Dynamic melt modification of polyethylene via the direct grafting of peroxide fragments shows promise for the development of processable functionalized materials.In this study,four linear low-density polyethylenes(LLD...Dynamic melt modification of polyethylene via the direct grafting of peroxide fragments shows promise for the development of processable functionalized materials.In this study,four linear low-density polyethylenes(LLDPEs)with comparable molecular weights but different short-chain branch(SCB)contents(ranging of 5-66 per 1000 carbon atoms)were modified via dynamic melt mixing using 2 wt% benzoyl peroxide at 145℃ and 50 r/min for 30 min.The influence of SCB content on the processability and structure of the resulting products was systematically investigated.All modified products exhibited good melt processability with melt flow rates(MFR)ranging from 0.46 g/10min to 1.07 g/10min.Products derived from low-SCB LLDPEs showed a lower MFR,higher cross-linking content,a larger number of long-chain branches,and a higher degree of benzoyl grafting.In contrast,those produced from high-SCB LLDPEs exhibited improved processability,reduced cross-linking,fewer long-chain branches,and lower benzoyl grafting levels.A detailed structural investigation of the soluble and insoluble fractions,which were separated using trichlorobenzene fractionation,was conducted to analyze the structural features of various modified products and demonstrate that the SCB content(i.e.,tertiary carbon density)significantly influences radical coupling during dynamic modification.Elevated tertiary carbon density,by introducing greater steric hindrance,suppresses radical coupling during dynamic modification,thereby reducing the efficiency of both crosslinking and peroxide fragment grafting.These findings provide new insights into the structure-reactivity relationships in peroxide-induced polyethylene modification and lay the foundation for tailoring material properties via dynamic processing.展开更多
With the increasing complexity of industrial automation,planetary gearboxes play a vital role in largescale equipment transmission systems,directly impacting operational efficiency and safety.Traditional maintenance s...With the increasing complexity of industrial automation,planetary gearboxes play a vital role in largescale equipment transmission systems,directly impacting operational efficiency and safety.Traditional maintenance strategies often struggle to accurately predict the degradation process of equipment,leading to excessive maintenance costs or potential failure risks.However,existing prediction methods based on statistical models are difficult to adapt to nonlinear degradation processes.To address these challenges,this study proposes a novel condition-based maintenance framework for planetary gearboxes.A comprehensive full-lifecycle degradation experiment was conducted to collect raw vibration signals,which were then processed using a temporal convolutional network autoencoder with multi-scale perception capability to extract deep temporal degradation features,enabling the collaborative extraction of longperiod meshing frequencies and short-term impact features from the vibration signals.Kernel principal component analysis was employed to fuse and normalize these features,enhancing the characterization of degradation progression.A nonlinear Wiener process was used to model the degradation trajectory,with a threshold decay function introduced to dynamically adjust maintenance strategies,and model parameters optimized through maximum likelihood estimation.Meanwhile,the maintenance strategy was optimized to minimize costs per unit time,determining the optimal maintenance timing and preventive maintenance threshold.The comprehensive indicator of degradation trends extracted by this method reaches 0.756,which is 41.2%higher than that of traditional time-domain features;the dynamic threshold strategy reduces the maintenance cost per unit time to 55.56,which is 8.9%better than that of the static threshold optimization.Experimental results demonstrate significant reductions in maintenance costs while enhancing system reliability and safety.This study realizes the organic integration of deep learning and reliability theory in the maintenance of planetary gearboxes,provides an interpretable solution for the predictive maintenance of complex mechanical systems,and promotes the development of condition-based maintenance strategies for planetary gearboxes.展开更多
During the hoisting process of the offshore substation,changes in the hoisting speed can affect the hoisting system.Therefore,this study set four different speed conditions for the lifting and lowering stages of the i...During the hoisting process of the offshore substation,changes in the hoisting speed can affect the hoisting system.Therefore,this study set four different speed conditions for the lifting and lowering stages of the installation process,and studied the impact of different lifting and lowering speeds on the hoisting system under the same environmental conditions through numerical simulation.The results show that during the lifting operation,as the lifting speed increases,the swing motion of the substation and the installation vessel tends to decrease,and the faster the hoisting speed,the more obvious the swing suppression of the substation and the installation vessel,and the smaller the fluctuation in the tension amplitude of the slings and mooring lines.In contrast,during the lowering operation,as the lowering speed increases,the swing motion of the substation and the installation vessel tends to increase,and the faster the lowering speed,the more obvious the swing amplification effect of the substation and the installation vessel.Therefore,during hoisting operations,increasing the lifting speed and reducing the lowering speed can mitigate the motion performance of the hoisting coupling system,reduce the tension amplitude variation of the sling and mooring,and ensure the smooth progress of the hoisting operation.展开更多
