A high-density tungsten-zirconium-titanium(W-Zr-Ti)reactive alloy was prepared by powder metallurgy.This alloy exhibits high density,high strength,and violent energy release characteristics,resulting in outstanding pe...A high-density tungsten-zirconium-titanium(W-Zr-Ti)reactive alloy was prepared by powder metallurgy.This alloy exhibits high density,high strength,and violent energy release characteristics,resulting in outstanding penetration and ignition abilities.Dynamic impact experiment demonstrated its strain rate hardening effect,and the energetic characteristics were investigated by digital image processing technique and thermal analysis experiment.The results show that W-Zr-Ti reactive alloy performs compressive strength of 2.25 GPa at 5784 s^(-1)strain rate,and its exothermic reaction occurs at about 961 K.Based on the explosion test and shock wave theory,thresholds of enhanced damage effect are less than 35.77 GPa and 5.18×10^(4)kJ/m^(2)for shock pressure and energy,respectively.Furthermore,the transformation of fracture behavior and failure mechanism is revealed,which causes the increase in compressive strength and reaction intensity under dynamic loading.展开更多
This study explored the dynamic behaviors and fracturing mechanisms of flawed granite under split-Hopkinson pressure bar testing,focusing on factors like grain size and flaw dimensions.By means of digital image proces...This study explored the dynamic behaviors and fracturing mechanisms of flawed granite under split-Hopkinson pressure bar testing,focusing on factors like grain size and flaw dimensions.By means of digital image processing and the discrete element method,Particle Flow Code 2D(PFC2D)models were constructed based on real granite samples,effectively overcoming the limitations of prior studies that mainly relied on randomized parameters.The results illustrate that the crack distribution of granite is significantly influenced by grain size and flaw dimensions.Tension cracks predominate and mineral boundaries,such as between feldspar and quartz,become primary crack sites.Both flaw length and width critically affect the crack density,distribution,and dynamic strength of granite.Specifically,dynamic strength tends to decrease with the enlargement of flaws and increase with an increase in flaw angles up to 90°.展开更多
The aerial deployment method enables Unmanned Aerial Vehicles(UAVs)to be directly positioned at the required altitude for their mission.This method typically employs folding technology to improve loading efficiency,wi...The aerial deployment method enables Unmanned Aerial Vehicles(UAVs)to be directly positioned at the required altitude for their mission.This method typically employs folding technology to improve loading efficiency,with applications such as the gravity-only aerial deployment of high-aspect-ratio solar-powered UAVs,and aerial takeoff of fixed-wing drones in Mars research.However,the significant morphological changes during deployment are accompanied by strong nonlinear dynamic aerodynamic forces,which result in multiple degrees of freedom and an unstable character.This hinders the description and analysis of unknown dynamic behaviors,further leading to difficulties in the design of deployment strategies and flight control.To address this issue,this paper proposes an analysis method for dynamic behaviors during aerial deployment based on the Variational Autoencoder(VAE).Focusing on the gravity-only deployment problem of highaspect-ratio foldable-wing UAVs,the method encodes the multi-degree-of-freedom unstable motion signals into a low-dimensional feature space through a data-driven approach.By clustering in the feature space,this paper identifies and studies several dynamic behaviors during aerial deployment.The research presented in this paper offers a new method and perspective for feature extraction and analysis of complex and difficult-to-describe extreme flight dynamics,guiding the research on aerial deployment drones design and control strategies.展开更多
The understanding of the impact of high-velocity microparticles on human skin tissue is important for the ad-ministration of drugs during transdermal drug delivery.This paper aims to numerically investigate the dynami...The understanding of the impact of high-velocity microparticles on human skin tissue is important for the ad-ministration of drugs during transdermal drug delivery.This paper aims to numerically investigate the dynamic behavior of human skin tissue under micro-particle impact in transdermal drug delivery.The numerical model was developed based on a coupled smoothed particle hydrodynamics(SPH)and FEM method via commercial FE software RADIOSS.Analytical analysis was conducted applying the Poncelet model and was used as validation data.A hyperelastic one-term Ogden model with one pair of material parameters(μ,α)was implemented for the skin tissue.Sensitivity studies reveal that the effect of parameter α on the penetration process is much more significant than μ.Numerical results correlate well with the analytical curves with various particle diameters and impact velocities,its capability of predicting the penetration process of micro-particle impacts into skin tissues.This work can be further investigated to guide the design of transdermal drug delivery equipment.展开更多
Biological neurons exhibit a double-membrane structure and perform specialized functions.Replicating the doublemembrane architecture in artificial neurons to mimic biological neuronal functions is a compelling researc...Biological neurons exhibit a double-membrane structure and perform specialized functions.Replicating the doublemembrane architecture in artificial neurons to mimic biological neuronal functions is a compelling research challenge.In this study,we propose a multifunctional neural circuit composed of two capacitors,two linear resistors,a phototube cell,a nonlinear resistor,and a memristor.The phototube and charge-controlled memristor serve as sensors for external light and electric field signals,respectively.By applying Kirchhoff's and Helmholtz's laws,we derive the system's nonlinear dynamical equations and energy function.We further investigate the circuit's dynamics using methods from nonlinear dynamics.Our results show that the circuit can exhibit both periodic and chaotic patterns under stimulation by external light and electric fields.展开更多
This study investigates the dynamic compressive behavior of three periodic lattice structures fabricated from Ti-6Al-4V titanium alloy,each with distinct topologies:simple cubic(SC),body-centered cubic(BCC),and face-c...This study investigates the dynamic compressive behavior of three periodic lattice structures fabricated from Ti-6Al-4V titanium alloy,each with distinct topologies:simple cubic(SC),body-centered cubic(BCC),and face-centered cubic(FCC).Dynamic compression experiments were conducted using a Split Hopkinson Pressure Bar(SHPB)system,complemented by high-speed imaging to capture real-time deformation and failure mechanisms under impact loading.The influence of cell topology,relative density,and strain rate on dynamic mechanical properties,failure behavior,and stress wave propagation was systematically examined.Finite element modeling was performed,and the simulated results showed good agreement with experimental data.The findings reveal that the dynamic mechanical properties of the lattice structures are generally insensitive to strain rate variations,while failure behavior is predominantly governed by structural configuration.The SC structure exhibited strut buckling and instability-induced fracture,whereas the BCC and FCC structures displayed layer-by-layer crushing with lower strain rate sensitivity.Regarding stress wave propagation,all structures demonstrated significant attenuation capabilities,with the BCC structure achieving the greatest reduction in transmitted wave amplitude and energy.Across all configurations,wave reflection was identified as the primary energy dissipation mechanism.These results provide critical insights into the design of lattice structures for impact mitigation and energy absorption applications.展开更多
