The photocatalytic degradation effects of carbofuran solution under concentration of 0.2,0.4,0.8 g/L Re3+-doped nano-TiO2 were studied.The highest degradation rate of 54.89% was obtained after 4 h degradation when the...The photocatalytic degradation effects of carbofuran solution under concentration of 0.2,0.4,0.8 g/L Re3+-doped nano-TiO2 were studied.The highest degradation rate of 54.89% was obtained after 4 h degradation when the concentration of nano-TiO2 was 0.4 g/L.Then field trials of photocatalytic degradation with suspension nano-TiO2 were conducted.The photocatalytic degradation effect of organic phosphorus and carbamate pesticides in tomato leaves and soil with different concentratio catalyst(0,0.2,0.4,0.6,0.8 g/L) were studied.The results showed that nano-TiO2 could significantly increase photocatalytic degradation rate of pesticide residues in tomato leaves and soil.Pesticide residues degradation rate could be increased by 20%-30% on the tomato leaves and 15%-20% in soil,and the best concentration of photocatalytic degradation was 0.2-0.4 g/L.展开更多
A carbon paste electrode (CPE) modified with ferrocene carboxylic acid (FcCA) and TiO2 nanoparticles was constructed by incorporating TiO2 nanoparticles and ferrocene carboxylic acid into the carbon paste matrix. The ...A carbon paste electrode (CPE) modified with ferrocene carboxylic acid (FcCA) and TiO2 nanoparticles was constructed by incorporating TiO2 nanoparticles and ferrocene carboxylic acid into the carbon paste matrix. The electrochemical behavior of captopril (CAP) at the surface of the modified electrode was investigated using electroanalytical methods. The modified electrode showed excellent electrocatalytic activity for the oxidation of CAP in aqueous solutions at physiological pH values. Cyclic voltammetric curves showed that the oxidation of CAP at the surface of the modified electrode reduced its overpotential by more than 290 mV. The modified electrode was used for detecting captopril using cyclic voltammetry and square wave voltammetry techniques. A calibration curve in the range of 0.03 to 2400 μmol/L was obtained that had a detection limit of 0.0096 μmol/L (3?) under the optimized conditions. The modified electrode was successfully used for the determination of captopril in pharmaceutical and biological samples.展开更多
Nano-TiO2 was employed for the separation and preconcentration of thallium.It was found that the adsorption ratio of thallium ions was more than 98% at pH 4.5 and the desorption ratio reached 99% under microwave irrad...Nano-TiO2 was employed for the separation and preconcentration of thallium.It was found that the adsorption ratio of thallium ions was more than 98% at pH 4.5 and the desorption ratio reached 99% under microwave irradiation for 3 min at 350 W.The adsorption equilibrium was well described by the Langmuir isotherm model with a maximum adsorption capacity of 4.09 mg/g[（20±0.1） °C].The nano-TiO2 was successfully applied to the determination of element thallium in the certified reference material polymetallic nodule and water samples.展开更多
The modification of the traditional interior wall paint was carried out by means of adding nano-TiO2 as a functional pigment. By regulating the dosage of dispersant, the nano-particles can be dispersed in paint homoge...The modification of the traditional interior wall paint was carried out by means of adding nano-TiO2 as a functional pigment. By regulating the dosage of dispersant, the nano-particles can be dispersed in paint homogeneously. With two aspects of experiments： dosage of nano-TiO2 and pigment volume concentration （PVC）, the paint formulation can be optimized and its properties~ such as hardness, scrub resistance, storage stability, contrast ratio and gloss can be improved. Finally an interior wall paint with high performance and air purification was prepared. Its character of formaldehyde degradation would be discussed in the next article.展开更多
The corrosion behavior of the 110S tube steel in the environments of high H2 S and CO2 content was inves- tigated by using a high-temperature and high-pressure autoclave, and the corrosion products were characterized ...The corrosion behavior of the 110S tube steel in the environments of high H2 S and CO2 content was inves- tigated by using a high-temperature and high-pressure autoclave, and the corrosion products were characterized by scanning electron microscopy and X ray diffraction technique. The results showed that all of the corrosion products under the test conditions mainly consisted of different types of iron sulfides such as pyrrhotite of Fe0.95 S, mackinaw- ite of FeS0.9, Fe0. 985 S and FeS, and the absence of iron carbonate in the corrosion scales indicated that the corrosion process was controlled by H2S corrosion. The corrosion rate of the 110S steel decreased firstly and then increased with the rising of temperature. The minimum corrosion rate occurred at 110 ℃. When the H2 S partial pressure PH2s below 9 MPa, the corrosion rate declined with the increase of PH2s. While over 9 MPa, a higher PH2s resulted in a faster corrosion process. With the increasing of the CO2 partial pressure, the corrosion rate had an increasing trend. The morphologies of the corrosion scales had a good accordance with the corrosion rates.展开更多
基金Project supported by the Elenventh Five-Year National Science and Technology Support Program (2006BAD6B03)National 863 Project (2006AA11Z4023)
文摘The photocatalytic degradation effects of carbofuran solution under concentration of 0.2,0.4,0.8 g/L Re3+-doped nano-TiO2 were studied.The highest degradation rate of 54.89% was obtained after 4 h degradation when the concentration of nano-TiO2 was 0.4 g/L.Then field trials of photocatalytic degradation with suspension nano-TiO2 were conducted.The photocatalytic degradation effect of organic phosphorus and carbamate pesticides in tomato leaves and soil with different concentratio catalyst(0,0.2,0.4,0.6,0.8 g/L) were studied.The results showed that nano-TiO2 could significantly increase photocatalytic degradation rate of pesticide residues in tomato leaves and soil.Pesticide residues degradation rate could be increased by 20%-30% on the tomato leaves and 15%-20% in soil,and the best concentration of photocatalytic degradation was 0.2-0.4 g/L.
