During the process of aircraft design, the mathematical model of pilot control behavior characteristics is always used to predict aircraft flying qualities （FQ）. This is one of the important methods to avoid pilot-a...During the process of aircraft design, the mathematical model of pilot control behavior characteristics is always used to predict aircraft flying qualities （FQ）. This is one of the important methods to avoid pilot-aircraft adverse coupling. In order to study the FQ criterion based on closed-loop pilot-aircraft systems, first, an experimental database is built, which includes 40 aircraft dynamics configurations and the corresponding flight simulation results. Second, the mathematical pilot models with a set of different aircraft configurations are obtained by this experimental database. Then, two FQ criteria, Neal-Smith criterion and Moscow Aviation Institute （MAI） criterion, are analyzed. And the relationship between the FQ level evaluated by actual pilot and the parameters of closed-loop pilot-aircraft systems is studied. Finally, an improved criterion of aircraft FQ is built based on the above two criteria. This new criterion is further used to predict FQ for four new aircraft dynamics configurations, and the prediction results verify its accuracy and practicability.展开更多
Several potential failure modes generally exist in rock slopes because of the existence of massive structural planes in rock masses. A system reliability analyses method for rock slopes with multiple failure modes bas...Several potential failure modes generally exist in rock slopes because of the existence of massive structural planes in rock masses. A system reliability analyses method for rock slopes with multiple failure modes based on nonlinear Barton-Bandis failure criterion is proposed. The factors of safety associated with the sliding and overturning failure modes are derived, respectively. The validity of this method is verified through a planar rock slope with an inclined slope top and tension crack. Several sensitivity analyses are adopted to study the influences of structural-plane parameters, geometric parameters, anchoring parameters and fracture morphology on the rock slopes system reliability.展开更多
Based on the nonlinear Barton–Bandis(B–B)failure criterion,this study considers the system reliability of rock wedge stability under the pseudo-static seismic load.The failure probability(Pf)of the system is calcula...Based on the nonlinear Barton–Bandis(B–B)failure criterion,this study considers the system reliability of rock wedge stability under the pseudo-static seismic load.The failure probability(Pf)of the system is calculated based on the Monte−Carlo method when considering parameter correlation and variability.Parameter analysis and sensitivity analysis are carried out to explore the influence of parameters on reliability.The relationships among the failure probability,safety factor(Fs),and variation coefficient are explored,and then stability probability curves of the rock wedge under the pseudo-static seismic load are drawn.The results show that the parameter correlation of the B–B failure criterion has a significant influence on the failure probability,but correlation increases system reliability or decreases system reliability affected by other parameters.Under the pseudo-static seismic action,sliding on both planes is the main failure mode of wedge system.In addition,the parameters with relatively high sensitivity are two angles related to the joint dip.When the coefficient of variation is consistent,the probability of system failure is a function of the safety factor.展开更多
In this correspondence paper, an equivalent stability criterion with minimal number of linear matrix inequality （LMI） variables is presented for a delay-dependent stability criterion reported recently in the Interna...In this correspondence paper, an equivalent stability criterion with minimal number of linear matrix inequality （LMI） variables is presented for a delay-dependent stability criterion reported recently in the International Journal of Automation and Computing for a class of linear discrete-time systems with additive time delays. The reported stability criterion for the additive timedelay systems has more number of matrix variables in the LMI and, hence, demand additional computational burden. The proposed equivalent stability criterion, unlike the reported one, does not involve free-weighing matrices and encompass only the matrix variables that are associated in the Lyapunov-Krasovskii functional, making the criterion mathematically less complex and computationally more effective.展开更多
