Guilin rice noodles, a unique cuisine from Guilin, Guangxi, is renowned both domestically and internationally as one of the top ten “Guilin Classics”. Utilizing a heat conduction model, this study explores the effec...Guilin rice noodles, a unique cuisine from Guilin, Guangxi, is renowned both domestically and internationally as one of the top ten “Guilin Classics”. Utilizing a heat conduction model, this study explores the effectiveness of the cooking process in sterilizing Guilin rice noodles before consumption. The model assumes that a large pot is filled with boiling water which is maintained at a constant high temperature heat resource through continuous gentle heating. And the room temperature is set as the initial temperature for the preheating process and the final temperature for the cooling process. The objective is to assess whether the cooking process achieves satisfactory sterilization results. The temperature distribution function of rice noodle with time is analytically obtained using the separation of variables method in the three-dimensional cylindrical coordinate system. Meanwhile, the thermal diffusion coefficient of Guilin rice noodles is obtained in terms of Riedel’ theory. By analyzing the elimination characteristics of Pseudomonas cocovenenans subsp. farinofermentans, this study obtains the optimal time required for effective sterilization at the core of Guilin rice noodles. The results show that the potential Pseudomonas cocovenenans subsp. farinofermentans will be completely eliminated through continuously preheating more than 31 seconds during the cooking process before consumption. This study provides a valuable reference of food safety standards in the cooking process of Guilin rice noodles, particularly in ensuring the complete inactivation of potentially harmful strains such as Pseudomonas cocovenenans subsp. farinofermentans.展开更多
We calculate the electrical and thermal conductivity of hydrogen for a wide range of densities and temperatures by using molecular dynamics simulations informed by density functional theory.On the basis of the corresp...We calculate the electrical and thermal conductivity of hydrogen for a wide range of densities and temperatures by using molecular dynamics simulations informed by density functional theory.On the basis of the corresponding extended ab initio data set,we construct interpolation formulas covering the range from low-density,high-temperature to high-density,low-temperature plasmas.Our conductivity model repro-duces the well-known limits of the Spitzer and Ziman theory.We compare with available experimental data andfind very good agreement.The new conductivity model can be applied,for example,in dynamo simulations for magneticfield generation in gas giant planets,brown dwarfs,and stellar envelopes.展开更多
To evaluate the thermal behavior of tunnels,an equivalent thermal conductivity(ETC)model for the fractured rock masses surrounding tunnels was proposed,based on the series-parallel theory,which incorporates the heat t...To evaluate the thermal behavior of tunnels,an equivalent thermal conductivity(ETC)model for the fractured rock masses surrounding tunnels was proposed,based on the series-parallel theory,which incorporates the heat transfer characteristics of the surrounding rock.A thermal probe test(TPT)was subsequently conducted at the Dajian Mountain Tunnel(China),and the heat transfer model of the thermal probe was developed and calibrated based on the TPT results.The ETCs of different test areas in the borehole were calculated based on the fracture parameters(dip direction,dip angle,opening,trace length),obtained via a digital borehole photography test.Finally,the new ETC model,the volumeaveraged model,and the non-fracture model were compared for accuracy in heat transfer calculation.The results demonstrate that(1)the error of heat transfer calculation error was reduced by 17.2%e69.2%using the new ETC model.(2)For the ETCs of different thermal response test areas,the minimum and maximum values were 2.15 W/(m K)and 3.7 W/(m K),respectively,with the fracture effect causing up to a 41.2%reduction in thermal conductivity.(3)For the ETC of the borehole,the ETC value was 2.53 W/(m K),with the fracture effect leading to a 31.6%reduction in thermal conductivity.The effect of fractures on the thermal conductivity of rock mass could not be ignored.This ETC model addresses the challenge of determining the ETC for the heterogeneous surrounding rock of tunnels and provides a more accurate representation of the in situ thermal behavior of tunnels.展开更多
The fractional single-phase-lagging(FSPL)heat conduction model is obtained by combining scalar time fractional conservation equation to the single-phase-lagging(SPL)heat conduction model.Based on the FSPL heat conduct...The fractional single-phase-lagging(FSPL)heat conduction model is obtained by combining scalar time fractional conservation equation to the single-phase-lagging(SPL)heat conduction model.Based on the FSPL heat conduction model,anomalous diffusion within a finite thin film is investigated.The effect of different parameters on solution has been observed and studied the asymptotic behavior of the FSPL model.The analytical solution is obtained using Laplace transform method.The whole analysis is presented in dimensionless form.Numerical examples of particular interest have been studied and discussed in details.展开更多
This paper presents a hybrid graded element model for the transient heat conduction problem in functionally graded materials （FGMs）. First, a Laplace transform approach is used to handle the time variable. Then, a f...This paper presents a hybrid graded element model for the transient heat conduction problem in functionally graded materials （FGMs）. First, a Laplace transform approach is used to handle the time variable. Then, a fundamental solution in Laplace space for FGMs is constructed. Next, a hybrid graded element is formulated based on the obtained fundamental solution and a frame field. As a result, the graded properties of FGMs are naturally reflected by using the fundamental solution to interpolate the intra-element field. Further, Stefest＇s algorithm is employed to convert the results in Laplace space back into the time-space domain. Finally, the performance of the proposed method is assessed by several benchmark examples. The results demonstrate well the efficiency and accuracy of the proposed method.展开更多
