A set of generalized solutions are proposed for estimating ultimate load capacity of pipeline with arbitrary corrosion shapes subjected to combined internal pressure, axial force and bending moment. Isotropic and anis...A set of generalized solutions are proposed for estimating ultimate load capacity of pipeline with arbitrary corrosion shapes subjected to combined internal pressure, axial force and bending moment. Isotropic and anisotropic material characteristics in longitudinal and circumferential direction of pipeline are also considered in the proposed equations. Simplified numerical method is used to solve the generalized expressions. The comparisons of numerical results based generalized solutions and full-scale experimental results are carried out. The predicted results agree reasonably well with the experiment results. Meanwhile, the effects of corrosion shapes and locations on the ultimate load capacity are studied.展开更多
Based on the nonequilibrium Green＇s function （NEGF） in combination with density functional theory （DFT） calcu- lations, we study the electronic structures and transport properties of zigzag MoS2 nanoribbons （ZM...Based on the nonequilibrium Green＇s function （NEGF） in combination with density functional theory （DFT） calcu- lations, we study the electronic structures and transport properties of zigzag MoS2 nanoribbons （ZMNRs） with V-shaped vacancy defects on the edge. The vacancy formation energy results show that the zigzag vacancy is easier to create on the edge of ZMNR than the armchair vacancy. Both of the defects can make the electronic band structures of ZMNRs change from metal to semiconductor. The calculations of electronic transport properties depict that the currents drop off clearly and rectification ratios increase in the defected systems. These effects would open up possibilities for their applications in novel nanoelectronic devices.展开更多
It is highly imperative to understand the mechanism underlying the formation of cloud-shaped defects in stainless steel to reduce the defect incidences. This study investigated the defect microstructure by SEM, simula...It is highly imperative to understand the mechanism underlying the formation of cloud-shaped defects in stainless steel to reduce the defect incidences. This study investigated the defect microstructure by SEM, simulated pickling in the laboratory, and performed structure analysis of oxide scales after hot rolling. Results show that the cloud-shaped defects in 304 No. 1 surface （after hot-rolled annealing and pickling） cause the pickling chromatic aberration between the honeycomb-shaped grains of the Cr-depleted layer and the smooth grains of the stainless steel matrix, which is formed in the case of insufficient pickling. The chromatic aberration is related to the uneven oxide scales formed before pickling. With the improvement of pickling capacity, it is possible to completely pickle the Cr-depleted layer and eliminate the cloud-shaped defects.展开更多
The cross section of photonic crystal fiber (PCF) is a two dimensional photonic crystal. The rods formed in PCF are not exact cylinders, the shape of rods will affect the eigenmode formed in two dimensional photonic c...The cross section of photonic crystal fiber (PCF) is a two dimensional photonic crystal. The rods formed in PCF are not exact cylinders, the shape of rods will affect the eigenmode formed in two dimensional photonic crystals around a defect. Based on the relations between the defect eigenmodes and the radius of dielectric cylinders, the defect eigenmodes in photonic crystals in which the ellipse rods take the place of cylinders are studied by numerical calculation. The analysis of the relation between the eigenfrequency and the minor axis radius of ellipse rods show that the defect eigenfrequency is controlled by the cross section area of rods and the distribution of electromagnetic field around the defect is also affected by the cross section shape of rods. It provides a better way to modify the distribution of electromagnetic fields in photonic crystal and keeps the eigenfrequency unchanged.展开更多
Martensitic stabilization caused by deformation in a TiNi shape memory alloy was studied.Special attention was paid to the deformed microstructures to identify the cause of martensitic stabilization.Martensitic stabil...Martensitic stabilization caused by deformation in a TiNi shape memory alloy was studied.Special attention was paid to the deformed microstructures to identify the cause of martensitic stabilization.Martensitic stabilization was demonstrated by differential scanning calorimetry for the tensioned TiNi shape memory alloy.Transmission electron microscopy revealed that antiphase boundaries were formed because of the fourfold dissociation of [110]B19＇ super lattice dislocations and were preserved after reverse transformation due to the lattice correspondence.Martensitic stabilization was attributed to dislocations induced by deformation,which reduced the ordering degree of the microstructure,spoiled the reverse path from martensite to parent phase compared with thermoelastic transformation,and imposed resistance on phase transformation through the stress field.展开更多
The paper presents an improved equivalent circuit parameters extraction method for the dumbbell-shaped defected ground structure (DGS). The new extraction parameters equations are obtained in closed-form expressions, ...The paper presents an improved equivalent circuit parameters extraction method for the dumbbell-shaped defected ground structure (DGS). The new extraction parameters equations are obtained in closed-form expressions, which contain S11 and S21. The DGS unit with center frequency of 5 GHz is designed and fabricated on a TLX substrate with thickness of 1 mm and dielectric constant of 2.55. The circuit simulated results are in good agreement with the measured results. This parameters extraction method can be widely used for the design and analysis of DGS .展开更多