A mechanical model is proposed for the system of elastic beam and strain-softening pillar where strain localization is initiated at peak shear stress. To obtain the plastic deformation of the pillar due to the shear s...A mechanical model is proposed for the system of elastic beam and strain-softening pillar where strain localization is initiated at peak shear stress. To obtain the plastic deformation of the pillar due to the shear slips of multiple shear bands, the pillar is divided into several narrow slices where compressive deformation is treated as uniformity. In the light of the compatibility condition of deformation, the total compressive displacement of the pillar is equal to the displacement of the beam in the middle span. An instability criterion is derived analytically based on the energy principle using a known size of localization band according to gradient dependent plasticity. The main advantage of the present model is that the effects of the constitutive parameters of rock and the geometrical size of structure are reflected in the criterion. The condition that the derivative of distributed load with respect to the deflection of the beam in the middle span is less than zero is not only equivalent to, but also even more concise in form than the instability criterion. To study the influences of constitutive parameters and geometrical size on stability, some examples are presented.展开更多
It has been confirmed that glass-forming ability （GFA） of supercooled liquids is related to not only liquid phase stability but also the crystallization resistance. In this paper, it is found that the liquid region ...It has been confirmed that glass-forming ability （GFA） of supercooled liquids is related to not only liquid phase stability but also the crystallization resistance. In this paper, it is found that the liquid region interval （T1 - Tg） characterized by the normalized parameter of Tg/T1 could reflect the stability of glass-forming liquids at the equilibrium state, whilst the normalization of supercooled liquid region △Tx=（Tx - Tg）, i.e. △Tx/Tx （wherein T1 is the liquidus temperature, Tg the glass transition temperature, and Tx the onset crystallization temperature） could indicate the crystallization resistance during glass formation. Thus, a new parameter, defined as ζ = Tg/T1＋△Tx/Tx is established to predict the GFA of supercooled liquids. In comparison with other commonly used criteria, this parameter demonstrates a better statistical correlation with the GFA for various glass-forming systems including metallic glasses, oxide glasses and cryoprotectants.展开更多
This paper concerns the absolute stability problem of discrete-time descriptor systems with feedback connected ferromagnetic hysteresis nonlinearities. The ferromagnetic hysteresis model satisfies the passivity condit...This paper concerns the absolute stability problem of discrete-time descriptor systems with feedback connected ferromagnetic hysteresis nonlinearities. The ferromagnetic hysteresis model satisfies the passivity conditions of hysteresis operator, that is the input-output relation of the transformed operator is passive. The bound condition of the solution of the ferromagnetic hysteresis model is given. Through the framework of loop transformation, an augmented discrete-time descriptor system model is established for the stability analysis. A new extended Tsypkin criterion for the absolute stability of discrete-time descriptor systems with hysteresis is presented based on the linear matrix inequalities technique. A numerical example is given to illustrate the effectiveness of the extended criterion.展开更多
By expanding the Gibbs free energy of a ternary system into a Taylor series with respect to the composition,a thermodynamic criterion of spinodal decomposition is conducted as G_(xx)(δx)2+2G_(xx)δxδy+G_(yy)(δy)~2&...By expanding the Gibbs free energy of a ternary system into a Taylor series with respect to the composition,a thermodynamic criterion of spinodal decomposition is conducted as G_(xx)(δx)2+2G_(xx)δxδy+G_(yy)(δy)~2<0,from which,various conditions of spinodal decomposition are discussed.When G_(xx)<0 G_(xy)~2-G_(xx)G_(yy)<0,it is called unstable decomposition unrestricted by the direction of composition fluctuation;when G_(xx)<0,G_(xy)~2-G_(xx)G_(yy)>0,or G_(xx)>0, G_(xy)~2-G_(xx)G_(yy)>0,as well as G_(xx)=0,are all considered as unstable decomposition restricted by the direction of composition fluctuation δx and δy.The phenomenon of turning round in composition during spinodal decomposition is attempted to be explained from above point of view.The computer calculated ranges of unstable decomposition according to the criterion of spinodal decomposition on Cu-Ni-Fe ternary system is consistent with the experimental re- sults obtained from literatures.展开更多
In this paper,the optimal viability decision problem of linear discrete-time stochastic systems with probability criterion is investigated.Under the condition of sequence-reachable discrete-time dynamic systems,the ex...In this paper,the optimal viability decision problem of linear discrete-time stochastic systems with probability criterion is investigated.Under the condition of sequence-reachable discrete-time dynamic systems,the existence theorem of optimal viability strategy is given and the solving procedure of the optimal strategy is provided based on dynamic programming.A numerical example shows the effectiveness of the proposed methods.展开更多
