As one of the most promising new energy sources,hydrogen energy is expected to usher in a full-fledged“hydrogen economy”in the 21st century.Compared with traditional high-pressure gaseous and cryogenic liquid hydrog...As one of the most promising new energy sources,hydrogen energy is expected to usher in a full-fledged“hydrogen economy”in the 21st century.Compared with traditional high-pressure gaseous and cryogenic liquid hydrogen storage methods,solid-state chemical hydrogen storage shows significant advantages in safety,high efficiency,and cost-effectiveness.Magnesium-based lightweight hydrogen storage materials have attracted widespread attention due to their high gravimetric hydrogen storage density(7.6%)and favorable reversibility.However,their sluggish reaction kinetics and stringent operating conditions(with H2 release temperatures exceeding 350°C and H2 absorption pressures above 4 MPa)pose major challenges for practical applications.Domestic and international researchers have conducted in-depth studies to address these issues,achieving substantial progress in the modification of magnesium-based hydrogen storage alloys.This paper systematically elaborates on major modification techniques such as alloying,nanostructuring,and catalytic material doping,providing a comprehensive analysis of the strengths and limitations of each approach.Furthermore,it offers prospects for the future development of magnesium-based hydrogen storage materials by integrating current theoretical and experimental research findings.展开更多
Pitch is an excellent precursor for the production of hard carbon,with pre-oxidation crucial process in the fabrication.The structural changes in the different molecular components of pitch during thermochemical treat...Pitch is an excellent precursor for the production of hard carbon,with pre-oxidation crucial process in the fabrication.The structural changes in the different molecular components of pitch during thermochemical treatment are a key factor in determining the sodium-ion storage of pitchbased hard carbon anodes.We investigated the effects of the different molecular structures in the asphaltene precursor,including aromatic rings and aliphatic chains,on the sodiumion storage behavior of the resulting carbon.We found that polar oxygen functional groups limit the steric hindrance caused by the aromatic rings in pitch,and thus facilitate the introduction of cross-linked structures.During high-temperature carbonization,aromatic rings form a rigid carbon framework that prevents the rearrangement of ordered carbon layers,leading to a short-range disordered carbon structure and promotes the production of closed pores.For example,a material prepared from asphaltene,which contains a large number of oxygen-containing functional groups and macromolecular aromatic rings,using pre-oxidation at 300℃ and carbonization at 1200℃ had a reversible capacity of 316.7 mAh g^(−1) when used as the anode for sodium ion batteries.Our research provides a theoretical basis for the selection of raw materials for the development of high-quality pitch-based hard carbons.展开更多
Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim ...Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.展开更多
Unsecured legacy wells pose significant risks to carbon capture and storage(CCS)as they present potential leakage pathways for stored CO_(2) to return to the atmosphere.In the UK,legacy wells must be assessed for a ca...Unsecured legacy wells pose significant risks to carbon capture and storage(CCS)as they present potential leakage pathways for stored CO_(2) to return to the atmosphere.In the UK,legacy wells must be assessed for a carbon storage permit to be granted and high-risk wells require costly remediation.We use a well risk assessment scheme to evaluate the risk of wells in the Southern North Sea.We then combine our well risk assessment with investigation using the analytical tool CO2BLOCK,which relies on a gravity current model to estimate pressure and plume migration distances.We evaluate the Viking,Camelot and Poseidon projects,which plan to inject CO_(2) into the depleted reservoirs of Southern North Sea gas fields.Carbon dioxide plumes are typically several kilometers wide,and it should be possible to avoid plume migration to high-risk legacy wells.In contrast,pressure fields produced by CO_(2) injection are tens of kilometers wide and low magnitude pressure increases frequently extend beyond the bounds of storage licence areas.The pressure fields encounter hundreds of wells and in the cases of the Camelot and Poseidon projects,interact with each other.展开更多
Magnesium hydride(MgH_(2)) demonstrates immense potential as a solid-state hydrogen storage material,while its commercial utilization is impeded by the elevated operating temperature and sluggish reaction kinetics.Her...Magnesium hydride(MgH_(2)) demonstrates immense potential as a solid-state hydrogen storage material,while its commercial utilization is impeded by the elevated operating temperature and sluggish reaction kinetics.Herein,a MOF derived multi-phase FeNi_(3)-S catalyst was specially designed for efficient hydrogen storage in MgH_(2).Experiments confirmed that the incorporation of FeNi_(3)-S into MgH_(2) significantly lowered the desorption temperature and accelerated the kinetics of hydrogen desorption and reabsorption.The initial dehydrogenation temperature of the MgH_(2)+10 wt% FeNi_(3)-S composite was 202 ℃,which was 123 ℃ lower than that of pure MgH_(2).At 325 ℃,the MgH_(2)+10 wt% FeNi_(3)-S composite released 6.57 wt% H_(2)(fully dehydrogenated) within 1000 s.Remarkably,MgH_(2)+ 10 wt% FeNi_(3)-S composite initiated rehydrogenation at room temperature and rapidly absorbed 2.49 wt% H_(2) within 30 min at 100 ℃.Moreover,6.3 wt% H_(2) was still retained after 20 cycles at 300 ℃,demonstrating the superior cycling performance of the MgH_(2)+10 wt% FeNi_(3)-S composite.The activation energy fitting calculations further evidenced the addition of FeNi_(3)-S enhanced the de/resorption kinetics of MgH_(2)(E_(a)= 98.6 k J/mol and 43.3 k J/mol,respectively).Through phase and microstructural analysis,it was determined that the exceptional hydrogen storage performance of the composite was attributed to the in-situ formation of Mg/Mg_(2)Ni + Fe/MgS and MgH_(2)/Mg_(2)NiH_(4)+Fe/MgS hydrogen storage systems.Further mechanistic analysis revealed that Mg_(2)Ni/Mg_(2)NiH_(4) served as “hydrogen pump” and Fe/Mg S served as “hydrogen diffusion channel”,thus accelerating the dissociation and recombination of hydrogen molecules.In conclusion,this work offers insight into catalysts combining transition metal alloys and transition metal sulfide for exerting muti-phase synergistic effect on boosting the dehydrogenation/hydrogenation reactions of MgH_(2),which can also inspire future pioneering work on designing and fabricating high efficient catalysts in other energy storage related areas.展开更多
In response to the actual demands of the energy storage type organic Rankine power generation cycle,this study proposes a new type of jacketed shell and tube heat exchanger with integrated cold storage and heat exchan...In response to the actual demands of the energy storage type organic Rankine power generation cycle,this study proposes a new type of jacketed shell and tube heat exchanger with integrated cold storage and heat exchange.N-tedecane is selected as the phase change material for cold storage,low-temperature water as the cold source,and R134a as the heat source.The phase change material for cold storage is filled inside the jacket tube of the heat exchanger.Cold fluid is introduced into the inner tube to cause the phase change material to condense and store cold.After the cold storage is completed,R134a flows in from the shell side and condenses through heat exchange with the solidified phase change material for energy storage.This study discusses the influence laws of different cold water mass flow rates and temperatures on the cold storage performance of this heat exchanger,and analyzes the condensation effect of R134a.The results show that when the mass flow rate is 0.5 kg/s and the cold water temperature is between 3 and 4℃,the average power of the energy storage heat exchanger in the condensation experiment is 80W,and the average convective heat transfer coefficient is 110.73 W/(m^(2)⋅K).This research provides an experimental basis for the development of energy storage organic Rankine power generation cycles.展开更多
