The flow stress behavior of GH4033 superalloy was determined by the hot compression tests at the temperatures of 1223-1473 K and the total strains of 0.6 with the strain rates of 0.001-30.0 s^(-1) by using cylindrical...The flow stress behavior of GH4033 superalloy was determined by the hot compression tests at the temperatures of 1223-1473 K and the total strains of 0.6 with the strain rates of 0.001-30.0 s^(-1) by using cylindrical samples.The processing maps based on the dynamic material model(DMM)combined with the corresponding microstructure observations indicate the reasonable processing domain locating at the strain rates of 0.1-1.0 s^(-1) and the deformation temperature of 1273-1423 K.Meanwhile,the numerical simulation based on finite element model(FEM)described the variation of the effective strain,effective strain rate and the temperature for the core node,and unveiled the influence of the hot rolling parameters considering the initial temperature(T_(0))range of 1223-1473 K and the first-stand biting velocity(v_(0))range of 0.15-0.35 m·s^(-1).Furthermore,the deformation stability of GH4033 superalloy in the round rod hot continuous rolling(HCR)process is described and analyzed by coupling the three-dimensional(3-D)processing map,and the spatial trajectory lines were determined by the numerically simulated temperatures,the strains and the strain rates.Finally,the results show that the hot deformation stability of GH4033 can be achieved by the rolling process parameters located at T_(0)=1423 K and v_(0)=0.25 m·s^(-1).Additionally,the practical HCR processes as T_(0)=1423 K and v_(0)=0.15,0.25,0.35 m·s^(-1) were operated to verify the influence of the hot rolling parameters on the hot deformation stability by the microstructure observation of the final products.展开更多
1 Results Supramolecular chemistry is actively exploring systems undergoing self-organization.The design of molecular information controlled,"programmed"and functional self-organizing systems provides an ori...1 Results Supramolecular chemistry is actively exploring systems undergoing self-organization.The design of molecular information controlled,"programmed"and functional self-organizing systems provides an original approach to nanoscience and nanotechnology.The spontaneous but controlled generation of well-defined,functional molecular and supramolecular architectures of nanometric size through self-organization represents a means of performing programmed engineering and processing of functional nanostruct...展开更多
How the wave propagation analysis plays a key role in the studies of dynamic response of materials at high strain rates is analyzed. For the wave propagation technique, the followings are important: the loading and un...How the wave propagation analysis plays a key role in the studies of dynamic response of materials at high strain rates is analyzed. For the wave propagation technique, the followings are important: the loading and unloading constitutive relation presumed, the positions of the sensors embedded, the interactions between loading waves and unloading waves. For the split Hopkinson pressure bar (SHPB) technique, the assumption of one-dimensional stress wave propagation and the assumption of stress uniformity along the specimen should be satisfied. When the larger diameter bars are employed, the wave dispersion effects should be considered, including the high frequency oscillations, non-uniform stress distribution across the bar section, increase of rise time, and amplitude attenuation. The stress uniformity along the specimen is influenced by the reflection times in specimen, the wave impedance ratio of the specimen and the bar, and the waveform.展开更多
According to the basic idea of dual-complementarity,in a simple and unified way proposed by the author,some basic principles in dynamic theory of elastic materials with voids can be established sys- tematically.In thi...According to the basic idea of dual-complementarity,in a simple and unified way proposed by the author,some basic principles in dynamic theory of elastic materials with voids can be established sys- tematically.In this paper, an important integral relation in terms of convolutions is given,which can be con- sidered as the generalized principle of virtual work in mechanics.Based on this relation,it is possible not on- ly to obtain the principle of virtual work and the reciprocal theorem in dynamic theory of elastic materials with voids,but also to derive systematically the complementary functionals for the eight-field,six-field, four-field and two-field simplified Gurtin-type variational principles.Furthermore,with this approach,the in- trinsic relationship among various principles can be explained clearly.展开更多
The paper discusses how the inventory control of army equipment material runs sytematically under the two-level maintenance system,and establishes the inventory control model based on system dynamics.On the basis of m...The paper discusses how the inventory control of army equipment material runs sytematically under the two-level maintenance system,and establishes the inventory control model based on system dynamics.On the basis of modeling and simulation,the influence of different inventory upper limit on the whole system is studied,and the optimal inventory control mechanism under the model condition is foud.In addition,through the simulation of two replenishment strategies(s,S) and(T,s,S),the advantages and disadvantages and feasibility of each replenishment strategy are analyzed.展开更多
