In industrial processes,there exist faults that have complex effect on process variables.Complex and simple faults are defined according to their effect dimensions.The conventional approaches based on structured resid...In industrial processes,there exist faults that have complex effect on process variables.Complex and simple faults are defined according to their effect dimensions.The conventional approaches based on structured residuals cannot isolate complex faults.This paper presents a multi-level strategy for complex fault isolation.An extraction procedure is employed to reduce the complex faults to simple ones and assign them to several levels.On each level,faults are isolated by their different responses in the structured residuals.Each residual is obtained insensitive to one fault but more sensitive to others.The faults on different levels are verified to have different residual responses and will not be confused.An entire incidence matrix containing residual response characteristics of all faults is obtained,based on which faults can be isolated.The proposed method is applied in the Tennessee Eastman process example,and the effectiveness and advantage are demonstrated.展开更多
The geological background of the Subei basin is that of small relief subsidence, low geothermal gradient, multi-sedimentary hiatuses, intense reconstruction of the basin, frequent magmatic activity, and a unique combi...The geological background of the Subei basin is that of small relief subsidence, low geothermal gradient, multi-sedimentary hiatuses, intense reconstruction of the basin, frequent magmatic activity, and a unique combination of source rock and reservoir. This geological background resulted in characteristics such as many small fault blocks, multiple oil-bearing formations, scattered oil distribution, mini- to small-sized reservoirs, and difficulties in exploration. Aimed at such characteristics, an effective exploration strategy was adopted, and the oil reserves, production and economic benefits of the Jiangsu oilfield were significantly increased. This exploration strategy included understanding the hydrocarbon generation mechanism of source rocks, progressive evaluation of oil resources, comprehensive research on the faulted systems, the distribution of oil reservoirs and their controlling factors. The techniques used included integration of acquisition, processing and interpretation with 3-D seismics as the core technology, trap description and evaluation, directional drilling and cluster drilling, integration of cuttings logging, gas chromatographic logging and geochemical logging, and integration of early reservoir description and progressive exploration and development. This strategy could be guidance for other complex fault blocks.展开更多
The boundary integral equation method （BIEM） is now widely used in numerical studies on earthquake rupture dynamics, and is proved to be a powerful tool to deal with problems on complex fault system. However, since ...The boundary integral equation method （BIEM） is now widely used in numerical studies on earthquake rupture dynamics, and is proved to be a powerful tool to deal with problems on complex fault system. However, since this method heavily lies on the specific forms of Green＇s function and only the Green＇s function in full-space has a closed analytic expression, it is usually limited to a full-space medium. In this study, as a first step to extend this method to an arbitrary complex fault system in half-space, the boundary integral equations （BIEs） for dynamic strike-slip on vertical complex fault system in half-space are derived based on exact Green＇s function for isotropic and homogeneous half-space. Effect of the geometry of the complex fault system are dealt with carefully. Final BIEs is composed of two parts： contribution from full-space, which has been thoroughly investigated by Aochi and his co-workers by using the Green＇s function for full-space, and that from free surface, which is studied in detail in this study.展开更多
In the middle and second half of oilfield development,further exploration and development of petroleum reservoirs in complex fault blocks are major tasks.Based on the characteristics of fully developed farewell faults...In the middle and second half of oilfield development,further exploration and development of petroleum reservoirs in complex fault blocks are major tasks.Based on the characteristics of fully developed farewell faults in the Wenweigu oil field and the data from 3D earthquakes,RFT,HDT and other techniques,farewell faults and their distribution were identified.Conformation of the fault blocks has been provided and the precision of describing the farewell faults improved.Research technology of farewell faults has applied these methods in this region.展开更多
