For the longitudinal seismic response analysis of a tunnel structure under asynchronous earthquake excitations,a longitudinal integral response deformation method classified as a practical approach is proposed in this...For the longitudinal seismic response analysis of a tunnel structure under asynchronous earthquake excitations,a longitudinal integral response deformation method classified as a practical approach is proposed in this paper.The determinations of the structural critical moments when maximal deformations and internal forces in the longitudinal direction occur are deduced as well.When applying the proposed method,the static analysis of the free-field computation model subjected to the least favorable free-field deformation at the tunnel buried depth is performed first to calculate the equivalent input seismic loads.Then,the equivalent input seismic loads are imposed on the integral tunnel-foundation computation model to conduct the static calculation.Afterwards,the critical longitudinal seismic responses of the tunnel are obtained.The applicability of the new method is verified by comparing the seismic responses of a shield tunnel structure in Beijing,determined by the proposed procedure and by a dynamic time-history analysis under a series of obliquely incident out-of-plane and in-plane waves.The results show that the proposed method has a clear concept with high accuracy and simple progress.Meanwhile,this method provides a feasible way to determine the critical moments of the longitudinal seismic responses of a tunnel structure.Therefore,the proposed method can be effectively applied to analyze the seismic response of a long-line underground structure subjected to non-uniform excitations.展开更多
In the longitudinal seismic deformation method for shield tunnels,one of the most commonly used is the longitudinal equivalent stiffness beam model(LES)for simulating the mechanical behavior of the lining.In this mode...In the longitudinal seismic deformation method for shield tunnels,one of the most commonly used is the longitudinal equivalent stiffness beam model(LES)for simulating the mechanical behavior of the lining.In this model,axial deformation and bending deformation are independent,so the equivalent stiffness is a constant value.However,the actual situation is that axial deformation and bending deformation occur simultaneously,which is not considered in LES.At present,we are not clear about the effect on the calculation results when axial deformation and bending deformation occur simultaneously.Therefore,in this paper,we improve the traditional LES by taking the relative deformation as a load and considering the coordinated deformation of axial and bending degrees of freedom.This improved model is called DNLES,and its neutral axis equations are an explicit expression.Then,we propose an iterative algorithm to solve the calculation model of the DNLES-based longitudinal seismic deformation method.Through a calculation example,we find that the internal forces based on LES are notably underestimated than those of DNLES in the compression bending zone,while are overestimated in the tension bending zone.When considering the combined effect,the maximum bending moment reached 13.7 times that of the LES model,and the axial pressure and tension were about 1.14 and 0.96 times,respectively.Further analysis reveals the coordinated deformation process in the axial and bending directions of the shield tunnel,which leads to a consequent change in equivalent stiffness.This explains why,in the longitudinal seismic deformation method,the traditional LES may result in unreasonable calculation results.展开更多
A quasi-quasi-principal axis frame means a unit orthogonal frame in which the shear strains are small. As an extension of Hill's principal axis method we establish the approximate representations for various str...A quasi-quasi-principal axis frame means a unit orthogonal frame in which the shear strains are small. As an extension of Hill's principal axis method we establish the approximate representations for various strains. the.finite rotation tensor, spins, strain rates. conjugate stresses and their rates with respect to quasi-principal axes. The quasiprincipal axis method may function as a new basis of numerically analyzing finite deformation problems.展开更多
Based on the rigid-plastic finite element method（FEM）, the shear stress field of deformation region for high manganese austenite steel during hot asymmetrical rolling process was analyzed. The influences of rolling ...Based on the rigid-plastic finite element method（FEM）, the shear stress field of deformation region for high manganese austenite steel during hot asymmetrical rolling process was analyzed. The influences of rolling parameters, such as the velocity ratio of upper to lower rolls, the initial temperature of workpiece and the reduction rate, on the shear deformation of three nodes in the upper, center and lower layers were discussed. As the rolling parameters change, distinct shear deformation appears in the upper and lower layers, but the shear deformation in the center layer appears only when the velocity ratio is more than 1.00, and the absolute value of the shear stress in this layer is changed with rolling parameters. A mathematical model which reflected the change of the maximal absolute shear stress for the center layer was established, by which the maximal absolute shear stress for the center layer can be easily calculated and the appropriate rolling technology can be designed.展开更多
The comparative study of the tensile plastic deformation of nano(n)-TiO2 ceramic prepared byphysical gas condensation (P) and chemical hydrolysis precipitation (C) methods was conductedby a gas pressure forming techni...The comparative study of the tensile plastic deformation of nano(n)-TiO2 ceramic prepared byphysical gas condensation (P) and chemical hydrolysis precipitation (C) methods was conductedby a gas pressure forming technique at 750~800℃. The results show that n-TiO2 (P) possessesexcellent property of tensile pIastic deformation comparing with n-TiO2(C). The reason for thisis attributed to the surface cleanness and soft agglomeration of n-TiO2 (P) particfe prepared inreIatively cIean vacuum condition.展开更多