An elastic-viscoplastic mechanics model is used to investigate asymptotically the mode Ⅲ dynamically propagating crack tip field in elastic-viscoplastic materials. The stress and strain fields at the crack tip posses...An elastic-viscoplastic mechanics model is used to investigate asymptotically the mode Ⅲ dynamically propagating crack tip field in elastic-viscoplastic materials. The stress and strain fields at the crack tip possess the same power-law singularity under a linear-hardening condition. The singularity exponent is uniquely determined by the viscosity coefficient of the material. Numerical results indicate that the motion parameter of the crack propagating speed has little effect on the zone structure at the crack tip. The hardening coefficient dominates the structure of the crack-tip field. However, the secondary plastic zone has little influence on the field. The viscosity of the material dominates the strength of stress and strain fields at the crack tip while it does have certain influence on the crack-tip field structure. The dynamic crack-tip field degenerates into the relevant quasi-static solution when the crack moving speed is zero. The corresponding perfectly-plastic solution is recovered from the linear-hardening solution when the hardening coefficient becomes zero.展开更多
Recently, quasimolecular dynamics has been successfully used to simulate the deformation characteristics of actual size solid materials. In quasimolecular dynamics, which is an attempt to bridge the gap between atomis...Recently, quasimolecular dynamics has been successfully used to simulate the deformation characteristics of actual size solid materials. In quasimolecular dynamics, which is an attempt to bridge the gap between atomistic and continuum simulations, molecules are aggregated into large units, called quasimolecules, to evaluate large scale material behavior. In this paper, a 2-dimensional numerical simulation using quasimolecular dynamics was performed to investigate laminar composite material fractures and crack propagation behavior in the uniform bending of laminar composite materials. It was verified that under bending deformation laminar composite materials deform quite differently from homogeneous materials展开更多
We investigate the rotational dynamics of a low-density sphere on the free surface of a vertically vibrated granular material（VGM）. The dynamical behavior of the sphere is influenced by the external energy input fro...We investigate the rotational dynamics of a low-density sphere on the free surface of a vertically vibrated granular material（VGM）. The dynamical behavior of the sphere is influenced by the external energy input from an electromagnetic shaker which is proportional to ε,where ε is equal to the ratio between the square of the dimensionless acceleration Γ and the square of the vibration frequency f of the container. Empirical results reveal that as the VGM transits from local-to-global convection,an increase in ε generally corresponds to an increase in the magnitudes of the rotational ω（RS） and translational v（CM） velocities of the sphere, an increase in the observed tilting angle θ（bed） of the VGM bed, and a decrease in the time t（wall） it takes the sphere to roll down the tilted VGM bed and hit the container wall. During unstable convection, an increase in ε results in a sharp decrease in the sphere＇s peak and mean ω（RS）,and a slight increase in t（wall）.For the range of ε values covered in this study, the sphere may execute persistent rotation, wobbling or jamming, depending on the vibration parameters and the resulting convective flow in the system.展开更多
In order to analyze and simulate the complex super-plastic forming process by computer, a method of equal height bulging for determining material parameters m and K of the superplastic alloy is presented. The formulae...In order to analyze and simulate the complex super-plastic forming process by computer, a method of equal height bulging for determining material parameters m and K of the superplastic alloy is presented. The formulae related to the method are deduced in this paper. The accuracy of the method is available for evaluating the examples used in simulating the superplastic sheet-metal bulging processes.展开更多
The crown is a key quality index of strip and plate, the rolling mill system is a complex nonlinear system, the strip qualities are directly affected by the dynamic characteristics of the rolling mil. At present, the ...The crown is a key quality index of strip and plate, the rolling mill system is a complex nonlinear system, the strip qualities are directly affected by the dynamic characteristics of the rolling mil. At present, the studies about the dynamic modeling of the rolling mill system mainly focus on the dynamic simulation for the strip thickness control system, the dynamic characteristics of the strip along the width direction and that of the rolls along axial direction are not considered. In order to study the dynamic changes of strip crown in the roiling process, the dynamic simulation model based on strip crown control is established. The work roll and backup roll are considered as elastic continuous bodies and the work roll and backup roll are joined by a Winkler elastic layer. The rolls are considered as double freely supported beams. The change rate of roll gap is taken into consideration in the metal deformation, based on the principle of dynamic conservation of material flow, the two dimensional dynamic model of metal is established. The model of metal deformation provides exciting force for the rolls dynamic model, and the roils dynamic model and metal deformation model couple together. Then, based on the two models, the dynamic model of rolling mill system based on strip crown control is established. The Newmark-13 method is used to solve the problem, and the dynamic changes of these parameters are obtained as follows： （1） The bending of work roll and backup roll changes with time; （2） The strip crown changes with time; （3） The distribution of rolling force changes with time. Take some cold tandem rolling mill as subject investigated, simulation results and the comparisons with experimental results show that the dynamic model built is rational and correct. The proposed research provides effective theory for optimization of device and technological parameters and development of new technology, plays an important role to improve the strip control precision and strip shape quality.展开更多
