It is highly attractive for the catalysts prepared from renewable materials and/or industrial by-products.Herein,lignosulfonate(LS)as the by-product in the papermaking industry was utilized to fabricate Sn-containing ...It is highly attractive for the catalysts prepared from renewable materials and/or industrial by-products.Herein,lignosulfonate(LS)as the by-product in the papermaking industry was utilized to fabricate Sn-containing organic-inorganic complexing catalysts(Sn(x)@LS)by a simple hydrothermal self-assembly process.The fabricated Sn(x)@LS played an excellent performance in the dehydration of xylose into furfural in the carbon tetrachloride(CTC)-water biphasic system,yielding 78.5%furfural at 180℃for 60 min.It was revealed that strong coordination between Sn4+and the phenolic hydroxyl groups of LS created a robust organic-inorganic skeleton(-Ar-O-Sn-O-Ar-),simultaneously generating potent Lewis acidic sites,and sulfonic acid groups of LS acted as Bronsted acidic sites.Gromacs simulations verified that CTC did not form hydrogen bonds with xylose,which may reduce xylose consumption.The CTC phase effectively extracted furfural,thereby preventing its side reactions throughout the entire process.In addition,Sn(x)@LS exhibited excellent cyclic stability in at least five reaction cycles with only a 5.0% decrease in furfural yield.Thus,this work will give a new window for the catalysts prepared from LS as the industrial by-products in the production of platform chemicals,which is a sustainable chemical conversion process.展开更多
Re-crosslinkable preformed particle gel(RPPG)has been considered to be one of the most promising gels for dealing with fracture and void space conduit(VSC)conformance problems.However,the dehydration of RPPG during it...Re-crosslinkable preformed particle gel(RPPG)has been considered to be one of the most promising gels for dealing with fracture and void space conduit(VSC)conformance problems.However,the dehydration of RPPG during its propagation in the fracture-type features and its effect on gel properties remains unclear.This paper investigates the dehydration behavior during RPPG propagating in an open fracture using matrix-free fracture model.Then the results were verified using real fractured sandstone core model.Moreover,the gel properties after extruding a fracture were studied in detail including gel dehydration and gel strength.Results reveal that the RPPG properties changed significantly with increasing propagation distance,which correlated with the gel injection rate.At high gel injection rates,the dehydration and gel strength(Gʹ)decrease with increasing propagation distance.In contrast,the opposite result was found at low injection rates.Based on the study of the different gel injection rates,it is found that dehydration time is another key factor affecting dehydration behavior.Results also indicate that the fracture width affects gel dehydration at different locations.Dehydration was more pronounced at narrow fractures but only in the inlet section,while in the outlet section,RPPG contains more water than the initial condition.This study has profound implications for field applications.It provides new insights into the transport of RPPG in fractures and helps field engineers to optimize the gel injection operations.展开更多
The hard-to-remove lattice water has been regarded as a significant obstacle impeding the practical use of Prussian blue analogue cathodes for sodium-ion batteries.This work monitored the electrochemical evolution of ...The hard-to-remove lattice water has been regarded as a significant obstacle impeding the practical use of Prussian blue analogue cathodes for sodium-ion batteries.This work monitored the electrochemical evolution of a hydrated monoclinic sodium manganese hexacyanoferrate cathode by solid-state nuclear magnetic resonance(NMR).For the first time,we established a correlation between the chemical shifts of ^(23)Na NMR signals and the presence or absence of lattice water within this cathode.Through this method,we verified the electrochemical dehydration process that coincides with the merging of two redox platforms and a phase transformation in the initial cycles.Furthermore,we discovered that the lattice water is completely removed after several-day cell rest following a single activation cycle.展开更多
Although soil exhibits excellent mechanical performance,the microstructural changes of biopolymer within soil due to dehydration and rehydration are rarely explored.This study aims to explore xanthan gum soil microstr...Although soil exhibits excellent mechanical performance,the microstructural changes of biopolymer within soil due to dehydration and rehydration are rarely explored.This study aims to explore xanthan gum soil microstructure and strength behavior under different dehydration and rehydration degrees using nuclear magnetic resonance(NMR)and unconfined compressive strength tests.The results showed that the proportion of large-volume biopolymer gel within the sample decreased from 91.91%to 38.28%during dehydration,but increased to 90.44%upon rehydration when sample moisture returned to its original level.The NMR images revealed that biopolymer gel evaporated from outside during the dehydration process,causing the dehydrated biopolymer to shrink and form a high-strength glass,which directly enhanced the soil's macroscopic mechanical properties.Upon rehydration,the biopolymer reabsorbed moisture and gradually expanded,leading to weakened connections between soil particles and a decrease in strength.Therefore,even when the moisture content of soil remained constant during the dehydration and rehydration processes,their unconfined compressive strength(UCS)and failure patterns exhibited significant differences.Both the UCS and NMR signal of biopolymer-treated soil decreased after the first dehydration and rehydration cycle,stabilizing gradually after subsequent cycles.展开更多
In this context,the present study proposes the use of microwave irradiation to improve the dehydration rate and efficiency of strontium hydroxide octahydrate(Sr(OH)_(2)·8H_(2)O)without introducing contaminants.Th...In this context,the present study proposes the use of microwave irradiation to improve the dehydration rate and efficiency of strontium hydroxide octahydrate(Sr(OH)_(2)·8H_(2)O)without introducing contaminants.This study revealed that the use of microwave irradiation to dehydrate Sr(OH)_(2)·8H_(2)O is feasible and surprisingly efficient.The effects of this approach on important parameters were investigated using response surface methodology(RSM).The results revealed that the microwave dehydration process follows a linear polynomial model.In addition,compared with the heating time and material thickness,the microwave-assisted dehydration of Sr(OH)_(2)·8H_(2)O is sensitive to the microwave power and not to the material mass.The relative dehydration percentage reached 99.99%when heated in a microwave oven at 950Wfor just 3 min.In contrast,a relative dehydration percentage of 94.6%was reached when heated in an electric furnace at 180℃for 120 min.The XRD spectra also revealed that most of the Sr(OH)_(2)·8H_(2)O transformed into Sr(OH)_(2)after dehydration via microwave irradiation,whereas a significant portion of the Sr(OH)_(2)·H_(2)O remained after conventional electric dehydration.The experimental data were fitted and analyzed via the thin-layer drying dynamics model,and the results indicated that the dehydrating behavior of Sr(OH)_(2)·8H_(2)O could be well described by the Page model.展开更多
