Considering the environmental sustainability,the ceramic substrate is preferred in conventional global navigation satellite system(GNSS)antennas.However,the high-density ceramic increases the antennas'mass,and ban...Considering the environmental sustainability,the ceramic substrate is preferred in conventional global navigation satellite system(GNSS)antennas.However,the high-density ceramic increases the antennas'mass,and bandwidth of the GNSS antenna is narrowed by the high permittivity of ceramic.To solve these issues,a compact,lightweight circularly polarized(CP),transmitting(Tx)and receiving(Rx)integrated antenna was proposed for the lightweight and wide-bandwidth GNSS communications antennas.A hollowing sandwich layer was used to balance the bandwidth and weight performance.By optimizing hollowed dimensions,a lightweight and wide bandwidth GNSS antenna could be achieved.Both Tx-Rx antennas were integrated into a printed circuit board(PCB),minimizing the satellite installation space.Simulations and measurements are conducted.The results show that the operating frequency band around 1.6 GHz(Tx)and around 1.5 GHz(Rx),with realized gains 3 dBi(Tx)and 2.5 dBi(Rx).The total mass of the proposed antenna is around 59 g within a compact space of 50 mm×50 mm×10 mm.The proposed CP GNSS antennas show excellent performance in size,mass,and bandwidth,which can be a potential solution for the micro-nano satellite-ground communications.展开更多
A broadband microstrip patch antenna was analyzed and designed.Full wave analysis method(FWAM) was employed to show that a stacked microstrip dual patch antenna(SMDPA) might have a much wider bandwidth than that of ...A broadband microstrip patch antenna was analyzed and designed.Full wave analysis method(FWAM) was employed to show that a stacked microstrip dual patch antenna(SMDPA) might have a much wider bandwidth than that of the ordinanry uni patch one.By means of discrete complex image theory(DCIT),the Sommerfeld integrals (SI) involved were accurately calculated at a speed several hundred times faster than numerical integration method(NIM).The feeding structure of the SMDPA was then improved and the bandwidth was extended to about 22% or more for voltage standing wave ratio (VSWR)s≤2 Finally,a matching network was constructed to obtain a bandwidth of about 25% for s≤1.5.展开更多
The property of multi-band operation has been studied and investigated analytically through the design of a rectangular patch microstrip antenna having different numbers of wide slots arranged at both the radiating ed...The property of multi-band operation has been studied and investigated analytically through the design of a rectangular patch microstrip antenna having different numbers of wide slots arranged at both the radiating edges. The analyses were carried out using the method of moments simulation software. It is shown that a patch with three slots has a multi-band feature with four resonant frequencies at 1.6, 1.8, 2.65, and 4.83 GHz and adequate values of return loss and gain. It is also shown that a patch with two pairs of wide slots arranged at both the radiating edges has the dual band feature with resonant frequencies at 1.64 and 1.8 GHz and good values of return loss and gain.展开更多
A new photonic bandgap (PBG) cover for a patch antenna with a photonic bandgap substrate is introduced. The plane wave expansion method and the FDTD method were used to calculate such an antenna system. Numerical re-s...A new photonic bandgap (PBG) cover for a patch antenna with a photonic bandgap substrate is introduced. The plane wave expansion method and the FDTD method were used to calculate such an antenna system. Numerical re-sults for the input return loss, radiation pattern, surface wave, and the directivity of the antennas are presented. A com-parison between the conventional patch antenna and the new PBG antenna is given. It is shown that the new PBG cover is very efficient for improving the radiation directivity. The physical reasons for the improvement are also given.展开更多