Exploring dynamic mechanical responses and failure behaviors of hot dry rock(HDR)is significant for geothermal exploitation and stability assessment.In this study,via the split Hopkinson pressure bar(SHPB)system,a ser...Exploring dynamic mechanical responses and failure behaviors of hot dry rock(HDR)is significant for geothermal exploitation and stability assessment.In this study,via the split Hopkinson pressure bar(SHPB)system,a series of dynamic compression tests were conducted on granite treated by cyclic thermal shocks at different temperatures.We analyzed the effects of cyclic thermal shock on the thermal-related physical and dynamic mechanical behaviors of granite.Specifically,the P-wave velocity,dynamic strength,and elastic modulus of the tested granite decrease with increasing temperature and cycle number,while porosity and peak strain increase.The degradation law of dynamic mechanical properties could be described by a cubic polynomial.Cyclic thermal shock promotes shear cracks propagation,causing dynamic failure mode of granite to transition from splitting to tensile-shear composite failure,accompanied by surface spalling and debris splashing.Moreover,the thermal shock damage evolution and coupled failure mechanism of tested granite are discussed.The evolution of thermal shock damage with thermal shock cycle numbers shows an obvious S-shaped surface,featured by an exponential correlation with dynamic mechanical parameters.In addition,with increasing thermal shock temperature and cycles,granite mineral species barely change,but the length and width of thermal cracks increase significantly.The non-uniform expansion of minerals,thermal shock-induced cracking,and water-rock interaction are primary factors for deteriorating dynamic mechanical properties of granite under cyclic thermal shock.展开更多
Poly(phthalazinone ether sulfone ketone)(PPESK)is a new-generation high-performance thermoplastic resin that exhibits excellent thermal stability and mechanical properties.However,its damage and failure mechanisms und...Poly(phthalazinone ether sulfone ketone)(PPESK)is a new-generation high-performance thermoplastic resin that exhibits excellent thermal stability and mechanical properties.However,its damage and failure mechanisms under high-temperature and high-strain-rate coupling conditions remain unclear,significantly limiting the engineering applications of PPESK-based composites in extreme environments such as aerospace.To address this issue,in this study,a temperature-controlled split Hopkinson pressure bar experimental platform was developed for dynamic tensile/compressive loading scenarios.Combined with scanning electron microscopy and molecular dynamics simulations,the thermomechanical behavior and failure mechanisms of PPESK were systematically investigated over the temperature range of 293-473 K.The study revealed a novel"dynamic hysteresis brittle behavior"and its underlying"segmental activation±response lag antagonistic mechanism".The results showed that the strain-rate-induced response lag of polymer chain segments significantly weakened the viscous dissipation capacity activated by thermal energy at elevated temperatures.Although high-strain-rate conditions led to notable enhancement in the dynamic strength of the material(with an increase of 8%-233%,reaching 130%-330%at elevated temperatures),the fracture surface morphology tended to become smoother,and brittle fracture characteristics became more pronounced.Based on these findings,a temperature±strain rate hysteresis antagonistic function was constructed,which effectively captured the competitive relationship between temperature-driven relaxation behavior and strain-rateinduced hysteresis in thermoplastic resins.A multiscale damage evolution constitutive model with temperature±rate coupling was subsequently established and numerically implemented via the VUMAT user subroutine.This study not only unveils the nonlinear damage mechanisms of PPESK under combined service temperatures and dynamic/static loading conditions,but also provides a strong theoretical foundation and engineering guidance for the constitutive modeling and parametric design of thermoplastic resin-based materials.展开更多
In order to research the concrete archaized buildings with lintel-column joint,2 specimens were tested under dynamic experiment.The failure characteristics,skeleton curves,mechanical behavior such as the load-displace...In order to research the concrete archaized buildings with lintel-column joint,2 specimens were tested under dynamic experiment.The failure characteristics,skeleton curves,mechanical behavior such as the load-displacement hysteretic loops,load carrying capacity,degradation of strength and stiffness,ductility and energy dissipation of the joints were analyzed.The results indicate that comparies with the lintel-column joints,the loading capacity and energy dissipation of the concrete archaized buildings with dual lintel-column joints are higher,and the hysteretic loops is in plump-shape.However,the displacement ductility coefficient is less than that of lintel-column joints.Both of them of the regularity of rigidity degeneration are basically the same.Generally,the joints have the good energy dissipation capacity.And the concrete archaized buildings with lintel-column joints exhibit excellent seismic behavior.展开更多
A rotor system supported by roller beatings displays very complicated nonlinear behaviors due to nonlinear Hertzian contact forces, radial clearances and bearing waviness. This paper presents nonlinear bearing forces ...A rotor system supported by roller beatings displays very complicated nonlinear behaviors due to nonlinear Hertzian contact forces, radial clearances and bearing waviness. This paper presents nonlinear bearing forces of a roller bearing under four-dimensional loads and establishes 4-DOF dynamics equations of a rotor roller bearing system. The methods of Newmark-β and of Newton-Laphson are used to solve the nonlinear equations. The dynamics behaviors of a rigid rotor system are studied through the bifurcation, the Poincar è maps, the spectrum diagrams and the axis orbit of responses of the system. The results show that the system is liable to undergo instability caused by the quasi-periodic bifurcation, the periodic-doubling bifurcation and chaos routes as the rotational speed increases. Clearances, outer race waviness, inner race waviness, roller waviness, damping, radial forces and unbalanced forces-all these bring a significant influence to bear on the system stability. As the clearance increases, the dynamics behaviors become complicated with the number and the scale of instable regions becoming larger. The vibration frequencies induced by the roller bearing waviness and the orders of the waviness might cause severe vibrations. The system is able to eliminate non-periodic vibration by reasonable choice and optimization of the parameters.展开更多