The dynamic stress-strain curves of 93% tungsten (W) alloy in the forged state at strain rates up to (5 000 s^(-1)) and in the temperature range from 223 K to 473 K were measured with the split Hopkinson pressure bar ...The dynamic stress-strain curves of 93% tungsten (W) alloy in the forged state at strain rates up to (5 000 s^(-1)) and in the temperature range from 223 K to 473 K were measured with the split Hopkinson pressure bar (SHPB) technique. Based on the above experimental data a dynamic constitutive equation considering the effects of strain rate, temperature and the special microstructure of such a kind of W-alloy was proposed. The numerical simulation for the experimental process with this constitutive equation was also carried out, the results show that the constitutive relationship constructed in this paper is very satisfactory for representing the dynamic responsive behavior of material..展开更多
Dynamic covalent chemistry has emerged recently to be a powerful tool to construct functional materials.This article reviews the progress in the research and development of dynamic covalent chemistry in gels assembled...Dynamic covalent chemistry has emerged recently to be a powerful tool to construct functional materials.This article reviews the progress in the research and development of dynamic covalent chemistry in gels assembled from small molecules.First dynamic covalent reactions used in gels are reviewed to understand the dynamic covalent bonding.Afterwards the catalogues of dynamic covalent gels are reviewed according to the nature of gelators and the interactions between gelators.Dynamic covalent bonding can be involved to form low molecular weight gelators.Low molecular weight molecules with multiple functional groups react to form dynamic covalent cross-linked polymers and act as gelators.Two catalogues of gels show different properties arising from their different structures.This review aims to illustrate the structure-property relationships of these dynamic covalent gels.展开更多
Attosecond light pulses have revolutionized the study of electron dynamics in materials by enabling the observation of ultrafast processes with unprecedented attosecond temporal resolution.They are primarily generated...Attosecond light pulses have revolutionized the study of electron dynamics in materials by enabling the observation of ultrafast processes with unprecedented attosecond temporal resolution.They are primarily generated through the process of high-order harmonic generation.This paper presents a comprehensive setup for attosecond pulse generation and measurement.Using a 900 nm,7 mJ,and 7 fs femtosecond laser with stabilized carrier-envelope phase,we employ polarization gating to generate a near single-cycle,linearly polarized pulse that interacts with neon gas to produce a broadband extreme-ultraviolet continuum with a cutoff photon energy of∼120 eV.The temporal and spectral characteristics of the generated single attosecond pulses are measured using an attosecond streak camera,and the pulse duration is determined to be 59 as through the frequency-resolved optical gating for complete reconstruction of attosecond bursts retrieval algorithm.As part of the Synergetic Extreme Condition User Facility,this setup will facilitate ultrafast research in transient absorption and photoelectron spectroscopy,providing global users with a powerful tool for studying electron dynamics in various materials.展开更多
X-ray free-electron lasers(XFELs)can generate bright X-ray pulses with short durations and narrow bandwidths,leading to extensive applica-tions in many disciplines such as biology,materials science,and ultrafast scien...X-ray free-electron lasers(XFELs)can generate bright X-ray pulses with short durations and narrow bandwidths,leading to extensive applica-tions in many disciplines such as biology,materials science,and ultrafast science.Recently,there has been a growing demand for X-ray pulses with high photon energy,especially from developments in“diffraction-before-destruction”applications and in dynamic mesoscale materials science.Here,we propose utilizing the electron beams at XFELs to drive a meter-scale two-bunch plasma wakefield accelerator and double the energy of the accelerated beam in a compact and inexpensive way.Particle-in-cell simulations are performed to study the beam quality degradation under different beam loading scenarios and nonideal issues,and the results show that more than half of the accelerated beam can meet the requirements of XFELs.After its transport to the undulator,the accelerated beam can improve the photon energy to 22 keV by a factor of around four while maintaining the peak power,thus offering a promising pathway toward high-photon-energy XFELs.展开更多
Dynamic fluorescent materials capable of stimulus-responsive emission modulation have emerged as pivotal components in next-generation information security systems.This study presents a novel photoresponsive fluoresce...Dynamic fluorescent materials capable of stimulus-responsive emission modulation have emerged as pivotal components in next-generation information security systems.This study presents a novel photoresponsive fluorescent composite system in which spiropyran(SP)was covalently grafted onto naphthalimide-functionalized silica aerogel matrices.These architectures exhibit reversible fluorescence resonance energy transfer between the naphthalimide donors and merocyanine-form of SP acceptors under ultraviolet irradiation,enabling dynamic emission shifting from green(blue)to red.The aggregation-induced emission characteristics of SP were used to engineer a smart material system that can reversibly regulate its distinct red fluorescence by precisely controlling the dispersion of amino groups on naphthalimide-functionalized silica aerogels.This spatial manipulation directly governs the molecular packing state of SP,enabling dynamic fluorescence modulation.A programmable control over the fluorescence chromatic transitions in the composite material was achieved by systematically adjusting the SP grafting densities(1%,2%,and 3%w/w).A unique mode of dynamic information encryption technology was developed by utilizing dynamic fluorescence variations.These materials can substantially enhance information encryption levels due to their precisely adjustable fluorescence properties in response to external stimuli over time.This makes the encryption process even more unpredictable and complex,thereby exponentially increasing the difficulty for unauthorized parties to replicate or decode the encrypted information.展开更多
