As a closed-loop learning control method,repetitive control has been widely used in a variety of areas from appliances to aviation.A repetitive control system features perfect reference tracking and disturbance reject...As a closed-loop learning control method,repetitive control has been widely used in a variety of areas from appliances to aviation.A repetitive control system features perfect reference tracking and disturbance rejection in the steady state for periodic signals with a fixed period.This characteristic is important not only for conventional technologies and conventional industries but also for advanced technologies and emerging industries.This paper first explains the concept of repetitive control from its original idea.Next,it describes the structure of a repetitive controller as an internal model and shows the respective points of continuous-and discrete-time repetitive control.It presents a categorized list of practical applications of repetitive control.Moreover,two concrete applications,namely the control of a robotic manipulator and a rotating system,demonstrate the validity of the method with experimental results.Several current studies in this field are also reviewed,and some challenges and future studies for repetitive control are provided.展开更多
This paper solves the problem of model-free dual-arm space robot maneuvering after non-cooperative target capture under high control quality requirements.The explicit system model is unavailable,and the maneuvering mi...This paper solves the problem of model-free dual-arm space robot maneuvering after non-cooperative target capture under high control quality requirements.The explicit system model is unavailable,and the maneuvering mission is disturbed by the measurement noise and the target adversarial behavior.To address these problems,a model-free Combined Adaptive-length Datadriven Predictive Controller(CADPC)is proposed.It consists of a separated subsystem identification method and a combined predictive control strategy.The subsystem identification method is composed of an adaptive data length,thereby reducing sensitivity to undetermined measurement noises and disturbances.Based on the subsystem identification,the combined predictive controller is established,reducing calculating resource.The stability of the CADPC is rigorously proven using the Input-to-State Stable(ISS)theorem and the small-gain theorem.Simulations demonstrate that CADPC effectively handles the model-free space robot post operation in the presence of significant disturbances,state measurement noise,and control input errors.It achieves improved steady-state accuracy,reduced steady-state control consumption,and minimized control input chattering.展开更多
To solve the problem of in-flight actuator faults and parameter uncertainties for multiple Unmanned Aerial Vehicles(UAVs),and reduce the communication and computational resource consumption of multiple UAVs,a Fraction...To solve the problem of in-flight actuator faults and parameter uncertainties for multiple Unmanned Aerial Vehicles(UAVs),and reduce the communication and computational resource consumption of multiple UAVs,a Fraction-Order(FO)sliding-mode Fault-Tolerant Cooperative Control(FTCC)strategy is proposed for multiple UAVs based on Event-Triggered Communication Mechanism(ET-COM-M)and Event-Triggered Control Mechanism(ET-CON-M).First,by considering the limited communication bandwidth of multiple UAVs in formation,an ET-COM-M is designed to significantly reduce communication times.Then,a distributed observer is skillfully constructed to estimate the reference signals for follower UAVs.Moreover,the adaptive strategy is incorporated into the Radial Basis Function Neural Network(RBFNN)to learn the lumped unknown terms for handling bias actuator faults and parameter uncertainties.Besides,the Nussbaum method is used to deal with the loss-of-effectiveness faults.To further achieve the refined control performance against faults,FO calculus is artfully integrated into the sliding-mode control protocol with ET-CON-M.Finally,Zeno behavior is excluded by rigorous theoretical analysis and Lyapunov stability is proved to show the effectiveness of the designed FTCC strategy.Simulation results show that the designed FTCC strategy with Event-Triggered Mechanism(ETM)can guarantee the safety of multiple UAVs and simultaneously reduce the communication and control frequencies,making the developed control scheme applicable in engineering.展开更多
This paper is concerned with adaptive consensus tracking control of nonlinear multi-agent systems with actuator faults and unknown nonidentical control directions under double semi-Markovian switching topologies.Consi...This paper is concerned with adaptive consensus tracking control of nonlinear multi-agent systems with actuator faults and unknown nonidentical control directions under double semi-Markovian switching topologies.Considering the complex working environment and the stability differences in communication links between leaders and followers,a double semi-Markov process is first introduced to describe the random switching of communication topologies in the leader-follower structure.In order to address challenges from the unknown nonidentical control directions and partial loss of effectiveness actuator faults,a completely independent parameter is introduced into the Nussbaum function to overcome the inherent obstacle of mutual cancellation and avoid the rapid growth rate.Considering only the state information of agents is transmitted among the agents,an adaptive distributed fault-tolerant consensus tracking control is proposed based on the double semi-Markovian switching topologies using the designed Nussbaum function.Furthermore,the stability of the closed-loop nonlinear multi-agent systems is analyzed using contradiction argument and Lyapunov theorem,from which the asymptotic consensus tracking in mean square sense can be obtained.A numerical simulation example is provided to verify the effectiveness of the proposed algorithm.展开更多
Existing control systems for coiling temperature struggle with significant time lags and multi-objective synchronous control during cooling,limiting their temperature control accuracy.To overcome these drawbacks,an on...Existing control systems for coiling temperature struggle with significant time lags and multi-objective synchronous control during cooling,limiting their temperature control accuracy.To overcome these drawbacks,an online cooling system featuring multi-objective collaborative control is proposed.The proposed system achieves the synchronous control of the ultra-fast cooling temperature,middle temperature,and coiling temperature.First,the run-out table cooling zone is divided into multiple logical control zones,and traditional mechanism models are improved by introducing multiple heat flux adaptive coefficients.Then,a dynamic feedforward control method is developed to correct potential deviations in the calculation process.Finally,to enhance the proposed control system’s accuracy and self-learning capability,a multi-objective real-time adaptation strategy is introduced for dynamic heat flux adaptive coefficients adjustment.Analysis and application results show that the proposed multi-objective collaborative control system significantly improves the temperature control accuracy while ensuring the consistency of mechanical properties.Comparison results indicate that,under the proposed control system,the coiling temperature control accuracy within ±20℃ for segments located at 50 m from the strip head is improved by 26%,compared with the original control system.In addition,using the proposed system,the standard deviation of the yield strength is decreased by 38%,compared with the original control system.展开更多
Dear Editor,This letter proposes a reinforcement learning-based predictive learning algorithm for unknown continuous-time nonlinear systems with observation loss.Firstly,we construct a temporal nonzero-sum game over p...Dear Editor,This letter proposes a reinforcement learning-based predictive learning algorithm for unknown continuous-time nonlinear systems with observation loss.Firstly,we construct a temporal nonzero-sum game over predictive control input sequences,deriving multiple optimal predictive control input sequences from its solution.展开更多