The safety margin criterion of nonlinear dynamic question of an elastic rotor system are given. A series of observing spaces were separated from integral space by resolving and polymerizing method. The stable_state tr...The safety margin criterion of nonlinear dynamic question of an elastic rotor system are given. A series of observing spaces were separated from integral space by resolving and polymerizing method. The stable_state trajectory of high dimensional nonlinear dynamic systems was got within integral space.According to international standard of rotor system vibration, energy limits of safety criterion were determined. The safety margin was calculated within a series of observing spaces by comparative positive_area criterion (CPAC) method. A quantitative example calculating safety margin for unbalance elastic rotor system was given by CPAC. The safety margin criterion proposed includes the calculation of current stability margin in engineering. This criterion is an effective method to solve quantitative calculation question of safety margin and stability margin for nonlinear dynamic systems.展开更多
In this paper, we presented a sufficient condition on the frequency domain for the absolutely stable analysis of the Takagi-Sugeno (T-S)fuzzy control system, based on the Popov’s criterion. we use some numerical exam...In this paper, we presented a sufficient condition on the frequency domain for the absolutely stable analysis of the Takagi-Sugeno (T-S)fuzzy control system, based on the Popov’s criterion. we use some numerical examples to illustrate the efficiency of frequency domain-based condition.展开更多
A frequency-domain-based sufficient condition is derived to guarantee the globally asymptotic stability of the simplest Takagi-Sugeno （T-S） fuzzy control system by using the circle criterion. The analysis is perform...A frequency-domain-based sufficient condition is derived to guarantee the globally asymptotic stability of the simplest Takagi-Sugeno （T-S） fuzzy control system by using the circle criterion. The analysis is performed in the frequency domain, and hence the condition is of great significance when the frequency-response method, which is widely used in the linear control theory and practice, is employed to synthesize the simplest T-S fuzzy controller. Besides, this sufficient condition is featured by a graphical interpretation, which makes the condition straightforward to be used. Comparisons are drawn between the performance of the simplest T-S fuzzy controller and that of the linear compensator. Two numerical examples are presented to demonstrate how this sufficient condition can be applied to both stable and unstable plants.展开更多
This paper proves a new regularity criterion ω: = rotu∈L1(0,T;B·0∞,∞) for the 3D generalized MHD system with fractional diffusion terms(-Δ)αu with α >9/8 and zero magnetic diffusivity. Here u is the flu...This paper proves a new regularity criterion ω: = rotu∈L1(0,T;B·0∞,∞) for the 3D generalized MHD system with fractional diffusion terms(-Δ)αu with α >9/8 and zero magnetic diffusivity. Here u is the fluid velocity,ω is the vorticity and B·0∞,∞is the homogeneous Besov space.展开更多
In this paper, we have considered a series-parallel system to find out optimum system reliability with an additional entropy objective function. Maximum system reliability of series-parallel system is depending on pro...In this paper, we have considered a series-parallel system to find out optimum system reliability with an additional entropy objective function. Maximum system reliability of series-parallel system is depending on proper allocation of redundancy component in different stage. The goal of entropy based reliability redundancy allocation problem is to find optimal number of redundancy component in each stage such a manner that maximize the system reliability subject to available total system cost. Global criterion method is used to analyze entropy based reliability optimization problem with different weight function of objective functions. Numerical examples have been provided to illustrate the model.展开更多
In this paper, an entanglement criterion for states in infinite dimensional bipartite quantum systems is presented. We generalize some of separability criterion that was recently introduced by Wu and Anandan in (Phys....In this paper, an entanglement criterion for states in infinite dimensional bipartite quantum systems is presented. We generalize some of separability criterion that was recently introduced by Wu and Anandan in (Phys. Lett. A, 2002, 297, 4-8) to infinite dimensional bipartite quantum systems. In addition, we give an example aimed to illustrate the application of the theorem.展开更多