Supramolecular polymer networks(SPNs)are celebrated for their dynamic nature,yet they often exhibit inadequate mechanical properties.Thus far,the quest to bolster the mechanical resilience of SPNs while preserving the...Supramolecular polymer networks(SPNs)are celebrated for their dynamic nature,yet they often exhibit inadequate mechanical properties.Thus far,the quest to bolster the mechanical resilience of SPNs while preserving their dynamic character presents a formidable challenge.Herein,we introduce[2]rotaxane into SPN to serve as another cross-link,which could effectively enhance the mechanical robustness of the polymer network without losing the dynamic properties.Compared with SPN,the dually cross-linked network(DPN)demonstrates superior breaking strength,Young’s modulus,puncture force and toughness,underscoring its superior robustness.Furthermore,the cyclic tensile tests reveal that the energy dissipation capacity of DPN rivals,and in some cases surpasses,that of SPN,owing to the efficient energy dissipation pathway facilitated by[2]rotaxane.In addition,benefiting from stable topological structure of[2]rotaxane,DPN exhibits accelerated recovery from deformation,indicating superior elasticity compared to SPN.This strategy elevates the performance of SPNs across multiple metrics,presenting a promising avenue for the development of high-performance dynamic materials.展开更多
To minimize the environmental pollution caused by polymeric waste,materials based dynamic chemistry have attracted extensive attention around the world.Various dynamic covalent bonds or noncovalent interactions have b...To minimize the environmental pollution caused by polymeric waste,materials based dynamic chemistry have attracted extensive attention around the world.Various dynamic covalent bonds or noncovalent interactions have been employed to design multifunctional polymers with recyclability,reprocessablility,and sustainability.Among them,polymers based on reversible boron–oxygen(B–O)bonds have been widely investigated because of their unique properties.Particularly,lots of scientists have demonstrated that the combination with boron–nitrogen(B–N)coordination can effectively accelerate the dynamicity as well as enhance the stability of B–O bonds.Therefore,numerous polymers containing dynamic B–O bonds with dative B–N coordination have been designed and synthesized in recent years.These polymers exhibit excellent versatility and great potential for diverse applications such as biosensors,battery electrolytes,and artificial skins.This review provides an overview of the comprehensive influence of dynamic B–N coordination chemistry on B–O bonds in organoboron species and highlights the developments in the area of constructing boron‐containing polymeric materials with this interesting linkage.The design guidelines,existing challenges,and future perspectives in this burgeoning field are discussed and proposed.展开更多
Static and dynamic compression tests were carried out on mortar and paste specimens of three sizes（Ф68 mm×32 mm,Ф59 mm×29.5 mm and Ф32 mm×16 mm）to study the influence of specimen size on the compre...Static and dynamic compression tests were carried out on mortar and paste specimens of three sizes（Ф68 mm×32 mm,Ф59 mm×29.5 mm and Ф32 mm×16 mm）to study the influence of specimen size on the compression behavior of cement-based materials under high strain rates.The static tests were applied using a universalservo-hydraulic system,and the dynamic tests were applied by a spilt Hopkinson pressure bar（SHPB）system.The experimentalresults show that for mortar and paste specimens,the dynamic compressive strength is greater than the quasi-static one,and the dynamic compressive strength for specimens of large size is lower than those of smallsize.However,the dynamic increase factors（DIF）has an opposite trend.Obviously,both strain rate and size effect exist in mortar and paste.The test results were then analyzed using Weibull,Carpinteriand Ba？ant＇s size effect laws.A good agreement between these three laws and the test results was reached on the compressive strength.However,for the experimentalresults of paste and cement mortar,the size effect is not evident for the peak strain and elastic modulus of paste and cement mortar.展开更多
Strain-rate sensitivities of 55vol%-65vol% aluminum 2024-T6/TiB2 composites and the corresponding aluminum 2024-T6 matrix were investigated using split Hopkinson pressure bar method. The experimental results showed th...Strain-rate sensitivities of 55vol%-65vol% aluminum 2024-T6/TiB2 composites and the corresponding aluminum 2024-T6 matrix were investigated using split Hopkinson pressure bar method. The experimental results showed that 55vol%-65vol% aluminum 2024-T6/TiB2 composites exhibited significant strain-rate sensitivities, which were three times higher than the strain-rate sensitivity of the aluminum 2024-T6 matrix. The strain-rate sensitivity of the aluminum 2024-T6 matrix composites rose obviously with increasing reinforcement content（up to 60%）, which agreed with that from the previous researches. But it decreased as the ceramic reinforcement content reached 65%. After high strain rates compression, a large number of dislocations and micro-cracks were found inside the matrix and the Ti B2 particles, respectively. These micro-cracks can accelerate the brittle fracture of the composites. The aluminum 2024-T6/Ti B2 composites showed various fracture characteristics and shear instability was the predominant failure mechanism under dynamic loading.展开更多