In this paper, based on the idea of finite element method, the initial parametric method in bending, problem of a beam is extended to analyse the bar-system structure by employing Dirac function and llcavisidc step fu...In this paper, based on the idea of finite element method, the initial parametric method in bending, problem of a beam is extended to analyse the bar-system structure by employing Dirac function and llcavisidc step function.Then a new method for analysing the internal forces and deformations of bar-system structure in space is suggested by improving the mixed method in statically indeterminate structure.The inferred process and obtained answer will be more succinct and accurate when the problem of internal forces and deformations of bar-system structure is analysed by using the new method provided in this paper.展开更多
Under inspiration from the structure-preserving property of symplectic difference schemes for Hamiltonian systems, two homogenization conditions for a representative unit cell of the periodical composites are proposed...Under inspiration from the structure-preserving property of symplectic difference schemes for Hamiltonian systems, two homogenization conditions for a representative unit cell of the periodical composites are proposed, one condition is the equivalence of strain energy, and the other is the deformation similarity. Based on these two homogenization conditions, an eigenelement method is presented, which is characteristic of structure-preserving property. It follows from the frequency comparisons that the eigenelement method is more accurate than the stiffness average method and the compliance average method.展开更多
Based on the statics theory, a novel and feasible twice-suspended-mass method(TSMM) was proposed to deal with the seldom-studied issue of fault diagnosis for damping springs of large vibrating screen(LVS). With the st...Based on the statics theory, a novel and feasible twice-suspended-mass method(TSMM) was proposed to deal with the seldom-studied issue of fault diagnosis for damping springs of large vibrating screen(LVS). With the static balance characteristic of the screen body/surface as well as the deformation compatibility relation of springs considered, static model of the screen surface under a certain load was established to calculate compression deformation of each spring. Accuracy of the model was validated by both an experiment based on the suspended mass method and the properties of the 3D deformation space in a numerical simulation. Furthermore, by adopting the Taylor formula and the control variate method, quantitative relationship between the change of damping spring deformation and the change of spring stiffness, defined as the deformation sensitive coefficient(DSC), was derived mathematically, from which principle of the TSMM for spring fault diagnosis is clarified. In the end, an experiment was carried out and results show that the TSMM is applicable for diagnosing the fault of single spring in a LVS.展开更多
Abstract A transonic, high Reynolds number natural laminar flow airfoil is designed and studied. The γ-θ transition model is combined with the shear stress transport （SST） k-w turbulence model to predict the trans...Abstract A transonic, high Reynolds number natural laminar flow airfoil is designed and studied. The γ-θ transition model is combined with the shear stress transport （SST） k-w turbulence model to predict the transition region for a laminar-turbulent boundary layer. The non-uniform free-form deformation （NFFD） method based on the non-uniform rational B-spline （NURBS） basis function is introduced to the airfoil parameterization. The non-dominated sorting genetic algorithm-II （NSGA-II） is used as the search algo- rithm, and the surrogate model based on the Kriging models is introduced to improve the efficiency of the optimization system. The optimization system is set up based on the above technologies, and the robust design about the uncertainty of the Mach number is carried out for NASA0412 airfoil. The optimized airfoil is analyzed and compared with the original airfoil. The results show that natural laminar flow can be achieved on a supercritical airfoil to improve the aerodynamic characteristic of airfoils.展开更多
Underground mining activities and rainfall have potential important influence on the initiation and reactivation of the slope deformations,especially on the steep rock slope. In this paper,using the discrete element m...Underground mining activities and rainfall have potential important influence on the initiation and reactivation of the slope deformations,especially on the steep rock slope. In this paper,using the discrete element method(UDEC),numerical simulation was carried out to investigate deformation features and the failure mechanism of the steep rock slope under mining activities and rainfall. A steep rock slope numerical model was created based on a case study at the Wulong area in Chongqing city,China. Mechanical parameters of the rock mass have been determined by situ measurements and laboratory measurements. A preliminary site monitoring system has been realized,aiming at getting structure movements and stresses of unstablerock masses at the most significant discontinuities. According to the numerical model calibrated based on the monitoring data,four types of operation conditions are designed to reveal the effect of mining excavation and extreme rainfall on the deformation of the steep rock slope.展开更多