Sliding mode control(SMC)is a widely adopted control technology known for its robustness and simplicity.The essence of SMC is to use discontinuous control to drive a system into a pre-defined motion,called the sliding...Sliding mode control(SMC)is a widely adopted control technology known for its robustness and simplicity.The essence of SMC is to use discontinuous control to drive a system into a pre-defined motion,called the sliding mode,which is designed with desirable dynamical properties.In the sliding mode,the controlled system is insensitive to the matched uncertainties and disturbances.Most SMC theory and methods have been developed based on the dynamical systems in the continuous-time domain,where switching functions play a critical role.Ideal switching is supposed to be instantaneous,activating as soon as the switching condition is met.However,in practice,switching mechanisms are affected by imperfections such as time delays,unmodeled dynamics,defects,digitization effects,and actuation limitations,which can degrade the salient properties of SMC.Understanding these effects and developing mitigation strategies are essential for industrial applications.Furthermore,the advent of networked control environments presents new challenges like limited communication bandwidth,latency and cyberattack,which have seen the emergence of the event-triggered SMC recently.Despite these significant advances,there is a lack of comprehensive studies which examine the commonalities and distinctions of utilizing switching in SMC across the continuous-time and discrete-time domains and beyond.This paper investigates the role of switching in SMC from a spatio-temporal perspective,considering both state-space and time aspects.The aim is to facilitate better understanding of its effects and misbehaviors,and to unlock its full potential for future applications.The interplay between SMC methods in the continuous-time and discrete-time domains is analyzed,and their shared principles and unique challenges are identified.Furthermore,important technical issues relating to switching across these time domains are explored,and several myths and pitfalls in their theory and applications are depicted.The relationships of SMC with other switching-based control systems such as switched control systems,fuzzy control systems,and event-triggered control systems are discussed.The impact of networked control environments on SMC in the continuous-time and discrete-time domains is also examined.Finally,key challenges and opportunities are outlined for future work in SMC and beyond.展开更多
Steady speed control of agricultural machinery can improve operating quality and efficiency.To address the impact of farmland slope variations on the speed stability of unmanned operation agricultural machinery,a hybr...Steady speed control of agricultural machinery can improve operating quality and efficiency.To address the impact of farmland slope variations on the speed stability of unmanned operation agricultural machinery,a hybrid control method was proposed.This method included a hybrid controller composed of a slope-based controller and a proportional-integral-derivative(PID)controller.The speed of agricultural machinery was influenced by longitudinal forces,which were divided into two parts:one part was slope-related forces and conventional resistance,and the other was hard-to-estimate forces,such as sliding friction.For the first part,a slope-based controller was designed;for the second part,a PID controller was implemented.By combining these two controllers,the system can dynamically adjust the throttle opening and the brake master cylinder pressure,ensuring steady speed travel on sloping farmland.Simulation tests at a target speed of 7 km/h demonstrated that the proposed controller maintained a stable speed,achieving a root mean square error of 0.13 km/h and a mean absolute percentage error of 1.6%.Field tests on a practical experimental platform validated the method’s effectiveness,with results showing consistent control performance across varying slope conditions.The proposed controller demonstrated superior control performance.Experimental data verified that this method can achieve precise control of the agricultural machinery’s movement speed,meeting the stability requirements for agricultural operations.展开更多
This study investigates prescribed-time position tracking control for electromagnetic satellite formations subject to model uncertainties and external disturbances.Using the Clohessy-Wiltshire equations as the relativ...This study investigates prescribed-time position tracking control for electromagnetic satellite formations subject to model uncertainties and external disturbances.Using the Clohessy-Wiltshire equations as the relative motion dynamics model,a prescribed time output feedback control strategy is proposed.A prescribed-time extended state observer is designed to estimate the relative velocity and external disturbances.The disturbance estimates are then used as the feedforward component of the controller.Building on this framework,a novel prescribed-time active disturbance rejection control strategy for position tracking is developed via a backstepping control design.The convergence of the extended state observer and the stability of the closed-loop system are rigorously analyzed using Lyapunov stability theory.Numerical simulations are performed to validate the effectiveness of the proposed controller.展开更多
This paper presents an adaptive formation control method for a heterogeneous robot swarm,utilising a multilevel formation task tree to model various types of formation tasks and a single-state distributed k-winner-tak...This paper presents an adaptive formation control method for a heterogeneous robot swarm,utilising a multilevel formation task tree to model various types of formation tasks and a single-state distributed k-winner-take-all(S-DKWTA)algorithm to address the MRTA problem.In addition,we propose an enhanced load reassignment algorithm to resolve conflicts when using S-DKWTA.The S-DKWTA algorithm demonstrates the capability to manage multiple objectives and dynamically select leaders in real-time,thereby optimising formation efficiency and reducing energy consumption.The proposed approach integrates an enhanced artificial potential field(APF)to govern the motion of heterogeneous robot systems which encompasses both unmanned ground vehicles(UGVs)and unmanned aerial vehicles(UAVs),thereby achieving collision and obstacle avoidance.Simulations employing UGVs and UAVs swarm to achieve formation movement demonstrate the efficacy of this approach.The amalgamation of S-DKWTA and improved APF ensures stable and adaptable formation control,underscoring its potential for diverse multirobot applications.展开更多
Fluidic Thrust Vectoring(FTV)is used for the yaw attitude control of tailless flying wing,which can significantly improve stealth performance,maneuverability and lateral/heading maneuverability.The FTV control scheme ...Fluidic Thrust Vectoring(FTV)is used for the yaw attitude control of tailless flying wing,which can significantly improve stealth performance,maneuverability and lateral/heading maneuverability.The FTV control scheme of co-directional secondary flow was designed based on a 30 kgf thrust turbojet engine,an equivalent rudder deflection control variable of Mass Flow Combination(MFC)was proposed,and a control model was established to form a FTV control system scheme,which was integrated with the flight control system of a 100 kg tailless flying wing with medium aspect ratio to achieve closed-loop control of the yaw attitude based on FTV.The heading stability augmentation and maneuvering control characteristics and time response characteristics of tailless flying wing by FTV were quantitatively studied through virtual flight test in a wind tunnel at a wind speed of 35 m/s.The results show that the control strategy based on MFC achieves bidirectional continuous and stable control of thrust vector angle in a range of±11°,and the thrust vector angle varies monotonically with MFC;the co-directional FTV realizes bidirectional continuous and stable control of the yaw attitude of tailless flying wing,without longitudinal/lateral coupling moment.The increment of the maximum yawing moment coefficient is 0.0029,the maximum yaw rate is 7.55(°)/s,and the response time of the yaw rate of the vectoring nozzle actuated by the secondary flow is about 0.06 s,which satisfies the heading stability augmentation and maneuvering control response requirements of the aircraft with statically unstable heading,and provides new control means for the heading rudderless attitude control of tailless flying wing.展开更多