The quasi-static and dynamic tensile behaviors in electron beam welded（EBW） Ti-6Al-4V alloy were investigated at strain rates of 10-3 and 103 s-1,respectively,by materials test system（MTS） and reconstructive Hopki...The quasi-static and dynamic tensile behaviors in electron beam welded（EBW） Ti-6Al-4V alloy were investigated at strain rates of 10-3 and 103 s-1,respectively,by materials test system（MTS） and reconstructive Hopkinson bars apparatus.The microstructures of the base metal（BM） and the welded metal（WM） were observed with optical microscope.The fracture characteristics of the BM and WM were characterized with scanning electronic microscope.In Ti-6Al-4V alloy joint,the flow stress of WM is higher than that of BM,while the fracture strain of WM is less than that of BM at strain rates of 103 and 10-3 s-1,respectively.The fracture strain of WM has apparent improvement when the strain rate rises from 10-3 to 103 s-1,while the fracture strain of BM almost has no change.At the same time,the fracture mode of WM alters from brittle to ductile fracture,which causes improvement of the fracture strain of WM.展开更多
Dynamic rheological characteristics of polypropylene (PP) filled with ultra-fine full-vulcanized powdered rubber (UFPR) composed of styrene-butadiene copolymer were studied through dynamic rheological measurements on ...Dynamic rheological characteristics of polypropylene (PP) filled with ultra-fine full-vulcanized powdered rubber (UFPR) composed of styrene-butadiene copolymer were studied through dynamic rheological measurements on an Advanced Rheometric Expansion System (ARES). A specific viscoelastic phenomenon, i.e. 'the second plateau', appeared at low frequencies, and exhibits a certain dependence on the amount of rubber particles and the dispersion state in the matrix. This phenomenon is attributed to the formation of aggregation structure of rubber particles. The analyses of Cole-Cole diagrams of the dynamic viscoelastic functions suggest that the heterogeneity of the composites is enhanced on increasing both particle content and temperature.展开更多
A series of centrifuge model tests of sandy slopes were conducted to study the dynamic behavior of pile-reinforced slopes subjected to various motions.Time histories of accelerations,bending moments and pile earth pre...A series of centrifuge model tests of sandy slopes were conducted to study the dynamic behavior of pile-reinforced slopes subjected to various motions.Time histories of accelerations,bending moments and pile earth pressures were obtained during excitation of the adjusted El Centro earthquake and a cyclic motion.Under a realistic earthquake,the overall response of the pile-reinforced slope is lower than that of the non-reinforced slope.The histories of bending moments and dynamic earth pressures reach their maximums soon after shaking started and then remain roughly stable until the end of shaking.Maximum moments occur at the height of 3.5 m,which is the deeper section of the pile,indicating the interface between the active loading and passive resistance regions.The dynamic earth pressures above the slope base steadily increase with the increase of height of pile.For the model under cyclic input motion,response amplitudes at different locations in the slope are almost the same,indicating no significant response amplification.Both the bending moment and earth pressure increase gradually over a long period.展开更多
The radial symmetric motion problem was examined for a spherical shell composed of a class of imperfect incompressible hyper-elastic materials, in which the materials may be viewed as the homogeneous incompressible is...The radial symmetric motion problem was examined for a spherical shell composed of a class of imperfect incompressible hyper-elastic materials, in which the materials may be viewed as the homogeneous incompressible isotropic neo-Hookean material with radial perturbations. A second-order nonlinear ordinary differential equation that describes the radial motion of the inner surface of the shell was obtained. And the first integral of the equation was then carded out. Via analyzing the dynamical properties of the solution of the differential equation, the effects of the prescribed imperfection parameter of the material and the ratio of the inner and the outer radii of the underformed shell on the motion of the inner surface of the shell were discussed, and the corresponding numerical examples were carded out simultaneously. In particular, for some given parameters, it was proved that, there exists a positive critical value, and the motion of the inner surface with respect to time will present a nonlinear periodic oscillation as the difference between the inner and the outer presses does not exceed the critical value. However, as the difference exceeds the critical value, the motion of the inner surface with respect to time will increase infinitely. That is to say, the shell will be destroyed ultimately.展开更多
The dynamic behavior of a bridge-erecting machine, carrying a moving mass suspended by a wire rope, is investigated. The bridge-erecting machine is modelled by a simply supported uniform beam, and a massless equivale...The dynamic behavior of a bridge-erecting machine, carrying a moving mass suspended by a wire rope, is investigated. The bridge-erecting machine is modelled by a simply supported uniform beam, and a massless equivalent ＂spring-damper＂ system with an effective spring constant and an effective damping coefficient is used to model the moving mass suspended by the wire rope. The suddenly applied load is represented by a unitary Dirac Delta function. With the expansion method, a simple closed-form solution for the equation of motion with the replaced spring-damper-mass system is formulated. The characters of the rope are included in the derivation of the differential equation of motion for the system. The numerical examples show that the effects of the damping coefficient and the spring constant of the rope on the deflection have significant variations with the loading frequency. The effects of the damping coefficient and the spring constant under different beam lengths are also examined. The obtained results validate the presented approach, and provide significant references in the design process of bridgeerecting machines.展开更多
The marine risers are often subjected to parametric excitations from the fluctuation top tension. The top tension on the riser may fluctuate with multiple frequencies caused by irregular waves. In this paper, the infl...The marine risers are often subjected to parametric excitations from the fluctuation top tension. The top tension on the riser may fluctuate with multiple frequencies caused by irregular waves. In this paper, the influence between different frequency components in the top tension on the riser system is theoretically simulated and analyzed. With the Euler-Bernoulli beam theory, a dynamic model for the vibrations of the riser is established. The top tension is set as fluctuating with time and it has two different frequencies. The influences from the fluctuation amplitudes, circular frequencies and phase angles of these frequency components on the riser system are analyzed in detail. When these two frequencies are fluctuating in the stable regions, the riser system may become unstable because ω1+ω2≈2Ωn. The fluctuation amplitudes of these frequencies have little effect on the components of the vibration frequencies of the riser. For different phase angles, the stability and dynamic behaviors of the riser would be different.展开更多