In order to study the failure process of an anchorage structure and the evolution law of the body＇s defor- mation field, anchor push-out tests were carried out based on digital speckle correlation methods （DSCM）. T...In order to study the failure process of an anchorage structure and the evolution law of the body＇s defor- mation field, anchor push-out tests were carried out based on digital speckle correlation methods （DSCM）. The stress distribution of the anchorage interface was investigated using the particle flow numerical simulation method. The results indicate that there are three stages in the deformation and fail- ure process of an anchorage structure： elastic bonding stage, a de-bonding stage and a failure stage. The stress distribution in the interface controls the stability of the structure. In the elastic bonding stage, the shear stress peak point of the interface is close to the loading end, and the displacement field gradually develops into a ＂V＂ shape, in the de-bonding stage, there is a shear stress plateau in the center of the anchorage section, and shear strain localization begins to form in the deformation field. In the failure stage, the bonding of the interface fails rapidly and the shear stress peak point moves to the anchorage free end. The anchorage structure moves integrally along the macro-cracl~ The de-bonding stage is a research focus in the deformation and failure process of an anchorage structure, and plays an important guiding role in roadway support design and prediction of the stability of the surrounding rock.展开更多
Against the background of analyzing coal wall stability in 14101 fully mechanized longwall top coal caving face in Majialiang coal mine,based on the torque equilibrium of the coal wall,shield support and the roof stra...Against the background of analyzing coal wall stability in 14101 fully mechanized longwall top coal caving face in Majialiang coal mine,based on the torque equilibrium of the coal wall,shield support and the roof strata,an elastic mechanics model was established to calculate the stress applied on the coal wall.The displacement method was used to obtain the stress and deformation distributions of the coal wall.This study also researched the influence of support resistance,protective pressure to the coal wall,fracture position of the main roof and mining height on the coal wall deformation.The following conclusions are drawn:(1) The shorter the distance from the longwall face,the greater the vertical compressive stress and horizontal tensile stress borne by the coal wall.The coal wall is prone to failure in the form of compressive-shear and tension;(2) With increasing support resistance,the revolution angle of the main roof decreases linearly.As the support resistance and protective force supplied by the face guard increases,the maximum deformation of the coal wall decreases linearly;(3) As the face approaches the fracture position of the main roof,coal wall horizontal deformation increases significantly,and the coal wall is prone to instability;and(4) The best mining height of 14101 longwall face is 3.0 m.展开更多
The bulk metal forming processes were simulated by using a one-step finite element(FE)approach based on deformation theory of plasticity,which enables rapid prediction of final workpiece configurations and stress/stra...The bulk metal forming processes were simulated by using a one-step finite element(FE)approach based on deformation theory of plasticity,which enables rapid prediction of final workpiece configurations and stress/strain distributions.This approach was implemented to minimize the approximated plastic potential energy derived from the total plastic work and the equivalent external work in static equilibrium,for incompressibly rigid-plastic materials,by FE calculation based on the extremum work principle.The one-step forward simulations of compression and rolling processes were presented as examples,and the results were compared with those obtained by classical incremental FE simulation to verify the feasibility and validity of the proposed method.展开更多
Based on finite element method, the extrusion deformation process of ground surface during the Lushan earthquake （April 20, 2013） is investigated in this work. In order to construct the finite element model of Lusha...Based on finite element method, the extrusion deformation process of ground surface during the Lushan earthquake （April 20, 2013） is investigated in this work. In order to construct the finite element model of Lushan earthquake structure, the geophysical layer model of Lushan area, the frictional characteristic of slip-weaken along the fault surface, and the Coulomb failure criterion are considered. Through the computation and the comparison with achievement on the Lushan focal dynamics, our researches indicate that： （1） The most extrusion deformation of ground surface occurred in the initial phase of earthquake procession, i.e., between the fourth and sixth seconds after the earthquake occurred. （2） Between the first and sixth seconds after the earthquake, the extrusion deformation concentrates on the surface projection of earthquake fault. （3） Between the first and third seconds after the earthquake, the extrusion deformation of ground surface is very tiny. Meanwhile, the extrusion deformation reaches maximum at the sixth second after earthquake. （4） After 6 s of Lushan earthquake, the extrusion deformation spread out of earthquake structure projection. （5） During the earthquake, the maximum of extrusion deformation on ground surface is larger than the final deformation of the post-earthquake, in other words, the ground extrusion deformation will lastly reach a relatively small value after the Lushan earthquake occurred.展开更多
The structure of a microlens array（ MLA） can be formed on copper by an indentation process which is a new manufacture approach we applied here instead of a traditional method to test the material property,thereby wo...The structure of a microlens array（ MLA） can be formed on copper by an indentation process which is a new manufacture approach we applied here instead of a traditional method to test the material property,thereby work time can be saved. Single-indentation and multi-indentation are both conducted to generate a single dimple and dimples array,namely micro lens and MLA. Based on finite element simulation method,factors affecting the form accuracy,such as springback at the compressed area of one single dimple and compressional deformation at the adjacent area of dimples arrays,are determined,and the results are verified by experiments under the same conditions. Meanwhile,indenter compensation method is proposed to improve form accuracy of single dimple,and the relationship between pitch and compressional deformation is investigated by modelling seven sets of multi-indentations at different pitches to identify the critical pitch for the MLA＇s indentation processing. Loads and cross-sectional profiles are measured and analyzed to reveal the compressional deformation mechanism. Finally,it is found that MLA at pitches higher than 1. 47 times of its diameter can be manufactured precisely by indentation using a compensated indenter.展开更多
