Under unbalanced source voltage supply, considerable output second harmonics and input low-order harmonics in 3-phase PWM current-source converters (PWM-CSC) are generated. This paper proposes a new deadbeat controlle...Under unbalanced source voltage supply, considerable output second harmonics and input low-order harmonics in 3-phase PWM current-source converters (PWM-CSC) are generated. This paper proposes a new deadbeat controller based on compensation for unbalanced source voltage and current. With the proposed scheme, the second harmonics of the output current are eliminated and low-order harmonics of the source current are reduced effectively. Simulation and experimental results con- firmed the feasibility of the proposed method.展开更多
This paper proposes a family of PWM modulation strategies for boostfull-bridge (FB) converters. The modulation strategies can be classified into two kinds according tothe turn-on sequence of the diagonal switches. The...This paper proposes a family of PWM modulation strategies for boostfull-bridge (FB) converters. The modulation strategies can be classified into two kinds according tothe turn-on sequence of the diagonal switches. The concept of leading switches and lagging switchesis introduced to realize soft-switching. According to the soft-switching realized by the leadingswitches and the lagging switches, two kinds of soft-switching techniques for PWM boost FBconverters yield: zero-current-switching (ZCS) and zero-current and zero-voltage-switching (ZCZVS).Simulation results verify the analysis.展开更多
To minimize the reactive power of the converter of the control winding in the novel dual stator-winding induction generator based on the PWM converter, design features of the induction generator with a rectified load ...To minimize the reactive power of the converter of the control winding in the novel dual stator-winding induction generator based on the PWM converter, design features of the induction generator with a rectified load are proposed. The optimization method of excited capacitors to minimize the reactive power of the control winding at a variable speed is given. The calculation capacity of the machine with a diode bridge rectifier load is proposed. To achieve global searching, the integrated method with the improved real-coded genetic algorithm and the twodimensional finite element method （FEM） is introduced. Design results of the sample show that reactive power can be reduced by the method, and the converter capacity can be decreased to 1/3 of output rated power at the speed ratio of 1 ： 3, thus reducing the volume and the mass of the inverter.展开更多
A new PWM converter based on soft switching is introduced. The converter uses a minimum number of devices, and requires less switching operations than conventional techniques. Switching is realized solely in a ZVS (z...A new PWM converter based on soft switching is introduced. The converter uses a minimum number of devices, and requires less switching operations than conventional techniques. Switching is realized solely in a ZVS (zero voltage switching) mode, therefore the loss is reduced and EMI (electromagnetic interference) is suppressed. The paper analyzes the operation of ZVS, and discusses the methods for maintaining a unit power factor and constant DC voltage. Changing the modulation index M and the phase angle θ keeps the input current in phase with the voltage. It also keeps the current sinusoidal, and ensures a constant output voltage.展开更多
This technical paper takes a study into efficiency comparison between PWM and PFM control modes in DC-DC buck converters. Matlab Simulink Models are built to facilitate the analysis of various effects on power loss an...This technical paper takes a study into efficiency comparison between PWM and PFM control modes in DC-DC buck converters. Matlab Simulink Models are built to facilitate the analysis of various effects on power loss and converting efficiency, including different load conditions, gate switching frequency, setting of voltage and current thresholds, etc. From efficiency vs. load graph, a best switching frequency is found to achieve a good efficiency throughout the wide load range. This simulation point is then compared to theoretical predictions, justifying the effectiveness of computer based simulation. Efficiencies at two different control modes are compared to verify the improvement of PFM scheme.展开更多
This paper presents a chaotic PWM switching technique for a high boost DC-DC converter with a very low ripple at the input current.The use of a choatic PWM allows a reduction of Electromagnetic In(EMI)at the output of...This paper presents a chaotic PWM switching technique for a high boost DC-DC converter with a very low ripple at the input current.The use of a choatic PWM allows a reduction of Electromagnetic In(EMI)at the output of power converters by spreading the energy spectrum of the output voltage.In this paper a chaotic PWM,using the Chua oscillator,has been implemented in Matlab for the converter under study and a comparison with a traditional PWM control has been done.A detailed description of the generation of the chaotic carrier is presented and the effect on the output EMI mitigation has been shown.展开更多