基金the National Natural Science Foundation of China(No.52174359)the Key Research and Development Projects of Anhui Province(No.201904a05020068)。
文摘The flow stress behavior of GH4033 superalloy was determined by the hot compression tests at the temperatures of 1223-1473 K and the total strains of 0.6 with the strain rates of 0.001-30.0 s^(-1) by using cylindrical samples.The processing maps based on the dynamic material model(DMM)combined with the corresponding microstructure observations indicate the reasonable processing domain locating at the strain rates of 0.1-1.0 s^(-1) and the deformation temperature of 1273-1423 K.Meanwhile,the numerical simulation based on finite element model(FEM)described the variation of the effective strain,effective strain rate and the temperature for the core node,and unveiled the influence of the hot rolling parameters considering the initial temperature(T_(0))range of 1223-1473 K and the first-stand biting velocity(v_(0))range of 0.15-0.35 m·s^(-1).Furthermore,the deformation stability of GH4033 superalloy in the round rod hot continuous rolling(HCR)process is described and analyzed by coupling the three-dimensional(3-D)processing map,and the spatial trajectory lines were determined by the numerically simulated temperatures,the strains and the strain rates.Finally,the results show that the hot deformation stability of GH4033 can be achieved by the rolling process parameters located at T_(0)=1423 K and v_(0)=0.25 m·s^(-1).Additionally,the practical HCR processes as T_(0)=1423 K and v_(0)=0.15,0.25,0.35 m·s^(-1) were operated to verify the influence of the hot rolling parameters on the hot deformation stability by the microstructure observation of the final products.
文摘1 Results Supramolecular chemistry is actively exploring systems undergoing self-organization.The design of molecular information controlled,"programmed"and functional self-organizing systems provides an original approach to nanoscience and nanotechnology.The spontaneous but controlled generation of well-defined,functional molecular and supramolecular architectures of nanometric size through self-organization represents a means of performing programmed engineering and processing of functional nanostruct...
文摘How the wave propagation analysis plays a key role in the studies of dynamic response of materials at high strain rates is analyzed. For the wave propagation technique, the followings are important: the loading and unloading constitutive relation presumed, the positions of the sensors embedded, the interactions between loading waves and unloading waves. For the split Hopkinson pressure bar (SHPB) technique, the assumption of one-dimensional stress wave propagation and the assumption of stress uniformity along the specimen should be satisfied. When the larger diameter bars are employed, the wave dispersion effects should be considered, including the high frequency oscillations, non-uniform stress distribution across the bar section, increase of rise time, and amplitude attenuation. The stress uniformity along the specimen is influenced by the reflection times in specimen, the wave impedance ratio of the specimen and the bar, and the waveform.
基金The project supported by the Foundation of Zhongshan University Advanced Research Center
文摘According to the basic idea of dual-complementarity,in a simple and unified way proposed by the author,some basic principles in dynamic theory of elastic materials with voids can be established sys- tematically.In this paper, an important integral relation in terms of convolutions is given,which can be con- sidered as the generalized principle of virtual work in mechanics.Based on this relation,it is possible not on- ly to obtain the principle of virtual work and the reciprocal theorem in dynamic theory of elastic materials with voids,but also to derive systematically the complementary functionals for the eight-field,six-field, four-field and two-field simplified Gurtin-type variational principles.Furthermore,with this approach,the in- trinsic relationship among various principles can be explained clearly.
文摘The paper discusses how the inventory control of army equipment material runs sytematically under the two-level maintenance system,and establishes the inventory control model based on system dynamics.On the basis of modeling and simulation,the influence of different inventory upper limit on the whole system is studied,and the optimal inventory control mechanism under the model condition is foud.In addition,through the simulation of two replenishment strategies(s,S) and(T,s,S),the advantages and disadvantages and feasibility of each replenishment strategy are analyzed.
文摘An elastic-viscoplastic mechanics model is used to investigate asymptotically the mode Ⅲ dynamically propagating crack tip field in elastic-viscoplastic materials. The stress and strain fields at the crack tip possess the same power-law singularity under a linear-hardening condition. The singularity exponent is uniquely determined by the viscosity coefficient of the material. Numerical results indicate that the motion parameter of the crack propagating speed has little effect on the zone structure at the crack tip. The hardening coefficient dominates the structure of the crack-tip field. However, the secondary plastic zone has little influence on the field. The viscosity of the material dominates the strength of stress and strain fields at the crack tip while it does have certain influence on the crack-tip field structure. The dynamic crack-tip field degenerates into the relevant quasi-static solution when the crack moving speed is zero. The corresponding perfectly-plastic solution is recovered from the linear-hardening solution when the hardening coefficient becomes zero.
