Engineering transition metal compounds(TMCs)catalysts with excellent adsorption-catalytic ability has been one of the most effec-tive strategies to accelerate the redox kinetics of sulfur cathodes.Herein,this review f...Engineering transition metal compounds(TMCs)catalysts with excellent adsorption-catalytic ability has been one of the most effec-tive strategies to accelerate the redox kinetics of sulfur cathodes.Herein,this review focuses on engineering TMCs catalysts by cation doping/anion doping/dual doping,bimetallic/bi-anionic TMCs,and TMCs-based heterostructure composites.It is obvious that introducing cations/anions to TMCs or constructing heterostructure can boost adsorption-catalytic capacity by regulating the electronic structure including energy band,d/p-band center,electron filling,and valence state.Moreover,the elec-tronic structure of doped/dual-ionic TMCs are adjusted by inducing ions with different electronegativity,electron filling,and ion radius,resulting in electron redistribution,bonds reconstruction,induced vacancies due to the electronic interaction and changed crystal structure such as lat-tice spacing and lattice distortion.Different from the aforementioned two strategies,heterostructures are constructed by two types of TMCs with different Fermi energy levels,which causes built-in electric field and electrons transfer through the interface,and induces electron redistribution and arranged local atoms to regulate the electronic structure.Additionally,the lacking studies of the three strategies to comprehensively regulate electronic structure for improving catalytic performance are pointed out.It is believed that this review can guide the design of advanced TMCs catalysts for boosting redox of lithium sulfur batteries.展开更多
The alteration and formation of toxic compounds and potential changes in the toxicity of emissions when using after-treatment technologies have gained wide attention. Volatile organic compound（VOC）, carbonyl compoun...The alteration and formation of toxic compounds and potential changes in the toxicity of emissions when using after-treatment technologies have gained wide attention. Volatile organic compound（VOC）, carbonyl compound and particle-phase polycyclic aromatic hydrocarbon（PAH） emissions were tested at European Steady State Cycle（ESC） to study unregulated emissions from a diesel engine with a fuel-borne catalyst and diesel particulate filter（FBC–DPF）. An Fe-based fuel-borne catalyst was used for this study. According to the results, brake specific emissions of total VOCs without and with DPF were 4.7 and4.9 mg/kWh, respectively, showing a 4.3% increase. Benzene and n-undecane emissions increased and toluene emission decreased, while other individual VOC emissions basically had no change. When retrofitted with the FBC–DPF, total carbonyl compound emission decreased 15.7%, from 25.8 to 21.8 mg/kWh. The two highest carbonyls, formaldehyde and acetaldehyde, were reduced from 20.0 and 3.7 to 16.5 and 3.3 mg/kWh respectively. The specific reactivity（SR） with DPF was reduced from 6.68 to 6.64 mg/kWh. Total particle-phase PAH emissions decreased 66.4% with DPF compared to that without DPF. However, the Benzo[a]pyrene equivalent（BaPeq） with DPF had increased from 0.016 to 0.030 mg/kWh.Fluoranthene and Pyrene had the greatest decrease, 91.1% and 88.4% respectively. The increase of two- and three-ring PAHs with DPF indicates that the fuel-borne catalyst caused some gas-phase PAHs to adsorb on particles. The results of this study expand the knowledge of the effects of using a particulate filter and a Fe-based fuel-borne catalyst on diesel engine unregulated emissions.展开更多
Allantoin was synthesized with the yield as high as 68.5% using H3PW12O40. xH(2)O as catalyst. Optimum conditions for the synthesis were determined. It. was found that the heteropoly compound has higher catalytic acti...Allantoin was synthesized with the yield as high as 68.5% using H3PW12O40. xH(2)O as catalyst. Optimum conditions for the synthesis were determined. It. was found that the heteropoly compound has higher catalytic activity than conventional inorganic acid catalysts (such as hydrochloric acid, etc.)展开更多
β,γ-Unsaturated a-diazocarbonyl compounds possess two reactive sites for electrophilic addition-one at the diazo carbon and the other at the vinylogous γ-position.Controlled by catalyst,divergent transformations ar...β,γ-Unsaturated a-diazocarbonyl compounds possess two reactive sites for electrophilic addition-one at the diazo carbon and the other at the vinylogous γ-position.Controlled by catalyst,divergent transformations are achieved starting from the same starting materials,either by Lewis acid-catalyzed addition or by dirhodium-catalyzed metal carbene reactions.In select cases two catalysts working in combination or in sequence provide a relay for cascade transformations.In this review,we summarize advances in catalyst-dependent divergent transformations of β,γ-unsaturated α-diazocarbonyl compounds and highlight the potential of this exciting research area and the many challenges that remain.展开更多
Mg （MgH2）-based composites, using carbon nanotubes （CNTs） and pre-synthesized titanium based complex （TCat） as the cat- alysts, were prepared by high energy ball milling technique. The use of both catalysts demo...Mg （MgH2）-based composites, using carbon nanotubes （CNTs） and pre-synthesized titanium based complex （TCat） as the cat- alysts, were prepared by high energy ball milling technique. The use of both catalysts demonstrated markedly improved the hydrogen storage performance, e.g. a significant increase of hydrogen release rate and decrease of desorption temperature. The synthesized composites can absorb almost 6 wt% of hydrogen within 3 min at 200 ~C and desorb 6 wt% hydrogen in 10 min at 310 ~C. The influence of CNTs and TCat on desorption temperature was also investigated by using temperature programmed desorption （TPD）. The TPD results reveal that the peak desorption temperature and the onset temperature can be lowered by 109 ~C and 155 ~C, respectively, compared to the non-catalyzed MgH2. The reaction enthalpy and entropy of hydrogen de- sorption for the synthesized MgH2-based composites are calculated by the van＇t Hoff analysis to be 73.1 kJ/mol H2 and 130.2 J/mol H2 K, respectively.展开更多
基金The authors acknowledge funding from National Natural Science Foundation of China(52302307)Shaanxi Province(2023-ZDLGY-24,2023-JC-QN-0473)+2 种基金project funded by China Postdoctoral Science Foundation(2023MD734210)the Open Foundation of State Key Laboratory for Advanced Metals and Materials(2022-Z01)Shaanxi Provincial Department of Education industrialization project(21JC018).