The quantitatively/semi-quantitatively formation conditions of vertical dominant hydrocarbon migration pathways were analyzed based on the big data analysis of petroleum geological parameters of complex fault Zone zon...The quantitatively/semi-quantitatively formation conditions of vertical dominant hydrocarbon migration pathways were analyzed based on the big data analysis of petroleum geological parameters of complex fault Zone zone in the central-south Bohai Bay. According to this condition, the vertical dominant migration pathway and its charge points/segments are searched through structural modeling assistant analysis in the East Sag of Huanghekou. Under the constraints of charge points/segments, numerical simulation of hydrocarbon charge and migration is carried out to successfully predict hydrocarbon migration pathways and hydrocarbon enrichment blocks in shallow layers of complex fault zone. The main results are as follows:(1) The hydrocarbon charge in shallow layers of the active fault zone is differential, the charge points/sections of vertical dominant migration pathways are the starting points of shallow hydrocarbon migration and are very important for the hydrocarbon migration and accumulation in the shallow layers.(2) Among the shallow faults, those cutting the deep transfer bins or deep major migration pathways, with fault throw of more than 80 m in the accumulation period and the juxtaposition thickness between fault and caprock of the deep layers of less than 400 m are likely to be vertical dominant migration pathways in the sag area.(3) By controlling the vertical dominant migration pathways and charging points/segments in carrier layer, Neo-tectonic movement caused the differential hydrocarbon accumulation in the complex fault zone. The research results are of great significance for the fine exploration of the complex fault zone.展开更多
Fluid flow in hydrocarbon reservoirs and consequently optimum scenario for hydrocarbon production,is heavily influenced by reservoir heterogeneities.Faults are one of the most common types of heterogeneity found in re...Fluid flow in hydrocarbon reservoirs and consequently optimum scenario for hydrocarbon production,is heavily influenced by reservoir heterogeneities.Faults are one of the most common types of heterogeneity found in reservoirs.Leaky faults,baffles(limited extent faults)and complex multiple fault geometries are among the most complicated and important types of faults that are difficult to characterize.Leaky faults,unlike the sealing faults,are in partial communication with other portions of the reservoir.Because of faults'effect on reservoir connectivity and possible infill drilling plan for accessing all parts of the reservoirs,possible communication across the fault must be precisely modeled.In order to detect the effect of a fault on communication within the reservoir,we need to analyze dynamic data.There are a few analytical methods for modelling partially communicating faults,however,these methods may not be accurate enough and may be limited in application,especially in complex situations.Numerical methods(i.e.finite difference or finite element)are also not computationally economical when a large number of grid blocks are simulated.In the current work,the Fast Marching Method(FMM)is applied to effectively mimic fluid flow in the heterogeneous areas,such as complex faults.It is shown that FMM can capture the effect of different fault configurations on the bottom hole pressure and is also able to capture different linear,radial and spherical flows.展开更多
Fault diagnosis is an important measure to ensure the safety of production, and all kinds of fault diagnosis methods are of importance in actual production process. However, the complexity and uncertainty of productio...Fault diagnosis is an important measure to ensure the safety of production, and all kinds of fault diagnosis methods are of importance in actual production process. However, the complexity and uncertainty of production process often lead to the changes of data distribution and the emergence of new fault classes, and the number of the new fault classes is unpredictable. The reconstruction of the fault diagnosis model and the identification of new fault classes have become core issues under the circumstances. This paper presents a fault diagnosis method based on model transfer learning and the main contributions of the paper are as follows: 1) An incremental model transfer fault diagnosis method is proposed to reconstruct the new process diagnosis model. 2) Breaking the limit of existing method that the new process can only have one more class of faults than the old process, this method can identify M faults more in the new process with the thought of incremental learning. 3) The method offers a solution to a series of problems caused by the increase of fault classes. Experiments based on Tennessee-Eastman process and ore grinding classification process demonstrate the effectiveness and the feasibility of the method.展开更多