文摘Recently, quasimolecular dynamics has been successfully used to simulate the deformation characteristics of actual size solid materials. In quasimolecular dynamics, which is an attempt to bridge the gap between atomistic and continuum simulations, molecules are aggregated into large units, called quasimolecules, to evaluate large scale material behavior. In this paper, a 2-dimensional numerical simulation using quasimolecular dynamics was performed to investigate laminar composite material fractures and crack propagation behavior in the uniform bending of laminar composite materials. It was verified that under bending deformation laminar composite materials deform quite differently from homogeneous materials
基金Supported by the CHED-FDP II Program of the Commission on Higher Education of the Philippines
文摘We investigate the rotational dynamics of a low-density sphere on the free surface of a vertically vibrated granular material（VGM）. The dynamical behavior of the sphere is influenced by the external energy input from an electromagnetic shaker which is proportional to ε,where ε is equal to the ratio between the square of the dimensionless acceleration Γ and the square of the vibration frequency f of the container. Empirical results reveal that as the VGM transits from local-to-global convection,an increase in ε generally corresponds to an increase in the magnitudes of the rotational ω（RS） and translational v（CM） velocities of the sphere, an increase in the observed tilting angle θ（bed） of the VGM bed, and a decrease in the time t（wall） it takes the sphere to roll down the tilted VGM bed and hit the container wall. During unstable convection, an increase in ε results in a sharp decrease in the sphere＇s peak and mean ω（RS）,and a slight increase in t（wall）.For the range of ε values covered in this study, the sphere may execute persistent rotation, wobbling or jamming, depending on the vibration parameters and the resulting convective flow in the system.
文摘In order to analyze and simulate the complex super-plastic forming process by computer, a method of equal height bulging for determining material parameters m and K of the superplastic alloy is presented. The formulae related to the method are deduced in this paper. The accuracy of the method is available for evaluating the examples used in simulating the superplastic sheet-metal bulging processes.
基金supported by Hebei Provincial Natural Science Foundation of China (Grant No. E2012203177)National Science and Technology Support Plan of China (Grant No. 2011BAF15B01)+1 种基金Hebei Provincial Funds for Distinguished Young Scientists of China (Grant No.E2006001038)Open Project Program of National Engineering Research Center for Equipment and Technology of Cold Strip Rolling(Grant No. NECSR-201202)
文摘The crown is a key quality index of strip and plate, the rolling mill system is a complex nonlinear system, the strip qualities are directly affected by the dynamic characteristics of the rolling mil. At present, the studies about the dynamic modeling of the rolling mill system mainly focus on the dynamic simulation for the strip thickness control system, the dynamic characteristics of the strip along the width direction and that of the rolls along axial direction are not considered. In order to study the dynamic changes of strip crown in the roiling process, the dynamic simulation model based on strip crown control is established. The work roll and backup roll are considered as elastic continuous bodies and the work roll and backup roll are joined by a Winkler elastic layer. The rolls are considered as double freely supported beams. The change rate of roll gap is taken into consideration in the metal deformation, based on the principle of dynamic conservation of material flow, the two dimensional dynamic model of metal is established. The model of metal deformation provides exciting force for the rolls dynamic model, and the roils dynamic model and metal deformation model couple together. Then, based on the two models, the dynamic model of rolling mill system based on strip crown control is established. The Newmark-13 method is used to solve the problem, and the dynamic changes of these parameters are obtained as follows： （1） The bending of work roll and backup roll changes with time; （2） The strip crown changes with time; （3） The distribution of rolling force changes with time. Take some cold tandem rolling mill as subject investigated, simulation results and the comparisons with experimental results show that the dynamic model built is rational and correct. The proposed research provides effective theory for optimization of device and technological parameters and development of new technology, plays an important role to improve the strip control precision and strip shape quality.
文摘The dynamic stress-strain curves of 93% tungsten (W) alloy in the forged state at strain rates up to (5 000 s^(-1)) and in the temperature range from 223 K to 473 K were measured with the split Hopkinson pressure bar (SHPB) technique. Based on the above experimental data a dynamic constitutive equation considering the effects of strain rate, temperature and the special microstructure of such a kind of W-alloy was proposed. The numerical simulation for the experimental process with this constitutive equation was also carried out, the results show that the constitutive relationship constructed in this paper is very satisfactory for representing the dynamic responsive behavior of material..
基金the NSFC(Nos.51573216 and 21273007)the Program for New Century Excellent Talents in University(No.NCET-13-0615)the FRF for the Central Universities(No.16lgjc66)for support
文摘Dynamic covalent chemistry has emerged recently to be a powerful tool to construct functional materials.This article reviews the progress in the research and development of dynamic covalent chemistry in gels assembled from small molecules.First dynamic covalent reactions used in gels are reviewed to understand the dynamic covalent bonding.Afterwards the catalogues of dynamic covalent gels are reviewed according to the nature of gelators and the interactions between gelators.Dynamic covalent bonding can be involved to form low molecular weight gelators.Low molecular weight molecules with multiple functional groups react to form dynamic covalent cross-linked polymers and act as gelators.Two catalogues of gels show different properties arising from their different structures.This review aims to illustrate the structure-property relationships of these dynamic covalent gels.
