According to the morphological structure characteristics of plants, the de- velopment mode for component-based virtual plants software was put forward, and the internal structure of plant organs component under this m...According to the morphological structure characteristics of plants, the de- velopment mode for component-based virtual plants software was put forward, and the internal structure of plant organs component under this mode were analyzed, thereby, the overall design mode for virtual plants software was given out, and its characteristics were estimated. Compared with traditional development modes of virtual plants software, component-based virtual plants software had significant advantages in code reusing, development efficiency and expansion of software functions.展开更多
A new method that designs and implements the component-based distributed & hierarchical flexible manufacturing control software is described with a component concept in this paper. The proposed method takes aim at...A new method that designs and implements the component-based distributed & hierarchical flexible manufacturing control software is described with a component concept in this paper. The proposed method takes aim at improving the flexibility and reliability of the control system. On the basis of describing the concepts of component-based software and the distributed object technology, the architecture of the component-based software of the control system is suggested with the Common Object Request Broker Architecture (CORBA). And then, we propose a design method for component-based distributed & hierarchical flexible manufacturing control system. Finally, to verify the software design method, a prototype flexible manufacturing control system software has been implemented in Orbix 2.3c, VC + + 6. 0 and has been tested in connection with the physical flexible manufacturing shop at the WuXi Professional Institute.展开更多
In a component-based software development life cycle, selection of preexisting components is an important task. Every component that has to be reused has an associated risk of failure of not meeting the functional and...In a component-based software development life cycle, selection of preexisting components is an important task. Every component that has to be reused has an associated risk of failure of not meeting the functional and non-functional requirements. A component's failure would lead a developer to look for some other alternative of combinations of COTS, in-house and engineered components among possible candidate combinations. This means design itself can readily change. The very process of design of a software system and component selection seems to be heavily dependent on testing results. Instability of design, further, becomes more severe due to requirements change requests. Therefore, this instability of design has to be essentially mitigated by using proper design and testing approaches, otherwise, it may lead to exorbitantly high testing cost due to the repeated testing of various alternatives. How these three activities: Component-based software design, component selection and component-based software testing are interrelated? What process model is most suited to address this concern? This work explores the above questions and their implication in terms of nature of a process model that can be convincing in case of component-based software development.展开更多
In view of the flaws of component-based software （CBS） reliability modeling and analysis, the low recognition degree of debugging process, too many assumptions and difficulties in obtaining the solution, a CBS relia...In view of the flaws of component-based software （CBS） reliability modeling and analysis, the low recognition degree of debugging process, too many assumptions and difficulties in obtaining the solution, a CBS reliability simulation process is presented incorporating the imperfect debugging and the limitation of debugging resources. Considering the effect of imperfect debugging on fault detec- tion and correction process, a CBS integration testing model is sketched by multi-queue muhichannel and finite server queuing model （MMFSQM）. Compared with the analytical method based on pa- rameters and other nonparametric approaches, the simulation approach can relax more of the usual reliability modeling assumptions and effectively expound integration testing process of CBS. Then, CBS reliability process simulation procedure is developed accordingly. The proposed simulation ap- proach is validated to be sound and effective by simulation experiment studies and analysis.展开更多
For a more accurate and comprehensive assessment of the trustworthiness of component-based soft- ware system, the fuzzy analytic hierarchy process is introduced to establish the analysis model. Combine qualitative and...For a more accurate and comprehensive assessment of the trustworthiness of component-based soft- ware system, the fuzzy analytic hierarchy process is introduced to establish the analysis model. Combine qualitative and quantitative analyses, the impacts to overall trustworthiness by the different types of components are distinguished. Considering the coupling relationship between components, dividing the system into several layers from target layer to scheme layer, evaluating the scheme advantages disadvantages by group decision-making, the trustworthiness of a typical J2EE structured component-based software is assessed. The trustworthiness asses model of the software components provides an effective methods of operation.展开更多