The chlorophyll fluorescence kinetics of marine red alga Grateloupia turutunt Yamada, green alga Ulva pertusa Kjellm and brown alga Laminaria japonica Aresch during natural sustained dehydration were monitored and inv...The chlorophyll fluorescence kinetics of marine red alga Grateloupia turutunt Yamada, green alga Ulva pertusa Kjellm and brown alga Laminaria japonica Aresch during natural sustained dehydration were monitored and investigated. The pulse amplified modulation (PAM) system was used to analyze the distinct fluorescence parameters during thallus dehydration. Results proved that the fluorescence kinetics of different seaweed all showed three patterns of transformation with sustained water loss. These were: 1) peak kinetic pattern (at the early stage of dehydration fluorescence enhanced and quenched subsequently, representing a normal physiological state). 2) plateau kinetic pattern (with sustained water loss fluorescence enhanced continuously but quenching became slower, finally reaching its maximum). 3) Platform kinetic pattern (fluorescence fell and the shape of kinetic curve was similar to plateau kinetic pattern). A critical water content (CWC) could be found and defined as the percentage of water content just prior to the fluorescence drop and to be a significant physiological index for evaluation of plant drought tolerance. Once thallus water content became lower than this value the normal peak pattern can not be recovered even through rehydration, indicating an irreversible damage to the thylakoid membrane. The CWC value corresponding to different marine species were varied and negatively correlated with their desiccation tolerance, for example. Laminaria japonica had the highest CWC value (around 90%) and the lowest dehydration tolerance of the three. In addition, a fluorescence 'burst' was found only in red algae during rehydration. The different fluorescence parameters F-o, F-v and F-v, F-m were measured and compared during water loss. Both F-o and F-v increased in the first stage of dehydration but F-v/F-m. kept almost constant. So the immediate response of in vivo chlorophyll fluorescence to dehydration was an enhancement. Later with sustained dehydration F-o increased continuously while F-v decreased and tended to become smaller and smaller. The major changes in fluorescence (including fluorescence drop during dehydration and the burst during rehydration) were all attributed to the change in F-o instead of F-v This significance of F-o indicates that it is necessary to do more research on F-o as well as on its relationship with the state of thylakoid membrane.展开更多
The single phase La2（CO3）3·3.4H2 O was synthesized by hydrothermal method. The thermal decomposition and intermediates and final solid products of La2（CO3）3·3.4H2O from 30 to 1000 °C were characteri...The single phase La2（CO3）3·3.4H2 O was synthesized by hydrothermal method. The thermal decomposition and intermediates and final solid products of La2（CO3）3·3.4H2O from 30 to 1000 °C were characterized by XRD, FTIR and DTA-TG. The kinetics of dehydration of La2（CO3）3·3.4H2O in the temperature range of 30-366 °C was investigated under non-isothermal conditions. Flynn-Wall-Ozawa and Friedman isoconversion methods were used to calculate the activation energy and analyze the reaction steps; multivariate non-linear regression program was applied to determine the most probable mechanism and the kinetic parameters. The results show that the thermal dehydration of La2（CO3）3·3.4H2O is a kind of three-step competitive reaction, and controlled by an n-order initial reaction followed by n-order competitive reaction（FnFnFn model）. The activation energy matching with the most probable model is close to value obtained by Friedman method. The fitting curves match the original TG-DTG curves very well.展开更多
[Objective] The aim was to study on the chlorella resistance to dehydration conditions and effect of different cryoprotecants on drying of chlorella cells.[Method]The protection effect of seven kinds of cryoprotecants...[Objective] The aim was to study on the chlorella resistance to dehydration conditions and effect of different cryoprotecants on drying of chlorella cells.[Method]The protection effect of seven kinds of cryoprotecants on chlorella cells was analyzed.[Result]The protection effect of trehalose on chlorella cells was the best,and the survival rate of chlorella cells had improved by 50% with the applied trehalose concentration of 5%.[Conclusion]The result in this study had important guidance effect on the mutation breeding of chlorella.展开更多
Iron exchanged ZSM-5 with Si/Al ratio from 25 to 300 prepared by three consecutive ion exchanges was used for the dehydration of ethanol to ethylene.The iron exchanged ZSM-5（Si/Al=25） catalyst with an iron content o...Iron exchanged ZSM-5 with Si/Al ratio from 25 to 300 prepared by three consecutive ion exchanges was used for the dehydration of ethanol to ethylene.The iron exchanged ZSM-5（Si/Al=25） catalyst with an iron content of 0.46 wt%gave 97%-99%yield of ethylene at 98%-99%conversion of ethanol at 260℃ and 0.81 h^-1 liquid hourly space velocity.The high performance was maintained for60 d on-stream.X-ray diffraction,Fourier transform infrared spectroscopy of pyridine adsorption,NH3 temperature-programmed desorption and diffuse reflectance UV-vis spectroscopy were used for catalyst characterization.Ion exchange with iron decreased the total acidity of the zeolite,especially the strong acid sites and Bronsted acid sites.The doped iron species were distributed over Fe-ZSM-5 as predominantly isolated Fe^3＋.Therefore,the catalytic performance for ethanol dehydration to ethylene was improved.展开更多