Cupressus sempervirens is a relevant species in the Mediterranean for its cultural,economic and landscape value.This species is threatened by Seiridium cardinale,the causal agent of the cypress canker disease(CCD).The...Cupressus sempervirens is a relevant species in the Mediterranean for its cultural,economic and landscape value.This species is threatened by Seiridium cardinale,the causal agent of the cypress canker disease(CCD).The effects of biotic stressors on O_(3)risk assessment are unknown and a comprehensive O_(3)risk assessment in C.sempervirens is missing.To fill these gaps,two clones of C.sempervirens,one resistant(Clone R)and one susceptible to CCD(Clone S),were subjected to three levels of O_(3)(Ambient Air-AA;1.5×AA;2.0×AA)for two consecutive years in an O_(3)-free-air controlled exposure facility and artificially inoculated with S.cardinale.Both the exposure-(AOT40)and flux-based(PODy)indices were tested.We found that PODy performed better than AOT40 to assess O_(3)effects on biomass and the critical level for a 4%biomass loss was 2.51 mmol/m^(2)POD2.However,significant O_(3)dose-response relationships were not found for the inoculated cypresses because the combination of middle level O_(3)(1.5×AA)and inoculation stimulated a biomass growth in Clone S as hormetic response.Moreover,we found a different inter-clonal response to both stressors with a statistically significant reduction of total and belowground biomass following O_(3),and lower root biomass in Clone S than in Clone R following pathogen infection.In summary,Clone R was more resistant to O_(3),and inoculation altered O_(3)risk via an hormetic effect on biomass.These results warrant further studies on how biotic stressors affect O_(3)responses and risk assessment.展开更多
Due to the limited hydration capacity,solidification/stabilization(S/S)with waste concrete powder(WCP)has a low strength.Carbonation can reduce carbon dioxide(CO_(2))emissions and improve strength of lead-contaminated...Due to the limited hydration capacity,solidification/stabilization(S/S)with waste concrete powder(WCP)has a low strength.Carbonation can reduce carbon dioxide(CO_(2))emissions and improve strength of lead-contaminated soil,but its mechanism and environmental behaviors are unclear.In light of this,a comprehensive study was conducted on the compressive strength,lead immobilization,conductivity characteristics,and carbonation mechanism of carbonated Pb-contaminated soils stabilized with WCP compared to calcining 600℃WCP.Results indicated that with carbonation,the compressive strength of the samples was significantly improved at the early stage(1 d),resulting in increased unconfined compressive strength(UCS)by 2.5-5.2 times due to the filling of pores by calcite.It negatively affected the lead immobilization capacity of highly doped(30%)samples,while this effect reversed after 3 d of carbonating due to the reduced alkaline environment.The lead immobilization capacity decreased after 28 d of carbonating due to the cracking of samples and the influence of a lower pH on the solubility of lead-carbonated hydroxide((PbCO_(3))_(2)Pb(OH)_(2)).The water evaporation(saturation<16.8%)led to dry shrinkage cracking and decreased UCS of the samples.Based on this finding,a conductivity model was developed for carbonated and cured samples,accurately predicting changes in saturation levels(R^(2)=0.98).A relationship between conductivity and UCS or lead immobilization capacity was proposed.This research proposed an innovative method for the reduction of CO_(2)emission as well as laid down a theoretical basis for the recovery of WCP and lead-contaminated soils through carbonation.展开更多
The maximum carboxylation rate of Rubisco(Vcmax)and maximum rate of electron transport(Jmax)for the biochemical photosynthetic model,and the slope(m)of the Ball-Berry stomatal conductance model influence gas exchange ...The maximum carboxylation rate of Rubisco(Vcmax)and maximum rate of electron transport(Jmax)for the biochemical photosynthetic model,and the slope(m)of the Ball-Berry stomatal conductance model influence gas exchange estimates between plants and the atmosphere.However,there is limited data on the variation of these three parameters for annual crops under different environmental conditions.Gas exchange measurements of light and CO2 response curves on leaves of winter wheat and spring wheat were conducted during the wheat growing season under different environmental conditions.There were no significant differences for Vcmax,Jmax or m between the two wheat types.The seasonal variation of Vcmax,Jmax and m for spring wheat was not pronounced,except a rapid decrease for Vcmax and Jmax at the end of growing season.Vcmax and Jmax show no significant changes during soil drying until light saturated stomatal conductance(gssat)was smaller than 0.15 mol m^–2 s^–1.Meanwhile,there was a significant difference in m during two different water supply conditions separated by gssat at 0.15 mol m^–2 s^–1.Furthermore,the misestimation of Vcmax and Jmax had great impacts on the net photosynthesis rate simulation,whereas,the underestimation of m resulted in underestimated stomatal conductance and transpiration rate and an overestimation of water use efficiency.Our work demonstrates that the impact of severe environmental conditions and specific growing stages on the variation of key model parameters should be taken into account for simulating gas exchange between plants and the atmosphere.Meanwhile,modification of m and Vcmax(and Jmax)successively based on water stress severity might be adopted to simulate gas exchange between plants and the atmosphere under drought.展开更多
The nano particles have demonstrated great potential to improve the heat transfer characteristics of heat transfer fluids.Possible parameters responsible for this increase were studied. The heat transfer profile in th...The nano particles have demonstrated great potential to improve the heat transfer characteristics of heat transfer fluids.Possible parameters responsible for this increase were studied. The heat transfer profile in the nanolayer region was combined with other parameters such as volume fraction, particle radius thermal conductivity of the fluid, particle and nanolayer, to formulate a thermal conductivity model. Results predicting the thermal conductivity of nanofluids using the model were compared with experimental results as well as studies by other researchers. The comparison of the results obtained for the Cu O/water and Ti O2/water nanofluids studied shows that the correlation proposed is in closest proximity in predicting the experimental results for the thermal conductivity of a nanofluid. Also, a parametric study was performed to understand how a number of factors affect the thermal conductivity of nanofluids using the developed correlation.展开更多
