Owing to their good biocompatibility,polysaccharide hydrogels have broad application prospects in the field of flexible strain sensors.However,there are still significant challenges in the preparation of polysaccharid...Owing to their good biocompatibility,polysaccharide hydrogels have broad application prospects in the field of flexible strain sensors.However,there are still significant challenges in the preparation of polysaccharide hydrogels with good mechanical properties.MCA-Li Cl hydrogels were prepared by introducing methacrylated hyaluronic acid(Me HA)into the polymer network in the presence of acrylic acid(AA),acryloyloxyethyltrimethyl ammonium chloride(CATAC),and metal ions.The polymer network not only has a chemically cross-linked network and a tough network structure,but also benefits from a variety of supramolecular interactions,such as hydrogen bonding and coordination covalent bonding,resulting in excellent mechanical properties,with an elongation at break of 1390%,a tensile strength of up to 1200 k Pa,a toughness of 9.4546 MJ/m^(3),and adhesive properties towards various substrates.At the same time,the hydrogel has a high conductivity(5.33 mS/cm)and high strain-sensing sensitivity(Gauge factor=2.55).The flexible strain sensor assembled from the prepared MCA-Li Cl hydrogel can be used to detect human movements,from micro-expressions(smiles,swallowing)to pulse signals and other physiological activities,as well as large-scale joint movements(wrists,elbows,knees,fingers,etc.),realizing the real-time monitoring of full-scale human movements.The prepared hydrogels have potential applications in wearable devices,electronic skin,and strain-sensor components.展开更多
The development of intrinsically conductive piezoresistive sensors with high strain tolerance has garnered significant interest.While elastomeric polymers exhibit excellent strain capabilities,their utility in sensing...The development of intrinsically conductive piezoresistive sensors with high strain tolerance has garnered significant interest.While elastomeric polymers exhibit excellent strain capabilities,their utility in sensing applications has been limited by inherent challenges such as high electrical resistivity,poor aging resistance,and interfacial incompatibility.To address these limitations,hydroxyl-terminated polybutadiene(HTPB)-based polyurethane was chemically modified with acetylferrocene-polyaniline conductive moieties to enhance charge transport properties.Remarkably,this covalent functionalization endowed the resulting ferrocene-polyaniline hybrid polyurethane(FPHP)with a conductivity of2.33 n A at 1 V bias while preserving piezoresistive functionality.The FPHP demonstrated exceptional mechanical-electrical performance,achieving 254% elongation at break with strain-dependent gauge factors of 7.28(0%-12.5% strain,R^(2)=0.9504)and 19.66(12.5%-35.0% strain,R^(2)=0.9929).Further characterization revealed a rapid 0.60 s response time and stability over 3500 strain-release cycles at compression strain,underscoring its durability under repetitive loading.The FPHP sensor was capable of monitoring various human movements and recognizing writing signals.These advances establish a materials design paradigm for fabricating flexible sensors that synergistically integrate high deformability,tunable sensitivity,and robust operational stability,positioning FPHP as a promising candidate for next-generation wearable electronics and soft robotics.展开更多
Flexible and wearable sensors offer immense potential for rehabilitation medicine,but most rely solely on electrical signals,lacking real-time visual feedback and limiting trainee's interactivity.Inspired by the s...Flexible and wearable sensors offer immense potential for rehabilitation medicine,but most rely solely on electrical signals,lacking real-time visual feedback and limiting trainee's interactivity.Inspired by the structural coloration of Cyanocitta stelleri feathers,we developed a dual-mode sensor by utilizing black conductive polymer hydrogel(CPH)-enhanced structural color strategy.This sensor integrates a hydroxypropyl cellulose(HPC)-based structural color interface with a designed CPH sensing component.Highly visible light-absorbing CPH(absorption rate>88%)serves as the critical substrate for enhancing structural color performance.By absorbing incoherent scattered light and suppressing background interference,it significantly enhances the saturation of structural color,thereby achieving a high contrast index of 4.92.Unlike the faint and hardly visible structural colors on non-black substrates,the HPC on CPH displays vivid,highly perceptible colors and desirable mechanochromic behavior.Moreover,the CPH acts as a flexible sensing element,fortified by hydrogen and coordination bond networks,and exhibits exceptional electromechanical properties,including 867.1 kPa tensile strength,strain sensitivity(gauge factor of 4.24),and outstanding durability(over 4400 cycles).Compared to traditional single-mode sensors,the integrated sensor provides real-time visual and digital dual feedback,enhancing the accuracy and interactivity of rehabilitation assessments.This technology holds promise for advancing next-generation rehabilitation medicine.展开更多
Piezoelectric semiconductor(PSC)materials exhibit strong electromechanical coupling affected by free carriers,which makes their contact behavior essential for sensors,actuators,and electronic devices.Analytical models...Piezoelectric semiconductor(PSC)materials exhibit strong electromechanical coupling affected by free carriers,which makes their contact behavior essential for sensors,actuators,and electronic devices.Analytical models for three-dimensional(3D)PSC contact problems are still scarce,especially for conductive indenters.This work develops a semi-analytical framework to study the 3D frictionless contact between a conductive indenter and a PSC half-space.Fundamental solutions under a unit force and a unit electric charge are derived,and the corresponding frequency response functions are combined with a discrete convolution-fast Fourier transform(DC-FFT)algorithm to achieve an efficient semi-analytical contact model.The numerical results demonstrate that an increase in the surface charge density reduces the indentation pressure and modifies the electric potential distribution.A higher steady carrier concentration enhances the screening effect,suppresses the electromechanical coupling,and shifts the system response toward purely elastic behaviors.The sensitivity analysis shows that the indentation depth is dominated by the elastic constants,while the electric potential is mainly affected by the piezoelectric coefficient.Although the analysis is carried out with spherical indenters,the model is not limited to a specific indenter shape.It provides an effective tool for investigating complex 3D PSC contact problems and offers useful insights into the design of PSC materials-based devices.展开更多
Rechargeable Zn/Sn-air batteries have received considerable attention as promising energy storage devices.However,the electrochemical performance of these batteries is significantly constrained by the sluggish electro...Rechargeable Zn/Sn-air batteries have received considerable attention as promising energy storage devices.However,the electrochemical performance of these batteries is significantly constrained by the sluggish electrocatalytic reaction kinetics at the cathode.The integration of light energy into Zn/Sn-air batteries is a promising strategy for enhancing their performance.However,the photothermal and photoelectric effects generate heat in the battery under prolonged solar irradiation,leading to air cathode instability.This paper presents the first design and synthesis of Ni_(2)-1,5-diamino-4,8-dihydroxyanthraquinone(Ni_(2)DDA),an electronically conductiveπ-d conjugated metal-organic framework(MOF).Ni_(2)DDA exhibits both photoelectric and photothermal effects,with an optical band gap of~1.14 eV.Under illumination,Ni_(2)DDA achieves excellent oxygen evolution reaction performance(with an overpotential of 245 mV vs.reversible hydrogen electrode at 10 mA cm^(−2))and photothermal stability.These properties result from the synergy between the photoelectric and photothermal effects of Ni_(2)DDA.Upon integration into Zn/Sn-air batteries,Ni_(2)DDA ensures excellent cycling stability under light and exhibits remarkable performance in high-temperature environments up to 80℃.This study experimentally confirms the stable operation of photo-assisted Zn/Sn-air batteries under high-temperature conditions for the first time and provides novel insights into the application of electronically conductive MOFs in photoelectrocatalysis and photothermal catalysis.展开更多