基金supported by the National Natural Science Foundation of China(Grant Nos.12174435,12034020,and 92250303)the Chinese Academy of Sciences Project for Young Scientists in Basic Research(Grant No.YSBR-091)the National Key R&D Program of China(Grant No.2022YFA1604200).
文摘Attosecond light pulses have revolutionized the study of electron dynamics in materials by enabling the observation of ultrafast processes with unprecedented attosecond temporal resolution.They are primarily generated through the process of high-order harmonic generation.This paper presents a comprehensive setup for attosecond pulse generation and measurement.Using a 900 nm,7 mJ,and 7 fs femtosecond laser with stabilized carrier-envelope phase,we employ polarization gating to generate a near single-cycle,linearly polarized pulse that interacts with neon gas to produce a broadband extreme-ultraviolet continuum with a cutoff photon energy of∼120 eV.The temporal and spectral characteristics of the generated single attosecond pulses are measured using an attosecond streak camera,and the pulse duration is determined to be 59 as through the frequency-resolved optical gating for complete reconstruction of attosecond bursts retrieval algorithm.As part of the Synergetic Extreme Condition User Facility,this setup will facilitate ultrafast research in transient absorption and photoelectron spectroscopy,providing global users with a powerful tool for studying electron dynamics in various materials.
基金supported by the National Grand Instrument Project No. SQ2019YFF01014400the Natural Science Foundation of China (Grant Nos. 12375147, 12435011, 12075030)+2 种基金the Beijing Outstanding Young Scientist Project, Project for Young Scientists in Basic Research of Chinese Academy of Sciences (YSBR-115)the Beijing Normal University Scientific Research Initiation Fund for Introducing Talents No. 310432104the Fundamental Research Funds for the Central Universities, Peking University
文摘X-ray free-electron lasers(XFELs)can generate bright X-ray pulses with short durations and narrow bandwidths,leading to extensive applica-tions in many disciplines such as biology,materials science,and ultrafast science.Recently,there has been a growing demand for X-ray pulses with high photon energy,especially from developments in“diffraction-before-destruction”applications and in dynamic mesoscale materials science.Here,we propose utilizing the electron beams at XFELs to drive a meter-scale two-bunch plasma wakefield accelerator and double the energy of the accelerated beam in a compact and inexpensive way.Particle-in-cell simulations are performed to study the beam quality degradation under different beam loading scenarios and nonideal issues,and the results show that more than half of the accelerated beam can meet the requirements of XFELs.After its transport to the undulator,the accelerated beam can improve the photon energy to 22 keV by a factor of around four while maintaining the peak power,thus offering a promising pathway toward high-photon-energy XFELs.
基金supported by the Zhejiang Sci-Tech University Shengzhou Innovation Research Institute(SYY2.023C000005)the National Natural Science Foundation of China(51803184)。
文摘Dynamic fluorescent materials capable of stimulus-responsive emission modulation have emerged as pivotal components in next-generation information security systems.This study presents a novel photoresponsive fluorescent composite system in which spiropyran(SP)was covalently grafted onto naphthalimide-functionalized silica aerogel matrices.These architectures exhibit reversible fluorescence resonance energy transfer between the naphthalimide donors and merocyanine-form of SP acceptors under ultraviolet irradiation,enabling dynamic emission shifting from green(blue)to red.The aggregation-induced emission characteristics of SP were used to engineer a smart material system that can reversibly regulate its distinct red fluorescence by precisely controlling the dispersion of amino groups on naphthalimide-functionalized silica aerogels.This spatial manipulation directly governs the molecular packing state of SP,enabling dynamic fluorescence modulation.A programmable control over the fluorescence chromatic transitions in the composite material was achieved by systematically adjusting the SP grafting densities(1%,2%,and 3%w/w).A unique mode of dynamic information encryption technology was developed by utilizing dynamic fluorescence variations.These materials can substantially enhance information encryption levels due to their precisely adjustable fluorescence properties in response to external stimuli over time.This makes the encryption process even more unpredictable and complex,thereby exponentially increasing the difficulty for unauthorized parties to replicate or decode the encrypted information.