A new modified conductivity model was established to predict the shear yield stress of electrorheological fluids (ERF). By using a cell equivalent method, the present model can deal with the face-center square structu...A new modified conductivity model was established to predict the shear yield stress of electrorheological fluids (ERF). By using a cell equivalent method, the present model can deal with the face-center square structure of ERF. Combining the scheme of the classical conductivity model for the single-chain structure, a new formula for the prediction of the shear yield stress of ERF was set up. The influences of the separation distance of the particles, the volume fraction of the particles and the applied electric field on the shear yield stress were investigated.展开更多
With the increase in the coverage area of magnetotelluric data,three-dimensional magnetotelluric modeling in spherical coordinates and its differences with respect to traditional Cartesian modeling have gradually attr...With the increase in the coverage area of magnetotelluric data,three-dimensional magnetotelluric modeling in spherical coordinates and its differences with respect to traditional Cartesian modeling have gradually attracted attention.To fully understand the influence of the Earth’s curvature and map projection deformations on Cartesian modeling,qualitative and quantitative analyses based on realistic three-dimensional models need to be examined.Combined with five representative map projections,a type of model conversion method that transforms the original spherical electrical conductivity model to Cartesian coordinates is described in this study.The apparent resistivity differences between the spherical western United States electrical conductivity model and the corresponding five Cartesian models are then compared.The results show that the cylindrical equal distance map projection has the smallest error.A meridian convergence correction resulting from the deformation of the map projection is introduced to rotate the Cartesian impedance tensor from grid north to geographic north,which reduces differences from the spherical results.On the basis of the magnetotelluric field data,the applicability of the Cartesian coordinate system to western and contiguous United States models is quantitatively evaluated.Precise interpretations of the contiguous United States model were found to require spherical coordinates.展开更多
Method of VSC (Voltage Shorted Compaction)can be used to determine the intrinsic temperature dependence ofconductivity ofpolycrystalline compaction. The experimental conditions and technical key for preparation of VSC...Method of VSC (Voltage Shorted Compaction)can be used to determine the intrinsic temperature dependence ofconductivity ofpolycrystalline compaction. The experimental conditions and technical key for preparation of VSC device and its physical model as well as its applications in conducting polymers are discussed in detail.展开更多
The intensity distribution in Fresnel diffraction through a slit includes numerous small fluctuations referred to as ripples. These ripples make the modelling of the intensity distribution complicated. In this study, ...The intensity distribution in Fresnel diffraction through a slit includes numerous small fluctuations referred to as ripples. These ripples make the modelling of the intensity distribution complicated. In this study, we examine the characteristics of the Fresnel diffraction intensity distribution to deduce the rule for the peak position and then propose two types of quantum-mathematical models to obtain the distance between the edge and the peak point. The analysis and simulation indicate that the error in the models is below 0.50 μm. The models can also be used to detect the edges of a diffraction object, and we conduct several experiments to measure the slit width. The experimental results reveal that the repetition accuracy of the method can reach 0.23 μm.展开更多
By means of a stochastic model suggested in this paper for the systems with local non-equilibrium excited thermal fluctuations, the famous Shannon entropy is extended to include the heat conduction processes controlle...By means of a stochastic model suggested in this paper for the systems with local non-equilibrium excited thermal fluctuations, the famous Shannon entropy is extended to include the heat conduction processes controlled externally by boundary constraints of constant temperature gradients at two sides.Meanwhile,using the description of master equation for the continuous Markov processes a balance equation of stochastic entropy production valid for one dimension gaseous heat conduction systems with high values of Prandtl number has been also established.Based on it,a general expression for both the stochastic entropy production and the entropy production of fluctuations have been further deduced by theΩ-expansions.In this formalism,all kinds of stochastic contributions to the dissipation from the non-equilibrium thermal fluctuation and internal noise turn explicit.展开更多
The subchannel analysis method is one of the most crucial transient safety analysis methods in the thermal design of nuclear reactors.The nonuniformity of circumferential heat transfer is slight in conventional pressu...The subchannel analysis method is one of the most crucial transient safety analysis methods in the thermal design of nuclear reactors.The nonuniformity of circumferential heat transfer is slight in conventional pressurized water reactor(PWR)cores,but it is significant in advanced reactors with wire-wrapped or helical fuel rods.Predicting circumferentially nonuniform heat transfer behavior can be challenging owing to the complex geometry of helical fuel rods.In this study,a general circumferentially nonuniform heat transfer fuel rod(GCNF)model is developed to predict the fuel central temperature and circumferential heat flux and wall temperature.This model incorporates a refined two-dimensional fuel conduction model and circumferential nonuniform shape factor,addressing the dual factors contributing to the circumferential nonuniformity of helical fuel rods.An empirical correlation for the nonuniform shape factor is developed based on the computational fluid dynamics(CFD)results,and it is implemented to the subchannel code.The newly developed model is applied to a helical fuel annulus and validated by comparing the prediction results with CFD data.The maximum wall temperature predicted by the code is 1.15℃ lower than the value calculated through CFD.In terms of the heat flux,the maximum value at the inner corner is 22 kW lower than that obtained from the CFD prediction.The accurate prediction of circumferentially nonuniform heat transfer in helical fuel,concerning the surface heat flux and cladding temperature,addresses existing shortcomings in helical fuel subchannel analysis methods.Additionally,the capability to predict the fuel central temperature is essential for the safety analysis to determine whether fuel rods are melting.The generality of the model framework allows it to be used for the prediction of circumferential nonuniform heat transfer behavior in other types of fuel assemblies.展开更多