文摘Engineering transition metal compounds(TMCs)catalysts with excellent adsorption-catalytic ability has been one of the most effec-tive strategies to accelerate the redox kinetics of sulfur cathodes.Herein,this review focuses on engineering TMCs catalysts by cation doping/anion doping/dual doping,bimetallic/bi-anionic TMCs,and TMCs-based heterostructure composites.It is obvious that introducing cations/anions to TMCs or constructing heterostructure can boost adsorption-catalytic capacity by regulating the electronic structure including energy band,d/p-band center,electron filling,and valence state.Moreover,the elec-tronic structure of doped/dual-ionic TMCs are adjusted by inducing ions with different electronegativity,electron filling,and ion radius,resulting in electron redistribution,bonds reconstruction,induced vacancies due to the electronic interaction and changed crystal structure such as lat-tice spacing and lattice distortion.Different from the aforementioned two strategies,heterostructures are constructed by two types of TMCs with different Fermi energy levels,which causes built-in electric field and electrons transfer through the interface,and induces electron redistribution and arranged local atoms to regulate the electronic structure.Additionally,the lacking studies of the three strategies to comprehensively regulate electronic structure for improving catalytic performance are pointed out.It is believed that this review can guide the design of advanced TMCs catalysts for boosting redox of lithium sulfur batteries.
基金financial support from the National Natural Science Foundation of China (No. 51276021)the Development Projects of Shandong Province Science and Technology (No. 2011YD17001)
文摘The alteration and formation of toxic compounds and potential changes in the toxicity of emissions when using after-treatment technologies have gained wide attention. Volatile organic compound（VOC）, carbonyl compound and particle-phase polycyclic aromatic hydrocarbon（PAH） emissions were tested at European Steady State Cycle（ESC） to study unregulated emissions from a diesel engine with a fuel-borne catalyst and diesel particulate filter（FBC–DPF）. An Fe-based fuel-borne catalyst was used for this study. According to the results, brake specific emissions of total VOCs without and with DPF were 4.7 and4.9 mg/kWh, respectively, showing a 4.3% increase. Benzene and n-undecane emissions increased and toluene emission decreased, while other individual VOC emissions basically had no change. When retrofitted with the FBC–DPF, total carbonyl compound emission decreased 15.7%, from 25.8 to 21.8 mg/kWh. The two highest carbonyls, formaldehyde and acetaldehyde, were reduced from 20.0 and 3.7 to 16.5 and 3.3 mg/kWh respectively. The specific reactivity（SR） with DPF was reduced from 6.68 to 6.64 mg/kWh. Total particle-phase PAH emissions decreased 66.4% with DPF compared to that without DPF. However, the Benzo[a]pyrene equivalent（BaPeq） with DPF had increased from 0.016 to 0.030 mg/kWh.Fluoranthene and Pyrene had the greatest decrease, 91.1% and 88.4% respectively. The increase of two- and three-ring PAHs with DPF indicates that the fuel-borne catalyst caused some gas-phase PAHs to adsorb on particles. The results of this study expand the knowledge of the effects of using a particulate filter and a Fe-based fuel-borne catalyst on diesel engine unregulated emissions.
文摘Allantoin was synthesized with the yield as high as 68.5% using H3PW12O40. xH(2)O as catalyst. Optimum conditions for the synthesis were determined. It. was found that the heteropoly compound has higher catalytic activity than conventional inorganic acid catalysts (such as hydrochloric acid, etc.)
基金the National Institutes of Health(No.GM 46503)the National Science Foundation(No.CHE-1212446)the starting funding from Soochow University and Key Laboratory of Organic Synthesis of Jiangsu Province
文摘β,γ-Unsaturated a-diazocarbonyl compounds possess two reactive sites for electrophilic addition-one at the diazo carbon and the other at the vinylogous γ-position.Controlled by catalyst,divergent transformations are achieved starting from the same starting materials,either by Lewis acid-catalyzed addition or by dirhodium-catalyzed metal carbene reactions.In select cases two catalysts working in combination or in sequence provide a relay for cascade transformations.In this review,we summarize advances in catalyst-dependent divergent transformations of β,γ-unsaturated α-diazocarbonyl compounds and highlight the potential of this exciting research area and the many challenges that remain.
基金supported by the Australian Research Council(ARC)
文摘Mg （MgH2）-based composites, using carbon nanotubes （CNTs） and pre-synthesized titanium based complex （TCat） as the cat- alysts, were prepared by high energy ball milling technique. The use of both catalysts demonstrated markedly improved the hydrogen storage performance, e.g. a significant increase of hydrogen release rate and decrease of desorption temperature. The synthesized composites can absorb almost 6 wt% of hydrogen within 3 min at 200 ~C and desorb 6 wt% hydrogen in 10 min at 310 ~C. The influence of CNTs and TCat on desorption temperature was also investigated by using temperature programmed desorption （TPD）. The TPD results reveal that the peak desorption temperature and the onset temperature can be lowered by 109 ~C and 155 ~C, respectively, compared to the non-catalyzed MgH2. The reaction enthalpy and entropy of hydrogen de- sorption for the synthesized MgH2-based composites are calculated by the van＇t Hoff analysis to be 73.1 kJ/mol H2 and 130.2 J/mol H2 K, respectively.