A novel aperiodically intermittent impulse control(AIIC)method is proposed to investigate the exponential synchronization in mean square(ESMS)of a class of impulsive stochastic infinite-dimensional systems with Poisso...A novel aperiodically intermittent impulse control(AIIC)method is proposed to investigate the exponential synchronization in mean square(ESMS)of a class of impulsive stochastic infinite-dimensional systems with Poisson jumps(ISIDSP).The AIIC control strategy inherits the flexibility of aperiodically intermittent control,including the variable control period,adjustable control interval length,and the discretization of impulsive control.In addition,this article introduces a novel mild Itô's formula.By leveraging semigroup theory,the contraction mapping principle,and graph theory,along with constructing the Lyapunov function,the criterion for the existence and uniqueness of a mild solution of ISIDSP is thereby established.Furthermore,the mean-square exponential synchronization problem of the above systems is resolved,and the constraints within the mild solution domain are alleviated.These criteria clarify the impact of control parameters,control intervals and network topology on ESMS.The theoretical results are subsequently applied to a class of neural networks with reaction-diffusion processes,and the validity of the results is verified using numerical simulations.展开更多
The increasing interconnection of modern industrial control systems(ICSs)with the Internet has enhanced operational efficiency,but alsomade these systemsmore vulnerable to cyberattacks.This heightened exposure has dri...The increasing interconnection of modern industrial control systems(ICSs)with the Internet has enhanced operational efficiency,but alsomade these systemsmore vulnerable to cyberattacks.This heightened exposure has driven a growing need for robust ICS security measures.Among the key defences,intrusion detection technology is critical in identifying threats to ICS networks.This paper provides an overview of the distinctive characteristics of ICS network security,highlighting standard attack methods.It then examines various intrusion detection methods,including those based on misuse detection,anomaly detection,machine learning,and specialised requirements.This paper concludes by exploring future directions for developing intrusion detection systems to advance research and ensure the continued security and reliability of ICS operations.展开更多
As an important resource in data link,time slots should be strategically allocated to enhance transmission efficiency and resist eavesdropping,especially considering the tremendous increase in the number of nodes and ...As an important resource in data link,time slots should be strategically allocated to enhance transmission efficiency and resist eavesdropping,especially considering the tremendous increase in the number of nodes and diverse communication needs.It is crucial to design control sequences with robust randomness and conflict-freeness to properly address differentiated access control in data link.In this paper,we propose a hierarchical access control scheme based on control sequences to achieve high utilization of time slots and differentiated access control.A theoretical bound of the hierarchical control sequence set is derived to characterize the constraints on the parameters of the sequence set.Moreover,two classes of optimal hierarchical control sequence sets satisfying the theoretical bound are constructed,both of which enable the scheme to achieve maximum utilization of time slots.Compared with the fixed time slot allocation scheme,our scheme reduces the symbol error rate by up to 9%,which indicates a significant improvement in anti-interference and eavesdropping capabilities.展开更多
The hybrid series-parallel microgrid attracts more attention by combining the advantages of both the series-stacked voltage and parallel-expanded capacity.Low-voltage distributed generations(DGs)are connected in serie...The hybrid series-parallel microgrid attracts more attention by combining the advantages of both the series-stacked voltage and parallel-expanded capacity.Low-voltage distributed generations(DGs)are connected in series to form the intra-string,and then multiple strings are interconnected in parallel.For the existing control strategies,both intra-string and inter-string depend on the centralized or distributed control with high communication reliance.It has limited scalability and redundancy under abnormal conditions.Alternatively,in this study,an intra-string distributed and inter-string decentralized control framework is proposed.Within the string,a few DGs close to the AC bus are the leaders to get the string power information and the rest DGs are the followers to acquire the synchronization information through the droop-based distributed consistency.Specifically,the output of the entire string has the active power−angular frequency(ω-P)droop characteristic,and the decentralized control among strings can be autonomously guaranteed.Moreover,the secondary control is designed to realize multi-mode objectives,including on/off-grid mode switching,grid-connected power interactive management,and off-grid voltage quality regulation.As a result,the proposed method has the ability of plug-and-play capabilities,single-point failure redundancy,and seamless mode-switching.Experimental results are provided to verify the effectiveness of the proposed practical solution.展开更多
Networked predictive control(NPC) has gained significant attention in recent years for its ability to effectively and actively address communication constraints in networked control systems(NCSs),such as network-induc...Networked predictive control(NPC) has gained significant attention in recent years for its ability to effectively and actively address communication constraints in networked control systems(NCSs),such as network-induced delays,packet dropouts,and packet disorders.Despite significant advancements,the increasing complexity and dynamism of network environments,along with the growing complexity of systems,pose new challenges for NPC.These challenges include difficulties in system modeling,cyber attacks,component faults,limited network bandwidth,and the necessity for distributed collaboration.This survey aims to provide a comprehensive review of NPC strategies.It begins with a summary of the primary challenges faced by NCSs,followed by an introduction to the control structure and core concepts of NPC.The survey then discusses several typical NPC schemes and examines their extensions in the areas of secure control,fault-tolerant control,distributed coordinated control,and event-triggered control.Moreover,it reviews notable works that have implemented these schemes.Finally,the survey concludes by exploring typical applications of NPC schemes and highlighting several challenging issues that could guide future research efforts.展开更多