基金support from the National Natural Science Foundation of China(Nos.22122105 and22071152)Natural Science Foundation of Shanghai(No.22dz1207603)+4 种基金the Shuguang Program of Shanghai Education Development Foundation and the Shanghai Municipal Education Commission(No.22SG11)the Starry Night Science Fund of Zhejiang University Shanghai Institute for Advanced Study(No.SN-ZJU-SIAS-006)L.Y.acknowledges the financial support from the National Natural Science Foundation of China(No.22305150)Z.Z.acknowledges the financial support from the National Natural Science Foundation of China(Nos.22101175 and 52333001)supported by State Key Laboratory of Polyolefins and Catalysis and Shanghai Key Laboratory of Catalysis Technology for Polyolefins(No.SKL-LCTP-202301)。
文摘Supramolecular polymer networks(SPNs)are celebrated for their dynamic nature,yet they often exhibit inadequate mechanical properties.Thus far,the quest to bolster the mechanical resilience of SPNs while preserving their dynamic character presents a formidable challenge.Herein,we introduce[2]rotaxane into SPN to serve as another cross-link,which could effectively enhance the mechanical robustness of the polymer network without losing the dynamic properties.Compared with SPN,the dually cross-linked network(DPN)demonstrates superior breaking strength,Young’s modulus,puncture force and toughness,underscoring its superior robustness.Furthermore,the cyclic tensile tests reveal that the energy dissipation capacity of DPN rivals,and in some cases surpasses,that of SPN,owing to the efficient energy dissipation pathway facilitated by[2]rotaxane.In addition,benefiting from stable topological structure of[2]rotaxane,DPN exhibits accelerated recovery from deformation,indicating superior elasticity compared to SPN.This strategy elevates the performance of SPNs across multiple metrics,presenting a promising avenue for the development of high-performance dynamic materials.
基金National Natural Science Foundation of China,Grant/Award Numbers:21631006,21771100,22271139Central University Basic Research Fund of China,Grant/Award Number:020514380281。
文摘To minimize the environmental pollution caused by polymeric waste,materials based dynamic chemistry have attracted extensive attention around the world.Various dynamic covalent bonds or noncovalent interactions have been employed to design multifunctional polymers with recyclability,reprocessablility,and sustainability.Among them,polymers based on reversible boron–oxygen(B–O)bonds have been widely investigated because of their unique properties.Particularly,lots of scientists have demonstrated that the combination with boron–nitrogen(B–N)coordination can effectively accelerate the dynamicity as well as enhance the stability of B–O bonds.Therefore,numerous polymers containing dynamic B–O bonds with dative B–N coordination have been designed and synthesized in recent years.These polymers exhibit excellent versatility and great potential for diverse applications such as biosensors,battery electrolytes,and artificial skins.This review provides an overview of the comprehensive influence of dynamic B–N coordination chemistry on B–O bonds in organoboron species and highlights the developments in the area of constructing boron‐containing polymeric materials with this interesting linkage.The design guidelines,existing challenges,and future perspectives in this burgeoning field are discussed and proposed.
基金Funded by the National Natural Science Foundation of China(No.51509078)the Natural Science Foundation of Jiangsu Province(No.BK20150820)
文摘Static and dynamic compression tests were carried out on mortar and paste specimens of three sizes（Ф68 mm×32 mm,Ф59 mm×29.5 mm and Ф32 mm×16 mm）to study the influence of specimen size on the compression behavior of cement-based materials under high strain rates.The static tests were applied using a universalservo-hydraulic system,and the dynamic tests were applied by a spilt Hopkinson pressure bar（SHPB）system.The experimentalresults show that for mortar and paste specimens,the dynamic compressive strength is greater than the quasi-static one,and the dynamic compressive strength for specimens of large size is lower than those of smallsize.However,the dynamic increase factors（DIF）has an opposite trend.Obviously,both strain rate and size effect exist in mortar and paste.The test results were then analyzed using Weibull,Carpinteriand Ba？ant＇s size effect laws.A good agreement between these three laws and the test results was reached on the compressive strength.However,for the experimentalresults of paste and cement mortar,the size effect is not evident for the peak strain and elastic modulus of paste and cement mortar.
基金Funded in part by the Fundamental Research Funds for the Central Universities,SCUT(2013ZZ014)the Natural Science Foundation of Guangdong Province(No.S2013010013269)+1 种基金the Doctoral Program Foundation of Institutions of Higher Education of China(No.20130172120027)the National Engineering Research Center Open Fund of SCUT(2011007B)
文摘Strain-rate sensitivities of 55vol%-65vol% aluminum 2024-T6/TiB2 composites and the corresponding aluminum 2024-T6 matrix were investigated using split Hopkinson pressure bar method. The experimental results showed that 55vol%-65vol% aluminum 2024-T6/TiB2 composites exhibited significant strain-rate sensitivities, which were three times higher than the strain-rate sensitivity of the aluminum 2024-T6 matrix. The strain-rate sensitivity of the aluminum 2024-T6 matrix composites rose obviously with increasing reinforcement content（up to 60%）, which agreed with that from the previous researches. But it decreased as the ceramic reinforcement content reached 65%. After high strain rates compression, a large number of dislocations and micro-cracks were found inside the matrix and the Ti B2 particles, respectively. These micro-cracks can accelerate the brittle fracture of the composites. The aluminum 2024-T6/Ti B2 composites showed various fracture characteristics and shear instability was the predominant failure mechanism under dynamic loading.