Various ZSM-5 zeolites modified with alkali metals （Li, Na, K, Rb, and Cs） were prepared using ion exchange. The catalysts were used to enhance the catalytic dehydration of lactic acid （LA） to acrylic acid （AA）....Various ZSM-5 zeolites modified with alkali metals （Li, Na, K, Rb, and Cs） were prepared using ion exchange. The catalysts were used to enhance the catalytic dehydration of lactic acid （LA） to acrylic acid （AA）. The effects of cationic species on the structures and surface acid-base distributions of the ZSM-5 zeolites were investigated. The important factors that affect the catalytic performance were also identified. The modified ZSM-5 catalysts were characterized using X-ray diffraction, tempera- ture-programmed desorptions of NH3 and CO2, pyridine adsorption spectroscopy, and N2 adsorption to determine the crystal phase structures, surface acidities and basicities, nature of acid sites, specific surface areas, and pore volumes. The results show that the acid-base sites that are adjusted by alkali-metal species, particularly weak acid-base sites, are mainly responsible for the formation of AA. The KZSM-5 catalyst, in particular, significantly improved LA conversion and AA selectivity because of the synergistic effect of weak acid-base sites. The reaction was conducted at different reaction temperatures and liquid hourly space velocities （LHSVs） to understand the catalyst selectivity for AA and trends in byproduct formation. Approximately 98% LA conversion and 77% AA selectivity were achieved using the KZSM-5 catalyst under the optimum conditions （40 wt% LA aqueous solution, 365 ℃, and LHSV 2 h-1）.展开更多
Formic acid （HCOOH） decomposition at Pt film electrode has been studied by electrochem- ical in situ FTIR spectroscopy under attenuated-total-reflection configuration, in order to clarify whether bridge-bonded forma...Formic acid （HCOOH） decomposition at Pt film electrode has been studied by electrochem- ical in situ FTIR spectroscopy under attenuated-total-reflection configuration, in order to clarify whether bridge-bonded formate （HCOOD） is the reactive intermediate for COad for-mation from HCOOH molecules. When switching from HCOOH-free solution to HCOOH- containing solution at constant potential （E=0.4 V vs. RHE）, we found that immediately upon solution switch COad formation rate is the highest, while surface coverage of formate is zero, then after COad formation rate decreases, while formate coverage reaches a steady state coverage quickly within ca. 1 s. Potential step experiment from E=0.75 V to 0.35 V, reveals that formate band intensity drops immediately right after the potential step, while the COad signal develops slowly with time. Both facts indicate that formate is not the reactive intermediate for formic acid dehydration to CO.展开更多
Pervaporation(including vapor permeation) is a kind of new membrane separation technology, possessing the advantages of high efficiency, energy saving and convenient operation. It has promising application in the sepa...Pervaporation(including vapor permeation) is a kind of new membrane separation technology, possessing the advantages of high efficiency, energy saving and convenient operation. It has promising application in the separation and purification of organic solvents. Dehydration is an important step in the production and recovery of organic solvents. Zeolite membranes have attracted wide attention for pervaporation dehydration due to their high separation performance and good thermal/chemical stability. So far, zeolite membranes have been preliminarily industrialized for dehydration of organic solvents. This paper reviews the recent development of zeolite membranes for pervaporation dehydration, including mass transfer models, preparation and applications of zeolite membranes. The review also discusses the current industrial applications of zeolite membranes and their future development in pervaporation.展开更多
This paper compares three methods for natural gas dehydration that are widely applied in industry：（1） absorption by triethylene glycol, （2） adsorption on solid desiccants and （3） condensation. A comparison is m...This paper compares three methods for natural gas dehydration that are widely applied in industry：（1） absorption by triethylene glycol, （2） adsorption on solid desiccants and （3） condensation. A comparison is made according to their energy demand and suitability for use. The energy calculations are performed on a model where 105 Nm3/h water saturated natural gas is processed at 30 °C. The pressure of the gas varies from 7 to 20 MPa. The required outlet concentration of water in natural gas is equivalent to the dew point temperature of -10 °C at gas pressure of 4 MPa.展开更多
A series of nanocrystalline γ-alumina are synthesized by different procedures, namely, thermal decomposition method （sample A）, precipita-tion method （sample B） and sol-gel method using sucrose and hexadecyltrime...A series of nanocrystalline γ-alumina are synthesized by different procedures, namely, thermal decomposition method （sample A）, precipita-tion method （sample B） and sol-gel method using sucrose and hexadecyltrimethyl ammonium bromide （CTAB） as templates （samples C and D, respectively）. Textural and acidic properties of γ-alumina samples are characterized by XRD, N2 adsorption-desorption and NH3-TPD techniques. Vapor-phase dehydration of methanol into dimethyl ether is carried out over these samples. Among them, sample C shows the highest catalytic activity. NH3-TPD analysis reveals that the sample with smaller crystallite size possesses higher concentration of medium acidic sites and consequently higher catalytic activity. Thermal decomposition method leads to decrease in both surface area and moderate acidity, therefore it is the cause of lower catalytic activity.展开更多
Dehydrating large amounts of sludge produced by sewage treatment plants is difficult.Microwave pretreatment can effectively and significantly improve the dewaterability and hydrogen production of sludge subjected to a...Dehydrating large amounts of sludge produced by sewage treatment plants is difficult.Microwave pretreatment can effectively and significantly improve the dewaterability and hydrogen production of sludge subjected to anaerobic digestion. The aim of this study was to investigate the effects of different microwave conditions on hydrogen production from anaerobic digestion and dewaterability of sludge. Based on an analysis of the electric field distribution, a spiral reactor was designed and a continuous microwave system was built to conduct intermittent and continuous experiments under different conditions. Settling Volume, Capillary Suction Time, particle size, and moisture content of the sludge were measured. The results show that sludge pretreatment in continuous experiments has equally remarkable dehydration performance as in intermittent experiments; the minimum moisture content was 77.29% in the intermittent experiment under a microwave power of 300 W and an exposure time of 60 sec, and that in the continuous experiment was 77.56% under a microwave power of 400 W and an exposure time of 60 sec.The peak measured by Differential Scanning Calorimeter appeared earliest under a microwave power of 600 W and an exposure time of 180 sec. The heat flux at the peak was 4.343 W/g, which is relatively small. This indicates that microwave pretreatment induced desirable effects. The maximum yield of hydrogen production was 7.967% under the conditions of microwave power of 500 W, exposure time of 120 sec, and water bath at 55℃. This research provides a theoretical and experimental basis for the development of a continuous microwave sludge-conditioning system.展开更多