Electrocatalytic oxidation is a promising technology for wastewater treatment,but poor mass transfer and low current efficiency impaded its engineering applications.To address these issues,researchers have developed f...Electrocatalytic oxidation is a promising technology for wastewater treatment,but poor mass transfer and low current efficiency impaded its engineering applications.To address these issues,researchers have developed flow-through electrochemical reactors(FERs)primarily based on porous electrodes,where the pore structure significantly impacts the electrochemical reaction.Therefore,this study systematically investigated the impact of different pore sizes on the fluid dynamics,current potential distribution,mass transfer processes,and degradation performance of FERs.Computational Fluid Dynamics(CFD)results indicated that smaller pore sizes(10μm,30μm,and 60μm)significantly enhanced convective effects within the fluid,reduced short fluid paths and dead volume regions within the microchannels,and facilitated mass transfer processes.Additionally,smaller pore sizes were conducive to a uniform distribution of current density.Furthermore,Fe(CN)_(6)^(4−)oxidation experiments revealed that the current density at a pore size of 160μm was notably lower than that at 10μm,indicating slower mass transfer of Fe(CN)_(6)^(4−)within larger channels.Calculations based on experimental results demonstrated that the mass transfer rate at a pore size of 10μm was six times than that at 160μm,further confirming the enhancing effect of smaller pore sizes on the mass transfer process.Lastly,experiments on tetracycline degradation showed that at a residence time of 90 s,the removal efficiencies of tetracycline were 80%and 39.1%for porous electrodes with pore sizes of 10μm and 160μm,respectively,demonstrating the superior removal efficiency of smaller pore sizes for tetracycline degradation.展开更多
A model for dynamic frictionless contact between a viscoelastic body and foundation is considered.The viscoelastic constitutive law is assumed to be nonlinear and the contact is modelled with the normal compliance con...A model for dynamic frictionless contact between a viscoelastic body and foundation is considered.The viscoelastic constitutive law is assumed to be nonlinear and the contact is modelled with the normal compliance condition.We obtain the well-posedness using nonlinear semigroup theory arguments.Moreover,the exponential stability result of the solution is shown by using the energy method to produce a suitable Lyapunov function.展开更多
Strong long-wavelength laser pulses enable direct manipulation of atomic lattices for engineering novel quantum states in complex materials.Nonlinear coupling between two infrared-active phonon modes(TO_(1) and TO_(2)...Strong long-wavelength laser pulses enable direct manipulation of atomic lattices for engineering novel quantum states in complex materials.Nonlinear coupling between two infrared-active phonon modes(TO_(1) and TO_(2)),induced by intense terahertz light fields,significantly enhances the amplitude of the TO_(1) mode and facilitates ultrafast control of transient structural distortions.This light-induced distortion reduces the lattice thermal conductivity from 8.1 W·m^(-1)·K^(-1)to 3.0 W·m^(-1)·K^(-1).The reduction originates from the nonlinear coupling,which enhances anharmonic interactions in the lattice potential energy and substantially shortens the phonon lifetime(τ).This work demonstrates a strategy applicable to other perovskite materials and provides a framework for investigating light-induced electrical,optical,and thermodynamic phase transitions.展开更多
Based on an analysis of the role of industrial control and optimization technologies in the Industrial Revolution,as well as the current situation and existing problems of operational decision-making(ODM)for industria...Based on an analysis of the role of industrial control and optimization technologies in the Industrial Revolution,as well as the current situation and existing problems of operational decision-making(ODM)for industrial process,this paper introduces the concept of intelligent ODM in industrial process,shapes its future directions,and highlights key technical challenges.By the tight conjoining of and coordination between industrial artificial intelligence(AI)with industrial control and optimization technologies,as well as the Industrial Internet with industrial computer management and control systems,an intelligent operational optimization decision-making methodology is proposed for complex industrial process.The intelligent ODM methodology and its successful application demonstrate that the tight conjoining of and coordination between next-generation information technologies with industrial control and optimization technologies will promote the development of industrial intelligent ODM.Finally,main research directions and ideas are outlined for realizing intelligent ODM in industrial process.展开更多
Data-driven process monitoring is an effective approach to assure safe operation of modern manufacturing and energy systems,such as thermal power plants being studied in this work.Industrial processes are inherently d...Data-driven process monitoring is an effective approach to assure safe operation of modern manufacturing and energy systems,such as thermal power plants being studied in this work.Industrial processes are inherently dynamic and need to be monitored using dynamic algorithms.Mainstream dynamic algorithms rely on concatenating current measurement with past data.This work proposes a new,alternative dynamic process monitoring algorithm,using dot product feature analysis(DPFA).DPFA computes the dot product of consecutive samples,thus naturally capturing the process dynamics through temporal correlation.At the same time,DPFA's online computational complexity is lower than not just existing dynamic algorithms,but also classical static algorithms(e.g.,principal component analysis and slow feature analysis).The detectability of the new algorithm is analyzed for three types of faults typically seen in process systems:sensor bias,process fault and gain change fault.Through experiments with a numerical example and real data from a thermal power plant,the DPFA algorithm is shown to be superior to the state-of-the-art methods,in terms of better monitoring performance(fault detection rate and false alarm rate)and lower computational complexity.展开更多
The manner and conditions of running the decision-making system with self-defense electronic jamming are given. After proposing the scenario of applying discrete dynamic Bayesian network to the decision making with se...The manner and conditions of running the decision-making system with self-defense electronic jamming are given. After proposing the scenario of applying discrete dynamic Bayesian network to the decision making with self-defense electronic jamming, a decision-making model with self-defense electronic jamming based on the discrete dynamic Bayesian network is established. Then jamming decision inferences by the aid of the algorithm of discrete dynamic Bayesian network are carried on. The simulating result shows that this method is able to synthesize different targets which are not predominant. In this way, various features at the same time, as well as the same feature appearing at different time complement mutually; in addition, the accuracy and reliability of electronic jamming decision making are enhanced significantly.展开更多