In this paper, a finite element method （FEM）-based multi-phase problem based on a newly proposed thermal elastoplastic constitutive model for saturated/unsaturated geomaterial is discussed. A program of FEM named as...In this paper, a finite element method （FEM）-based multi-phase problem based on a newly proposed thermal elastoplastic constitutive model for saturated/unsaturated geomaterial is discussed. A program of FEM named as SOFT, adopting unified field equations for thermo-hydro-mechanical-air （THMA） behavior of geomaterial and using finite element-finite difference （FE-FD） scheme for so/l-water-air three-phase coupling problem, is used in the numerical simulation. As an application of the newly proposed numerical method, two engineering problems, one for slope failure in unsaturated model ground and another for in situ heating test related to deep geological repository of high-level radioactive waste （HLRW）, are simulated. The model tests on slope failure in unsaturated Shirasu ground, carried out by Kitamura et al. （2007）, is simulated in the framework of soil-water-air three-phase coupling under the condition of constant temperature. While the in situ heating test reported by Munoz （2006） is simulated in the same framework under the conditions of variable temperature hut constant air pressure.展开更多
Many studies revealed that the Earth medium＇s lateral heterogeneity can cause considerable effects on the co- and post-seismic deformation field. In this study, the threedimensional finite element numerical method ar...Many studies revealed that the Earth medium＇s lateral heterogeneity can cause considerable effects on the co- and post-seismic deformation field. In this study, the threedimensional finite element numerical method are adopted to quantify the effects of lateral heterogeneity caused by material parameters and fault dip angle on the co- and postseismic deformation in the near- and far-field. Our results show that： 1） the medium＇s lateral heterogeneity does affect the co-seismic deformation, with the effects increasing with the medium＇s lateral heterogeneity caused by material parameters; 2） the Lame parameters play a more dominant role than density in the effects caused by lateral heterogeneity; 3） when a fault＇s dip angle is smaller than 90, the effects of the medium＇s lateral heterogeneity on the hanging wall are greater than on the footwall; 4） the impact of lateral heterogeneity caused by the viscosity coefficient on the post-seismic deformation can affect a large area, including the near- and far-field.展开更多
In daily life,human need various senses to obtain information about their surroundings,and touch is one of the five major human sensing signals.Similarly,it is extremely important for robots to be endowed with tactile...In daily life,human need various senses to obtain information about their surroundings,and touch is one of the five major human sensing signals.Similarly,it is extremely important for robots to be endowed with tactile sensing ability.In recent years,vision-based tactile sensing technology has been the research hotspot and frontier in the field of tactile perception.Compared to conventional tactile sensing technologies,vision-based tactile sensing technologies are capable of obtaining highquality and high-resolution tactile information at a lower cost,while not being limited by the size and shape of sensors.Several previous articles have reviewed the sensing mechanism and electrical components of vision-based sensors,greatly promoting the innovation of tactile sensing.Different from existing reviews,this article concentrates on the underlying tracking method which converts real-time images into deformation information,including contact,sliding and friction.We will show the history and development of both model-based and model-free tracking methods,among which model-based approaches rely on schematic mechanical theories,and model-free approaches mainly involve machine learning algorithms.Comparing the efficiency and accuracy of existing deformation tracking methods,future research directions of vision-based tactile sensors for smart manipulations and robots are also discussed.展开更多
By the modified iteration method,in this paper,non=symmetrical large deflectionof a shallow spherical shell is discussed. We solve the second-order approximate analytical solution of the deflection of a shallow spheri...By the modified iteration method,in this paper,non=symmetrical large deflectionof a shallow spherical shell is discussed. We solve the second-order approximate analytical solution of the deflection of a shallow spherical shell subjected to linearliquid loads. and portray the characteristic curves of load-deflection on a perturbing point. With this paper's method, the similar questions of other kind of shell can bediscussed. Through the examples.we discuss the large defection of a plane and shallow spherical shells with different initial deflections.展开更多