Calcareous sand has distinct characteristics in comparison with silica sand, such as dynamic behavior at high strain rates(HSRs). This is closely related to pile driving, aircraft wheel loading and mining activities. ...Calcareous sand has distinct characteristics in comparison with silica sand, such as dynamic behavior at high strain rates(HSRs). This is closely related to pile driving, aircraft wheel loading and mining activities. To understand the response of calcareous sand at HSRs, a series of dynamic tests is performed using the split Hopkinson pressure bar(SHPB) with steel sleeve, including 6 validation tests of bar-against-bar and 16 comparative tests relevant to the relative density and strain rate of calcareous and silica sands.The apparent dynamic stiffness of calcareous sand is approximately 10% of that for silica sand due to different particle shapes and mineral compositions. The axial stress-strain response of silica sand is mainly governed by the deformation of individual grain and soil skeleton, and particle crushing. However, porous calcareous sand shows yielding and strain-hardening responses that are always followed by particle crushing. As the applied loading increases, the particle crushing of calcareous sand develops from local instability to whole breakage. Calcareous sand has lower viscous flow effects compared with silica sand at HSRs.展开更多
The single-layer latticed cylindrical shell is one of the most widely adopted space-fl'amed structures.In this paper,free vibration properties and dynamic response to horizontal and vertical seismic waves of singl...The single-layer latticed cylindrical shell is one of the most widely adopted space-fl'amed structures.In this paper,free vibration properties and dynamic response to horizontal and vertical seismic waves of single-layer latticed cylindrical shells are analyzed by the finite element method using ANSYS software.In the numerical study,where hundreds of cases were analyzed,the parameters considered included rise-span ratio,length-span ratio,surface load and member section size.Moreover,to better define the actual behavior of single-layer latticed shells,the study is focused on the dynamic stress response to both axial forces and bending moments.Based on the numerical results,the effects of the parameters considered on the stresses are discussed and a modified seismic force coefficient method is suggested.In addition,some advice based on these research results is presented to help in the future design of such structures.展开更多
In order to reduce economic and life losses due to terrorism or accidental explosion threats, reinforced concrete （RC） slabs of buildings need to he designed or retrofitted to resist blast loading. In this paper the...In order to reduce economic and life losses due to terrorism or accidental explosion threats, reinforced concrete （RC） slabs of buildings need to he designed or retrofitted to resist blast loading. In this paper the dynamic behavior of RC slabs under blast loading and its influencing factors are studied. The numerical model of an RC slab subjected to blast loading is established using the explicit dynamic analysis software. Both the strain rate effect and the damage accumulation are taken into account in the material model. The dynamic responses of the RC slab subjected to blast loading are analyzed, and the influence of concrete strength, thickness and reinforcement ratio on the behavior of the RC slab under blast loading is numerically investigated. Based on the numerical results, some principles for blast-resistant design and retrofitting are proposed to improve the behavior of the RC slab subjected to blast loading.展开更多
Coral reef limestone at different depositional depths and facies differ remarkably on the textural and mineralogical characteristics,owing to the complex sedimentary diagenesis.To explore the effects of pore structure...Coral reef limestone at different depositional depths and facies differ remarkably on the textural and mineralogical characteristics,owing to the complex sedimentary diagenesis.To explore the effects of pore structure and mineral composition associated with diagenetic variation on the mechanical behavior of reef limestone,a series of quasi-static and dynamic compression tests along with microscopic examinations were performed on the reef limestone at shallow and deep burial depths.It is revealed that the shallow reef limestone(SRL)is classified as a porous aragonite-type carbonate rock with high porosity(55.3±3.2)%and pore connectivity.In comparison,the deep reef limestone(DRL)is mainly composed of dense calcite-type calcium carbonate with low porosity(4.9±1.6)%and pore connectivity.The DRL strengthened and stiffened by the tight grain framework consistently displays much higher values of the dynamic compressive strength,elastic modulus,brittleness index,and specific energy absorption than those of the SRL.The gap between two types of limestone further increases with an increase in strain rate.It appears that the failure pattern of SRL is dominated by the inherent defects like weak bonding interfaces and growth lines,revealed by the intricate fracturing network and mixed failure.Likewise,although the preexisting megapores in DRL may affect the crack propagation on pore tips to a certain distance,it hardly alters the axial splitting failure of DRL under impacts.The stress wave propagation and attenuation in SRL is primarily controlled by the reflection and diffusion caused by plenty mesopores,as well as an energy dissipation in layer-wise pore collapse and adjacent grain crushing,while the stress wave in DRL is highly hinged on the insulation and diffraction induced by the isolated megapores.This process is accompanied by the energy dissipation behavior of inelastic deformation resulted from the pore-emanated microcracking.展开更多
基金National Natural Science Foundation of China(12002045)Supported by State Key Laboratory of Explosion Science and Safety Protection,Beijing Institute of Technology(QNKT22-09)。
文摘A high-density tungsten-zirconium-titanium(W-Zr-Ti)reactive alloy was prepared by powder metallurgy.This alloy exhibits high density,high strength,and violent energy release characteristics,resulting in outstanding penetration and ignition abilities.Dynamic impact experiment demonstrated its strain rate hardening effect,and the energetic characteristics were investigated by digital image processing technique and thermal analysis experiment.The results show that W-Zr-Ti reactive alloy performs compressive strength of 2.25 GPa at 5784 s^(-1)strain rate,and its exothermic reaction occurs at about 961 K.Based on the explosion test and shock wave theory,thresholds of enhanced damage effect are less than 35.77 GPa and 5.18×10^(4)kJ/m^(2)for shock pressure and energy,respectively.Furthermore,the transformation of fracture behavior and failure mechanism is revealed,which causes the increase in compressive strength and reaction intensity under dynamic loading.