The pursuit of high energy density and sustainable energy storage devices has been the target of many researchers.However,safety issues such as the susceptibility of conventional liquid electrolytes to leakage and fla...The pursuit of high energy density and sustainable energy storage devices has been the target of many researchers.However,safety issues such as the susceptibility of conventional liquid electrolytes to leakage and flammability,as well as performance degradation due to uncontrollable dendrite growth in liquid electrolytes,have been limiting the further development of energy storage devices.In this regard,gel polymer electrolytes(GPEs)based on lignocellulosic(cellulose,hemicellulose,lignin)have attracted great interest due to their high thermal stability,excellent electrolyte wettability,and natural abundance.Therefore,in this critical review,a comprehensive overview of the current challenges faced by GPEs is presented,followed by a detailed description of the opportunities and advantages of lignocellulosic materials for the fabrication of GPEs for energy storage devices.Notably,the key properties and corresponding construction strategies of GPEs for energy storage are analyzed and discussed from the perspective of lignocellulose for the first time.Moreover,the future challenges and prospects of lignocellulose-mediated GPEs in energy storage applications are also critically reviewed and discussed.We sincerely hope this review will stimulate further research on lignocellulose-mediated GPEs in energy storage and provide meaningful directions for the strategy of designing advanced GPEs.展开更多
Developing efficient catalysts is pivotal for advancing MgH_(2)-based hydrogen storage systems.In this study,a novel catalyst,graphene oxide-supported oxygen vacancy-rich Co_(3)O_(4)and Ni nanoparticles(Ni-OV-C@GO),wa...Developing efficient catalysts is pivotal for advancing MgH_(2)-based hydrogen storage systems.In this study,a novel catalyst,graphene oxide-supported oxygen vacancy-rich Co_(3)O_(4)and Ni nanoparticles(Ni-OV-C@GO),was synthesized to enhance the hydrogen storage performance of MgH_(2).The catalyst dramatically improved the kinetics of MgH_(2),lowering the initial hydrogen desorption temperature of Ni-OV-C@GO-MgH_(2)-7 to 438 K,which is 386 K lower than that of as-milled MgH_(2).The composite achieved 5.0 wt%hydrogen absorption at 423 K within 600 s and retained 97.3%capacity after 30 cycles.Notably,the activation energy for H_(2)desorption was reduced to 40.78 kJ/mol,an 80%decrease compared to pristine MgH_(2).The in-situ formation of CoMg_(2)/CoMg_(2)H_(5)and Mg_(2)Ni/Mg_(2)NiH_(4)acted as“hydrogen pumps”,facilitating multiple hydrogen transfer pathways.Additionally,oxygen vacancies elongated Mg-H bonds,enhancing dehydrogenation kinetics through catalytic effects.These findings provide valuable insights into improving hydrogen adsorption and desorption kinetics in MgH_(2)-based systems.展开更多
Underground hydrogen storage has gained interest in recent years due to the enormous demand for clean energy.Hydrogen is more diffusive than air,with a smaller density and lower viscosity.These unique properties intro...Underground hydrogen storage has gained interest in recent years due to the enormous demand for clean energy.Hydrogen is more diffusive than air,with a smaller density and lower viscosity.These unique properties introduce distinctive hydrodynamic phenomena in hydrogen storage,one of which is fingering.Fingering could induce the fluid trapped in small clusters of pores,leading to a dramatic decrease in hydrogen saturation and a lower recovery rate.In this study,numerical simulations are performed at the microscopic scale to understand the evolution of hydrogen saturation and the impacts of injection and withdrawal cycles.Two sets of micromodels with different porosity(0.362 and 0.426)and minimum sizes of pore throats(0.362 mm and 0.181 mm)are developed in the numerical model.A parameter analysis is then conducted to understand the influence of injection velocity(in the range of 10^(-2)m/s to 10^(-5)m/s)and porous structure on the fingering pattern,followed by an image analysis to capture the evolution of the fingering pattern.Viscous fingering,capillary fingering,and crossover fingering are observed and identified under different boundary conditions.The fractal dimension,specific area,mean angle,and entropy of fingers are proposed as geometric descriptors to characterize the shape of the fingering pattern.When porosity increases from 0.362 to 0.426,the saturation of hydrogen increases by 26.2%.Narrower pore throats elevate capillary resistance,which hinders fluid invasion.These results underscore the importance of pore structures and the interaction between viscous and capillary forces for hydrogen recovery efficiency.This work illuminates the influence of the pore structures and the fluid properties on the immiscible displacement of hydrogen and can be further extended to optimize the injection strategy of hydrogen in underground hydrogen storage.展开更多
Sichuan sausages with moisture contents of 40%,45%,50%,and 60% were stored at-18℃for durations of 0,2,4,6,and 8 weeks to evaluate the effect of moisture content on the quality attributes of Sichuan sausages during fr...Sichuan sausages with moisture contents of 40%,45%,50%,and 60% were stored at-18℃for durations of 0,2,4,6,and 8 weeks to evaluate the effect of moisture content on the quality attributes of Sichuan sausages during frozen storage.Product indicators including pH,colour,thiobarbituric acid reactive substances(TBARS),total volatile basic nitrogen(TVB-N),texture,electronic nose(E-nose)response,and water-holding capacity(thawing and cooking losses)were determined.The results indicated that as storage time increased,water retention in Sichuan sausages with different moisture contents decreased,while the degree of protein and lipid oxidation increased.This led to an increase in pH value,a colour shift from red-bright to grey-brown,and a deterioration in palatability.Among the samples,sausages with 50% moisture content exhibited the lowest thawing and cooking losses,indicating superior water-holding capacity.After 8 weeks of storage,TBARS and TVB-N values for the 50% moisture group were 19.5%and 2.5%lower,respectively,than those of the 40%and 45%moisture groups,indicating a reduced degree of oxidation.Furthermore,Sichuan sausage with 50%moisture content demonstrated an appropriate pH and colour difference,along with excellent texture and flavour,as evidenced by its higher toughness and satisfactory hardness.In conclusion,Sichuan sausage with 50% moisture content demonstrated the highest overall quality under frozen storage conditions.展开更多
Photo-assisted flexible energy storage devices,combining photoelectric conversion and electrochemical energy storage,emerge as an innovative solution for sustainable energy systems.This review comprehensively summariz...Photo-assisted flexible energy storage devices,combining photoelectric conversion and electrochemical energy storage,emerge as an innovative solution for sustainable energy systems.This review comprehensively summarizes recent advances in photo-assisted flexible energy storage technology,covering material design,working mechanisms,and practical applications.We systematically examine diverse electrode materials,such as metal oxides,metal sulfides,organic photosensitive materials,and composites,emphasizing their roles in boosting device performance.Special focus is placed on emerging technologies—including heterostructure engineering,surface modification,and intelligent control systems—that have notably enhanced energy conversion efficiency and storage capacity.The review also discusses current challenges,such as material stability,conversion efficiency,and standardization,and proposes strategic directions for future development.Recent breakthroughs in photo-assisted supercapacitors,lithium-based batteries,zinc-based batteries,and other innovative storage systems are critically assessed,offering key insights into their practical application potential in wearable electronics,self-powered sensors,and beyond.This comprehensive analysis establishes a framework for understanding the current status of photo-assisted flexible energy storage technology and guides future research toward high-performance,sustainable energy storage solutions.展开更多