Spaceborne optomechanical systems face the dual challenges of extreme thermal disturbances and millikelvin-level temperature control precision during orbital operations,demanding robust control strategies.To address t...Spaceborne optomechanical systems face the dual challenges of extreme thermal disturbances and millikelvin-level temperature control precision during orbital operations,demanding robust control strategies.To address the performance limitations of conventional fixed-parameter active disturbance rejection control(ADRC)under complex operating conditions,this work proposes a Qlearning-enhanced adaptive ADRC framework.A thermal-transfer model incorporating multisource disturbances(solar radiation,structural conduction,and contact thermal resistance)is established,coupled with a reinforcement learning-driven parameter optimization mechanism.The ε-greedy policy dynamically adjusts observer bandwidth(ω_(o)∈[0.01,0.2])and controller bandwidth(ω_(c)∈[0.01,0.1])to enable real-time estimation and compensation of total disturbances.Simulation results demonstrate significant improvements over fixed-parameter ADRC and a self-tuning internal model control proportional-integral(SIMC-PI)controller:31.3% and 15.4% reduction in settling time during setpoint responses,respectively;21.8% lower integral absolute error(IAE)than the fixed-parameter ADRC during setpoint step responses;12.7% and 52.5% enhancement in control precision over conventional fixed-parameter and SIMC-PI controllers,respectively,under±10 K periodic and step thermal disturbances.Monte Carlo robustness tests reveal smaller fluctuation ranges of IAE,settling time,and overshoot under±5% parameter perturbations.This methodology establishes a new paradigm for millikelvin-level thermal control in space optical payloads.展开更多
In this paper,we define for the trace operator,the solution of certain models of vibrating plates standards with initial data in a strategic region spaces of weak regularities.Indeed,we know that the notion of regiona...In this paper,we define for the trace operator,the solution of certain models of vibrating plates standards with initial data in a strategic region spaces of weak regularities.Indeed,we know that the notion of regional controllability is more adapted to systems described by dynamic systems.Regional controllability results in a strategic area were established for vibrating plates by the Hilbertian Uniqueness Method.展开更多
Molten salt reactors,being the only reactor type among Generation Ⅳ advanced nuclear reactors that utilize liquid fuels,offer inherent safety,high-temperature,and low-pressure operation,as well as the capability for ...Molten salt reactors,being the only reactor type among Generation Ⅳ advanced nuclear reactors that utilize liquid fuels,offer inherent safety,high-temperature,and low-pressure operation,as well as the capability for online fuel reprocessing.However,the fuel-salt flow results in the decay of delayed neutron precursors(DNPs)outside the core,causing fluctuations in the effective delayed neutron fraction and consequently impacting the reactor reactivity.Particularly in accident scenarios—such as a combined pump shutdown and the inability to rapidly scram the reactor—the sole reliance on negative temperature feedback may cause a significant increase in core temperature,posing a threat to reactor safety.To address these problems,this paper introduces an innovative design for a passive fluid-driven suspended control rod(SCR)to dynamically compensate for reactivity fluctuations caused by DNPs flowing with the fuel.The control rod operates passively by leveraging the combined effects of gravity,buoyancy,and fluid dynamic forces,thereby eliminating the need for an external drive mechanism and enabling direct integration within the active region of the core.Using a 150 MWt thorium-based molten salt reactor as the reference design,we develop a mathematical model to systematically analyze the effects of key parameters—including the geometric dimensions and density of the SCR—on its performance.We examine its motion characteristics under different core flow conditions and assess its feasibility for the dynamic compensation of reactivity changes caused by fuel flow.The results of this study demonstrate that the SCR can effectively counteract reactivity fluctuations induced by fuel flow within molten salt reactors.A sensitivity analysis reveals that the SCR’s average density exerts a profound impact on its start-up flow threshold,channel flow rate,resistance to fuel density fluctuations,and response characteristics.This underscores the critical need to optimize this parameter.Moreover,by judiciously selecting the SCR’s length,number of deployed units,and the placement we can achieve the necessary reactivity control while maintaining a favorable balance between neutron economy and heat transfer performance.Ultimately,this paper provides an innovative solution for the passive reactivity control in molten salt reactors,offering significant potential for practical engineering applications.展开更多
Electrically controlled solid propellant(ECSP)offers multiple ignition and adjustable burning rate,serving as fuel for next-generation intelligent propulsion systems.To further enhance the combustion performance of EC...Electrically controlled solid propellant(ECSP)offers multiple ignition and adjustable burning rate,serving as fuel for next-generation intelligent propulsion systems.To further enhance the combustion performance of ECSP,a method utilizing electrochemical and thermal decomposition catalysts has been proposed.In this work,we investigated the combustion characteristics of hydroxylamine nitrate(HAN)-based ECSP incorporating cerium oxide(CeO_(2))and graphene oxide(GO)by using an electrically controlled combustion test system.Electrochemical impedance spectroscopy(EIS)and linear sweep voltammetry(LSV)were used to measure the electrical conductibility and overpotential of ECSP with various additives,and Tafel curves were calculated.Thermogravimetric analysis coupled with differential scanning calorimetry(TG-DSC)was employed to investigate the thermal decomposition behavior of ECSP.While the addition of CeO_(2) and GO reduced the conductivity of ECSP,both catalysts exhibited strong electrocatalytic properties and facilitated the thermal decomposition of ECSP.Between two catalysts,GO demonstrated superior electrochemical catalytic performance but weaker thermal decomposition catalytic ability than CeO_(2).The addition of catalysts significantly enhanced the combustion performance of HAN-based ECSP.Specifically,the ignition delay time was shortened by 10%~20%.CeO_(2) raised the burning rate by approximately 20%but GO exhibited a remarkable boost of 40%in burning rate at high voltage.The combination of GO and PVA produced a flame-retardant substance that negatively impacted the ignition delay of ECSP and resulted in a smaller increase in the burning rate of ECSP at low ignition voltages.展开更多
基金supported in part by the Japan Society for the Promotion of Science Grants-in-Aid for Scientific Research(B)(23K25252,24K03325)the National Natural Science Foundation of China(61873348)the Natural Science Foundation of Hubei Province,China(2020CFA031)。
文摘As a closed-loop learning control method,repetitive control has been widely used in a variety of areas from appliances to aviation.A repetitive control system features perfect reference tracking and disturbance rejection in the steady state for periodic signals with a fixed period.This characteristic is important not only for conventional technologies and conventional industries but also for advanced technologies and emerging industries.This paper first explains the concept of repetitive control from its original idea.Next,it describes the structure of a repetitive controller as an internal model and shows the respective points of continuous-and discrete-time repetitive control.It presents a categorized list of practical applications of repetitive control.Moreover,two concrete applications,namely the control of a robotic manipulator and a rotating system,demonstrate the validity of the method with experimental results.Several current studies in this field are also reviewed,and some challenges and future studies for repetitive control are provided.
