Airborne area-array whisk-broom imaging systems typically adopt constant-speed scanning schemes.For large-inertia scanning systems,constant-speed scanning requires substantial time to complete the reversal motion,redu...Airborne area-array whisk-broom imaging systems typically adopt constant-speed scanning schemes.For large-inertia scanning systems,constant-speed scanning requires substantial time to complete the reversal motion,reducing the system's adaptability to high-speed reversal scanning and decreasing scanning efficiency.This study proposes a novel sinusoidal variable-speed roll scanning strategy,which reduces abrupt changes in speed and acceleration,minimizing time loss during reversals.Based on the forward image motion compensation strategy in the pitch direction,we establish a line-of-sight(LOS)position calculation model with vertical flight path correction(VFPC),ensuring that the central LOS of the scanned image remains stable on the same horizontal line,facilitating accurate image stitching in whisk-broom imaging.Through theoretical analysis and simulation experiments,the proposed method improves the scanning efficiency by approximately 18.6%at a 90o whiskbroom imaging angle under the same speed height ratio conditions.The new VFPC method enables wide-field,high-resolution imaging,achieving single-line LOS horizontal stability with an accuracy of better than O.4 mrad.The research is of great significance to promote the further development of airborne area-array whisk-broom imaging technology toward wider fields of view,higher speed height ratios,and greater scanning efficiency.展开更多
In this paper, a planning algorithm for multi path/multi layer circular locus is poposed. The algorithm is applied to weld the nipples on the header of boiler. Multi path/multi layer circular locus is planned acco...In this paper, a planning algorithm for multi path/multi layer circular locus is poposed. The algorithm is applied to weld the nipples on the header of boiler. Multi path/multi layer circular locus is planned according to three teaching points, which is lapped head on end to satisfy the requirement of technology. For the nipples wherever they are arranged radially or axially, even if there are errors caused by positioning and thermal deformations, providing that nipple's position and orientation relative to the teaching one can be measured, the multi path/multi layer circular locus can be planned without teaching any more. The algorithm has been applied in welding robot for manufacturing power station' boiler.展开更多
Using real-time correction technology for typhoons, this paper discusses real-time correction for forecasting the track of four typhoons during 2009 and 2010 in Japan, Beijing, Guangzhou, and Shanghai. It was determin...Using real-time correction technology for typhoons, this paper discusses real-time correction for forecasting the track of four typhoons during 2009 and 2010 in Japan, Beijing, Guangzhou, and Shanghai. It was determined that the short-time forecast effect was better than the original objective mode. By selecting four types of integration schemes after multiple mode path integration for those four objective modes, the forecast effect of the multi-mode path integration is better, on average, than any single model. Moreover, multi-mode ensemble forecasting has obvious advantages during the initial 36 h.展开更多
Automatic navigation of an articulated drum roller, which is an articulated steering type vehicle widely used in the construction industry, is highly expected for operation cost reduction and improvement of work effi-...Automatic navigation of an articulated drum roller, which is an articulated steering type vehicle widely used in the construction industry, is highly expected for operation cost reduction and improvement of work effi- ciency. In order to achieve the path following control, considering that its steering system is articulated steering and two frames are articulated by an active revolute joint, a kinematic model and an error dynamic state-space equation of an articulated drum roller are proposed. Besides, a state- feedback control law based on Lyapunov stability theory is also designed, which can be proved to achieve the purpose of control by the analysis of stability. What＇s more, to evaluate the performance of the proposed method, simu- lation under the MATLAB/Simulink and experiments using positioning algorithm and errors correction at the uneven construction site are performed, with initial dis- placement error （-1.5 m）, heading error （-0.11 tad） and steering angle （-0.19 rad）. Finally, simulation and exper- imental results show that the errors and steering angle can decrease gradually, and converge to zero with time. Meanwhile, the control input is not saturated. An articu- lated drum roller can lock into a desired path with the proposed method in uneven fields.展开更多
The article initially reviews various works describing the physical model (PM) of Michelson’s interferometric experiment (ME), represented by the race between two swimmers Sw1, Sw2 (or boats, or planes, or sound sign...The article initially reviews various works describing the physical model (PM) of Michelson’s interferometric experiment (ME), represented by the race between two swimmers Sw1, Sw2 (or boats, or planes, or sound signals, etc.). The two swimmers must each swim the same distance, but Sw1 will swim along the river flow, and Sw2 will swim perpendicularly to this direction. In all such works, it is considered that Sw2’s path will require less time and that it will reach the start point first. However, in this work, it has been determined that in order to make this possible, Sw2 must not observe the orthogonality rule of his start direction. This action would be deceitful to the arbiters and thus considered as non-fair-play towards Sw1. The article proves by swimming times calculus, that if the fair-play rules are observed, then the correct crosswise path (in water reference frame) is a right triangle instead of the isosceles triangle considered by Michelson. Consequently, the two times shall be perfectly equal and the race ends in a tie, and the myth of Sw2 as the race winner shall be debunked. Note that the same result shall also be applicable to Michelson’s interferometric experiment (ME) as well as to any similar experiment. Therefore, utilising the isosceles triangle as the transversal path in PM and also in ME is an erroneous act.展开更多