This paper proposes a novel approach for fault diagnosis of a time-delay complex dynamical network. Unlike the other methods, assuming that the dynamics of the network can be described by a linear stochastic model, or...This paper proposes a novel approach for fault diagnosis of a time-delay complex dynamical network. Unlike the other methods, assuming that the dynamics of the network can be described by a linear stochastic model, or using the state variables of nodes in the network to design an adaptive observer, it only uses the output variable of the nodes to design an observer and an adaptive law of topology matrix in the observer of a complex network, leading to simple design of the observer and easy realisation of topology monitoring for the complex networks in real engineering. The proposed scheme can monitor any changes of the topology structure of a time-delay complex network. The effectiveness of this method is successfully demonstrated by virtue of a complex networks with Lorenz model.展开更多
A fault tolerant synchronization strategy is proposed to synchronize a complex network with random time delays and sensor faults. Random time delays over the network transmission are described by using Markov chains. ...A fault tolerant synchronization strategy is proposed to synchronize a complex network with random time delays and sensor faults. Random time delays over the network transmission are described by using Markov chains. Based on the Lyapunov stability theory and stochastic analysis, several passive fault tolerant synchronization criteria are derived,which can be described in the form of linear matrix inequalities. Finally,a numerical simulation example is carried out and the results show the validity of the proposed fault tolerant synchronization controller.展开更多
As far as the vibration signal processing is concerned, composition ofvibration signal resulting from incipient localized faults in gearbox is too weak to be detected bytraditional detecting technology available now. ...As far as the vibration signal processing is concerned, composition ofvibration signal resulting from incipient localized faults in gearbox is too weak to be detected bytraditional detecting technology available now. The method, which includes two steps: vibrationsignal from gearbox is first processed by synchronous average sampling technique and then it isanalyzed by complex continuous wavelet transform to diagnose gear fault, is introduced. Twodifferent kinds of faults in the gearbox, i.e. shaft eccentricity and initial crack in tooth fillet,are detected and distinguished from each other successfully.展开更多
In Mesozoic-Cenozoic faulted basin in the periphery of Daqing exploration area, the clastic reservoirs mainly consist of siltstone and gravel-bearing sandstone. The electrical conductivity of the reservoirs is complic...In Mesozoic-Cenozoic faulted basin in the periphery of Daqing exploration area, the clastic reservoirs mainly consist of siltstone and gravel-bearing sandstone. The electrical conductivity of the reservoirs is complicated due to the complex pore structures, which cannot be accurately interpreted with commonly used model. In order to solve the problem, a three-water model has been applied in this study based on in-depth analysis of the conductive mechanism of rocks in the explored area, and favorable application results are achieved.展开更多
In this paper, we use the cellular automation model to imitate earthquake process and draw some conclusionsof general applicability. First, it is confirmed that earthquake process has some ordering characters, and it ...In this paper, we use the cellular automation model to imitate earthquake process and draw some conclusionsof general applicability. First, it is confirmed that earthquake process has some ordering characters, and it isshown that both the existence and their mutual arrangement of faults could obviously influence the overallcharacters of earthquake process. Then the characters of each stage of model evolution are explained withself-organized critical state theory. Finally, earthquake sequences produced by the models are analysed interms pf algorithmic complexity and the result shows that AC-values of algorithmic complexity could be usedto study earthquake process and evolution.展开更多