Considering phase changes associated with a high-temperature molten material cooled down from the outside,this work presents an improvement of the modelling and the numerical simulation of such processes for an applic...Considering phase changes associated with a high-temperature molten material cooled down from the outside,this work presents an improvement of the modelling and the numerical simulation of such processes for an application pertaining to the safety of light water nuclear reactors.Postulating a core meltdown accident,the behaviour of the core melt(aka corium)into a steel vessel is of tremendous importance when evaluating the vessel integrity.Evaluating correctly the heat fluxes requires the numerical simulation of the interaction between the liquid material and its solid counterpart which forms during the solidification process,but also may melt back.To simulate this configuration,encoun-tered in various industrial applications,one considers a bi-phase model constituted by a liquid phase in contact and interaction with its solid phase.The liquid phase may solidify in presence of low energetic source,while the solid phase may melt due to an intense heat flux from the high-temperature liquid.In the frame of the in-house legacy code,several simplifying assumptions(0D multi-layer discretization,instantaneous heat transfer via a quadratic temperature profile in solids)are made for the modelling of such phase changes.In the present work,these shortcomings are illustrated and further overcome by solving a 2D heat conduction model in the solid by a mixed Raviart-Thomas finite element method coupled to the liquid phase due to heat and mass exchanges through Stefan condition.The liquid phase is modeled with a 0D multi-layer approach.The 0D-liquid and 2D-solid mod-els are coupled by a Stefan like phase change interface model.Several sanity checks are performed to assess the validity of the approach on 1D and 2D academical configurations for which exact or reference solutions are available.Then more advanced situations(genu-ine multi-dimensional phase changes and an"industrial-like scenario")are simulated to verify the appropriate behavior of the obtained coupled simulation scheme.展开更多
Rapid development of energy,electrical and electronic technologies has put forward higher requirements for the thermal conductivities of polymers and their composites.However,the thermal conductivity coefficient(λ)va...Rapid development of energy,electrical and electronic technologies has put forward higher requirements for the thermal conductivities of polymers and their composites.However,the thermal conductivity coefficient(λ)values of prepared thermally conductive polymer composites are still difficult to achieve expectations,which has become the bottleneck in the fields of thermally conductive polymer composites.Aimed at that,based on the accumulation of the previous research works by related researchers and our research group,this paper proposes three possible directions for breaking through the bottlenecks:(1)preparing and synthesizing intrinsically thermally conductive polymers,(2)reducing the interfacial thermal resistance in thermally conductive polymer composites,and(3)establishing suitable thermal conduction models and studying inner thermal conduction mechanism to guide experimental optimization.Also,the future development trends of the three above-mentioned directions are foreseen,hoping to provide certain basis and guidance for the preparation,researches and development of thermally conductive polymers and their composites.展开更多
SnO2-glaze composites were prepared by Sb-doped SnO2 and SiO2-CaO-Al2O3-B2O3 glaze. The composites changed from an electrical insulator to a conductor as the SnO2 content increased from Owt% to 90 wt% . The complex im...SnO2-glaze composites were prepared by Sb-doped SnO2 and SiO2-CaO-Al2O3-B2O3 glaze. The composites changed from an electrical insulator to a conductor as the SnO2 content increased from Owt% to 90 wt% . The complex impedance spectra of the fabricated composites were investigated in the frequency range of 100Hz-40 MHz and three kinds of typical shape of complex impedance spectra were recorded and analyzed. The ,spectrum is quite close to the model of conduction via nonohmic contactiug when the SnO2 content is relatively low, In high loading region, the spectrum shows the conduction pattern through ohmic contact chains . In the moderate loading region, the model is a mixture of the above two models. Equivalent circuit of the composite changes from resistor-capacitor circuit to resistor-inductor circuit as the content of SnO2 increases.展开更多
The inclination angle of the flake particle has a significant impact on the in-plane thermal conductivity of composites.The graphite flake/Al composites(50 vol%)with different inclination angles were fabricated via fl...The inclination angle of the flake particle has a significant impact on the in-plane thermal conductivity of composites.The graphite flake/Al composites(50 vol%)with different inclination angles were fabricated via flake powder metallurgy,and the results show that with increasing the size of Al particle from 25.6 to 50.7μm,the inclination angle of graphite flake decreases from 7.3°to 4.4°,while the in-plane thermal conductivity of composites increases from 473 to 555 Wm-1 K-1.Based on the rules of mixture,an effective model was established to qualify and quantify the relation between the inclination angle and the in-plane thermal conductivity of the corresponding composites.This model can also be applied to other flake particle-reinforced composites.展开更多