Under the paradigm of Industry 5.0,intelligent manufacturing transcends mere efficiency enhancement by emphasizing human-machine collaboration,where human expertise plays a central role in assembly processes.Despite a...Under the paradigm of Industry 5.0,intelligent manufacturing transcends mere efficiency enhancement by emphasizing human-machine collaboration,where human expertise plays a central role in assembly processes.Despite advancements in intelligent and digital technologies,assembly process design still heavily relies on manual knowledge reuse,and inefficiencies and inconsistent quality in process documentation are caused.To address the aforementioned issues,this paper proposes a knowledge push method of complex product assembly process design based on distillation model-based dynamically enhanced graph and Bayesian network.First,an initial knowledge graph is constructed using a BERT-BiLSTM-CRF model trained with integrated human expertise and a fine-tuned large language model.Then,a confidence-based dynamic weighted fusion strategy is employed to achieve dynamic incremental construction of the knowledge graph with low resource consumption.Subsequently,a Bayesian network model is constructed based on the relationships between assembly components,assembly features,and operations.Bayesian network reasoning is used to push assembly process knowledge under different design requirements.Finally,the feasibility of the Bayesian network construction method and the effectiveness of Bayesian network reasoning are verified through a specific example,significantly improving the utilization of assembly process knowledge and the efficiency of assembly process design.展开更多
Based on service-oriented architecture（SOA）,a Bellman-dynamic-programming-based approach of service recovery decision-making is proposed to make valid recovery decisions.Both the attribute and the process of service...Based on service-oriented architecture（SOA）,a Bellman-dynamic-programming-based approach of service recovery decision-making is proposed to make valid recovery decisions.Both the attribute and the process of services in the controllable distributed information system are analyzed as the preparatory work.Using the idea of service composition as a reference,the approach translates the recovery decision-making into a planning problem regarding artificial intelligence （AI） through two steps.The first is the self-organization based on a logical view of the network,and the second is the definition of evaluation standards.Applying Bellman dynamic programming to solve the planning problem,the approach offers timely emergency response and optimal recovery source selection,meeting multiple QoS （quality of service）requirements.Experimental results demonstrate the rationality and optimality of the approach,and the theoretical analysis of its computational complexity and the comparison with conventional methods exhibit its high efficiency.展开更多
A method of minimizing rankings inconsistency is proposed for a decision-making problem with rankings of alternatives given by multiple decision makers according to multiple criteria. For each criteria, at first, the ...A method of minimizing rankings inconsistency is proposed for a decision-making problem with rankings of alternatives given by multiple decision makers according to multiple criteria. For each criteria, at first, the total inconsistency between the rankings of all alternatives for the group and the ones for every decision maker is defined after the decision maker weights in respect to the criteria are considered. Similarly, the total inconsistency between their final rankings for the group and the ones under every criteria is determined after the criteria weights are taken into account. Then two nonlinear integer programming models minimizing respectively the two total inconsistencies above are developed and then transformed to two dynamic programming models to obtain separately the rankings of all alternatives for the group with respect to each criteria and their final rankings. A supplier selection case illustrated the proposed method, and some discussions on the results verified its effectiveness. This work develops a new measurement of ordinal preferences’ inconsistency in multi-criteria group decision-making （MCGDM） and extends the cook-seiford social selection function to MCGDM considering weights of criteria and decision makers and can obtain unique ranking result.展开更多
As to oppositional, multi-objective and hierarchical characteristic of air formation to ground attackdefends campaign, and using dynamic space state model of military campaign, this article establishes a principal and...As to oppositional, multi-objective and hierarchical characteristic of air formation to ground attackdefends campaign, and using dynamic space state model of military campaign, this article establishes a principal and subordinate hierarchical interactive decision-making way, the Nash-Stackelberg-Nash model, to solve the problems in military operation, and find out the associated best strategy in hierarchical dynamic decision-making. The simulating result indicate that when applying the model to air formation to ground attack-defends decision-making system, it can solve the problems of two hierarchies, dynamic oppositional decision-making favorably, and reach preferable effect in battle. It proves that the model can provide an effective way for analyzing a battle,展开更多
A dynamic hesitant fuzzy linguistic group decisionmaking(DHFLGDM) problem is studied from the perspective of information reliability based on the theory of hesitant fuzzy linguistic term sets(HFLTSs). First, an approa...A dynamic hesitant fuzzy linguistic group decisionmaking(DHFLGDM) problem is studied from the perspective of information reliability based on the theory of hesitant fuzzy linguistic term sets(HFLTSs). First, an approach is applied to transform the dynamic HFLTSs(DHFLTSs) into a set of proportional linguistic terms to eliminate the time dimension. Second, expert reliability is measured by considering both group similarity and degree of certainty, and an optimization method is employed to quantify the linguistic terms by maximizing the group similarity. Third, through computing the attribute stability as well as its reliability, a combination rule which considers both reliability and weight is proposed to aggregate the information, and then the aggregated grade values and degree of stability are used to make a selection. Finally,the application and feasibility of the proposed method are verified through a case study and method comparison.展开更多
Using the dynamic optimization theory, we described a decision-making model for farmer choosing land use when there are several different kinds of uses for land. To obtain an empirical model that could be easily appli...Using the dynamic optimization theory, we described a decision-making model for farmer choosing land use when there are several different kinds of uses for land. To obtain an empirical model that could be easily applied, decision rules for farmer with a single static expectation were given.展开更多