Metal-organic frameworks(MOFs)have attracted significant interest as self-templates and precursors for the synthesis of carbon-based composites aimed at electromagnetic wave(EMW)absorption.However,the utilization of h...Metal-organic frameworks(MOFs)have attracted significant interest as self-templates and precursors for the synthesis of carbon-based composites aimed at electromagnetic wave(EMW)absorption.However,the utilization of high-temperature treatments has introduced uncertainties regarding the compositions and microstructures of resulting derivatives.Additionally,complete carbonization has led to diminished yields of the produced carbon composites,significantly limiting their practical applications.Consequently,the exploration of pristine MOF-based EMW absorbers presents an intriguing yet challenging endeavor,primarily due to inherently low electrical conductivity.In this study,we showcase the utilization of structurally robust Zr-MOFs as scaffolds to build highly conductive Zr-MOF/PPy composites via an inner-outer dual-modification approach,which involves the production of conducting polypyrrole(PPy)both within the confined nanoporous channels and the external surface of Zr-MOFs via post-synthetic modification.The interconnection of confined PPy and surface-lined PPy together leads to a consecutive and extensive conducting network to the maximum extent.This therefore entails outstanding conductivity up to~14.3 S cm^(-1) in Zr-MOF/PPy composites,which is approximately 1-2 orders of magnitude higher than that for conductive MOF nanocomposites constructed from either inner or outer modification.Benefiting from the strong and tunable conduction loss,as well as the induced dielectric polarization originated from the porous structures and MOF-polymer interfaces,Zr-MOF/PPy exhibits excellent microwave attenuation capabilities and a tunable absorption frequency range.Specifically,with only 15 wt.%loading,the minimum reflection loss(RLmin)can reach up to-67.4 dB,accompanied by an effective absorption bandwidth(EAB)extending to 6.74 GHz.Furthermore,the microwave absorption characteristics can be tailored from the C-band to the Ku-band by adjusting the loading of PPy.This work provides valuable insights into the fabrication of conductive MOF composites by presenting a straightforward pathway to enhance and reg-ulate electrical conduction in MOF-based nanocomposites,thus paving a way to facilely fabricate pristine MOF-based microwave absorbers.展开更多
With the continuous development of electronic devices and the information industry towards miniaturization,integration,and high-power consumption,the using of electronic devices will inevitably generate and accumulate...With the continuous development of electronic devices and the information industry towards miniaturization,integration,and high-power consumption,the using of electronic devices will inevitably generate and accumulate heat,which will cause local high temperatures and will seriously reduce their performance,reliability,and lifetime.Therefore,having efficient heat-conducting functional materials is crucial to the normal and stable operation of electrical equipment and microelectronic products.In view of the excellent comprehensive performance of polymer-based thermally conductive materials(including intrinsic polymers and filler-filled polymer-based composites),it has shown great advantages in thermal management applications.In this review,the research status of preparing polymer-based thermally conductive composites and effective strategies to improve their thermal conductivity(TC)are reviewed.Compared with the higher cost and technical support with adjusting the molecular chain structure and cross-linking mode to improve the intrinsic TC of the polymer,introducing suitable fillers into the polymer to build a thermally conductive network or oriented structure can simply and efficiently improve the overall TC.Typical applications of polymer-based composites were discussed with detailed examples in the field of electronic packaging.Challenges and possible solutions to solve the issues are discussed together with the perspectives.This study provides guidance for the future development of polymer-based thermally conductive composites.展开更多
Refractory wounds cause significant harm to the health of patients and the most common treatments in clinical practice are surgical debridement and wound dressings.However,certain challenges,including surgical difficu...Refractory wounds cause significant harm to the health of patients and the most common treatments in clinical practice are surgical debridement and wound dressings.However,certain challenges,including surgical difficulty,lengthy recovery times,and a high recurrence rate persist.Conductive hydrogel dressings with combined monitoring and therapeutic properties have strong advantages in promoting wound healing due to the stimulation of endogenous current on wounds and are the focus of recent advancements.Therefore,this review introduces the mechanism of conductive hydrogel used for wound monitoring and healing,the materials selection of conductive hydrogel dressings used for wound monitoring,focuses on the conductive hydrogel sensor to monitor the output categories of wound status signals,proving invaluable for non-invasive,real-time evaluation of wound condition to encourage wound healing.Notably,the research of artificial intelligence(AI)model based on sensor derived data to predict the wound healing state,AI makes use of this abundant data set to forecast and optimize the trajectory of tissue regeneration and assess the stage of wound healing.Finally,refractory wounds including pressure ulcers,diabetes ulcers and articular wounds,and the corresponding wound monitoring and healing process are discussed in detail.This manuscript supports the growth of clinically linked disciplines and offers motivation to researchers working in the multidisciplinary field of conductive hydrogel dressings.展开更多
Regulating lithium(Li)plating/stripping behavior in three-dimensional(3D)conductive scaffolds is critical to stabilizing Li metal batteries(LMBs).Surface protrusions and roughness in these scaffolds can induce uneven ...Regulating lithium(Li)plating/stripping behavior in three-dimensional(3D)conductive scaffolds is critical to stabilizing Li metal batteries(LMBs).Surface protrusions and roughness in these scaffolds can induce uneven distributions of the electric fields and ionic concentrations,forming“hot spots.”Hot spots may cause uncontrollable Li dendrites growth,presenting significant challenges to the cycle stability and safety of LMBs.To address these issues,we construct a Li ionic conductive-dielectric gradient bifunctional interlayer(ICDL)onto a 3D Li-injected graphene/carbon nanotube scaffold(LGCF)via in situ reaction of exfoliated hexagonal boron nitride(fhBN)and molten Li.Microscopic and spectroscopic analyses reveal that ICDL consists of fhBN-rich outer layer and inner layer enriched with Li_(3)N and Li-boron composites(Li-B).The outer layer utilizes dielectric properties to effectively homogenize the electric field,while the inner layer ensures high Li ion conductivity.Moreover,DFT calculations indicate that ICDL can effectively adsorb Li and decrease the Li diffusion barrier,promoting enhanced Li ion transport.The modulation of Li kinetics by ICDL increases the critical length of the Li nucleus,enabling suppression of Li dendrite growth.Attributing to these advantages,the ICDL-coated LGCF(ICDL@LGCF)demonstrates impressive long-term cycle performances in both symmetric cells and full cells.展开更多
Conductive polymer foam(CPF)with excellent compressibility and variable resistance has promising applications in electromagnetic interference(EMI)shielding and other integrated functions for wearable electronics.Howev...Conductive polymer foam(CPF)with excellent compressibility and variable resistance has promising applications in electromagnetic interference(EMI)shielding and other integrated functions for wearable electronics.However,its insufficient change amplitude of resistance with compressive strain generally leads to a degradation of shielding performance during deformation.Here,an innovative loading strategy of conductive materials on polymer foam is proposed to significantly increase the contact probability and contact area of conductive components under compression.Unique inter-skeleton conductive films are constructed by loading alginate-decorated magnetic liquid metal on the polymethacrylate films hanged between the foam skeleton(denoted as AMLM-PM foam).Traditional point contact between conductive skeletons under compression is upgraded to planar contact between conductive films.Therefore,the resistance change of AMLM-PM reaches four orders of magnitude under compression.Moreover,the inter-skeleton conductive films can improve the mechanical strength of foam,prevent the leakage of liquid metal and increase the scattering area of EM wave.AMLM-PM foam has strain-adaptive EMI shielding performance and shows compression-enhanced shielding effectiveness,solving the problem of traditional CPFs upon compression.The upgrade of resistance response also enables foam to achieve sensitive pressure sensing over a wide pressure range and compression-regulated Joule heating function.展开更多