In the past twenty years, electromagnetic metamaterials represented by left-handed metamaterials（LHMs） have attracted considerable attention due to the unique properties such as negative refraction, perfect lens, an...In the past twenty years, electromagnetic metamaterials represented by left-handed metamaterials（LHMs） have attracted considerable attention due to the unique properties such as negative refraction, perfect lens, and electromagnetic cloaks. In this paper, we present a comprehensive review of our group＇s work on metamaterials and metasurfaces. We present several types of LHMs and chiral metamaterials. As a two-dimensional equivalent of bulk three-dimensional metamaterials, metasurfaces have led to a myriad of devices due to the advantages of lower profile, lower losses, and simpler to fabricate than bulk three-dimensional metamaterials. We demonstrate the novel microwave metadevices based on metamaterials and metasurfaces： perfect absorbers and microwave patch antennas, including novel transmission line antennas,high gain resonant cavity antennas, wide scanning phased array antennas, and circularly polarized antennas.展开更多
Wireless interrogation of a rectangular microstrip patch antenna for strain measurement is investigated by simulations.To analyze the antenna performance,a microstrip line-feeding patch antenna at 10 GHz is designed.A...Wireless interrogation of a rectangular microstrip patch antenna for strain measurement is investigated by simulations.To analyze the antenna performance,a microstrip line-feeding patch antenna at 10 GHz is designed.A patch antenna wirelessly fed by a horn is proposed to measure the strain.The direction information of strain detected by the patch antenna is also considered.The strain can be detected both in the width and length directions.It is shown that the strain can be measured wirelessly using a standard horn antenna.This kind of wireless strain-sensing technique offers significant potential for wireless structural health monitoring(SHM),especially for high-end equipment.展开更多
A metamaterial was introduced into the cover of a patch antenna and its band structure was analyzed. The metama- terial cover with correct selection of the working frequency increases by 9.14 dB the patch antenna’s d...A metamaterial was introduced into the cover of a patch antenna and its band structure was analyzed. The metama- terial cover with correct selection of the working frequency increases by 9.14 dB the patch antenna’s directivity. The mechanism of metamaterial cover is completely different from that of a photonic bandgap cover. The mechanism of the metamaterial cover, the number of the cover’s layers, and the distance between the layers, were analyzed in detail. The results showed that the metamaterial cover, which works like a lens, could effectively improve the patch antenna’s directivity. The physical reasons for the improvement are also given.展开更多
A new patch antenna system with a metamaterial cover is presented in this paper. The impedance, radiation pattem, and directivity of such an antenna are studied. A performance comparison between the conventional patch...A new patch antenna system with a metamaterial cover is presented in this paper. The impedance, radiation pattem, and directivity of such an antenna are studied. A performance comparison between the conventional patch antenna and the new metamaterial patch antenna is given. The results show that the directivity of the metamaterial patch antenna is significantly improved. The effect of the metamaterial cover＇s layer numbers on the radiation pattern of the patch antenna is also studied.展开更多
A novel compact Swastika shaped patch antenna is designed in the present work,which can be used for Multiple Input Multiple Output(MIMO) systems.The proposed two element MIMO system resonates at a triband of 3.3 GHz,5...A novel compact Swastika shaped patch antenna is designed in the present work,which can be used for Multiple Input Multiple Output(MIMO) systems.The proposed two element MIMO system resonates at a triband of 3.3 GHz,5.8 GHz,and 7.1 GHz with an improved impedance bandwidth of 37% and a reduced mutual coupling of-33 dB.These results are better compared to a normal E shaped patch antenna designed with same size and thickness,achieved without using any additional decoupling methods.A 2×2 MIMO system employing the Swastika shaped patch antennas is analyzed using computational electromagnetic ray tracing software for an indoor environment.The results show an improvement in the capacity compared to a 2×2 MIMO system developed with dipole antennas.The proposed antenna is a good choice for MIMO systems operating for several Ultra WideBand(UWB) applications.展开更多