Based on analyzing the influences of a slicing scheme on stair-stepping effect, supporting structure, efficiency and deformation, etc. , analytical hierarchical process （AHP） combining with fuzzy synthetic evaluatio...Based on analyzing the influences of a slicing scheme on stair-stepping effect, supporting structure, efficiency and deformation, etc. , analytical hierarchical process （AHP） combining with fuzzy synthetic evaluation is introduced to make decision in slicing schemes for a processing part. The application in determining the slicing scheme for a computer mouse during prototyping shows that the method increases the rationality during decision- making and improves quality and efficiency for the prototyping part.展开更多
The dynamic recrystallization（DRX） behavior of Ti-6Al-2Zr-1Mo-1V alloy was investigated at deformation temperature of 1000-1100 °C and strain rate of 10-3-1.0 s-1 by using compression test.The results show that...The dynamic recrystallization（DRX） behavior of Ti-6Al-2Zr-1Mo-1V alloy was investigated at deformation temperature of 1000-1100 °C and strain rate of 10-3-1.0 s-1 by using compression test.The results show that discontinuous dynamic recrystallization（DDRX） is the predominant recrystallization mechanism at temperature higher than 1050 °C and strain rate lower than 0.01 s-1.Meanwhile,continuous dynamic recrystallization is the main mechanism observed at temperature below 1050 °C and strain rate above 0.01 s-1,mixed with a few DDRX grains.In addition,decreasing strain rate and increasing deformation temperature are found to facilitate the progress of DRX and refinement of grains in the Ti alloy in β forging process.展开更多
The absorbing process in isolating and coating process of α-olefin drag reducing polymer was studied by molecular dynamic simulation method, on basis of coating theory of α-olefin drag reducing polymer particles wit...The absorbing process in isolating and coating process of α-olefin drag reducing polymer was studied by molecular dynamic simulation method, on basis of coating theory of α-olefin drag reducing polymer particles with polyurethane as coating material. The distributions of sodium laurate, sodium dodeeyl sulfate, and sodium dodeeyl benzene sulfonate on the surface of α-olefin drag reducing polymer particles were almost the same, but the bending degrees of them were obviously different. The bending degree of SLA molecules was greater than those of the other two surfactant molecules. Simulation results of absorbing and accumulating structure showed that, though hydrophobie properties of surfactant molecules were almost the same, water density around long chain sulfonate sodium was bigger than that around alkyl sulfate sodium. This property goes against useful absorbing and accumulating on the surface of α-olefin drag reducing polymer particles; simulation results of interactions of different surfactant and multiple hydroxyl compounds on surface of particles showed that, interactions of different surfaetant and one kind of multiple hydroxyl compound were similar to those of one kind of surfaetant and different multiple hydroxyl compounds. These two contrast types of interactions also exhibited the differences of absorbing distribution and closing degrees to surface of particles. The sequence of closing degrees was derived from simulation; control step of addition polymerization interaction in coating process was absorbing mass transfer process, so the more closed to surface of particle the multiple hydroxyl compounds were, the easier interactions With isoeyanate were. Simulation results represented the compatibility relationship between surfactant and multiple hydroxyl compounds. The isolating and coating processes of α-olefin drag reducing polymer were further understood on molecule and atom level through above simulation research, and based on the simulation, a referenced theoretical basis was provided for practical optimal selection and experimental preparation of α-olefin drag reducing polymer particles suspension isolation agent.展开更多
In the research of parachute, canopy inflation process modeling is one of the most complicated tasks. As canopy often experiences the largest deformations and loa-dings during a very short time, it is of great difficu...In the research of parachute, canopy inflation process modeling is one of the most complicated tasks. As canopy often experiences the largest deformations and loa-dings during a very short time, it is of great difficulty for theoretical analysis and experimental measurements. In this paper, aerodynamic equations and structural dynamics equations were developed for describing parachute opening process, and an iterative coupling solving strategy incorpo- rating the above equations was proposed for a small-scale, flexible and flat-circular parachute. Then, analyses were carried out for canopy geometry, time-dependent pressure difference between the inside and outside of the canopy, transient vortex around the canopy and the flow field in the radial plane as a sequence in opening process. The mechanism of the canopy shape development was explained from perspective of transient flow fields during the inflation process. Experiments of the parachute opening process were conducted in a wind tunnel, in which instantaneous shape of the canopy was measured by high velocity camera and the opening loading was measured by dynamometer balance. The theoretical predictions were found in good agreement with the experimental results, validating the proposed approach. This numerical method can improve the situation of strong dependence of parachute research on wind tunnel tests, and is of significance to the understanding of the mechanics of parachute inflation process.展开更多
One of the assumptions of previous research in evolutionary game dynamics is that individuals use only one rule to update their strategy. In reality, an individual's strategy update rules may change with the envir...One of the assumptions of previous research in evolutionary game dynamics is that individuals use only one rule to update their strategy. In reality, an individual's strategy update rules may change with the environment, and it is possible for an individual to use two or more rules to update their strategy. We consider the case where an individual updates strategies based on the Moran and imitation processes, and establish mixed stochastic evolutionary game dynamics by combining both processes. Our aim is to study how individuals change strategies based on two update rules and how this affects evolutionary game dynamics. We obtain an analytic expression and properties of the fixation probability and fixation times(the unconditional fixation time or conditional average fixation time) associated with our proposed process. We find unexpected results. The fixation probability within the proposed model is independent of the probabilities that the individual adopts the imitation rule update strategy. This implies that the fixation probability within the proposed model is equal to that from the Moran and imitation processes. The one-third rule holds in the proposed mixed model. However, under weak selection, the fixation times are different from those of the Moran and imitation processes because it is connected with the probability that individuals adopt an imitation update rule. Numerical examples are presented to illustrate the relationships between fixation times and the probability that an individual adopts the imitation update rule, as well as between fixation times and selection intensity. From the simulated analysis, we find that the fixation time for a mixed process is greater than that of the Moran process, but is less than that of the imitation process. Moreover, the fixation times for a cooperator in the proposed process increase as the probability of adopting an imitation update increases; however, the relationship becomes more complex than a linear relationship.展开更多