A novel criterion of mixing time in gas-stirred ladle systems was proposed in this paper. The essential difference between the previous criterion and the present one is that the former is based on the concentration it...A novel criterion of mixing time in gas-stirred ladle systems was proposed in this paper. The essential difference between the previous criterion and the present one is that the former is based on the concentration itself while the latter is based on the variation rate of the concentration, which reflects the mixing efficiency directly. Experiment was carried out in an acrylic glass vessel with bottom blowing, and the tracer concentration was monitored by electrical conductivity probes. The mixing time obtained through the new criterion is approximately 20% less than that obtained through the 95% criterion, and the deviations of mixing times calculated from the new criterion are smaller than that from the previous one under the same conditions.展开更多
In this paper, we give necessary and sufficient conditions for absolute stability of several classes of direct control systems, and discuss the absolute stability of the first canonical form of control system. The cor...In this paper, we give necessary and sufficient conditions for absolute stability of several classes of direct control systems, and discuss the absolute stability of the first canonical form of control system. The corresponding results in references [3,5,6] and [7] are improved.展开更多
In this paper,an advanced satellite navigation filter design,referred to as the Variational Bayesian Maximum Correntropy Extended Kalman Filter(VBMCEKF),is introduced to enhance robustness and adaptability in scenario...In this paper,an advanced satellite navigation filter design,referred to as the Variational Bayesian Maximum Correntropy Extended Kalman Filter(VBMCEKF),is introduced to enhance robustness and adaptability in scenarios with non-Gaussian noise and heavy-tailed outliers.The proposed design modifies the extended Kalman filter(EKF)for the global navigation satellite system(GNSS),integrating the maximum correntropy criterion(MCC)and the variational Bayesian(VB)method.This adaptive algorithm effectively reduces non-line-of-sight(NLOS)reception contamination and improves estimation accuracy,particularly in time-varying GNSS measurements.Experimental results show that the proposed method significantly outperforms conventional approaches in estimation accuracy under heavy-tailed outliers and non-Gaussian noise.By combining MCC with VB approximation for real-time noise covariance estimation using fixed-point iteration,the VBMCEKF achieves superior filtering performance in challenging GNSS conditions.The method’s adaptability and precision make it ideal for improving satellite navigation performance in stochastic environments.展开更多
In the past few decades,the navigation performance of ships and structures in ice-covered waters has not been fully studied,especially the influence of ice mechanical properties on icebreaking ability.Ice bending stre...In the past few decades,the navigation performance of ships and structures in ice-covered waters has not been fully studied,especially the influence of ice mechanical properties on icebreaking ability.Ice bending strength is a key ice parameter for predicting ship ice loads,and accurate ice bending strength is also the key to scaling model tests results to real ship.However,numerical simulation studies on model ice bending strength of ice tanks are often neglected.In this paper,an explicit finite element method model is used to simulate the ice cantilever beam test,and the failure load and bending strength of the ice are obtained.In this model,the Tsai-Wu failure criterion is used as the material constitutive model,and the required simulation parameters are obtained from the model ice test in ice tank.Parameter sensitivity analysis shows that the cantilever beam size of the model ice has a significant effect on the flexural strength.The results show that proper rounding at the root of the cantilever beam is beneficial to reduce stress concentration and obtain more accurate bending strength;the thickness,width and length of the cantilever beam should conform to a certain ratio,and consistent with the ITTC recommended reference.Therefore,the results of this study can promote model ice experiments and numerical studies and provide ice strength data support for ship design and polar ship maneuvering.展开更多