In comparison with several zero-voltage transition （ZVT） inverter topologies, a double-PWM converter is presented using a simple ZVT topology. The rectifier and inverter of this double-PWM share a set of commutation...In comparison with several zero-voltage transition （ZVT） inverter topologies, a double-PWM converter is presented using a simple ZVT topology. The rectifier and inverter of this double-PWM share a set of commutation circuit which can provide soft-switching for the power devices and the diodes. The commutation circuit consists of 1 auxiliary device, 6 resonant inductors, and 12 diodes. Its topology is simpler than the conventional auxiliary resonant converter, leading to low loss and easy control. The control strategy and resonant working modes are analyzed. Experimental results show good performance of the system.展开更多
This text has expounded the working principle of realizing A/D conversion that utilizes the timer within MCU and combinesthe technology of PWM. The design of hardware circuit, improved gradual approached trial arithme...This text has expounded the working principle of realizing A/D conversion that utilizes the timer within MCU and combinesthe technology of PWM. The design of hardware circuit, improved gradual approached trial arithmetic and relevant program design arediscussed in detail. And it has analyzed the resolution of A/D converter based on the technology of PWM, etc.展开更多
The conventional inverters have the shortcomings of straightway conduction in transistors and the difficulty of realizing soft swit￣ching. A novel inverter based on the DC/DC converter topology is presented. The inve...The conventional inverters have the shortcomings of straightway conduction in transistors and the difficulty of realizing soft swit￣ching. A novel inverter based on the DC/DC converter topology is presented. The inverter is comprised of a combined Buck/Boost DC/DC converter and a bridge circuit. The front stage converter is controlled to output variable DC voltage and the bridge circuit is used to convert the DC voltage to AC output. The energy feedback technology and one circle control scheme are used t...展开更多
The new three-phase 5-level current-source inverter (CSI) proposed in this paper was developed by connecting three separate single-phase 5-level CSIs in series, and its operational principle was analyzed. There are tw...The new three-phase 5-level current-source inverter (CSI) proposed in this paper was developed by connecting three separate single-phase 5-level CSIs in series, and its operational principle was analyzed. There are two major problems existing in current-source multilevel inverters, one is the complex PWM control method (2-logic to 3-logic conversion), and the other is the problem of current-unbalance between different levels. A simple current-balance control method via DC current feedback is applied in each single-phase 5-level CSI cell to implement the current-balance control between different levels. And to reduce the output current harmonics, POD PWM control technique was used. Simulation and experimental results showed that this new three-phase 5-level CSI topology operates correctly.展开更多
A novel topology of the current-source grid-connected inverter is proposed based on the immittance converter theory. A control strategy of sine-sine pulse width modulation （PWM） is studied. Compared with the traditi...A novel topology of the current-source grid-connected inverter is proposed based on the immittance converter theory. A control strategy of sine-sine pulse width modulation （PWM） is studied. Compared with the traditional current-source inverter, the power frequency inductors and power frequency transformer are replaced with high frequency inductors and a high frequency transformer. Thus, the proposed inverter has advantages of small volume, low cost, low total harmonic distortion （THD）, low power losses, high power factor （PF） and simple control. Furthermore, grid voltage cannot influence output current of the grid-connected inverter and the current-source inverter with a high PF that approaches one has been realized. Finally, validity of the theory analysis and feasibility of the control scheme are shown by simulation and experimental results.展开更多
This paper we proposed advanced burst mode control technique to reduce the standby power consumption of the switch mode power supply (SMPS). To reduce the standby power consumption, most of the converter use burst mod...This paper we proposed advanced burst mode control technique to reduce the standby power consumption of the switch mode power supply (SMPS). To reduce the standby power consumption, most of the converter use burst mode or skip mode control technique. However Conventional standby mode control techniques have some problems such as audible noise and poor regulation. In proposed techniques, basically, the burst mode control technique is employed to reduce the fundamental switching frequency while limiting the peak drain current. But, in proposed technique, to improve the regulation characteristic, burst period of the proposed technique is shorter than that of the conventional burst mode technique. And also, to reduce the switching loss increase due to the short burst period, burst switching signal of the proposed technique is partially skipped. By using proposed advanced burst mode control technique, calculated standby power is 0.695W while standby power of the conventional burst mode control is 1.014W.展开更多