基金financially supported by the National Natural Science Foundation of China(Grant No.51309236)Doctoral Foundation of the Ministry of Education of China(Grant No.20120007120009)+2 种基金the Opening Fund of State Key Laboratory of Ocean Engineering(Shanghai Jiao Tong University,Grant No.1314)the Opening Fund of State Key Laboratory of Hydraulic Engineering Simulation and Safety(Tianjin University,Grant No.HESS-1411)the Science Foundation of China University of Petroleum(Beijing)(Grant No.QD-2010-08)
文摘A set of generalized solutions are proposed for estimating ultimate load capacity of pipeline with arbitrary corrosion shapes subjected to combined internal pressure, axial force and bending moment. Isotropic and anisotropic material characteristics in longitudinal and circumferential direction of pipeline are also considered in the proposed equations. Simplified numerical method is used to solve the generalized expressions. The comparisons of numerical results based generalized solutions and full-scale experimental results are carried out. The predicted results agree reasonably well with the experiment results. Meanwhile, the effects of corrosion shapes and locations on the ultimate load capacity are studied.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.21103232,51272291,and 11174371)
文摘Based on the nonequilibrium Green＇s function （NEGF） in combination with density functional theory （DFT） calcu- lations, we study the electronic structures and transport properties of zigzag MoS2 nanoribbons （ZMNRs） with V-shaped vacancy defects on the edge. The vacancy formation energy results show that the zigzag vacancy is easier to create on the edge of ZMNR than the armchair vacancy. Both of the defects can make the electronic band structures of ZMNRs change from metal to semiconductor. The calculations of electronic transport properties depict that the currents drop off clearly and rectification ratios increase in the defected systems. These effects would open up possibilities for their applications in novel nanoelectronic devices.
文摘It is highly imperative to understand the mechanism underlying the formation of cloud-shaped defects in stainless steel to reduce the defect incidences. This study investigated the defect microstructure by SEM, simulated pickling in the laboratory, and performed structure analysis of oxide scales after hot rolling. Results show that the cloud-shaped defects in 304 No. 1 surface （after hot-rolled annealing and pickling） cause the pickling chromatic aberration between the honeycomb-shaped grains of the Cr-depleted layer and the smooth grains of the stainless steel matrix, which is formed in the case of insufficient pickling. The chromatic aberration is related to the uneven oxide scales formed before pickling. With the improvement of pickling capacity, it is possible to completely pickle the Cr-depleted layer and eliminate the cloud-shaped defects.
文摘The cross section of photonic crystal fiber (PCF) is a two dimensional photonic crystal. The rods formed in PCF are not exact cylinders, the shape of rods will affect the eigenmode formed in two dimensional photonic crystals around a defect. Based on the relations between the defect eigenmodes and the radius of dielectric cylinders, the defect eigenmodes in photonic crystals in which the ellipse rods take the place of cylinders are studied by numerical calculation. The analysis of the relation between the eigenfrequency and the minor axis radius of ellipse rods show that the defect eigenfrequency is controlled by the cross section area of rods and the distribution of electromagnetic field around the defect is also affected by the cross section shape of rods. It provides a better way to modify the distribution of electromagnetic fields in photonic crystal and keeps the eigenfrequency unchanged.
文摘Martensitic stabilization caused by deformation in a TiNi shape memory alloy was studied.Special attention was paid to the deformed microstructures to identify the cause of martensitic stabilization.Martensitic stabilization was demonstrated by differential scanning calorimetry for the tensioned TiNi shape memory alloy.Transmission electron microscopy revealed that antiphase boundaries were formed because of the fourfold dissociation of [110]B19＇ super lattice dislocations and were preserved after reverse transformation due to the lattice correspondence.Martensitic stabilization was attributed to dislocations induced by deformation,which reduced the ordering degree of the microstructure,spoiled the reverse path from martensite to parent phase compared with thermoelastic transformation,and imposed resistance on phase transformation through the stress field.
文摘The paper presents an improved equivalent circuit parameters extraction method for the dumbbell-shaped defected ground structure (DGS). The new extraction parameters equations are obtained in closed-form expressions, which contain S11 and S21. The DGS unit with center frequency of 5 GHz is designed and fabricated on a TLX substrate with thickness of 1 mm and dielectric constant of 2.55. The circuit simulated results are in good agreement with the measured results. This parameters extraction method can be widely used for the design and analysis of DGS .