基金supported by the National Natural Science Foundation of China(No.12372045)the National Key Research and the Development Program of China(Nos.2023YFC2205900,2023YFC2205901)。
文摘This paper solves the problem of model-free dual-arm space robot maneuvering after non-cooperative target capture under high control quality requirements.The explicit system model is unavailable,and the maneuvering mission is disturbed by the measurement noise and the target adversarial behavior.To address these problems,a model-free Combined Adaptive-length Datadriven Predictive Controller(CADPC)is proposed.It consists of a separated subsystem identification method and a combined predictive control strategy.The subsystem identification method is composed of an adaptive data length,thereby reducing sensitivity to undetermined measurement noises and disturbances.Based on the subsystem identification,the combined predictive controller is established,reducing calculating resource.The stability of the CADPC is rigorously proven using the Input-to-State Stable(ISS)theorem and the small-gain theorem.Simulations demonstrate that CADPC effectively handles the model-free space robot post operation in the presence of significant disturbances,state measurement noise,and control input errors.It achieves improved steady-state accuracy,reduced steady-state control consumption,and minimized control input chattering.
基金supported in part by National Natural Science Foundation of China(Nos.62373188,62003162)the Natural Science Foundation of Jiangsu Province of China(Nos.BK20240182,BK20222012)+2 种基金the Industry-University Research Innovation Foundation for the Chinese Ministry of Education(No.2021ZYA02005)the Aeronautical Science Foundation of China(Nos.20220007052003,20200007018001)the Fundamental Research Funds for the Central Universities,China(Nos.NE2024004,NI2024001)。
文摘To solve the problem of in-flight actuator faults and parameter uncertainties for multiple Unmanned Aerial Vehicles(UAVs),and reduce the communication and computational resource consumption of multiple UAVs,a Fraction-Order(FO)sliding-mode Fault-Tolerant Cooperative Control(FTCC)strategy is proposed for multiple UAVs based on Event-Triggered Communication Mechanism(ET-COM-M)and Event-Triggered Control Mechanism(ET-CON-M).First,by considering the limited communication bandwidth of multiple UAVs in formation,an ET-COM-M is designed to significantly reduce communication times.Then,a distributed observer is skillfully constructed to estimate the reference signals for follower UAVs.Moreover,the adaptive strategy is incorporated into the Radial Basis Function Neural Network(RBFNN)to learn the lumped unknown terms for handling bias actuator faults and parameter uncertainties.Besides,the Nussbaum method is used to deal with the loss-of-effectiveness faults.To further achieve the refined control performance against faults,FO calculus is artfully integrated into the sliding-mode control protocol with ET-CON-M.Finally,Zeno behavior is excluded by rigorous theoretical analysis and Lyapunov stability is proved to show the effectiveness of the designed FTCC strategy.Simulation results show that the designed FTCC strategy with Event-Triggered Mechanism(ETM)can guarantee the safety of multiple UAVs and simultaneously reduce the communication and control frequencies,making the developed control scheme applicable in engineering.
基金supported by the National Natural Science Foundation of China(62333011,62020106003)the Natural Science Foundation of Jiangsu Province of China(BK20222012)+1 种基金the Fundamental Research Funds for the Central Universities(NE2024005)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX24_0594)。
文摘This paper is concerned with adaptive consensus tracking control of nonlinear multi-agent systems with actuator faults and unknown nonidentical control directions under double semi-Markovian switching topologies.Considering the complex working environment and the stability differences in communication links between leaders and followers,a double semi-Markov process is first introduced to describe the random switching of communication topologies in the leader-follower structure.In order to address challenges from the unknown nonidentical control directions and partial loss of effectiveness actuator faults,a completely independent parameter is introduced into the Nussbaum function to overcome the inherent obstacle of mutual cancellation and avoid the rapid growth rate.Considering only the state information of agents is transmitted among the agents,an adaptive distributed fault-tolerant consensus tracking control is proposed based on the double semi-Markovian switching topologies using the designed Nussbaum function.Furthermore,the stability of the closed-loop nonlinear multi-agent systems is analyzed using contradiction argument and Lyapunov theorem,from which the asymptotic consensus tracking in mean square sense can be obtained.A numerical simulation example is provided to verify the effectiveness of the proposed algorithm.
基金financially supported by the National Key Research and Development Program of China(2022YFB3304800)the National Natural Science Foundation of China(Nos.52074085 and U21A20117).
文摘Existing control systems for coiling temperature struggle with significant time lags and multi-objective synchronous control during cooling,limiting their temperature control accuracy.To overcome these drawbacks,an online cooling system featuring multi-objective collaborative control is proposed.The proposed system achieves the synchronous control of the ultra-fast cooling temperature,middle temperature,and coiling temperature.First,the run-out table cooling zone is divided into multiple logical control zones,and traditional mechanism models are improved by introducing multiple heat flux adaptive coefficients.Then,a dynamic feedforward control method is developed to correct potential deviations in the calculation process.Finally,to enhance the proposed control system’s accuracy and self-learning capability,a multi-objective real-time adaptation strategy is introduced for dynamic heat flux adaptive coefficients adjustment.Analysis and application results show that the proposed multi-objective collaborative control system significantly improves the temperature control accuracy while ensuring the consistency of mechanical properties.Comparison results indicate that,under the proposed control system,the coiling temperature control accuracy within ±20℃ for segments located at 50 m from the strip head is improved by 26%,compared with the original control system.In addition,using the proposed system,the standard deviation of the yield strength is decreased by 38%,compared with the original control system.
