This paper proposes a novel low distortion high linearity CMOS bootstrapped switch, and the proposed switch can alleviate the nonlinear distortion of the on-resistance by eliminating first order signal-dependent varia...This paper proposes a novel low distortion high linearity CMOS bootstrapped switch, and the proposed switch can alleviate the nonlinear distortion of the on-resistance by eliminating first order signal-dependent variation of the overdrive voltage. Based on a 0.18 mm standard CMOS process, the simulation results show that at 100 MHz sampling clock frequency and 49 MHz input signal with 2Vpp, the proposed switch in differential mode has a Spurious-Free Dynamic Range(SFDR) of 90.1 dB.展开更多
Nonlinearity caused by the clock feed-through of a bootstrapped switch and its compensation techniques are analyzed. All kinds of clock feed-through compensation configurations and their drawbacks are also investigate...Nonlinearity caused by the clock feed-through of a bootstrapped switch and its compensation techniques are analyzed. All kinds of clock feed-through compensation configurations and their drawbacks are also investigated. It is pointed out that the delay path match of the clock boosting circuit is the critical factor that affects the effectiveness of clock feed-through compensation. Based on that, a new clock feed-through compensation configuration and corresponding bootstrapped switch are presented and designed optimally with the UMC mixed-mode/RF 0.18 μm 1P6M P-sub twin-well CMOS process by orientating and elaborately designing the switch MOSFETs that influence the delay path match of the clock boosting circuit. HSPICE simulation results show that the proposed clock feedthrough compensation configuration can not only enhance the sampling accuracy under variations of process, power supply voltage, temperature and capacitors but also decrease the even harmonic, high-order odd harmonic and THD on the whole effectively.展开更多
A 13bit,pipelined analog-to-digital converter （ADC） designed to achieve high linearity is described. The high linearity is realized by using the passive capacitor error-averaging technique to calibrate the capacitor...A 13bit,pipelined analog-to-digital converter （ADC） designed to achieve high linearity is described. The high linearity is realized by using the passive capacitor error-averaging technique to calibrate the capacitor mismatch error, a gain-boosting opamp to minimize the finite gain error and gain nonlinearity,a bootstrapping switch to reduce the switch on-resistor nonlinearity, and an anti-disturb design to reduce the noise from the digital supply. This ADC is implemented in 0.18μm CMOS technology and occupies a die area of 3.2mm^2 , including pads. Measured performance includes - 0.18/ 0.15LSB of differential nonlinearity, -0.35/0.5LSB of integral nonlinearity, 75.7dB of signal-to-noise plus distortion ratio （SNDR） and 90. 5 dBc of spurious-free dynamic range （SFDR） for 2.4MHz input at 2.5MS/s. At full speed conversion （5MS/s） and for the same 2.4MHz input, the measured SNDR and SFDR are 73.7dB and 83.9 dBc, respectively. The power dissipation including output pad drivers is 21mW at 2.5MS/s and 34mW at 5MS/s,both at 2.7V supply.展开更多
基金Supported by the National Natural Science Foundation of China(Grant No.61404043)Doctoral Program Foundation of Institutions of Higher Education of China(No.201201111-20008)Key Laboratory of Infrared Imaging Materials and Detectors,Shanghai Institute of Technical Physics,Chinese Academy of Sciences(No.IIMDKFJJ-13-06)
文摘This paper proposes a novel low distortion high linearity CMOS bootstrapped switch, and the proposed switch can alleviate the nonlinear distortion of the on-resistance by eliminating first order signal-dependent variation of the overdrive voltage. Based on a 0.18 mm standard CMOS process, the simulation results show that at 100 MHz sampling clock frequency and 49 MHz input signal with 2Vpp, the proposed switch in differential mode has a Spurious-Free Dynamic Range(SFDR) of 90.1 dB.
基金supported by the National Natural Science Foundation of China(No.60206006)the New Century Excellent Talents of Ministry of Education of China(No.NCET-05-0851)+1 种基金the Cultivation Fund of the Key Scientific and Technical Innovation Project,Ministry of Education of China Program(No.708083)the Applied Materials Innovation Fund(No.XA-AM-200701)
文摘Nonlinearity caused by the clock feed-through of a bootstrapped switch and its compensation techniques are analyzed. All kinds of clock feed-through compensation configurations and their drawbacks are also investigated. It is pointed out that the delay path match of the clock boosting circuit is the critical factor that affects the effectiveness of clock feed-through compensation. Based on that, a new clock feed-through compensation configuration and corresponding bootstrapped switch are presented and designed optimally with the UMC mixed-mode/RF 0.18 μm 1P6M P-sub twin-well CMOS process by orientating and elaborately designing the switch MOSFETs that influence the delay path match of the clock boosting circuit. HSPICE simulation results show that the proposed clock feedthrough compensation configuration can not only enhance the sampling accuracy under variations of process, power supply voltage, temperature and capacitors but also decrease the even harmonic, high-order odd harmonic and THD on the whole effectively.
文摘A 13bit,pipelined analog-to-digital converter （ADC） designed to achieve high linearity is described. The high linearity is realized by using the passive capacitor error-averaging technique to calibrate the capacitor mismatch error, a gain-boosting opamp to minimize the finite gain error and gain nonlinearity,a bootstrapping switch to reduce the switch on-resistor nonlinearity, and an anti-disturb design to reduce the noise from the digital supply. This ADC is implemented in 0.18μm CMOS technology and occupies a die area of 3.2mm^2 , including pads. Measured performance includes - 0.18/ 0.15LSB of differential nonlinearity, -0.35/0.5LSB of integral nonlinearity, 75.7dB of signal-to-noise plus distortion ratio （SNDR） and 90. 5 dBc of spurious-free dynamic range （SFDR） for 2.4MHz input at 2.5MS/s. At full speed conversion （5MS/s） and for the same 2.4MHz input, the measured SNDR and SFDR are 73.7dB and 83.9 dBc, respectively. The power dissipation including output pad drivers is 21mW at 2.5MS/s and 34mW at 5MS/s,both at 2.7V supply.