The microstructure design for thermal conduction pathways in polymeric electrical encapsulation materials is essential to meet the stringent requirements for efficient thermal management and thermal runaway safety in ...The microstructure design for thermal conduction pathways in polymeric electrical encapsulation materials is essential to meet the stringent requirements for efficient thermal management and thermal runaway safety in modern electronic devices.Hence,a composite with three-dimensional network(Ho/U-BNNS/WPU)is developed by simultaneously incorporating magnetically modified boron nitride nanosheets(M@BNNS)and non-magnetic organo-grafted BNNS(U-BNNS)into waterborne polyurethane(WPU)to synchronous molding under a horizontal magnetic field.The results indicate that the continuous in-plane pathways formed by M@BNNS aligned along the magnetic field direction,combined with the bridging structure established by U-BNNS,enable Ho/U-BNNS/WPU to exhibit exceptional in-plane(λ//)and through-plane thermal conductivities(λ_(⊥)).In particular,with the addition of 30 wt%M@BNNS and 5 wt%U-BNNS,theλ//andλ_(⊥)of composites reach 11.47 and 2.88 W m^(-1) K^(-1),respectively,which representing a 194.2%improvement inλ_(⊥)compared to the composites with a single orientation of M@BNNS.Meanwhile,Ho/U-BNNS/WPU exhibits distinguished thermal management capabilities as thermal interface materials for LED and chips.The composites also demonstrate excellent flame retardancy,with a peak heat release and total heat release reduced by 58.9%and 36.9%,respectively,compared to WPU.Thus,this work offers new insights into the thermally conductive structural design and efficient flame-retardant systems of polymer composites,presenting broad application potential in electronic packaging fields.展开更多
A series of divinylphenyl-acryloyl chloride copolymers(PDVB-co-PACl)is synthesized via atom transfer radical polymerization employing tert-butyl acrylate and divinylbenzene as monomers.PDVB-co-PACl is utilized to graf...A series of divinylphenyl-acryloyl chloride copolymers(PDVB-co-PACl)is synthesized via atom transfer radical polymerization employing tert-butyl acrylate and divinylbenzene as monomers.PDVB-co-PACl is utilized to graft on the surface of spherical aluminum nitride(AlN)to prepare functionalized AlN(AlN@PDVB-co-PACl).Polymethylhydrosiloxane(PMHS)is then used as the matrix to prepare thermally conductive AlN@PDVB-co-PACl/PMHS composites with AlN@PDVB-co-PACl as fillers through blending and curing.The grafting of PDVB-co-PACl synchronously enhances the hydrolysis resistance of AlN and its interfacial compatibility with PMHS matrix.When the molecular weight of PDVB-co-PACl is 5100 g mol^(-1)and the grafting density is 0.8 wt%,the composites containing 75 wt%of AlN@PDVB-co-PACl exhibit the optimal comprehensive performance.The thermal conductivity(λ)of the composite is 1.14 W m^(-1)K^(-1),which enhances by 20%and 420%compared to theλof simply physically blended AlN/PMHS composite and pure PMHS,respectively.Meanwhile,AlN@PDVB-co-PACl/PMHS composites display remarkable hydrothermal aging resistance by retaining 99.1%of itsλafter soaking in 90°C deionized water for 80 h,whereas theλof the blended AlN/PMHS composites decreases sharply to 93.7%.展开更多
Purpose To investigate the perinatal risk factors for conductive hearing loss(CHL)in infancy and develop an initial prediction model to facilitate accurate diagnosis and early detection of CHL.Method This retrospectiv...Purpose To investigate the perinatal risk factors for conductive hearing loss(CHL)in infancy and develop an initial prediction model to facilitate accurate diagnosis and early detection of CHL.Method This retrospective study utilized data from the Newborn Cohort Study of Hearing Loss(ChiCTR2100049765).Infants who underwent diagnostic audiological assessments at our hospital between January 2003 and June 2024 were included.Data analysis was conducted using R(version 4.4.1)to construct an initial prediction model for CHL in infancy,applying the LASSO regression technique.Results A total of 661 infants(1322 ears)were included,with 1253 ears in the normal hearing group and 69 ears in the CHL group.Statistically significant differences were observed between the groups in the following factors:parent-reported infant response to sound,craniofacial deformities,neonatal hemolysis,jaundice treatment,and neonatal hypoglycemia.A multivariate prediction model and nomogram for CHL in infancy were developed and validated,achieving an accuracy of 92.5%and a specificity of 91.3%.Conclusions This study identified key risk factors for CHL in infancy and developed a preliminary predictive model,improving the diagnostic accuracy for CHL.Improved diagnostic precision can decrease misdiagnoses,reduce delays in treatment,and limit unnecessary antimicrobial prescriptions for infants.展开更多
Thermally conductive papers with electrical insulation and mechanical robustness are essential for efficient thermal management in modern electronics.In this study,we introduced a metal ion-assisted interfacial crossl...Thermally conductive papers with electrical insulation and mechanical robustness are essential for efficient thermal management in modern electronics.In this study,we introduced a metal ion-assisted interfacial crosslinking strategy to strengthen sugarfunctionalized graphene fluoride(SGF)and cellulose nanofibers(CNF)by hydrogen bonding and metal ion crosslinking that leads to simultaneous enhancements in thermal conductivity and mechanical properties.The facile sugarassisted ball-milling exfoliation method was developed to achieve the exfoliation of graphite fluoride and hydroxyl group functionalization on the surface of graphene fluoride.Thanks to the good dispersibility of the SGF sheets in water,the flexible SGF/CNF composite papers with hydrogen bonding were prepared via vacuum-assisted filtration.We introduced hydrogen bonding and metal ion crosslinking into SGF/CNF papers to obtain densely packed composite papers.Ca^(2+)or Al^(3+)ion-crosslinked SGF/CNF papers exhibited superior thermal and mechanical properties owing to hydrogen bonding and metal ion crosslinking.SGF/CNF-Ca^(2+)and SGF/CNF-Al^(3+)papers at 50 wt%of SGF yield in-plane thermal conductivities of 72.93 and 75.02 W m^(-1) K^(-1),and tensile strengths of 121.5 and 135.7 MPa,respectively.A thermal percolation value was observed at 12.6 vol%of SGF filler content.In addition,the SGF/CNF papers exhibited electrical insulation properties.These remarkable characteristics of the metal ion-crosslinked SGF/CNF papers are attributed to the densely packed structures caused by the strong interfacial interactions from hydrogen bonding as well as metal ion-crosslinking that could promote phonon transport.High-performance metal ion-crosslinked SGF/CNF papers with these fascinating advantages offer great potential for the thermal management of flexible electronics.展开更多
Lithium argyrodites with high ionic conductivity and low cost are considered as one of the most prospective solid electrolytes for all-solid-state lithium batteries.However,the poor chemical stability and compatibilit...Lithium argyrodites with high ionic conductivity and low cost are considered as one of the most prospective solid electrolytes for all-solid-state lithium batteries.However,the poor chemical stability and compatibility with lithium metal limit their application.Herein,Li_(5.4)PS_(4.4)Cl1.4I0.2solid electrolyte with high ionic conductivity of 11.49 m S ccm^(-1)and improved chemical stability is synthesized by iodine doping.An ultra-thin Li_(5.4)PS_(4.4)Cl_(1.4)I_(0.2)membrane with thickness of 10μm can be obtained by wet coating process,exhibiting a high ionic conductivity of 2.09 mS ccm^(-1)and low areal resistance of 1.17Ωcm^(-2).Moreover,iodine doping could in-situ form LiI at the lithium/electrolyte interface and improve the critical current density of Li_(5.4)PS_(4.4)Cl_(1.6)from 0.8 to 1.35 mA cm^(-2).The resultant LiCoO_(2)/Li_(5.4)PS_(4.4)Cl_(1.4)I_(0.2)/Li battery shows excellent cycling stability at 1 C,with a reversible specific capacity of 110.1 mA h g^(-1)and a retention of 80.5% after 1000 cycles.In addition,the assembled LiCoO_(2)/Li_(5.4)PS_(4.4)Cl_(1.4)I_(0.2)membrane/Li pouch cell delivers an initial discharge capacity of 110.4 mA h g^(-1)and 80.5% capacity retention after 100 cycles.展开更多