Ground reinforcement is crucial for tunnel construction, especially in soft rock tunnels. Existing analytical models are inadequate for predicting the ground reaction curves (GRCs) for reinforced tunnels in strain-sof...Ground reinforcement is crucial for tunnel construction, especially in soft rock tunnels. Existing analytical models are inadequate for predicting the ground reaction curves (GRCs) for reinforced tunnels in strain-softening (SS) rock masses. This study proposes a novel analytical model to determine the GRCs of SS rock masses, incorporating ground reinforcement and intermediate principal stress (IPS). The SS constitutive model captures the progressive post- peak failure, while the elastic-brittle model simulates reinforced rock masses. Nine combined states are innovatively investigated to analyze plastic zone development in natural and reinforced regions. Each region is analyzed separately, and coupled through boundary conditions at interface. Comparison with three types of existing models indicates that these models overestimate reinforcement effects. The deformation prediction errors of single geological material models may exceed 75%. Furthermore, neglecting softening and residual zones in natural regions could lead to errors over 50%. Considering the IPS can effectively utilize the rock strength to reduce tunnel deformation by at least 30%, thereby saving on reinforcement and support costs. The computational results show a satisfactory agreement with the monitoring data from a model test and two tunnel projects. The proposed model may offer valuable insights into the design and construction of reinforced tunnel engineering.展开更多
基金Aeronautical Science Foundation of China (2006ZA51004)Fanzhou Foundation of China(20100506)
文摘During the process of aircraft design, the mathematical model of pilot control behavior characteristics is always used to predict aircraft flying qualities （FQ）. This is one of the important methods to avoid pilot-aircraft adverse coupling. In order to study the FQ criterion based on closed-loop pilot-aircraft systems, first, an experimental database is built, which includes 40 aircraft dynamics configurations and the corresponding flight simulation results. Second, the mathematical pilot models with a set of different aircraft configurations are obtained by this experimental database. Then, two FQ criteria, Neal-Smith criterion and Moscow Aviation Institute （MAI） criterion, are analyzed. And the relationship between the FQ level evaluated by actual pilot and the parameters of closed-loop pilot-aircraft systems is studied. Finally, an improved criterion of aircraft FQ is built based on the above two criteria. This new criterion is further used to predict FQ for four new aircraft dynamics configurations, and the prediction results verify its accuracy and practicability.
基金Project(51978666) supported by the National Natural Science Foundation of ChinaProject(2018-123-040) supported by the Guizhou Provincial Department of Transportation Foundation, ChinaProject(2019zzts009) supported by the Fundamental Research Funds for the Central Universities, China。
文摘Several potential failure modes generally exist in rock slopes because of the existence of massive structural planes in rock masses. A system reliability analyses method for rock slopes with multiple failure modes based on nonlinear Barton-Bandis failure criterion is proposed. The factors of safety associated with the sliding and overturning failure modes are derived, respectively. The validity of this method is verified through a planar rock slope with an inclined slope top and tension crack. Several sensitivity analyses are adopted to study the influences of structural-plane parameters, geometric parameters, anchoring parameters and fracture morphology on the rock slopes system reliability.
基金Project(51878668)supported by the National Natural Science Foundation of ChinaProjects(2017-122-058,2018-123-040)supported by the Guizhou Provincial Department of Transportation Foundation,ChinaProject([2018]2815)supported by the Guizhou Provincial Department of Science and Technology Foundation,China。
文摘Based on the nonlinear Barton–Bandis(B–B)failure criterion,this study considers the system reliability of rock wedge stability under the pseudo-static seismic load.The failure probability(Pf)of the system is calculated based on the Monte−Carlo method when considering parameter correlation and variability.Parameter analysis and sensitivity analysis are carried out to explore the influence of parameters on reliability.The relationships among the failure probability,safety factor(Fs),and variation coefficient are explored,and then stability probability curves of the rock wedge under the pseudo-static seismic load are drawn.The results show that the parameter correlation of the B–B failure criterion has a significant influence on the failure probability,but correlation increases system reliability or decreases system reliability affected by other parameters.Under the pseudo-static seismic action,sliding on both planes is the main failure mode of wedge system.In addition,the parameters with relatively high sensitivity are two angles related to the joint dip.When the coefficient of variation is consistent,the probability of system failure is a function of the safety factor.
