The effects of alternating current imposition and/or alkaline earth elements on modification of the primary Mg2Si crystals in the hypereutectic Mg-Si alloy were investigated.An alternating current of 60 A with frequen...The effects of alternating current imposition and/or alkaline earth elements on modification of the primary Mg2Si crystals in the hypereutectic Mg-Si alloy were investigated.An alternating current of 60 A with frequency of 1 kHz was applied into the hypereutectic Mg-Si melt which was alloyed with alkaline earth elements or not in the fixed temperature range from 700 to 630℃. The results show that the primary Mg2Si crystals could be refined by imposing alternating current or adding alkaline elements. Compared with the samples treated by adding 0.4%Ca or 0.4%Sr,higher modification efficiency could be obtained for the samples treated by imposing alternating current.No further modification efficiency could be obtained for the samples treated by imposing alternating current combined with 0.4%Ca or 0.4%Sr addition.展开更多
In this paper, the finite element method using vector potential in applications to 2D nonlinear eddy current field is discussed. The authors use the equivalent magnetic energy method to deal with magnetization curve o...In this paper, the finite element method using vector potential in applications to 2D nonlinear eddy current field is discussed. The authors use the equivalent magnetic energy method to deal with magnetization curve of ferromagnetic material,and present the formulation of 2D nonlinear eddy current field.With this method the authors analyze the eddy current field in an induction ladle furnace and the force distribution in the charge (molten metal),and plot the corresponding curves.展开更多
The paper adopts finite element method to analyze the forward problem of low-frequency current fields in inhomogeneous media. Firstly, the direct solution of 2-D and 3-D scalar potential is given. Secondly, the techni...The paper adopts finite element method to analyze the forward problem of low-frequency current fields in inhomogeneous media. Firstly, the direct solution of 2-D and 3-D scalar potential is given. Secondly, the technique of covering finite elements for problems with movement has been presented; namely, when the place of testing point moved, the meshing data will be produced automatically to avoid re-meshing and distortion of the mesh. Thirdly the free and prescribed potential method is used to make the finite element coefficient matrices. Then this paper provides the result of a validity test obtained by simulating the laterolog-3 logging, compared with the numerical model-matching method. Finally, the MLL response is calculated.展开更多
The paper addresses the first eddy current benchmark problem proposed by the World Federation of Nondestructive Evaluation Centers (WFNDEC). The problem simulates the eddy current response to the presence of an axisym...The paper addresses the first eddy current benchmark problem proposed by the World Federation of Nondestructive Evaluation Centers (WFNDEC). The problem simulates the eddy current response to the presence of an axisymmetric circumferential defect in an Inconel-600 tube. All simulations employ the axisymmetric code of the electromagnetic field simulator Finite Element Method Magnetics. For three different frequencies of excitation, it is explained how the displacement of the detecting coil inside the tube leads to a variation in the impedance of the eddy current coil. Variations of the resistive and inductive components of the impedance with distance from the defect region are used to build the impedance trajectory for each frequency of analysis.展开更多
1. IntroductionA large number of networks for realizing first and second order transfer functions using a currentconveyor have been reported in the literature. Especially, the networks that can offer highinput impedan...1. IntroductionA large number of networks for realizing first and second order transfer functions using a currentconveyor have been reported in the literature. Especially, the networks that can offer highinput impedance attract attention, for high input impedance has the advantage that the networksmay be used in cascade without requiring impedance matching device. In the Higashimura and展开更多
The paper is mainly concerned with the penalty incurred in finite element analysis of the eddy-current loss problem in a fully established multi-filamentary superconducting wire. A finite element model with 4-node qua...The paper is mainly concerned with the penalty incurred in finite element analysis of the eddy-current loss problem in a fully established multi-filamentary superconducting wire. A finite element model with 4-node quadrilateral isoparametric elements is formulated for the present problem. Unlike the conventional vector potential scheme in use for electromagnetic field problem, the present work features a direct computational approach to eddy current loss. Simplicity and remarkable enhancement in computational accuracy can be obtained with the proposed method.展开更多