Micro-mesoporous composite molecular sieves H-ZSM-5/MCM-41 were prepared by the hydrothermal technique with alkali-treated H-ZSM-5zeolite as the source and characterized by scanning electron microscopy,transmission el...Micro-mesoporous composite molecular sieves H-ZSM-5/MCM-41 were prepared by the hydrothermal technique with alkali-treated H-ZSM-5zeolite as the source and characterized by scanning electron microscopy,transmission electron microscopy,energy dispersive spectroscopy,X-ray diffraction,N2 adsorption-desorption measurement and NH3 temperature-programmed desorption.The catalytic performances for the methanol dehydration to dimethyl ether over H-ZSM-5/MCM-41 were evaluated.Among these catalysts,H-ZSM-5/MCM-41 prepared with NaOH dosage (nNa/nSi) varying from 0.4 to 0.47 presented excellent catalytic activity with more than 80%methanol conversion and 100%dimethyl ether selectivity in a wide temperature range of 170—300℃,and H-ZSM-5/MCM-41 prepared with nNa/nSi=0.47 showed constant methanol conversion of about 88.7%,100% dimethyl ether selectivity and excellent lifetime at 220℃.The excellent catalytic performances were due to the highly active and uniform acidic sites and the hierarchical porosity in the micro-mesoporous composite molecular sieves.The catalytic mechanism of H-ZSM-5/MCM-41 for the methanol dehydration to dimethyl ether process was also discussed.展开更多
A new type of dehydration unit for natural gas was briefly described and its basic structure and working principles were presented. An indoor test rig for testing the unit performance was set up and the experimental r...A new type of dehydration unit for natural gas was briefly described and its basic structure and working principles were presented. An indoor test rig for testing the unit performance was set up and the experimental results were given. The results showed that the unit could attain a maximum dew point depression of about 20℃ without any need of external mechanical power and chemicals. The pressure loss ratio, shock wave and the flow rate had great influence on the dehydration characteristics. From the systematic analysis of the factors that affect the dehydration efficiency of the unit, the suggestions for improving the unit are put forward.展开更多
Zeolite membranes offer outstanding potentials in separation of many molecular mixtures due to their molecular sieving selectivity and the high thermal and mechanical stability that allow them to operate at harsh cond...Zeolite membranes offer outstanding potentials in separation of many molecular mixtures due to their molecular sieving selectivity and the high thermal and mechanical stability that allow them to operate at harsh conditions.Development of durable and high separation performance membranes with lower fabrication and operation cost are highly demanded for industrial applications. Zeolite T membrane possesses good acid-resistance with excellent hydrophilic properties as compared to NaA zeolite membrane and can be extended to industrial organic dehydrations under an acidic environment. In the present review the research advances in development of zeolite T membranes for the dehydration of organic mixtures in acidic conditions are summarized. Especially the low temperature synthesis, and epitaxial growth of the zeolite membrane with high performance are well addressed, besides emphasis is particularly placed on ensemble synthesis of hollow fiber zeolite T membrane module and its future prospects for industrial separations.展开更多
In this paper, the effect of acidity of zeolites with FER framework was studied in the methanol dehydration to dimethyl ether reaction, by comparing catalysts with different Si/Al ratios(namely 8, 30 and60). The aim o...In this paper, the effect of acidity of zeolites with FER framework was studied in the methanol dehydration to dimethyl ether reaction, by comparing catalysts with different Si/Al ratios(namely 8, 30 and60). The aim of this work was to investigate how the acid sites concentration, strength, distribution and typology(Br?nsted and Lewis) affect methanol conversion, DME selectivity and coke formation. It was found that the aluminium content affects slightly acid sites strength whilst a relevant effect on acid sites concentration and distribution(Br?nsted/Lewis) was observed as 24% of Lewis sites were found on Alrichest samples, whilst less than 10% of Lewis acid sites were observed on FER at higher Si/Al ratio. All the investigated catalyst samples showed a selectivity toward DME always greater than 0.9 and samples with the lowest Si/Al ratio exhibit the best performances in terms of methanol conversion, approaching the theoretical equilibrium value(around 0.85) at temperatures below 200 °C. Turnover-frequency analysis suggests that this result seems to be related not only to the higher amount of acid sites but also that the presence of Lewis acid sites may play a significant role in converting methanol. On the other hand, the presence of Lewis acid sites, combined with a high acidity, promote the formation of by-products(mainly methane) and coke deposition during the reaction. As final evidence, all the investigated catalysts exhibit very high resistance to deactivation by coke deposition, over 60 h continuous test, and a GC–MS analysis of the coke deposited on the catalyst surface reveals tetra-methyl benzene as main component.展开更多
Phosphoric acid treated niobic acid(NbP)was used for the dehydration of xylose to furfural in biphasic solvent system,which was found to exhibit the best performance among the tested catalysts.The excellent performanc...Phosphoric acid treated niobic acid(NbP)was used for the dehydration of xylose to furfural in biphasic solvent system,which was found to exhibit the best performance among the tested catalysts.The excellent performance of NbP could be explained by the better synergistic cooperation between Bro¨nsted and Lewis acid sites.Moreover,NbP showed good stability and no obvious deactivation or leaching of Nb could be observed after six continuous recycles.展开更多
基金supported by theNationalNatural Science Foundation of China(No.22361132543)China Postdoctoral Science Foundation(Pre-Station)(No.2023TQ0121)State Key Laboratory of Pulp and Paper Engineering(No.2024ZD05).