The first-principles method based on the projector augmented wave method within the generalized gradient approximation was employed to calculate the superlattice intrinsic stacking fault（SISF） and complex stacking f...The first-principles method based on the projector augmented wave method within the generalized gradient approximation was employed to calculate the superlattice intrinsic stacking fault（SISF） and complex stacking fault（CSF） energies of the binary Ni3Al alloys with different Al contents and the ternary Ni3Al intermetallic alloys with addition of alloying elements,such as Pd,Pt,Ti,Mo,Ta,W and Re.The results show that the energies of SISF and CSF increase significantly with increase of Al contents in Ni3Al.Addition of Pd and Pt occupying the Ni sublattices does not change the SISF and CSF energies of Ni3Al markedly in comparison with the Ni-23.75Al alloy.While addition of alloying elements,such as Ti,Mo,Ta,W and Re,occupying the Al sublattices dramatically increases the SISF and CSF energies of Ni3Al.The results suggest that the energies of SISF and CSF are dependent both on the Al contents and on the site occupancy of the ternary alloying element in Ni3Al intermetallic alloys.展开更多
Take the lacustrine delta in the second member of Paleogene Shahejie Formation in block Wang43, Dongying depression, Bohai Bay Basin as an example, the deposition architectural characteristics of lacustrine deltaic sa...Take the lacustrine delta in the second member of Paleogene Shahejie Formation in block Wang43, Dongying depression, Bohai Bay Basin as an example, the deposition architectural characteristics of lacustrine deltaic sand bodies controlled by syn-depositional faults in complex fault blocks of rift basin are examined from the aspect of the tectonic-deposition response, using cores, well logs and three-dimensional seismic data. The small-scale syn-depositional faults in complex fault blocks are dense and different in dip, the activity along the strike of syn-depositional fault varies in different positions, and all these control the sedimentary process of deltaic sand bodies. Influenced by syn-depositional faults, the deltaic distributary channel is more likely to pass through the position with weak fault activity, and be deflected or limited at the position with strong fault activity. In downthrown side of a single syn-depositional fault or micro-graben areas, sand bodies increase in thickness and planar scale, and sand bodies of multiple stages are likely to stack over each other vertically. In micro-horst areas controlled by syn-depositional faults, the sand bodies decrease in abundance, and appear in intermittent superimposed pattern vertically. This study can provide new research ideas and theoretical basis for exploration and development research in complex fault blocks.展开更多
针对低压交流配电系统中复杂支路串联电弧故障检测困难、易引发电气火灾的挑战,提出了基于马尔可夫变迁场与可变形自引导Transformer(Markov transition field and deformable convolutional self-guided transformer,MTF-DSGT)的检测...针对低压交流配电系统中复杂支路串联电弧故障检测困难、易引发电气火灾的挑战,提出了基于马尔可夫变迁场与可变形自引导Transformer(Markov transition field and deformable convolutional self-guided transformer,MTF-DSGT)的检测方案。利用马尔可夫变迁场将一维电流信号转换为图像,融合可变形卷积网络(deformable convolutional network,DCN)提取局部特征及自引导Transformer捕捉全局信息,以提高故障识别精度。实验结果显示,该方案在复杂支路电路中检测准确率达99.88%,在Jetson Orin Nano平台测试耗时仅7.78 ms。该方案能高效辨识串联电弧故障,具备实时处理能力,适合边缘设备部署。展开更多
基金Supported by the National Natural Science Foundation of China(60574047)the National High Technology Research and Development Program of China(2007AA04Z168,2009AA04Z154)the Research Fund for the Doctoral Program of Higher Education in China(20050335018)
文摘In industrial processes,there exist faults that have complex effect on process variables.Complex and simple faults are defined according to their effect dimensions.The conventional approaches based on structured residuals cannot isolate complex faults.This paper presents a multi-level strategy for complex fault isolation.An extraction procedure is employed to reduce the complex faults to simple ones and assign them to several levels.On each level,faults are isolated by their different responses in the structured residuals.Each residual is obtained insensitive to one fault but more sensitive to others.The faults on different levels are verified to have different residual responses and will not be confused.An entire incidence matrix containing residual response characteristics of all faults is obtained,based on which faults can be isolated.The proposed method is applied in the Tennessee Eastman process example,and the effectiveness and advantage are demonstrated.