基金financially supported by the Science and Technology Project of PetroChina Company Limited,China(No.2022DJ6314)the National Natural Science Foundation of China(No.52173056)。
文摘Dynamic melt modification of polyethylene via the direct grafting of peroxide fragments shows promise for the development of processable functionalized materials.In this study,four linear low-density polyethylenes(LLDPEs)with comparable molecular weights but different short-chain branch(SCB)contents(ranging of 5-66 per 1000 carbon atoms)were modified via dynamic melt mixing using 2 wt% benzoyl peroxide at 145℃ and 50 r/min for 30 min.The influence of SCB content on the processability and structure of the resulting products was systematically investigated.All modified products exhibited good melt processability with melt flow rates(MFR)ranging from 0.46 g/10min to 1.07 g/10min.Products derived from low-SCB LLDPEs showed a lower MFR,higher cross-linking content,a larger number of long-chain branches,and a higher degree of benzoyl grafting.In contrast,those produced from high-SCB LLDPEs exhibited improved processability,reduced cross-linking,fewer long-chain branches,and lower benzoyl grafting levels.A detailed structural investigation of the soluble and insoluble fractions,which were separated using trichlorobenzene fractionation,was conducted to analyze the structural features of various modified products and demonstrate that the SCB content(i.e.,tertiary carbon density)significantly influences radical coupling during dynamic modification.Elevated tertiary carbon density,by introducing greater steric hindrance,suppresses radical coupling during dynamic modification,thereby reducing the efficiency of both crosslinking and peroxide fragment grafting.These findings provide new insights into the structure-reactivity relationships in peroxide-induced polyethylene modification and lay the foundation for tailoring material properties via dynamic processing.
基金funded by scientific research projects under Grant JY2024B011.
文摘With the increasing complexity of industrial automation,planetary gearboxes play a vital role in largescale equipment transmission systems,directly impacting operational efficiency and safety.Traditional maintenance strategies often struggle to accurately predict the degradation process of equipment,leading to excessive maintenance costs or potential failure risks.However,existing prediction methods based on statistical models are difficult to adapt to nonlinear degradation processes.To address these challenges,this study proposes a novel condition-based maintenance framework for planetary gearboxes.A comprehensive full-lifecycle degradation experiment was conducted to collect raw vibration signals,which were then processed using a temporal convolutional network autoencoder with multi-scale perception capability to extract deep temporal degradation features,enabling the collaborative extraction of longperiod meshing frequencies and short-term impact features from the vibration signals.Kernel principal component analysis was employed to fuse and normalize these features,enhancing the characterization of degradation progression.A nonlinear Wiener process was used to model the degradation trajectory,with a threshold decay function introduced to dynamically adjust maintenance strategies,and model parameters optimized through maximum likelihood estimation.Meanwhile,the maintenance strategy was optimized to minimize costs per unit time,determining the optimal maintenance timing and preventive maintenance threshold.The comprehensive indicator of degradation trends extracted by this method reaches 0.756,which is 41.2%higher than that of traditional time-domain features;the dynamic threshold strategy reduces the maintenance cost per unit time to 55.56,which is 8.9%better than that of the static threshold optimization.Experimental results demonstrate significant reductions in maintenance costs while enhancing system reliability and safety.This study realizes the organic integration of deep learning and reliability theory in the maintenance of planetary gearboxes,provides an interpretable solution for the predictive maintenance of complex mechanical systems,and promotes the development of condition-based maintenance strategies for planetary gearboxes.
基金support from the National Natural Science Foundation of China(No.52271287)funding from the State Key Laboratory of Hydraulic Engineering Intelligent Construction and Operation,Tianjin University。
文摘During the hoisting process of the offshore substation,changes in the hoisting speed can affect the hoisting system.Therefore,this study set four different speed conditions for the lifting and lowering stages of the installation process,and studied the impact of different lifting and lowering speeds on the hoisting system under the same environmental conditions through numerical simulation.The results show that during the lifting operation,as the lifting speed increases,the swing motion of the substation and the installation vessel tends to decrease,and the faster the hoisting speed,the more obvious the swing suppression of the substation and the installation vessel,and the smaller the fluctuation in the tension amplitude of the slings and mooring lines.In contrast,during the lowering operation,as the lowering speed increases,the swing motion of the substation and the installation vessel tends to increase,and the faster the lowering speed,the more obvious the swing amplification effect of the substation and the installation vessel.Therefore,during hoisting operations,increasing the lifting speed and reducing the lowering speed can mitigate the motion performance of the hoisting coupling system,reduce the tension amplitude variation of the sling and mooring,and ensure the smooth progress of the hoisting operation.
基金supported by the National Natural Science Foundation of China(Nos.U22A20241 and 21876105)Shaanxi“Scientist&Engineer”Team(No.2023KXJ-131)Xianyang Key S&T Special Projects(No.L2023-ZDKJ-QCY-SXGG-GY-007).
