An adaptive response compensation technique has been proposed to compensate for the response lag of the constant-current hot-wire anemometer (CCA) by taking advantage of digital signal processing technology. First, we...An adaptive response compensation technique has been proposed to compensate for the response lag of the constant-current hot-wire anemometer (CCA) by taking advantage of digital signal processing technology. First, we have developed a simple response compensation scheme based on a precise theoretical expression for the frequency response of the CCA (Kaifuku et al. 2010, 2011), and verified its effectiveness experimentally for hot-wires of 5 μm, 10 μm and 20 μm in diameter. Then, another novel technique based on a two-sensor probe technique—originally developed for the response compensation of fine-wire thermocouples (Tagawa and Ohta 1997;Tagawa et al. 1998)—has been proposed for estimating thermal time-constants of hot-wires to realize the in-situ response compensation of the CCA. To demonstrate the usefulness of the CCA, we have applied the response compensation schemes to multipoint velocity measure- ment of a turbulent wake flow formed behind a circular cylinder by using a CCA probe consisting of 16 hot-wires, which were driven simultaneously by a very simple constant-current circuit. As a result, the proposed response compensation techniques for the CCA work quite successfully and are capable of improving the response speed of the CCA to obtain reliable measurements comparable to those by the commercially-available constant-temperature hot-wire anemometer (CTA).展开更多
A thermionic gun is endowed with a long bunch tail,which presents challenges for the compact terahertz free electron laser(FEL)facility at the Huazhong University of Science and Technology.Owing to a large energy spre...A thermionic gun is endowed with a long bunch tail,which presents challenges for the compact terahertz free electron laser(FEL)facility at the Huazhong University of Science and Technology.Owing to a large energy spread,the tail particles do not contribute to the radiation.In the original design,an x-direction slit is used in the dispersive section of the transport line to remove the tail particles.This paper presents an improved scheme to remove the tail by introducing an RF beam chopper system at the exit of the electron gun,to prevent a significant number of tail particles from entering the linac.The facility remains compact while effectively removing the tail of the bunch.The parameters of the beam chopper system are designed.Bunch parameters and radiation performance are analyzed via a start-to-end simulation.The findings indicate that 43%of the particles can pass through the beam chopper system for subsequent acceleration and transport,which saves the RF power,reduces beam loss in the linac,reduces background noise,and suppresses the sideband instability.Simultaneously,the beam chopper system causes an increase in beam emittance,energy spread,and an offset in the center of the bunch.These effects can be mitigated by a solenoid,linac,and steering coils.The simulation results for the FEL show that the micro-pulse energy is greater than 1.1μJ in the frequency range of 2.8-9.7 THz,and the maximum micro-pulse energy is 1.28μJ.展开更多
针对应用于硼中子俘获治疗的加速器中子源的束流偏转问题,为其低能束流传输线部分设计了一套斩束器,通过理论计算与软件模拟,验证方案的可行性。为了解决斩波器电场强度不均匀问题,引入圆弧电极设计结构,微波工作室(CST Studio Suite)...针对应用于硼中子俘获治疗的加速器中子源的束流偏转问题,为其低能束流传输线部分设计了一套斩束器,通过理论计算与软件模拟,验证方案的可行性。为了解决斩波器电场强度不均匀问题,引入圆弧电极设计结构,微波工作室(CST Studio Suite)模拟仿真表明其具有更好的电场分布均匀性。发展了基于Python程序的CST与TraceWin联合束流动力学模拟,结果表明设计的斩波器能够高效率地实现束流偏转功能,设计方案具有良好的实际应用价值和意义。展开更多
A 16bit sigma-delta audio analog-to-digital converter is developed.It consists of an analog modulator and a digital decimator.A standard 2-order single-loop architecture is employed in the modulator.Chopper stabilizat...A 16bit sigma-delta audio analog-to-digital converter is developed.It consists of an analog modulator and a digital decimator.A standard 2-order single-loop architecture is employed in the modulator.Chopper stabilization is applied to the first integrator to eliminate the 1/f noise.A low-power,area-efficient decimator is used,which includes a poly-phase comb-filter and a wave-digital-filter.The converter achieves a 92dB dynamic range over the 96kHz audio band.This single chip occupies 2.68mm2 in a 0.18μm six-metal CMOS process and dissipates only 15.5mW power.展开更多