文摘The geological background of the Subei basin is that of small relief subsidence, low geothermal gradient, multi-sedimentary hiatuses, intense reconstruction of the basin, frequent magmatic activity, and a unique combination of source rock and reservoir. This geological background resulted in characteristics such as many small fault blocks, multiple oil-bearing formations, scattered oil distribution, mini- to small-sized reservoirs, and difficulties in exploration. Aimed at such characteristics, an effective exploration strategy was adopted, and the oil reserves, production and economic benefits of the Jiangsu oilfield were significantly increased. This exploration strategy included understanding the hydrocarbon generation mechanism of source rocks, progressive evaluation of oil resources, comprehensive research on the faulted systems, the distribution of oil reservoirs and their controlling factors. The techniques used included integration of acquisition, processing and interpretation with 3-D seismics as the core technology, trap description and evaluation, directional drilling and cluster drilling, integration of cuttings logging, gas chromatographic logging and geochemical logging, and integration of early reservoir description and progressive exploration and development. This strategy could be guidance for other complex fault blocks.
基金supported by the President Fund of GUCAS(No. O85101CM03)National Natural Science Foundation of China(Nos.90715019 and 40821062)partially by National Basic Research Program of China (No.2004CB418404)
文摘The boundary integral equation method （BIEM） is now widely used in numerical studies on earthquake rupture dynamics, and is proved to be a powerful tool to deal with problems on complex fault system. However, since this method heavily lies on the specific forms of Green＇s function and only the Green＇s function in full-space has a closed analytic expression, it is usually limited to a full-space medium. In this study, as a first step to extend this method to an arbitrary complex fault system in half-space, the boundary integral equations （BIEs） for dynamic strike-slip on vertical complex fault system in half-space are derived based on exact Green＇s function for isotropic and homogeneous half-space. Effect of the geometry of the complex fault system are dealt with carefully. Final BIEs is composed of two parts： contribution from full-space, which has been thoroughly investigated by Aochi and his co-workers by using the Green＇s function for full-space, and that from free surface, which is studied in detail in this study.
文摘In the middle and second half of oilfield development,further exploration and development of petroleum reservoirs in complex fault blocks are major tasks.Based on the characteristics of fully developed farewell faults in the Wenweigu oil field and the data from 3D earthquakes,RFT,HDT and other techniques,farewell faults and their distribution were identified.Conformation of the fault blocks has been provided and the precision of describing the farewell faults improved.Research technology of farewell faults has applied these methods in this region.
基金Supported by the National Science and Technology Major Project(2016ZX05024-003)
文摘The quantitatively/semi-quantitatively formation conditions of vertical dominant hydrocarbon migration pathways were analyzed based on the big data analysis of petroleum geological parameters of complex fault Zone zone in the central-south Bohai Bay. According to this condition, the vertical dominant migration pathway and its charge points/segments are searched through structural modeling assistant analysis in the East Sag of Huanghekou. Under the constraints of charge points/segments, numerical simulation of hydrocarbon charge and migration is carried out to successfully predict hydrocarbon migration pathways and hydrocarbon enrichment blocks in shallow layers of complex fault zone. The main results are as follows:(1) The hydrocarbon charge in shallow layers of the active fault zone is differential, the charge points/sections of vertical dominant migration pathways are the starting points of shallow hydrocarbon migration and are very important for the hydrocarbon migration and accumulation in the shallow layers.(2) Among the shallow faults, those cutting the deep transfer bins or deep major migration pathways, with fault throw of more than 80 m in the accumulation period and the juxtaposition thickness between fault and caprock of the deep layers of less than 400 m are likely to be vertical dominant migration pathways in the sag area.(3) By controlling the vertical dominant migration pathways and charging points/segments in carrier layer, Neo-tectonic movement caused the differential hydrocarbon accumulation in the complex fault zone. The research results are of great significance for the fine exploration of the complex fault zone.