The finite element modeling of three dimensional structures is important for researchers especially in the field of antennas and other domains of electromagnetic waves. This paper presents a finite element calculation...The finite element modeling of three dimensional structures is important for researchers especially in the field of antennas and other domains of electromagnetic waves. This paper presents a finite element calculations and numerical analysis for the microstrip patch antennas. In this paper, two different designs have been modelled and analyzed and both designs are based on the rectangular patches. The feeding point of one design is inside the patch while the other design contains feeding point outside the patch is T shaped. The computational analysis showed some interesting results for radiation pattern and far field domain. For these designs, the characteristic impedance taken is 50 Ω and the operating frequency domain is 1.4 to 1.7 GHz. The microstrip patch antennas are encapsulated in the inert spherical atmosphere of 20 mm thickness containing air inside it.展开更多
Different feeding techniques of microstrip patch antennas with different spiral defected ground structures are presented in this paper. The investigated structures illustrate some merits in designing multi-electromagn...Different feeding techniques of microstrip patch antennas with different spiral defected ground structures are presented in this paper. The investigated structures illustrate some merits in designing multi-electromagnetic band-gap structures by adjusting the capacitance and changing the inductance through varying the width and length of spiral defected ground structure. Then by applying the three different spirals shapes (one, two and four arms) as the ground plane of microstrip patch antenna with different feeding techniques to create multi or ultra wide-band, improve the antenna gain and reduce the antenna size, it is found that the four arms spiral defected ground structure of microstrip patch antenna with offset feed gives good performance, electrical size reduction to about 75% as compared to the original patch size and ultra-wide bandwidth extends from 2 GHz up to 12 GHz with ?8 dB impedance bandwidth.展开更多
This paper presents the design of a fully packaged 60 GHz wideband patch antenna incorporating an air cavity and a fused silica superstrate. Circular polarization (CP) is realized by introducing a diagonal slot at the...This paper presents the design of a fully packaged 60 GHz wideband patch antenna incorporating an air cavity and a fused silica superstrate. Circular polarization (CP) is realized by introducing a diagonal slot at the center of the square patch. By optimizing the patch and the slot dimensions, a high efficiency (>90%) microstrip fed CP antenna with an impedance bandwidth of 24% and a 6 dB axial ratio bandwidth of 21.5% is designed. A coplanar waveguide (CPW) to microstrip transition with λ/4-open-ended stubs are then designed to match the antenna to the CPW packaging interface. The experimental results of the final packaged antenna agree reasonably with the simulation results, demonstrating an impedance bandwidth of more than 26% and a 6 dB axial ratio bandwidth of 22.7%.展开更多
The finite element method(FEM) is applied to a thin substrate rectangular antenna with a shorting post. The results of the resonant frequencies are in good agreement with the experimental data. The input impedances a...The finite element method(FEM) is applied to a thin substrate rectangular antenna with a shorting post. The results of the resonant frequencies are in good agreement with the experimental data. The input impedances are calculated and the results are presented. In principle, this method is applicable to a microstrip antenna with shorting posts in arbitrary locations.展开更多
A ceramic dielectric resonator antenna excited by a corner-cut square patch for the circularly-polarized operation is introduced. The effect of patch size and cut size is investigated, showing that the resonant freque...A ceramic dielectric resonator antenna excited by a corner-cut square patch for the circularly-polarized operation is introduced. The effect of patch size and cut size is investigated, showing that the resonant frequency of the antenna can be changed by simply changing the patch size. The reflection, axial ratio, and radiation characteristics of the antenna are found. Measurements were carried out to verify the design. The antenna is compact in structure, which is attractive in the application as the satellite communication terminals.展开更多