Against the deficiencies of component-based software(CBS) reliability modeling and analysis,for instance,importing too many assumptions,paying less attention to debugging process without considering imperfect debuggin...Against the deficiencies of component-based software(CBS) reliability modeling and analysis,for instance,importing too many assumptions,paying less attention to debugging process without considering imperfect debugging and change-point(CP) problems adequately,an approach of CBS reliability process analysis is proposed which incorporates the imperfect debugging and CP.First,perfect/imperfect debugging and CP are reviewed.Based on the queuing theory,a multi-queue multichannel and infinite server queuing model(MMISQM) is presented to sketch the integration test process of CBS.Meanwhile,considering the effects of imperfect debugging and CP,expressions for fault detection and correction are derived based on MMISQM.Numerical results demonstrate that the proposed model can sketch the integration test process of CBS with preferable performance which outperforms other models.展开更多
In view of the problems and the weaknesses of component-based software （ CBS ） reliability modeling and analysis, and a lack of consideration for real debugging circumstance of integration tes- ting, a CBS reliabili...In view of the problems and the weaknesses of component-based software （ CBS ） reliability modeling and analysis, and a lack of consideration for real debugging circumstance of integration tes- ting, a CBS reliability process analysis model is proposed incorporating debugging time delay, im- perfect debugging and limited debugging resources. CBS integration testing is formulated as a multi- queue muhichannel and finite server queuing model （MMFSQM） to illustrate fault detection process （FDP） and fault correction process （FCP）. A unified FCP is sketched, given debugging delay, the diversities of faults processing and the limitations of debugging resources. Furthermore, the impacts of imperfect debugging on fault detection and correction are explicitly elaborated, and the expres- sions of the cumulative number of fault detected and corrected are illustrated. Finally, the results of numerical experiments verify the effectiveness and rationality of the proposed model. By comparison, the proposed model is superior to the other models. The proposed model is closer to real CBS testing process and facilitates software engineer＇ s quantitatively analyzing, measuring and predicting CBS reliability. K展开更多
Since most of the available component-based software reliability models consume high computational cost and suffer from the evaluating complexity for the software system with complex structures,a component-based back-...Since most of the available component-based software reliability models consume high computational cost and suffer from the evaluating complexity for the software system with complex structures,a component-based back-propagation reliability model(CBPRM)with low complexity for the complex software system reliability evaluation is presented in this paper.The proposed model is based on the artificial neural networks and the component reliability sensitivity analyses.These analyses are performed dynamically and assigned to the neurons to optimize the reliability evaluation.CBPRM has a linear increasing complexity and outperforms the state-based and the path-based reliability models.Another advantage of CBPRM over others is its robustness.CBPRM depends on the component reliabilities and the correlative sensitivities,which are independent from the software system structure.Based on the theory analysis and experiment results,it shows that the complexity of CBPRM is evidently lower than the contrast models and the reliability evaluating accuracy is acceptable when the software system structure is complex.展开更多
A new kind offl biomedical titanium alloy, Ti-35Nb-4Sn-6Mo-9Zr, composed of non-toxic elements Nb, Mo, Zr and Sn with lower elastic modulus and higher strength was designed based on d-electron alloy design theory and ...A new kind offl biomedical titanium alloy, Ti-35Nb-4Sn-6Mo-9Zr, composed of non-toxic elements Nb, Mo, Zr and Sn with lower elastic modulus and higher strength was designed based on d-electron alloy design theory and JMatPro software using orthogonal experiment. The microstructure and basic mechanical properties of designed alloy were investigated. The results show that the alloy is composed of single fl equiaxed grains after solution treatment at 800 ~C. Compared with Ti-6A1-4V, the mechanical properties of the designed alloy are more excellent： E=65 GPa, σb=834 MPa, σ0.2=802 MPa, and σ=11%, which is expected to become a promising new type implanted material. The research approach adopted can reduce the experimental time and cost effectively, and get the ideal experimental results.展开更多
In order to assure quality and control process in the development of the aircraft collaborative design software, a maturity assessment model is proposed. The requirements designing—house of quality is designed to eva...In order to assure quality and control process in the development of the aircraft collaborative design software, a maturity assessment model is proposed. The requirements designing—house of quality is designed to evaluate the maturity degree of the solution, and the evaluation results can help to manage and control the development process. Furthermore, a fuzzy evaluation method based on the minimum deviation is proposed to deal with the fuzzy information. The quantitative evaluation result of the maturity degree can be calculated by optimizing the semantic discount factor aim for the minimum deviation. Finally, this model is illustrated and analyzed by an example study of the aircraft collaborative design software.展开更多