文摘A carbon paste electrode (CPE) modified with ferrocene carboxylic acid (FcCA) and TiO2 nanoparticles was constructed by incorporating TiO2 nanoparticles and ferrocene carboxylic acid into the carbon paste matrix. The electrochemical behavior of captopril (CAP) at the surface of the modified electrode was investigated using electroanalytical methods. The modified electrode showed excellent electrocatalytic activity for the oxidation of CAP in aqueous solutions at physiological pH values. Cyclic voltammetric curves showed that the oxidation of CAP at the surface of the modified electrode reduced its overpotential by more than 290 mV. The modified electrode was used for detecting captopril using cyclic voltammetry and square wave voltammetry techniques. A calibration curve in the range of 0.03 to 2400 μmol/L was obtained that had a detection limit of 0.0096 μmol/L (3?) under the optimized conditions. The modified electrode was successfully used for the determination of captopril in pharmaceutical and biological samples.
基金Supported by the Excellent Talents Project(No.2009R30)Innovation Team Project(No.2007T053)of the Education Department of Liaoning Province,China
文摘Nano-TiO2 was employed for the separation and preconcentration of thallium.It was found that the adsorption ratio of thallium ions was more than 98% at pH 4.5 and the desorption ratio reached 99% under microwave irradiation for 3 min at 350 W.The adsorption equilibrium was well described by the Langmuir isotherm model with a maximum adsorption capacity of 4.09 mg/g[（20±0.1） °C].The nano-TiO2 was successfully applied to the determination of element thallium in the certified reference material polymetallic nodule and water samples.
基金Project supported by the Foundation of National Key Technologies Research and Development Program-Shanghai World Expo Special Project (Grant No.04DZ05803)
文摘The modification of the traditional interior wall paint was carried out by means of adding nano-TiO2 as a functional pigment. By regulating the dosage of dispersant, the nano-particles can be dispersed in paint homogeneously. With two aspects of experiments： dosage of nano-TiO2 and pigment volume concentration （PVC）, the paint formulation can be optimized and its properties~ such as hardness, scrub resistance, storage stability, contrast ratio and gloss can be improved. Finally an interior wall paint with high performance and air purification was prepared. Its character of formaldehyde degradation would be discussed in the next article.
基金Sponsored by Key National Science and Technology Specific Projects of China(2008ZX05017-002)
文摘The corrosion behavior of the 110S tube steel in the environments of high H2 S and CO2 content was inves- tigated by using a high-temperature and high-pressure autoclave, and the corrosion products were characterized by scanning electron microscopy and X ray diffraction technique. The results showed that all of the corrosion products under the test conditions mainly consisted of different types of iron sulfides such as pyrrhotite of Fe0.95 S, mackinaw- ite of FeS0.9, Fe0. 985 S and FeS, and the absence of iron carbonate in the corrosion scales indicated that the corrosion process was controlled by H2S corrosion. The corrosion rate of the 110S steel decreased firstly and then increased with the rising of temperature. The minimum corrosion rate occurred at 110 ℃. When the H2 S partial pressure PH2s below 9 MPa, the corrosion rate declined with the increase of PH2s. While over 9 MPa, a higher PH2s resulted in a faster corrosion process. With the increasing of the CO2 partial pressure, the corrosion rate had an increasing trend. The morphologies of the corrosion scales had a good accordance with the corrosion rates.