Wave Iterative Method (WIM) is a numerical modeling for electromagnetic field analysis of microwave circuits. Theories of transmission line, four terminal network and boundary condition are applied to developing WIM s...Wave Iterative Method (WIM) is a numerical modeling for electromagnetic field analysis of microwave circuits. Theories of transmission line, four terminal network and boundary condition are applied to developing WIM simulation that the physical electromagnetic wave is described to a mathematical model using GUI function of MATLAB. In applying, the microstrip patch antenna was analyzed and implemented. The research result shows that the WIM simulation can be used correctly to analyze the electric field, magnetic field theory and return lose of sample patch antenna. The comparison of the WIM calculation agrees well with the measurement and the classical simulation.展开更多
The design of a seven-band stacked patch antenna for the C, X and Ku band is presented. The antenna consists of an H-slot loaded fed patch, stacked with dual U-slot loaded rectangular patch to generate the seven frequ...The design of a seven-band stacked patch antenna for the C, X and Ku band is presented. The antenna consists of an H-slot loaded fed patch, stacked with dual U-slot loaded rectangular patch to generate the seven frequency bands. The total size of the antenna is 39.25 × 29.25 mm2. The multiband stacked patch antenna is studied and designed using IE3D simulator. For verification of simulation results, the antenna is analyzed by circuit theory concept. The simulated return loss, radiation pattern and gain are presented. Simulated results show that the antenna can be designed to cover the frequency bands from (4.24 GHz to 4.50 GHz, 5.02 GHz to 5.25 GHz) in C-band application, (7.84 GHz to 8.23 GHz) in X-band and (12.16 GHz to 12.35 GHz, 14.25 GHz to 14.76 GHz, 15.25 GHz to 15.51 GHz, 17.52 GHz to 17.86 GHz) in Ku band applications. The bandwidths of each band of the proposed antenna are 5.9%, 4.5%, 4.83%, 2.36%, 3.53%, 1.68% and 1.91%. Similarly the gains of the proposed band are 2.80 dBi, 4.39 dBi, 4.54 dBi, 10.26 dBi, 8.36 dBi and 9.91 dBi, respectively.展开更多
A patch antenna and our proposed metamaterial patch antenna are simulated and compared. A high gain patch antenna using a single layer metamaterial superstrate with a near to zero refractive index(n)is proposed.The si...A patch antenna and our proposed metamaterial patch antenna are simulated and compared. A high gain patch antenna using a single layer metamaterial superstrate with a near to zero refractive index(n)is proposed.The simulation results provide that the gain of the proposed antenna is increased by about 7dB. Consequently,the high gain antenna can be easily obtained by using our metamaterial superstrate.展开更多
This paper describes the multiband behaviour as well as the response for dielectric loading of a pentagonal fractal patch antenna designed at frequency f = 2.45 GHz. The proposed antenna shape has been obtained by int...This paper describes the multiband behaviour as well as the response for dielectric loading of a pentagonal fractal patch antenna designed at frequency f = 2.45 GHz. The proposed antenna shape has been obtained by introducing slots in a pentagonal patch antenna up to second iteration. Detailed design steps and results of the designs are studied and investigated in this paper. Simulated and measured results reveal that the antenna will be operated at three different frequency bands—2.17 GHz, 3.56 GHz, and 7.93 GHz with acceptable performances (i.e. VSWR < 2). The measured results for the antennas are in good agreement with simulated results. The proposed antenna maintains good radiation pattern with gain. However dielectric loading increases its radiation efficiency at the cost of significant decrease in gain and directivity.展开更多