Materials such as Koch AH-70,basalt aggregate,limestone powder and graphite particles were used to prepare conductive asphalt concrete,which is a new type of multifunctional concrete.The mix proportion by weight was s...Materials such as Koch AH-70,basalt aggregate,limestone powder and graphite particles were used to prepare conductive asphalt concrete,which is a new type of multifunctional concrete.The mix proportion by weight was shown as follows.Fine aggregates (2.36-4.75 mm)∶fine aggregates (<2.36mm)∶limestone powder∶asphalt=120∶240∶14∶30.The content of added graphite particles ranged from 0% to 20%(by the weight of asphalt concrete).A conductive asphalt concrete with a resistivity around 10-10 3Ω·m was obtained.Special attention was paid to the effects of graphite content,graphite physical-chemical properties,asphalt content and temperature on the resistivity.Furthermore,an attempt was made to develop an electrically conductive model for asphalt concrete.展开更多
文摘Guilin rice noodles, a unique cuisine from Guilin, Guangxi, is renowned both domestically and internationally as one of the top ten “Guilin Classics”. Utilizing a heat conduction model, this study explores the effectiveness of the cooking process in sterilizing Guilin rice noodles before consumption. The model assumes that a large pot is filled with boiling water which is maintained at a constant high temperature heat resource through continuous gentle heating. And the room temperature is set as the initial temperature for the preheating process and the final temperature for the cooling process. The objective is to assess whether the cooking process achieves satisfactory sterilization results. The temperature distribution function of rice noodle with time is analytically obtained using the separation of variables method in the three-dimensional cylindrical coordinate system. Meanwhile, the thermal diffusion coefficient of Guilin rice noodles is obtained in terms of Riedel’ theory. By analyzing the elimination characteristics of Pseudomonas cocovenenans subsp. farinofermentans, this study obtains the optimal time required for effective sterilization at the core of Guilin rice noodles. The results show that the potential Pseudomonas cocovenenans subsp. farinofermentans will be completely eliminated through continuously preheating more than 31 seconds during the cooking process before consumption. This study provides a valuable reference of food safety standards in the cooking process of Guilin rice noodles, particularly in ensuring the complete inactivation of potentially harmful strains such as Pseudomonas cocovenenans subsp. farinofermentans.
基金supported by the Priority Program SPP 1992 of the German Science Foundation(DFG)The Diversity of Exoplanets under project number 362460292.
文摘We calculate the electrical and thermal conductivity of hydrogen for a wide range of densities and temperatures by using molecular dynamics simulations informed by density functional theory.On the basis of the corresponding extended ab initio data set,we construct interpolation formulas covering the range from low-density,high-temperature to high-density,low-temperature plasmas.Our conductivity model repro-duces the well-known limits of the Spitzer and Ziman theory.We compare with available experimental data andfind very good agreement.The new conductivity model can be applied,for example,in dynamo simulations for magneticfield generation in gas giant planets,brown dwarfs,and stellar envelopes.
基金funded by the National Natural Science Foundation of China(Grant Nos.52278398 and U23A0664).
文摘To evaluate the thermal behavior of tunnels,an equivalent thermal conductivity(ETC)model for the fractured rock masses surrounding tunnels was proposed,based on the series-parallel theory,which incorporates the heat transfer characteristics of the surrounding rock.A thermal probe test(TPT)was subsequently conducted at the Dajian Mountain Tunnel(China),and the heat transfer model of the thermal probe was developed and calibrated based on the TPT results.The ETCs of different test areas in the borehole were calculated based on the fracture parameters(dip direction,dip angle,opening,trace length),obtained via a digital borehole photography test.Finally,the new ETC model,the volumeaveraged model,and the non-fracture model were compared for accuracy in heat transfer calculation.The results demonstrate that(1)the error of heat transfer calculation error was reduced by 17.2%e69.2%using the new ETC model.(2)For the ETCs of different thermal response test areas,the minimum and maximum values were 2.15 W/(m K)and 3.7 W/(m K),respectively,with the fracture effect causing up to a 41.2%reduction in thermal conductivity.(3)For the ETC of the borehole,the ETC value was 2.53 W/(m K),with the fracture effect leading to a 31.6%reduction in thermal conductivity.The effect of fractures on the thermal conductivity of rock mass could not be ignored.This ETC model addresses the challenge of determining the ETC for the heterogeneous surrounding rock of tunnels and provides a more accurate representation of the in situ thermal behavior of tunnels.
文摘The fractional single-phase-lagging(FSPL)heat conduction model is obtained by combining scalar time fractional conservation equation to the single-phase-lagging(SPL)heat conduction model.Based on the FSPL heat conduction model,anomalous diffusion within a finite thin film is investigated.The effect of different parameters on solution has been observed and studied the asymptotic behavior of the FSPL model.The analytical solution is obtained using Laplace transform method.The whole analysis is presented in dimensionless form.Numerical examples of particular interest have been studied and discussed in details.
文摘This paper presents a hybrid graded element model for the transient heat conduction problem in functionally graded materials （FGMs）. First, a Laplace transform approach is used to handle the time variable. Then, a fundamental solution in Laplace space for FGMs is constructed. Next, a hybrid graded element is formulated based on the obtained fundamental solution and a frame field. As a result, the graded properties of FGMs are naturally reflected by using the fundamental solution to interpolate the intra-element field. Further, Stefest＇s algorithm is employed to convert the results in Laplace space back into the time-space domain. Finally, the performance of the proposed method is assessed by several benchmark examples. The results demonstrate well the efficiency and accuracy of the proposed method.