Hard carbon(HC)remains a leading anode candidate for sodium-ion storage,yet its application is hindered by low initial Coulombic efficiency(ICE)and limited plateau capacity due to uncontrolled defect density and open ...Hard carbon(HC)remains a leading anode candidate for sodium-ion storage,yet its application is hindered by low initial Coulombic efficiency(ICE)and limited plateau capacity due to uncontrolled defect density and open porosity.Here,we propose a scalable dual-regulation strategy that simultaneously tunes pore mouth size and defect chemistry to enhance sodium storage performance.Using phenol-formaldehyde resin as the carbon precursor and phosphorus pentoxide(P_(2)O_(5))as a bifunctional sacrificial template and dopant source,we synthesize phosphorus-functionalized hard carbon(PF-PHC)featuring a high density of closed pores with well-confined sub-nanometer pore entrances.The in-situ sublimation of P_(2)O_(5) during pyrolysis promotes the formation of closed-pore architectures,while residual phosphorus atoms effectively passivate vacancy-type defects,thereby reducing irreversible Na+adsorption and mitigating excessive solid electrolyte interphase(SEI)formation.As a result,PF-PHC achieves an ICE of 89.3%and a plateau capacity of 289 mAh g^(−1).In-situ characterizations reveal that regulating pore mouth dimensions decouples Na+and solvent access,enabling highly selective ion transport and stable interfacial chemistry.Sodium-ion hybrid capacitors(SIHCs)assembled based on PF-PHC deliver exceptional rate performance and outstanding long-term cycling stability,retaining 98.2%after 10,000 cycles at 2 A g^(−1).This study establishes pore mouth engineering as a robust and scalable design principle for advancing next-generation HC-based sodium storage materials.展开更多
Laser-induced graphene(LIG)has emerged as a versatile,sustainable material for advanced energy technologies,offering a scalable,catalyst-free,and programmable method to directly convert carbon-rich substrates into por...Laser-induced graphene(LIG)has emerged as a versatile,sustainable material for advanced energy technologies,offering a scalable,catalyst-free,and programmable method to directly convert carbon-rich substrates into porous,conductive graphene.This single-step laser writing approach enables flexible,patternable electrodes without complex post-processing.With its high conductivity,large surface area,and tunable chemistry,LIG is well-suited for diverse applications including batteries,supercapacitors,dyesensitized solar cells(DSSCs),dual cells,water-splitting electrocatalysis,and triboelectric nanogenerators(TENGs).In energy storage,LIG improves charge transport,buffer volume changes,and provides a robust framework,enhancing capacitance,cycling stability,and rate capability.Its catalytic activity is further boosted through heteroatom doping or transition-metal incorporation,achieving HER/OER performance comparable to noble metals.In DSSCs,LIG functions as a flexible,low-cost alternative to platinum counter electrodes,while in TENGs,its strong triboelectric response and mechanical durability enable integration into self-powered,wearable systems.Despite the immense recent progress in this field,challenges remain regarding the scalability,long-term operational stability,and interfacial engineering of LIGbased composites.Further exploration into multi-laser systems,substrate diversity,and synergistic composite architectures will be crucial to optimizing device performance and reliability.Nevertheless,the green,cost-efficient,rapid,and programmable synthesis of LIG poses it as a cornerstone potential building block material in the development of future sustainable and multifunctional energy systems.Throughout the review we compare fabrication strategies,summarize performance metrics against relevant benchmarks,and identifying common mechanistic advantages conferred by the laser writing process.Remaining challenges-such as scale-up,precursor diversity,long-term environmental stability,and integration into complex device architectures-are outlined alongside prospective research directions.Collectively,this review article provides an in-depth perspective on the multifunctional nature of LIG,underscoring its promise in next-generation energy storage,conversion,harvesting applications,and laying the groundwork for future research directions.展开更多
As renewable energy penetration continues to rise,enhancing power system flexibility has become a critical requirement.Photovoltaic–storage–charging stations(PSCSs)are key components for enhancing local regulation c...As renewable energy penetration continues to rise,enhancing power system flexibility has become a critical requirement.Photovoltaic–storage–charging stations(PSCSs)are key components for enhancing local regulation capability and promoting renewable integration.However,evaluating the adjustable capability of such hybrid stations while considering security constraints remains a major challenge.This paper first analyzes the adjustable capabilities of all the resources within such a station based on the power-energy boundary(PEB)model.Then,an optimal formulation is proposed to obtain the adjusted parameters of the aggregate feasible region(AFR)model,which embeds low-dimensional linear models within high-dimensional linear models to improve the accuracy.To solve this formulation,it is transformed using duality theory and an alternating optimization algorithm is designed to obtain the solution.Finally,a multi-station adjustable capability aggregation method considering security constraints is introduced.Simulation results verify that the proposed method effectively reduces infeasible regions and improves smoothness of aggregated boundaries,providing an accurate and practical tool for flexibility evaluation in PSCSs and offering guidance for aggregators and system planners.展开更多
Although wind energy is volatile,the output of a wind-storage plant is partially dispatchable,making it a promising paradigm on the generation side.A grid-friendly wind-storage plant ought to be able to continuously o...Although wind energy is volatile,the output of a wind-storage plant is partially dispatchable,making it a promising paradigm on the generation side.A grid-friendly wind-storage plant ought to be able to continuously output the desired power over a certain period of time.This paper proposes a dependable dynamic capacity provision scheme of a wind-storage plant over a daily horizon.It stipulates a minimum number of periods during which the committed capacity must be fulfilled and a maximum mismatch during the remaining periods when the desired power output is not achievable.In the general case,the day-ahead piecewise constant capacity provision results in a two-stage stochastic program formulated as a mixed-integer linear program.Specifically,for constant capacity provision,a decomposition algorithm is developed to determine the global optimal solution,and the complexity grows linearly with the number of scenarios.Given the committed capacity trajectory,the real-time operation problem is modeled as a four-state stochastic dynamic program.The discrete state-action values are derived recursively via the principle of optimality.Real-time dispatch actions are generated by using the action-value tabular leveraging inexact ultra-short-term forecasts.Numerical tests over one year demonstrate that the proposed method successfully fulfills reliable operation on 355 days and achieve an optimality gap of 9.47%compared with the ex-post optimum,which is comparable to model predictive control using exact 2–3-hour-ahead wind power forecasts.展开更多
This paper investigates the detection and mitigation of coordinated cyberattacks on Load Frequency Control(LFC)systems integrated with Battery Energy Storage Systems(BESS).As renewable energy sources gain greater pene...This paper investigates the detection and mitigation of coordinated cyberattacks on Load Frequency Control(LFC)systems integrated with Battery Energy Storage Systems(BESS).As renewable energy sources gain greater penetration,power grids are becoming increasingly vulnerable to cyber threats,potentially leading to frequency instability and widespread disruptions.We model two significant attack vectors:load-altering attacks(LAAs)and false data injection attacks(FDIAs)that corrupt frequency measurements.These are analyzed for their impact on grid frequency stability in both linear and nonlinear LFC models,incorporating generation rate constraints and nonlinear loads.A coordinated attack strategy is presented,combining LAAs and FDIAs to achieve stealthiness by concealing frequency deviations from system operators,thereby maximizing disruption while evading traditional detection.To counteract these threats,we propose an Unknown Input Observer(UIO)-based detection framework for linear and nonlinear LFCs.The UIO is designed using linear matrix inequalities(LMIs)to estimate system states while isolating unknown attack inputs,enabling attack detection through monitoring measurement residuals against a predefined threshold.For mitigation,we leverage BESS capabilities with two adaptive strategies:dynamic mitigation for dynamic LAAs,which tunes BESS parameters to enhance the system’s stability margin and accelerate convergence to equilibrium;and staticmitigation for static LAAs and FDIAs.Simulations show that the UIO achieves high detection accuracy,with residuals exceeding thresholds promptly under coordinated attacks,even in nonlinear models.Mitigation strategies reduce frequency deviations by up to 80%compared to unmitigated cases,restoring stability within seconds.展开更多