文摘Electrocatalytic oxidation is a promising technology for wastewater treatment,but poor mass transfer and low current efficiency impaded its engineering applications.To address these issues,researchers have developed flow-through electrochemical reactors(FERs)primarily based on porous electrodes,where the pore structure significantly impacts the electrochemical reaction.Therefore,this study systematically investigated the impact of different pore sizes on the fluid dynamics,current potential distribution,mass transfer processes,and degradation performance of FERs.Computational Fluid Dynamics(CFD)results indicated that smaller pore sizes(10μm,30μm,and 60μm)significantly enhanced convective effects within the fluid,reduced short fluid paths and dead volume regions within the microchannels,and facilitated mass transfer processes.Additionally,smaller pore sizes were conducive to a uniform distribution of current density.Furthermore,Fe(CN)_(6)^(4−)oxidation experiments revealed that the current density at a pore size of 160μm was notably lower than that at 10μm,indicating slower mass transfer of Fe(CN)_(6)^(4−)within larger channels.Calculations based on experimental results demonstrated that the mass transfer rate at a pore size of 10μm was six times than that at 160μm,further confirming the enhancing effect of smaller pore sizes on the mass transfer process.Lastly,experiments on tetracycline degradation showed that at a residence time of 90 s,the removal efficiencies of tetracycline were 80%and 39.1%for porous electrodes with pore sizes of 10μm and 160μm,respectively,demonstrating the superior removal efficiency of smaller pore sizes for tetracycline degradation.
文摘A model for dynamic frictionless contact between a viscoelastic body and foundation is considered.The viscoelastic constitutive law is assumed to be nonlinear and the contact is modelled with the normal compliance condition.We obtain the well-posedness using nonlinear semigroup theory arguments.Moreover,the exponential stability result of the solution is shown by using the energy method to produce a suitable Lyapunov function.
基金Project supported by the National Key Research and Development Program of China(Grant No.2024YFF0508503)。
文摘Strong long-wavelength laser pulses enable direct manipulation of atomic lattices for engineering novel quantum states in complex materials.Nonlinear coupling between two infrared-active phonon modes(TO_(1) and TO_(2)),induced by intense terahertz light fields,significantly enhances the amplitude of the TO_(1) mode and facilitates ultrafast control of transient structural distortions.This light-induced distortion reduces the lattice thermal conductivity from 8.1 W·m^(-1)·K^(-1)to 3.0 W·m^(-1)·K^(-1).The reduction originates from the nonlinear coupling,which enhances anharmonic interactions in the lattice potential energy and substantially shortens the phonon lifetime(τ).This work demonstrates a strategy applicable to other perovskite materials and provides a framework for investigating light-induced electrical,optical,and thermodynamic phase transitions.
基金supported by the Research Program of the Liaoning Liaohe Laboratory(LLL23ZZ-05-012)China Academy of Engineering Institute of Land Cooperation Consulting Project(2023-DFZD-60-02)+3 种基金the Key Research and Development Program of Liaoning Province(2023JH26/10200011)the National Natural Science Foundation of China(61991404)the National Key Research and Development Program of China(2024YFB3309700)the Science and Technology Major Project 2024 of Liaoning Province(2024JH1/11700048).
文摘Based on an analysis of the role of industrial control and optimization technologies in the Industrial Revolution,as well as the current situation and existing problems of operational decision-making(ODM)for industrial process,this paper introduces the concept of intelligent ODM in industrial process,shapes its future directions,and highlights key technical challenges.By the tight conjoining of and coordination between industrial artificial intelligence(AI)with industrial control and optimization technologies,as well as the Industrial Internet with industrial computer management and control systems,an intelligent operational optimization decision-making methodology is proposed for complex industrial process.The intelligent ODM methodology and its successful application demonstrate that the tight conjoining of and coordination between next-generation information technologies with industrial control and optimization technologies will promote the development of industrial intelligent ODM.Finally,main research directions and ideas are outlined for realizing intelligent ODM in industrial process.
基金supported in part by the National Science Fund for Distinguished Young Scholars of China(62225303)the National Natural Science Fundation of China(62303039,62433004)+2 种基金the China Postdoctoral Science Foundation(BX20230034,2023M730190)the Fundamental Research Funds for the Central Universities(buctrc202201,QNTD2023-01)the High Performance Computing Platform,College of Information Science and Technology,Beijing University of Chemical Technology
文摘Data-driven process monitoring is an effective approach to assure safe operation of modern manufacturing and energy systems,such as thermal power plants being studied in this work.Industrial processes are inherently dynamic and need to be monitored using dynamic algorithms.Mainstream dynamic algorithms rely on concatenating current measurement with past data.This work proposes a new,alternative dynamic process monitoring algorithm,using dot product feature analysis(DPFA).DPFA computes the dot product of consecutive samples,thus naturally capturing the process dynamics through temporal correlation.At the same time,DPFA's online computational complexity is lower than not just existing dynamic algorithms,but also classical static algorithms(e.g.,principal component analysis and slow feature analysis).The detectability of the new algorithm is analyzed for three types of faults typically seen in process systems:sensor bias,process fault and gain change fault.Through experiments with a numerical example and real data from a thermal power plant,the DPFA algorithm is shown to be superior to the state-of-the-art methods,in terms of better monitoring performance(fault detection rate and false alarm rate)and lower computational complexity.
基金the National Natural Science Fundation of China (10377014).
文摘The manner and conditions of running the decision-making system with self-defense electronic jamming are given. After proposing the scenario of applying discrete dynamic Bayesian network to the decision making with self-defense electronic jamming, a decision-making model with self-defense electronic jamming based on the discrete dynamic Bayesian network is established. Then jamming decision inferences by the aid of the algorithm of discrete dynamic Bayesian network are carried on. The simulating result shows that this method is able to synthesize different targets which are not predominant. In this way, various features at the same time, as well as the same feature appearing at different time complement mutually; in addition, the accuracy and reliability of electronic jamming decision making are enhanced significantly.