基金supported by the Italian Integrated Environmental Research Infrastructures Systems(ITINERIS)(Nos.IR0000032 and CUP B53C22002150006).
文摘Cupressus sempervirens is a relevant species in the Mediterranean for its cultural,economic and landscape value.This species is threatened by Seiridium cardinale,the causal agent of the cypress canker disease(CCD).The effects of biotic stressors on O_(3)risk assessment are unknown and a comprehensive O_(3)risk assessment in C.sempervirens is missing.To fill these gaps,two clones of C.sempervirens,one resistant(Clone R)and one susceptible to CCD(Clone S),were subjected to three levels of O_(3)(Ambient Air-AA;1.5×AA;2.0×AA)for two consecutive years in an O_(3)-free-air controlled exposure facility and artificially inoculated with S.cardinale.Both the exposure-(AOT40)and flux-based(PODy)indices were tested.We found that PODy performed better than AOT40 to assess O_(3)effects on biomass and the critical level for a 4%biomass loss was 2.51 mmol/m^(2)POD2.However,significant O_(3)dose-response relationships were not found for the inoculated cypresses because the combination of middle level O_(3)(1.5×AA)and inoculation stimulated a biomass growth in Clone S as hormetic response.Moreover,we found a different inter-clonal response to both stressors with a statistically significant reduction of total and belowground biomass following O_(3),and lower root biomass in Clone S than in Clone R following pathogen infection.In summary,Clone R was more resistant to O_(3),and inoculation altered O_(3)risk via an hormetic effect on biomass.These results warrant further studies on how biotic stressors affect O_(3)responses and risk assessment.
基金the National Natural Science Foundation of China(Grant Nos.42177163 and 42071080)the China Postdoctoral Science Foundation(Grant No.2022M723347).
文摘Due to the limited hydration capacity,solidification/stabilization(S/S)with waste concrete powder(WCP)has a low strength.Carbonation can reduce carbon dioxide(CO_(2))emissions and improve strength of lead-contaminated soil,but its mechanism and environmental behaviors are unclear.In light of this,a comprehensive study was conducted on the compressive strength,lead immobilization,conductivity characteristics,and carbonation mechanism of carbonated Pb-contaminated soils stabilized with WCP compared to calcining 600℃WCP.Results indicated that with carbonation,the compressive strength of the samples was significantly improved at the early stage(1 d),resulting in increased unconfined compressive strength(UCS)by 2.5-5.2 times due to the filling of pores by calcite.It negatively affected the lead immobilization capacity of highly doped(30%)samples,while this effect reversed after 3 d of carbonating due to the reduced alkaline environment.The lead immobilization capacity decreased after 28 d of carbonating due to the cracking of samples and the influence of a lower pH on the solubility of lead-carbonated hydroxide((PbCO_(3))_(2)Pb(OH)_(2)).The water evaporation(saturation<16.8%)led to dry shrinkage cracking and decreased UCS of the samples.Based on this finding,a conductivity model was developed for carbonated and cured samples,accurately predicting changes in saturation levels(R^(2)=0.98).A relationship between conductivity and UCS or lead immobilization capacity was proposed.This research proposed an innovative method for the reduction of CO_(2)emission as well as laid down a theoretical basis for the recovery of WCP and lead-contaminated soils through carbonation.
基金This research was jointly supported by the National Natural Science Foundation of China(41375019,41730645,and 41275118)the China Special Fund for Meteorological Research in the Public Interest(Major projects)(GYHY201506001-2).
文摘The maximum carboxylation rate of Rubisco(Vcmax)and maximum rate of electron transport(Jmax)for the biochemical photosynthetic model,and the slope(m)of the Ball-Berry stomatal conductance model influence gas exchange estimates between plants and the atmosphere.However,there is limited data on the variation of these three parameters for annual crops under different environmental conditions.Gas exchange measurements of light and CO2 response curves on leaves of winter wheat and spring wheat were conducted during the wheat growing season under different environmental conditions.There were no significant differences for Vcmax,Jmax or m between the two wheat types.The seasonal variation of Vcmax,Jmax and m for spring wheat was not pronounced,except a rapid decrease for Vcmax and Jmax at the end of growing season.Vcmax and Jmax show no significant changes during soil drying until light saturated stomatal conductance(gssat)was smaller than 0.15 mol m^–2 s^–1.Meanwhile,there was a significant difference in m during two different water supply conditions separated by gssat at 0.15 mol m^–2 s^–1.Furthermore,the misestimation of Vcmax and Jmax had great impacts on the net photosynthesis rate simulation,whereas,the underestimation of m resulted in underestimated stomatal conductance and transpiration rate and an overestimation of water use efficiency.Our work demonstrates that the impact of severe environmental conditions and specific growing stages on the variation of key model parameters should be taken into account for simulating gas exchange between plants and the atmosphere.Meanwhile,modification of m and Vcmax(and Jmax)successively based on water stress severity might be adopted to simulate gas exchange between plants and the atmosphere under drought.