Carbon fibre,steel fibre and graphite were used as conductive fillers to prepare cementitious materials with excellent electrothermal properties.The electrically conductive cementitious materials with different volume...Carbon fibre,steel fibre and graphite were used as conductive fillers to prepare cementitious materials with excellent electrothermal properties.The electrically conductive cementitious materials with different volume dosages were analysed through compressive and flexural strength,electrochemical impedance spectroscopy and temperature rise tests.An equivalent circuit model was established to study the electrically conductive heat generation mechanism in the electrically conductive cementitious composites.The results indicate that the mechanical properties of cementitious composite materials with a ternary conductive phase are better than those of pristine cementitious materials because the fibrous filler improves their mechanical properties.However,the incorporation of graphite in the material reduces its strength.Introducing fibrous and point-like conductive phase materials into the cementitious material enhances the overall conductive pathway and considerably reduces the electrical resistance of the cementitious material,enhancing its conductive properties.The volume ratios of carbon fibre,steel fibre and graphite that achieve an optimal complex doping in the cementitious material were 0.35%,0.6%and 6%,respectively.This was determined using the mutation point of each circuit element parameter as the percolation threshold.In addition,at a certain safety voltage,there is a uniform change between the internal and surface temperatures of the conductive cementitious material,and the heating effect in this materialis is considerably better than that in the pristine cementitious material.展开更多
Despite the promising progress in conductive hydrogels made with pure conducting polymer,great challenges remain in the interface adhesion and robustness in longterm monitoring.To address these challenges,Prof.Seung H...Despite the promising progress in conductive hydrogels made with pure conducting polymer,great challenges remain in the interface adhesion and robustness in longterm monitoring.To address these challenges,Prof.Seung Hwan Ko and Taek-Soo Kim’s team introduced a laserinduced phase separation and adhesion method for fabricating conductive hydrogels consisting of pure poly(3,4-ethylenedioxythiophene):polystyrene sulfonate on polymer substrates.The laser-induced phase separation and adhesion treated conducting polymers can be selectively transformed into conductive hydrogels that exhibit wet conductivities of 101.4 S cm^(−1) with a spatial resolution down to 5μm.Moreover,they maintain impedance and charge-storage capacity even after 1 h of sonication.The micropatterned electrode arrays demonstrate their potential in long-term in vivo signal recordings,highlighting their promising role in the field of bioelectronics.展开更多
With the rapid development of wearable electronic skin technology, flexible strain sensors have shown great application prospects in the fields of human motion and physiological signal detection, medical diagnostics, ...With the rapid development of wearable electronic skin technology, flexible strain sensors have shown great application prospects in the fields of human motion and physiological signal detection, medical diagnostics, and human-computer interaction owing to their outstanding sensing performance. This paper reports a strain sensor with synergistic conductive network, consisting of stable carbon nanotube dispersion (CNT) layer and brittle MXene layer by dip-coating and electrostatic self-assembly method, and breathable three-dimensional (3D) flexible substrate of thermoplastic polyurethane (TPU) fibrous membrane prepared through electrospinning technology. The MXene/CNT@PDA-TPU (MC@p-TPU) flexible strain sensor had excellent air permeability, wide operating range (0–450 %), high sensitivity (Gauge Factor, GFmax = 8089.7), ultra-low detection limit (0.05 %), rapid response and recovery times (40 ms/60 ms), and excellent cycle stability and durability (10,000 cycles). Given its superior strain sensing capabilities, this sensor can be applied in physiological signals detection, human motion pattern recognition, and driving exoskeleton robots. In addition, MC@p-TPU fibrous membrane also exhibited excellent photothermal conversion performance and can be used as a wearable photo-heater, which has far-reaching application potential in the photothermal therapy of human joint diseases.展开更多
In the current transformative era of biomedicine,hydrogels have established their presence in biomaterials due to their superior biocompatibility,tuneability and resemblance with native tissue.However,hydrogels typica...In the current transformative era of biomedicine,hydrogels have established their presence in biomaterials due to their superior biocompatibility,tuneability and resemblance with native tissue.However,hydrogels typically exhibit poor conductivity due to their hydrophilic polymer structure.Electrical conductivity provides an important enhancement to the properties of hydrogel-based systems in various biomedical applications such as drug delivery and tissue engineering.Consequently,researchers are developing combinatorial strategies to develop electrically responsive“SMART”systems to improve the therapeutic efficacy of biomolecules.Electrically conductive hydrogels have been explored for various drug delivery applications,enabling higher loading of therapeutic cargo with on-demand delivery.This review emphasizes the properties,mechanisms,fabrication techniques and recent advancements of electrically responsive“SMART”systems aiding on-site drug delivery applications.Additionally,it covers prospects for the successful translation of these systems into clinical research.展开更多
Self-healing hydrogels utilize inherent intermolecular forces to autonomously heal physical damage resulting from excessive strain,pressure,or tearing.Applying these materials in soft robotics and tissue engineering c...Self-healing hydrogels utilize inherent intermolecular forces to autonomously heal physical damage resulting from excessive strain,pressure,or tearing.Applying these materials in soft robotics and tissue engineering could be beneficial.On the other hand,their efficacy in stretchable and mechanically resistant circuits is hindered by their limited electrical conductivity.展开更多
基金financially supported by the National Natural Science Foundation of China(No.22271074)Natural Science Foundation of Hebei Province(Nos.B2023208042,B2022208032,B2021208066,E2024208084,and E2024208088)+2 种基金Science Research Project of Hebei Education Department(No.JZX2024013)Special Fund for Local Scientific and Technological Development under the Guidance of the Central Government(No.236Z3704G)Hebei Province High Level Talent Funding(No.A202001010)。
文摘Owing to their good biocompatibility,polysaccharide hydrogels have broad application prospects in the field of flexible strain sensors.However,there are still significant challenges in the preparation of polysaccharide hydrogels with good mechanical properties.MCA-Li Cl hydrogels were prepared by introducing methacrylated hyaluronic acid(Me HA)into the polymer network in the presence of acrylic acid(AA),acryloyloxyethyltrimethyl ammonium chloride(CATAC),and metal ions.The polymer network not only has a chemically cross-linked network and a tough network structure,but also benefits from a variety of supramolecular interactions,such as hydrogen bonding and coordination covalent bonding,resulting in excellent mechanical properties,with an elongation at break of 1390%,a tensile strength of up to 1200 k Pa,a toughness of 9.4546 MJ/m^(3),and adhesive properties towards various substrates.At the same time,the hydrogel has a high conductivity(5.33 mS/cm)and high strain-sensing sensitivity(Gauge factor=2.55).The flexible strain sensor assembled from the prepared MCA-Li Cl hydrogel can be used to detect human movements,from micro-expressions(smiles,swallowing)to pulse signals and other physiological activities,as well as large-scale joint movements(wrists,elbows,knees,fingers,etc.),realizing the real-time monitoring of full-scale human movements.The prepared hydrogels have potential applications in wearable devices,electronic skin,and strain-sensor components.