文摘It is highly attractive for the catalysts prepared from renewable materials and/or industrial by-products.Herein,lignosulfonate(LS)as the by-product in the papermaking industry was utilized to fabricate Sn-containing organic-inorganic complexing catalysts(Sn(x)@LS)by a simple hydrothermal self-assembly process.The fabricated Sn(x)@LS played an excellent performance in the dehydration of xylose into furfural in the carbon tetrachloride(CTC)-water biphasic system,yielding 78.5%furfural at 180℃for 60 min.It was revealed that strong coordination between Sn4+and the phenolic hydroxyl groups of LS created a robust organic-inorganic skeleton(-Ar-O-Sn-O-Ar-),simultaneously generating potent Lewis acidic sites,and sulfonic acid groups of LS acted as Bronsted acidic sites.Gromacs simulations verified that CTC did not form hydrogen bonds with xylose,which may reduce xylose consumption.The CTC phase effectively extracted furfural,thereby preventing its side reactions throughout the entire process.In addition,Sn(x)@LS exhibited excellent cyclic stability in at least five reaction cycles with only a 5.0% decrease in furfural yield.Thus,this work will give a new window for the catalysts prepared from LS as the industrial by-products in the production of platform chemicals,which is a sustainable chemical conversion process.
文摘Re-crosslinkable preformed particle gel(RPPG)has been considered to be one of the most promising gels for dealing with fracture and void space conduit(VSC)conformance problems.However,the dehydration of RPPG during its propagation in the fracture-type features and its effect on gel properties remains unclear.This paper investigates the dehydration behavior during RPPG propagating in an open fracture using matrix-free fracture model.Then the results were verified using real fractured sandstone core model.Moreover,the gel properties after extruding a fracture were studied in detail including gel dehydration and gel strength.Results reveal that the RPPG properties changed significantly with increasing propagation distance,which correlated with the gel injection rate.At high gel injection rates,the dehydration and gel strength(Gʹ)decrease with increasing propagation distance.In contrast,the opposite result was found at low injection rates.Based on the study of the different gel injection rates,it is found that dehydration time is another key factor affecting dehydration behavior.Results also indicate that the fracture width affects gel dehydration at different locations.Dehydration was more pronounced at narrow fractures but only in the inlet section,while in the outlet section,RPPG contains more water than the initial condition.This study has profound implications for field applications.It provides new insights into the transport of RPPG in fractures and helps field engineers to optimize the gel injection operations.
基金supported by grants from the National Natural Science Foundation of China(No.22272055)Scientific and Technological Project of Henan Province(No.222102240081)+1 种基金Science and Technology Planning Project of Anyang City(No.2022C01GX023)the support from Shanghai Synchrotron Radiation Facility(BL14B)for the sXRD experiments.
文摘The hard-to-remove lattice water has been regarded as a significant obstacle impeding the practical use of Prussian blue analogue cathodes for sodium-ion batteries.This work monitored the electrochemical evolution of a hydrated monoclinic sodium manganese hexacyanoferrate cathode by solid-state nuclear magnetic resonance(NMR).For the first time,we established a correlation between the chemical shifts of ^(23)Na NMR signals and the presence or absence of lattice water within this cathode.Through this method,we verified the electrochemical dehydration process that coincides with the merging of two redox platforms and a phase transformation in the initial cycles.Furthermore,we discovered that the lattice water is completely removed after several-day cell rest following a single activation cycle.
基金supported by the National Natural Science Foundation of China(Grant No.42102324)the Natural Science Foundation of Hubei Province of China(Grant No.2024AFB686)Open Fund of Badong National Observation and Research Station of Geohazards(Grant No.BNORSG-202102).
文摘Although soil exhibits excellent mechanical performance,the microstructural changes of biopolymer within soil due to dehydration and rehydration are rarely explored.This study aims to explore xanthan gum soil microstructure and strength behavior under different dehydration and rehydration degrees using nuclear magnetic resonance(NMR)and unconfined compressive strength tests.The results showed that the proportion of large-volume biopolymer gel within the sample decreased from 91.91%to 38.28%during dehydration,but increased to 90.44%upon rehydration when sample moisture returned to its original level.The NMR images revealed that biopolymer gel evaporated from outside during the dehydration process,causing the dehydrated biopolymer to shrink and form a high-strength glass,which directly enhanced the soil's macroscopic mechanical properties.Upon rehydration,the biopolymer reabsorbed moisture and gradually expanded,leading to weakened connections between soil particles and a decrease in strength.Therefore,even when the moisture content of soil remained constant during the dehydration and rehydration processes,their unconfined compressive strength(UCS)and failure patterns exhibited significant differences.Both the UCS and NMR signal of biopolymer-treated soil decreased after the first dehydration and rehydration cycle,stabilizing gradually after subsequent cycles.
基金supported by the Research Program of the Science and Technology Department of Guizhou Province(Qiankehe Jichu[2019]1418)the Research Program of Talented Scholars of Guizhou Institute of Technology(XJGC20190965).