It is important to study the subgrade characteristics of high-speed railways in consideration of the water–soil coupling dynamic problem,especially when high-speed trains operate in rainy regions.This study develops ...It is important to study the subgrade characteristics of high-speed railways in consideration of the water–soil coupling dynamic problem,especially when high-speed trains operate in rainy regions.This study develops a nonlinear water–soil interaction dynamic model of slab track coupling with subgrade under high-speed train loading based on vehicle–track coupling dynamics.By using this model,the basic dynamic characteristics,including water–soil interaction and without water induced by the high-speed train loading,are studied.The main factors-the permeability coefficien and the porosity-influencin the subgrade deformation are investigated.The developed model can characterize the soil dynamic behaviour more realistically,especially when considering the influenc of water-rich soil.展开更多
基金National Natural Science Foundation of China under Grant No.51478247。
文摘For the longitudinal seismic response analysis of a tunnel structure under asynchronous earthquake excitations,a longitudinal integral response deformation method classified as a practical approach is proposed in this paper.The determinations of the structural critical moments when maximal deformations and internal forces in the longitudinal direction occur are deduced as well.When applying the proposed method,the static analysis of the free-field computation model subjected to the least favorable free-field deformation at the tunnel buried depth is performed first to calculate the equivalent input seismic loads.Then,the equivalent input seismic loads are imposed on the integral tunnel-foundation computation model to conduct the static calculation.Afterwards,the critical longitudinal seismic responses of the tunnel are obtained.The applicability of the new method is verified by comparing the seismic responses of a shield tunnel structure in Beijing,determined by the proposed procedure and by a dynamic time-history analysis under a series of obliquely incident out-of-plane and in-plane waves.The results show that the proposed method has a clear concept with high accuracy and simple progress.Meanwhile,this method provides a feasible way to determine the critical moments of the longitudinal seismic responses of a tunnel structure.Therefore,the proposed method can be effectively applied to analyze the seismic response of a long-line underground structure subjected to non-uniform excitations.
基金the National Natural Science Foundation of China(Grant Nos.52130808 and 51878566)National Key R&D Program of China(Key Projects for International Science and Technology Innovation Cooperation between Governments,Grant No.2022YFE0104300).
文摘In the longitudinal seismic deformation method for shield tunnels,one of the most commonly used is the longitudinal equivalent stiffness beam model(LES)for simulating the mechanical behavior of the lining.In this model,axial deformation and bending deformation are independent,so the equivalent stiffness is a constant value.However,the actual situation is that axial deformation and bending deformation occur simultaneously,which is not considered in LES.At present,we are not clear about the effect on the calculation results when axial deformation and bending deformation occur simultaneously.Therefore,in this paper,we improve the traditional LES by taking the relative deformation as a load and considering the coordinated deformation of axial and bending degrees of freedom.This improved model is called DNLES,and its neutral axis equations are an explicit expression.Then,we propose an iterative algorithm to solve the calculation model of the DNLES-based longitudinal seismic deformation method.Through a calculation example,we find that the internal forces based on LES are notably underestimated than those of DNLES in the compression bending zone,while are overestimated in the tension bending zone.When considering the combined effect,the maximum bending moment reached 13.7 times that of the LES model,and the axial pressure and tension were about 1.14 and 0.96 times,respectively.Further analysis reveals the coordinated deformation process in the axial and bending directions of the shield tunnel,which leads to a consequent change in equivalent stiffness.This explains why,in the longitudinal seismic deformation method,the traditional LES may result in unreasonable calculation results.
文摘A quasi-quasi-principal axis frame means a unit orthogonal frame in which the shear strains are small. As an extension of Hill's principal axis method we establish the approximate representations for various strains. the.finite rotation tensor, spins, strain rates. conjugate stresses and their rates with respect to quasi-principal axes. The quasiprincipal axis method may function as a new basis of numerically analyzing finite deformation problems.
基金Item Sponsored by National Natural Science Foundation of China(51274062)
文摘Based on the rigid-plastic finite element method（FEM）, the shear stress field of deformation region for high manganese austenite steel during hot asymmetrical rolling process was analyzed. The influences of rolling parameters, such as the velocity ratio of upper to lower rolls, the initial temperature of workpiece and the reduction rate, on the shear deformation of three nodes in the upper, center and lower layers were discussed. As the rolling parameters change, distinct shear deformation appears in the upper and lower layers, but the shear deformation in the center layer appears only when the velocity ratio is more than 1.00, and the absolute value of the shear stress in this layer is changed with rolling parameters. A mathematical model which reflected the change of the maximal absolute shear stress for the center layer was established, by which the maximal absolute shear stress for the center layer can be easily calculated and the appropriate rolling technology can be designed.
文摘The comparative study of the tensile plastic deformation of nano(n)-TiO2 ceramic prepared byphysical gas condensation (P) and chemical hydrolysis precipitation (C) methods was conductedby a gas pressure forming technique at 750~800℃. The results show that n-TiO2 (P) possessesexcellent property of tensile pIastic deformation comparing with n-TiO2(C). The reason for thisis attributed to the surface cleanness and soft agglomeration of n-TiO2 (P) particfe prepared inreIatively cIean vacuum condition.