基金Supported by National Key Research and Development Program(Grant No.2024YFB3312700)National Natural Science Foundation of China(Grant No.52405541)the Changzhou Municipal Sci&Tech Program(Grant No.CJ20241131)。
文摘Under the paradigm of Industry 5.0,intelligent manufacturing transcends mere efficiency enhancement by emphasizing human-machine collaboration,where human expertise plays a central role in assembly processes.Despite advancements in intelligent and digital technologies,assembly process design still heavily relies on manual knowledge reuse,and inefficiencies and inconsistent quality in process documentation are caused.To address the aforementioned issues,this paper proposes a knowledge push method of complex product assembly process design based on distillation model-based dynamically enhanced graph and Bayesian network.First,an initial knowledge graph is constructed using a BERT-BiLSTM-CRF model trained with integrated human expertise and a fine-tuned large language model.Then,a confidence-based dynamic weighted fusion strategy is employed to achieve dynamic incremental construction of the knowledge graph with low resource consumption.Subsequently,a Bayesian network model is constructed based on the relationships between assembly components,assembly features,and operations.Bayesian network reasoning is used to push assembly process knowledge under different design requirements.Finally,the feasibility of the Bayesian network construction method and the effectiveness of Bayesian network reasoning are verified through a specific example,significantly improving the utilization of assembly process knowledge and the efficiency of assembly process design.
文摘Based on service-oriented architecture（SOA）,a Bellman-dynamic-programming-based approach of service recovery decision-making is proposed to make valid recovery decisions.Both the attribute and the process of services in the controllable distributed information system are analyzed as the preparatory work.Using the idea of service composition as a reference,the approach translates the recovery decision-making into a planning problem regarding artificial intelligence （AI） through two steps.The first is the self-organization based on a logical view of the network,and the second is the definition of evaluation standards.Applying Bellman dynamic programming to solve the planning problem,the approach offers timely emergency response and optimal recovery source selection,meeting multiple QoS （quality of service）requirements.Experimental results demonstrate the rationality and optimality of the approach,and the theoretical analysis of its computational complexity and the comparison with conventional methods exhibit its high efficiency.
基金supported by the National Natural Science Foundation of China (60904059 60975049)+1 种基金the Philosophy and Social Science Foundation of Hunan Province (2010YBA104)the National High Technology Research and Development Program of China (863 Program)(2009AA04Z107)
文摘A method of minimizing rankings inconsistency is proposed for a decision-making problem with rankings of alternatives given by multiple decision makers according to multiple criteria. For each criteria, at first, the total inconsistency between the rankings of all alternatives for the group and the ones for every decision maker is defined after the decision maker weights in respect to the criteria are considered. Similarly, the total inconsistency between their final rankings for the group and the ones under every criteria is determined after the criteria weights are taken into account. Then two nonlinear integer programming models minimizing respectively the two total inconsistencies above are developed and then transformed to two dynamic programming models to obtain separately the rankings of all alternatives for the group with respect to each criteria and their final rankings. A supplier selection case illustrated the proposed method, and some discussions on the results verified its effectiveness. This work develops a new measurement of ordinal preferences’ inconsistency in multi-criteria group decision-making （MCGDM） and extends the cook-seiford social selection function to MCGDM considering weights of criteria and decision makers and can obtain unique ranking result.
基金College Doctor Foundation (20060699026)Aviation Basic Scientific Foundation (05D53021).
文摘As to oppositional, multi-objective and hierarchical characteristic of air formation to ground attackdefends campaign, and using dynamic space state model of military campaign, this article establishes a principal and subordinate hierarchical interactive decision-making way, the Nash-Stackelberg-Nash model, to solve the problems in military operation, and find out the associated best strategy in hierarchical dynamic decision-making. The simulating result indicate that when applying the model to air formation to ground attack-defends decision-making system, it can solve the problems of two hierarchies, dynamic oppositional decision-making favorably, and reach preferable effect in battle. It proves that the model can provide an effective way for analyzing a battle,
基金supported by the National Natural Science Foundation of China(71171112 71502073+2 种基金 71601002)the Scientific Innovation Research of College Graduates in Jiangsu Province(KYZZ150094)the Anhui Provincial Natural Science Foundation(1708085MG168)
文摘A dynamic hesitant fuzzy linguistic group decisionmaking(DHFLGDM) problem is studied from the perspective of information reliability based on the theory of hesitant fuzzy linguistic term sets(HFLTSs). First, an approach is applied to transform the dynamic HFLTSs(DHFLTSs) into a set of proportional linguistic terms to eliminate the time dimension. Second, expert reliability is measured by considering both group similarity and degree of certainty, and an optimization method is employed to quantify the linguistic terms by maximizing the group similarity. Third, through computing the attribute stability as well as its reliability, a combination rule which considers both reliability and weight is proposed to aggregate the information, and then the aggregated grade values and degree of stability are used to make a selection. Finally,the application and feasibility of the proposed method are verified through a case study and method comparison.
文摘Using the dynamic optimization theory, we described a decision-making model for farmer choosing land use when there are several different kinds of uses for land. To obtain an empirical model that could be easily applied, decision rules for farmer with a single static expectation were given.