In this paper, a dual-band microstrip patch array antenna for both the Multiple Input Multiple Output (MIMO) 4G Long-Term Evolution (LTE) and the Wireless Local Area Network (WLAN) systems is developed. Design simulat...In this paper, a dual-band microstrip patch array antenna for both the Multiple Input Multiple Output (MIMO) 4G Long-Term Evolution (LTE) and the Wireless Local Area Network (WLAN) systems is developed. Design simulation and optimization processes are carried out with the aid of the Advanced Design System (ADS) electromagnetic simula-tor that uses the full–wave Method of Moment (MoM) numerical technique [1]. Rectangular microstrip patch antenna constructed from Multi-Walled Carbon Nanotubes (MWCNT) ink with electrical conductivity of 2.2 × 104 S/m and relative permittivity of 5-j1 is used as the conductor patch [2]. The patch is deposited on Rogers substrate RT-Durid 5880 single substrate with (εr = 2.2) and thickness of 62 mil. U-shape slot is used to provide the dual-band. The pro-posed antenna operates at 3.5 GHz for LTE and 5 GHz for WLAN. The proposed antenna parameters are compared with published result of copper patch [3,4] for the same application. Great enhancement in antenna size, matching, and frequency band width are achieved for the proposed antenna at the expense of gain and antenna efficiency compared with copper one. The proposed MWCNT dielectric antenna size is 18.4 mm × 27 mm compared with size of 27 mm × 37 mm for copper one respectively. The gain is better than 7dBi with antenna efficiency of 87.29% at 3.5GHz for cop-per patch antenna and is better than 1.692 dBi with antenna efficiency of 27.05% at 3.5GHz for MWCNT respectively.展开更多
A novel multi-band end-fire antenna array was designed, fabricated, and characterized. Analytical calculations were carried out to determine the critical antenna dimensions and the design was optimized using a 3D elec...A novel multi-band end-fire antenna array was designed, fabricated, and characterized. Analytical calculations were carried out to determine the critical antenna dimensions and the design was optimized using a 3D electromagnetic finite-element solver. The measured results were in good agreement with the designed results. The proposed antenna array exhibits multi-band capabilities which can be potentially used for applications that require a multi-band end-fire radiation pattern.展开更多
基金funded by Basic Research Program of Jiangsu under grant BK20252030。
文摘Considering the environmental sustainability,the ceramic substrate is preferred in conventional global navigation satellite system(GNSS)antennas.However,the high-density ceramic increases the antennas'mass,and bandwidth of the GNSS antenna is narrowed by the high permittivity of ceramic.To solve these issues,a compact,lightweight circularly polarized(CP),transmitting(Tx)and receiving(Rx)integrated antenna was proposed for the lightweight and wide-bandwidth GNSS communications antennas.A hollowing sandwich layer was used to balance the bandwidth and weight performance.By optimizing hollowed dimensions,a lightweight and wide bandwidth GNSS antenna could be achieved.Both Tx-Rx antennas were integrated into a printed circuit board(PCB),minimizing the satellite installation space.Simulations and measurements are conducted.The results show that the operating frequency band around 1.6 GHz(Tx)and around 1.5 GHz(Rx),with realized gains 3 dBi(Tx)and 2.5 dBi(Rx).The total mass of the proposed antenna is around 59 g within a compact space of 50 mm×50 mm×10 mm.The proposed CP GNSS antennas show excellent performance in size,mass,and bandwidth,which can be a potential solution for the micro-nano satellite-ground communications.
文摘A broadband microstrip patch antenna was analyzed and designed.Full wave analysis method(FWAM) was employed to show that a stacked microstrip dual patch antenna(SMDPA) might have a much wider bandwidth than that of the ordinanry uni patch one.By means of discrete complex image theory(DCIT),the Sommerfeld integrals (SI) involved were accurately calculated at a speed several hundred times faster than numerical integration method(NIM).The feeding structure of the SMDPA was then improved and the bandwidth was extended to about 22% or more for voltage standing wave ratio (VSWR)s≤2 Finally,a matching network was constructed to obtain a bandwidth of about 25% for s≤1.5.
文摘The property of multi-band operation has been studied and investigated analytically through the design of a rectangular patch microstrip antenna having different numbers of wide slots arranged at both the radiating edges. The analyses were carried out using the method of moments simulation software. It is shown that a patch with three slots has a multi-band feature with four resonant frequencies at 1.6, 1.8, 2.65, and 4.83 GHz and adequate values of return loss and gain. It is also shown that a patch with two pairs of wide slots arranged at both the radiating edges has the dual band feature with resonant frequencies at 1.64 and 1.8 GHz and good values of return loss and gain.