基金National Natural Science Foundation of China,Grant/Award Number:52274131General Project of China Postdoctoral Science Foundation,Grant/Award Number:2023M742141Talent Introduction Project of Shandong University of Science and Technology,Grant/Award Number:0104060540171。
文摘This study explored the dynamic behaviors and fracturing mechanisms of flawed granite under split-Hopkinson pressure bar testing,focusing on factors like grain size and flaw dimensions.By means of digital image processing and the discrete element method,Particle Flow Code 2D(PFC2D)models were constructed based on real granite samples,effectively overcoming the limitations of prior studies that mainly relied on randomized parameters.The results illustrate that the crack distribution of granite is significantly influenced by grain size and flaw dimensions.Tension cracks predominate and mineral boundaries,such as between feldspar and quartz,become primary crack sites.Both flaw length and width critically affect the crack density,distribution,and dynamic strength of granite.Specifically,dynamic strength tends to decrease with the enlargement of flaws and increase with an increase in flaw angles up to 90°.
基金co-supported by the Natural Science Basic Research Program of Shaanxi,China(No.2023-JC-QN-0043)the ND Basic Research Funds,China(No.G2022WD).
文摘The aerial deployment method enables Unmanned Aerial Vehicles(UAVs)to be directly positioned at the required altitude for their mission.This method typically employs folding technology to improve loading efficiency,with applications such as the gravity-only aerial deployment of high-aspect-ratio solar-powered UAVs,and aerial takeoff of fixed-wing drones in Mars research.However,the significant morphological changes during deployment are accompanied by strong nonlinear dynamic aerodynamic forces,which result in multiple degrees of freedom and an unstable character.This hinders the description and analysis of unknown dynamic behaviors,further leading to difficulties in the design of deployment strategies and flight control.To address this issue,this paper proposes an analysis method for dynamic behaviors during aerial deployment based on the Variational Autoencoder(VAE).Focusing on the gravity-only deployment problem of highaspect-ratio foldable-wing UAVs,the method encodes the multi-degree-of-freedom unstable motion signals into a low-dimensional feature space through a data-driven approach.By clustering in the feature space,this paper identifies and studies several dynamic behaviors during aerial deployment.The research presented in this paper offers a new method and perspective for feature extraction and analysis of complex and difficult-to-describe extreme flight dynamics,guiding the research on aerial deployment drones design and control strategies.
基金supported by the Nanjing Institute of Technology(Grant No.YKJ202301).
文摘The understanding of the impact of high-velocity microparticles on human skin tissue is important for the ad-ministration of drugs during transdermal drug delivery.This paper aims to numerically investigate the dynamic behavior of human skin tissue under micro-particle impact in transdermal drug delivery.The numerical model was developed based on a coupled smoothed particle hydrodynamics(SPH)and FEM method via commercial FE software RADIOSS.Analytical analysis was conducted applying the Poncelet model and was used as validation data.A hyperelastic one-term Ogden model with one pair of material parameters(μ,α)was implemented for the skin tissue.Sensitivity studies reveal that the effect of parameter α on the penetration process is much more significant than μ.Numerical results correlate well with the analytical curves with various particle diameters and impact velocities,its capability of predicting the penetration process of micro-particle impacts into skin tissues.This work can be further investigated to guide the design of transdermal drug delivery equipment.
基金Project supported by the Gansu Provincial Department of Education University Teacher Innovation Fund Project(Grant No.2024A-168)the Qingyang Science and Technology Plan Project(Grant No.QY-STK-2024B-193)the Horizontal Research Project of Longdong University(Grant No.HXZK2422)。
文摘Biological neurons exhibit a double-membrane structure and perform specialized functions.Replicating the doublemembrane architecture in artificial neurons to mimic biological neuronal functions is a compelling research challenge.In this study,we propose a multifunctional neural circuit composed of two capacitors,two linear resistors,a phototube cell,a nonlinear resistor,and a memristor.The phototube and charge-controlled memristor serve as sensors for external light and electric field signals,respectively.By applying Kirchhoff's and Helmholtz's laws,we derive the system's nonlinear dynamical equations and energy function.We further investigate the circuit's dynamics using methods from nonlinear dynamics.Our results show that the circuit can exhibit both periodic and chaotic patterns under stimulation by external light and electric fields.
基金supported by the National Natural Science Foundations of China(No.11972267 and 11802214)the Fundamental Research Funds for the Central Universities(No.104972024JYS0022)the Open Fund of the Hubei Longzhong Laboratory(No.2024KF-30).