文摘The development of intrinsically conductive piezoresistive sensors with high strain tolerance has garnered significant interest.While elastomeric polymers exhibit excellent strain capabilities,their utility in sensing applications has been limited by inherent challenges such as high electrical resistivity,poor aging resistance,and interfacial incompatibility.To address these limitations,hydroxyl-terminated polybutadiene(HTPB)-based polyurethane was chemically modified with acetylferrocene-polyaniline conductive moieties to enhance charge transport properties.Remarkably,this covalent functionalization endowed the resulting ferrocene-polyaniline hybrid polyurethane(FPHP)with a conductivity of2.33 n A at 1 V bias while preserving piezoresistive functionality.The FPHP demonstrated exceptional mechanical-electrical performance,achieving 254% elongation at break with strain-dependent gauge factors of 7.28(0%-12.5% strain,R^(2)=0.9504)and 19.66(12.5%-35.0% strain,R^(2)=0.9929).Further characterization revealed a rapid 0.60 s response time and stability over 3500 strain-release cycles at compression strain,underscoring its durability under repetitive loading.The FPHP sensor was capable of monitoring various human movements and recognizing writing signals.These advances establish a materials design paradigm for fabricating flexible sensors that synergistically integrate high deformability,tunable sensitivity,and robust operational stability,positioning FPHP as a promising candidate for next-generation wearable electronics and soft robotics.
基金supported by the Science and Technology Development Fund,Macao SAR(0065/2023/AFJ,0116/2022/A3)the National Natural Science Foundation of China(52402166)+4 种基金the Natural Science Foundation of Guangdong Province(2025A1515011120)the Australian Research Council(DE220100154)the financial support from the Science and Technology Development Fund(FDCT),Macao SAR(No.0149/2022/A),and(No.0046/2024/AFJ)Guangdong Science and Technology Department(2023QN10C305)for this workthe financial support from the National Natural Science Foundation of China(Grant No.22305185)。
文摘Flexible and wearable sensors offer immense potential for rehabilitation medicine,but most rely solely on electrical signals,lacking real-time visual feedback and limiting trainee's interactivity.Inspired by the structural coloration of Cyanocitta stelleri feathers,we developed a dual-mode sensor by utilizing black conductive polymer hydrogel(CPH)-enhanced structural color strategy.This sensor integrates a hydroxypropyl cellulose(HPC)-based structural color interface with a designed CPH sensing component.Highly visible light-absorbing CPH(absorption rate>88%)serves as the critical substrate for enhancing structural color performance.By absorbing incoherent scattered light and suppressing background interference,it significantly enhances the saturation of structural color,thereby achieving a high contrast index of 4.92.Unlike the faint and hardly visible structural colors on non-black substrates,the HPC on CPH displays vivid,highly perceptible colors and desirable mechanochromic behavior.Moreover,the CPH acts as a flexible sensing element,fortified by hydrogen and coordination bond networks,and exhibits exceptional electromechanical properties,including 867.1 kPa tensile strength,strain sensitivity(gauge factor of 4.24),and outstanding durability(over 4400 cycles).Compared to traditional single-mode sensors,the integrated sensor provides real-time visual and digital dual feedback,enhancing the accuracy and interactivity of rehabilitation assessments.This technology holds promise for advancing next-generation rehabilitation medicine.
基金Project supported by the National Natural Science Foundation of China(No.12402113)the Sichuan Science and Technology Program(No.2024NSFSC0037)。
文摘Piezoelectric semiconductor(PSC)materials exhibit strong electromechanical coupling affected by free carriers,which makes their contact behavior essential for sensors,actuators,and electronic devices.Analytical models for three-dimensional(3D)PSC contact problems are still scarce,especially for conductive indenters.This work develops a semi-analytical framework to study the 3D frictionless contact between a conductive indenter and a PSC half-space.Fundamental solutions under a unit force and a unit electric charge are derived,and the corresponding frequency response functions are combined with a discrete convolution-fast Fourier transform(DC-FFT)algorithm to achieve an efficient semi-analytical contact model.The numerical results demonstrate that an increase in the surface charge density reduces the indentation pressure and modifies the electric potential distribution.A higher steady carrier concentration enhances the screening effect,suppresses the electromechanical coupling,and shifts the system response toward purely elastic behaviors.The sensitivity analysis shows that the indentation depth is dominated by the elastic constants,while the electric potential is mainly affected by the piezoelectric coefficient.Although the analysis is carried out with spherical indenters,the model is not limited to a specific indenter shape.It provides an effective tool for investigating complex 3D PSC contact problems and offers useful insights into the design of PSC materials-based devices.
基金supported by the National Natural Science Foundation of China(No.62464010)Spring City Plan-Special Program for Young Talents(K202005007)+2 种基金Yunnan Talents Support Plan for Young Talents(XDYC-QNRC-2022-0482)Yunnan Local Colleges Applied Basic Research Projects(202101BA070001-138)Frontier Research Team of Kunming University 2023.
文摘Rechargeable Zn/Sn-air batteries have received considerable attention as promising energy storage devices.However,the electrochemical performance of these batteries is significantly constrained by the sluggish electrocatalytic reaction kinetics at the cathode.The integration of light energy into Zn/Sn-air batteries is a promising strategy for enhancing their performance.However,the photothermal and photoelectric effects generate heat in the battery under prolonged solar irradiation,leading to air cathode instability.This paper presents the first design and synthesis of Ni_(2)-1,5-diamino-4,8-dihydroxyanthraquinone(Ni_(2)DDA),an electronically conductiveπ-d conjugated metal-organic framework(MOF).Ni_(2)DDA exhibits both photoelectric and photothermal effects,with an optical band gap of~1.14 eV.Under illumination,Ni_(2)DDA achieves excellent oxygen evolution reaction performance(with an overpotential of 245 mV vs.reversible hydrogen electrode at 10 mA cm^(−2))and photothermal stability.These properties result from the synergy between the photoelectric and photothermal effects of Ni_(2)DDA.Upon integration into Zn/Sn-air batteries,Ni_(2)DDA ensures excellent cycling stability under light and exhibits remarkable performance in high-temperature environments up to 80℃.This study experimentally confirms the stable operation of photo-assisted Zn/Sn-air batteries under high-temperature conditions for the first time and provides novel insights into the application of electronically conductive MOFs in photoelectrocatalysis and photothermal catalysis.
基金supported by the Fundamental Research Funds for the Central Universities(Nos.2232023D-01 and 2232023D-07)the Shanghai Science&Technology Committee(No.22ZR1403300)the National Natural Science Foundation of China(No.52372040).