文摘A new photonic bandgap (PBG) cover for a patch antenna with a photonic bandgap substrate is introduced. The plane wave expansion method and the FDTD method were used to calculate such an antenna system. Numerical re-sults for the input return loss, radiation pattern, surface wave, and the directivity of the antennas are presented. A com-parison between the conventional patch antenna and the new PBG antenna is given. It is shown that the new PBG cover is very efficient for improving the radiation directivity. The physical reasons for the improvement are also given.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11674267,51272215,11874301,and 11204241)the National Basic Research Program of China(Grant No.2012CB921503)+2 种基金the National Aerospace Science Foundation of China(Grant No.2016ZF53061)the Fundamental Research Funds for the Central Universities,China(Grant No.3102017jghk02004)the Natural Science Basic Research Plan in Shaanxi Province of China(Grant No.2017JM1009)
文摘In the past twenty years, electromagnetic metamaterials represented by left-handed metamaterials（LHMs） have attracted considerable attention due to the unique properties such as negative refraction, perfect lens, and electromagnetic cloaks. In this paper, we present a comprehensive review of our group＇s work on metamaterials and metasurfaces. We present several types of LHMs and chiral metamaterials. As a two-dimensional equivalent of bulk three-dimensional metamaterials, metasurfaces have led to a myriad of devices due to the advantages of lower profile, lower losses, and simpler to fabricate than bulk three-dimensional metamaterials. We demonstrate the novel microwave metadevices based on metamaterials and metasurfaces： perfect absorbers and microwave patch antennas, including novel transmission line antennas,high gain resonant cavity antennas, wide scanning phased array antennas, and circularly polarized antennas.
基金supported by the National Natural Science Foundation of China (Nos. 51575015,51235001,51505013)
文摘Wireless interrogation of a rectangular microstrip patch antenna for strain measurement is investigated by simulations.To analyze the antenna performance,a microstrip line-feeding patch antenna at 10 GHz is designed.A patch antenna wirelessly fed by a horn is proposed to measure the strain.The direction information of strain detected by the patch antenna is also considered.The strain can be detected both in the width and length directions.It is shown that the strain can be measured wirelessly using a standard horn antenna.This kind of wireless strain-sensing technique offers significant potential for wireless structural health monitoring(SHM),especially for high-end equipment.
基金Project (No. 2004CB719802) supported by the National Basic Research Program (973) of China
文摘A metamaterial was introduced into the cover of a patch antenna and its band structure was analyzed. The metama- terial cover with correct selection of the working frequency increases by 9.14 dB the patch antenna’s directivity. The mechanism of metamaterial cover is completely different from that of a photonic bandgap cover. The mechanism of the metamaterial cover, the number of the cover’s layers, and the distance between the layers, were analyzed in detail. The results showed that the metamaterial cover, which works like a lens, could effectively improve the patch antenna’s directivity. The physical reasons for the improvement are also given.
基金Project (No. Y105543) supported by the Natural Science Founda-tion of Zhejiang Province, China
文摘A new patch antenna system with a metamaterial cover is presented in this paper. The impedance, radiation pattem, and directivity of such an antenna are studied. A performance comparison between the conventional patch antenna and the new metamaterial patch antenna is given. The results show that the directivity of the metamaterial patch antenna is significantly improved. The effect of the metamaterial cover＇s layer numbers on the radiation pattern of the patch antenna is also studied.
文摘A novel compact Swastika shaped patch antenna is designed in the present work,which can be used for Multiple Input Multiple Output(MIMO) systems.The proposed two element MIMO system resonates at a triband of 3.3 GHz,5.8 GHz,and 7.1 GHz with an improved impedance bandwidth of 37% and a reduced mutual coupling of-33 dB.These results are better compared to a normal E shaped patch antenna designed with same size and thickness,achieved without using any additional decoupling methods.A 2×2 MIMO system employing the Swastika shaped patch antennas is analyzed using computational electromagnetic ray tracing software for an indoor environment.The results show an improvement in the capacity compared to a 2×2 MIMO system developed with dipole antennas.The proposed antenna is a good choice for MIMO systems operating for several Ultra WideBand(UWB) applications.