3D digital design for cranes’ structures based on hybrid software architecture of Client/Server and Browser/Server is introduced in this paper. Based on Pro/ENGINEER platform,3D parametric model family is built to al...3D digital design for cranes’ structures based on hybrid software architecture of Client/Server and Browser/Server is introduced in this paper. Based on Pro/ENGINEER platform,3D parametric model family is built to allow generation of feasible configurations of cranes’ structures in Client/Server framework. Taking use of Visual C++,the second exploiting software kit provided by Pro/ENGINEER and ANSYS GUI/APDL modeling patterns,an integration method of 3D CAD and CAE is achieved,which includes regeneration of 3D parametric model,synchronous updating and analysis of FEA model. As in Browser/Server framework,the 3D CAD models of parts,components and the whole structure could also be displayed in the customer’s browser in VRML format.展开更多
Design patterns are object oriented software design practices for solving common design problems and they affect software quality. In this study, we investigate the relationship of design patterns and software defects...Design patterns are object oriented software design practices for solving common design problems and they affect software quality. In this study, we investigate the relationship of design patterns and software defects in a number of open source software projects. Design pattern instances are extracted from the source code repository of these open source software projects. Software defect metrics are extracted from the bug tracking systems of these projects. Using correlation and regression analysis on extracted data, we examine the relationship between design patterns and software defects. Our findings indicate that there is little correlation between the total number of design pattern instances and the number of defects. However, our regression analysis reveals that individual design pattern instances as a group have strong influences on the number of defects. Furthermore, we find that the number of design pattern instances is positively correlated to defect priority. Individual design pattern instances may have positive or negative impacts on defect priority.展开更多
This paper points out various relationships between Design Knowledge and Software Engineering. After introduction of human design, the relationships between industrial Software Engineering is discussed, then further d...This paper points out various relationships between Design Knowledge and Software Engineering. After introduction of human design, the relationships between industrial Software Engineering is discussed, then further details of human design knowledge are revealed with discussions on humanistic aspects of design.展开更多
In this paper, we merge software trustworthiness with software design and present an approach to trustworthy software design with an automatically adapting software update. First, software behavior and results can be ...In this paper, we merge software trustworthiness with software design and present an approach to trustworthy software design with an automatically adapting software update. First, software behavior and results can be expected and behavior states can be monitored when a software runs by introducing a trustworthy behavior trace on a software and inserting a checkpoint sensor at each checkpoint of the trustworthy software. Second, an updated approach of the trustworthy behavior trace for the software at the level of checkpoints is presented. The trustworthy behavior traces of the software for two versions can be merged adequately by constructing split points and merge points between two trustworthy behavior traces. Finally, experiments and analyses show that： （1） the software designed by our approach can detect and report the anomaly in a software automatically and effectively, so it has a higher ability of trustworthiness evaluation than the traditional software; and （2） our approach can realize the accurate update of the trustworthy behavior trace with a lower space overhead of checkpoints when the software updates.展开更多
The technologies of software architecture are introduced, and the software analysis-and-design process is divided into requirement analysis, software architecture design and system design. Using these technologies, a ...The technologies of software architecture are introduced, and the software analysis-and-design process is divided into requirement analysis, software architecture design and system design. Using these technologies, a model of architecture-centric software analysis and design process（ACSADP） is proposed. Meanwhile, with regard to the completeness, consistency and correctness between the software requirements and design results, the theories of function and process control are applied to ACSADP. Finally, a model of integrated development environnment （IDE） for ACSADP is propcsed. It can be demonstrated by the practice that the model of ACSADP can aid developer to manage software process effectively and improve the quality of software analysis and design.展开更多
Presents the design scheme developed for design of software for Integrated Passive and Active Vibration Control(IPAVC) and the coding of a prototyne system, and the selection of the famous finite element program MSC/N...Presents the design scheme developed for design of software for Integrated Passive and Active Vibration Control(IPAVC) and the coding of a prototyne system, and the selection of the famous finite element program MSC/NASTRAN as an important module of software to deal with large and complicated structures and systems with an example to demonstrate the prototype system.展开更多
In this paper, we propose a novel methodology to guide and assist practitioners supporting software architecture and design activities in agile environments. Software architecture and design is the skeleton of a syste...In this paper, we propose a novel methodology to guide and assist practitioners supporting software architecture and design activities in agile environments. Software architecture and design is the skeleton of a system. It defines how the system has to behave in terms of different functional and non-functional requirements. Currently, a clear specification of software architectural design activities and processes in agile environments does not exist. Our methodology describes in detail the phases in the agile software design process and proposes techniques and tools to implement these phases.展开更多