基金supported by the National Natural Science Foundation of China(62433014,62373287,62573324,62333005,62273255)in part by the International Exchange Program for Graduate Students of Tongji University(4360143306)+3 种基金in part by the Fundamental Research Funds for Central Universities(22120230311)supported by DeutscheForschungsgemeinschaft(DFG,German Research Foundation)under Germany’s Excellence Strategy(EXC 2075390740016,468094890)support by the Stuttgart Center for Simulation Science(SimTech)the International Max Planck Research School for Intelligent Systems(IMPRS-IS)for supporting Y.Xie。
文摘Dear Editor,This letter proposes a reinforcement learning-based predictive learning algorithm for unknown continuous-time nonlinear systems with observation loss.Firstly,we construct a temporal nonzero-sum game over predictive control input sequences,deriving multiple optimal predictive control input sequences from its solution.
基金supported in part by the Australian Research Council(DP240100830)。
文摘Sliding mode control(SMC)is a widely adopted control technology known for its robustness and simplicity.The essence of SMC is to use discontinuous control to drive a system into a pre-defined motion,called the sliding mode,which is designed with desirable dynamical properties.In the sliding mode,the controlled system is insensitive to the matched uncertainties and disturbances.Most SMC theory and methods have been developed based on the dynamical systems in the continuous-time domain,where switching functions play a critical role.Ideal switching is supposed to be instantaneous,activating as soon as the switching condition is met.However,in practice,switching mechanisms are affected by imperfections such as time delays,unmodeled dynamics,defects,digitization effects,and actuation limitations,which can degrade the salient properties of SMC.Understanding these effects and developing mitigation strategies are essential for industrial applications.Furthermore,the advent of networked control environments presents new challenges like limited communication bandwidth,latency and cyberattack,which have seen the emergence of the event-triggered SMC recently.Despite these significant advances,there is a lack of comprehensive studies which examine the commonalities and distinctions of utilizing switching in SMC across the continuous-time and discrete-time domains and beyond.This paper investigates the role of switching in SMC from a spatio-temporal perspective,considering both state-space and time aspects.The aim is to facilitate better understanding of its effects and misbehaviors,and to unlock its full potential for future applications.The interplay between SMC methods in the continuous-time and discrete-time domains is analyzed,and their shared principles and unique challenges are identified.Furthermore,important technical issues relating to switching across these time domains are explored,and several myths and pitfalls in their theory and applications are depicted.The relationships of SMC with other switching-based control systems such as switched control systems,fuzzy control systems,and event-triggered control systems are discussed.The impact of networked control environments on SMC in the continuous-time and discrete-time domains is also examined.Finally,key challenges and opportunities are outlined for future work in SMC and beyond.
文摘Steady speed control of agricultural machinery can improve operating quality and efficiency.To address the impact of farmland slope variations on the speed stability of unmanned operation agricultural machinery,a hybrid control method was proposed.This method included a hybrid controller composed of a slope-based controller and a proportional-integral-derivative(PID)controller.The speed of agricultural machinery was influenced by longitudinal forces,which were divided into two parts:one part was slope-related forces and conventional resistance,and the other was hard-to-estimate forces,such as sliding friction.For the first part,a slope-based controller was designed;for the second part,a PID controller was implemented.By combining these two controllers,the system can dynamically adjust the throttle opening and the brake master cylinder pressure,ensuring steady speed travel on sloping farmland.Simulation tests at a target speed of 7 km/h demonstrated that the proposed controller maintained a stable speed,achieving a root mean square error of 0.13 km/h and a mean absolute percentage error of 1.6%.Field tests on a practical experimental platform validated the method’s effectiveness,with results showing consistent control performance across varying slope conditions.The proposed controller demonstrated superior control performance.Experimental data verified that this method can achieve precise control of the agricultural machinery’s movement speed,meeting the stability requirements for agricultural operations.
文摘This study investigates prescribed-time position tracking control for electromagnetic satellite formations subject to model uncertainties and external disturbances.Using the Clohessy-Wiltshire equations as the relative motion dynamics model,a prescribed time output feedback control strategy is proposed.A prescribed-time extended state observer is designed to estimate the relative velocity and external disturbances.The disturbance estimates are then used as the feedforward component of the controller.Building on this framework,a novel prescribed-time active disturbance rejection control strategy for position tracking is developed via a backstepping control design.The convergence of the extended state observer and the stability of the closed-loop system are rigorously analyzed using Lyapunov stability theory.Numerical simulations are performed to validate the effectiveness of the proposed controller.
基金supported by the National Natural Science Foundation of China(624B2140).
文摘This paper presents an adaptive formation control method for a heterogeneous robot swarm,utilising a multilevel formation task tree to model various types of formation tasks and a single-state distributed k-winner-take-all(S-DKWTA)algorithm to address the MRTA problem.In addition,we propose an enhanced load reassignment algorithm to resolve conflicts when using S-DKWTA.The S-DKWTA algorithm demonstrates the capability to manage multiple objectives and dynamically select leaders in real-time,thereby optimising formation efficiency and reducing energy consumption.The proposed approach integrates an enhanced artificial potential field(APF)to govern the motion of heterogeneous robot systems which encompasses both unmanned ground vehicles(UGVs)and unmanned aerial vehicles(UAVs),thereby achieving collision and obstacle avoidance.Simulations employing UGVs and UAVs swarm to achieve formation movement demonstrate the efficacy of this approach.The amalgamation of S-DKWTA and improved APF ensures stable and adaptable formation control,underscoring its potential for diverse multirobot applications.