文摘Metal-organic frameworks(MOFs)have attracted significant interest as self-templates and precursors for the synthesis of carbon-based composites aimed at electromagnetic wave(EMW)absorption.However,the utilization of high-temperature treatments has introduced uncertainties regarding the compositions and microstructures of resulting derivatives.Additionally,complete carbonization has led to diminished yields of the produced carbon composites,significantly limiting their practical applications.Consequently,the exploration of pristine MOF-based EMW absorbers presents an intriguing yet challenging endeavor,primarily due to inherently low electrical conductivity.In this study,we showcase the utilization of structurally robust Zr-MOFs as scaffolds to build highly conductive Zr-MOF/PPy composites via an inner-outer dual-modification approach,which involves the production of conducting polypyrrole(PPy)both within the confined nanoporous channels and the external surface of Zr-MOFs via post-synthetic modification.The interconnection of confined PPy and surface-lined PPy together leads to a consecutive and extensive conducting network to the maximum extent.This therefore entails outstanding conductivity up to~14.3 S cm^(-1) in Zr-MOF/PPy composites,which is approximately 1-2 orders of magnitude higher than that for conductive MOF nanocomposites constructed from either inner or outer modification.Benefiting from the strong and tunable conduction loss,as well as the induced dielectric polarization originated from the porous structures and MOF-polymer interfaces,Zr-MOF/PPy exhibits excellent microwave attenuation capabilities and a tunable absorption frequency range.Specifically,with only 15 wt.%loading,the minimum reflection loss(RLmin)can reach up to-67.4 dB,accompanied by an effective absorption bandwidth(EAB)extending to 6.74 GHz.Furthermore,the microwave absorption characteristics can be tailored from the C-band to the Ku-band by adjusting the loading of PPy.This work provides valuable insights into the fabrication of conductive MOF composites by presenting a straightforward pathway to enhance and reg-ulate electrical conduction in MOF-based nanocomposites,thus paving a way to facilely fabricate pristine MOF-based microwave absorbers.
基金We acknowledge the Henan Young Backbone Teachers Foundation(No.2021GGJS135)。
文摘With the continuous development of electronic devices and the information industry towards miniaturization,integration,and high-power consumption,the using of electronic devices will inevitably generate and accumulate heat,which will cause local high temperatures and will seriously reduce their performance,reliability,and lifetime.Therefore,having efficient heat-conducting functional materials is crucial to the normal and stable operation of electrical equipment and microelectronic products.In view of the excellent comprehensive performance of polymer-based thermally conductive materials(including intrinsic polymers and filler-filled polymer-based composites),it has shown great advantages in thermal management applications.In this review,the research status of preparing polymer-based thermally conductive composites and effective strategies to improve their thermal conductivity(TC)are reviewed.Compared with the higher cost and technical support with adjusting the molecular chain structure and cross-linking mode to improve the intrinsic TC of the polymer,introducing suitable fillers into the polymer to build a thermally conductive network or oriented structure can simply and efficiently improve the overall TC.Typical applications of polymer-based composites were discussed with detailed examples in the field of electronic packaging.Challenges and possible solutions to solve the issues are discussed together with the perspectives.This study provides guidance for the future development of polymer-based thermally conductive composites.
基金supports received from Scientific Research Fund of Liaoning Province Education Department(Grant No.JYTQN 2023025)Scientific Research Fund of Liaoning Province Education Department(Grant No.JYTQN 2023025)+3 种基金the Natural Science Foundation of Liaoning Province(Grant No.2024-MS-075)the National Natural Science Foundation of China(32201179)National Key R&D Program of China(2023YFC2508200)Liaoning Provincial Natural Science Foundation Joint Fund(General Support Program Project)(2023-MSBA-093).
文摘Refractory wounds cause significant harm to the health of patients and the most common treatments in clinical practice are surgical debridement and wound dressings.However,certain challenges,including surgical difficulty,lengthy recovery times,and a high recurrence rate persist.Conductive hydrogel dressings with combined monitoring and therapeutic properties have strong advantages in promoting wound healing due to the stimulation of endogenous current on wounds and are the focus of recent advancements.Therefore,this review introduces the mechanism of conductive hydrogel used for wound monitoring and healing,the materials selection of conductive hydrogel dressings used for wound monitoring,focuses on the conductive hydrogel sensor to monitor the output categories of wound status signals,proving invaluable for non-invasive,real-time evaluation of wound condition to encourage wound healing.Notably,the research of artificial intelligence(AI)model based on sensor derived data to predict the wound healing state,AI makes use of this abundant data set to forecast and optimize the trajectory of tissue regeneration and assess the stage of wound healing.Finally,refractory wounds including pressure ulcers,diabetes ulcers and articular wounds,and the corresponding wound monitoring and healing process are discussed in detail.This manuscript supports the growth of clinically linked disciplines and offers motivation to researchers working in the multidisciplinary field of conductive hydrogel dressings.
基金the financial support from the Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (NRF-2023R1A2C2007699 and 2022R1A6A1A0306303912)the Nano Material Technology Development Program through the NRF funded by the Ministry of Science and ICT (NRF-2015M3A7B6027970)the Technology Innovation Program by the Ministry of Trade, Industry & Energy (RS-202300236794)
文摘Regulating lithium(Li)plating/stripping behavior in three-dimensional(3D)conductive scaffolds is critical to stabilizing Li metal batteries(LMBs).Surface protrusions and roughness in these scaffolds can induce uneven distributions of the electric fields and ionic concentrations,forming“hot spots.”Hot spots may cause uncontrollable Li dendrites growth,presenting significant challenges to the cycle stability and safety of LMBs.To address these issues,we construct a Li ionic conductive-dielectric gradient bifunctional interlayer(ICDL)onto a 3D Li-injected graphene/carbon nanotube scaffold(LGCF)via in situ reaction of exfoliated hexagonal boron nitride(fhBN)and molten Li.Microscopic and spectroscopic analyses reveal that ICDL consists of fhBN-rich outer layer and inner layer enriched with Li_(3)N and Li-boron composites(Li-B).The outer layer utilizes dielectric properties to effectively homogenize the electric field,while the inner layer ensures high Li ion conductivity.Moreover,DFT calculations indicate that ICDL can effectively adsorb Li and decrease the Li diffusion barrier,promoting enhanced Li ion transport.The modulation of Li kinetics by ICDL increases the critical length of the Li nucleus,enabling suppression of Li dendrite growth.Attributing to these advantages,the ICDL-coated LGCF(ICDL@LGCF)demonstrates impressive long-term cycle performances in both symmetric cells and full cells.
基金supported by National Key Research and Development Program of China(2021YBF3501304)National Natural Science Foundation of China(52222106,52371171,51971008,52121001)Natural Science Foundation of Beijing Municipality(2212033).
文摘Conductive polymer foam(CPF)with excellent compressibility and variable resistance has promising applications in electromagnetic interference(EMI)shielding and other integrated functions for wearable electronics.However,its insufficient change amplitude of resistance with compressive strain generally leads to a degradation of shielding performance during deformation.Here,an innovative loading strategy of conductive materials on polymer foam is proposed to significantly increase the contact probability and contact area of conductive components under compression.Unique inter-skeleton conductive films are constructed by loading alginate-decorated magnetic liquid metal on the polymethacrylate films hanged between the foam skeleton(denoted as AMLM-PM foam).Traditional point contact between conductive skeletons under compression is upgraded to planar contact between conductive films.Therefore,the resistance change of AMLM-PM reaches four orders of magnitude under compression.Moreover,the inter-skeleton conductive films can improve the mechanical strength of foam,prevent the leakage of liquid metal and increase the scattering area of EM wave.AMLM-PM foam has strain-adaptive EMI shielding performance and shows compression-enhanced shielding effectiveness,solving the problem of traditional CPFs upon compression.The upgrade of resistance response also enables foam to achieve sensitive pressure sensing over a wide pressure range and compression-regulated Joule heating function.