文摘This study investigates the dynamic compressive behavior of three periodic lattice structures fabricated from Ti-6Al-4V titanium alloy,each with distinct topologies:simple cubic(SC),body-centered cubic(BCC),and face-centered cubic(FCC).Dynamic compression experiments were conducted using a Split Hopkinson Pressure Bar(SHPB)system,complemented by high-speed imaging to capture real-time deformation and failure mechanisms under impact loading.The influence of cell topology,relative density,and strain rate on dynamic mechanical properties,failure behavior,and stress wave propagation was systematically examined.Finite element modeling was performed,and the simulated results showed good agreement with experimental data.The findings reveal that the dynamic mechanical properties of the lattice structures are generally insensitive to strain rate variations,while failure behavior is predominantly governed by structural configuration.The SC structure exhibited strut buckling and instability-induced fracture,whereas the BCC and FCC structures displayed layer-by-layer crushing with lower strain rate sensitivity.Regarding stress wave propagation,all structures demonstrated significant attenuation capabilities,with the BCC structure achieving the greatest reduction in transmitted wave amplitude and energy.Across all configurations,wave reflection was identified as the primary energy dissipation mechanism.These results provide critical insights into the design of lattice structures for impact mitigation and energy absorption applications.
基金The authors are grateful for the financial support from the National Natural Science Foundation of China(Grant Nos.52225904 and 52039007)the Natural Science Foundation of Sichuan Province(Grant No.2023NSFSC0377)supported by the New Cornerstone Science Foundation through the XPLORER PRIZE.
文摘Exploring dynamic mechanical responses and failure behaviors of hot dry rock(HDR)is significant for geothermal exploitation and stability assessment.In this study,via the split Hopkinson pressure bar(SHPB)system,a series of dynamic compression tests were conducted on granite treated by cyclic thermal shocks at different temperatures.We analyzed the effects of cyclic thermal shock on the thermal-related physical and dynamic mechanical behaviors of granite.Specifically,the P-wave velocity,dynamic strength,and elastic modulus of the tested granite decrease with increasing temperature and cycle number,while porosity and peak strain increase.The degradation law of dynamic mechanical properties could be described by a cubic polynomial.Cyclic thermal shock promotes shear cracks propagation,causing dynamic failure mode of granite to transition from splitting to tensile-shear composite failure,accompanied by surface spalling and debris splashing.Moreover,the thermal shock damage evolution and coupled failure mechanism of tested granite are discussed.The evolution of thermal shock damage with thermal shock cycle numbers shows an obvious S-shaped surface,featured by an exponential correlation with dynamic mechanical parameters.In addition,with increasing thermal shock temperature and cycles,granite mineral species barely change,but the length and width of thermal cracks increase significantly.The non-uniform expansion of minerals,thermal shock-induced cracking,and water-rock interaction are primary factors for deteriorating dynamic mechanical properties of granite under cyclic thermal shock.
基金supported by National Key Research and Development Program"Advanced Structures and Composite Materials"Special Project[Grant No.2024YFB3712800]the Fundamental Research Funds for the Central Universities[Grant No.DUT22-LAB605]Liaoning Province's"Unveiling the List and Leading the Way"Science and Technology Research and Development Special Project[Grant No.2022JH1/10400043]。
文摘Poly(phthalazinone ether sulfone ketone)(PPESK)is a new-generation high-performance thermoplastic resin that exhibits excellent thermal stability and mechanical properties.However,its damage and failure mechanisms under high-temperature and high-strain-rate coupling conditions remain unclear,significantly limiting the engineering applications of PPESK-based composites in extreme environments such as aerospace.To address this issue,in this study,a temperature-controlled split Hopkinson pressure bar experimental platform was developed for dynamic tensile/compressive loading scenarios.Combined with scanning electron microscopy and molecular dynamics simulations,the thermomechanical behavior and failure mechanisms of PPESK were systematically investigated over the temperature range of 293-473 K.The study revealed a novel"dynamic hysteresis brittle behavior"and its underlying"segmental activation±response lag antagonistic mechanism".The results showed that the strain-rate-induced response lag of polymer chain segments significantly weakened the viscous dissipation capacity activated by thermal energy at elevated temperatures.Although high-strain-rate conditions led to notable enhancement in the dynamic strength of the material(with an increase of 8%-233%,reaching 130%-330%at elevated temperatures),the fracture surface morphology tended to become smoother,and brittle fracture characteristics became more pronounced.Based on these findings,a temperature±strain rate hysteresis antagonistic function was constructed,which effectively captured the competitive relationship between temperature-driven relaxation behavior and strain-rateinduced hysteresis in thermoplastic resins.A multiscale damage evolution constitutive model with temperature±rate coupling was subsequently established and numerically implemented via the VUMAT user subroutine.This study not only unveils the nonlinear damage mechanisms of PPESK under combined service temperatures and dynamic/static loading conditions,but also provides a strong theoretical foundation and engineering guidance for the constitutive modeling and parametric design of thermoplastic resin-based materials.
基金supported by Crosswise Tasks of Enterprise Entrusted(JG-ZH-A-202411-003)High-level Talents Program of Hainan Basic and Applied Basic Research Program of China(520RC543)。
文摘In order to research the concrete archaized buildings with lintel-column joint,2 specimens were tested under dynamic experiment.The failure characteristics,skeleton curves,mechanical behavior such as the load-displacement hysteretic loops,load carrying capacity,degradation of strength and stiffness,ductility and energy dissipation of the joints were analyzed.The results indicate that comparies with the lintel-column joints,the loading capacity and energy dissipation of the concrete archaized buildings with dual lintel-column joints are higher,and the hysteretic loops is in plump-shape.However,the displacement ductility coefficient is less than that of lintel-column joints.Both of them of the regularity of rigidity degeneration are basically the same.Generally,the joints have the good energy dissipation capacity.And the concrete archaized buildings with lintel-column joints exhibit excellent seismic behavior.