文摘In this context,the present study proposes the use of microwave irradiation to improve the dehydration rate and efficiency of strontium hydroxide octahydrate(Sr(OH)_(2)·8H_(2)O)without introducing contaminants.This study revealed that the use of microwave irradiation to dehydrate Sr(OH)_(2)·8H_(2)O is feasible and surprisingly efficient.The effects of this approach on important parameters were investigated using response surface methodology(RSM).The results revealed that the microwave dehydration process follows a linear polynomial model.In addition,compared with the heating time and material thickness,the microwave-assisted dehydration of Sr(OH)_(2)·8H_(2)O is sensitive to the microwave power and not to the material mass.The relative dehydration percentage reached 99.99%when heated in a microwave oven at 950Wfor just 3 min.In contrast,a relative dehydration percentage of 94.6%was reached when heated in an electric furnace at 180℃for 120 min.The XRD spectra also revealed that most of the Sr(OH)_(2)·8H_(2)O transformed into Sr(OH)_(2)after dehydration via microwave irradiation,whereas a significant portion of the Sr(OH)_(2)·H_(2)O remained after conventional electric dehydration.The experimental data were fitted and analyzed via the thin-layer drying dynamics model,and the results indicated that the dehydrating behavior of Sr(OH)_(2)·8H_(2)O could be well described by the Page model.
文摘The chlorophyll fluorescence kinetics of marine red alga Grateloupia turutunt Yamada, green alga Ulva pertusa Kjellm and brown alga Laminaria japonica Aresch during natural sustained dehydration were monitored and investigated. The pulse amplified modulation (PAM) system was used to analyze the distinct fluorescence parameters during thallus dehydration. Results proved that the fluorescence kinetics of different seaweed all showed three patterns of transformation with sustained water loss. These were: 1) peak kinetic pattern (at the early stage of dehydration fluorescence enhanced and quenched subsequently, representing a normal physiological state). 2) plateau kinetic pattern (with sustained water loss fluorescence enhanced continuously but quenching became slower, finally reaching its maximum). 3) Platform kinetic pattern (fluorescence fell and the shape of kinetic curve was similar to plateau kinetic pattern). A critical water content (CWC) could be found and defined as the percentage of water content just prior to the fluorescence drop and to be a significant physiological index for evaluation of plant drought tolerance. Once thallus water content became lower than this value the normal peak pattern can not be recovered even through rehydration, indicating an irreversible damage to the thylakoid membrane. The CWC value corresponding to different marine species were varied and negatively correlated with their desiccation tolerance, for example. Laminaria japonica had the highest CWC value (around 90%) and the lowest dehydration tolerance of the three. In addition, a fluorescence 'burst' was found only in red algae during rehydration. The different fluorescence parameters F-o, F-v and F-v, F-m were measured and compared during water loss. Both F-o and F-v increased in the first stage of dehydration but F-v/F-m. kept almost constant. So the immediate response of in vivo chlorophyll fluorescence to dehydration was an enhancement. Later with sustained dehydration F-o increased continuously while F-v decreased and tended to become smaller and smaller. The major changes in fluorescence (including fluorescence drop during dehydration and the burst during rehydration) were all attributed to the change in F-o instead of F-v This significance of F-o indicates that it is necessary to do more research on F-o as well as on its relationship with the state of thylakoid membrane.
基金Project(201011005-5)supported by the National Land and Resources Public Welfare Scientific Research Project of ChinaProject(41030426)supported by the National Natural Science Foundation of China+1 种基金Project(20095122110015)supported by Specialized Research Fund for the Doctoral Program of Higher Education of ChinaProject(2010-32)supported by Scientific Research Foundation of the Education Ministry for Returned Chinese Scholars,China
文摘The single phase La2（CO3）3·3.4H2 O was synthesized by hydrothermal method. The thermal decomposition and intermediates and final solid products of La2（CO3）3·3.4H2O from 30 to 1000 °C were characterized by XRD, FTIR and DTA-TG. The kinetics of dehydration of La2（CO3）3·3.4H2O in the temperature range of 30-366 °C was investigated under non-isothermal conditions. Flynn-Wall-Ozawa and Friedman isoconversion methods were used to calculate the activation energy and analyze the reaction steps; multivariate non-linear regression program was applied to determine the most probable mechanism and the kinetic parameters. The results show that the thermal dehydration of La2（CO3）3·3.4H2O is a kind of three-step competitive reaction, and controlled by an n-order initial reaction followed by n-order competitive reaction（FnFnFn model）. The activation energy matching with the most probable model is close to value obtained by Friedman method. The fitting curves match the original TG-DTG curves very well.
基金Support by a Grant from the Major State Basic Research Development Program of China(973 Program,2009CB724702)Science Foundation of Nanjing Industry University(39708010)~~
文摘[Objective] The aim was to study on the chlorella resistance to dehydration conditions and effect of different cryoprotecants on drying of chlorella cells.[Method]The protection effect of seven kinds of cryoprotecants on chlorella cells was analyzed.[Result]The protection effect of trehalose on chlorella cells was the best,and the survival rate of chlorella cells had improved by 50% with the applied trehalose concentration of 5%.[Conclusion]The result in this study had important guidance effect on the mutation breeding of chlorella.