基金support from the National Natural Science Foundation of China(22268025,52473083,and 22475176)Key Research and Development Program of Yunnan Province(202403AP140036)+2 种基金Natural Science Basic Research Program of Shaanxi(2024JC-TBZC-04)Applied Basic Research Program of Yunnan Province(202201AT070115 and 202201BE070001-031)supported by the Innovation Capability Support Program of Shaanxi(2024RS-CXTD-57).
文摘The microstructure design for thermal conduction pathways in polymeric electrical encapsulation materials is essential to meet the stringent requirements for efficient thermal management and thermal runaway safety in modern electronic devices.Hence,a composite with three-dimensional network(Ho/U-BNNS/WPU)is developed by simultaneously incorporating magnetically modified boron nitride nanosheets(M@BNNS)and non-magnetic organo-grafted BNNS(U-BNNS)into waterborne polyurethane(WPU)to synchronous molding under a horizontal magnetic field.The results indicate that the continuous in-plane pathways formed by M@BNNS aligned along the magnetic field direction,combined with the bridging structure established by U-BNNS,enable Ho/U-BNNS/WPU to exhibit exceptional in-plane(λ//)and through-plane thermal conductivities(λ_(⊥)).In particular,with the addition of 30 wt%M@BNNS and 5 wt%U-BNNS,theλ//andλ_(⊥)of composites reach 11.47 and 2.88 W m^(-1) K^(-1),respectively,which representing a 194.2%improvement inλ_(⊥)compared to the composites with a single orientation of M@BNNS.Meanwhile,Ho/U-BNNS/WPU exhibits distinguished thermal management capabilities as thermal interface materials for LED and chips.The composites also demonstrate excellent flame retardancy,with a peak heat release and total heat release reduced by 58.9%and 36.9%,respectively,compared to WPU.Thus,this work offers new insights into the thermally conductive structural design and efficient flame-retardant systems of polymer composites,presenting broad application potential in electronic packaging fields.
基金support from the National Natural Science Foundation of China(52473083 and 52403112)the Technological Base Scientific Research Projects(Highly Thermal conductivity Nonmetal Materials),the Natural Science Basic Research Program of Shaanxi(2024JC-TBZC-04)+4 种基金the Shaanxi Province Key Research and Development Plan Project(2023-YBGY-461)the Innovation Capability Support Program of Shaanxi(2024RS-CXTD-57),the Natural Science Foundation of Chongqing,China(2023NSCQ-MSX2547)the Fundamental Research Funds for the Central Universities(D5000240077 and D5000240067)the Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University(CX2024094)the Analytical&Testing Center of Northwestern Polytechnical University for FT-IR,XRD and TEM tests performed in this work.
文摘A series of divinylphenyl-acryloyl chloride copolymers(PDVB-co-PACl)is synthesized via atom transfer radical polymerization employing tert-butyl acrylate and divinylbenzene as monomers.PDVB-co-PACl is utilized to graft on the surface of spherical aluminum nitride(AlN)to prepare functionalized AlN(AlN@PDVB-co-PACl).Polymethylhydrosiloxane(PMHS)is then used as the matrix to prepare thermally conductive AlN@PDVB-co-PACl/PMHS composites with AlN@PDVB-co-PACl as fillers through blending and curing.The grafting of PDVB-co-PACl synchronously enhances the hydrolysis resistance of AlN and its interfacial compatibility with PMHS matrix.When the molecular weight of PDVB-co-PACl is 5100 g mol^(-1)and the grafting density is 0.8 wt%,the composites containing 75 wt%of AlN@PDVB-co-PACl exhibit the optimal comprehensive performance.The thermal conductivity(λ)of the composite is 1.14 W m^(-1)K^(-1),which enhances by 20%and 420%compared to theλof simply physically blended AlN/PMHS composite and pure PMHS,respectively.Meanwhile,AlN@PDVB-co-PACl/PMHS composites display remarkable hydrothermal aging resistance by retaining 99.1%of itsλafter soaking in 90°C deionized water for 80 h,whereas theλof the blended AlN/PMHS composites decreases sharply to 93.7%.
基金supported by the grants of the National Key Research and Development Program of China(Grant No.2023YFC2508400)the National Natural Science Foundation of China(Grant No.82350005).
文摘Purpose To investigate the perinatal risk factors for conductive hearing loss(CHL)in infancy and develop an initial prediction model to facilitate accurate diagnosis and early detection of CHL.Method This retrospective study utilized data from the Newborn Cohort Study of Hearing Loss(ChiCTR2100049765).Infants who underwent diagnostic audiological assessments at our hospital between January 2003 and June 2024 were included.Data analysis was conducted using R(version 4.4.1)to construct an initial prediction model for CHL in infancy,applying the LASSO regression technique.Results A total of 661 infants(1322 ears)were included,with 1253 ears in the normal hearing group and 69 ears in the CHL group.Statistically significant differences were observed between the groups in the following factors:parent-reported infant response to sound,craniofacial deformities,neonatal hemolysis,jaundice treatment,and neonatal hypoglycemia.A multivariate prediction model and nomogram for CHL in infancy were developed and validated,achieving an accuracy of 92.5%and a specificity of 91.3%.Conclusions This study identified key risk factors for CHL in infancy and developed a preliminary predictive model,improving the diagnostic accuracy for CHL.Improved diagnostic precision can decrease misdiagnoses,reduce delays in treatment,and limit unnecessary antimicrobial prescriptions for infants.
基金supported by the Basic Science Program(No.2022R1A2C2009700)through the National Research Foundation of Korea(NRF)funded by the Ministry of Science and ICTthe Basic Science Research Capacity Enhancement Project(National Research Facilities and Equipment Center)through the Korea Ba-sic Science Institute funded by the Ministry of Education(No.2019R1A6C1010047)the Industrial Strategic Technology Development Program(No.20013248)through Korea Evaluation In-stitute of Industrial Technology funded by the Ministry of Trade,Industry&Energy(MOTIE,Korea).
文摘Thermally conductive papers with electrical insulation and mechanical robustness are essential for efficient thermal management in modern electronics.In this study,we introduced a metal ion-assisted interfacial crosslinking strategy to strengthen sugarfunctionalized graphene fluoride(SGF)and cellulose nanofibers(CNF)by hydrogen bonding and metal ion crosslinking that leads to simultaneous enhancements in thermal conductivity and mechanical properties.The facile sugarassisted ball-milling exfoliation method was developed to achieve the exfoliation of graphite fluoride and hydroxyl group functionalization on the surface of graphene fluoride.Thanks to the good dispersibility of the SGF sheets in water,the flexible SGF/CNF composite papers with hydrogen bonding were prepared via vacuum-assisted filtration.We introduced hydrogen bonding and metal ion crosslinking into SGF/CNF papers to obtain densely packed composite papers.Ca^(2+)or Al^(3+)ion-crosslinked SGF/CNF papers exhibited superior thermal and mechanical properties owing to hydrogen bonding and metal ion crosslinking.SGF/CNF-Ca^(2+)and SGF/CNF-Al^(3+)papers at 50 wt%of SGF yield in-plane thermal conductivities of 72.93 and 75.02 W m^(-1) K^(-1),and tensile strengths of 121.5 and 135.7 MPa,respectively.A thermal percolation value was observed at 12.6 vol%of SGF filler content.In addition,the SGF/CNF papers exhibited electrical insulation properties.These remarkable characteristics of the metal ion-crosslinked SGF/CNF papers are attributed to the densely packed structures caused by the strong interfacial interactions from hydrogen bonding as well as metal ion-crosslinking that could promote phonon transport.High-performance metal ion-crosslinked SGF/CNF papers with these fascinating advantages offer great potential for the thermal management of flexible electronics.