This paper presents the design of a computational software system that enables solutions of multi-phase and multi-scale problems in mechanics. It demonstrated how mechanicians can design “process-driven” software sy...This paper presents the design of a computational software system that enables solutions of multi-phase and multi-scale problems in mechanics. It demonstrated how mechanicians can design “process-driven” software systems directly, and that such efforts are more suitable in solving multi-phase or multi-scale problems, rather than utilizing the “data-driven” approaches of legacy network systems. Specifically, this paper demonstrates how this approach can be used to solve problems in flexible dynamics. Then it suggests a view of mechanics algorithms as ‘state equilibrium’ enforcers residing as servers, rather than as computer programs that solve field equations. It puts forth the need for identical input/output files to ensure widespread deployment on laptops. Then it presents an assessment of the laptop platform. A software system such as the one presented here can also be used to supply virtual environments, animations and entertainment/education software with physics.展开更多
Software engineering has been taught at many institutions as individual course for many years. Recently, many higher education institutions offer a BSc degree in Software Engineering. Software engineers are required, ...Software engineering has been taught at many institutions as individual course for many years. Recently, many higher education institutions offer a BSc degree in Software Engineering. Software engineers are required, especially at the small enterprises, to play many roles, and sometimes simultaneously. Beside the technical and managerial skills, software engineers should have additional intellectual skills such as domain-specific abstract thinking. Therefore, software engineering curriculum should help the students to build and improve their skills to meet the labor market needs. This study aims to explore the perceptions of software engineering students on the influence of learning software modeling and design on their domain-specific abstract thinking. Also, we explore the role of the course project in improving their domain-specific abstract thinking. The study results have shown that, most of the surveyed students believe that learning and practicing modeling and design concepts contribute to their ability to think abstractly on specific domain. However, this finding is influenced by the students’ lack of the comprehension of some modeling and design aspects (e.g., generalization). We believe that, such aspects should be introduced to the students at early levels of software engineering curriculum, which certainly will improve their ability to think abstractly on specific domain.展开更多
The case study presented here uses an interpretivist (qualitative, humanistic) approach to illustrate and describe a range of interactions and behaviors that occur during design meetings where mentoring and design sim...The case study presented here uses an interpretivist (qualitative, humanistic) approach to illustrate and describe a range of interactions and behaviors that occur during design meetings where mentoring and design simultaneously occur within a software engineering firm, during a portion of the design phase for a software project. It attempts to examine the interaction between two design team members (one novice and one expert) and describes how these observations intersect with the theoretical and applied literature and actual design processes. Taking cues from two theoretical descriptions of the design process, the study presented here suggests that modes and models of mentorship should be added, when applicable, as a descriptive portion of the design process.展开更多
基金Supported by the National Natural Science Foundation of China(61062007)the Principal Fund Project of Tarim University,China(TDZKSS201115)~~
文摘According to the morphological structure characteristics of plants, the de- velopment mode for component-based virtual plants software was put forward, and the internal structure of plant organs component under this mode were analyzed, thereby, the overall design mode for virtual plants software was given out, and its characteristics were estimated. Compared with traditional development modes of virtual plants software, component-based virtual plants software had significant advantages in code reusing, development efficiency and expansion of software functions.
基金Supported by National High Technology Development plan(Item No.:2001AA412250)and Shanghai Science & Technology Development Project(Item No.:02FK04)
文摘A new method that designs and implements the component-based distributed & hierarchical flexible manufacturing control software is described with a component concept in this paper. The proposed method takes aim at improving the flexibility and reliability of the control system. On the basis of describing the concepts of component-based software and the distributed object technology, the architecture of the component-based software of the control system is suggested with the Common Object Request Broker Architecture (CORBA). And then, we propose a design method for component-based distributed & hierarchical flexible manufacturing control system. Finally, to verify the software design method, a prototype flexible manufacturing control system software has been implemented in Orbix 2.3c, VC + + 6. 0 and has been tested in connection with the physical flexible manufacturing shop at the WuXi Professional Institute.