基金Supported by the National Key Research and Development Program(2023YFC3107602)。
文摘Airborne area-array whisk-broom imaging systems typically adopt constant-speed scanning schemes.For large-inertia scanning systems,constant-speed scanning requires substantial time to complete the reversal motion,reducing the system's adaptability to high-speed reversal scanning and decreasing scanning efficiency.This study proposes a novel sinusoidal variable-speed roll scanning strategy,which reduces abrupt changes in speed and acceleration,minimizing time loss during reversals.Based on the forward image motion compensation strategy in the pitch direction,we establish a line-of-sight(LOS)position calculation model with vertical flight path correction(VFPC),ensuring that the central LOS of the scanned image remains stable on the same horizontal line,facilitating accurate image stitching in whisk-broom imaging.Through theoretical analysis and simulation experiments,the proposed method improves the scanning efficiency by approximately 18.6%at a 90o whiskbroom imaging angle under the same speed height ratio conditions.The new VFPC method enables wide-field,high-resolution imaging,achieving single-line LOS horizontal stability with an accuracy of better than O.4 mrad.The research is of great significance to promote the further development of airborne area-array whisk-broom imaging technology toward wider fields of view,higher speed height ratios,and greater scanning efficiency.
文摘In this paper, a planning algorithm for multi path/multi layer circular locus is poposed. The algorithm is applied to weld the nipples on the header of boiler. Multi path/multi layer circular locus is planned according to three teaching points, which is lapped head on end to satisfy the requirement of technology. For the nipples wherever they are arranged radially or axially, even if there are errors caused by positioning and thermal deformations, providing that nipple's position and orientation relative to the teaching one can be measured, the multi path/multi layer circular locus can be planned without teaching any more. The algorithm has been applied in welding robot for manufacturing power station' boiler.
基金National Natural Science Foundation of China(41475060,41275067,41405060)
文摘Using real-time correction technology for typhoons, this paper discusses real-time correction for forecasting the track of four typhoons during 2009 and 2010 in Japan, Beijing, Guangzhou, and Shanghai. It was determined that the short-time forecast effect was better than the original objective mode. By selecting four types of integration schemes after multiple mode path integration for those four objective modes, the forecast effect of the multi-mode path integration is better, on average, than any single model. Moreover, multi-mode ensemble forecasting has obvious advantages during the initial 36 h.
基金Supported by National Key Technology Support Program of China(Grant No.2015BAF07B05)Fundamental Research Funds for the Central Universities of China
文摘Automatic navigation of an articulated drum roller, which is an articulated steering type vehicle widely used in the construction industry, is highly expected for operation cost reduction and improvement of work effi- ciency. In order to achieve the path following control, considering that its steering system is articulated steering and two frames are articulated by an active revolute joint, a kinematic model and an error dynamic state-space equation of an articulated drum roller are proposed. Besides, a state- feedback control law based on Lyapunov stability theory is also designed, which can be proved to achieve the purpose of control by the analysis of stability. What＇s more, to evaluate the performance of the proposed method, simu- lation under the MATLAB/Simulink and experiments using positioning algorithm and errors correction at the uneven construction site are performed, with initial dis- placement error （-1.5 m）, heading error （-0.11 tad） and steering angle （-0.19 rad）. Finally, simulation and exper- imental results show that the errors and steering angle can decrease gradually, and converge to zero with time. Meanwhile, the control input is not saturated. An articu- lated drum roller can lock into a desired path with the proposed method in uneven fields.
文摘The article initially reviews various works describing the physical model (PM) of Michelson’s interferometric experiment (ME), represented by the race between two swimmers Sw1, Sw2 (or boats, or planes, or sound signals, etc.). The two swimmers must each swim the same distance, but Sw1 will swim along the river flow, and Sw2 will swim perpendicularly to this direction. In all such works, it is considered that Sw2’s path will require less time and that it will reach the start point first. However, in this work, it has been determined that in order to make this possible, Sw2 must not observe the orthogonality rule of his start direction. This action would be deceitful to the arbiters and thus considered as non-fair-play towards Sw1. The article proves by swimming times calculus, that if the fair-play rules are observed, then the correct crosswise path (in water reference frame) is a right triangle instead of the isosceles triangle considered by Michelson. Consequently, the two times shall be perfectly equal and the race ends in a tie, and the myth of Sw2 as the race winner shall be debunked. Note that the same result shall also be applicable to Michelson’s interferometric experiment (ME) as well as to any similar experiment. Therefore, utilising the isosceles triangle as the transversal path in PM and also in ME is an erroneous act.