Artificial intelligence(AI)based models have been used to predict the structural,optical,mechanical,and electrochemical properties of zinc oxide/graphene oxide nanocomposites.Machine learning(ML)models such as Artific...Artificial intelligence(AI)based models have been used to predict the structural,optical,mechanical,and electrochemical properties of zinc oxide/graphene oxide nanocomposites.Machine learning(ML)models such as Artificial Neural Networks(ANN),Support Vector Regression(SVR),Multilayer Perceptron(MLP),and hybrid,along with fuzzy logic tools,were applied to predict the different properties like wavelength at maximum intensity(444 nm),crystallite size(17.50 nm),and optical bandgap(2.85 eV).While some other properties,such as energy density,power density,and charge transfer resistance,were also predicted with the help of datasets of 1000(80:20).In general,the energy parameters were predicted more accurately by hybrid models.The hydrothermal method was used to synthesize graphene oxide(GO)and zinc oxide(ZnO)nanocomposites.The increased surface area,conductivity,and stability of graphene oxide in zinc oxide nanoparticles make the composite an ideal option for energy storage.X-ray diffraction(XRD)confirmed the crystallite size of 17.41 nm for the nanocomposite and the presence of GO(12.8○)peaks.The scanning electron microscope(SEM)showed anchored wrinkled GO sheets on zinc oxide with an average particle size of 2.93μm.Energy-dispersive X-ray spectroscopy(EDX)confirmed the elemental composition,and Fouriertransform infrared spectroscopy(FTIR)revealed the impact of GO on functional groups and electrochemical behavior.Photoluminescence(PL)wavelength of(439 nm)and band gap of(2.81 eV)show that the material is suitable for energy applications in nanocomposites.Smart nanocomposite materials with improved performance in energy storage and related applications were fabricated by combining synthesis,characterization,fuzzy logic,and machine learning in this work.展开更多
In wind power transmission via modular multilevel converter based high voltage direct current(MMCHVDC)systems,under traditional control strategies,MMC-HVDCcannot provide inertia support to the receiving-end grid(REG)d...In wind power transmission via modular multilevel converter based high voltage direct current(MMCHVDC)systems,under traditional control strategies,MMC-HVDCcannot provide inertia support to the receiving-end grid(REG)during disturbances.Moreover,due to the frequency decoupling between the two ends of the MMCHVDC,the sending-end wind farm(SEWF)cannot obtain the frequency variation information of the REG to provide inertia response.Therefore,this paper proposes a novel coordinated source-network-storage inertia control strategy based on wind power transmission via MMC-HVDC system.First,the grid-side MMC station(GS-MMC)maps the frequency variations of the REG to direct current(DC)voltage variations through the frequency mapping control,and uses submodule capacitor energy to provide inertial power.Then,the wind farm-side MMC station(WF-MMC)restores the DC voltage variations to frequency variations through the frequency restoration control and power loss compensation,providing real-time frequency information for the wind farm.Finally,based on real-time frequency information,thewind farmutilizes the rotor kinetic energy and energy storage to provide fast and lasting power support through the wind-storage coordinated inertia control strategy.Meanwhile,when the wind turbines withdraw from the inertia response phase,the energy storage can increase the power output to compensate for the power deficit,preventing secondary frequency drops.Furthermore,this paper uses small-signal analysis to determine the appropriate values for the key parameters of the proposed control strategy.A simulation model of the wind power transmission via MMCHVDC system is built in MATLAB/Simulink environment to validate and evaluate the proposed method.The results show that the proposed coordinated control strategy can effectively improve the system inertia level and avoid the secondary frequency drop under the load sudden increase condition.展开更多
In order to address environmental pollution and resource depletion caused by traditional power generation,this paper proposes an adaptive iterative dynamic-balance optimization algorithm that integrates the Improved D...In order to address environmental pollution and resource depletion caused by traditional power generation,this paper proposes an adaptive iterative dynamic-balance optimization algorithm that integrates the Improved Dung Beetle Optimizer(IDBO)with VariationalMode Decomposition(VMD).The IDBO-VMD method is designed to enhance the accuracy and efficiency of wind-speed time-series decomposition and to effectively smooth photovoltaic power fluctuations.This study innovatively improves the traditional variational mode decomposition(VMD)algorithm,and significantly improves the accuracy and adaptive ability of signal decomposition by IDBO selfoptimization of key parameters K and a.On this basis,Fourier transform technology is used to define the boundary point between high frequency and low frequency signals,and a targeted energy distribution strategy is proposed:high frequency fluctuations are allocated to supercapacitors to quickly respond to transient power fluctuations;Lowfrequency components are distributed to lead-carbon batteries,optimizing long-term energy storage and scheduling efficiency.This strategy effectively improves the response speed and stability of the energy storage system.The experimental results demonstrate that the IDBO-VMD algorithm markedly outperforms traditional methods in both decomposition accuracy and computational efficiency.Specifically,it effectively reduces the charge–discharge frequency of the battery,prolongs battery life,and optimizes the operating ranges of the state-of-charge(SOC)for both leadcarbon batteries and supercapacitors.In addition,the energy management strategy based on the algorithm not only improves the overall energy utilization efficiency of the system,but also shows excellent performance in the dynamic management and intelligent scheduling of renewable energy generation.展开更多
基金Supported by Design and Performance Study of High-flux Metal Hydride Reactor Based on the Bionic Optimization(2078262)the‘Four-Chain’Integration Project at the Qinchuangyuan Chief Platform(S2025-YF-ZDXM)。
文摘As one of the most promising new energy sources,hydrogen energy is expected to usher in a full-fledged“hydrogen economy”in the 21st century.Compared with traditional high-pressure gaseous and cryogenic liquid hydrogen storage methods,solid-state chemical hydrogen storage shows significant advantages in safety,high efficiency,and cost-effectiveness.Magnesium-based lightweight hydrogen storage materials have attracted widespread attention due to their high gravimetric hydrogen storage density(7.6%)and favorable reversibility.However,their sluggish reaction kinetics and stringent operating conditions(with H2 release temperatures exceeding 350°C and H2 absorption pressures above 4 MPa)pose major challenges for practical applications.Domestic and international researchers have conducted in-depth studies to address these issues,achieving substantial progress in the modification of magnesium-based hydrogen storage alloys.This paper systematically elaborates on major modification techniques such as alloying,nanostructuring,and catalytic material doping,providing a comprehensive analysis of the strengths and limitations of each approach.Furthermore,it offers prospects for the future development of magnesium-based hydrogen storage materials by integrating current theoretical and experimental research findings.