文摘In a component-based software development life cycle, selection of preexisting components is an important task. Every component that has to be reused has an associated risk of failure of not meeting the functional and non-functional requirements. A component's failure would lead a developer to look for some other alternative of combinations of COTS, in-house and engineered components among possible candidate combinations. This means design itself can readily change. The very process of design of a software system and component selection seems to be heavily dependent on testing results. Instability of design, further, becomes more severe due to requirements change requests. Therefore, this instability of design has to be essentially mitigated by using proper design and testing approaches, otherwise, it may lead to exorbitantly high testing cost due to the repeated testing of various alternatives. How these three activities: Component-based software design, component selection and component-based software testing are interrelated? What process model is most suited to address this concern? This work explores the above questions and their implication in terms of nature of a process model that can be convincing in case of component-based software development.
基金Supported by the National High Technology Research and Development Program of China(No.2008AA01A201)the National Nature Science Foundation of China(No.60503015,90818016)
文摘In view of the flaws of component-based software （CBS） reliability modeling and analysis, the low recognition degree of debugging process, too many assumptions and difficulties in obtaining the solution, a CBS reliability simulation process is presented incorporating the imperfect debugging and the limitation of debugging resources. Considering the effect of imperfect debugging on fault detec- tion and correction process, a CBS integration testing model is sketched by multi-queue muhichannel and finite server queuing model （MMFSQM）. Compared with the analytical method based on pa- rameters and other nonparametric approaches, the simulation approach can relax more of the usual reliability modeling assumptions and effectively expound integration testing process of CBS. Then, CBS reliability process simulation procedure is developed accordingly. The proposed simulation ap- proach is validated to be sound and effective by simulation experiment studies and analysis.
基金Sponsored by the National High Technology Research and Development Program of China ("863"Program) (2009AA01Z433)
文摘For a more accurate and comprehensive assessment of the trustworthiness of component-based soft- ware system, the fuzzy analytic hierarchy process is introduced to establish the analysis model. Combine qualitative and quantitative analyses, the impacts to overall trustworthiness by the different types of components are distinguished. Considering the coupling relationship between components, dividing the system into several layers from target layer to scheme layer, evaluating the scheme advantages disadvantages by group decision-making, the trustworthiness of a typical J2EE structured component-based software is assessed. The trustworthiness asses model of the software components provides an effective methods of operation.
基金Supported by the National High Technology Research and Development Program of China(No.2008AA01A201)the National Natural ScienceFoundation of China(No.60503015)+1 种基金the National Key R&D Program of China(No.2013BA17F02)the Shandong Province Science andTechnology Program of China(No.2011GGX10108,2010GGX10104)
文摘Against the deficiencies of component-based software(CBS) reliability modeling and analysis,for instance,importing too many assumptions,paying less attention to debugging process without considering imperfect debugging and change-point(CP) problems adequately,an approach of CBS reliability process analysis is proposed which incorporates the imperfect debugging and CP.First,perfect/imperfect debugging and CP are reviewed.Based on the queuing theory,a multi-queue multichannel and infinite server queuing model(MMISQM) is presented to sketch the integration test process of CBS.Meanwhile,considering the effects of imperfect debugging and CP,expressions for fault detection and correction are derived based on MMISQM.Numerical results demonstrate that the proposed model can sketch the integration test process of CBS with preferable performance which outperforms other models.
基金Supported by the National High Technology Research and Development Program of China(No.2008AA01A201)the National Natural Science Foundation of China(No.60503015)+1 种基金the National Key R&D Program of China(No.2013BA17F02)the Shandong Province Science and Technology Program of China(No.2011GGX10108,2010GGX10104)
文摘In view of the problems and the weaknesses of component-based software （ CBS ） reliability modeling and analysis, and a lack of consideration for real debugging circumstance of integration tes- ting, a CBS reliability process analysis model is proposed incorporating debugging time delay, im- perfect debugging and limited debugging resources. CBS integration testing is formulated as a multi- queue muhichannel and finite server queuing model （MMFSQM） to illustrate fault detection process （FDP） and fault correction process （FCP）. A unified FCP is sketched, given debugging delay, the diversities of faults processing and the limitations of debugging resources. Furthermore, the impacts of imperfect debugging on fault detection and correction are explicitly elaborated, and the expres- sions of the cumulative number of fault detected and corrected are illustrated. Finally, the results of numerical experiments verify the effectiveness and rationality of the proposed model. By comparison, the proposed model is superior to the other models. The proposed model is closer to real CBS testing process and facilitates software engineer＇ s quantitatively analyzing, measuring and predicting CBS reliability. K
基金Supported by the National Natural Science Foundation of China(No.60973118,60873075)
文摘Since most of the available component-based software reliability models consume high computational cost and suffer from the evaluating complexity for the software system with complex structures,a component-based back-propagation reliability model(CBPRM)with low complexity for the complex software system reliability evaluation is presented in this paper.The proposed model is based on the artificial neural networks and the component reliability sensitivity analyses.These analyses are performed dynamically and assigned to the neurons to optimize the reliability evaluation.CBPRM has a linear increasing complexity and outperforms the state-based and the path-based reliability models.Another advantage of CBPRM over others is its robustness.CBPRM depends on the component reliabilities and the correlative sensitivities,which are independent from the software system structure.Based on the theory analysis and experiment results,it shows that the complexity of CBPRM is evidently lower than the contrast models and the reliability evaluating accuracy is acceptable when the software system structure is complex.