文摘Fluidic Thrust Vectoring(FTV)is used for the yaw attitude control of tailless flying wing,which can significantly improve stealth performance,maneuverability and lateral/heading maneuverability.The FTV control scheme of co-directional secondary flow was designed based on a 30 kgf thrust turbojet engine,an equivalent rudder deflection control variable of Mass Flow Combination(MFC)was proposed,and a control model was established to form a FTV control system scheme,which was integrated with the flight control system of a 100 kg tailless flying wing with medium aspect ratio to achieve closed-loop control of the yaw attitude based on FTV.The heading stability augmentation and maneuvering control characteristics and time response characteristics of tailless flying wing by FTV were quantitatively studied through virtual flight test in a wind tunnel at a wind speed of 35 m/s.The results show that the control strategy based on MFC achieves bidirectional continuous and stable control of thrust vector angle in a range of±11°,and the thrust vector angle varies monotonically with MFC;the co-directional FTV realizes bidirectional continuous and stable control of the yaw attitude of tailless flying wing,without longitudinal/lateral coupling moment.The increment of the maximum yawing moment coefficient is 0.0029,the maximum yaw rate is 7.55(°)/s,and the response time of the yaw rate of the vectoring nozzle actuated by the secondary flow is about 0.06 s,which satisfies the heading stability augmentation and maneuvering control response requirements of the aircraft with statically unstable heading,and provides new control means for the heading rudderless attitude control of tailless flying wing.
基金supported in part by the National Natural Science Foundation of China(12471422,62573274,12371173)the Natural Science Foundation of Shandong Province of China(ZR2022LLZ003,ZR2024MF001)the Funding for Visiting Studies and Research by Teachers in Ordinary Undergraduate Colleges and Universities in Shandong Province。
文摘A novel aperiodically intermittent impulse control(AIIC)method is proposed to investigate the exponential synchronization in mean square(ESMS)of a class of impulsive stochastic infinite-dimensional systems with Poisson jumps(ISIDSP).The AIIC control strategy inherits the flexibility of aperiodically intermittent control,including the variable control period,adjustable control interval length,and the discretization of impulsive control.In addition,this article introduces a novel mild Itô's formula.By leveraging semigroup theory,the contraction mapping principle,and graph theory,along with constructing the Lyapunov function,the criterion for the existence and uniqueness of a mild solution of ISIDSP is thereby established.Furthermore,the mean-square exponential synchronization problem of the above systems is resolved,and the constraints within the mild solution domain are alleviated.These criteria clarify the impact of control parameters,control intervals and network topology on ESMS.The theoretical results are subsequently applied to a class of neural networks with reaction-diffusion processes,and the validity of the results is verified using numerical simulations.
文摘The increasing interconnection of modern industrial control systems(ICSs)with the Internet has enhanced operational efficiency,but alsomade these systemsmore vulnerable to cyberattacks.This heightened exposure has driven a growing need for robust ICS security measures.Among the key defences,intrusion detection technology is critical in identifying threats to ICS networks.This paper provides an overview of the distinctive characteristics of ICS network security,highlighting standard attack methods.It then examines various intrusion detection methods,including those based on misuse detection,anomaly detection,machine learning,and specialised requirements.This paper concludes by exploring future directions for developing intrusion detection systems to advance research and ensure the continued security and reliability of ICS operations.
基金supported by the National Science Foundation of China(No.62171387)the Science and Technology Program of Sichuan Province(No.2024NSFSC0468)the China Postdoctoral Science Foundation(No.2019M663475).
文摘As an important resource in data link,time slots should be strategically allocated to enhance transmission efficiency and resist eavesdropping,especially considering the tremendous increase in the number of nodes and diverse communication needs.It is crucial to design control sequences with robust randomness and conflict-freeness to properly address differentiated access control in data link.In this paper,we propose a hierarchical access control scheme based on control sequences to achieve high utilization of time slots and differentiated access control.A theoretical bound of the hierarchical control sequence set is derived to characterize the constraints on the parameters of the sequence set.Moreover,two classes of optimal hierarchical control sequence sets satisfying the theoretical bound are constructed,both of which enable the scheme to achieve maximum utilization of time slots.Compared with the fixed time slot allocation scheme,our scheme reduces the symbol error rate by up to 9%,which indicates a significant improvement in anti-interference and eavesdropping capabilities.
基金supported by the Smart Grid-National Science and Technology Major Project(2025ZD0804500)the National Natural Science Foundation of China under Grant 52307232the Hunan Provincial Natural Science Foundation of China under Grant 2024JJ4055.
文摘The hybrid series-parallel microgrid attracts more attention by combining the advantages of both the series-stacked voltage and parallel-expanded capacity.Low-voltage distributed generations(DGs)are connected in series to form the intra-string,and then multiple strings are interconnected in parallel.For the existing control strategies,both intra-string and inter-string depend on the centralized or distributed control with high communication reliance.It has limited scalability and redundancy under abnormal conditions.Alternatively,in this study,an intra-string distributed and inter-string decentralized control framework is proposed.Within the string,a few DGs close to the AC bus are the leaders to get the string power information and the rest DGs are the followers to acquire the synchronization information through the droop-based distributed consistency.Specifically,the output of the entire string has the active power−angular frequency(ω-P)droop characteristic,and the decentralized control among strings can be autonomously guaranteed.Moreover,the secondary control is designed to realize multi-mode objectives,including on/off-grid mode switching,grid-connected power interactive management,and off-grid voltage quality regulation.As a result,the proposed method has the ability of plug-and-play capabilities,single-point failure redundancy,and seamless mode-switching.Experimental results are provided to verify the effectiveness of the proposed practical solution.
基金supported by the National Natural Science Foundation of China(62173002,62403235,62403010,52301408,62173255)the Beijing Natural Science Foundation(L241015,4222045)+2 种基金the Yuxiu Innovation Project of NCUT(2024NCUTYXCX111)the China Postdoctoral Science Foundation(2025T180466)the Beijing Postdoctoral Research Foundation(2025-ZZ-70)。
文摘Networked predictive control(NPC) has gained significant attention in recent years for its ability to effectively and actively address communication constraints in networked control systems(NCSs),such as network-induced delays,packet dropouts,and packet disorders.Despite significant advancements,the increasing complexity and dynamism of network environments,along with the growing complexity of systems,pose new challenges for NPC.These challenges include difficulties in system modeling,cyber attacks,component faults,limited network bandwidth,and the necessity for distributed collaboration.This survey aims to provide a comprehensive review of NPC strategies.It begins with a summary of the primary challenges faced by NCSs,followed by an introduction to the control structure and core concepts of NPC.The survey then discusses several typical NPC schemes and examines their extensions in the areas of secure control,fault-tolerant control,distributed coordinated control,and event-triggered control.Moreover,it reviews notable works that have implemented these schemes.Finally,the survey concludes by exploring typical applications of NPC schemes and highlighting several challenging issues that could guide future research efforts.