文摘Pitch is an excellent precursor for the production of hard carbon,with pre-oxidation crucial process in the fabrication.The structural changes in the different molecular components of pitch during thermochemical treatment are a key factor in determining the sodium-ion storage of pitchbased hard carbon anodes.We investigated the effects of the different molecular structures in the asphaltene precursor,including aromatic rings and aliphatic chains,on the sodiumion storage behavior of the resulting carbon.We found that polar oxygen functional groups limit the steric hindrance caused by the aromatic rings in pitch,and thus facilitate the introduction of cross-linked structures.During high-temperature carbonization,aromatic rings form a rigid carbon framework that prevents the rearrangement of ordered carbon layers,leading to a short-range disordered carbon structure and promotes the production of closed pores.For example,a material prepared from asphaltene,which contains a large number of oxygen-containing functional groups and macromolecular aromatic rings,using pre-oxidation at 300℃ and carbonization at 1200℃ had a reversible capacity of 316.7 mAh g^(−1) when used as the anode for sodium ion batteries.Our research provides a theoretical basis for the selection of raw materials for the development of high-quality pitch-based hard carbons.
文摘Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.
基金supported by the Natural Environment Research Council[grant number NE/S007415/1]Shell as iCASE sponsors。
文摘Unsecured legacy wells pose significant risks to carbon capture and storage(CCS)as they present potential leakage pathways for stored CO_(2) to return to the atmosphere.In the UK,legacy wells must be assessed for a carbon storage permit to be granted and high-risk wells require costly remediation.We use a well risk assessment scheme to evaluate the risk of wells in the Southern North Sea.We then combine our well risk assessment with investigation using the analytical tool CO2BLOCK,which relies on a gravity current model to estimate pressure and plume migration distances.We evaluate the Viking,Camelot and Poseidon projects,which plan to inject CO_(2) into the depleted reservoirs of Southern North Sea gas fields.Carbon dioxide plumes are typically several kilometers wide,and it should be possible to avoid plume migration to high-risk legacy wells.In contrast,pressure fields produced by CO_(2) injection are tens of kilometers wide and low magnitude pressure increases frequently extend beyond the bounds of storage licence areas.The pressure fields encounter hundreds of wells and in the cases of the Camelot and Poseidon projects,interact with each other.
基金supported by the National Key R&D Program of China (No.2022YFB3803703)the National Natural Science Foundation of China (Nos.52071141,52271212,52201250,51771056,22305104)+1 种基金the Natural Science Foundation of Jiangsu Province (No.BK20210893)the Ministry of Science and Technology of the People’s Republic of China (No.G2023014022L)。
文摘Magnesium hydride(MgH_(2)) demonstrates immense potential as a solid-state hydrogen storage material,while its commercial utilization is impeded by the elevated operating temperature and sluggish reaction kinetics.Herein,a MOF derived multi-phase FeNi_(3)-S catalyst was specially designed for efficient hydrogen storage in MgH_(2).Experiments confirmed that the incorporation of FeNi_(3)-S into MgH_(2) significantly lowered the desorption temperature and accelerated the kinetics of hydrogen desorption and reabsorption.The initial dehydrogenation temperature of the MgH_(2)+10 wt% FeNi_(3)-S composite was 202 ℃,which was 123 ℃ lower than that of pure MgH_(2).At 325 ℃,the MgH_(2)+10 wt% FeNi_(3)-S composite released 6.57 wt% H_(2)(fully dehydrogenated) within 1000 s.Remarkably,MgH_(2)+ 10 wt% FeNi_(3)-S composite initiated rehydrogenation at room temperature and rapidly absorbed 2.49 wt% H_(2) within 30 min at 100 ℃.Moreover,6.3 wt% H_(2) was still retained after 20 cycles at 300 ℃,demonstrating the superior cycling performance of the MgH_(2)+10 wt% FeNi_(3)-S composite.The activation energy fitting calculations further evidenced the addition of FeNi_(3)-S enhanced the de/resorption kinetics of MgH_(2)(E_(a)= 98.6 k J/mol and 43.3 k J/mol,respectively).Through phase and microstructural analysis,it was determined that the exceptional hydrogen storage performance of the composite was attributed to the in-situ formation of Mg/Mg_(2)Ni + Fe/MgS and MgH_(2)/Mg_(2)NiH_(4)+Fe/MgS hydrogen storage systems.Further mechanistic analysis revealed that Mg_(2)Ni/Mg_(2)NiH_(4) served as “hydrogen pump” and Fe/Mg S served as “hydrogen diffusion channel”,thus accelerating the dissociation and recombination of hydrogen molecules.In conclusion,this work offers insight into catalysts combining transition metal alloys and transition metal sulfide for exerting muti-phase synergistic effect on boosting the dehydrogenation/hydrogenation reactions of MgH_(2),which can also inspire future pioneering work on designing and fabricating high efficient catalysts in other energy storage related areas.
基金the the basic scientific research Funds project of Heilongjiang Universities[grant numbers 2024-KYYWF-0554].
文摘In response to the actual demands of the energy storage type organic Rankine power generation cycle,this study proposes a new type of jacketed shell and tube heat exchanger with integrated cold storage and heat exchange.N-tedecane is selected as the phase change material for cold storage,low-temperature water as the cold source,and R134a as the heat source.The phase change material for cold storage is filled inside the jacket tube of the heat exchanger.Cold fluid is introduced into the inner tube to cause the phase change material to condense and store cold.After the cold storage is completed,R134a flows in from the shell side and condenses through heat exchange with the solidified phase change material for energy storage.This study discusses the influence laws of different cold water mass flow rates and temperatures on the cold storage performance of this heat exchanger,and analyzes the condensation effect of R134a.The results show that when the mass flow rate is 0.5 kg/s and the cold water temperature is between 3 and 4℃,the average power of the energy storage heat exchanger in the condensation experiment is 80W,and the average convective heat transfer coefficient is 110.73 W/(m^(2)⋅K).This research provides an experimental basis for the development of energy storage organic Rankine power generation cycles.