基金Project(BE2011778)supported by Science and Technology Support Program of Jiangsu Province,ChinaProject(20133069014)supported by Aeronautical Science Foundation of China
文摘A new kind offl biomedical titanium alloy, Ti-35Nb-4Sn-6Mo-9Zr, composed of non-toxic elements Nb, Mo, Zr and Sn with lower elastic modulus and higher strength was designed based on d-electron alloy design theory and JMatPro software using orthogonal experiment. The microstructure and basic mechanical properties of designed alloy were investigated. The results show that the alloy is composed of single fl equiaxed grains after solution treatment at 800 ~C. Compared with Ti-6A1-4V, the mechanical properties of the designed alloy are more excellent： E=65 GPa, σb=834 MPa, σ0.2=802 MPa, and σ=11%, which is expected to become a promising new type implanted material. The research approach adopted can reduce the experimental time and cost effectively, and get the ideal experimental results.
基金supported by the National Natural Science Foundation for Youth of China(61802174)the Natural Science Foundation for Youth of Jiangsu Province(BK20181016)+1 种基金the Natural Science Foundation of the Jiangsu Higher Education Institutions of China(18KJB520019)the Scientific Research Foundation of Nanjing Institute of Technology of China(YKJ201614)
文摘In order to assure quality and control process in the development of the aircraft collaborative design software, a maturity assessment model is proposed. The requirements designing—house of quality is designed to evaluate the maturity degree of the solution, and the evaluation results can help to manage and control the development process. Furthermore, a fuzzy evaluation method based on the minimum deviation is proposed to deal with the fuzzy information. The quantitative evaluation result of the maturity degree can be calculated by optimizing the semantic discount factor aim for the minimum deviation. Finally, this model is illustrated and analyzed by an example study of the aircraft collaborative design software.
基金Supported by Shanghai Leading Academic Discipline Project ,Project Number :T0601
文摘3D digital design for cranes’ structures based on hybrid software architecture of Client/Server and Browser/Server is introduced in this paper. Based on Pro/ENGINEER platform,3D parametric model family is built to allow generation of feasible configurations of cranes’ structures in Client/Server framework. Taking use of Visual C++,the second exploiting software kit provided by Pro/ENGINEER and ANSYS GUI/APDL modeling patterns,an integration method of 3D CAD and CAE is achieved,which includes regeneration of 3D parametric model,synchronous updating and analysis of FEA model. As in Browser/Server framework,the 3D CAD models of parts,components and the whole structure could also be displayed in the customer’s browser in VRML format.
文摘Design patterns are object oriented software design practices for solving common design problems and they affect software quality. In this study, we investigate the relationship of design patterns and software defects in a number of open source software projects. Design pattern instances are extracted from the source code repository of these open source software projects. Software defect metrics are extracted from the bug tracking systems of these projects. Using correlation and regression analysis on extracted data, we examine the relationship between design patterns and software defects. Our findings indicate that there is little correlation between the total number of design pattern instances and the number of defects. However, our regression analysis reveals that individual design pattern instances as a group have strong influences on the number of defects. Furthermore, we find that the number of design pattern instances is positively correlated to defect priority. Individual design pattern instances may have positive or negative impacts on defect priority.
文摘This paper points out various relationships between Design Knowledge and Software Engineering. After introduction of human design, the relationships between industrial Software Engineering is discussed, then further details of human design knowledge are revealed with discussions on humanistic aspects of design.