文摘In this correspondence paper, an equivalent stability criterion with minimal number of linear matrix inequality （LMI） variables is presented for a delay-dependent stability criterion reported recently in the International Journal of Automation and Computing for a class of linear discrete-time systems with additive time delays. The reported stability criterion for the additive timedelay systems has more number of matrix variables in the LMI and, hence, demand additional computational burden. The proposed equivalent stability criterion, unlike the reported one, does not involve free-weighing matrices and encompass only the matrix variables that are associated in the Lyapunov-Krasovskii functional, making the criterion mathematically less complex and computationally more effective.
文摘A mechanical model is proposed for the system of elastic beam and strain-softening pillar where strain localization is initiated at peak shear stress. To obtain the plastic deformation of the pillar due to the shear slips of multiple shear bands, the pillar is divided into several narrow slices where compressive deformation is treated as uniformity. In the light of the compatibility condition of deformation, the total compressive displacement of the pillar is equal to the displacement of the beam in the middle span. An instability criterion is derived analytically based on the energy principle using a known size of localization band according to gradient dependent plasticity. The main advantage of the present model is that the effects of the constitutive parameters of rock and the geometrical size of structure are reflected in the criterion. The condition that the derivative of distributed load with respect to the deflection of the beam in the middle span is less than zero is not only equivalent to, but also even more concise in form than the instability criterion. To study the influences of constitutive parameters and geometrical size on stability, some examples are presented.
基金Project supported by National Science Council, Taiwan, China (Grant No NSC 94-2216-E-110-010)post-doc sponsorship from National Science Council, Taiwan, China (Grant No NSC 95-2816-E-110-001)
文摘It has been confirmed that glass-forming ability （GFA） of supercooled liquids is related to not only liquid phase stability but also the crystallization resistance. In this paper, it is found that the liquid region interval （T1 - Tg） characterized by the normalized parameter of Tg/T1 could reflect the stability of glass-forming liquids at the equilibrium state, whilst the normalization of supercooled liquid region △Tx=（Tx - Tg）, i.e. △Tx/Tx （wherein T1 is the liquidus temperature, Tg the glass transition temperature, and Tx the onset crystallization temperature） could indicate the crystallization resistance during glass formation. Thus, a new parameter, defined as ζ = Tg/T1＋△Tx/Tx is established to predict the GFA of supercooled liquids. In comparison with other commonly used criteria, this parameter demonstrates a better statistical correlation with the GFA for various glass-forming systems including metallic glasses, oxide glasses and cryoprotectants.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 50977008,60821063 and 61034005)National Basic Research Program of China (Grant No. 2009CB32060)
文摘This paper concerns the absolute stability problem of discrete-time descriptor systems with feedback connected ferromagnetic hysteresis nonlinearities. The ferromagnetic hysteresis model satisfies the passivity conditions of hysteresis operator, that is the input-output relation of the transformed operator is passive. The bound condition of the solution of the ferromagnetic hysteresis model is given. Through the framework of loop transformation, an augmented discrete-time descriptor system model is established for the stability analysis. A new extended Tsypkin criterion for the absolute stability of discrete-time descriptor systems with hysteresis is presented based on the linear matrix inequalities technique. A numerical example is given to illustrate the effectiveness of the extended criterion.
文摘By expanding the Gibbs free energy of a ternary system into a Taylor series with respect to the composition,a thermodynamic criterion of spinodal decomposition is conducted as G_(xx)(δx)2+2G_(xx)δxδy+G_(yy)(δy)~2<0,from which,various conditions of spinodal decomposition are discussed.When G_(xx)<0 G_(xy)~2-G_(xx)G_(yy)<0,it is called unstable decomposition unrestricted by the direction of composition fluctuation;when G_(xx)<0,G_(xy)~2-G_(xx)G_(yy)>0,or G_(xx)>0, G_(xy)~2-G_(xx)G_(yy)>0,as well as G_(xx)=0,are all considered as unstable decomposition restricted by the direction of composition fluctuation δx and δy.The phenomenon of turning round in composition during spinodal decomposition is attempted to be explained from above point of view.The computer calculated ranges of unstable decomposition according to the criterion of spinodal decomposition on Cu-Ni-Fe ternary system is consistent with the experimental re- sults obtained from literatures.