An initial-boundary value problem for shallow equation system consisting of water dynamics equations,silt transport equation, the equation of bottom topography change,and of some boundary and initial conditions is stu...An initial-boundary value problem for shallow equation system consisting of water dynamics equations,silt transport equation, the equation of bottom topography change,and of some boundary and initial conditions is studied, the existence of its generalized solution and semidiscrete mixed finite element(MFE) solution was discussed, and the error estimates of the semidiscrete MFE solution was derived.The error estimates are optimal.展开更多
合理优化磁极的阵列方式,能够显著提升涡流制动器(Eddy Current Brake,ECB)的制动性能。基于Halbach永磁阵列,提出了方型、U型、倒U型三种新型聚磁式涡流制动器,并采用有限元法对其制动特性进行了研究。首先,采用稳态法,获取制动力与速...合理优化磁极的阵列方式,能够显著提升涡流制动器(Eddy Current Brake,ECB)的制动性能。基于Halbach永磁阵列,提出了方型、U型、倒U型三种新型聚磁式涡流制动器,并采用有限元法对其制动特性进行了研究。首先,采用稳态法,获取制动力与速度关系曲线,将三种聚磁式涡流制动器与Halbach型涡流制动器的制动特性进行对比,分析了次级厚度和气隙厚度对四种涡流制动器制动特性的影响;其次,采用瞬态法,获取三种聚磁式涡流制动器的动态制动特性,分析了背铁厚度、负载和永磁单元数对其制动性能的影响。结果表明三种聚磁式涡流制动器的制动力均大于Halbach型制动器;在140 km/h初速度下,三者在有背铁时的制动力均可比无背铁时的提升20%以上,10 kg负载下均可在1.5 s以内完成制动;三者中,方型和倒U型的制动性能更优,建议永磁单元数为4。展开更多
基金Project supported by JSPS Asian Core Program "Construction of the World Center on Electromagnetic Processing of Materials"
文摘The effects of alternating current imposition and/or alkaline earth elements on modification of the primary Mg2Si crystals in the hypereutectic Mg-Si alloy were investigated.An alternating current of 60 A with frequency of 1 kHz was applied into the hypereutectic Mg-Si melt which was alloyed with alkaline earth elements or not in the fixed temperature range from 700 to 630℃. The results show that the primary Mg2Si crystals could be refined by imposing alternating current or adding alkaline elements. Compared with the samples treated by adding 0.4%Ca or 0.4%Sr,higher modification efficiency could be obtained for the samples treated by imposing alternating current.No further modification efficiency could be obtained for the samples treated by imposing alternating current combined with 0.4%Ca or 0.4%Sr addition.
文摘In this paper, the finite element method using vector potential in applications to 2D nonlinear eddy current field is discussed. The authors use the equivalent magnetic energy method to deal with magnetization curve of ferromagnetic material,and present the formulation of 2D nonlinear eddy current field.With this method the authors analyze the eddy current field in an induction ladle furnace and the force distribution in the charge (molten metal),and plot the corresponding curves.
基金Supported by the National Natural Science Foundation of China
文摘The paper adopts finite element method to analyze the forward problem of low-frequency current fields in inhomogeneous media. Firstly, the direct solution of 2-D and 3-D scalar potential is given. Secondly, the technique of covering finite elements for problems with movement has been presented; namely, when the place of testing point moved, the meshing data will be produced automatically to avoid re-meshing and distortion of the mesh. Thirdly the free and prescribed potential method is used to make the finite element coefficient matrices. Then this paper provides the result of a validity test obtained by simulating the laterolog-3 logging, compared with the numerical model-matching method. Finally, the MLL response is calculated.
文摘The paper addresses the first eddy current benchmark problem proposed by the World Federation of Nondestructive Evaluation Centers (WFNDEC). The problem simulates the eddy current response to the presence of an axisymmetric circumferential defect in an Inconel-600 tube. All simulations employ the axisymmetric code of the electromagnetic field simulator Finite Element Method Magnetics. For three different frequencies of excitation, it is explained how the displacement of the detecting coil inside the tube leads to a variation in the impedance of the eddy current coil. Variations of the resistive and inductive components of the impedance with distance from the defect region are used to build the impedance trajectory for each frequency of analysis.
文摘1. IntroductionA large number of networks for realizing first and second order transfer functions using a currentconveyor have been reported in the literature. Especially, the networks that can offer highinput impedance attract attention, for high input impedance has the advantage that the networksmay be used in cascade without requiring impedance matching device. In the Higashimura and
文摘The paper is mainly concerned with the penalty incurred in finite element analysis of the eddy-current loss problem in a fully established multi-filamentary superconducting wire. A finite element model with 4-node quadrilateral isoparametric elements is formulated for the present problem. Unlike the conventional vector potential scheme in use for electromagnetic field problem, the present work features a direct computational approach to eddy current loss. Simplicity and remarkable enhancement in computational accuracy can be obtained with the proposed method.
文摘An initial-boundary value problem for shallow equation system consisting of water dynamics equations,silt transport equation, the equation of bottom topography change,and of some boundary and initial conditions is studied, the existence of its generalized solution and semidiscrete mixed finite element(MFE) solution was discussed, and the error estimates of the semidiscrete MFE solution was derived.The error estimates are optimal.