文摘The nano particles have demonstrated great potential to improve the heat transfer characteristics of heat transfer fluids.Possible parameters responsible for this increase were studied. The heat transfer profile in the nanolayer region was combined with other parameters such as volume fraction, particle radius thermal conductivity of the fluid, particle and nanolayer, to formulate a thermal conductivity model. Results predicting the thermal conductivity of nanofluids using the model were compared with experimental results as well as studies by other researchers. The comparison of the results obtained for the Cu O/water and Ti O2/water nanofluids studied shows that the correlation proposed is in closest proximity in predicting the experimental results for the thermal conductivity of a nanofluid. Also, a parametric study was performed to understand how a number of factors affect the thermal conductivity of nanofluids using the developed correlation.
文摘A new modified conductivity model was established to predict the shear yield stress of electrorheological fluids (ERF). By using a cell equivalent method, the present model can deal with the face-center square structure of ERF. Combining the scheme of the classical conductivity model for the single-chain structure, a new formula for the prediction of the shear yield stress of ERF was set up. The influences of the separation distance of the particles, the volume fraction of the particles and the applied electric field on the shear yield stress were investigated.
基金the National Natural Science Foundation of China(Nos.42220104002,42104073,and 41630317).
文摘With the increase in the coverage area of magnetotelluric data,three-dimensional magnetotelluric modeling in spherical coordinates and its differences with respect to traditional Cartesian modeling have gradually attracted attention.To fully understand the influence of the Earth’s curvature and map projection deformations on Cartesian modeling,qualitative and quantitative analyses based on realistic three-dimensional models need to be examined.Combined with five representative map projections,a type of model conversion method that transforms the original spherical electrical conductivity model to Cartesian coordinates is described in this study.The apparent resistivity differences between the spherical western United States electrical conductivity model and the corresponding five Cartesian models are then compared.The results show that the cylindrical equal distance map projection has the smallest error.A meridian convergence correction resulting from the deformation of the map projection is introduced to rotate the Cartesian impedance tensor from grid north to geographic north,which reduces differences from the spherical results.On the basis of the magnetotelluric field data,the applicability of the Cartesian coordinate system to western and contiguous United States models is quantitatively evaluated.Precise interpretations of the contiguous United States model were found to require spherical coordinates.
文摘Method of VSC (Voltage Shorted Compaction)can be used to determine the intrinsic temperature dependence ofconductivity ofpolycrystalline compaction. The experimental conditions and technical key for preparation of VSC device and its physical model as well as its applications in conducting polymers are discussed in detail.
基金Project supported by the National Natural Science Foundation of China(Grant No.61475018)
文摘The intensity distribution in Fresnel diffraction through a slit includes numerous small fluctuations referred to as ripples. These ripples make the modelling of the intensity distribution complicated. In this study, we examine the characteristics of the Fresnel diffraction intensity distribution to deduce the rule for the peak position and then propose two types of quantum-mathematical models to obtain the distance between the edge and the peak point. The analysis and simulation indicate that the error in the models is below 0.50 μm. The models can also be used to detect the edges of a diffraction object, and we conduct several experiments to measure the slit width. The experimental results reveal that the repetition accuracy of the method can reach 0.23 μm.
文摘By means of a stochastic model suggested in this paper for the systems with local non-equilibrium excited thermal fluctuations, the famous Shannon entropy is extended to include the heat conduction processes controlled externally by boundary constraints of constant temperature gradients at two sides.Meanwhile,using the description of master equation for the continuous Markov processes a balance equation of stochastic entropy production valid for one dimension gaseous heat conduction systems with high values of Prandtl number has been also established.Based on it,a general expression for both the stochastic entropy production and the entropy production of fluctuations have been further deduced by theΩ-expansions.In this formalism,all kinds of stochastic contributions to the dissipation from the non-equilibrium thermal fluctuation and internal noise turn explicit.
基金supported by the National Natural Science Foundation of China(Grant Nos.12075150,12322510,12135008)the Shanghai Rising-Star Program(Grant No.22QA1404500).
文摘The subchannel analysis method is one of the most crucial transient safety analysis methods in the thermal design of nuclear reactors.The nonuniformity of circumferential heat transfer is slight in conventional pressurized water reactor(PWR)cores,but it is significant in advanced reactors with wire-wrapped or helical fuel rods.Predicting circumferentially nonuniform heat transfer behavior can be challenging owing to the complex geometry of helical fuel rods.In this study,a general circumferentially nonuniform heat transfer fuel rod(GCNF)model is developed to predict the fuel central temperature and circumferential heat flux and wall temperature.This model incorporates a refined two-dimensional fuel conduction model and circumferential nonuniform shape factor,addressing the dual factors contributing to the circumferential nonuniformity of helical fuel rods.An empirical correlation for the nonuniform shape factor is developed based on the computational fluid dynamics(CFD)results,and it is implemented to the subchannel code.The newly developed model is applied to a helical fuel annulus and validated by comparing the prediction results with CFD data.The maximum wall temperature predicted by the code is 1.15℃ lower than the value calculated through CFD.In terms of the heat flux,the maximum value at the inner corner is 22 kW lower than that obtained from the CFD prediction.The accurate prediction of circumferentially nonuniform heat transfer in helical fuel,concerning the surface heat flux and cladding temperature,addresses existing shortcomings in helical fuel subchannel analysis methods.Additionally,the capability to predict the fuel central temperature is essential for the safety analysis to determine whether fuel rods are melting.The generality of the model framework allows it to be used for the prediction of circumferential nonuniform heat transfer behavior in other types of fuel assemblies.