This paper proposes the modeling and simulation technique to analyze and design a Boost converter using generalized minimum variance method with discrete-time quasi-sliding mode to adjust the converter switch through ...This paper proposes the modeling and simulation technique to analyze and design a Boost converter using generalized minimum variance method with discrete-time quasi-sliding mode to adjust the converter switch through a pulse width modulation (PWM), so as to enhance a stable output voltage. The control objective is to maintain the sensed output voltage stable, constant and equal to some constant reference voltage (8 volt) in the load resistance variation (24, 48, 240) Ω and input voltage variation (20, 24, 28) volt circumstances. This control strategy is very appropriate for the digitally controlled power converter and for the system requirement accomplishment, resulting high output voltage accuracy. The performance degradation in practical implementation can be expected due to noise, PWM nonlinearities, and components imperfection. The digital simulation using MATHLAB/Simulink is performed to validate the functionality of the system.展开更多
This paper presents a novel dual-mode step-up （boost） DC/DC converter. Pulse-frequency modulation （PFM） is used to improve the efficiency at light load. This converter can operate between pulse-width modulation （...This paper presents a novel dual-mode step-up （boost） DC/DC converter. Pulse-frequency modulation （PFM） is used to improve the efficiency at light load. This converter can operate between pulse-width modulation （PWM） and pulse-frequency modulation. The converter will operate in PFM mode at light load and in PWM mode at heavy load. The maximum conversion efficiency of this converter is 96%. The conversion efficiency is greatly improved when load current is below 100 mA. Additionally, a soft-start circuit and a variable-sawtooth frequency circuit are proposed in this paper. The former is used to avoid the large switching current at the start up of the converter and the latter is utilized to reduce the EMI of the converter.展开更多
This work proposes a 12 kW three-phase grid-connected single stage PWM DC-AC converter destined to process the energy provided by a photovoltaic array composed of 57 KC200GT PV modules with high power factor for any s...This work proposes a 12 kW three-phase grid-connected single stage PWM DC-AC converter destined to process the energy provided by a photovoltaic array composed of 57 KC200GT PV modules with high power factor for any solar radiation. The PWM inverter modeling and the control strategy, using dqO transformation, are proposed in order to also allow the system operation as an active power filter, capable to compensate harmonic components and react power generated by the non-linear loads connected to the mains grid. An input voltage clamping technique is proposed to impose the photovoltaic operation on the maximum power point. Simulation and experimental results are presented to validate the proposed methodology for grid connected photovoltaic generation system.展开更多
a Pole voltage waveforms (VA20 and VA40) for modulation index 0.4 (middle trace is A-phase voltage waveform) x-axis: 1 div.=10ms, y-axis: 1 div.= 100V b Normalized harmonic spectrum for pole voltage of Fig. 9a c A-pha...a Pole voltage waveforms (VA20 and VA40) for modulation index 0.4 (middle trace is A-phase voltage waveform) x-axis: 1 div.=10ms, y-axis: 1 div.= 100V b Normalized harmonic spectrum for pole voltage of Fig. 9a c A-phase current and phase voltage for modulation index 0.4 (reference space vector is in inner layer)展开更多
基金Project (No. 50477033) supported by the National Nature ScienceFoundation of China
文摘Under unbalanced source voltage supply, considerable output second harmonics and input low-order harmonics in 3-phase PWM current-source converters (PWM-CSC) are generated. This paper proposes a new deadbeat controller based on compensation for unbalanced source voltage and current. With the proposed scheme, the second harmonics of the output current are eliminated and low-order harmonics of the source current are reduced effectively. Simulation and experimental results con- firmed the feasibility of the proposed method.
文摘This paper proposes a family of PWM modulation strategies for boostfull-bridge (FB) converters. The modulation strategies can be classified into two kinds according tothe turn-on sequence of the diagonal switches. The concept of leading switches and lagging switchesis introduced to realize soft-switching. According to the soft-switching realized by the leadingswitches and the lagging switches, two kinds of soft-switching techniques for PWM boost FBconverters yield: zero-current-switching (ZCS) and zero-current and zero-voltage-switching (ZCZVS).Simulation results verify the analysis.