基金National Natural Science Foundation of China(50575054)973Program(2007CB607602)
文摘A rotor system supported by roller beatings displays very complicated nonlinear behaviors due to nonlinear Hertzian contact forces, radial clearances and bearing waviness. This paper presents nonlinear bearing forces of a roller bearing under four-dimensional loads and establishes 4-DOF dynamics equations of a rotor roller bearing system. The methods of Newmark-β and of Newton-Laphson are used to solve the nonlinear equations. The dynamics behaviors of a rigid rotor system are studied through the bifurcation, the Poincar è maps, the spectrum diagrams and the axis orbit of responses of the system. The results show that the system is liable to undergo instability caused by the quasi-periodic bifurcation, the periodic-doubling bifurcation and chaos routes as the rotational speed increases. Clearances, outer race waviness, inner race waviness, roller waviness, damping, radial forces and unbalanced forces-all these bring a significant influence to bear on the system stability. As the clearance increases, the dynamics behaviors become complicated with the number and the scale of instable regions becoming larger. The vibration frequencies induced by the roller bearing waviness and the orders of the waviness might cause severe vibrations. The system is able to eliminate non-periodic vibration by reasonable choice and optimization of the parameters.
文摘The quasi-static and dynamic tensile behaviors in electron beam welded（EBW） Ti-6Al-4V alloy were investigated at strain rates of 10-3 and 103 s-1,respectively,by materials test system（MTS） and reconstructive Hopkinson bars apparatus.The microstructures of the base metal（BM） and the welded metal（WM） were observed with optical microscope.The fracture characteristics of the BM and WM were characterized with scanning electronic microscope.In Ti-6Al-4V alloy joint,the flow stress of WM is higher than that of BM,while the fracture strain of WM is less than that of BM at strain rates of 103 and 10-3 s-1,respectively.The fracture strain of WM has apparent improvement when the strain rate rises from 10-3 to 103 s-1,while the fracture strain of BM almost has no change.At the same time,the fracture mode of WM alters from brittle to ductile fracture,which causes improvement of the fracture strain of WM.
基金This work was supported by the National Science Fund for Distinguished Young Scholars of China (No.50125312) andSpecial Funds for Major State Basic Research Projects (No.G1999064800).
文摘Dynamic rheological characteristics of polypropylene (PP) filled with ultra-fine full-vulcanized powdered rubber (UFPR) composed of styrene-butadiene copolymer were studied through dynamic rheological measurements on an Advanced Rheometric Expansion System (ARES). A specific viscoelastic phenomenon, i.e. 'the second plateau', appeared at low frequencies, and exhibits a certain dependence on the amount of rubber particles and the dispersion state in the matrix. This phenomenon is attributed to the formation of aggregation structure of rubber particles. The analyses of Cole-Cole diagrams of the dynamic viscoelastic functions suggest that the heterogeneity of the composites is enhanced on increasing both particle content and temperature.
基金Project(50639060) supported by the National Natural Science Foundation of ChinaProject(610103002) supported by the State Key Laboratory of Hydroscience and Engineering,Tsinghua University,China
文摘A series of centrifuge model tests of sandy slopes were conducted to study the dynamic behavior of pile-reinforced slopes subjected to various motions.Time histories of accelerations,bending moments and pile earth pressures were obtained during excitation of the adjusted El Centro earthquake and a cyclic motion.Under a realistic earthquake,the overall response of the pile-reinforced slope is lower than that of the non-reinforced slope.The histories of bending moments and dynamic earth pressures reach their maximums soon after shaking started and then remain roughly stable until the end of shaking.Maximum moments occur at the height of 3.5 m,which is the deeper section of the pile,indicating the interface between the active loading and passive resistance regions.The dynamic earth pressures above the slope base steadily increase with the increase of height of pile.For the model under cyclic input motion,response amplitudes at different locations in the slope are almost the same,indicating no significant response amplification.Both the bending moment and earth pressure increase gradually over a long period.
基金国家自然科学基金，Municipal Key Subject Program of Shanghai
文摘The radial symmetric motion problem was examined for a spherical shell composed of a class of imperfect incompressible hyper-elastic materials, in which the materials may be viewed as the homogeneous incompressible isotropic neo-Hookean material with radial perturbations. A second-order nonlinear ordinary differential equation that describes the radial motion of the inner surface of the shell was obtained. And the first integral of the equation was then carded out. Via analyzing the dynamical properties of the solution of the differential equation, the effects of the prescribed imperfection parameter of the material and the ratio of the inner and the outer radii of the underformed shell on the motion of the inner surface of the shell were discussed, and the corresponding numerical examples were carded out simultaneously. In particular, for some given parameters, it was proved that, there exists a positive critical value, and the motion of the inner surface with respect to time will present a nonlinear periodic oscillation as the difference between the inner and the outer presses does not exceed the critical value. However, as the difference exceeds the critical value, the motion of the inner surface with respect to time will increase infinitely. That is to say, the shell will be destroyed ultimately.
基金supported by the National Natural Science Foundation of China(No.11472179)
文摘The dynamic behavior of a bridge-erecting machine, carrying a moving mass suspended by a wire rope, is investigated. The bridge-erecting machine is modelled by a simply supported uniform beam, and a massless equivalent ＂spring-damper＂ system with an effective spring constant and an effective damping coefficient is used to model the moving mass suspended by the wire rope. The suddenly applied load is represented by a unitary Dirac Delta function. With the expansion method, a simple closed-form solution for the equation of motion with the replaced spring-damper-mass system is formulated. The characters of the rope are included in the derivation of the differential equation of motion for the system. The numerical examples show that the effects of the damping coefficient and the spring constant of the rope on the deflection have significant variations with the loading frequency. The effects of the damping coefficient and the spring constant under different beam lengths are also examined. The obtained results validate the presented approach, and provide significant references in the design process of bridgeerecting machines.