Rotor chopper control is a simple and effective drive method for induction motor. This paper presents a novel IGBT chopper topology,which can both adjust rotor resistance and protect IGBT efficiently. Investigation on...Rotor chopper control is a simple and effective drive method for induction motor. This paper presents a novel IGBT chopper topology,which can both adjust rotor resistance and protect IGBT efficiently. Investigation on the quasi transient state of the rotor rectifying circuit is made, and a nonlinear mapping between the equivalent resistance and the duty cycle is deduced. Furthermore, the method for determining the magnitude of the external resistor is introduced.展开更多
文摘An adaptive response compensation technique has been proposed to compensate for the response lag of the constant-current hot-wire anemometer (CCA) by taking advantage of digital signal processing technology. First, we have developed a simple response compensation scheme based on a precise theoretical expression for the frequency response of the CCA (Kaifuku et al. 2010, 2011), and verified its effectiveness experimentally for hot-wires of 5 μm, 10 μm and 20 μm in diameter. Then, another novel technique based on a two-sensor probe technique—originally developed for the response compensation of fine-wire thermocouples (Tagawa and Ohta 1997;Tagawa et al. 1998)—has been proposed for estimating thermal time-constants of hot-wires to realize the in-situ response compensation of the CCA. To demonstrate the usefulness of the CCA, we have applied the response compensation schemes to multipoint velocity measure- ment of a turbulent wake flow formed behind a circular cylinder by using a CCA probe consisting of 16 hot-wires, which were driven simultaneously by a very simple constant-current circuit. As a result, the proposed response compensation techniques for the CCA work quite successfully and are capable of improving the response speed of the CCA to obtain reliable measurements comparable to those by the commercially-available constant-temperature hot-wire anemometer (CTA).
基金supported by the National Natural Science Foundation of China(No.12175077).
文摘A thermionic gun is endowed with a long bunch tail,which presents challenges for the compact terahertz free electron laser(FEL)facility at the Huazhong University of Science and Technology.Owing to a large energy spread,the tail particles do not contribute to the radiation.In the original design,an x-direction slit is used in the dispersive section of the transport line to remove the tail particles.This paper presents an improved scheme to remove the tail by introducing an RF beam chopper system at the exit of the electron gun,to prevent a significant number of tail particles from entering the linac.The facility remains compact while effectively removing the tail of the bunch.The parameters of the beam chopper system are designed.Bunch parameters and radiation performance are analyzed via a start-to-end simulation.The findings indicate that 43%of the particles can pass through the beam chopper system for subsequent acceleration and transport,which saves the RF power,reduces beam loss in the linac,reduces background noise,and suppresses the sideband instability.Simultaneously,the beam chopper system causes an increase in beam emittance,energy spread,and an offset in the center of the bunch.These effects can be mitigated by a solenoid,linac,and steering coils.The simulation results for the FEL show that the micro-pulse energy is greater than 1.1μJ in the frequency range of 2.8-9.7 THz,and the maximum micro-pulse energy is 1.28μJ.
文摘针对应用于硼中子俘获治疗的加速器中子源的束流偏转问题,为其低能束流传输线部分设计了一套斩束器,通过理论计算与软件模拟,验证方案的可行性。为了解决斩波器电场强度不均匀问题,引入圆弧电极设计结构,微波工作室(CST Studio Suite)模拟仿真表明其具有更好的电场分布均匀性。发展了基于Python程序的CST与TraceWin联合束流动力学模拟,结果表明设计的斩波器能够高效率地实现束流偏转功能,设计方案具有良好的实际应用价值和意义。
文摘A 16bit sigma-delta audio analog-to-digital converter is developed.It consists of an analog modulator and a digital decimator.A standard 2-order single-loop architecture is employed in the modulator.Chopper stabilization is applied to the first integrator to eliminate the 1/f noise.A low-power,area-efficient decimator is used,which includes a poly-phase comb-filter and a wave-digital-filter.The converter achieves a 92dB dynamic range over the 96kHz audio band.This single chip occupies 2.68mm2 in a 0.18μm six-metal CMOS process and dissipates only 15.5mW power.
文摘Rotor chopper control is a simple and effective drive method for induction motor. This paper presents a novel IGBT chopper topology,which can both adjust rotor resistance and protect IGBT efficiently. Investigation on the quasi transient state of the rotor rectifying circuit is made, and a nonlinear mapping between the equivalent resistance and the duty cycle is deduced. Furthermore, the method for determining the magnitude of the external resistor is introduced.