基金supported by the National Natural Science Foundation of China(No.70471049)
文摘In this paper,the optimal viability decision problem of linear discrete-time stochastic systems with probability criterion is investigated.Under the condition of sequence-reachable discrete-time dynamic systems,the existence theorem of optimal viability strategy is given and the solving procedure of the optimal strategy is provided based on dynamic programming.A numerical example shows the effectiveness of the proposed methods.
文摘The safety margin criterion of nonlinear dynamic question of an elastic rotor system are given. A series of observing spaces were separated from integral space by resolving and polymerizing method. The stable_state trajectory of high dimensional nonlinear dynamic systems was got within integral space.According to international standard of rotor system vibration, energy limits of safety criterion were determined. The safety margin was calculated within a series of observing spaces by comparative positive_area criterion (CPAC) method. A quantitative example calculating safety margin for unbalance elastic rotor system was given by CPAC. The safety margin criterion proposed includes the calculation of current stability margin in engineering. This criterion is an effective method to solve quantitative calculation question of safety margin and stability margin for nonlinear dynamic systems.
文摘In this paper, we presented a sufficient condition on the frequency domain for the absolutely stable analysis of the Takagi-Sugeno (T-S)fuzzy control system, based on the Popov’s criterion. we use some numerical examples to illustrate the efficiency of frequency domain-based condition.
文摘A frequency-domain-based sufficient condition is derived to guarantee the globally asymptotic stability of the simplest Takagi-Sugeno （T-S） fuzzy control system by using the circle criterion. The analysis is performed in the frequency domain, and hence the condition is of great significance when the frequency-response method, which is widely used in the linear control theory and practice, is employed to synthesize the simplest T-S fuzzy controller. Besides, this sufficient condition is featured by a graphical interpretation, which makes the condition straightforward to be used. Comparisons are drawn between the performance of the simplest T-S fuzzy controller and that of the linear compensator. Two numerical examples are presented to demonstrate how this sufficient condition can be applied to both stable and unstable plants.
文摘This paper proves a new regularity criterion ω: = rotu∈L1(0,T;B·0∞,∞) for the 3D generalized MHD system with fractional diffusion terms(-Δ)αu with α >9/8 and zero magnetic diffusivity. Here u is the fluid velocity,ω is the vorticity and B·0∞,∞is the homogeneous Besov space.
文摘In this paper, we have considered a series-parallel system to find out optimum system reliability with an additional entropy objective function. Maximum system reliability of series-parallel system is depending on proper allocation of redundancy component in different stage. The goal of entropy based reliability redundancy allocation problem is to find optimal number of redundancy component in each stage such a manner that maximize the system reliability subject to available total system cost. Global criterion method is used to analyze entropy based reliability optimization problem with different weight function of objective functions. Numerical examples have been provided to illustrate the model.
文摘In this paper, an entanglement criterion for states in infinite dimensional bipartite quantum systems is presented. We generalize some of separability criterion that was recently introduced by Wu and Anandan in (Phys. Lett. A, 2002, 297, 4-8) to infinite dimensional bipartite quantum systems. In addition, we give an example aimed to illustrate the application of the theorem.
基金financially supported by the National Natural Science Foundation of China (Nos. 51274030 and 51204001)
文摘A novel criterion of mixing time in gas-stirred ladle systems was proposed in this paper. The essential difference between the previous criterion and the present one is that the former is based on the concentration itself while the latter is based on the variation rate of the concentration, which reflects the mixing efficiency directly. Experiment was carried out in an acrylic glass vessel with bottom blowing, and the tracer concentration was monitored by electrical conductivity probes. The mixing time obtained through the new criterion is approximately 20% less than that obtained through the 95% criterion, and the deviations of mixing times calculated from the new criterion are smaller than that from the previous one under the same conditions.