基金Supported by the Science and Technology Support Key Project of Jiangsu Province (DE2008365)~~
文摘Based on analyzing the influences of a slicing scheme on stair-stepping effect, supporting structure, efficiency and deformation, etc. , analytical hierarchical process （AHP） combining with fuzzy synthetic evaluation is introduced to make decision in slicing schemes for a processing part. The application in determining the slicing scheme for a computer mouse during prototyping shows that the method increases the rationality during decision- making and improves quality and efficiency for the prototyping part.
基金Project (2007CB613803) supported by the National Basic Research Program of ChinaProject (2010GQC0170) supported by the Natural Science Foundation of Jiangxi Province,ChinaProject (GJJ11159) supported by the Educational Committee of Jiangxi Province,China
文摘The dynamic recrystallization（DRX） behavior of Ti-6Al-2Zr-1Mo-1V alloy was investigated at deformation temperature of 1000-1100 °C and strain rate of 10-3-1.0 s-1 by using compression test.The results show that discontinuous dynamic recrystallization（DDRX） is the predominant recrystallization mechanism at temperature higher than 1050 °C and strain rate lower than 0.01 s-1.Meanwhile,continuous dynamic recrystallization is the main mechanism observed at temperature below 1050 °C and strain rate above 0.01 s-1,mixed with a few DDRX grains.In addition,decreasing strain rate and increasing deformation temperature are found to facilitate the progress of DRX and refinement of grains in the Ti alloy in β forging process.
文摘The absorbing process in isolating and coating process of α-olefin drag reducing polymer was studied by molecular dynamic simulation method, on basis of coating theory of α-olefin drag reducing polymer particles with polyurethane as coating material. The distributions of sodium laurate, sodium dodeeyl sulfate, and sodium dodeeyl benzene sulfonate on the surface of α-olefin drag reducing polymer particles were almost the same, but the bending degrees of them were obviously different. The bending degree of SLA molecules was greater than those of the other two surfactant molecules. Simulation results of absorbing and accumulating structure showed that, though hydrophobie properties of surfactant molecules were almost the same, water density around long chain sulfonate sodium was bigger than that around alkyl sulfate sodium. This property goes against useful absorbing and accumulating on the surface of α-olefin drag reducing polymer particles; simulation results of interactions of different surfactant and multiple hydroxyl compounds on surface of particles showed that, interactions of different surfaetant and one kind of multiple hydroxyl compound were similar to those of one kind of surfaetant and different multiple hydroxyl compounds. These two contrast types of interactions also exhibited the differences of absorbing distribution and closing degrees to surface of particles. The sequence of closing degrees was derived from simulation; control step of addition polymerization interaction in coating process was absorbing mass transfer process, so the more closed to surface of particle the multiple hydroxyl compounds were, the easier interactions With isoeyanate were. Simulation results represented the compatibility relationship between surfactant and multiple hydroxyl compounds. The isolating and coating processes of α-olefin drag reducing polymer were further understood on molecule and atom level through above simulation research, and based on the simulation, a referenced theoretical basis was provided for practical optimal selection and experimental preparation of α-olefin drag reducing polymer particles suspension isolation agent.
基金the National Natural Science Foundation of China(10377006).
文摘In the research of parachute, canopy inflation process modeling is one of the most complicated tasks. As canopy often experiences the largest deformations and loa-dings during a very short time, it is of great difficulty for theoretical analysis and experimental measurements. In this paper, aerodynamic equations and structural dynamics equations were developed for describing parachute opening process, and an iterative coupling solving strategy incorpo- rating the above equations was proposed for a small-scale, flexible and flat-circular parachute. Then, analyses were carried out for canopy geometry, time-dependent pressure difference between the inside and outside of the canopy, transient vortex around the canopy and the flow field in the radial plane as a sequence in opening process. The mechanism of the canopy shape development was explained from perspective of transient flow fields during the inflation process. Experiments of the parachute opening process were conducted in a wind tunnel, in which instantaneous shape of the canopy was measured by high velocity camera and the opening loading was measured by dynamometer balance. The theoretical predictions were found in good agreement with the experimental results, validating the proposed approach. This numerical method can improve the situation of strong dependence of parachute research on wind tunnel tests, and is of significance to the understanding of the mechanics of parachute inflation process.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.71871171,71871173,and 71832010)
文摘One of the assumptions of previous research in evolutionary game dynamics is that individuals use only one rule to update their strategy. In reality, an individual's strategy update rules may change with the environment, and it is possible for an individual to use two or more rules to update their strategy. We consider the case where an individual updates strategies based on the Moran and imitation processes, and establish mixed stochastic evolutionary game dynamics by combining both processes. Our aim is to study how individuals change strategies based on two update rules and how this affects evolutionary game dynamics. We obtain an analytic expression and properties of the fixation probability and fixation times(the unconditional fixation time or conditional average fixation time) associated with our proposed process. We find unexpected results. The fixation probability within the proposed model is independent of the probabilities that the individual adopts the imitation rule update strategy. This implies that the fixation probability within the proposed model is equal to that from the Moran and imitation processes. The one-third rule holds in the proposed mixed model. However, under weak selection, the fixation times are different from those of the Moran and imitation processes because it is connected with the probability that individuals adopt an imitation update rule. Numerical examples are presented to illustrate the relationships between fixation times and the probability that an individual adopts the imitation update rule, as well as between fixation times and selection intensity. From the simulated analysis, we find that the fixation time for a mixed process is greater than that of the Moran process, but is less than that of the imitation process. Moreover, the fixation times for a cooperator in the proposed process increase as the probability of adopting an imitation update increases; however, the relationship becomes more complex than a linear relationship.