基金supported by the National Natural Science Foundation of China(21376068)the China Postdoctoral Science Foundation(2016M592424)~~
文摘Iron exchanged ZSM-5 with Si/Al ratio from 25 to 300 prepared by three consecutive ion exchanges was used for the dehydration of ethanol to ethylene.The iron exchanged ZSM-5（Si/Al=25） catalyst with an iron content of 0.46 wt%gave 97%-99%yield of ethylene at 98%-99%conversion of ethanol at 260℃ and 0.81 h^-1 liquid hourly space velocity.The high performance was maintained for60 d on-stream.X-ray diffraction,Fourier transform infrared spectroscopy of pyridine adsorption,NH3 temperature-programmed desorption and diffuse reflectance UV-vis spectroscopy were used for catalyst characterization.Ion exchange with iron decreased the total acidity of the zeolite,especially the strong acid sites and Bronsted acid sites.The doped iron species were distributed over Fe-ZSM-5 as predominantly isolated Fe^3＋.Therefore,the catalytic performance for ethanol dehydration to ethylene was improved.
文摘Various ZSM-5 zeolites modified with alkali metals （Li, Na, K, Rb, and Cs） were prepared using ion exchange. The catalysts were used to enhance the catalytic dehydration of lactic acid （LA） to acrylic acid （AA）. The effects of cationic species on the structures and surface acid-base distributions of the ZSM-5 zeolites were investigated. The important factors that affect the catalytic performance were also identified. The modified ZSM-5 catalysts were characterized using X-ray diffraction, tempera- ture-programmed desorptions of NH3 and CO2, pyridine adsorption spectroscopy, and N2 adsorption to determine the crystal phase structures, surface acidities and basicities, nature of acid sites, specific surface areas, and pore volumes. The results show that the acid-base sites that are adjusted by alkali-metal species, particularly weak acid-base sites, are mainly responsible for the formation of AA. The KZSM-5 catalyst, in particular, significantly improved LA conversion and AA selectivity because of the synergistic effect of weak acid-base sites. The reaction was conducted at different reaction temperatures and liquid hourly space velocities （LHSVs） to understand the catalyst selectivity for AA and trends in byproduct formation. Approximately 98% LA conversion and 77% AA selectivity were achieved using the KZSM-5 catalyst under the optimum conditions （40 wt% LA aqueous solution, 365 ℃, and LHSV 2 h-1）.
文摘Formic acid （HCOOH） decomposition at Pt film electrode has been studied by electrochem- ical in situ FTIR spectroscopy under attenuated-total-reflection configuration, in order to clarify whether bridge-bonded formate （HCOOD） is the reactive intermediate for COad for-mation from HCOOH molecules. When switching from HCOOH-free solution to HCOOH- containing solution at constant potential （E=0.4 V vs. RHE）, we found that immediately upon solution switch COad formation rate is the highest, while surface coverage of formate is zero, then after COad formation rate decreases, while formate coverage reaches a steady state coverage quickly within ca. 1 s. Potential step experiment from E=0.75 V to 0.35 V, reveals that formate band intensity drops immediately right after the potential step, while the COad signal develops slowly with time. Both facts indicate that formate is not the reactive intermediate for formic acid dehydration to CO.
基金Supported by the National Natural Science Foundation of China(21490585,21606126)National High-tech R&D Program of China(2015AA03A602)a project funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)
文摘Pervaporation(including vapor permeation) is a kind of new membrane separation technology, possessing the advantages of high efficiency, energy saving and convenient operation. It has promising application in the separation and purification of organic solvents. Dehydration is an important step in the production and recovery of organic solvents. Zeolite membranes have attracted wide attention for pervaporation dehydration due to their high separation performance and good thermal/chemical stability. So far, zeolite membranes have been preliminarily industrialized for dehydration of organic solvents. This paper reviews the recent development of zeolite membranes for pervaporation dehydration, including mass transfer models, preparation and applications of zeolite membranes. The review also discusses the current industrial applications of zeolite membranes and their future development in pervaporation.
基金supported by the Inovation and Optimalization of Technologies for Natural Gas Dehydration(No.FR-TI1/173)
文摘This paper compares three methods for natural gas dehydration that are widely applied in industry：（1） absorption by triethylene glycol, （2） adsorption on solid desiccants and （3） condensation. A comparison is made according to their energy demand and suitability for use. The energy calculations are performed on a model where 105 Nm3/h water saturated natural gas is processed at 30 °C. The pressure of the gas varies from 7 to 20 MPa. The required outlet concentration of water in natural gas is equivalent to the dew point temperature of -10 °C at gas pressure of 4 MPa.
基金supported by the Petrochemical Research & Technology Company of National Petrochemical Company in Iran
文摘A series of nanocrystalline γ-alumina are synthesized by different procedures, namely, thermal decomposition method （sample A）, precipita-tion method （sample B） and sol-gel method using sucrose and hexadecyltrimethyl ammonium bromide （CTAB） as templates （samples C and D, respectively）. Textural and acidic properties of γ-alumina samples are characterized by XRD, N2 adsorption-desorption and NH3-TPD techniques. Vapor-phase dehydration of methanol into dimethyl ether is carried out over these samples. Among them, sample C shows the highest catalytic activity. NH3-TPD analysis reveals that the sample with smaller crystallite size possesses higher concentration of medium acidic sites and consequently higher catalytic activity. Thermal decomposition method leads to decrease in both surface area and moderate acidity, therefore it is the cause of lower catalytic activity.
基金supported by a National Natural Science Fund project(No.51104022)teacher team construction Top-notch Youth Project(municipal)(No.PXM2016 014222 000043)
文摘Dehydrating large amounts of sludge produced by sewage treatment plants is difficult.Microwave pretreatment can effectively and significantly improve the dewaterability and hydrogen production of sludge subjected to anaerobic digestion. The aim of this study was to investigate the effects of different microwave conditions on hydrogen production from anaerobic digestion and dewaterability of sludge. Based on an analysis of the electric field distribution, a spiral reactor was designed and a continuous microwave system was built to conduct intermittent and continuous experiments under different conditions. Settling Volume, Capillary Suction Time, particle size, and moisture content of the sludge were measured. The results show that sludge pretreatment in continuous experiments has equally remarkable dehydration performance as in intermittent experiments; the minimum moisture content was 77.29% in the intermittent experiment under a microwave power of 300 W and an exposure time of 60 sec, and that in the continuous experiment was 77.56% under a microwave power of 400 W and an exposure time of 60 sec.The peak measured by Differential Scanning Calorimeter appeared earliest under a microwave power of 600 W and an exposure time of 180 sec. The heat flux at the peak was 4.343 W/g, which is relatively small. This indicates that microwave pretreatment induced desirable effects. The maximum yield of hydrogen production was 7.967% under the conditions of microwave power of 500 W, exposure time of 120 sec, and water bath at 55℃. This research provides a theoretical and experimental basis for the development of a continuous microwave sludge-conditioning system.