基金supported by the National Natural Science Foundation of China(32501592,32271814,32301530,32471806)Young Elite Scientist Sponsorship Program by Cast(No.YESS20230242)+3 种基金Natural Science Foundation of Tianjin(23JCZDJC00630,24JCZDJC00630)the China Postdoctoral Science Foundation(2023M740563)Tianjin Enterprise Technology Commissioner Project(25YDTPJC00690)China Scholarship Council(202408120091,202408120105).
文摘The pursuit of high energy density and sustainable energy storage devices has been the target of many researchers.However,safety issues such as the susceptibility of conventional liquid electrolytes to leakage and flammability,as well as performance degradation due to uncontrollable dendrite growth in liquid electrolytes,have been limiting the further development of energy storage devices.In this regard,gel polymer electrolytes(GPEs)based on lignocellulosic(cellulose,hemicellulose,lignin)have attracted great interest due to their high thermal stability,excellent electrolyte wettability,and natural abundance.Therefore,in this critical review,a comprehensive overview of the current challenges faced by GPEs is presented,followed by a detailed description of the opportunities and advantages of lignocellulosic materials for the fabrication of GPEs for energy storage devices.Notably,the key properties and corresponding construction strategies of GPEs for energy storage are analyzed and discussed from the perspective of lignocellulose for the first time.Moreover,the future challenges and prospects of lignocellulose-mediated GPEs in energy storage applications are also critically reviewed and discussed.We sincerely hope this review will stimulate further research on lignocellulose-mediated GPEs in energy storage and provide meaningful directions for the strategy of designing advanced GPEs.
基金supported by the National Key Research and Development Program of China(Grant No.2022YFB4003200)Nature Science Foundation of Guangxi(Grant No.2024GXNSFDA010044)the National Natural Science Foundation of China(Grant Nos.52101245,U20A20237,U24A2044).
文摘Developing efficient catalysts is pivotal for advancing MgH_(2)-based hydrogen storage systems.In this study,a novel catalyst,graphene oxide-supported oxygen vacancy-rich Co_(3)O_(4)and Ni nanoparticles(Ni-OV-C@GO),was synthesized to enhance the hydrogen storage performance of MgH_(2).The catalyst dramatically improved the kinetics of MgH_(2),lowering the initial hydrogen desorption temperature of Ni-OV-C@GO-MgH_(2)-7 to 438 K,which is 386 K lower than that of as-milled MgH_(2).The composite achieved 5.0 wt%hydrogen absorption at 423 K within 600 s and retained 97.3%capacity after 30 cycles.Notably,the activation energy for H_(2)desorption was reduced to 40.78 kJ/mol,an 80%decrease compared to pristine MgH_(2).The in-situ formation of CoMg_(2)/CoMg_(2)H_(5)and Mg_(2)Ni/Mg_(2)NiH_(4)acted as“hydrogen pumps”,facilitating multiple hydrogen transfer pathways.Additionally,oxygen vacancies elongated Mg-H bonds,enhancing dehydrogenation kinetics through catalytic effects.These findings provide valuable insights into improving hydrogen adsorption and desorption kinetics in MgH_(2)-based systems.
基金supported by the National Key Research and Development Project(Grant No.2023YFE0110900)the National Natural Science Foundation of China(Grant Nos.42320104003,42477168).
文摘Underground hydrogen storage has gained interest in recent years due to the enormous demand for clean energy.Hydrogen is more diffusive than air,with a smaller density and lower viscosity.These unique properties introduce distinctive hydrodynamic phenomena in hydrogen storage,one of which is fingering.Fingering could induce the fluid trapped in small clusters of pores,leading to a dramatic decrease in hydrogen saturation and a lower recovery rate.In this study,numerical simulations are performed at the microscopic scale to understand the evolution of hydrogen saturation and the impacts of injection and withdrawal cycles.Two sets of micromodels with different porosity(0.362 and 0.426)and minimum sizes of pore throats(0.362 mm and 0.181 mm)are developed in the numerical model.A parameter analysis is then conducted to understand the influence of injection velocity(in the range of 10^(-2)m/s to 10^(-5)m/s)and porous structure on the fingering pattern,followed by an image analysis to capture the evolution of the fingering pattern.Viscous fingering,capillary fingering,and crossover fingering are observed and identified under different boundary conditions.The fractal dimension,specific area,mean angle,and entropy of fingers are proposed as geometric descriptors to characterize the shape of the fingering pattern.When porosity increases from 0.362 to 0.426,the saturation of hydrogen increases by 26.2%.Narrower pore throats elevate capillary resistance,which hinders fluid invasion.These results underscore the importance of pore structures and the interaction between viscous and capillary forces for hydrogen recovery efficiency.This work illuminates the influence of the pore structures and the fluid properties on the immiscible displacement of hydrogen and can be further extended to optimize the injection strategy of hydrogen in underground hydrogen storage.
基金Supported by National Modern Agricultural Industry Technology System Sichuan Pig Innovation Team(SCCXTD-2026-8)Sichuan Science and Technology Program(2025ZYD0049)"Challenge and Leadership"Project for Key Core Technologies of Sui Ning in Sichuan(2025SNKBZ19).
文摘Sichuan sausages with moisture contents of 40%,45%,50%,and 60% were stored at-18℃for durations of 0,2,4,6,and 8 weeks to evaluate the effect of moisture content on the quality attributes of Sichuan sausages during frozen storage.Product indicators including pH,colour,thiobarbituric acid reactive substances(TBARS),total volatile basic nitrogen(TVB-N),texture,electronic nose(E-nose)response,and water-holding capacity(thawing and cooking losses)were determined.The results indicated that as storage time increased,water retention in Sichuan sausages with different moisture contents decreased,while the degree of protein and lipid oxidation increased.This led to an increase in pH value,a colour shift from red-bright to grey-brown,and a deterioration in palatability.Among the samples,sausages with 50% moisture content exhibited the lowest thawing and cooking losses,indicating superior water-holding capacity.After 8 weeks of storage,TBARS and TVB-N values for the 50% moisture group were 19.5%and 2.5%lower,respectively,than those of the 40%and 45%moisture groups,indicating a reduced degree of oxidation.Furthermore,Sichuan sausage with 50%moisture content demonstrated an appropriate pH and colour difference,along with excellent texture and flavour,as evidenced by its higher toughness and satisfactory hardness.In conclusion,Sichuan sausage with 50% moisture content demonstrated the highest overall quality under frozen storage conditions.