文摘In this paper, based on the idea of finite element method, the initial parametric method in bending, problem of a beam is extended to analyse the bar-system structure by employing Dirac function and llcavisidc step function.Then a new method for analysing the internal forces and deformations of bar-system structure in space is suggested by improving the mixed method in statically indeterminate structure.The inferred process and obtained answer will be more succinct and accurate when the problem of internal forces and deformations of bar-system structure is analysed by using the new method provided in this paper.
文摘Under inspiration from the structure-preserving property of symplectic difference schemes for Hamiltonian systems, two homogenization conditions for a representative unit cell of the periodical composites are proposed, one condition is the equivalence of strain energy, and the other is the deformation similarity. Based on these two homogenization conditions, an eigenelement method is presented, which is characteristic of structure-preserving property. It follows from the frequency comparisons that the eigenelement method is more accurate than the stiffness average method and the compliance average method.
基金Project(20120095110001)supported by the PhD Programs Foundation of Ministry of Education of ChinaProject(51134022,51221462)supported by the National Natural Science Foundation of China+1 种基金Project(CXZZ13_0927)supported by Research and Innovation Program for College Graduates of Jiangsu Province,ChinaProject(2013DXS03)supported by the Fundamental Research Funds for Central Universities of China
文摘Based on the statics theory, a novel and feasible twice-suspended-mass method(TSMM) was proposed to deal with the seldom-studied issue of fault diagnosis for damping springs of large vibrating screen(LVS). With the static balance characteristic of the screen body/surface as well as the deformation compatibility relation of springs considered, static model of the screen surface under a certain load was established to calculate compression deformation of each spring. Accuracy of the model was validated by both an experiment based on the suspended mass method and the properties of the 3D deformation space in a numerical simulation. Furthermore, by adopting the Taylor formula and the control variate method, quantitative relationship between the change of damping spring deformation and the change of spring stiffness, defined as the deformation sensitive coefficient(DSC), was derived mathematically, from which principle of the TSMM for spring fault diagnosis is clarified. In the end, an experiment was carried out and results show that the TSMM is applicable for diagnosing the fault of single spring in a LVS.
文摘Abstract A transonic, high Reynolds number natural laminar flow airfoil is designed and studied. The γ-θ transition model is combined with the shear stress transport （SST） k-w turbulence model to predict the transition region for a laminar-turbulent boundary layer. The non-uniform free-form deformation （NFFD） method based on the non-uniform rational B-spline （NURBS） basis function is introduced to the airfoil parameterization. The non-dominated sorting genetic algorithm-II （NSGA-II） is used as the search algo- rithm, and the surrogate model based on the Kriging models is introduced to improve the efficiency of the optimization system. The optimization system is set up based on the above technologies, and the robust design about the uncertainty of the Mach number is carried out for NASA0412 airfoil. The optimized airfoil is analyzed and compared with the original airfoil. The results show that natural laminar flow can be achieved on a supercritical airfoil to improve the aerodynamic characteristic of airfoils.
基金financially supported by a grant from China Natural Science foundation (51379112,51422904)the National Program on Key Basic Research Project of China (973 Program)(2013CB036002)the National Natural Science Foundation of China (51309144)
文摘Underground mining activities and rainfall have potential important influence on the initiation and reactivation of the slope deformations,especially on the steep rock slope. In this paper,using the discrete element method(UDEC),numerical simulation was carried out to investigate deformation features and the failure mechanism of the steep rock slope under mining activities and rainfall. A steep rock slope numerical model was created based on a case study at the Wulong area in Chongqing city,China. Mechanical parameters of the rock mass have been determined by situ measurements and laboratory measurements. A preliminary site monitoring system has been realized,aiming at getting structure movements and stresses of unstablerock masses at the most significant discontinuities. According to the numerical model calibrated based on the monitoring data,four types of operation conditions are designed to reveal the effect of mining excavation and extreme rainfall on the deformation of the steep rock slope.
基金financially supported by the National Key Basic Research Program of China (No.2010CB226805)the National Natural Science Foundation of China (Nos.51474136 and 51474013)+1 种基金the Opening Project Fund of State Key Laboratory of Mining Disaster Prevention and Control Co-founded by Shandong Province and the Ministry of Science and Technology (No.MDPC2013KF06)the Research Award Fund for the Excellent Youth of Shandong University of Science and Technology (No.2011KYJQ106)
文摘In order to study the failure process of an anchorage structure and the evolution law of the body＇s defor- mation field, anchor push-out tests were carried out based on digital speckle correlation methods （DSCM）. The stress distribution of the anchorage interface was investigated using the particle flow numerical simulation method. The results indicate that there are three stages in the deformation and fail- ure process of an anchorage structure： elastic bonding stage, a de-bonding stage and a failure stage. The stress distribution in the interface controls the stability of the structure. In the elastic bonding stage, the shear stress peak point of the interface is close to the loading end, and the displacement field gradually develops into a ＂V＂ shape, in the de-bonding stage, there is a shear stress plateau in the center of the anchorage section, and shear strain localization begins to form in the deformation field. In the failure stage, the bonding of the interface fails rapidly and the shear stress peak point moves to the anchorage free end. The anchorage structure moves integrally along the macro-cracl~ The de-bonding stage is a research focus in the deformation and failure process of an anchorage structure, and plays an important guiding role in roadway support design and prediction of the stability of the surrounding rock.