基金The National Key R&D Program of China(No.2022YFB3902902)the National Natural Science Foundation of China(No.52276003).
文摘Spaceborne optomechanical systems face the dual challenges of extreme thermal disturbances and millikelvin-level temperature control precision during orbital operations,demanding robust control strategies.To address the performance limitations of conventional fixed-parameter active disturbance rejection control(ADRC)under complex operating conditions,this work proposes a Qlearning-enhanced adaptive ADRC framework.A thermal-transfer model incorporating multisource disturbances(solar radiation,structural conduction,and contact thermal resistance)is established,coupled with a reinforcement learning-driven parameter optimization mechanism.The ε-greedy policy dynamically adjusts observer bandwidth(ω_(o)∈[0.01,0.2])and controller bandwidth(ω_(c)∈[0.01,0.1])to enable real-time estimation and compensation of total disturbances.Simulation results demonstrate significant improvements over fixed-parameter ADRC and a self-tuning internal model control proportional-integral(SIMC-PI)controller:31.3% and 15.4% reduction in settling time during setpoint responses,respectively;21.8% lower integral absolute error(IAE)than the fixed-parameter ADRC during setpoint step responses;12.7% and 52.5% enhancement in control precision over conventional fixed-parameter and SIMC-PI controllers,respectively,under±10 K periodic and step thermal disturbances.Monte Carlo robustness tests reveal smaller fluctuation ranges of IAE,settling time,and overshoot under±5% parameter perturbations.This methodology establishes a new paradigm for millikelvin-level thermal control in space optical payloads.
文摘In this paper,we define for the trace operator,the solution of certain models of vibrating plates standards with initial data in a strategic region spaces of weak regularities.Indeed,we know that the notion of regional controllability is more adapted to systems described by dynamic systems.Regional controllability results in a strategic area were established for vibrating plates by the Hilbertian Uniqueness Method.
基金supported by Youth Innovation Promotion Association of Chinese Academy of Sciences(No.2020261)Strategic Priority Research Program of Chinese Academy of Sciences(No.XDA02010000)the Young Potential Program of Shanghai Institute of Applied Physics,Chinese Academy of Sciences(No.SINAP-YXJH-202412).
文摘Molten salt reactors,being the only reactor type among Generation Ⅳ advanced nuclear reactors that utilize liquid fuels,offer inherent safety,high-temperature,and low-pressure operation,as well as the capability for online fuel reprocessing.However,the fuel-salt flow results in the decay of delayed neutron precursors(DNPs)outside the core,causing fluctuations in the effective delayed neutron fraction and consequently impacting the reactor reactivity.Particularly in accident scenarios—such as a combined pump shutdown and the inability to rapidly scram the reactor—the sole reliance on negative temperature feedback may cause a significant increase in core temperature,posing a threat to reactor safety.To address these problems,this paper introduces an innovative design for a passive fluid-driven suspended control rod(SCR)to dynamically compensate for reactivity fluctuations caused by DNPs flowing with the fuel.The control rod operates passively by leveraging the combined effects of gravity,buoyancy,and fluid dynamic forces,thereby eliminating the need for an external drive mechanism and enabling direct integration within the active region of the core.Using a 150 MWt thorium-based molten salt reactor as the reference design,we develop a mathematical model to systematically analyze the effects of key parameters—including the geometric dimensions and density of the SCR—on its performance.We examine its motion characteristics under different core flow conditions and assess its feasibility for the dynamic compensation of reactivity changes caused by fuel flow.The results of this study demonstrate that the SCR can effectively counteract reactivity fluctuations induced by fuel flow within molten salt reactors.A sensitivity analysis reveals that the SCR’s average density exerts a profound impact on its start-up flow threshold,channel flow rate,resistance to fuel density fluctuations,and response characteristics.This underscores the critical need to optimize this parameter.Moreover,by judiciously selecting the SCR’s length,number of deployed units,and the placement we can achieve the necessary reactivity control while maintaining a favorable balance between neutron economy and heat transfer performance.Ultimately,this paper provides an innovative solution for the passive reactivity control in molten salt reactors,offering significant potential for practical engineering applications.
基金supported by the National Natural Science Foundation of China(Grant No.12074187).
文摘Electrically controlled solid propellant(ECSP)offers multiple ignition and adjustable burning rate,serving as fuel for next-generation intelligent propulsion systems.To further enhance the combustion performance of ECSP,a method utilizing electrochemical and thermal decomposition catalysts has been proposed.In this work,we investigated the combustion characteristics of hydroxylamine nitrate(HAN)-based ECSP incorporating cerium oxide(CeO_(2))and graphene oxide(GO)by using an electrically controlled combustion test system.Electrochemical impedance spectroscopy(EIS)and linear sweep voltammetry(LSV)were used to measure the electrical conductibility and overpotential of ECSP with various additives,and Tafel curves were calculated.Thermogravimetric analysis coupled with differential scanning calorimetry(TG-DSC)was employed to investigate the thermal decomposition behavior of ECSP.While the addition of CeO_(2) and GO reduced the conductivity of ECSP,both catalysts exhibited strong electrocatalytic properties and facilitated the thermal decomposition of ECSP.Between two catalysts,GO demonstrated superior electrochemical catalytic performance but weaker thermal decomposition catalytic ability than CeO_(2).The addition of catalysts significantly enhanced the combustion performance of HAN-based ECSP.Specifically,the ignition delay time was shortened by 10%~20%.CeO_(2) raised the burning rate by approximately 20%but GO exhibited a remarkable boost of 40%in burning rate at high voltage.The combination of GO and PVA produced a flame-retardant substance that negatively impacted the ignition delay of ECSP and resulted in a smaller increase in the burning rate of ECSP at low ignition voltages.