文摘The finite element modeling of three dimensional structures is important for researchers especially in the field of antennas and other domains of electromagnetic waves. This paper presents a finite element calculations and numerical analysis for the microstrip patch antennas. In this paper, two different designs have been modelled and analyzed and both designs are based on the rectangular patches. The feeding point of one design is inside the patch while the other design contains feeding point outside the patch is T shaped. The computational analysis showed some interesting results for radiation pattern and far field domain. For these designs, the characteristic impedance taken is 50 Ω and the operating frequency domain is 1.4 to 1.7 GHz. The microstrip patch antennas are encapsulated in the inert spherical atmosphere of 20 mm thickness containing air inside it.
文摘Different feeding techniques of microstrip patch antennas with different spiral defected ground structures are presented in this paper. The investigated structures illustrate some merits in designing multi-electromagnetic band-gap structures by adjusting the capacitance and changing the inductance through varying the width and length of spiral defected ground structure. Then by applying the three different spirals shapes (one, two and four arms) as the ground plane of microstrip patch antenna with different feeding techniques to create multi or ultra wide-band, improve the antenna gain and reduce the antenna size, it is found that the four arms spiral defected ground structure of microstrip patch antenna with offset feed gives good performance, electrical size reduction to about 75% as compared to the original patch size and ultra-wide bandwidth extends from 2 GHz up to 12 GHz with ?8 dB impedance bandwidth.
文摘This paper presents the design of a fully packaged 60 GHz wideband patch antenna incorporating an air cavity and a fused silica superstrate. Circular polarization (CP) is realized by introducing a diagonal slot at the center of the square patch. By optimizing the patch and the slot dimensions, a high efficiency (>90%) microstrip fed CP antenna with an impedance bandwidth of 24% and a 6 dB axial ratio bandwidth of 21.5% is designed. A coplanar waveguide (CPW) to microstrip transition with λ/4-open-ended stubs are then designed to match the antenna to the CPW packaging interface. The experimental results of the final packaged antenna agree reasonably with the simulation results, demonstrating an impedance bandwidth of more than 26% and a 6 dB axial ratio bandwidth of 22.7%.
文摘The finite element method(FEM) is applied to a thin substrate rectangular antenna with a shorting post. The results of the resonant frequencies are in good agreement with the experimental data. The input impedances are calculated and the results are presented. In principle, this method is applicable to a microstrip antenna with shorting posts in arbitrary locations.
基金Project supported by the National High-Technology Research and Development Project of China (Grant No.2007AA12Z125)the Innovation Foundation of Shanghai University (Grant No.SHUCX092130)
文摘A ceramic dielectric resonator antenna excited by a corner-cut square patch for the circularly-polarized operation is introduced. The effect of patch size and cut size is investigated, showing that the resonant frequency of the antenna can be changed by simply changing the patch size. The reflection, axial ratio, and radiation characteristics of the antenna are found. Measurements were carried out to verify the design. The antenna is compact in structure, which is attractive in the application as the satellite communication terminals.
文摘Wave Iterative Method (WIM) is a numerical modeling for electromagnetic field analysis of microwave circuits. Theories of transmission line, four terminal network and boundary condition are applied to developing WIM simulation that the physical electromagnetic wave is described to a mathematical model using GUI function of MATLAB. In applying, the microstrip patch antenna was analyzed and implemented. The research result shows that the WIM simulation can be used correctly to analyze the electric field, magnetic field theory and return lose of sample patch antenna. The comparison of the WIM calculation agrees well with the measurement and the classical simulation.