基金provided by the Priority Academic Program Development of Jiangsu Higher Education Institutions,the Graduate Students of Jiangsu Province Innovation Program (No.CXZZ13_0948)the National Natural Science Foundation of China (No.51304202)the Natural Science Foundation of Jiangsu Province (No.BK20130190)
文摘Against the background of analyzing coal wall stability in 14101 fully mechanized longwall top coal caving face in Majialiang coal mine,based on the torque equilibrium of the coal wall,shield support and the roof strata,an elastic mechanics model was established to calculate the stress applied on the coal wall.The displacement method was used to obtain the stress and deformation distributions of the coal wall.This study also researched the influence of support resistance,protective pressure to the coal wall,fracture position of the main roof and mining height on the coal wall deformation.The following conclusions are drawn:(1) The shorter the distance from the longwall face,the greater the vertical compressive stress and horizontal tensile stress borne by the coal wall.The coal wall is prone to failure in the form of compressive-shear and tension;(2) With increasing support resistance,the revolution angle of the main roof decreases linearly.As the support resistance and protective force supplied by the face guard increases,the maximum deformation of the coal wall decreases linearly;(3) As the face approaches the fracture position of the main roof,coal wall horizontal deformation increases significantly,and the coal wall is prone to instability;and(4) The best mining height of 14101 longwall face is 3.0 m.
基金Project(50575143)supported by the National Natural Science Foundation of ChinaProject(20040248005)supported by the Specialized Research Fund for the Doctoral Program of Higher Education of China
文摘The bulk metal forming processes were simulated by using a one-step finite element(FE)approach based on deformation theory of plasticity,which enables rapid prediction of final workpiece configurations and stress/strain distributions.This approach was implemented to minimize the approximated plastic potential energy derived from the total plastic work and the equivalent external work in static equilibrium,for incompressibly rigid-plastic materials,by FE calculation based on the extremum work principle.The one-step forward simulations of compression and rolling processes were presented as examples,and the results were compared with those obtained by classical incremental FE simulation to verify the feasibility and validity of the proposed method.
基金supported by the Basic Research Project of Institute of Geology,China Earthquake Administration(IGCEA1503)
文摘Based on finite element method, the extrusion deformation process of ground surface during the Lushan earthquake （April 20, 2013） is investigated in this work. In order to construct the finite element model of Lushan earthquake structure, the geophysical layer model of Lushan area, the frictional characteristic of slip-weaken along the fault surface, and the Coulomb failure criterion are considered. Through the computation and the comparison with achievement on the Lushan focal dynamics, our researches indicate that： （1） The most extrusion deformation of ground surface occurred in the initial phase of earthquake procession, i.e., between the fourth and sixth seconds after the earthquake occurred. （2） Between the first and sixth seconds after the earthquake, the extrusion deformation concentrates on the surface projection of earthquake fault. （3） Between the first and third seconds after the earthquake, the extrusion deformation of ground surface is very tiny. Meanwhile, the extrusion deformation reaches maximum at the sixth second after earthquake. （4） After 6 s of Lushan earthquake, the extrusion deformation spread out of earthquake structure projection. （5） During the earthquake, the maximum of extrusion deformation on ground surface is larger than the final deformation of the post-earthquake, in other words, the ground extrusion deformation will lastly reach a relatively small value after the Lushan earthquake occurred.
基金Supported by the National Natural Science Foundation of China(51375050)
文摘The structure of a microlens array（ MLA） can be formed on copper by an indentation process which is a new manufacture approach we applied here instead of a traditional method to test the material property,thereby work time can be saved. Single-indentation and multi-indentation are both conducted to generate a single dimple and dimples array,namely micro lens and MLA. Based on finite element simulation method,factors affecting the form accuracy,such as springback at the compressed area of one single dimple and compressional deformation at the adjacent area of dimples arrays,are determined,and the results are verified by experiments under the same conditions. Meanwhile,indenter compensation method is proposed to improve form accuracy of single dimple,and the relationship between pitch and compressional deformation is investigated by modelling seven sets of multi-indentations at different pitches to identify the critical pitch for the MLA＇s indentation processing. Loads and cross-sectional profiles are measured and analyzed to reveal the compressional deformation mechanism. Finally,it is found that MLA at pitches higher than 1. 47 times of its diameter can be manufactured precisely by indentation using a compensated indenter.