基金supported by the National Nature Science Foundation of China (No: 20976013)International Science & Technology Cooperation Program of China (No: 2012DFR40240)
文摘Micro-mesoporous composite molecular sieves H-ZSM-5/MCM-41 were prepared by the hydrothermal technique with alkali-treated H-ZSM-5zeolite as the source and characterized by scanning electron microscopy,transmission electron microscopy,energy dispersive spectroscopy,X-ray diffraction,N2 adsorption-desorption measurement and NH3 temperature-programmed desorption.The catalytic performances for the methanol dehydration to dimethyl ether over H-ZSM-5/MCM-41 were evaluated.Among these catalysts,H-ZSM-5/MCM-41 prepared with NaOH dosage (nNa/nSi) varying from 0.4 to 0.47 presented excellent catalytic activity with more than 80%methanol conversion and 100%dimethyl ether selectivity in a wide temperature range of 170—300℃,and H-ZSM-5/MCM-41 prepared with nNa/nSi=0.47 showed constant methanol conversion of about 88.7%,100% dimethyl ether selectivity and excellent lifetime at 220℃.The excellent catalytic performances were due to the highly active and uniform acidic sites and the hierarchical porosity in the micro-mesoporous composite molecular sieves.The catalytic mechanism of H-ZSM-5/MCM-41 for the methanol dehydration to dimethyl ether process was also discussed.
文摘A new type of dehydration unit for natural gas was briefly described and its basic structure and working principles were presented. An indoor test rig for testing the unit performance was set up and the experimental results were given. The results showed that the unit could attain a maximum dew point depression of about 20℃ without any need of external mechanical power and chemicals. The pressure loss ratio, shock wave and the flow rate had great influence on the dehydration characteristics. From the systematic analysis of the factors that affect the dehydration efficiency of the unit, the suggestions for improving the unit are put forward.
基金Supported by the Fundamental Research Funds of Panjin Industrial Technology Institute(PJYJY2016A004)the National Natural Science Foundation of China(No.21776032)+2 种基金Natural Science Foundation of Anhui Province(1808085QB51)the Key Research and Development Plan of Anhui Province(1804a09020072)the Natural Science Research Project of Anhui Colleges and Universities(KJ2017A397)
文摘Zeolite membranes offer outstanding potentials in separation of many molecular mixtures due to their molecular sieving selectivity and the high thermal and mechanical stability that allow them to operate at harsh conditions.Development of durable and high separation performance membranes with lower fabrication and operation cost are highly demanded for industrial applications. Zeolite T membrane possesses good acid-resistance with excellent hydrophilic properties as compared to NaA zeolite membrane and can be extended to industrial organic dehydrations under an acidic environment. In the present review the research advances in development of zeolite T membranes for the dehydration of organic mixtures in acidic conditions are summarized. Especially the low temperature synthesis, and epitaxial growth of the zeolite membrane with high performance are well addressed, besides emphasis is particularly placed on ensemble synthesis of hollow fiber zeolite T membrane module and its future prospects for industrial separations.
文摘In this paper, the effect of acidity of zeolites with FER framework was studied in the methanol dehydration to dimethyl ether reaction, by comparing catalysts with different Si/Al ratios(namely 8, 30 and60). The aim of this work was to investigate how the acid sites concentration, strength, distribution and typology(Br?nsted and Lewis) affect methanol conversion, DME selectivity and coke formation. It was found that the aluminium content affects slightly acid sites strength whilst a relevant effect on acid sites concentration and distribution(Br?nsted/Lewis) was observed as 24% of Lewis sites were found on Alrichest samples, whilst less than 10% of Lewis acid sites were observed on FER at higher Si/Al ratio. All the investigated catalyst samples showed a selectivity toward DME always greater than 0.9 and samples with the lowest Si/Al ratio exhibit the best performances in terms of methanol conversion, approaching the theoretical equilibrium value(around 0.85) at temperatures below 200 °C. Turnover-frequency analysis suggests that this result seems to be related not only to the higher amount of acid sites but also that the presence of Lewis acid sites may play a significant role in converting methanol. On the other hand, the presence of Lewis acid sites, combined with a high acidity, promote the formation of by-products(mainly methane) and coke deposition during the reaction. As final evidence, all the investigated catalysts exhibit very high resistance to deactivation by coke deposition, over 60 h continuous test, and a GC–MS analysis of the coke deposited on the catalyst surface reveals tetra-methyl benzene as main component.
基金supported by the Natural Science Foundation of China (No.21106143)100-talent project of Dalian Institute of Chemical Physics (DICP)the Independent Innovation Foundation of State Key Laboratory of Catalysis (No.R201113)
文摘Phosphoric acid treated niobic acid(NbP)was used for the dehydration of xylose to furfural in biphasic solvent system,which was found to exhibit the best performance among the tested catalysts.The excellent performance of NbP could be explained by the better synergistic cooperation between Bro¨nsted and Lewis acid sites.Moreover,NbP showed good stability and no obvious deactivation or leaching of Nb could be observed after six continuous recycles.