基金funded by the National Key Research and Development Program of China(2022YFB3807105)National Natural Science Foundation of China(52090033)+3 种基金State Key Laboratory for Modification of Chemical Fibers and Polymer Materials(KF222318)Jiangsu Province Industry-University-Research Cooperation Project(BY2022799)Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX243534KYCX243521)。
文摘Photo-assisted flexible energy storage devices,combining photoelectric conversion and electrochemical energy storage,emerge as an innovative solution for sustainable energy systems.This review comprehensively summarizes recent advances in photo-assisted flexible energy storage technology,covering material design,working mechanisms,and practical applications.We systematically examine diverse electrode materials,such as metal oxides,metal sulfides,organic photosensitive materials,and composites,emphasizing their roles in boosting device performance.Special focus is placed on emerging technologies—including heterostructure engineering,surface modification,and intelligent control systems—that have notably enhanced energy conversion efficiency and storage capacity.The review also discusses current challenges,such as material stability,conversion efficiency,and standardization,and proposes strategic directions for future development.Recent breakthroughs in photo-assisted supercapacitors,lithium-based batteries,zinc-based batteries,and other innovative storage systems are critically assessed,offering key insights into their practical application potential in wearable electronics,self-powered sensors,and beyond.This comprehensive analysis establishes a framework for understanding the current status of photo-assisted flexible energy storage technology and guides future research toward high-performance,sustainable energy storage solutions.
基金supported by the National Natural Science Foundation of China(22269020,U23A20582,42167068)the Gansu Province Higher Education Industry Support Plan Project(2023CYZC-17)+1 种基金2024 Major Cultivation Project for University Research and Innovation Platforms(2024CXPT-10)the Key Project of the Natural Science Foundation of Gansu Province(25JRRA004).
文摘Hard carbon(HC)remains a leading anode candidate for sodium-ion storage,yet its application is hindered by low initial Coulombic efficiency(ICE)and limited plateau capacity due to uncontrolled defect density and open porosity.Here,we propose a scalable dual-regulation strategy that simultaneously tunes pore mouth size and defect chemistry to enhance sodium storage performance.Using phenol-formaldehyde resin as the carbon precursor and phosphorus pentoxide(P_(2)O_(5))as a bifunctional sacrificial template and dopant source,we synthesize phosphorus-functionalized hard carbon(PF-PHC)featuring a high density of closed pores with well-confined sub-nanometer pore entrances.The in-situ sublimation of P_(2)O_(5) during pyrolysis promotes the formation of closed-pore architectures,while residual phosphorus atoms effectively passivate vacancy-type defects,thereby reducing irreversible Na+adsorption and mitigating excessive solid electrolyte interphase(SEI)formation.As a result,PF-PHC achieves an ICE of 89.3%and a plateau capacity of 289 mAh g^(−1).In-situ characterizations reveal that regulating pore mouth dimensions decouples Na+and solvent access,enabling highly selective ion transport and stable interfacial chemistry.Sodium-ion hybrid capacitors(SIHCs)assembled based on PF-PHC deliver exceptional rate performance and outstanding long-term cycling stability,retaining 98.2%after 10,000 cycles at 2 A g^(−1).This study establishes pore mouth engineering as a robust and scalable design principle for advancing next-generation HC-based sodium storage materials.
文摘Laser-induced graphene(LIG)has emerged as a versatile,sustainable material for advanced energy technologies,offering a scalable,catalyst-free,and programmable method to directly convert carbon-rich substrates into porous,conductive graphene.This single-step laser writing approach enables flexible,patternable electrodes without complex post-processing.With its high conductivity,large surface area,and tunable chemistry,LIG is well-suited for diverse applications including batteries,supercapacitors,dyesensitized solar cells(DSSCs),dual cells,water-splitting electrocatalysis,and triboelectric nanogenerators(TENGs).In energy storage,LIG improves charge transport,buffer volume changes,and provides a robust framework,enhancing capacitance,cycling stability,and rate capability.Its catalytic activity is further boosted through heteroatom doping or transition-metal incorporation,achieving HER/OER performance comparable to noble metals.In DSSCs,LIG functions as a flexible,low-cost alternative to platinum counter electrodes,while in TENGs,its strong triboelectric response and mechanical durability enable integration into self-powered,wearable systems.Despite the immense recent progress in this field,challenges remain regarding the scalability,long-term operational stability,and interfacial engineering of LIGbased composites.Further exploration into multi-laser systems,substrate diversity,and synergistic composite architectures will be crucial to optimizing device performance and reliability.Nevertheless,the green,cost-efficient,rapid,and programmable synthesis of LIG poses it as a cornerstone potential building block material in the development of future sustainable and multifunctional energy systems.Throughout the review we compare fabrication strategies,summarize performance metrics against relevant benchmarks,and identifying common mechanistic advantages conferred by the laser writing process.Remaining challenges-such as scale-up,precursor diversity,long-term environmental stability,and integration into complex device architectures-are outlined alongside prospective research directions.Collectively,this review article provides an in-depth perspective on the multifunctional nature of LIG,underscoring its promise in next-generation energy storage,conversion,harvesting applications,and laying the groundwork for future research directions.
基金supported by Science and Technology Project of China Southern Power Grid Company(036000KK52222007(GDKJXM20222121)).
文摘As renewable energy penetration continues to rise,enhancing power system flexibility has become a critical requirement.Photovoltaic–storage–charging stations(PSCSs)are key components for enhancing local regulation capability and promoting renewable integration.However,evaluating the adjustable capability of such hybrid stations while considering security constraints remains a major challenge.This paper first analyzes the adjustable capabilities of all the resources within such a station based on the power-energy boundary(PEB)model.Then,an optimal formulation is proposed to obtain the adjusted parameters of the aggregate feasible region(AFR)model,which embeds low-dimensional linear models within high-dimensional linear models to improve the accuracy.To solve this formulation,it is transformed using duality theory and an alternating optimization algorithm is designed to obtain the solution.Finally,a multi-station adjustable capability aggregation method considering security constraints is introduced.Simulation results verify that the proposed method effectively reduces infeasible regions and improves smoothness of aggregated boundaries,providing an accurate and practical tool for flexibility evaluation in PSCSs and offering guidance for aggregators and system planners.
基金supported by the Smart Grid-National Science and Technology Major Project of China(2024ZD0802000).
文摘Although wind energy is volatile,the output of a wind-storage plant is partially dispatchable,making it a promising paradigm on the generation side.A grid-friendly wind-storage plant ought to be able to continuously output the desired power over a certain period of time.This paper proposes a dependable dynamic capacity provision scheme of a wind-storage plant over a daily horizon.It stipulates a minimum number of periods during which the committed capacity must be fulfilled and a maximum mismatch during the remaining periods when the desired power output is not achievable.In the general case,the day-ahead piecewise constant capacity provision results in a two-stage stochastic program formulated as a mixed-integer linear program.Specifically,for constant capacity provision,a decomposition algorithm is developed to determine the global optimal solution,and the complexity grows linearly with the number of scenarios.Given the committed capacity trajectory,the real-time operation problem is modeled as a four-state stochastic dynamic program.The discrete state-action values are derived recursively via the principle of optimality.Real-time dispatch actions are generated by using the action-value tabular leveraging inexact ultra-short-term forecasts.Numerical tests over one year demonstrate that the proposed method successfully fulfills reliable operation on 355 days and achieve an optimality gap of 9.47%compared with the ex-post optimum,which is comparable to model predictive control using exact 2–3-hour-ahead wind power forecasts.
