxes of NO,N_(2)O and NH_(3)were 1%,2%and 7%lower than the given fluxes,respectively.For the determination of NH_(3) concentration,we employed a stripping coil-ion chromatograph(SC-IC)analytical technique,which demonstrated an absorption efficiency for atmospheric NH_(3) exceeding 96.1%across sampling durations of 6 to 60 min.In the summer maize season,we utilized the OTDCs system to measure the exchange fluxes of NO,NH_(3),and N_(2)O from the soil in the North China Plain.Substantial emissions of NO,NH_(3) and N_(2)O were recorded following fertilization,with peaks of 107,309,1239 ng N/(m^(2)·s),respectively.Notably,significant NCGs emissions were observed following sus-tained heavy rainfall one month after fertilization,particularly with NH_(3) peak being 4.5 times higher than that observed immediately after fertilization.Our results demonstrate that the OTDCs system accurately reflects the emission characteristics of soil NCGs and meets the requirements for long-term and continuous flux observation.
基金supported by the Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDB1040300)the National Natural Science Foundation of China(Grant No.52172258)。
文摘As the core determinant of lithium-ion battery performance,electrode materials play a crucial role in defining the battery's capacity,cycling stability,and durability.During charging and discharging,electrode materials undergo complex ion intercalation and deintercalation processes,accompanied by defect formation and structural evolution.However,the microscopic mechanisms underlying processes such as cation disordering,lattice oxygen loss,and stage structure formation are still not fully understood.To address these challenges,we have developed the Electrode Dynamic Ion Intercalation/Deintercalation Simulator(EDIS),a software platform designed to simulate the dynamic processes of ion intercalation and deintercalation in electrode materials.Leveraging high-precision machine learning potentials,EDIS can efficiently model structural evolution and lithium-ion diffusion behavior under various states of charge and discharge,achieving accuracy approaching that of quantum mechanical methods in relevant chemical spaces.The software supports quantitative analysis of how variations in lithium-ion concentration and distribution affect lithium-ion transport properties,enables evaluation of the impact of structural defects,and allows for tracking of both structural evolution and transport characteristics during continuous cycling.EDIS is versatile and can be extended to sodium-ion batteries and related systems.By enabling in-depth analysis of these microscopic processes,EDIS provides a robust theoretical tool for mechanistic studies and the rational design of high-performance electrode materials for next-generation lithium-ion batteries.
基金supported by the confidential research grant No.a8317。
文摘To address the issues of frequent identity switches(IDs)and degraded identification accuracy in multi object tracking(MOT)under complex occlusion scenarios,this study proposes an occlusion-robust tracking framework based on face-pedestrian joint feature modeling.By constructing a joint tracking model centered on“intra-class independent tracking+cross-category dynamic binding”,designing a multi-modal matching metric with spatio-temporal and appearance constraints,and innovatively introducing a cross-category feature mutual verification mechanism and a dual matching strategy,this work effectively resolves performance degradation in traditional single-category tracking methods caused by short-term occlusion,cross-camera tracking,and crowded environments.Experiments on the Chokepoint_Face_Pedestrian_Track test set demonstrate that in complex scenes,the proposed method improves Face-Pedestrian Matching F1 area under the curve(F1 AUC)by approximately 4 to 43 percentage points compared to several traditional methods.The joint tracking model achieves overall performance metrics of IDF1:85.1825%and MOTA:86.5956%,representing improvements of 0.91 and 0.06 percentage points,respectively,over the baseline model.Ablation studies confirm the effectiveness of key modules such as the Intersection over Area(IoA)/Intersection over Union(IoU)joint metric and dynamic threshold adjustment,validating the significant role of the cross-category identity matching mechanism in enhancing tracking stability.Our_model shows a 16.7%frame per second(FPS)drop vs.fairness of detection and re-identification in multiple object tracking(FairMOT),with its cross-category binding module adding aboute 10%overhead,yet maintains near-real-time performance for essential face-pedestrian tracking at small resolutions.
基金supported by the Zhongyuan University of Technology Discipline Backbone Teacher Support Program Project(No.GG202417)the Key Research and Development Program of Henan under Grant 251111212000.
文摘Lateral movement represents the most covert and critical phase of Advanced Persistent Threats(APTs),and its detection still faces two primary challenges:sample scarcity and“cold start”of new entities.To address these challenges,we propose an Uncertainty-Driven Graph Embedding-Enhanced Lateral Movement Detection framework(UGEA-LMD).First,the framework employs event-level incremental encoding on a continuous-time graph to capture fine-grained behavioral evolution,enabling newly appearing nodes to retain temporal contextual awareness even in the absence of historical interactions and thereby fundamentally mitigating the cold-start problem.Second,in the embedding space,we model the dependency structure among feature dimensions using a Gaussian copula to quantify the uncertainty distribution,and generate augmented samples with consistent structural and semantic properties through adaptive sampling,thus expanding the representation space of sparse samples and enhancing the model’s generalization under sparse sample conditions.Unlike static graph methods that cannot model temporal dependencies or data augmentation techniques that depend on predefined structures,UGEA-LMD offers both superior temporaldynamic modeling and structural generalization.Experimental results on the large-scale LANL log dataset demonstrate that,under the transductive setting,UGEA-LMD achieves an AUC of 0.9254;even when 10%of nodes or edges are withheld during training,UGEA-LMD significantly outperforms baseline methods on metrics such as recall and AUC,confirming its robustness and generalization capability in sparse-sample and cold-start scenarios.
