The microstructure and mechanical properties of Mg–6Zn–1Y and Mg–6Zn–3Y（wt%） alloys under different cooling rates were investigated. The results show that the second dendrite arm spacing（SDAS） of Mg–6Zn–1Y a...The microstructure and mechanical properties of Mg–6Zn–1Y and Mg–6Zn–3Y（wt%） alloys under different cooling rates were investigated. The results show that the second dendrite arm spacing（SDAS） of Mg–6Zn–1Y and Mg–6Zn–3Y is reduced by 32 and 30% with increasing cooling rates（Rc） from 10.2 to 23 K/s, which can be predicted using a empirical model of SDAS=68 R 0：45：45cand SDAS=73 R 0c, respectively. The compressive strength of both alloys increases with increasing the cooling rate, which is attributed to the increase of volume fraction（Vf） of secondary phases under high cooling rate. The interaction of the cooling rate and component with SDAS has been theoretically analyzed using interdependence theory.展开更多
A traffic matrix is a necessary parameter fornetwork management functions,and itsupplies a flow-level view of a largescale IP-over-WDM backbone network.This paper studies the problem of traffic matrix estimationand pr...A traffic matrix is a necessary parameter fornetwork management functions,and itsupplies a flow-level view of a largescale IP-over-WDM backbone network.This paper studies the problem of traffic matrix estimationand proposes an exact traffic matrix estimation approach based on network tomography techniques.The traditional network tomography model is extended to make it compatible with compressive sensing constraints.First,a stochastic perturbation is introduced in the traditional network tomography inference model.Then,an algorithm is proposed to achieve additional optical link observations via optical bypass techniques.The obtained optical link observations are used as extensions for the perturbed network tomography model to ensure that the synthetic model can meetcompressive sensing constraints.Finally,the traffic matrix is estimated from the synthetic model by means of a compressive sensing recovery algorithm.展开更多
Powders in granulated form are used in various processes to facilitate convenient usage. The durability of the formed granules is a crucial parameter, typically evaluated by the compressive strength of the gran- ules....Powders in granulated form are used in various processes to facilitate convenient usage. The durability of the formed granules is a crucial parameter, typically evaluated by the compressive strength of the gran- ules. However, especially for granules with a diameter in the order of tens of microns, statistically relevant testing of individual granules is not a feasible alternative, and in such cases uniaxial bed compression is required. There has not been consensus on whether uniaxial compression of a granule bed can be used to study the fracture of micron size or brittle granules. In our case study of a bed of sintered kaolinite granules with diameters under 100 μm, we show how the compressive strength of individual granules can be obtained from the compressive measurement of the entire bed by plotting the relative density versus the logarithmic pressure scale. We compressed the kaolinite powder with different loads; microscopy confirmed that below the ana- lyzed strength the granules are intact, though the granules start to fracture in the curved region on the compression curve. We found that angle-fitting can be used to locate the average compressive strength on the compression curve and to follow the evolution of strength with sintering temperature. The experi- ments in unison demonstrate that compression curve analysis is applicable for strength analysis of brittle granules.展开更多
基金financially supported by the National Natural Science Foundation of China (NO. 51464034)the Cooperation and Exchanges of Nanchang City (2012DWHZXCL@JDYTH-001)+5 种基金the Educational Commission of Jiangxi Province (No. GJJ13069)the Innovation Fund Designated for Graduate Students of Jiangxi Province (No. YC2013-S027)the Hong Kong Scholars Program (No. XJ2012025)the China Post-doctoral Science Foundation funded project (No. 2012T50594, 2014M551866)the Jiangxi Post-doctoral Science Foundation (No. 2014KY11)Doctoral Fund of Ministry of Education of China (No. 20113601110008)
文摘The microstructure and mechanical properties of Mg–6Zn–1Y and Mg–6Zn–3Y（wt%） alloys under different cooling rates were investigated. The results show that the second dendrite arm spacing（SDAS） of Mg–6Zn–1Y and Mg–6Zn–3Y is reduced by 32 and 30% with increasing cooling rates（Rc） from 10.2 to 23 K/s, which can be predicted using a empirical model of SDAS=68 R 0：45：45cand SDAS=73 R 0c, respectively. The compressive strength of both alloys increases with increasing the cooling rate, which is attributed to the increase of volume fraction（Vf） of secondary phases under high cooling rate. The interaction of the cooling rate and component with SDAS has been theoretically analyzed using interdependence theory.
基金supported in part by the National Natural Science Foundation of China(Nos.61571104,61071124,61501105)the General Project of Scientific Research of the Education Department of Liaoning Province(No.L20150174)+2 种基金the Program for New Century Excellent Talents in University(No.NCET-11-0075)the Fundamental Research Funds for the Central Universities(Nos.N150402003,N120804004,N130504003,N150404018)the State Scholarship Fund(201208210013)
文摘A traffic matrix is a necessary parameter fornetwork management functions,and itsupplies a flow-level view of a largescale IP-over-WDM backbone network.This paper studies the problem of traffic matrix estimationand proposes an exact traffic matrix estimation approach based on network tomography techniques.The traditional network tomography model is extended to make it compatible with compressive sensing constraints.First,a stochastic perturbation is introduced in the traditional network tomography inference model.Then,an algorithm is proposed to achieve additional optical link observations via optical bypass techniques.The obtained optical link observations are used as extensions for the perturbed network tomography model to ensure that the synthetic model can meetcompressive sensing constraints.Finally,the traffic matrix is estimated from the synthetic model by means of a compressive sensing recovery algorithm.
文摘Powders in granulated form are used in various processes to facilitate convenient usage. The durability of the formed granules is a crucial parameter, typically evaluated by the compressive strength of the gran- ules. However, especially for granules with a diameter in the order of tens of microns, statistically relevant testing of individual granules is not a feasible alternative, and in such cases uniaxial bed compression is required. There has not been consensus on whether uniaxial compression of a granule bed can be used to study the fracture of micron size or brittle granules. In our case study of a bed of sintered kaolinite granules with diameters under 100 μm, we show how the compressive strength of individual granules can be obtained from the compressive measurement of the entire bed by plotting the relative density versus the logarithmic pressure scale. We compressed the kaolinite powder with different loads; microscopy confirmed that below the ana- lyzed strength the granules are intact, though the granules start to fracture in the curved region on the compression curve. We found that angle-fitting can be used to locate the average compressive strength on the compression curve and to follow the evolution of strength with sintering temperature. The experi- ments in unison demonstrate that compression curve analysis is applicable for strength analysis of brittle granules.