基金National Key R&D Program of China (grant no. 2022YFB3807700)National Natural Science Foundation of China (Grant No. U1964205, U21A2075, 52172253,52102326, 52250610214, 22309194, 52372244)+4 种基金Ningbo S&T Innovation 2025 Major Special Programme (Grant No.2019B10044, 2021Z122, 2023Z106)Zhejiang Provincial Key R&D Program of China (Grant No. 2022C01072, 2024C01095)Jiangsu Provincial S&T Innovation Special Programme for carbon peak and carbon neutrality (Grant No. BE2022007)Baima Lake Laboratory Joint Funds of the Zhejiang Provincial Natural Science Foundation of China (LBMHD24E020001)Youth Innovation Promotion Association CAS (Y2021080)。
文摘Lithium argyrodites with high ionic conductivity and low cost are considered as one of the most prospective solid electrolytes for all-solid-state lithium batteries.However,the poor chemical stability and compatibility with lithium metal limit their application.Herein,Li_(5.4)PS_(4.4)Cl1.4I0.2solid electrolyte with high ionic conductivity of 11.49 m S ccm^(-1)and improved chemical stability is synthesized by iodine doping.An ultra-thin Li_(5.4)PS_(4.4)Cl_(1.4)I_(0.2)membrane with thickness of 10μm can be obtained by wet coating process,exhibiting a high ionic conductivity of 2.09 mS ccm^(-1)and low areal resistance of 1.17Ωcm^(-2).Moreover,iodine doping could in-situ form LiI at the lithium/electrolyte interface and improve the critical current density of Li_(5.4)PS_(4.4)Cl_(1.6)from 0.8 to 1.35 mA cm^(-2).The resultant LiCoO_(2)/Li_(5.4)PS_(4.4)Cl_(1.4)I_(0.2)/Li battery shows excellent cycling stability at 1 C,with a reversible specific capacity of 110.1 mA h g^(-1)and a retention of 80.5% after 1000 cycles.In addition,the assembled LiCoO_(2)/Li_(5.4)PS_(4.4)Cl_(1.4)I_(0.2)membrane/Li pouch cell delivers an initial discharge capacity of 110.4 mA h g^(-1)and 80.5% capacity retention after 100 cycles.
基金Funded by the Key R&D Projects of Shanxi Province(No.201903D321113)the Shanxi Provincial Natural Science Foundation(No.202303021212359)the General Research Projects of Taiyuan University(No.23TYYB07)。
文摘Carbon fibre,steel fibre and graphite were used as conductive fillers to prepare cementitious materials with excellent electrothermal properties.The electrically conductive cementitious materials with different volume dosages were analysed through compressive and flexural strength,electrochemical impedance spectroscopy and temperature rise tests.An equivalent circuit model was established to study the electrically conductive heat generation mechanism in the electrically conductive cementitious composites.The results indicate that the mechanical properties of cementitious composite materials with a ternary conductive phase are better than those of pristine cementitious materials because the fibrous filler improves their mechanical properties.However,the incorporation of graphite in the material reduces its strength.Introducing fibrous and point-like conductive phase materials into the cementitious material enhances the overall conductive pathway and considerably reduces the electrical resistance of the cementitious material,enhancing its conductive properties.The volume ratios of carbon fibre,steel fibre and graphite that achieve an optimal complex doping in the cementitious material were 0.35%,0.6%and 6%,respectively.This was determined using the mutation point of each circuit element parameter as the percolation threshold.In addition,at a certain safety voltage,there is a uniform change between the internal and surface temperatures of the conductive cementitious material,and the heating effect in this materialis is considerably better than that in the pristine cementitious material.
基金supported by the National Natural Science Foundation of China(52475610)Zhejiang Provincial Natural Science Foundation of China(LDQ24E050001).
文摘Despite the promising progress in conductive hydrogels made with pure conducting polymer,great challenges remain in the interface adhesion and robustness in longterm monitoring.To address these challenges,Prof.Seung Hwan Ko and Taek-Soo Kim’s team introduced a laserinduced phase separation and adhesion method for fabricating conductive hydrogels consisting of pure poly(3,4-ethylenedioxythiophene):polystyrene sulfonate on polymer substrates.The laser-induced phase separation and adhesion treated conducting polymers can be selectively transformed into conductive hydrogels that exhibit wet conductivities of 101.4 S cm^(−1) with a spatial resolution down to 5μm.Moreover,they maintain impedance and charge-storage capacity even after 1 h of sonication.The micropatterned electrode arrays demonstrate their potential in long-term in vivo signal recordings,highlighting their promising role in the field of bioelectronics.
基金supported by the National Natural Science Foundation of China(Nos.52373093 and 12072325)the Outstanding Youth Fund of Henan Province(No.242300421062)+1 种基金National Key R&D Program of China(No.2019YFA0706802)the 111 project(No.D18023).
文摘With the rapid development of wearable electronic skin technology, flexible strain sensors have shown great application prospects in the fields of human motion and physiological signal detection, medical diagnostics, and human-computer interaction owing to their outstanding sensing performance. This paper reports a strain sensor with synergistic conductive network, consisting of stable carbon nanotube dispersion (CNT) layer and brittle MXene layer by dip-coating and electrostatic self-assembly method, and breathable three-dimensional (3D) flexible substrate of thermoplastic polyurethane (TPU) fibrous membrane prepared through electrospinning technology. The MXene/CNT@PDA-TPU (MC@p-TPU) flexible strain sensor had excellent air permeability, wide operating range (0–450 %), high sensitivity (Gauge Factor, GFmax = 8089.7), ultra-low detection limit (0.05 %), rapid response and recovery times (40 ms/60 ms), and excellent cycle stability and durability (10,000 cycles). Given its superior strain sensing capabilities, this sensor can be applied in physiological signals detection, human motion pattern recognition, and driving exoskeleton robots. In addition, MC@p-TPU fibrous membrane also exhibited excellent photothermal conversion performance and can be used as a wearable photo-heater, which has far-reaching application potential in the photothermal therapy of human joint diseases.
基金the Ministry of Human Resource and Development (MHRD) Government of India for funding
文摘In the current transformative era of biomedicine,hydrogels have established their presence in biomaterials due to their superior biocompatibility,tuneability and resemblance with native tissue.However,hydrogels typically exhibit poor conductivity due to their hydrophilic polymer structure.Electrical conductivity provides an important enhancement to the properties of hydrogel-based systems in various biomedical applications such as drug delivery and tissue engineering.Consequently,researchers are developing combinatorial strategies to develop electrically responsive“SMART”systems to improve the therapeutic efficacy of biomolecules.Electrically conductive hydrogels have been explored for various drug delivery applications,enabling higher loading of therapeutic cargo with on-demand delivery.This review emphasizes the properties,mechanisms,fabrication techniques and recent advancements of electrically responsive“SMART”systems aiding on-site drug delivery applications.Additionally,it covers prospects for the successful translation of these systems into clinical research.
文摘Self-healing hydrogels utilize inherent intermolecular forces to autonomously heal physical damage resulting from excessive strain,pressure,or tearing.Applying these materials in soft robotics and tissue engineering could be beneficial.On the other hand,their efficacy in stretchable and mechanically resistant circuits is hindered by their limited electrical conductivity.