文摘In this paper, we give necessary and sufficient conditions for absolute stability of several classes of direct control systems, and discuss the absolute stability of the first canonical form of control system. The corresponding results in references [3,5,6] and [7] are improved.
基金supported by the National Science and Technology Council,Taiwan under grants NSTC 111-2221-E-019-047 and NSTC 112-2221-E-019-030.
文摘In this paper,an advanced satellite navigation filter design,referred to as the Variational Bayesian Maximum Correntropy Extended Kalman Filter(VBMCEKF),is introduced to enhance robustness and adaptability in scenarios with non-Gaussian noise and heavy-tailed outliers.The proposed design modifies the extended Kalman filter(EKF)for the global navigation satellite system(GNSS),integrating the maximum correntropy criterion(MCC)and the variational Bayesian(VB)method.This adaptive algorithm effectively reduces non-line-of-sight(NLOS)reception contamination and improves estimation accuracy,particularly in time-varying GNSS measurements.Experimental results show that the proposed method significantly outperforms conventional approaches in estimation accuracy under heavy-tailed outliers and non-Gaussian noise.By combining MCC with VB approximation for real-time noise covariance estimation using fixed-point iteration,the VBMCEKF achieves superior filtering performance in challenging GNSS conditions.The method’s adaptability and precision make it ideal for improving satellite navigation performance in stochastic environments.
文摘In the past few decades,the navigation performance of ships and structures in ice-covered waters has not been fully studied,especially the influence of ice mechanical properties on icebreaking ability.Ice bending strength is a key ice parameter for predicting ship ice loads,and accurate ice bending strength is also the key to scaling model tests results to real ship.However,numerical simulation studies on model ice bending strength of ice tanks are often neglected.In this paper,an explicit finite element method model is used to simulate the ice cantilever beam test,and the failure load and bending strength of the ice are obtained.In this model,the Tsai-Wu failure criterion is used as the material constitutive model,and the required simulation parameters are obtained from the model ice test in ice tank.Parameter sensitivity analysis shows that the cantilever beam size of the model ice has a significant effect on the flexural strength.The results show that proper rounding at the root of the cantilever beam is beneficial to reduce stress concentration and obtain more accurate bending strength;the thickness,width and length of the cantilever beam should conform to a certain ratio,and consistent with the ITTC recommended reference.Therefore,the results of this study can promote model ice experiments and numerical studies and provide ice strength data support for ship design and polar ship maneuvering.
基金Projects(52208382, 52278387, 51738002) supported by the National Natural Science Foundation of ChinaProject(2022YJS072) supported by the Fundamental Research Funds for the Central Universities,China。
文摘Ground reinforcement is crucial for tunnel construction, especially in soft rock tunnels. Existing analytical models are inadequate for predicting the ground reaction curves (GRCs) for reinforced tunnels in strain-softening (SS) rock masses. This study proposes a novel analytical model to determine the GRCs of SS rock masses, incorporating ground reinforcement and intermediate principal stress (IPS). The SS constitutive model captures the progressive post- peak failure, while the elastic-brittle model simulates reinforced rock masses. Nine combined states are innovatively investigated to analyze plastic zone development in natural and reinforced regions. Each region is analyzed separately, and coupled through boundary conditions at interface. Comparison with three types of existing models indicates that these models overestimate reinforcement effects. The deformation prediction errors of single geological material models may exceed 75%. Furthermore, neglecting softening and residual zones in natural regions could lead to errors over 50%. Considering the IPS can effectively utilize the rock strength to reduce tunnel deformation by at least 30%, thereby saving on reinforcement and support costs. The computational results show a satisfactory agreement with the monitoring data from a model test and two tunnel projects. The proposed model may offer valuable insights into the design and construction of reinforced tunnel engineering.