文摘To minimize the reactive power of the converter of the control winding in the novel dual stator-winding induction generator based on the PWM converter, design features of the induction generator with a rectified load are proposed. The optimization method of excited capacitors to minimize the reactive power of the control winding at a variable speed is given. The calculation capacity of the machine with a diode bridge rectifier load is proposed. To achieve global searching, the integrated method with the improved real-coded genetic algorithm and the twodimensional finite element method （FEM） is introduced. Design results of the sample show that reactive power can be reduced by the method, and the converter capacity can be decreased to 1/3 of output rated power at the speed ratio of 1 ： 3, thus reducing the volume and the mass of the inverter.
文摘A new PWM converter based on soft switching is introduced. The converter uses a minimum number of devices, and requires less switching operations than conventional techniques. Switching is realized solely in a ZVS (zero voltage switching) mode, therefore the loss is reduced and EMI (electromagnetic interference) is suppressed. The paper analyzes the operation of ZVS, and discusses the methods for maintaining a unit power factor and constant DC voltage. Changing the modulation index M and the phase angle θ keeps the input current in phase with the voltage. It also keeps the current sinusoidal, and ensures a constant output voltage.
文摘This technical paper takes a study into efficiency comparison between PWM and PFM control modes in DC-DC buck converters. Matlab Simulink Models are built to facilitate the analysis of various effects on power loss and converting efficiency, including different load conditions, gate switching frequency, setting of voltage and current thresholds, etc. From efficiency vs. load graph, a best switching frequency is found to achieve a good efficiency throughout the wide load range. This simulation point is then compared to theoretical predictions, justifying the effectiveness of computer based simulation. Efficiencies at two different control modes are compared to verify the improvement of PFM scheme.
文摘This paper presents a chaotic PWM switching technique for a high boost DC-DC converter with a very low ripple at the input current.The use of a choatic PWM allows a reduction of Electromagnetic In(EMI)at the output of power converters by spreading the energy spectrum of the output voltage.In this paper a chaotic PWM,using the Chua oscillator,has been implemented in Matlab for the converter under study and a comparison with a traditional PWM control has been done.A detailed description of the generation of the chaotic carrier is presented and the effect on the output EMI mitigation has been shown.
基金Project supported by the Shanghai Post Doctoral Scientific Research Project (Grant No.05R214122)the Shanghai Leading Academic Discipline Project (Grant No.T0103)
文摘In comparison with several zero-voltage transition （ZVT） inverter topologies, a double-PWM converter is presented using a simple ZVT topology. The rectifier and inverter of this double-PWM share a set of commutation circuit which can provide soft-switching for the power devices and the diodes. The commutation circuit consists of 1 auxiliary device, 6 resonant inductors, and 12 diodes. Its topology is simpler than the conventional auxiliary resonant converter, leading to low loss and easy control. The control strategy and resonant working modes are analyzed. Experimental results show good performance of the system.
文摘This text has expounded the working principle of realizing A/D conversion that utilizes the timer within MCU and combinesthe technology of PWM. The design of hardware circuit, improved gradual approached trial arithmetic and relevant program design arediscussed in detail. And it has analyzed the resolution of A/D converter based on the technology of PWM, etc.
文摘The conventional inverters have the shortcomings of straightway conduction in transistors and the difficulty of realizing soft swit￣ching. A novel inverter based on the DC/DC converter topology is presented. The inverter is comprised of a combined Buck/Boost DC/DC converter and a bridge circuit. The front stage converter is controlled to output variable DC voltage and the bridge circuit is used to convert the DC voltage to AC output. The energy feedback technology and one circle control scheme are used t...
基金Project (No. 50477033) supported by the National Natural Science Foundation of China
文摘The new three-phase 5-level current-source inverter (CSI) proposed in this paper was developed by connecting three separate single-phase 5-level CSIs in series, and its operational principle was analyzed. There are two major problems existing in current-source multilevel inverters, one is the complex PWM control method (2-logic to 3-logic conversion), and the other is the problem of current-unbalance between different levels. A simple current-balance control method via DC current feedback is applied in each single-phase 5-level CSI cell to implement the current-balance control between different levels. And to reduce the output current harmonics, POD PWM control technique was used. Simulation and experimental results showed that this new three-phase 5-level CSI topology operates correctly.