文摘Fluid flow in hydrocarbon reservoirs and consequently optimum scenario for hydrocarbon production,is heavily influenced by reservoir heterogeneities.Faults are one of the most common types of heterogeneity found in reservoirs.Leaky faults,baffles(limited extent faults)and complex multiple fault geometries are among the most complicated and important types of faults that are difficult to characterize.Leaky faults,unlike the sealing faults,are in partial communication with other portions of the reservoir.Because of faults'effect on reservoir connectivity and possible infill drilling plan for accessing all parts of the reservoirs,possible communication across the fault must be precisely modeled.In order to detect the effect of a fault on communication within the reservoir,we need to analyze dynamic data.There are a few analytical methods for modelling partially communicating faults,however,these methods may not be accurate enough and may be limited in application,especially in complex situations.Numerical methods(i.e.finite difference or finite element)are also not computationally economical when a large number of grid blocks are simulated.In the current work,the Fast Marching Method(FMM)is applied to effectively mimic fluid flow in the heterogeneous areas,such as complex faults.It is shown that FMM can capture the effect of different fault configurations on the bottom hole pressure and is also able to capture different linear,radial and spherical flows.
文摘Fault diagnosis is an important measure to ensure the safety of production, and all kinds of fault diagnosis methods are of importance in actual production process. However, the complexity and uncertainty of production process often lead to the changes of data distribution and the emergence of new fault classes, and the number of the new fault classes is unpredictable. The reconstruction of the fault diagnosis model and the identification of new fault classes have become core issues under the circumstances. This paper presents a fault diagnosis method based on model transfer learning and the main contributions of the paper are as follows: 1) An incremental model transfer fault diagnosis method is proposed to reconstruct the new process diagnosis model. 2) Breaking the limit of existing method that the new process can only have one more class of faults than the old process, this method can identify M faults more in the new process with the thought of incremental learning. 3) The method offers a solution to a series of problems caused by the increase of fault classes. Experiments based on Tennessee-Eastman process and ore grinding classification process demonstrate the effectiveness and the feasibility of the method.
基金supported in part by the Program for New Century Excellent Talents in University of China (Grant No. NCET-06-0510)the National Natural Science Foundation of China (Grant No. 60874091)
文摘This paper proposes a novel approach for fault diagnosis of a time-delay complex dynamical network. Unlike the other methods, assuming that the dynamics of the network can be described by a linear stochastic model, or using the state variables of nodes in the network to design an adaptive observer, it only uses the output variable of the nodes to design an observer and an adaptive law of topology matrix in the observer of a complex network, leading to simple design of the observer and easy realisation of topology monitoring for the complex networks in real engineering. The proposed scheme can monitor any changes of the topology structure of a time-delay complex network. The effectiveness of this method is successfully demonstrated by virtue of a complex networks with Lorenz model.
基金Sponsored by the National Natural Science Foundation of China(Grant No.61374180)the Science Foundation of Nanjing University of Posts and Telecommunications(Grant No.NY215129)
文摘A fault tolerant synchronization strategy is proposed to synchronize a complex network with random time delays and sensor faults. Random time delays over the network transmission are described by using Markov chains. Based on the Lyapunov stability theory and stochastic analysis, several passive fault tolerant synchronization criteria are derived,which can be described in the form of linear matrix inequalities. Finally,a numerical simulation example is carried out and the results show the validity of the proposed fault tolerant synchronization controller.
基金Provicial Natural Science Foundation of Shanxi,China(No.991051)Provincial Foundation for Homecoming Personnel from Study Abroad of Shanxi,China(No.194-101005)
文摘As far as the vibration signal processing is concerned, composition ofvibration signal resulting from incipient localized faults in gearbox is too weak to be detected bytraditional detecting technology available now. The method, which includes two steps: vibrationsignal from gearbox is first processed by synchronous average sampling technique and then it isanalyzed by complex continuous wavelet transform to diagnose gear fault, is introduced. Twodifferent kinds of faults in the gearbox, i.e. shaft eccentricity and initial crack in tooth fillet,are detected and distinguished from each other successfully.
文摘In Mesozoic-Cenozoic faulted basin in the periphery of Daqing exploration area, the clastic reservoirs mainly consist of siltstone and gravel-bearing sandstone. The electrical conductivity of the reservoirs is complicated due to the complex pore structures, which cannot be accurately interpreted with commonly used model. In order to solve the problem, a three-water model has been applied in this study based on in-depth analysis of the conductive mechanism of rocks in the explored area, and favorable application results are achieved.