基金financially supported by the National Natural Science Foundation of China(Grant No.51679167 and 51979193)
文摘The marine risers are often subjected to parametric excitations from the fluctuation top tension. The top tension on the riser may fluctuate with multiple frequencies caused by irregular waves. In this paper, the influence between different frequency components in the top tension on the riser system is theoretically simulated and analyzed. With the Euler-Bernoulli beam theory, a dynamic model for the vibrations of the riser is established. The top tension is set as fluctuating with time and it has two different frequencies. The influences from the fluctuation amplitudes, circular frequencies and phase angles of these frequency components on the riser system are analyzed in detail. When these two frequencies are fluctuating in the stable regions, the riser system may become unstable because ω1+ω2≈2Ωn. The fluctuation amplitudes of these frequencies have little effect on the components of the vibration frequencies of the riser. For different phase angles, the stability and dynamic behaviors of the riser would be different.
基金the support of the National Natural Science Foundation of China(Grant Nos.51779264and 51408607)the Natural Science Foundation of Jiangsu Province(Grant No.BK20171399)+1 种基金the Hong Kong Scholars Program(Grant No.2016QNRC001)the Young Elite Scientist Sponsorship(Grant No.17-JCJQ-QT-021)
文摘Calcareous sand has distinct characteristics in comparison with silica sand, such as dynamic behavior at high strain rates(HSRs). This is closely related to pile driving, aircraft wheel loading and mining activities. To understand the response of calcareous sand at HSRs, a series of dynamic tests is performed using the split Hopkinson pressure bar(SHPB) with steel sleeve, including 6 validation tests of bar-against-bar and 16 comparative tests relevant to the relative density and strain rate of calcareous and silica sands.The apparent dynamic stiffness of calcareous sand is approximately 10% of that for silica sand due to different particle shapes and mineral compositions. The axial stress-strain response of silica sand is mainly governed by the deformation of individual grain and soil skeleton, and particle crushing. However, porous calcareous sand shows yielding and strain-hardening responses that are always followed by particle crushing. As the applied loading increases, the particle crushing of calcareous sand develops from local instability to whole breakage. Calcareous sand has lower viscous flow effects compared with silica sand at HSRs.
基金National Natural Science Foundation of China,Grant No.59895410
文摘The single-layer latticed cylindrical shell is one of the most widely adopted space-fl'amed structures.In this paper,free vibration properties and dynamic response to horizontal and vertical seismic waves of single-layer latticed cylindrical shells are analyzed by the finite element method using ANSYS software.In the numerical study,where hundreds of cases were analyzed,the parameters considered included rise-span ratio,length-span ratio,surface load and member section size.Moreover,to better define the actual behavior of single-layer latticed shells,the study is focused on the dynamic stress response to both axial forces and bending moments.Based on the numerical results,the effects of the parameters considered on the stresses are discussed and a modified seismic force coefficient method is suggested.In addition,some advice based on these research results is presented to help in the future design of such structures.
基金Supported by National Natural Science Foundation of China (No. 50638030)National Key Technologies R&D Program of China (No. 2006BAJ13B02).
文摘In order to reduce economic and life losses due to terrorism or accidental explosion threats, reinforced concrete （RC） slabs of buildings need to he designed or retrofitted to resist blast loading. In this paper the dynamic behavior of RC slabs under blast loading and its influencing factors are studied. The numerical model of an RC slab subjected to blast loading is established using the explicit dynamic analysis software. Both the strain rate effect and the damage accumulation are taken into account in the material model. The dynamic responses of the RC slab subjected to blast loading are analyzed, and the influence of concrete strength, thickness and reinforcement ratio on the behavior of the RC slab under blast loading is numerically investigated. Based on the numerical results, some principles for blast-resistant design and retrofitting are proposed to improve the behavior of the RC slab subjected to blast loading.
基金supported by the National Natural Science Foundation for Excellent Young Scholars of China(No.52222110)the Natural Science Foundation of Jiangsu Province(No.BK20211230).
文摘Coral reef limestone at different depositional depths and facies differ remarkably on the textural and mineralogical characteristics,owing to the complex sedimentary diagenesis.To explore the effects of pore structure and mineral composition associated with diagenetic variation on the mechanical behavior of reef limestone,a series of quasi-static and dynamic compression tests along with microscopic examinations were performed on the reef limestone at shallow and deep burial depths.It is revealed that the shallow reef limestone(SRL)is classified as a porous aragonite-type carbonate rock with high porosity(55.3±3.2)%and pore connectivity.In comparison,the deep reef limestone(DRL)is mainly composed of dense calcite-type calcium carbonate with low porosity(4.9±1.6)%and pore connectivity.The DRL strengthened and stiffened by the tight grain framework consistently displays much higher values of the dynamic compressive strength,elastic modulus,brittleness index,and specific energy absorption than those of the SRL.The gap between two types of limestone further increases with an increase in strain rate.It appears that the failure pattern of SRL is dominated by the inherent defects like weak bonding interfaces and growth lines,revealed by the intricate fracturing network and mixed failure.Likewise,although the preexisting megapores in DRL may affect the crack propagation on pore tips to a certain distance,it hardly alters the axial splitting failure of DRL under impacts.The stress wave propagation and attenuation in SRL is primarily controlled by the reflection and diffusion caused by plenty mesopores,as well as an energy dissipation in layer-wise pore collapse and adjacent grain crushing,while the stress wave in DRL is highly hinged on the insulation and diffraction induced by the isolated megapores.This process is accompanied by the energy dissipation behavior of inelastic deformation resulted from the pore-emanated microcracking.