文摘The design of a seven-band stacked patch antenna for the C, X and Ku band is presented. The antenna consists of an H-slot loaded fed patch, stacked with dual U-slot loaded rectangular patch to generate the seven frequency bands. The total size of the antenna is 39.25 × 29.25 mm2. The multiband stacked patch antenna is studied and designed using IE3D simulator. For verification of simulation results, the antenna is analyzed by circuit theory concept. The simulated return loss, radiation pattern and gain are presented. Simulated results show that the antenna can be designed to cover the frequency bands from (4.24 GHz to 4.50 GHz, 5.02 GHz to 5.25 GHz) in C-band application, (7.84 GHz to 8.23 GHz) in X-band and (12.16 GHz to 12.35 GHz, 14.25 GHz to 14.76 GHz, 15.25 GHz to 15.51 GHz, 17.52 GHz to 17.86 GHz) in Ku band applications. The bandwidths of each band of the proposed antenna are 5.9%, 4.5%, 4.83%, 2.36%, 3.53%, 1.68% and 1.91%. Similarly the gains of the proposed band are 2.80 dBi, 4.39 dBi, 4.54 dBi, 10.26 dBi, 8.36 dBi and 9.91 dBi, respectively.
基金supported by the IT R&D program of MKE/IITA.2009-F-033-02,Study of technologies for improving the RF spectrum characteristics by using the meta-electromagnetic structure.
文摘A patch antenna and our proposed metamaterial patch antenna are simulated and compared. A high gain patch antenna using a single layer metamaterial superstrate with a near to zero refractive index(n)is proposed.The simulation results provide that the gain of the proposed antenna is increased by about 7dB. Consequently,the high gain antenna can be easily obtained by using our metamaterial superstrate.
文摘This paper describes the multiband behaviour as well as the response for dielectric loading of a pentagonal fractal patch antenna designed at frequency f = 2.45 GHz. The proposed antenna shape has been obtained by introducing slots in a pentagonal patch antenna up to second iteration. Detailed design steps and results of the designs are studied and investigated in this paper. Simulated and measured results reveal that the antenna will be operated at three different frequency bands—2.17 GHz, 3.56 GHz, and 7.93 GHz with acceptable performances (i.e. VSWR < 2). The measured results for the antennas are in good agreement with simulated results. The proposed antenna maintains good radiation pattern with gain. However dielectric loading increases its radiation efficiency at the cost of significant decrease in gain and directivity.
文摘In this paper, a dual-band microstrip patch array antenna for both the Multiple Input Multiple Output (MIMO) 4G Long-Term Evolution (LTE) and the Wireless Local Area Network (WLAN) systems is developed. Design simulation and optimization processes are carried out with the aid of the Advanced Design System (ADS) electromagnetic simula-tor that uses the full–wave Method of Moment (MoM) numerical technique [1]. Rectangular microstrip patch antenna constructed from Multi-Walled Carbon Nanotubes (MWCNT) ink with electrical conductivity of 2.2 × 104 S/m and relative permittivity of 5-j1 is used as the conductor patch [2]. The patch is deposited on Rogers substrate RT-Durid 5880 single substrate with (εr = 2.2) and thickness of 62 mil. U-shape slot is used to provide the dual-band. The pro-posed antenna operates at 3.5 GHz for LTE and 5 GHz for WLAN. The proposed antenna parameters are compared with published result of copper patch [3,4] for the same application. Great enhancement in antenna size, matching, and frequency band width are achieved for the proposed antenna at the expense of gain and antenna efficiency compared with copper one. The proposed MWCNT dielectric antenna size is 18.4 mm × 27 mm compared with size of 27 mm × 37 mm for copper one respectively. The gain is better than 7dBi with antenna efficiency of 87.29% at 3.5GHz for cop-per patch antenna and is better than 1.692 dBi with antenna efficiency of 27.05% at 3.5GHz for MWCNT respectively.
文摘A novel multi-band end-fire antenna array was designed, fabricated, and characterized. Analytical calculations were carried out to determine the critical antenna dimensions and the design was optimized using a 3D electromagnetic finite-element solver. The measured results were in good agreement with the designed results. The proposed antenna array exhibits multi-band capabilities which can be potentially used for applications that require a multi-band end-fire radiation pattern.