基金funded by CEA,EDF and Framatomefinancial and scientific support of CEA Cadarache.
文摘Considering phase changes associated with a high-temperature molten material cooled down from the outside,this work presents an improvement of the modelling and the numerical simulation of such processes for an application pertaining to the safety of light water nuclear reactors.Postulating a core meltdown accident,the behaviour of the core melt(aka corium)into a steel vessel is of tremendous importance when evaluating the vessel integrity.Evaluating correctly the heat fluxes requires the numerical simulation of the interaction between the liquid material and its solid counterpart which forms during the solidification process,but also may melt back.To simulate this configuration,encoun-tered in various industrial applications,one considers a bi-phase model constituted by a liquid phase in contact and interaction with its solid phase.The liquid phase may solidify in presence of low energetic source,while the solid phase may melt due to an intense heat flux from the high-temperature liquid.In the frame of the in-house legacy code,several simplifying assumptions(0D multi-layer discretization,instantaneous heat transfer via a quadratic temperature profile in solids)are made for the modelling of such phase changes.In the present work,these shortcomings are illustrated and further overcome by solving a 2D heat conduction model in the solid by a mixed Raviart-Thomas finite element method coupled to the liquid phase due to heat and mass exchanges through Stefan condition.The liquid phase is modeled with a 0D multi-layer approach.The 0D-liquid and 2D-solid mod-els are coupled by a Stefan like phase change interface model.Several sanity checks are performed to assess the validity of the approach on 1D and 2D academical configurations for which exact or reference solutions are available.Then more advanced situations(genu-ine multi-dimensional phase changes and an"industrial-like scenario")are simulated to verify the appropriate behavior of the obtained coupled simulation scheme.
基金National Natural Science Foundation of China(51773169 and 51973173)Guangdong Basic and Applied Basic Research Foundation(2019B1515120093)+2 种基金Technological Base Scientific Research ProjectsNatural Science Basic Research Plan for Distinguished Young Scholars in Shaanxi Province(2019JC-11)Polymer Electromagnetic Functional Materials Innovation Team of Shaanxi Sanqin Scholars.
文摘Rapid development of energy,electrical and electronic technologies has put forward higher requirements for the thermal conductivities of polymers and their composites.However,the thermal conductivity coefficient(λ)values of prepared thermally conductive polymer composites are still difficult to achieve expectations,which has become the bottleneck in the fields of thermally conductive polymer composites.Aimed at that,based on the accumulation of the previous research works by related researchers and our research group,this paper proposes three possible directions for breaking through the bottlenecks:(1)preparing and synthesizing intrinsically thermally conductive polymers,(2)reducing the interfacial thermal resistance in thermally conductive polymer composites,and(3)establishing suitable thermal conduction models and studying inner thermal conduction mechanism to guide experimental optimization.Also,the future development trends of the three above-mentioned directions are foreseen,hoping to provide certain basis and guidance for the preparation,researches and development of thermally conductive polymers and their composites.
基金Funded by Guangdong Provincal Natural Science Foundation(No.05006564) and Science &Technology Programof GuangdongProvince(No.2004B10301007)
文摘SnO2-glaze composites were prepared by Sb-doped SnO2 and SiO2-CaO-Al2O3-B2O3 glaze. The composites changed from an electrical insulator to a conductor as the SnO2 content increased from Owt% to 90 wt% . The complex impedance spectra of the fabricated composites were investigated in the frequency range of 100Hz-40 MHz and three kinds of typical shape of complex impedance spectra were recorded and analyzed. The ,spectrum is quite close to the model of conduction via nonohmic contactiug when the SnO2 content is relatively low, In high loading region, the spectrum shows the conduction pattern through ohmic contact chains . In the moderate loading region, the model is a mixture of the above two models. Equivalent circuit of the composite changes from resistor-capacitor circuit to resistor-inductor circuit as the content of SnO2 increases.
基金financially supported by the National Key Research and Development Program of China(Nos.2018YFB0704400,2017YFB0406100)the National Nature Science Foundation of China(Nos.51671129,51971132,51501111,51471106)
文摘The inclination angle of the flake particle has a significant impact on the in-plane thermal conductivity of composites.The graphite flake/Al composites(50 vol%)with different inclination angles were fabricated via flake powder metallurgy,and the results show that with increasing the size of Al particle from 25.6 to 50.7μm,the inclination angle of graphite flake decreases from 7.3°to 4.4°,while the in-plane thermal conductivity of composites increases from 473 to 555 Wm-1 K-1.Based on the rules of mixture,an effective model was established to qualify and quantify the relation between the inclination angle and the in-plane thermal conductivity of the corresponding composites.This model can also be applied to other flake particle-reinforced composites.
文摘Materials such as Koch AH-70,basalt aggregate,limestone powder and graphite particles were used to prepare conductive asphalt concrete,which is a new type of multifunctional concrete.The mix proportion by weight was shown as follows.Fine aggregates (2.36-4.75 mm)∶fine aggregates (<2.36mm)∶limestone powder∶asphalt=120∶240∶14∶30.The content of added graphite particles ranged from 0% to 20%(by the weight of asphalt concrete).A conductive asphalt concrete with a resistivity around 10-10 3Ω·m was obtained.Special attention was paid to the effects of graphite content,graphite physical-chemical properties,asphalt content and temperature on the resistivity.Furthermore,an attempt was made to develop an electrically conductive model for asphalt concrete.