基金Supported by the National Natural Science Foundation of China (60873203)the Foundation of Key Laboratory of Aerospace Information Security and Trusted Computing Ministry of Education (AISTC2009_03)+1 种基金the Outstanding Youth Foundation of Hebei Province (F2010000317)the Natural Science Foundation of Hebei Province (F2010000319, F2011201039)
文摘In this paper, we merge software trustworthiness with software design and present an approach to trustworthy software design with an automatically adapting software update. First, software behavior and results can be expected and behavior states can be monitored when a software runs by introducing a trustworthy behavior trace on a software and inserting a checkpoint sensor at each checkpoint of the trustworthy software. Second, an updated approach of the trustworthy behavior trace for the software at the level of checkpoints is presented. The trustworthy behavior traces of the software for two versions can be merged adequately by constructing split points and merge points between two trustworthy behavior traces. Finally, experiments and analyses show that： （1） the software designed by our approach can detect and report the anomaly in a software automatically and effectively, so it has a higher ability of trustworthiness evaluation than the traditional software; and （2） our approach can realize the accurate update of the trustworthy behavior trace with a lower space overhead of checkpoints when the software updates.
文摘The technologies of software architecture are introduced, and the software analysis-and-design process is divided into requirement analysis, software architecture design and system design. Using these technologies, a model of architecture-centric software analysis and design process（ACSADP） is proposed. Meanwhile, with regard to the completeness, consistency and correctness between the software requirements and design results, the theories of function and process control are applied to ACSADP. Finally, a model of integrated development environnment （IDE） for ACSADP is propcsed. It can be demonstrated by the practice that the model of ACSADP can aid developer to manage software process effectively and improve the quality of software analysis and design.
文摘Presents the design scheme developed for design of software for Integrated Passive and Active Vibration Control(IPAVC) and the coding of a prototyne system, and the selection of the famous finite element program MSC/NASTRAN as an important module of software to deal with large and complicated structures and systems with an example to demonstrate the prototype system.
文摘In this paper, we propose a novel methodology to guide and assist practitioners supporting software architecture and design activities in agile environments. Software architecture and design is the skeleton of a system. It defines how the system has to behave in terms of different functional and non-functional requirements. Currently, a clear specification of software architectural design activities and processes in agile environments does not exist. Our methodology describes in detail the phases in the agile software design process and proposes techniques and tools to implement these phases.
文摘This paper presents the design of a computational software system that enables solutions of multi-phase and multi-scale problems in mechanics. It demonstrated how mechanicians can design “process-driven” software systems directly, and that such efforts are more suitable in solving multi-phase or multi-scale problems, rather than utilizing the “data-driven” approaches of legacy network systems. Specifically, this paper demonstrates how this approach can be used to solve problems in flexible dynamics. Then it suggests a view of mechanics algorithms as ‘state equilibrium’ enforcers residing as servers, rather than as computer programs that solve field equations. It puts forth the need for identical input/output files to ensure widespread deployment on laptops. Then it presents an assessment of the laptop platform. A software system such as the one presented here can also be used to supply virtual environments, animations and entertainment/education software with physics.
文摘Software engineering has been taught at many institutions as individual course for many years. Recently, many higher education institutions offer a BSc degree in Software Engineering. Software engineers are required, especially at the small enterprises, to play many roles, and sometimes simultaneously. Beside the technical and managerial skills, software engineers should have additional intellectual skills such as domain-specific abstract thinking. Therefore, software engineering curriculum should help the students to build and improve their skills to meet the labor market needs. This study aims to explore the perceptions of software engineering students on the influence of learning software modeling and design on their domain-specific abstract thinking. Also, we explore the role of the course project in improving their domain-specific abstract thinking. The study results have shown that, most of the surveyed students believe that learning and practicing modeling and design concepts contribute to their ability to think abstractly on specific domain. However, this finding is influenced by the students’ lack of the comprehension of some modeling and design aspects (e.g., generalization). We believe that, such aspects should be introduced to the students at early levels of software engineering curriculum, which certainly will improve their ability to think abstractly on specific domain.
文摘The case study presented here uses an interpretivist (qualitative, humanistic) approach to illustrate and describe a range of interactions and behaviors that occur during design meetings where mentoring and design simultaneously occur within a software engineering firm, during a portion of the design phase for a software project. It attempts to examine the interaction between two design team members (one novice and one expert) and describes how these observations intersect with the theoretical and applied literature and actual design processes. Taking cues from two theoretical descriptions of the design process, the study presented here suggests that modes and models of mentorship should be added, when applicable, as a descriptive portion of the design process.