基金supported by the Natural Science Foundation of China No.62303126the project Major Scientific and Technological Special Project of Guizhou Province([2024]014).
文摘This paper investigates the detection and mitigation of coordinated cyberattacks on Load Frequency Control(LFC)systems integrated with Battery Energy Storage Systems(BESS).As renewable energy sources gain greater penetration,power grids are becoming increasingly vulnerable to cyber threats,potentially leading to frequency instability and widespread disruptions.We model two significant attack vectors:load-altering attacks(LAAs)and false data injection attacks(FDIAs)that corrupt frequency measurements.These are analyzed for their impact on grid frequency stability in both linear and nonlinear LFC models,incorporating generation rate constraints and nonlinear loads.A coordinated attack strategy is presented,combining LAAs and FDIAs to achieve stealthiness by concealing frequency deviations from system operators,thereby maximizing disruption while evading traditional detection.To counteract these threats,we propose an Unknown Input Observer(UIO)-based detection framework for linear and nonlinear LFCs.The UIO is designed using linear matrix inequalities(LMIs)to estimate system states while isolating unknown attack inputs,enabling attack detection through monitoring measurement residuals against a predefined threshold.For mitigation,we leverage BESS capabilities with two adaptive strategies:dynamic mitigation for dynamic LAAs,which tunes BESS parameters to enhance the system’s stability margin and accelerate convergence to equilibrium;and staticmitigation for static LAAs and FDIAs.Simulations show that the UIO achieves high detection accuracy,with residuals exceeding thresholds promptly under coordinated attacks,even in nonlinear models.Mitigation strategies reduce frequency deviations by up to 80%compared to unmitigated cases,restoring stability within seconds.
基金extend their gratitude to the Deanship of Scientific Research,Vice Presidency for Graduate Studies and Scientific Research,King Faisal University,Saudi Arabia,for funding the publication of this work under the Ambitious Researcher program(Project No.KFU253806).
文摘Artificial intelligence(AI)based models have been used to predict the structural,optical,mechanical,and electrochemical properties of zinc oxide/graphene oxide nanocomposites.Machine learning(ML)models such as Artificial Neural Networks(ANN),Support Vector Regression(SVR),Multilayer Perceptron(MLP),and hybrid,along with fuzzy logic tools,were applied to predict the different properties like wavelength at maximum intensity(444 nm),crystallite size(17.50 nm),and optical bandgap(2.85 eV).While some other properties,such as energy density,power density,and charge transfer resistance,were also predicted with the help of datasets of 1000(80:20).In general,the energy parameters were predicted more accurately by hybrid models.The hydrothermal method was used to synthesize graphene oxide(GO)and zinc oxide(ZnO)nanocomposites.The increased surface area,conductivity,and stability of graphene oxide in zinc oxide nanoparticles make the composite an ideal option for energy storage.X-ray diffraction(XRD)confirmed the crystallite size of 17.41 nm for the nanocomposite and the presence of GO(12.8○)peaks.The scanning electron microscope(SEM)showed anchored wrinkled GO sheets on zinc oxide with an average particle size of 2.93μm.Energy-dispersive X-ray spectroscopy(EDX)confirmed the elemental composition,and Fouriertransform infrared spectroscopy(FTIR)revealed the impact of GO on functional groups and electrochemical behavior.Photoluminescence(PL)wavelength of(439 nm)and band gap of(2.81 eV)show that the material is suitable for energy applications in nanocomposites.Smart nanocomposite materials with improved performance in energy storage and related applications were fabricated by combining synthesis,characterization,fuzzy logic,and machine learning in this work.
基金funded by State Grid Corporation of China Central Branch Technology Project(52140024000C).
文摘In wind power transmission via modular multilevel converter based high voltage direct current(MMCHVDC)systems,under traditional control strategies,MMC-HVDCcannot provide inertia support to the receiving-end grid(REG)during disturbances.Moreover,due to the frequency decoupling between the two ends of the MMCHVDC,the sending-end wind farm(SEWF)cannot obtain the frequency variation information of the REG to provide inertia response.Therefore,this paper proposes a novel coordinated source-network-storage inertia control strategy based on wind power transmission via MMC-HVDC system.First,the grid-side MMC station(GS-MMC)maps the frequency variations of the REG to direct current(DC)voltage variations through the frequency mapping control,and uses submodule capacitor energy to provide inertial power.Then,the wind farm-side MMC station(WF-MMC)restores the DC voltage variations to frequency variations through the frequency restoration control and power loss compensation,providing real-time frequency information for the wind farm.Finally,based on real-time frequency information,thewind farmutilizes the rotor kinetic energy and energy storage to provide fast and lasting power support through the wind-storage coordinated inertia control strategy.Meanwhile,when the wind turbines withdraw from the inertia response phase,the energy storage can increase the power output to compensate for the power deficit,preventing secondary frequency drops.Furthermore,this paper uses small-signal analysis to determine the appropriate values for the key parameters of the proposed control strategy.A simulation model of the wind power transmission via MMCHVDC system is built in MATLAB/Simulink environment to validate and evaluate the proposed method.The results show that the proposed coordinated control strategy can effectively improve the system inertia level and avoid the secondary frequency drop under the load sudden increase condition.
基金funded by the Institute of Smart Energy,Huaiyin Institute of Technology,under Grant No.HIT-ISE-2024-07.
文摘In order to address environmental pollution and resource depletion caused by traditional power generation,this paper proposes an adaptive iterative dynamic-balance optimization algorithm that integrates the Improved Dung Beetle Optimizer(IDBO)with VariationalMode Decomposition(VMD).The IDBO-VMD method is designed to enhance the accuracy and efficiency of wind-speed time-series decomposition and to effectively smooth photovoltaic power fluctuations.This study innovatively improves the traditional variational mode decomposition(VMD)algorithm,and significantly improves the accuracy and adaptive ability of signal decomposition by IDBO selfoptimization of key parameters K and a.On this basis,Fourier transform technology is used to define the boundary point between high frequency and low frequency signals,and a targeted energy distribution strategy is proposed:high frequency fluctuations are allocated to supercapacitors to quickly respond to transient power fluctuations;Lowfrequency components are distributed to lead-carbon batteries,optimizing long-term energy storage and scheduling efficiency.This strategy effectively improves the response speed and stability of the energy storage system.The experimental results demonstrate that the IDBO-VMD algorithm markedly outperforms traditional methods in both decomposition accuracy and computational efficiency.Specifically,it effectively reduces the charge–discharge frequency of the battery,prolongs battery life,and optimizes the operating ranges of the state-of-charge(SOC)for both leadcarbon batteries and supercapacitors.In addition,the energy management strategy based on the algorithm not only improves the overall energy utilization efficiency of the system,but also shows excellent performance in the dynamic management and intelligent scheduling of renewable energy generation.