基金supported by the Shanghai Leading Academic Discipline Project (Grant No.T0103)
文摘A novel topology of the current-source grid-connected inverter is proposed based on the immittance converter theory. A control strategy of sine-sine pulse width modulation （PWM） is studied. Compared with the traditional current-source inverter, the power frequency inductors and power frequency transformer are replaced with high frequency inductors and a high frequency transformer. Thus, the proposed inverter has advantages of small volume, low cost, low total harmonic distortion （THD）, low power losses, high power factor （PF） and simple control. Furthermore, grid voltage cannot influence output current of the grid-connected inverter and the current-source inverter with a high PF that approaches one has been realized. Finally, validity of the theory analysis and feasibility of the control scheme are shown by simulation and experimental results.
文摘This paper we proposed advanced burst mode control technique to reduce the standby power consumption of the switch mode power supply (SMPS). To reduce the standby power consumption, most of the converter use burst mode or skip mode control technique. However Conventional standby mode control techniques have some problems such as audible noise and poor regulation. In proposed techniques, basically, the burst mode control technique is employed to reduce the fundamental switching frequency while limiting the peak drain current. But, in proposed technique, to improve the regulation characteristic, burst period of the proposed technique is shorter than that of the conventional burst mode technique. And also, to reduce the switching loss increase due to the short burst period, burst switching signal of the proposed technique is partially skipped. By using proposed advanced burst mode control technique, calculated standby power is 0.695W while standby power of the conventional burst mode control is 1.014W.
文摘This paper proposes the modeling and simulation technique to analyze and design a Boost converter using generalized minimum variance method with discrete-time quasi-sliding mode to adjust the converter switch through a pulse width modulation (PWM), so as to enhance a stable output voltage. The control objective is to maintain the sensed output voltage stable, constant and equal to some constant reference voltage (8 volt) in the load resistance variation (24, 48, 240) Ω and input voltage variation (20, 24, 28) volt circumstances. This control strategy is very appropriate for the digitally controlled power converter and for the system requirement accomplishment, resulting high output voltage accuracy. The performance degradation in practical implementation can be expected due to noise, PWM nonlinearities, and components imperfection. The digital simulation using MATHLAB/Simulink is performed to validate the functionality of the system.
基金the National Science Council of Taiwan, China, under Grant No. NSC 95-2221-E-305010.
文摘This paper presents a novel dual-mode step-up （boost） DC/DC converter. Pulse-frequency modulation （PFM） is used to improve the efficiency at light load. This converter can operate between pulse-width modulation （PWM） and pulse-frequency modulation. The converter will operate in PFM mode at light load and in PWM mode at heavy load. The maximum conversion efficiency of this converter is 96%. The conversion efficiency is greatly improved when load current is below 100 mA. Additionally, a soft-start circuit and a variable-sawtooth frequency circuit are proposed in this paper. The former is used to avoid the large switching current at the start up of the converter and the latter is utilized to reduce the EMI of the converter.
文摘This work proposes a 12 kW three-phase grid-connected single stage PWM DC-AC converter destined to process the energy provided by a photovoltaic array composed of 57 KC200GT PV modules with high power factor for any solar radiation. The PWM inverter modeling and the control strategy, using dqO transformation, are proposed in order to also allow the system operation as an active power filter, capable to compensate harmonic components and react power generated by the non-linear loads connected to the mains grid. An input voltage clamping technique is proposed to impose the photovoltaic operation on the maximum power point. Simulation and experimental results are presented to validate the proposed methodology for grid connected photovoltaic generation system.
文摘a Pole voltage waveforms (VA20 and VA40) for modulation index 0.4 (middle trace is A-phase voltage waveform) x-axis: 1 div.=10ms, y-axis: 1 div.= 100V b Normalized harmonic spectrum for pole voltage of Fig. 9a c A-phase current and phase voltage for modulation index 0.4 (reference space vector is in inner layer)