文摘In this paper, we use the cellular automation model to imitate earthquake process and draw some conclusionsof general applicability. First, it is confirmed that earthquake process has some ordering characters, and it isshown that both the existence and their mutual arrangement of faults could obviously influence the overallcharacters of earthquake process. Then the characters of each stage of model evolution are explained withself-organized critical state theory. Finally, earthquake sequences produced by the models are analysed interms pf algorithmic complexity and the result shows that AC-values of algorithmic complexity could be usedto study earthquake process and evolution.
基金Project(50871065) supported by the National Natural Science Foundation of ChinaProjects(08DJ1400402,09JC1407200,10DZ2290904) supported by the Science and Technology Committee of Shanghai Municipality,China
文摘The first-principles method based on the projector augmented wave method within the generalized gradient approximation was employed to calculate the superlattice intrinsic stacking fault（SISF） and complex stacking fault（CSF） energies of the binary Ni3Al alloys with different Al contents and the ternary Ni3Al intermetallic alloys with addition of alloying elements,such as Pd,Pt,Ti,Mo,Ta,W and Re.The results show that the energies of SISF and CSF increase significantly with increase of Al contents in Ni3Al.Addition of Pd and Pt occupying the Ni sublattices does not change the SISF and CSF energies of Ni3Al markedly in comparison with the Ni-23.75Al alloy.While addition of alloying elements,such as Ti,Mo,Ta,W and Re,occupying the Al sublattices dramatically increases the SISF and CSF energies of Ni3Al.The results suggest that the energies of SISF and CSF are dependent both on the Al contents and on the site occupancy of the ternary alloying element in Ni3Al intermetallic alloys.
基金Supported by the China National Science and Technology Major Project(2016ZX05011-002,2016ZX05010-001,2016ZX05011-001)the National Basic Research Program(973)Program(2015CB250901)the National Natural Science Foundation of China(41902122)
文摘Take the lacustrine delta in the second member of Paleogene Shahejie Formation in block Wang43, Dongying depression, Bohai Bay Basin as an example, the deposition architectural characteristics of lacustrine deltaic sand bodies controlled by syn-depositional faults in complex fault blocks of rift basin are examined from the aspect of the tectonic-deposition response, using cores, well logs and three-dimensional seismic data. The small-scale syn-depositional faults in complex fault blocks are dense and different in dip, the activity along the strike of syn-depositional fault varies in different positions, and all these control the sedimentary process of deltaic sand bodies. Influenced by syn-depositional faults, the deltaic distributary channel is more likely to pass through the position with weak fault activity, and be deflected or limited at the position with strong fault activity. In downthrown side of a single syn-depositional fault or micro-graben areas, sand bodies increase in thickness and planar scale, and sand bodies of multiple stages are likely to stack over each other vertically. In micro-horst areas controlled by syn-depositional faults, the sand bodies decrease in abundance, and appear in intermittent superimposed pattern vertically. This study can provide new research ideas and theoretical basis for exploration and development research in complex fault blocks.
文摘针对低压交流配电系统中复杂支路串联电弧故障检测困难、易引发电气火灾的挑战,提出了基于马尔可夫变迁场与可变形自引导Transformer(Markov transition field and deformable convolutional self-guided transformer,MTF-DSGT)的检测方案。利用马尔可夫变迁场将一维电流信号转换为图像,融合可变形卷积网络(deformable convolutional network,DCN)提取局部特征及自引导Transformer捕捉全局信息,以提高故障识别精度。实验结果显示,该方案在复杂支路电路中检测准确率达99.88%,在Jetson Orin Nano平台测试耗时仅7.78 ms。该方案能高效辨识串联电弧故障,具备实时处理能力,适合边缘设备部署。