文摘In this paper, a finite element method （FEM）-based multi-phase problem based on a newly proposed thermal elastoplastic constitutive model for saturated/unsaturated geomaterial is discussed. A program of FEM named as SOFT, adopting unified field equations for thermo-hydro-mechanical-air （THMA） behavior of geomaterial and using finite element-finite difference （FE-FD） scheme for so/l-water-air three-phase coupling problem, is used in the numerical simulation. As an application of the newly proposed numerical method, two engineering problems, one for slope failure in unsaturated model ground and another for in situ heating test related to deep geological repository of high-level radioactive waste （HLRW）, are simulated. The model tests on slope failure in unsaturated Shirasu ground, carried out by Kitamura et al. （2007）, is simulated in the framework of soil-water-air three-phase coupling under the condition of constant temperature. While the in situ heating test reported by Munoz （2006） is simulated in the same framework under the conditions of variable temperature hut constant air pressure.
基金co-supported by the National Natural Science Foundation of China (41431069)the State Key Development Program for Basic Research of China (2013CB733304, 2013CB733303)+1 种基金the Doctoral Fund of Ministry of Education of China (20110141130010)China Postdoctoral Science Foundation funded project (2013M542062)
文摘Many studies revealed that the Earth medium＇s lateral heterogeneity can cause considerable effects on the co- and post-seismic deformation field. In this study, the threedimensional finite element numerical method are adopted to quantify the effects of lateral heterogeneity caused by material parameters and fault dip angle on the co- and postseismic deformation in the near- and far-field. Our results show that： 1） the medium＇s lateral heterogeneity does affect the co-seismic deformation, with the effects increasing with the medium＇s lateral heterogeneity caused by material parameters; 2） the Lame parameters play a more dominant role than density in the effects caused by lateral heterogeneity; 3） when a fault＇s dip angle is smaller than 90, the effects of the medium＇s lateral heterogeneity on the hanging wall are greater than on the footwall; 4） the impact of lateral heterogeneity caused by the viscosity coefficient on the post-seismic deformation can affect a large area, including the near- and far-field.
基金supported by the National Key Research and Development of China(Grant No.2022YFB3805700)the National Natural Science Foundation of China(Grant Nos.12122202 and 12372162)the Fundamental Research Funds for the Central Universities(Grant No.2024CX06021).
文摘In daily life,human need various senses to obtain information about their surroundings,and touch is one of the five major human sensing signals.Similarly,it is extremely important for robots to be endowed with tactile sensing ability.In recent years,vision-based tactile sensing technology has been the research hotspot and frontier in the field of tactile perception.Compared to conventional tactile sensing technologies,vision-based tactile sensing technologies are capable of obtaining highquality and high-resolution tactile information at a lower cost,while not being limited by the size and shape of sensors.Several previous articles have reviewed the sensing mechanism and electrical components of vision-based sensors,greatly promoting the innovation of tactile sensing.Different from existing reviews,this article concentrates on the underlying tracking method which converts real-time images into deformation information,including contact,sliding and friction.We will show the history and development of both model-based and model-free tracking methods,among which model-based approaches rely on schematic mechanical theories,and model-free approaches mainly involve machine learning algorithms.Comparing the efficiency and accuracy of existing deformation tracking methods,future research directions of vision-based tactile sensors for smart manipulations and robots are also discussed.
文摘By the modified iteration method,in this paper,non=symmetrical large deflectionof a shallow spherical shell is discussed. We solve the second-order approximate analytical solution of the deflection of a shallow spherical shell subjected to linearliquid loads. and portray the characteristic curves of load-deflection on a perturbing point. With this paper's method, the similar questions of other kind of shell can bediscussed. Through the examples.we discuss the large defection of a plane and shallow spherical shells with different initial deflections.
基金supported by the National Natural Science Foundation of China (Grants U1134202,51305360)the National Basic Research Programof China(Grant2011CB711103)the 2015 Doctoral Innovation Funds of Southwest Jiaotong University
文摘It is important to study the subgrade characteristics of high-speed railways in consideration of the water–soil coupling dynamic problem,especially when high-speed trains operate in rainy regions.This study develops a nonlinear water–soil interaction dynamic model of slab track coupling with subgrade under high-speed train loading based on vehicle–track coupling dynamics.By using this model,the basic dynamic characteristics,including water–soil interaction and without water induced by the high-speed train loading,are studied.The main factors-the permeability coefficien and the porosity-influencin the subgrade deformation are investigated.The developed model can characterize the soil dynamic behaviour more realistically,especially when considering the influenc of water-rich soil.
